Energ Futaba 7721044 Y Lead With Position Trim For One ...

Art.nr: 7721044

Copied

Energ Futaba 7721044 Y Lead With Position Trim For One Servo Useful little gadget that will allow electronic trim for one servo. Servo lead length : 15cm Suitable for dual servo elevator operation Servo direction is reversed on lead with adjustable centre point trim

239,-

KJØP

Futaba GY520 Heading Hold Gyro

Art.nr: GY520-007

Copied

Produktinformasjon Futaba GY520, meget liten heading hold gyro fra Futaba. Dette er Futabas nyeste gyro og den er så liten at den kan brukes i alt fra 250 helikopter til store bensinhelikopter. Gyroen kan brukes med de fleste type servoer da den har innstilling for 1520uS og 760uS mode.   Ultra small and light weight gyro contained in one unit-no separate sensor and control unit  Utilizes a high speed advanced PID (Proportional-Integral- Derivative) control algorithm Latest MEMS (Micro-Electro-Mechanical Systems) allows complete control system on one chip  Delivers superior performance with analog servos and excels with digital servos F3C and 3D mode selectable, six programmable parameters  Operates at very high speed; 280Hz in the 1520uS mode and 506Hz in the 760uS mode  Programmable through single button and multi-color LED or through a PC using Futaba CIU-2 USB adapter  Registered AVCS (Angular Velocity Control System) architecture achieves unmatched tail holding ability Size: 0.82 x 0.82 x 0.43" (20.8 x 20.8 x 11mm) Weight: 0.243 oz (6.9g) Voltage Range: 3.8 - 6.0V DC Control System: Advanced PID control Current Draw: 40mA (without servo) Sensor: MEMS vibrating structure gyro Operating Temperature: 14°F - 113°F (-10°C - +45°C) Sensor Rate Range: +/- 800° sec Angular Velocity Range: +- 800 deg/sec

1.895,-

KJØP

Futaba S-U300 Std Servo 4.5kg 0.19s S.BUS2

Art.nr: BULK U300B

Copied

NB! Dette er et helt nytt produkt, men den kommer uten embalasje. Futaba S-U300 Universal Standard Servo This is a new Futaba standard servo with S.BUS(2) function Specs: Plastic Gears Digital / S.BUS2 Input Voltage: 4.8-6V Torque @ 4.8V: 3.5kg/cm Torque @ 6.0V: 4.5kg/cm Speed @ 4.8V: 0.23s/60° Speed @ 6.0V: 0.19s/60° Size: 40.4 x 19.8 x 36.0 mm Weight: 36g

219,-

269,-

KJØP

-19%

Futaba S-U305 Servo Standard 8.9kg/0.20s HV S.BUS2 ...

Art.nr: S-U305

Copied

Futaba S-U305 Std Servo 8.9kg & 0.20s S3305 based design, Digital Servo without S.BUS connection. Specs: LOW Voltage (6V) operation Torque @ 6V: 8.9Kg/cm Speed @ 6V: 0.20sec/60° Size:40.0 x 20.0 x 38.1mm

449,-

479,-

KJØP

-6%

Futaba S-U400 Servo Standard 7.9kg/0.13s HV S.BUS2

Art.nr: FPS-U400

Copied

Futaba S-U400 - Standard-Sized High Voltage Servo with Plastic Gears Features: Plastic Gears High Voltage S.BUS2 Will replace: S3010, S3152 & S3072HV Specs: Rated Voltage: 6-7.4V Operating Voltage: 4.8-8.4V Power @ 6.6V: 7.1kg/cm Speed @ 6.6V: 0.14s/60° Power @ 7.4V: 7.9kg/cm Speed @ 7.4V: 0.13s/60° Size: 40 x 20 x 36.1 mm Weight: 39g Length: 40 mm Height: 38,1 mm Width: 20 mm Weight: 40 g Max Voltage: 7,4 V Speed at 7,2/7,4V: 0,13 sec/60° Torque at 7,2/7,4V: 7,9 kg/cm Features: HV, S.Bus2

459,-

KJØP

Futaba S-U400 Servo Standard 7.9kg/0.13s HV S.BUS2 ...

