Name: Robinson Racing 7857 Steel Idler Gear Slash/Rustler/Stampede
Brand: Robinson Racing
SKU: 7857
Price: 299.00 NOK
Availability: OutOfStock

Traxxas 9494 Input Gear 22T with Shaft Magnum 272R ...

Traxxas 9494 Input gear, 22-tooth/ input shaft (transmission) (heavy duty) (fits Bandit, Rustler®, Stampede®, Slash 2WD)

129,-

139,-

KJØP

-7%

Traxxas 9480 Diff Assembly Complete with Oil (500K) ...

Traxxas 9480 Diff Assembly Complete with Oil (500K) Drag Slash Differential assembly (complete) (assembled with 500K oil) (fits Drag Slash)

549,-

599,-

KJØP

-8%

RPM 81162 RPM Wide Front Bumper for 2WD Bandit, ...

RPM Wide Front Bumper for 2WD Bandit, Rustler & Stampede - Black Replaces stock Traxxas #2735 Quick Notes: Fits the Electric Stampede, Electric Rustler, Bandit, Nitro Sport, Nitro Stampede & Nitro Rustler Replaces stock Traxxas #2735 Give your favorite Traxxas vehicle added protection with the RPM wide front bumper. This bumper stands six inches wide and adds an extra 1-1/2” worth of bulletproof, RPM protection to the front end of the vehicle. RPM designed this bumper with the backyard basher in mind by making it with our guaranteed unbreakable blend of nylons and is molded in black, blue, green and red. This bumper will help reduce front-end damage during head on collisions with curbs, trees, etc!

99,-

Ikke på lager

STRC ALUMINUM STEERING BELLCRANK SET (W/BEARINGS) ...

STRC ALUMINUM STEERING BELLCRANK SET (W/BEARINGS) FOR SLASH/RUSTLER/BANDIT (GM) CNC Machined Aluminum Steering Bellcrank system features a 3 piece design featuring single CNC machined solid aluminum main bellcrank, providing slop-free, precision steering response (unlike other 2 pieces bolt together design of other manufactures). Included: steering bellcrank set 4 pieces of bearings f

299,-

KJØP

RPM 80905 Mount for Rear Bumper or Wheelie Bar for 2WD ...

RPM Mount for Rear Bumper or Wheelie Bar for 2WD Slash, Rustler, Stampede & Bandit - Blue Replaces Traxxas stock #3677 Quick Notes: Fits Traxxas 2WD Slash, Rustler, Stampede & Bandit Replaces Traxxas stock #3677 After hearing numerous requests to look into the rear bumper mount on the Traxxas Slash, we found several issues that could use the RPM touch. Those same problems were encountered on e-Rustler, e-Stampede & Bandit vehicles as well, using the stock wheelie bar mount. The problem – the stock mount uses only a single screw on the gear cover side to hold the mount in place. That causes a hinge effect under rear impacts causing the slotted area holding on to the rear skid plate to pop off after an impact, leaving the stock bumper / wheelie bar mount hanging under the chassis. The RPM solution… An all-new bumper mounting system that eliminates all of the problems encountered with the stock version. The RPM rear bumper / wheelie bar mount has two mounting holes on the gear cover side and three on the motor side – that’s two additional mounting points to eliminate that annoying hinge effect mentioned above. The additional mounting screws help disperse impact energy into the transmission case over more surface area, reducing the possibility of damaging the case significantly! The new RPM mount design means no more slotted parts hanging below the rear skid plate – ever! Our mount tucks up quite nicely behind the skid plate for better rear end ground clearance. Our rear bumper / wheelie bar mount fits a wide range of vehicles too. It fits all versions of the Traxxas Slash 2wd, electric Stampede, electric Rustler and Bandit including VXL, XL-5 and legacy versions. The RPM rear bumper / wheelie bar mount is molded in our nearly indestructible blend of nylons and is sold in either blue or black. Each mount comes with all necessary hardware, complete instructions for ease of installation and an industry-leading warranty to back it all up! Tech Notes: The RPM Rear Bumper Mount replaces Traxxas #3677.

