Hopp til innhold

LaTrax Alias

Populært i denne kategorien

 
Art.nr: 72022
Copied
This is the RPM Landing Gear in Black for the LaTrax Alias Quadcopter.     FEATURES Constructed of engineeering grade nylons  Adds 0.8" (20mm) of extra height  Reduces chance of blade strikes when landing in grass  Also spreads center point of each leg further out by 0.45" (11.5mm)  adding stability to take-offs and landings  Replaces the LaTrax #6649 rubber feet   INCLUDES Four Landing Gear Sections   REQUIREMENTS 0.05" hex key wrench for installation

99,-

KJØP
Art.nr: 72025
Copied
This is the RPM Landing Gear in Blue for the LaTrax Alias Quadcopter.     FEATURES Constructed of engineeering grade nylons  Adds 0.8" (20mm) of extra height  Reduces chance of blade strikes when landing in grass  Also spreads center point of each leg further out by 0.45" (11.5mm)  adding stability to take-offs and landings  Replaces the LaTrax #6649 rubber feet   INCLUDES Four Landing Gear Sections   REQUIREMENTS 0.05" hex key wrench for installation

99,-

KJØP
Art.nr: 72042
Copied
Prop Guards for the LaTrax Alias Quick Notes: – extreme strength and durability – weighs in at a mere 4 grams per guard (including hardware) – sold in pairs (two pairs required per Alias) – 0.05″ hex key wrench is required (not included) for installation. Description: The LaTrax Alias is a fun and capable entry-level quadracopter. However, a simple propeller blade strike can easily take out one of its minuscule motors. RPM Prop Guards alleviate that problem. Our Prop Guards are super lightweight and install in a matter of minutes, adding a tremendous amount of protection to both the motors and propellers of the Alias. Each Prop guard is molded in our trademark blend of engineering grade nylons for unmatched strength and durability. While we made our guards extremely tough, we also made them very light to minimize the effects of added weight on the air frame, weighing in at a mere 4 grams per guard! RPM Prop Guards for the LaTrax Alias are sold in pairs (two pairs will be needed for one Alias) and are molded in either black or blue. RPM Prop Guards will pay for themselves the first time you have one of those “oops” moments! Don’t let a mistake ruin your day of fun. Bolt a set of RPM Prop Guards on and let your confidence soar! Tech Notes: RPM Prop Guards are designed as “bumpers” to help deflect light to medium impacts. They are not designed to save the Alias from full speed or gravity fed crashes. Sold in pairs (two pairs are required for one Alias). Four Prop Guards (2 – front & 2 – rear) must be installed at the same time. Failure to install Prop Guards in all four corners may cause adverse flying characteristics. A 0.05″ hex key wrench is required (not included) for installation    

79,-

KJØP
Art.nr: 72045
Copied
These are the RPM Propeller Guards in Blue for the LaTrax Alias Heli.     FEATURES Plastic construction, blue in color  Weighs only 0.14oz (4g) per guard including hardware   INCLUDES Two Prop Guards with Mounting Hardware and Instructions

79,-

KJØP
Art.nr: TRX 6611
Copied
This is the Red Canopy for the Latrax Alias Quadcopter in Red     FEATURES Two-piece plastic construction   INCLUDES Red Canopy with three Screws   SPECIFICATIONS  Length: 3.4" (87.7mm)  Width: 1.9" (47.5mm)  Height: 0.78" (20mm)

59,-

KJØP
Art.nr: TRX 6612
Copied
This is the Blue Canopy for the Latrax Alias Quadcopter in Blue     FEATURES Two-piece plastic construction   INCLUDES Blue Canopy with three Screws   SPECIFICATIONS  Length: 3.4" (87.7mm)  Width: 1.9" (47.5mm)  Height: 0.78" (20mm)

59,-

KJØP
Art.nr: TRX 6613
Copied
This is the Orange Canopy for the Latrax Alias Quadcopter in Orange     FEATURES Two-piece plastic construction   INCLUDES Orange Canopy with three Screws   SPECIFICATIONS  Length: 3.4" (87.7mm)  Width: 1.9" (47.5mm)  Height: 0.78" (20mm)

59,-

KJØP
Art.nr: TRX 6614
Copied
This is the Green Canopy for the Latrax Alias Quadcopter in Green     FEATURES Two-piece plastic construction   INCLUDES Green Canopy with three Screws   SPECIFICATIONS  Length: 3.4" (87.7mm)  Width: 1.9" (47.5mm)  Height: 0.78" (20mm)

59,-

KJØP
Art.nr: TRX 6623
Copied
This is the Main Frame for the Latrax Alias Quad-Rotor Helicopter.   FEATURES Molded plastic construction, black in color  Replaces damaged main frame   INCLUDES Main Frame for the Latrax Alias Quad-Rotor Heli  Four Screws