Art.nr: FPS-U400B

Copied

Futaba S-U400 Standard Servo HV S.BUS2 - Bulk Pack Features: Plastic Gears High Voltage S.BUS2 Will replace: S3010, S3152 & S3072HV Specs: Rated Voltage: 6-7.4V Operating Voltage: 4.8-8.4V Power @ 6.6V: 7.1kg/cm Speed @ 6.6V: 0.14s/60° Power @ 7.4V: 7.9kg/cm Speed @ 7.4V: 0.13s/60° Size: 40 x 20 x 36.1 mm Weight: 39g

399,-

429,-

KJØP

-7%

Futaba S9470SV S.Bus2 High-Voltage 1/10 Car Servo

Art.nr: FPS9470SV

Copied

This is the Futaba S9470SV HV SB2 Servo for 10 scale Car Usage. FEATURES Coreless motor Water protected Metal gears with two ball bearings Programmable and compatible with S.Bus and S.Bus2 systems High voltage handles extra speed and power provided by 2S LiPobatteries INCLUDES S9470SV HV SB2 SX Servo, 1.8" (44mm) long 3-Point Horn, two rubber Grommets, four Eyelets, 3x8mm Servo Horn Screw and Instructions SPECIFICATIONS                           6.0V                           7.4V Torque: 153oz-in 11.4kg-cm        191oz-in 13.8kg-cm Speed:           0.11 sec/60°               0.09 sec/60° Dimensions: 1-9/16 x 13/16 x 1-7/16" (40 x 20 x 37mm) Weight: 1.9oz (54g) SBus Programmable Defaults Dead Band Degree: 0.25 Damper Factor: 112 Stretcher Gain: 1 Boost: 8 Neutral Offset Degree: 0 Travel Adjust Percentage: 100% Reverse (Normal/Reverse): Nor Stop Mode (Free/Hold): Free Buzzer (On/Off): Off Smoother (On/Off): Off Boost (On/Off): Off

1.099,-

KJØP

Futaba WSC-1 Wireless Simulator Control Dongle S-FHSS ...

Art.nr: 05102690-3

Copied

Futaba WSC-1 - USB Type S-FHSS Wireless Simulator Control Dongle The WSC-1 allows for direct wireless communication with simulators and transmitters using the S-FHSS protocol. Compatible with the most popular simulators on Windows 8.1/10 Currently all available transmitter from Futaba can work with WSC-1 except 3PRKA & T6L (As of May 2021).   Wireless simulator dongle For flight simulator and/or driving simulator software WSC-1 is like a Receiver You can use S-FHSS Tx for joystick control with WSC-1 Specs: Interface: USB 2.0 Applicable OS: Windows® 10/8.1 USB Connector: USB Series A Connector Dimension: 18.2 x 56.5 x 9.0mm Weight: 7.5 g Operating Voltage: 5.0 V ± 0.2 V (USB Bus Power) Max Operating Range: About 10m without obstacles (Optimum condition) Operating Enviroment: Temperature: -10 – 45° C

699,-

KJØP

Tekin T-440 Digital Hi-Torque Programmable Servo (High ...

