Traxxas 120074-1 TXC-4M 1/18 Extreme Crawler Blue RTR ...

Art.nr: TRX 120074-1-BLUE

Copied

Traxxas 120074-1-BLUE – TXC-4M 1/18 Extreme Crawler RTR – Blue 1/18 scale 4WD rock crawler with 3S brushless power, portal axles, oil-filled GTM Pro shocks and TQ™ 2.4 GHz radio. Ready-To-Drive® with 11.1 V 250 mAh 3S LiPo battery and USB charger with iD®. TXC-4M™ Extreme Crawler is a compact rock crawler built around a lightweight tube-frame body and a one-piece molded monocoque chassis. Portal axles, triangulated 4-link suspension and a 60° steering angle give it the clearance and agility for technical climbing lines, while the 3S brushless outrunner system combines precise low-speed control on the rocks with real trail speed between obstacles. This version comes with blue body panels and decals. TXC-4M is rated skill level 1 and is delivered fully assembled with battery and charger. Only four AA batteries for the transmitter and a USB-A power source are needed to get started. Features Clipless tube-frame body with replaceable body panels, interior with driver figure and mounting points for accessory LED light kits One-piece molded composite monocoque chassis – battery and ESC sit low on opposite sides for balanced weight distribution 3S brushless outrunner motor, 3350 Kv, with laser-etched can and pre-installed pinion gear Waterproof 3S brushless ESC with Field Oriented Control (FOC), 6 V BEC, LiPo overvoltage protection and two-stage low-voltage detection Three drive profiles: Sport, Trail with trail-tuned drag brake, and Crawl with instant reverse and 100 % hill-holding brake Full-time shaft-driven 4WD with locked steel spool axles and 25 % overdrive on the front axle Portal axles with 2-gear portals, all-metal gears and sealed ball bearings for more ground clearance and less torque twist Single-speed transmission with all-metal gears and ball bearings Heavy-duty CV center driveshafts, plus steel driveshafts and U-joints out to the wheels Triangulated 4-link suspension front and rear with high-clearance lower links and lay-down shocks Oil-filled GTM Pro shocks with anodized aluminum bodies and springs mounted under the shock body for a realistic look 60° steering angle with waterproof high-torque 2265 metal-gear servo, high-throw metal servo horn and direct steering (no servo saver) Steel front portal weights and steel front axle cover for a low center of gravity and better resistance to rollovers 1.3-inch Method Race Wheels® 105 Beadlock replica wheels (3-piece, 7 mm hex) with 1.3 x 2.8-inch Stone Claw™ tires and foam inserts TQ™ Compact 2.4 GHz 2-channel transmitter with removable color-matched grip adapter. The receiver also works with TQi transmitters and has dual servo and LED channels Rust-resistant coated hex hardware and sealed ball bearings Included TXC-4M Extreme Crawler, fully assembled and Ready-To-Drive®, with clipless tube-frame body 3S brushless power system (3350 Kv motor and waterproof ESC) TQ™ Compact 2.4 GHz 2-channel transmitter 11.1 V 250 mAh 3S LiPo battery with iD® USB quick charger with iD® Maintenance tools Required (not included) 4 x AA alkaline batteries for the transmitter USB-A power source, 2 A and 5 V recommended as a minimum Specifications Scale: 1/18 Type: Trail / rock crawler, 4WD Skill level: 1 Length: 234 mm Width / track: 149 mm Height: 107 mm Wheelbase: 168 mm Ground clearance (center): 43 mm Weight: 467 g Driveline: Shaft-driven 4WD, locked spools front and rear Transmission: Single speed, internal gear ratio 74.1:1 Steering servo: 2265, waterproof, metal gear, 75 oz-in (approx. 5.4 kg-cm) Motor: 3S sensorless brushless outrunner, 3350 Kv, 24 x 16 mm, 18 g ESC: 3S brushless, waterproof, 6 V BEC, 34 x 25 x 14 mm, 26 g Battery: 3S LiPo 11.1 V 250 mAh with iD® Battery compartment: 41 x 22 x 14 mm Radio system: TQ™ Compact 2.4 GHz, 2 channels

3.695,-

3.995,-

KJØP

-8%

Traxxas 120074-1 TXC-4M 1/18 Extreme Crawler Green RTR ...

