UKENS TILBUD

6s 3000mAh - 60C - Gens Ace EC5 GEA6S300060E5

Art.nr: B-60C-3000-6S1P

Copied

LiPo-pakke som leveres med ferdig påloddet EC5-plugg. Batteripakken er laget for RC helikopter. Passer også til mange større elektrofly, båter og biler. Spesifikasjoner: Kapasitet: 3000mAh Spenning: 6S 22.2V Vekt: 496gram Størrelse: 140x43x39mm Strømplugg: EC5

749,-

999,-

KJØP

-25%

Eflite T-28 Trojan 1.1m PNP

Art.nr: EFL08275

Copied

Eflite T-28 Trojan 1.1m PNP The E-flite® T-28 Trojan 1.1m updates the longtime sport scale favorite with modern-day upgrades, making it even better equipped for scale-like and sport flying — plus higher speeds and higher energy aerobatics so it’s more fun to fly than ever before! Key Features Updated and upgraded to offer improved scale-like and sport flying, higher speed and higher energy aerobatic capabilities Easy to take off, fly and land, making it a perfect "next step" after a trainer, an excellent first scale or low-wing model In The Box (1) E-flite® T-28 Trojan 1.1m with: (1) Brushless Outrunner Motor (installed) (1) 30A Brushless ESC (installed) (4) Servos (installed) (1) Product Manual Needed to Complete (1) Full-range 4+ Channel Transmitter and Receiver (1) 3S 11.1V or 4S 14.8V 1800–2200mAh LiPo with EC3™ or IC3™ Connector (1) Compatible LiPo Charger Introduction NEW MOVES FROM AN OLD FAVORITE Introduced as a ParkZone® model more than a decade ago, the T-28 Trojan 1.1m quickly became a favorite of low-time to experienced pilots alike! It had the scale looks of the North American Aviation T-28 Trojan used as a trainer by the Navy from 1952 to 1984, yet flew better than most sport RC models because of its incredible handling with no bad habits. The model's simplicity, durability, and easy handling made it especially popular with low-time pilots moving up to their first sport, low wing or warbird model after mastering a trainer. Plus, the convenient size allowed it to be flown at large parks and sports fields and transported easily without disassembly. Now the T-28 has been updated and upgraded to be more powerful, more capable, and more fun to fly than ever before! Stronger and reinforced parts combine with the more powerful 3S and 4S compatible power system featuring a telemetry-capable ESC to deliver higher speeds and higher energy aerobatic performance — while offering the same slow and scale-like, sport flying and easy handling capabilities the original was always known for. Features Updated and upgraded to offer improved scale-like and sport flying, higher speed and higher energy aerobatic capabilities Easy to take off, fly and land, making it a perfect "next step" after a trainer, an excellent first scale or low-wing model Specially tuned motor compatible with 3S and 4S batteries without the need for modifications or upgrades Popular 3S and 4S 1800–2200mAh batteries deliver excellent performance and flight times Easy to fly with innovative and optional-use SAFE® Select flight envelope protection 4-channel control with four (4) factory-installed servos and linkages for full aerobatic capability Stronger motor mount, nose gear steering arm, and wing spar for added reinforcement Lightweight yet durable composite-reinforced EPO construction Factory-finished in a fully-painted, high-visibility trim scheme Fast and easy assembly – no glue required Overview A T-28 AT THE TOP OF ITS CLASS Updated and upgraded, including a fully-painted, high-visibility trim scheme, the E-flite® T-28 Trojan 1.1m reaffirms its status as an excellent "next step" model for low-time pilots who have mastered a trainer and are looking for their first low-wing, sport or warbird model — while expanding its performance for experienced pilots with higher speed and higher energy aerobatic capabilities! With a common 3S 1800–2200mAh LiPo battery, the brushless power system featuring a specially-tuned motor delivers plenty of thrust and speed for low-time to intermediate pilots. Or, install a 4S battery for more speed and unlimited vertical performance without modifications or upgrades! Four servos and linkages are factory-installed for full aerobatic capability to perform loops, rolls, knife-edge, inverted flying, and more. The composite-reinforced EPO airframe includes stronger parts to handle the higher speeds and additional aerobatic capabilities, and for improved durability overall. Final assembly is fast and easy, no glue required, and the T-28 fits into almost any vehicle fully assembled — or the wing can be removed for even easier transport and storage. Any traditional RC flying field with paved, dirt or grass surfaces makes a suitable flying site, although skilled pilots can fly in smaller areas such as large parks or sports fields. The T-28 is inherently stable like the full-scale trainer platform, but the BNF® Basic version, featuring a Spektrum™ AR631 receiver, gives low-time and intermediate pilots the added benefits of exclusive AS3X® and optional-use SAFE® Select stabilization technologies. Best of all the ESC included with both versions is telemetry-capable to deliver real-time battery voltage, current, motor RPM, and other data via compatible receivers (including the AR631 included with the BNF Basic version) and Spektrum™ AirWare™ equipped transmitters. And it all adds up to offer improved scale-like and sport flying, higher speed and higher energy aerobatic capabilities to deliver a sport scale flying experience you simply can't get anywhere else! More Capable The lightweight yet durable composite-reinforced EPO airframe has been updated to handle more power, higher speeds and higher energy aerobatics. A stronger motor mount and nose gear steering arm, plus a new spar to better reinforce the wing, combine to make the T-28 Trojan 1.1m more capable than ever before. More Powerful The factory-installed brushless power system features a 30-amp telemetry-capable ESC plus a specially-tuned motor to deliver an abundance of thrust with a 3S LiPo battery, or more speed and unlimited vertical performance with a 4S battery without the need for any modifications or upgrades. Telemetry Capable The T-28 Trojan 1.1m is equipped with an ESC that can provide a variety of real-time power system related telemetry data including motor RPM, current, battery voltage and more via compatible receivers (including the AR631 installed in the BNF® Basic version) and Spektrum™ AirWare™ equipped transmitters (including the DX6e and 8e, DX6 G2/G3 and 8 G2, the DX9, the NX6, 8 and 10, the iX12, iX20 and others) while you fly. Easy Assembly No glue is required for final assembly, and you can have the T-28 Trojan 1.1m ready to fly in less time than it takes to charge a battery! And although it's conveniently sized to fit fully assembled in just about any vehicle, you can also remove the wing for even easier storage and transport. Plug-N-Play® Completion Level This Plug-N-Play (PNP) model comes out of the box with a factory-installed power system and servos that are ready to connect to the compatible receiver of your choice (sold separately). Simply install the receiver, finish any final assembly, and fly! Product Specifications Charger Sold Separately Receiver Sold Separately Radio Sold Separately Minimum Required Radio 4-channel Product Weight 1080g (38oz) with 4S battery, 855g (30oz) without battery Landing Gear Fixed, tricycle type Motor Type Brushless Speed Control Included Wing Area 314 sq. in. (20.3 sq. dm) Battery Sold Separately Motor Size 3626 Product Length 36" (914 mm) Steering Steerable nose gear Flaps No Material EPO Completion Level Plug-N-Play Minimum Speed Control 30A Propeller Size 9.5 Recommended Motor Battery 4S 2200mA 30C LiPo Power Type Electric Servos Included Skill Level Level 2 Trim Scheme Colors Yellow and black Wingspan 44" (1118 mm)

