Hopp til innhold

Servokabler

Populært i denne kategorien

 
Art.nr: 57350S
Copied
This is a Hitec 24" Y-Harness Servo Extension. FEATURES One male and two female universal connectors INCLUDES One Hitec 24" Y-Harness Servo Extension REQUIREMENTS Connection to receiver and servos SPECIFICATIONS Length: 24" (610mm)

85,-

KJØP
Art.nr: BR-SF10
Copied
Lengde: 10cm Ledning: Rett Type kontakter: Universal, f.eks Futaba, Hitec, JR, Graupner m.m.

25,-

KJØP
Art.nr: BR-SF10T
Copied
Lengde: 30cm Ledning: Tvunnet Type kontakter: Universal, f.eks Futaba, Hitec, JR, Graupner m.m.

28,-

KJØP
Art.nr: BR-YK10
Copied
Lengde: 10cm (3x5cm) Ledning: Rett Type kontakter: Universal, f.eks Futaba, Hitec, JR, Graupner m.m.

35,-

KJØP
Art.nr: BR-SF20
Copied
Lengde: 20cm Ledning: Rett Type kontakter: Universal, f.eks Futaba, Hitec, JR, Graupner m.m.

29,-

KJØP
Art.nr: BR-SF30
Copied
Lengde: 30cm Ledning: Rett Type kontakter: Universal, f.eks Futaba, Hitec, JR, Graupner m.m.

29,-

KJØP
Art.nr: BR-SF30T
Copied
Lengde: 30cm Ledning: Tvunnet Type kontakter: Universal, f.eks Futaba, Hitec, JR, Graupner m.m.

35,-

KJØP
Art.nr: BR-SF5
Copied
Lengde: 5cm Ledning: Rett Type kontakter: Universal, f.eks Futaba, Hitec, JR, Graupner m.m.

24,-

KJØP
Art.nr: BR-SF20L
Copied
20cm servoforlenger :: BR-SF20L Universal thin Spesifikasjoner Lengde 20cm Kabeltype Tynn / 26AWG / Rett Passer kontakter Universell, t.ex. Futaba, Hitec, JR, Graupner etc.

39,-

KJØP
Art.nr: BR-YK10T
Copied
Lengde: 10cm (3x5cm) Ledning: Tvunnet Type kontakter: Universal, f.eks Futaba, Hitec, JR, Graupner m.m.

39,-

KJØP
Art.nr: B9522
Copied
DynoMAX B9522 - Futaba Servo Extension Wire with Connector Locks 300mm This is an flat 300mm long extension wire for Futaba that is equipped with connector locks. Specs: Length: 300mm Wires: 22AWG Connectors: Futaba with locks

35,-

KJØP
Art.nr: B9525
Copied
DynoMAX B9525 - Universal/JR Servo Extension Wire with Locks This is an flat 300mm long extension wire with universal/JR connectors that is equipped with connector locks. Specs: Length: 300mm Wires: 22AWG Connectors: Universal/JR with locks

29,-

KJØP
Art.nr: FP1418B
Copied
Extension cord 100mm bulk

49,-

KJØP
Art.nr: 54606
Copied
This is a Heavy Duty 36" Servo Extension with                     Hitec-S, JR, Airtronics-Z Connectors. This extension goes between the receiver and the servo to make the wire longer.              On one end of the wire is a male connector and on the                  other end of the wire is a female connector.   FEATURES: Gold-plated teminals improve conductivity and prevent oxidation for             longer lifespan.           Heavier, 20-gauge wire handles higher current loads.   INCLUDES: One 36" Long Servo Extension w/Hitec-S, JR, Airtronics-Z Style             Connectors   SPECS:    Wire Gauge: 20           Wire Color Codes-             JR-                             Hitec-              Airtronics Z-             Brown:  ground      Black:  ground      Black: ground             Red:    positive    Red:    positive    Red:   positive             Orange: signal      Yellow: signal      Blue:  signal

65,-

KJØP
Art.nr: 54611
Copied
This is a Heavy Duty 24" Twisted Wire Servo Extension with Hitec-S, JR, Airtronics-Z Connectors. This extension goes between the receiver and the servo to make the wire longer. On one end of the wire is a male connector and on the other end of the wire is a female connector. FEATURES Gold-plated teminals improve conductivity and prevent oxidation for longer lifespan Heavier, 20-gauge wire handles higher current loads Twisted wire design cuts down on electro-magnetic noise (EMI) which can cause radio interference INCLUDES One 24" Long Servo Extension w/Hitec-S, JR, Airtronics-Z Style Connectors SPECIFICATIONS Wire Gauge: 20 Wire Color Codes- JR- Hitec- Airtronics Z- Brown: ground Black: ground Black: ground Red: positive Red: positive Red: positive Orange: signal Yellow: signal Blue: signal

89,-

KJØP
Art.nr: 54612S
Copied
This is a Heavy Duty 36" Twisted Wire Servo Extension with Hitec-S, JR, Airtronics-Z Connectors. This extension goes between the receiver and the servo to make the wire longer. On one end of the wire is a male connector and on the other end of the wire is a female connector. FEATURES Gold-plated teminals improve conductivity and prevent oxidation for longer lifespan Heavier, 20-gauge wire handles higher current loads Twisted wire design cuts down on electro-magnetic noise (EMI) which can cause radio interference INCLUDES One 36" Long Servo Extension w/Hitec-S, JR, Airtronics-Z Style Connectors SPECIFICATIONS Wire Gauge: 20 Wire Color Codes- JR- Hitec- Airtronics Z- Brown: ground Black: ground Black: ground Red: positive Red: positive Red: positive Orange: signal Yellow: signal Blue: signal