Art.nr: TRX 120074-1-Green

Copied

Traxxas 120074-1-GREEN – TXC-4M 1/18 Extreme Crawler RTR – Green 1/18 scale 4WD rock crawler with 3S brushless power, portal axles, oil-filled GTM Pro shocks and TQ™ 2.4 GHz radio. Ready-To-Drive® with 11.1 V 250 mAh 3S LiPo battery and USB charger with iD®. TXC-4M™ Extreme Crawler is a compact rock crawler built around a lightweight tube-frame body and a one-piece molded monocoque chassis. Portal axles, triangulated 4-link suspension and a 60° steering angle give it the clearance and agility for technical climbing lines, while the 3S brushless outrunner system combines precise low-speed control on the rocks with real trail speed between obstacles. This version comes with blue body panels and decals. TXC-4M is rated skill level 1 and is delivered fully assembled with battery and charger. Only four AA batteries for the transmitter and a USB-A power source are needed to get started. Features Clipless tube-frame body with replaceable body panels, interior with driver figure and mounting points for accessory LED light kits One-piece molded composite monocoque chassis – battery and ESC sit low on opposite sides for balanced weight distribution 3S brushless outrunner motor, 3350 Kv, with laser-etched can and pre-installed pinion gear Waterproof 3S brushless ESC with Field Oriented Control (FOC), 6 V BEC, LiPo overvoltage protection and two-stage low-voltage detection Three drive profiles: Sport, Trail with trail-tuned drag brake, and Crawl with instant reverse and 100 % hill-holding brake Full-time shaft-driven 4WD with locked steel spool axles and 25 % overdrive on the front axle Portal axles with 2-gear portals, all-metal gears and sealed ball bearings for more ground clearance and less torque twist Single-speed transmission with all-metal gears and ball bearings Heavy-duty CV center driveshafts, plus steel driveshafts and U-joints out to the wheels Triangulated 4-link suspension front and rear with high-clearance lower links and lay-down shocks Oil-filled GTM Pro shocks with anodized aluminum bodies and springs mounted under the shock body for a realistic look 60° steering angle with waterproof high-torque 2265 metal-gear servo, high-throw metal servo horn and direct steering (no servo saver) Steel front portal weights and steel front axle cover for a low center of gravity and better resistance to rollovers 1.3-inch Method Race Wheels® 105 Beadlock replica wheels (3-piece, 7 mm hex) with 1.3 x 2.8-inch Stone Claw™ tires and foam inserts TQ™ Compact 2.4 GHz 2-channel transmitter with removable color-matched grip adapter. The receiver also works with TQi transmitters and has dual servo and LED channels Rust-resistant coated hex hardware and sealed ball bearings Included TXC-4M Extreme Crawler, fully assembled and Ready-To-Drive®, with clipless tube-frame body 3S brushless power system (3350 Kv motor and waterproof ESC) TQ™ Compact 2.4 GHz 2-channel transmitter 11.1 V 250 mAh 3S LiPo battery with iD® USB quick charger with iD® Maintenance tools Required (not included) 4 x AA alkaline batteries for the transmitter USB-A power source, 2 A and 5 V recommended as a minimum Specifications Scale: 1/18 Type: Trail / rock crawler, 4WD Skill level: 1 Length: 234 mm Width / track: 149 mm Height: 107 mm Wheelbase: 168 mm Ground clearance (center): 43 mm Weight: 467 g Driveline: Shaft-driven 4WD, locked spools front and rear Transmission: Single speed, internal gear ratio 74.1:1 Steering servo: 2265, waterproof, metal gear, 75 oz-in (approx. 5.4 kg-cm) Motor: 3S sensorless brushless outrunner, 3350 Kv, 24 x 16 mm, 18 g ESC: 3S brushless, waterproof, 6 V BEC, 34 x 25 x 14 mm, 26 g Battery: 3S LiPo 11.1 V 250 mAh with iD® Battery compartment: 41 x 22 x 14 mm Radio system: TQ™ Compact 2.4 GHz, 2 channels

3.695,-

3.995,-

KJØP

-8%

Traxxas 120074-1 TXC-4M 1/18 Extreme Crawler Orange ...