2.495,-

3.295,-

KJØP

-24%

RC4WD Kober Rear Bed w/Tire Holder & Mud Flaps

Art.nr: C0458

Copied

Kober Rear Bed w/Tire Holder & Mud Flaps for RC4WD TF2 LWB Toyota LC70 (White) Specifications: ABS Plastic Injection Molding Stainless Steel Quality Wood Hand Welded White Powder-coated Finish Total Length: 9.74in / 247.5mm Total Width: 7.84in / 199.2mm Total Height: 6.22in / 158.1mm Weight: 43.58oz / 1235.5g Shown installed on RC4WD TF2 LWB w/ Land Cruiser LC70 Body Set Bundle with RC4WD Mickey Thompson 1.55" Baja MTZ P3 Scale Tires (Z-T0058), RC4WD Dick Cepek Fun Country 1.55" Scale Tires (Z-T0124),Cruiser 1.55" Aluminum Wheels (Raw) and RC4WD 90mm Old Man Emu Nitrocharger Sport Shocks by ARB (Z-D0038) for example (Not included) What’s Included: 1x Kober Rear Bed w/Tire Holder & Mud Flaps for RC4WD TF2 LWB Toyota LC70 (White) 1x Long Metal Mount 1x Short Metal Mount 2x Light Mount Sets 2x Mud Flaps 1x Steel Button Head Cap Screw M4 x 30mm 2x Steel Button Head Cap Screws M3 x 8mm (Z-S0652) 4x Steel Button Head Cap Screws M3 x 6mm (Z-S0651) 4x Cross Head Cap Screws M2 x 4mm 4x Cross Head Cap Self Tapping Screws M2 x 7mm (Black) 8x Cross Head Cap Screws M1 x 4mm (Silver) 1x Nylock Nut M4 (Silver) (Z-S1265) 6x Regular M3 Black Nuts (Z-S0872) 4x Regular M2 Black Nuts (Z-S1144) 1x Spare Tire Nut M4 Replacement Hardware: Steel Button Head Cap Screws M3 x 8mm (Z-S0652) Steel Button Head Cap Screws M3 x 6mm (Z-S0651) Nylock Nut M4 (Silver) (Z-S1265) Regular M3 Black Nuts (Z-S0872) Replacement Part: Kober Rear Bed w/Tire Holder for RC4WD TF2 LWB Toyota LC70 (White) (VVV-C0457) Optional Colors: Kober Rear Bed w/Tire Holder for RC4WD TF2 LWB Toyota LC70 (Silver)(VVV-C0460) Kober Rear Bed w/Tire Holder for RC4WD TF2 LWB Toyota LC70 (Black) (VVV-C0462) Notes: Fits RC4WD TF2 LWB w/ Land Cruiser LC70 Body Set Bundle (Discontinued) Fits RC4WD Trail Finder 2 Truck Kit "LWB" 1/10 Scale Long Wheel Base Chassis Kit (Z-K0059)