139,-

KJØP

RPM 73612 Hybrid Gearbox Housing/Rear Mounts Black

Gearbox Housing and Rear Mounts for the Traxxas Slash 2wd, e-Rustler, e-Stampede & Bandit Quick Notes: – fits the Traxxas Slash 2wd, Bandit, electric Rustler & electric Stampede 2wd – replaces stock Traxxas #3691 & #3691A – hybrid nylon / aluminum for a lightweight, yet strong gearbox – intuitive mounting system allows individual removal of the gearbox or A-arm mounts – matching Gear Cover also available – replacement Rear Mounts available Description The RPM Hybrid Gearbox Housing and Rear Mounts for Traxxas 2wd vehicles is designed to solve a multitude of issues with stock and other aftermarket transmission housings. Our gearbox housing and mounts are a blend of aluminum and molded nylon parts for the perfect combination of strength, durability and heat dissipation. Check out this awesome list of included features: Aluminum Motor Plate: Manufactured in the USA from 3mm thick, 6061 T6 aluminum for serious strength and durability. Locks in gear mesh for worry-free pinion to spur settings, eliminating fears of exploding spur and pinion gears from an overheated stock transmission case. Offers significant motor heat dissipation for cooler motor temperatures, unlike stock plastic motor plates that insulate the motor. Not integrated with the rear bumper mounts, meaning rear impacts will not bend the motor plate, (when used with a rear bumper or bumper mounting system such as RPM #80902 or #80905). Molded Gearbox Housings: Molded from our blend of bulletproof nylons in three popular color choices for guaranteed durability, strength and style. Retains stock bumper mounting holes for positive, solid support of any bumper or wheelie bars you may choose. Retains a stock “cover” for the motor, adding motor protection where most aftermarket housings leave the motor completely exposed to rear impacts. We modified our housing to eliminate the huge bottom hole in the stock housing, keeping your internal gears cleaner longer. Quiet! With a completely enclosed gearbox housing, you’ll no longer have the loudest transmission on the track. Redesigned exterior features are smoother; making it less likely dirt will adhere or build up on the case. Separate housing and rear mounts means transmission maintenance won’t affect suspension settings. Molded Rear Mounts (0° & 3° Rear Mounts Included) Separate from the gearbox housing and easy to access. Each mount is individually accessible and removable without removing the transmission or vice versa. Simply unbolt 2 screws (and a hinge pin) to remove an A-arm mount or 6 screws to remove the transmission! Sold with two sets of rear mounts in each package – 0° and 3° rear mounts are included. Molded from the RPM blend of ultra durable, long lasting, bulletproof nylons. Molded mounts means tighter tolerances and less slop than with machined components for better camber and toe angle retention. Each RPM Gearbox Housing kit is available in black, green or blue and comes will all necessary mounting hardware and instructions. Whether racing or bashing, the RPM Gearbox Housing is one of the least expensive yet most valuable options you can buy! Every RPM Gearbox Housing kit is proudly designed and manufactured in the USA! Get yours today! Tech Notes: RPM Gearbox Housings do not include internal components (gears bearings, shafts, etc.). Internal components (either stock or aftermarket) must be transferred to the RPM Gearbox Housing from the stock Traxxas transmission. RPM Gearbox Housings replace stock Traxxas #3691 (or #3691A). Due to the amount of strengthening material we added to the rear mounts, some modification of stock a-arms may be needed to allow free suspension movement. This slight interference issue is nonexistent when used with RPM rear a-arms. Slash 2wd LCG Chassis Notes: The Traxxas Slash LCG Chassis is slightly longer than the standard chassis so some modification of the back end may be necessary. A 45° chamfer, a radius or shortening the chassis by a small amount corrects the issue.