Art.nr: TRX 120074-1-ORNG

Copied

Traxxas 120074-1-ORANGE – TXC-4M 1/18 Extreme Crawler RTR – Orange 1/18 scale 4WD rock crawler with 3S brushless power, portal axles, oil-filled GTM Pro shocks and TQ™ 2.4 GHz radio. Ready-To-Drive® with 11.1 V 250 mAh 3S LiPo battery and USB charger with iD®. TXC-4M™ Extreme Crawler is a compact rock crawler built around a lightweight tube-frame body and a one-piece molded monocoque chassis. Portal axles, triangulated 4-link suspension and a 60° steering angle give it the clearance and agility for technical climbing lines, while the 3S brushless outrunner system combines precise low-speed control on the rocks with real trail speed between obstacles. This version comes with blue body panels and decals. TXC-4M is rated skill level 1 and is delivered fully assembled with battery and charger. Only four AA batteries for the transmitter and a USB-A power source are needed to get started. Features Clipless tube-frame body with replaceable body panels, interior with driver figure and mounting points for accessory LED light kits One-piece molded composite monocoque chassis – battery and ESC sit low on opposite sides for balanced weight distribution 3S brushless outrunner motor, 3350 Kv, with laser-etched can and pre-installed pinion gear Waterproof 3S brushless ESC with Field Oriented Control (FOC), 6 V BEC, LiPo overvoltage protection and two-stage low-voltage detection Three drive profiles: Sport, Trail with trail-tuned drag brake, and Crawl with instant reverse and 100 % hill-holding brake Full-time shaft-driven 4WD with locked steel spool axles and 25 % overdrive on the front axle Portal axles with 2-gear portals, all-metal gears and sealed ball bearings for more ground clearance and less torque twist Single-speed transmission with all-metal gears and ball bearings Heavy-duty CV center driveshafts, plus steel driveshafts and U-joints out to the wheels Triangulated 4-link suspension front and rear with high-clearance lower links and lay-down shocks Oil-filled GTM Pro shocks with anodized aluminum bodies and springs mounted under the shock body for a realistic look 60° steering angle with waterproof high-torque 2265 metal-gear servo, high-throw metal servo horn and direct steering (no servo saver) Steel front portal weights and steel front axle cover for a low center of gravity and better resistance to rollovers 1.3-inch Method Race Wheels® 105 Beadlock replica wheels (3-piece, 7 mm hex) with 1.3 x 2.8-inch Stone Claw™ tires and foam inserts TQ™ Compact 2.4 GHz 2-channel transmitter with removable color-matched grip adapter. The receiver also works with TQi transmitters and has dual servo and LED channels Rust-resistant coated hex hardware and sealed ball bearings Included TXC-4M Extreme Crawler, fully assembled and Ready-To-Drive®, with clipless tube-frame body 3S brushless power system (3350 Kv motor and waterproof ESC) TQ™ Compact 2.4 GHz 2-channel transmitter 11.1 V 250 mAh 3S LiPo battery with iD® USB quick charger with iD® Maintenance tools Required (not included) 4 x AA alkaline batteries for the transmitter USB-A power source, 2 A and 5 V recommended as a minimum Specifications Scale: 1/18 Type: Trail / rock crawler, 4WD Skill level: 1 Length: 234 mm Width / track: 149 mm Height: 107 mm Wheelbase: 168 mm Ground clearance (center): 43 mm Weight: 467 g Driveline: Shaft-driven 4WD, locked spools front and rear Transmission: Single speed, internal gear ratio 74.1:1 Steering servo: 2265, waterproof, metal gear, 75 oz-in (approx. 5.4 kg-cm) Motor: 3S sensorless brushless outrunner, 3350 Kv, 24 x 16 mm, 18 g ESC: 3S brushless, waterproof, 6 V BEC, 34 x 25 x 14 mm, 26 g Battery: 3S LiPo 11.1 V 250 mAh with iD® Battery compartment: 41 x 22 x 14 mm Radio system: TQ™ Compact 2.4 GHz, 2 channels

3.695,-

3.995,-

KJØP

-8%

Traxxas 120074-1 TXC-4M 1/18 Extreme Crawler Pink RTR ...