1.995,-

2.995,-

KJØP

-33%

Tamiya 58697 Astute 2022 (TD2) 2WD Kit 1:10

Art.nr: 58697

Copied

Tamiya 58697 Astute 2022 (TD2) 2WD Kit 1:10 Tamiya brings yet another off-road buggy to its vast library of high-performance and fun to build R/C kits. This is the Astute 2022, which is based on the new TD2 chassis. TD2 chassis at a glance: The new TD2 chassis is based around the TD4 chassis. Just like the TD4 machine, it employs a front inboard suspension layout which offers exceptionally slim, low-profile form. Its front suspension arms have a skid angle of 25 degrees, for amazing ground-hugging and stable performance, plus CVA oil dampers to allow smooth suspension movement. Furthermore, the chassis is based on a one-piece monocoque frame, uses the same ball differential as the ones used on the TD4 chassis, plus full ball bearings are used throughout the driveline. The battery pack is positioned transversely and positioned to the rear. Finally, a midship transverse motor layout with 3 gears connecting it to the drivetrain provide optimum balance and improved performance. FEATURES: 1/10 R/C assembly kit. Length: 387mm, width: 246mm. Wheelbase: 283mm. Polycarbonate body. Ribbed front and rear square spike tires facilitate stability and great grip. Newly designed star dish design front wheels are attached by hex hubs. 4-wheel double wishbone suspension system uses CVA oil dampers for supple performance. Choose between high and low type wing stays to adjust the downforce set up of the buggy. Driver figure included for extra realism. REQUIRES: 2-channel radio steering servo ESC 540-size motor 7.2-7.4volt battery with compatible charger Tamiya PS paint to complete Morsom byggevideo:

3.195,-

3.995,-

KJØP

-20%

Tamiya 58733 Toyota Supra (JZA80) BT-01 Kit No ESC

Art.nr: 58733

Copied

The 2WD BT-01 is a NEW chassis that offers radio control hobbyists’ choices of FF/MR/FR drive system based upon the drive system of the actual car your body recreates. The body included in the first release depicts the fourth generation Toyota Supra (JZA80) which was announced as a Toyota flagship sports car in 1993. Its top grade RZ model employed a 3-liter inline-6 twin turbo engine capable of 280hp, 6-speed transmission, 4-wheel double wishbone suspension and ventilated disc brakes for front and rear. The muscular form and high-spec performance mesmerized fans all over the world and achieved success in motorsports races. About the BT-01 Chassis: The 2WD BT-01 chassis gives the choice of two types of wheelbases, and front-or rear-wheel drive system. Without removing the battery pack, motor, and R/C equipment setups from the center frame, simply change attachment directions of final gears and steering linkage to switch between front-and rear-wheel drive; front (FR) or midship rear (MR) motor position can be chosen for rear-wheel drive cars. The 4-wheel double wishbone suspension features symmetrical structure and friction dampers. Unitized sections such as the motor mount, final gears and suspension facilitate ese of assembly and effective maintenance. • Length: 397mm, width: 185mm. Wheelbase: 257mm / 251mm (*). • The 2WD BT-01 chassis gives a choice of two types of wheelbases (*), and front- or rear- wheel drive system. • Without removing battery pack, motor, and R/C equipment setups from the center frame, simply change attachment directions of final gears and steering linkage to switch between front- and rear-wheel drive; front (FR) or midship rear (MR) motor position can be chosen for rear-wheel drive cars. (Six setups are available in total.) • The 4-wheel double wishbone suspension features symmetrical structure and friction dampers. • Unitized sections such as motor mount, final gears and suspension facilitate ease of assembly and effective maintenance. Toyota Supra Kit Specifications: • 1/10 scale R/C model assembly kit. Length: 457mm, width: 185mm, height: 135mm. Wheelbase: 257mm. • The form of the Toyota Supra (JZA80) is realistically recreated in lightweight polycarbonate. • 10-spoke one-piece wheels (silver color) are paired with racing radial tires. • Separate molded plastic parts: mirrors, wing, light cases. • Includes 540-brushed motor. • Required to complete: 2-channel radio, ESC, steering servo, 7.2-7.4volt battery with compatible charger, and Tamiya PS paint.