399,-

449,-

KJØP

-11%

Traxxas 3767G Shock Caps Green

These are the Green Aluminum Shock Caps from Traxxas. FEATURES: Aluminum construction, green in color Fits all Traxxas Ultra Shocks INCLUDES: Four Shock Caps REQUIRES: Installation on the shocks

179,-

189,-

KJØP

-5%

RPM 80912 Motor Protector Black ...

RPM Motor Protector for 2WD Rustler, Stampede, Bandit & Slash* - Black Quick Notes: Transmission mounts are sold separately Fits Traxxas 2WD Bandit, Rustler & Stampede Also fits 2WD Slash - please see “Tips” below for important information Many Traxxas electric vehicles have a motor that is dangerously exposed to impacts and damage from rear impacts or collisions. Our new rear Motor Protector eliminates that problem! How did we solve it? We started with an RPM rear bumper mount / wheelie bar mount (RPM #80902 or #80905) and extended the reach with this simple add-on piece, which completely blocks the motor from most rear impacts. A stock Traxxas rear bumper mount / wheelie bar mount – Traxxas #3677 – can be used with this motor protector as well. Traxxas Slash owners running in the unlimited class or those that simply want to drop a huge amount of rear end weight can eliminate the stock rear bumper and mount the RPM Motor Protector in place of the stock bumper to prevent damage to the end-bell and motor. For the ultimate in rear end protection, a second motor protector can be bolted to the opposite side of the rear bumper mount / wheelie bar mount (gear cover side) to help protect the gears and gear cover from extreme rear-end impacts. The RPM motor protector can be used on any vehicle that can run the Traxxas #3677 rear bumper mount / wheelie bar mount including the Bandit, e-Stampede, e-Rustler & Slash as well as a number of Traxxas legacy models. Our Motor Protector is molded from our ultra-durable blend of nylons and is backed by our limited lifetime warranty. Tech Notes: Images show both the motor protector and transmission mount (sold separately). To use the RPM Motor Protector in conjunction with a Slash 2wd rear bumper or Traxxas wheelie bar, please see “Tips” below. With included hardware, it must be used in place of either the bumper or wheelie bar. A Traxxas rear bumper mount / wheelie bar mount (Traxxas #3677) or an RPM rear bumper / wheelie bar mount (RPM #80902 or #80905) must be installed prior to installing the RPM Motor Protector (not included). Slash Tips: Thanks to RPM customer Reed S. for this tip on how to use our Motor Protector in conjunction with a stock Slash 2wd rear bumper. Using the spacers shown in the photo of the parts tree below, slip the spacers in place of the stock shoulder crews that attach the stock bumper to the mount, then use 2 – M3 x 20mm Cap Screws (not included) in place of the the RPM mounting screws that come supplied with the RPM Motor Protector.

89,-

KJØP

Traxxas 4683 Spur Gear 48P 83T

This is a 48P, 83T Spur Gear for models with Traxxas Torque Control Slipper Clutch. FEATURES: 48 pitch 83 tooth Designed for models with a slipper clutch. Black plastic construction INCLUDES: One spur gear SPECS: Pitch: 48 Tooth: 83