Art.nr: TT1507

Copied

Tekin T-440 Digital Hi-Torque Programmable Servo (High Voltage) Hit the trails hard with the Tekin T-440 Crawler Servo. Rocks, Mud, Dirt or Snow. The Element Proof Design means you can tackle any terrain. Full Metal Gear set, All Aluminum Housing, Digital Position Encoding and loads of Torque, this servo keeps you out of a bind. Fine-tune your setup with an extensive set of adjustments via Tekin’s HotWire PC Interface.   The Difference is in the Design Tekin servos are crafted from the highest quality materials available. CNC Precision Cut gears provide an extremely smooth and efficient drive train. 6061-T6 machined aluminum 3-piece o-ring housings provide strength and protection from the elements while the finish quality and design are second to none. Sleek chamfered edges and bold lines combined with a matte anodized finish are sure to accent any build. Included with the T-440 Servo is a machined aluminum 20mm Crowbar 25T dual clamping servo arm. Advanced Technology: Digital Magnetic Position Encoder (DPE): Our servos use Digital Magnetic Position Encoding (DPE) rather than a standard potentiometer, which gives Tekin servos industry leading accuracy, linearity and consistency. Accuracy: Precise linear movement through the entire motion range with less than .2 degrees of deviation from start point to end point make Tekin the superior performance product.  Low deviation DPE technology translates to pinpoint accuracy not found in other potentiometer servos, which tend to wander and center poorly and get worse as they age. Tekin is built to last at peak performance. Linearity: Potentiometer servos can be up to seven degrees non-linear from end point to end point, creating a disconnected feel from your transmitter. Tekin servos eliminate this disconnect, giving you a linear feel and more precise control over your servo movement and position. Consistency: Performance is important but we are all about consistent performance. Potentiometer performance drifts due to many variables; heat, age, component quality, etc. DPE is a rock-solid, repeatable and consistent technology bringing an unmatched consistency to Tekin servos. Tired of constantly trimming your servo and having response feel different during times of longer usage? Tekin servos are the answer. Efficiency: Accuracy drives efficiency. A servo that has to work less to center or stop without overshooting position is using less energy. This means less heat build-up, less component fatigue and longer life. Adaptability: Tekin Servos come with a series of unique features; DPE technology lets you set the center point anywhere, and servo travel limits can be set without reducing the End Point Adjustments (EPA’s) on your transmitter.  Most servos are limited to 90° travel in each direction with a physical stop point; DPE means that Tekin servos can be programmed to travel beyond 360°-- up to 5 full rotations in each direction! Element Proof: Dependable, no matter the terrain. Element Proof Tekin products are designed to handle water, mud & snow within reasonable restrictions. While we are not afraid to take on the elements, submerging is not recommended. Features: Digital Magnetic Position Encoder (DPE) Specifically Designed for 1/8 and 1/10 Scale Applications Included Aluminum Vector Servo Arm ​Full Aluminum Servo Housing ​Element Proof Design* ​Precision Cut Full Metal Gears ​ABEC5 Ball Bearings ​High Voltage Capable ​High Torque Coreless Motor ​25T Output Spline ​Programmable via HotWire PC Interface ​Overload Protection Technology ​Thermal Protection Circuitry ​Low Voltage Alarm** ​Quiet, Efficient, Cool Operation ​HDAC: High Density Copper PCB's *Tekin Element Proof products are designed to withstand water, snow and mud. Not intended for operation while submerged in liquid. **requires HotWire sold separately HotWire Programmable Features: Feel - Mild to Aggressive ​Speed Limit ​Torque (0-100%) ​Torque Delay ​Direction - Normal / Reverse ​Center Point ​Travel ​Soft Starting Speed & Torque ​Max Temp Alarm ​Low Voltage Alarm ​Over Voltage Alarm ​Bind Relief ​Fail Safe Speed and Position ​Set Custom Servo Name Specifications: Size Category: Standard Type: Digital Application: Rock Crawling and Rock Racing Torque: 502 oz-in (36.2kg-cm) @ 8.4V; 460 oz-in (33.1kg-cm) @ 7.4V; 421 oz-in (30.3kg-cm) @ 6.0V Speed: 0.11sec/60 deg @ 8.4V; 0.13sec/60 deg @ 7.4V; 0.15sec/60 deg @ 6.0V Length: 1.57 in (40mm) Width: 0.79 in (20mm) Height: 1.57 in (40mm) Weight: 2.57 oz (73g) Bushing Or Bearing: Bearing Motor Type: Coreless Gear Type: Metal Voltage: 4.8V to 8.4V

2.195,-

2.495,-

KJØP

-12%