1.495,-

2.095,-

KJØP

-29%

"Bulk" Tamiya TBLE-02S Brush & Brushless ESC

Art.nr: BULK 45057

Copied

*** This is a Brand new item taken from a kit (chopped part), therefore will not have a Tamiya packaging *** NB NB denne kommer uten sensorkabel. This ESC is especially designed for use with the TBLM series of Tamiya Brushless Motors (Sensored-Type, 10.5T, 12.5T, 14.5T, 16.5T). Brake and neutral brake settings can be adjusted independently, and it features 3 protection systems against overheating, overloading and low voltage. It is also compatible with brushed motors (Normal Type 540 and Sports-Tuned Motors 25 Turn or higher). Note: When using servos with a current exceeding 1.5A, BEC output may be shut down.

549,-

799,-

KJØP

-31%

Kyosho Mini-Z 32362AG MR04 RWD Sauber Mercedes C9 LM ...

Art.nr: 32362KR

Copied

Latest high-performance MR-04 chassis Now the standard MINI-Z RWD model! Enjoy the full experience of high-performance R/C car racing right out of the box; just insert batteries into the car and transmitter. This is the simplicity of Kyosho Readyset packages. The small scale of the MINI-Z Racer is ideal for driving indoors and for people just becoming familiar with R/C cars. This MINI-Z RWD Readyset includes a renewed 2-wheel drive chassis at its core. Previous Readyset packages incorporated the 3rd generation MR-03 chassis, but the new RWD Readyset includes the 4th generation MR-04 chassis that was first released in 2023. While retaining some basic elements of the MR-03 design, the new MR-04 demonstrated its lower center of gravity and remodeled steering design with blistering speed and excellent handling in the top-of-the-line EVO2 debut model. The MR-04 chassis is mounted with R/C system and features a completed body finished to display model standard. This Readyset includes the same standard MR-04 chassis as other high-end MR-04 models and includes user-friendly 130-class brushed motor and the reliable Syncro KT-531P pistol grip transmitter. Just insert 4 x AAA alkaline batteries into both the car and the transmitter, and you’re ready for the fun to begin. High-performance comes straight from the standard setup, but you can tune up for elite-level performance with a wide range of MINI-Z optional parts. With its dynamic maneuverability display model finish, the updated MR-04 chassis takes the authentic R/C experience to a higher level. - Authentic EP (electric) small scale R/C car that can be driven indoors. - Readyset package includes fully assembled chassis, body and transmitter. - Includes ultra reliable multi-function Syncro KT-531P transmitter. - Features the MR-04 chassis, a major evolution from the previous MR-03 model. - Includes high-quality painted body with decals applied, finished to display model standard. - Geared differential (gear diff) delivers smooth cornering. - Full ball bearing specifications - Can be fitted with an optional gyro unit (MZW711) for even easier control. Gyro sensitivity can be adjusted using the volume on the chassis. - Compatible with wide range of MINI-Z Racer optional parts so you can enjoy tuning and enhancing your model. While retaining the best aspects of the MR-03, the lower center of gravity of the new MR-04 delivers significant performance improvements. The easier control of the MR-04 makes it an ideal introduction to R/C cars. New front knuckles with integrated kingpins reduce scrub by 1.5mm on each side compared to the MR-03, realizing sharper and more linear control. The change to 3mm inner diameter ball bearings also reduces rotational resistance. Front suspension dynamically aligns the camber angle with movement of the upper arm to maintain optimal tire contact during cornering. Revised caster angle also delivers improved steering response. The car is powered by four AAA alkaline or rechargeable nickel-metal hydride batteries. The batteries are mounted lower than the MR-03, lowering the center of gravity of the entire chassis to deliver improved cornering stability and straight-line handling. The rear suspension uses a coil spring damper to cushion shocks from the road surface and improve driving stability. It can also be upgraded to an optional oil-filled shock absorber. Flexibility of the T-bar rear suspension plate that holds the entire rear pod, including the motor and rear axle, produces excellent suspension effect. Optional parts are also available in FRP and carbon. In 2025, All axles are equipped with low rotational resistance ball bearings as standard. The same size ball bearings are used for both front and rear for spare parts efficiency. When changing from the standard body, a parts set is included to change the front tread (vehicle width) to match the non-standard body to be installed. Rear tread can be changed by changing the wheel offset. Includes Syncro KT-531P transmitter with a steering wheel that mimics the steering wheel of a real car and pistol-grip throttle (speed control). Adjust the neutral position of steering and throttle with trims, as well as steering angle with dual rate adjustment. It is also possible to operate in training mode with a reduced vehicle speed (training mode is the default setting).