39,-

Ikke på lager

RPM 80522 Gear Cover - Black Replaces TRX 3792

RPM Gear Cover for 2WD Rustler, Stampede, Bandit & Slash - Black Replaces the stock Traxxas #3792 Quick Notes: Fits all versions of the Traxxas 2WD Rustler, Stampede, Bandit & Slash Not recommended for spur gears larger than the stock 87 teeth Replaces the stock Traxxas #3792 The most recent electric versions of the Rustler, Stampede, Bandit and Slash 2wd have several new features that caused interference issues with our original RPM molded gear cover for the Stampede & Rustler. We expanded the area of the gear cover over the motor shaft to compensate for the longer motor shaft of the XL-5 & VXL motors. We narrowed two areas along the perimeter of the gear cover to allow clearance for the rear bumper / wheelie bar mount as well. These changes now allow this gear cover to fit all versions of these awesome vehicles. Additional features designed into these gear covers include such important aspects as: An oversized access hole and soft plug for easy access to the slipper clutch nut while still maintaining an unmatched seal of the gear mesh area. Our plug stays in place yet is easy to remove and install. Completely sealed. Stock gear covers have a large, open gap between the spur gear and the out-drive that allows gear destroying dirt to enter. Sleek contours that would look great on any vehicle. More clearance for larger pinions for owners hungry for speed. Retains all stock geometry for easy bolt up; no cutting or gluing required. Not only do they look great, they will protect those expensive gears like nothing else available! RPM‘s new gear cover will pay for itself the very first time you run through the dirt and nothing enters your gear case. No more blown gears from rocks and debris! RPM Gear Covers for the electric versions of the Traxxas Stampede 2wd, Rustler, Bandit and Slash 2wd are sold in black, green, blue or red and carry our limited lifetime warranty against failure due to materials or workmanship issues. Tech Notes: Replaces stock Traxxas #3792. Does not include provisions for telemetry. Not recommended for spur gears larger than the stock 87 teeth.

99,-

Ikke på lager

Traxxas 1771 Tire Spiked 2.1" Front (2)

This is a pair of replacement tires for the Traxxas line of cars. FEATURES A blend of natural and synthetic rubber in a step pin configuration. INCLUDES 2 tires per package. SPECIFICATIONS: Inside diameter: 2.1" Outside diameter: 3.25" Width: .75"

109,-

KJØP

Traxxas 3735 Bumper Front Kit (for LED Lights) Bandit, ...

Bumper, front/ 4x12 CCS (2) (fits 2WD Rustler® or Bandit®) (for LED light kit installation)

79,-

KJØP

Traxxas 7171 Wheels, dished 2.2'' (white)

Wheels, dished 2.2" (white) (2)

79,-

KJØP

Traxxas 2443 Camber Link Rear 56mm(cc) Complete (2)

Turnbuckles, camber link, 36mm (56mm center to center) (rear) (assembled with rod ends and hollow balls) (1 left, 1 right)

79,-

89,-

KJØP

-11%

RPM 73754 Front Bulkhead Green 1/10 Traxxas 2WD

Front Bulkhead for most 1:10 scale Traxxas 2wd Vehicles Quick Notes: – replaces stock Traxxas #2530 & #2530A – fits the Slash 2wd, Nitro Slash, Bandit, electric Rustler, nitro Rustler, nitro Stampede & electric Stampede 2wd (including all Stampede 2wd variants) Description One of the most highly sought-after RPM parts is finally here! The RPM Front Bulkhead for 1:10 scale Traxxas 2wd vehicles is the ultimate in design, strength and durability. Our engineers reviewed the stock front bulkhead and found something curious. The stock front bulkhead does not sit flat, which can seriously affect suspension settings and adjustments! The RPM Front Bulkhead sits flawlessly level, meaning your front kick angle and A-arm angles will be perfect, providing a superior platform for precise suspension adjustments. We also cored out the bottom of the bulkhead. Why? First and foremost, it helps the bulkhead sit flat. Next, it significantly reduces the weight of the bulkhead. Our version is more that 15% lighter* than stock! By coring out the bottom of the bulkhead, it allows a convenient place to stick some modeling clay to adjust the weight bias of the truck. Leave the weight out if you want the front light; add it in if you want it heavier. We also include a handy dust plate to cover the bottom of the bulkhead on vehicles such as the Rustler, Stampede and Bandit that leave the bottom exposed. The dust plate prevents build-up of dirt and debris, which could affect the handling and weight of the truck. Each RPM Front Bulkhead is built from our bulletproof blend of engineering grade nylons, made right here in the USA and comes with our limited lifetime warranty against breakage. If you want strength you can count on and engineering you can trust, look no further than RPM! Tech Notes: RPM Front Bulkheads for 2wd Traxxas 1:10 scale vehicles are stock replacement parts and replace stock Traxxas #2530 & #2530A. This bulkhead fits the following vehicles: Slash 2wd, Nitro Slash, Bandit, electric Rustler, nitro Rustler, nitro Stampede & electric Stampede 2wd (including all Stampede 2wd variants). It does not fit the 4×4 versions of any of these vehicles.