79,-

KJØP
Art.nr: 54701
Copied
This is a 6" Long, Heavy Duty Y-Harness with Hitec S, JR, Airtronics Z Connectors. Features     Hitec 54701S Y-Harness 6"     Gold-plated teminals improve conductivity and prevent oxidation for     longer lifespan.     Heavier, 20-gauge wire handles higher current loads. Specifications     Fork in "Y" occurs 2" from the receiver connector     Overall Length: 6"     Connectors: one male and two female Contents     One 6" Long, Heavy Duty Y-Harness with Hitec S, JR, Airtronics Z Connectors

89,-

109,-

KJØP
-18%
Art.nr: 54702S
Copied
This is a 24" Long, Heavy Duty Y-Harness with Hitec S, JR, Airtronics Z Connectors. FEATURES Gold-plated terminals improve conductivity and prevent oxidation for longer lifespan. Heavier, 20-gauge wire handles higher current loads. INCLUDES One Heavy Duty Y-Harness with Hitec, JR, Airtronics Z Connectors SPECIFICATIONS Fork in "Y" occurs 10-3/4" from the receiver connector Overall Length: 24" Connectors: one male and two female

89,-

KJØP
Art.nr: 54703S
Copied
This is a Heavy Duty 6" Twisted Wire Y-Harness with Hitec-S, JR, Airtronics-Z Connectors. Features     Hitec 54703S 6" Heavy Gauge Twisted Wire Y Harness w/Pins     Gold-plated teminals improve conductivity and prevent oxidation for longer lifespan     Heavier, 20-gauge wire handles higher current loads     Twisted wire design cuts down on electro-magnetic noise (EMI) which can cause radio interference Specifications     Wire Gauge: 20     Wire Color Codes-     JR-                    Hitec-              Airtronics Z-     Brown: ground   Black: ground    Black: ground     Red: positive      Red: positive     Red: positive       Orange: signal    Yellow: signal    Blue: signal   Package Contents     One 6" Long Y-harness w/Hitec-S, JR, Airtronics-Z Style Connectors Requirements     N/A  

129,-

KJØP
Art.nr: 54704S
Copied
This is the Hitec 24" Heavy Twisted Wire Y Extension (Harness) with Universal Connectors (JR, Hitec, Airtronics Z). FEATURES Heavier wire handles higher current loads with ease Has one male connector that plugs into the receiver and two female connectors that normally "Y" out toward two aileron servos INCLUDES One 24" Heavy Twisted Wire Y-Harness w/Universal Connectors (JR, Hitec Airtronics Z) SPECIFICATIONS Overall Length: 24" (610mm) not including connectors Length up to the Y: 12.5" (317mm) Length of each extension after the Y: 11.25" (286mm) Wire Color Codes- JR- Hitec- Airtronics Z- Brown: negative Black: negative Black: negative Red: positive Red: positive Red: positive Orange: signal Yellow: signal Blue: signal

99,-

KJØP
Art.nr: 57344
Copied
Hitec 57344 Servo Extension 6"  This is a 6" Servo Extension by Hitec. FEATURES:            This allows you to extend the distance between your receiver and servo. INCLUDES: (1) Extension REQUIRES: Installation SPECS:    Length: 6" (152mm) COMMENTS:                            Wire color code: Hitec-                            Black:  negative                            Red:    positive                            Yellow: signal

49,-

59,-

KJØP
-17%
Art.nr: 57345J
Copied
 This is a 12" Servo Extension by Hitec. FEATURES: This allows you to extend the distance between your receiver and servo. INCLUDES: (1) Extension Futaba Style REQUIRES: Plugging into receiver and servo SPECS: Length: 12" (304mm) COMMENTS: Wire color code: Hitec- Black: negative Red: positive Yellow: signal

49,-

KJØP
Art.nr: 57345S
Copied
   This is a 12" Servo Extension by Hitec. FEATURES: This allows you to extend the distance between your receiver and servo. INCLUDES: (1) Extension REQUIRES: Plugging into receiver and servo SPECS: Length: 12" (304mm) COMMENTS: Wire color code: Hitec- Black: negative Red: positive Yellow: signal

49,-

59,-

KJØP
-17%
Art.nr: 57346
Copied
This is a 24" Servo Extension by Hitec. FEATURES: This allows you to extend the distance between your             receiver and servo.   INCLUDES: (1) Extension   REQUIRES: Plugging between receiver and servo   SPECS:    Length: 24" (610mm)   COMMENTS: Wire color code: Hitec-                            Black:  negative                            Red:    positive                            Yellow: signal

59,-

KJØP
Art.nr: 57347s
Copied
  This is a 36" Servo Extension from Hitec. FEATURES: 36" long with universal connectors   INCLUDES: One Servo Extension   SPECS:    Length: 36" (91.4cm)

59,-

KJØP
Viser 1 til 25 (av 28 produkter)
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png