2.495,-

3.495,-

KJØP

-29%

Hovedbilde Proline 1/6 Hyrax XL G8 Front/Rear 2.9

Proline 1/6 Hyrax XL G8 Front/Rear 2.9" Rock Crawling ...

Art.nr: 10186-14

Copied

Pro-Line oppgir at de passer direkte på standard Axial SCX6 2.9" beadlock-felg. Dekkene er 185 × 70 mm. Proline 1/6 Hyrax XL G8 Front/Rear 2.9" Rock Crawling Tires (2) Key Features Designed for Maximum Performance Highly Detailed Sidewall for Scale Looks Stepped Blocks & Multiple Sipes Create Unmatched Grip Tackle Tough Terrain in Scale Style Made in the Legendary G8 Compound In The Box (2) Hyrax XL 2.9" G8 Rock Terrain Tires for SCX6™ (2) Open Cell Foam Inserts Features: Designed for Maximum Performance Highly Detailed Sidewall for Scale Looks Stepped Blocks & Multiple Sipes Create Unmatched Grip Tackle Tough Terrain in Scale Style Made in the Legendary G8 Compound Overview: Take your SCX6™ to the ultimate level of rock-climbing performance with Pro-Line's Hyrax XL Tire in G8 compound! Designed from the ground up for incredible grip and stability on the toughest terrain, the Hyrax XL 2.9" tire is ready to tackle anything your Axial® SCX6™ can dish out. The Hyrax features an aggressive open tread pattern with each tread block containing multiple sipes for improved traction and comes in at a massive 7.28" tall and 2.75" wide. The highly detailed connected tread on the sidewall of the Hyrax extends out for added scale realism and sidewall rigidity to help prevent traction rolls. The Hyrax is made from the same G8 compound as the 1.9" crawler tires, so you know it provides the performance and durability that you can depend on. This tire will fit directly onto the stock 2.9" SCX6™ bead-loc wheel. Don't get left behind, take your adventure to the next level with Pro-Line's Hyrax tires! Please note: All tires & wheels are sold in pairs, unless otherwise noted Hyrax XL 2.9" G8 Rock Terrain Tires (2) for Axial® SCX6™ Front or Rear Fits: Axial® SCX6™ (AXI05000T1 / AXI05000T2) Product Specifications Manufacturer # 10186-14 Product Width 2.75" (70 mm) Insert Material Open Cell Product Height 7.28" (185 mm) Quantity Option 2 in a package Tire Compound G8 (Soft Rock) Wheel Position Front/Rear Package Type Tires and Inserts Tire Type Rock Crawling Track Surface Rock Crawling Inner Tire / Outer Wheel Diameter 2.9 in Compound / Hardness Soft Rock Scale 1/6 Vehicle Type Rock Crawler Tire Tread Hyrax

199,-

599,-

KJØP

-67%

Proline 3576-00 Body Strikeforce Crawler 313mm ...