159,-

179,-

KJØP

-11%

Hovedbilde Traxxas 1770 Spiked Rear Tire 2.15

Traxxas 1770 Spiked Rear Tire 2.15" (2)

This is a pair of replacement tires for the Traxxas line of cars. FEATURES A blend of natural and synthetic rubber in a step pin configuration. INCLUDES 2 tires per package. SPECIFICATIONS: Inside diameter: 2.15" Outside diameter: 3.25" Width: 1.5"

139,-

KJØP

Traxxas 2656T Shock Shafts Titanium XX-Long (2)

These are the Optional Titanium Nitride coated XX-long Shock Shafts from Traxxas. FEATURES: Features a Titanium Nitride coating for increased durability. These shock shafts have a Gold color finish. INCLUDES: Two XX-Long Shock Shafts REQUIRES: Two XX-long Traxxas shocks SPECS: Length- 2.1"(52.8mm) Diameter- 0.1"(3mm)

119,-

KJØP

Traxxas 1664T Shock Shafts Long Nitro Rustler (2)

There are the Long Shock Shafts for the Traxxas Nitro Rustler. FEATURES: Hardened steel and titanium nitride coated (Brass color) INCLUDES: Two shafts REQUIRES: Installation in shock SPECS: Diameter: 3mm (0.118") Length: 47 mm (1.85") Thread: 3mm (0.118") COMMENTS: Uses 3mm e-clips

119,-

KJØP

Traxxas 2444 Camber Link Front 67mm(cc) Complete (2) ...

Turnbuckles, camber link, 47mm (67mm center to center) (front) (assembled with rod ends and hollow balls) (1 left, 1 right)

89,-

KJØP

Traxxas 3678A Wheelie Bar Assembled Green

This is an optional Wheelie Bar in Green for the Traxxas Electric Stampede, Rustler and Bandit. FEATURES: Constructed of hardened plastic, neon green in color Installs at rear of chassis to prevent vehicle from flipping over during wheelies INCLUDES: Assembled optional Wheelie Bar with mounting instructions and hardware REQUIRES: Fastening to rear of chassis

179,-

KJØP

Yeah Racing TRSL-015RBU HD Tool Steel Rear Universal ...

Yeah Racing HD Tool Steel Rear Universal Drive Shafts for Traxxas 1/10 Slash Stampede 4X4 Blue HD Universal drive shafts for Traxxas's 4x4 version of Slash and Stampede, made from "Tool Grade Steel", giving good tensile strength. Whilst the middle sleeve is made from Aluminum to keep weight low giving a good balance between weight and strength! Features: For: Traxxas 1/10 Slash Stampede 4X4 Material: Steel/Aluminum Includes: Universal Drive Shafts (2 pcs) Accessories (1 pack)

379,-

399,-

KJØP

-5%

Traxxas 8946 Servo Saver Set Maxx

Steering bellcranks/ bellcrank support/ servo saver/ servo saver spring/ draglink/ 3x20mm shoulder screws (2)

85,-

KJØP

Traxxas 8715X Speed Bit Set Hex Drive ...

Speed Bit Set, hex driver, 4-piece straight (1.5mm, 2.0mm, 2.5mm, 3.0mm), 1/4" drive

469,-

549,-

KJØP

-15%

Traxxas 3956 Spur Gear 0.8P 54T

This is the 54 Tooth Spur Gear. FEATURES: Nylon construction Black in color .8 Module pitch INCLUDES: One 54T 0.8 Pitch Spur Gear REQUIRES: Assembly onto vehicle

39,-

KJØP

Hovedbilde Pro-Line 271504 Split Six 2.2

Pro-Line 271504 Split Six 2.2"/3.0" Red/Black BeadLock ...