119,-

KJØP
Art.nr: TRX 6623A
Copied
This is the Main Frame for the Latrax Alias Quad-Rotor Helicopter. FEATURES Molded plastic construction, white in color Replaces damaged main frame INCLUDES Main Frame for the Latrax Alias Quad-Rotor Heli Four Screws

119,-

KJØP
Art.nr: TRX 6623X
Copied
This is the optional Main Frame in Black Chromefor the Latrax Alias Quad-Rotor Helicopter. FEATURES Molded plastic construction with black chrome finish Holds each motor and all other components in place INCLUDES Main Frame for the Latrax Alias Quad-Rotor Heli Four Screws

175,-

KJØP
Art.nr: TRX 6624
Copied
This is the Lower Main Frame for the Latrax Alias Quadcopter.   FEATURES Plastic construction   INCLUDES Lower Main Frame with screws

49,-

KJØP
Art.nr: TRX 6624A
Copied
Main frame, lower (white) / 1.6x5mm BCS (self-tapping) (4)

49,-

KJØP
Art.nr: TRX 6626
Copied
This is the Rotor Blade Set in Black for the Latrax Alias Quadcopter.   FEATURES Plastic construction  Flexible to withstand crashes   INCLUDES Two Rotor Blades  Two 1.6x5mm Button Head Cap Screws

25,-

KJØP
Art.nr: TRX 6627
Copied
This is the Rotor Blade Set in White for the Latrax Alias Quadcopter.   FEATURES Plastic construction Flexible to withstand crashes   INCLUDES Two Rotor Blades Two 1.6x5mm Button Head Cap Screws

25,-

KJØP
Art.nr: TRX 6628
Copied
This is the Rotor Blade Set in Red for the  Latrax Alias Quadcopter in Red   FEATURES Plastic construction  Flexible to withstand crashes   INCLUDES Two Rotor Blades  Two 1.6x5mm Button Head Cap Screws

25,-

KJØP
Art.nr: TRX 6629
Copied
This is the Rotor Blade Set in Blue for the Latrax Alias Quadcopter in Blue. FEATURES Plastic construction Flexible to withstand crashes INCLUDES Two Rotor Blades Two 1.6x5mm Button Head Cap Screws

25,-

KJØP
Art.nr: TRX 6630
Copied
This is the Rotor Blade Set in Orange for the  Latrax Alias Quadcopter in Orange     FEATURES Plastic construction  Flexible to withstand crashes   INCLUDES Two Rotor Blades  Two 1.6x5mm Button Head Cap Screws

25,-

KJØP
Art.nr: TRX 6631
Copied
This is the Rotor Blade Set in Green for the  Latrax Alias Quadcopter in Green     FEATURES Plastic construction  Flexible to withstand crashes   INCLUDES Two Rotor Blades  Two 1.6x5mm Button Head Cap Screws

25,-

KJØP
Art.nr: TRX 6633
Copied
This is the Main Shaft for the Latrax Alias Quadcopter.   FEATURES Silver metal construction   INCLUDES Main Shaft and Screws

35,-

KJØP
Art.nr: TRX 6633X
Copied
These are the optional Aluminum Main Shafts w/Screws  for the Latrax Alias Quadcopter.     FEATURES Aluminum construction, blue in color   INCLUDES Four Main Shafts with Screws

139,-

KJØP
Art.nr: TRX 6634
Copied
NB: Dette er utgaven uten hull i motordekslet.   This is the Motors for the Latrax Alias Quadcopter.   FEATURES Red connectors on the clockwise motors  Black connectors on the counter-clockwise motors   INCLUDES Two clockwise motors  Two counter-clockwise motors

479,-

KJØP
Art.nr: TRX 6635
Copied
This is the Counterclockwise Rotating Motor for the Latrax Alias Quadcopter.     FEATURES High output replacement for damaged or non-functioning motors  Color of connector indicates rotation of motor and proper connection  to receiver   INCLUDES Counterclockwise Rotating Motor with Pinion Gear and Black Connector  Instruction Sheet   COMMENTS Two counterclockwise rotating motors are required per quadcopter

119,-

KJØP
Art.nr: TRX 6636
Copied
This is the Clockwise Rotating Motor for the Latrax Alias Quadcopter.     FEATURES High output replacement for damaged or non-functioning motors  Color of connector indicates rotation of motor and proper connection  to receiver   INCLUDES Clockwise Rotating Motor with Pinion Gear and Red Connector  Instruction Sheet   COMMENTS Two clockwise rotating motors are required per quadcopter

119,-

KJØP
Art.nr: TRX 6642
Copied
This is the 3x6x2mm Bearings for the Latrax Alias Quadcopter.   FEATURES Metal construction   INCLUDES Eight 3x6x2mm Bearings

139,-

KJØP
Viser 1 til 25 (av 38 produkter)
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png