Art.nr: 3576-00

Copied

Proline 1/10 Strikeforce Clear Body 12.3" (313mm) Wheelbase Scale Crawlers Key Features Perfect for your Next Scale Military Build Based on Full-size Light Combat Vehicles Used by the Armed Forces Add-on Blast Proof Windows and Air Filter Cap Included Separate Cab and Bed Allows for Further Customization Made in the USA In The Box (1) Strikeforce Clear Body (Cab + Bed) (1) Paint then Peel Overspray Film (1) Decal Sheet (1 Set) Window Masks (1 Set) Cab to Bed Mounting Hardware - M3 x 6mm Button Head Cap Screws (6pcs) and M3 Nuts (6 pcs) Features: Perfect for your Next Scale Military Build Based on Full-size Light Combat Vehicles Used by the Armed Forces Add-on Blast Proof Windows and Air Filter Cap Included Separate Cab and Bed Allows for Further Customization Detailed Decals Complete the Military Look Paint Then Peel Overspray Film Included Made with Crystal Clear Polycarbonate Made in the USA, since 1982 Four steps to Mission Ready: Clean Body and apply included window mask Paint then peel the over-spray film off Sticker your body (decal sheet included) Mount your new body onto your 12.3" Crawler Overview: Pro-Line is proud to introduce a combat-ready body for scale crawlers that is ready to strike fear into the hearts of the enemy: the Strikeforce clear body. Based on full-size light combat vehicles used by the armed forces, this body is perfect for your next military-themed build. The Strikeforce provides a blank canvas for completing your mission directive, whether it requires a general-purpose military vehicle, a utility vehicle, or even a weapons carrier. The Strikeforce features detailed front grill, hood, and roof shapes that mimic the real thing, and the body even includes add-on blast-proof windows and air filter cap to complete the military look. The bed is separate from the cab, which allows so many scale options for you to custom-build your ideal vehicle. The decal sheet includes extra details to make the Strikeforce come to life like window bolts and door hinges. The Strikeforce is molded in our durable .060" polycarbonate and comes with window masks, Paint-then-peel overspray film, and decals. Complete your Strikeforce with Pro-Line's Military-inspired paint set (PRO632304)! Now is the time to strike - get your own Pro-Line Strikeforce body for your 12.3" Crawler now! This is sold as a clear and unpainted body. Image of the painted body is only to display details. No vehicle chassis is included with this product. Fits: SCX10™ Ascender® Element Enduro Other 12.3" Wheelbase Crawlers Product Specifications Manufacturer # 3576-00 Material Polycarbonate Product Height 5.8" (147 mm) Product Length 20" (508 mm) Product Width 9" (229 mm) Color Clear Scale 1/10 Vehicle Type Rock Crawler Wheelbase 12.3" (312 mm)

399,-

899,-

KJØP

-56%

Kyosho 32350RG Mini-Z RWD Honda Raybrig NSX Concept-GT ...

Art.nr: 32350RG

Copied

Kyosho Mini-Z RWD Honda Raybrig NSX Concept-GT 2014 (W-MM/KT531P) RWD series is a Rear-Wheel Drive design that emphasizes superior handling paired with the Syncro KT-531P Transmitter. With just 8 x AAA-size batteries, the MINI-Z Racer allows anyone to enjoy the beautiful style and advanced performance of R/C cars. First launched in 2013, Kyosho has renewed the MINI-Z Racer Sports MR-03 concept to be even more user-friendly and appealing to more drivers with the MINI-Z RWD series! Widely popular body styles in highly detailed body sets create the incredibly realistic model lineup. Including the latest Syncro KT-531P transmitter with steering trim, throttle trim, dual rate, LED control function, the sponge grip of the steering wheel provides comfortable fit for precision control feel. The set also includes a car body finished to display-model standard that matches stunning style with the performance, reliability and durability of the MR-03 chassis. The new control program on the newly designed circuit board realizes linear handling characteristics and can be further enhanced for even easier control by installing the optional gyro unit (MZW446). This series represents the perfect package for a deep dive into the amazing world of R/C cars! *Syncro KT-531P transmitter uses FHSS 2.4GHz and is not compatible with existing ASF/MHS/FHS 2.4GHz systems. ●New series includes the newly developed Syncro KT-531P transmitter with multiple setting options. ●New circuit board with newly developed control program realizes dramatically improved steering feel. ●Highly detailed display-standard body is fully factory finished. ●Full ball bearing specifications include 7 bearings, previously an optional upgrade. ●Compatible with all MINI-Z Racer body styles. **Motor case and diff gear assembly to suit body are required to be purchased separately. ●Front suspension incorporates VCS that optimizes camber angle with suspension stroke. ●Compatible with optional gyro unit (MZW446). Volume of gyro effect can be adjusted on the chassis. (**Settings can be adjusted from the transmitter if using KT-432PT transmitter (sold separately)). Bearing the name of legendary F1 driver, Ayrton Senna, this GTR McLaren GTR features circuit-tuned power from the 4-liter V8 twin-turbo engine generating 825 horsepower, and special aero specifications. Enlarged front splitter and dive planes are immaculately recreated. Rear wing, stepped louvres and diffuser are immaculately recreated. Includes stylish design of Syncro KT-531P transmitter. Features steering / throttle trim as well as dual rate adjustment of steering angle. In addition, the transmitter has a Training Mode feature which limits speed of the car for easy learning(default setting at the time of shipment is Training Mode). As the chassis is based on the proven MR-03 design, existing parts for the MR-03 and the optional gyro unit (MZW446) can be installed to enhance driving control. Tread can be set to narrow or wide by changing steering tie rods,front lower and upper plates. Wheelbase can also be changed to suit body style. (**Changing requires parts to be purchased separately). Compatible with huge lineup of optional parts for MR-03 that allows you to improve your machine according to your skill level and budget. Technical Data: ■Length 181.2mm ■Width 78.0mm ■Height 47.75mm ■Wheelbase 98.0mm （LL） ■Tread F:66.5mm R:65.0mm ■Chassis RWD(MR-03) ■Motor Mount MM ■Front Wheel Offset Narrow +2.5mm(for RWD) ■Rear Wheel Offset Wide +3.0mm(for RWD) ■R/C System Syncro KT-531P ●Factory assembled chassis ●Pre-painted plastic body, complete with markings ●2.4GHz Perfex KT-531P 2.4GHz transmitter ●Front tread adjustment parts set ●Front suspension adjustment spacers ●Pinion gears 6T, 7T, 8T, 9T ●Wheel wrench ●Pinion gear tool ●Spare nuts ●Pairing stick ●Tires, wheels ●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis. ●AAA-size alkaline batteries x 4 for transmitter