Disse felgene har 12 mm hex. Pro-Line 2715-04 - 1/10 Split Six Rear 2.2"/3.0" 12mm Short Course Wheels (2) Red/Black This is a pair of Split Six 2.2"/3.0" SC Wheels. Hey there all you Slash® fans, check out Pro-Line's 2.2" x 3.0" Bead-Loc wheels for your truck. Innovative wheel design and improved Bead-Loc for an all in one complete wheel package it's the Split Six. NOTE: Pro-Line bead-loc wheels work with Pro-Line tires ONLY due to the inner webbing bead design Features: One sided Bead-Loc captures both sides of tire evenly 3-piece design for easy install and no gluing of tires. Wheel made from high-strength, durable DuPont nylon material Six stainless steel button head screws included per wheel. Button Head Hardware size 2mm hex, 3mm threads, 10mm long. 2.2" front side for realistic look and 3.0" back side for suspension clearance Same track width as stock wheels A deep, sating black finish on all Split Six wheels. Bead-Locs available in red finish WARNING: Not recommended for high speeds with trucks >2S. NOTE: Pro-Line bead-loc wheels work with Pro-Line tires only due to the inner webbing bead design. Made in the USA Fits: Slash® 2wd Rear Slash® 4x4 Front or Rear AE DR10 Rear In The Bag: (2) Split Six Wheels (2) Bead-Loc Sleeves (2) Die Cast Bead-Loc Rings (12) Stainless Steel Button Head Screws Specs: Quantity Option: 2 in a package Wheel Hex Size: 12mm Wheel Type: Split Six Color: Red Scale: 1/10 Package Type: Wheels Only Inner Tire / Outer Wheel Diameter: 2.2 / 3.0 in Front or Rear: 2WD Rear, 4x4 Front & Rear Vehicle Type: Short Course Truck

379,-

399,-

KJØP

-5%

Robinson Racing 7857 Steel Idler Gear Slash/Rustler/Stampede

Informasjon

Produsent

Robinson Racing

Kunder kjøpte også

SamiRC Norge AS

Om oss

Kundeservice

Totalt:

Søkeresultater

Robinson Racing 7857 Steel Idler Gear Slash/Rustler/Stampede

Informasjon

Produsent

Robinson Racing

Kunder kjøpte også

Totalt:

Tamiya El-biler

Kyosho-Biler

Mini-Z

Carson

Tamiya Lastebiler

Reservedeler til Lastebil

Reservedeler til Hengere

E-flite RC

Traxxas & Latrax Reservedeler

Sendere

Spektrum sendere

Spektrum mottakere

Mottakere

Spektrum Mottakere

Telemetri

Hitec

Servoer

Servoer etter størrelse

Reservedeler

Option-parts

Option Parts Biler

Tamiya Biler

Servo anbefalinger til biler

Maverick biler

Traxxas biler

Kyosho biler

Mini-Z biler

Tamiya biler

HPI Biler

Redcat

Servo anbefalinger til båt

Crawler motor & regulator

Børsteløs/Brushless

Børsteløs combo

Børsteløs motor

Børsteløs Bil motor

Børsteløs regulator

Reservedeler til motorer

Flymotorer

OS motorer

Lipo

Lipo 3 celler 11.1 volt

3 celler sortert etter plugg

Lipo 4 celler 14,8 volt

4 celler sortert etter plugg

NiMH

Mottakerbatteri

Batteri etter produsent

LiFe

Traxxas Biler

Traxxas 68086-4 Slash 4x4 VXL

Traxxas Båter

Alle fly

Redcat Biler

Maverick biler

Kyosho biler

Kyosho Mini-Z

HPI biler

Reservedeler etter Produsent

Traxxas El-Biler

Arrma

Traxxas Nitro-Biler

Tamiya El-Biler

TT-01

Axial El-Biler

SCX10 Honcho

Kyosho-El-biler

Mini-Z deler

Kyosho Fazer D2 FZD2

Utgåtte Kyosho biler

Kyosho Nitro Biler

RC4WD-Biler

Vaterra-Biler

WL-Toys