Art.nr: TRX 120074-1-PINK

Copied

Traxxas TXC-4M 1/18 Extreme Crawler RTR – Rosa – 3S LiPo og USB-lader Traxxas TXC-4M Extreme Crawler er en kompakt og avansert 4WD crawler i skala 1/18, utstyrt med kraftig 3S børsteløst motorsystem, portalaksler, oljefylte GTM Pro-støtdempere og Traxxas TQ 2,4 GHz radiosystem. Bilen leveres ferdig montert og kjøreklar (RTR), inkludert 11,1V 250mAh 3S LiPo-batteri og USB-lader med Traxxas iD. TXC-4M Extreme Crawler er konstruert for krevende terrengkjøring og teknisk klatring. Den kombinerer et lett rørrammekarosseri med et solid monocoque-chassis i komposittmateriale. Portalaksler, triangulert 4-link hjuloppheng og hele 60 graders styrevinkel gir imponerende bakkeklaring, fremkommelighet og manøvrerbarhet. Det børsteløse 3S motorsystemet med outrunner-motor gir presis kontroll ved svært lave hastigheter, samtidig som bilen har god hastighet mellom hindringene. Denne utgaven leveres med rosa karosseriplater og dekor. TXC-4M har vanskelighetsgrad 1 og leveres ferdig montert med batteri og lader. Du trenger kun fire AA-batterier til radiosenderen og en USB-A-strømkilde for å komme i gang. Egenskaper Karosseri: Lett rørrammekonstruksjon med klipsløst feste, utskiftbare karosseriplater, interiør med førerfigur og festepunkter for ekstra LED-belysning. Chassis: Monocoque-chassis støpt i ett stykke av komposittmateriale. Batteri og fartsregulator er plassert lavt på hver sin side for optimal vektfordeling. Motor: Børsteløs 3350Kv outrunner-motor for 3S LiPo, med lasergravert motorhus og ferdig montert motordrev. Fartsregulator (ESC): Vanntett børsteløs 3S ESC med Field Oriented Control (FOC), 6V BEC, beskyttelse mot overspenning fra LiPo-batteriet og totrinns lavspenningsbeskyttelse. Tre kjøreprogrammer: Sport – for vanlig kjøring. Trail – tilpasset terrengkjøring med motorbrems. Crawl – for teknisk klatring, med umiddelbar revers og 100 % holdebremse i bakker. Firehjulstrekk: Permanent kardangdrevet 4WD med låste differensialer og 25 % overdrive på forakselen. Portalaksler: Portalaksler med totrinns utveksling, metalldrev og forseglede kulelager gir økt bakkeklaring og reduserer vridningsreaksjoner i drivverket. Girkasse: Ett gir med metalldrev og kulelager. Drivaksler: Kraftige CV-mellomaksler samt drivaksler og universalledd i stål ut til hjulene. Hjuloppheng: Triangulert 4-link oppheng foran og bak, med bøyde nedre lenkearmer for bedre bakkeklaring og liggende støtdempere. Støtdempere: Oljefylte GTM Pro-støtdempere med anodiserte aluminiumshus og fjærer montert under demperhuset for et realistisk utseende. Styring: Hele 60 graders styrevinkel med vanntett Traxxas 2265 high-torque servo med metalldrev, servohorn i metall med stort utslag og direkte styring uten servosaver. Vektfordeling: Stålvekter i de fremre portalakslene og akseldeksel i stål foran gir lavere tyngdepunkt og bedre stabilitet mot velt. Felger og dekk: 1,3" Method Race Wheels 105 beadlock-replikafelger i tre deler med 7 mm sekskantfeste. Leveres med 1,3 x 2,8" Stone Claw-dekk med skuminnlegg. Radiosystem: Traxxas TQ Compact 2,4 GHz 2-kanals radiosender med avtakbart grepstilbehør i matchende farge. Mottakeren er også kompatibel med TQi-sendere og har doble servo- og LED-kanaler. Holdbarhet: Rustbeskyttede sekskantskruer og forseglede kulelager. Dette følger med Traxxas TXC-4M Extreme Crawler, ferdig montert og kjøreklar (RTR) Klipsløst rørrammekarosseri 3S børsteløst motorsystem med 3350Kv motor og vanntett ESC Traxxas TQ Compact 2,4 GHz 2-kanals radiosender 11,1V 250mAh 3S LiPo-batteri med iD-kontakt USB-hurtiglader med Traxxas iD Vedlikeholdsverktøy Dette trenger du i tillegg 4 stk. AA-batterier til radiosenderen USB-A-strømkilde (minimum 5V / 2A anbefales) Engelsk informasjon: Traxxas 120074-1-PINK – TXC-4M 1/18 Extreme Crawler RTR – Pink 1/18 scale 4WD rock crawler with 3S brushless power, portal axles, oil-filled GTM Pro shocks and TQ™ 2.4 GHz radio. Ready-To-Drive® with 11.1 V 250 mAh 3S LiPo battery and USB charger with iD®. TXC-4M™ Extreme Crawler is a compact rock crawler built around a lightweight tube-frame body and a one-piece molded monocoque chassis. Portal axles, triangulated 4-link suspension and a 60° steering angle give it the clearance and agility for technical climbing lines, while the 3S brushless outrunner system combines precise low-speed control on the rocks with real trail speed between obstacles. This version comes with pink body panels and decals. TXC-4M is rated skill level 1 and is delivered fully assembled with battery and charger. Only four AA batteries for the transmitter and a USB-A power source are needed to get started. Features Clipless tube-frame body with replaceable body panels, interior with driver figure and mounting points for accessory LED light kits One-piece molded composite monocoque chassis – battery and ESC sit low on opposite sides for balanced weight distribution 3S brushless outrunner motor, 3350 Kv, with laser-etched can and pre-installed pinion gear Waterproof 3S brushless ESC with Field Oriented Control (FOC), 6 V BEC, LiPo overvoltage protection and two-stage low-voltage detection Three drive profiles: Sport, Trail with trail-tuned drag brake, and Crawl with instant reverse and 100 % hill-holding brake Full-time shaft-driven 4WD with locked steel spool axles and 25 % overdrive on the front axle Portal axles with 2-gear portals, all-metal gears and sealed ball bearings for more ground clearance and less torque twist Single-speed transmission with all-metal gears and ball bearings Heavy-duty CV center driveshafts, plus steel driveshafts and U-joints out to the wheels Triangulated 4-link suspension front and rear with high-clearance lower links and lay-down shocks Oil-filled GTM Pro shocks with anodized aluminum bodies and springs mounted under the shock body for a realistic look 60° steering angle with waterproof high-torque 2265 metal-gear servo, high-throw metal servo horn and direct steering (no servo saver) Steel front portal weights and steel front axle cover for a low center of gravity and better resistance to rollovers 1.3-inch Method Race Wheels® 105 Beadlock replica wheels (3-piece, 7 mm hex) with 1.3 x 2.8-inch Stone Claw™ tires and foam inserts TQ™ Compact 2.4 GHz 2-channel transmitter with removable color-matched grip adapter. The receiver also works with TQi transmitters and has dual servo and LED channels Rust-resistant coated hex hardware and sealed ball bearings Included TXC-4M Extreme Crawler, fully assembled and Ready-To-Drive®, with clipless tube-frame body 3S brushless power system (3350 Kv motor and waterproof ESC) TQ™ Compact 2.4 GHz 2-channel transmitter 11.1 V 250 mAh 3S LiPo battery with iD® USB quick charger with iD® Maintenance tools Required (not included) 4 x AA alkaline batteries for the transmitter USB-A power source, 2 A and 5 V recommended as a minimum Specifications Scale: 1/18 Type: Trail / rock crawler, 4WD Skill level: 1 Length: 234 mm Width / track: 149 mm Height: 107 mm Wheelbase: 168 mm Ground clearance (center): 43 mm Weight: 467 g Driveline: Shaft-driven 4WD, locked spools front and rear Transmission: Single speed, internal gear ratio 74.1:1 Steering servo: 2265, waterproof, metal gear, 75 oz-in (approx. 5.4 kg-cm) Motor: 3S sensorless brushless outrunner, 3350 Kv, 24 x 16 mm, 18 g ESC: 3S brushless, waterproof, 6 V BEC, 34 x 25 x 14 mm, 26 g Battery: 3S LiPo 11.1 V 250 mAh with iD® Battery compartment: 41 x 22 x 14 mm Radio system: TQ™ Compact 2.4 GHz, 2 channels