2.495,-

3.495,-

KJØP

-29%

Kyosho 32358OR Mini-Z MR04 RWD Porsche 911 GT3 RS ...

Art.nr: 32358OR

Copied

Latest high-performance MR-04 chassis Now the standard MINI-Z RWD model! Enjoy the full experience of high-performance R/C car racing right out of the box; just insert batteries into the car and transmitter. This is the simplicity of Kyosho Readyset packages. The small scale of the MINI-Z Racer is ideal for driving indoors and for people just becoming familiar with R/C cars. This MINI-Z RWD Readyset includes a renewed 2-wheel drive chassis at its core. Previous Readyset packages incorporated the 3rd generation MR-03 chassis, but the new RWD Readyset includes the 4th generation MR-04 chassis that was first released in 2023. While retaining some basic elements of the MR-03 design, the new MR-04 demonstrated its lower center of gravity and remodeled steering design with blistering speed and excellent handling in the top-of-the-line EVO2 debut model. The MR-04 chassis is mounted with R/C system and features a completed body finished to display model standard. This Readyset includes the same standard MR-04 chassis as other high-end MR-04 models and includes user-friendly 130-class brushed motor and the reliable Syncro KT-531P pistol grip transmitter. Just insert 4 x AAA alkaline batteries into both the car and the transmitter, and you’re ready for the fun to begin. High-performance comes straight from the standard setup, but you can tune up for elite-level performance with a wide range of MINI-Z optional parts. With its dynamic maneuverability display model finish, the updated MR-04 chassis takes the authentic R/C experience to a higher level. - Authentic EP (electric) small scale R/C car that can be driven indoors. - Readyset package includes fully assembled chassis, body and transmitter. - Includes ultra reliable multi-function Syncro KT-531P transmitter. - Features the MR-04 chassis, a major evolution from the previous MR-03 model. - Includes high-quality painted body with decals applied, finished to display model standard. - Geared differential (gear diff) delivers smooth cornering. - Full ball bearing specifications - Can be fitted with an optional gyro unit (MZW711) for even easier control. Gyro sensitivity can be adjusted using the volume on the chassis. - Compatible with wide range of MINI-Z Racer optional parts so you can enjoy tuning and enhancing your model. While retaining the best aspects of the MR-03, the lower center of gravity of the new MR-04 delivers significant performance improvements. The easier control of the MR-04 makes it an ideal introduction to R/C cars. New front knuckles with integrated kingpins reduce scrub by 1.5mm on each side compared to the MR-03, realizing sharper and more linear control. The change to 3mm inner diameter ball bearings also reduces rotational resistance. Front suspension dynamically aligns the camber angle with movement of the upper arm to maintain optimal tire contact during cornering. Revised caster angle also delivers improved steering response. The car is powered by four AAA alkaline or rechargeable nickel-metal hydride batteries. The batteries are mounted lower than the MR-03, lowering the center of gravity of the entire chassis to deliver improved cornering stability and straight-line handling. The rear suspension uses a coil spring damper to cushion shocks from the road surface and improve driving stability. It can also be upgraded to an optional oil-filled shock absorber. Flexibility of the T-bar rear suspension plate that holds the entire rear pod, including the motor and rear axle, produces excellent suspension effect. Optional parts are also available in FRP and carbon. In 2025, All axles are equipped with low rotational resistance ball bearings as standard. The same size ball bearings are used for both front and rear for spare parts efficiency. When changing from the standard body, a parts set is included to change the front tread (vehicle width) to match the non-standard body to be installed. Rear tread can be changed by changing the wheel offset. Includes Syncro KT-531P transmitter with a steering wheel that mimics the steering wheel of a real car and pistol-grip throttle (speed control). Adjust the neutral position of steering and throttle with trims, as well as steering angle with dual rate adjustment. It is also possible to operate in training mode with a reduced vehicle speed (training mode is the default setting).

2.495,-

3.295,-

KJØP

-24%

Eflite 11.1V 450mAh 3S 30C LiPo Battery: JST

Art.nr: EFLB4503SJ30

Copied

11.1V 450mAh 3S 30C LiPo Battery: JST Key Features Capable of maximum continuous discharge rates up to 30C Equipped with balancing leads and a connector that are compatible with most balancers and balancing chargers Equipped with JST connector on main power leads Perfect battery for small indoor 3D, aerobatic, sport, or scale airplanes using Park 300 and Park 370 motors on 3S applications. Overview E-flite High-Power Series Lithium Polymer Batteries offer an excellent blend of weight, power and performance. Available in a wide variety of capacities and voltages, there's a battery perfect for almost any application, from indoor slow flyer to large-scale sport and aerobatic airplane models as well as micro to mid-sized helicopter models. Product Specifications Cell Configuration 3S1P Battery Voltage 11.1V Charge Protection Circuitry No Battery Type LiPo (3.7V per cell) Wire Gauge 18 AWG Number of Cells 3 Connector Type JST Battery Capacity 300-999mAh

249,-

429,-

KJØP

-42%

Maverick 27084 - Mounted Wheels and Tyres 2 Pcs (Vader ...

Art.nr: MV27084

Copied

Maverick 27084 - Mounted Wheels and Tyres 2 Pcs (Vader XB)

999,-

1.799,-

KJØP

-44%

Savox SH-1257MG digital small size 0.07 speed/2,6kg. ...

Art.nr: SH-1257MG

Copied

Dimension : 35.0*15.0*29.2 Weight : 29.5g Rated Voltage : 6.0V Operating Speed : 0.07sec°/60 Torque : 2.5kg-cm

549,-

899,-

KJØP

-39%

Populært i denne kategorien

SamiRC Norge AS

Om oss

Kundeservice

Totalt:

Søkeresultater

UKENS TILBUD

Populært i denne kategorien

Totalt:

Tamiya El-biler

Kyosho-Biler

Mini-Z

Carson

Tamiya Lastebiler

Reservedeler til Lastebil

Reservedeler til Hengere

E-flite RC

Traxxas & Latrax Reservedeler

Sendere

Spektrum sendere

Spektrum mottakere

Mottakere

Spektrum Mottakere

Telemetri

Hitec

Servoer

Servoer etter størrelse

Reservedeler

Option-parts

Option Parts Biler

Tamiya Biler

Servo anbefalinger til biler

Maverick biler

Traxxas biler

Kyosho biler

Mini-Z biler

Tamiya biler

HPI Biler

Redcat

Servo anbefalinger til båt

Crawler motor & regulator

Børsteløs/Brushless

Børsteløs combo

Børsteløs motor

Børsteløs Bil motor

Børsteløs regulator

Reservedeler til motorer

Flymotorer

OS motorer

Lipo

Lipo 3 celler 11.1 volt

3 celler sortert etter plugg

Lipo 4 celler 14,8 volt

4 celler sortert etter plugg

NiMH

Mottakerbatteri

Batteri etter produsent

LiFe

Traxxas Biler

Traxxas 68086-4 Slash 4x4 VXL

Traxxas Båter

Alle fly

Redcat Biler

Maverick biler

Kyosho biler

Kyosho Mini-Z

HPI biler

Reservedeler etter Produsent

Traxxas El-Biler

Arrma

Traxxas Nitro-Biler

Tamiya El-Biler

TT-01

Axial El-Biler

SCX10 Honcho

Kyosho-El-biler

Mini-Z deler

Kyosho Fazer D2 FZD2

Utgåtte Kyosho biler

Kyosho Nitro Biler

RC4WD-Biler

Vaterra-Biler

WL-Toys

HAIBOXING Biler

Helion-biler

BSD Biler