3.695,-

3.995,-

KJØP

-8%

Traxxas 120074-1 TXC-4M 1/18 Extreme Crawler Tan RTR - ...

Art.nr: TRX 120074-1-TAN

Copied

Traxxas 120074-1-TAN – TXC-4M 1/18 Extreme Crawler RTR – Tan 1/18 scale 4WD rock crawler with 3S brushless power, portal axles, oil-filled GTM Pro shocks and TQ™ 2.4 GHz radio. Ready-To-Drive® with 11.1 V 250 mAh 3S LiPo battery and USB charger with iD®. TXC-4M™ Extreme Crawler is a compact rock crawler built around a lightweight tube-frame body and a one-piece molded monocoque chassis. Portal axles, triangulated 4-link suspension and a 60° steering angle give it the clearance and agility for technical climbing lines, while the 3S brushless outrunner system combines precise low-speed control on the rocks with real trail speed between obstacles. This version comes with blue body panels and decals. TXC-4M is rated skill level 1 and is delivered fully assembled with battery and charger. Only four AA batteries for the transmitter and a USB-A power source are needed to get started. Features Clipless tube-frame body with replaceable body panels, interior with driver figure and mounting points for accessory LED light kits One-piece molded composite monocoque chassis – battery and ESC sit low on opposite sides for balanced weight distribution 3S brushless outrunner motor, 3350 Kv, with laser-etched can and pre-installed pinion gear Waterproof 3S brushless ESC with Field Oriented Control (FOC), 6 V BEC, LiPo overvoltage protection and two-stage low-voltage detection Three drive profiles: Sport, Trail with trail-tuned drag brake, and Crawl with instant reverse and 100 % hill-holding brake Full-time shaft-driven 4WD with locked steel spool axles and 25 % overdrive on the front axle Portal axles with 2-gear portals, all-metal gears and sealed ball bearings for more ground clearance and less torque twist Single-speed transmission with all-metal gears and ball bearings Heavy-duty CV center driveshafts, plus steel driveshafts and U-joints out to the wheels Triangulated 4-link suspension front and rear with high-clearance lower links and lay-down shocks Oil-filled GTM Pro shocks with anodized aluminum bodies and springs mounted under the shock body for a realistic look 60° steering angle with waterproof high-torque 2265 metal-gear servo, high-throw metal servo horn and direct steering (no servo saver) Steel front portal weights and steel front axle cover for a low center of gravity and better resistance to rollovers 1.3-inch Method Race Wheels® 105 Beadlock replica wheels (3-piece, 7 mm hex) with 1.3 x 2.8-inch Stone Claw™ tires and foam inserts TQ™ Compact 2.4 GHz 2-channel transmitter with removable color-matched grip adapter. The receiver also works with TQi transmitters and has dual servo and LED channels Rust-resistant coated hex hardware and sealed ball bearings Included TXC-4M Extreme Crawler, fully assembled and Ready-To-Drive®, with clipless tube-frame body 3S brushless power system (3350 Kv motor and waterproof ESC) TQ™ Compact 2.4 GHz 2-channel transmitter 11.1 V 250 mAh 3S LiPo battery with iD® USB quick charger with iD® Maintenance tools Required (not included) 4 x AA alkaline batteries for the transmitter USB-A power source, 2 A and 5 V recommended as a minimum Specifications Scale: 1/18 Type: Trail / rock crawler, 4WD Skill level: 1 Length: 234 mm Width / track: 149 mm Height: 107 mm Wheelbase: 168 mm Ground clearance (center): 43 mm Weight: 467 g Driveline: Shaft-driven 4WD, locked spools front and rear Transmission: Single speed, internal gear ratio 74.1:1 Steering servo: 2265, waterproof, metal gear, 75 oz-in (approx. 5.4 kg-cm) Motor: 3S sensorless brushless outrunner, 3350 Kv, 24 x 16 mm, 18 g ESC: 3S brushless, waterproof, 6 V BEC, 34 x 25 x 14 mm, 26 g Battery: 3S LiPo 11.1 V 250 mAh with iD® Battery compartment: 41 x 22 x 14 mm Radio system: TQ™ Compact 2.4 GHz, 2 channels

3.695,-

3.995,-

KJØP

-8%