Hopp til innhold

Radioutstyr

Populært i denne kategorien

Art.nr: 57350S
Copied
This is a Hitec 24" Y-Harness Servo Extension. FEATURES One male and two female universal connectors INCLUDES One Hitec 24" Y-Harness Servo Extension REQUIREMENTS Connection to receiver and servos SPECIFICATIONS Length: 24" (610mm)

85,-

KJØP
Art.nr: UDI005-33
Copied
UDI005-33 Receiver

165,-

KJØP
Art.nr: UDI005-39
Copied
UDI005-TX Transmitter

295,-

KJØP
Art.nr: 2000005
Copied
The CR4T ultimate is a professional 2.4GHz "SMART" radio with a large "Brilliant Touch Screen" display. The navigation works through "ICONS" which everybody knows from smartphones and tablet PCs. Including a 4-channel receiver, which is expandable up to 18 ports through separate serial bus receiver modules (2020004). Including several telemetry modules for temperature, voltage and speed (optical).   !!! NEW FEATURES !!! ● Faster transmission speed – 8MS ! ● RACE MODE (cut-off all telemetry functions for race tracks) ● LiPo suitable mini receiver   Technical Specification Radio: ● 2.4GHz A.F.H.D.S.2 ● 4-channel ● Brilliant touch screen display ● 20 model memory ● EXP; EPA; ABS; Dual rate; Servo reverse ● Racetimer ● Boat modus ● „Help" function ● Menu in English/German/French ● Battery case for 4pcs. AA mignon cells ● Foam rubber steering wheel ● Steering wheel position changeable (left / right side) ● and many more...!!!   Technical Specification Receiver: ● 2.4GHz A.F.H.D.S.2 ● 4-channel receiver R4WPmini ● Water-resistant ● 4.8V – 7.4V ● Failsave function (programmable) ● Measure: 35x21x12mm   Scope of Delivery: ● CR4T ultimate radio ● R4WPmini receiver ● Voltage module ● Optical speed module ● Temparature module ● Manual ● Binding cable ● Areal tube ● 4pcs. AA rechargeable batteries

2.495,-

2.795,-

Ikke på lager
-11%
Art.nr: 200009
Copied
Fra produsenten: 2.4GHz 6-Channel Radio «CR6S» including Receiver with Mixed Mode for RC Cars, Boats and Tanks FEATURES: 2.4GHz FHSS technology, 6 channels frequency-hopping spread spectrum, highly resistant to anti-jamming. Receiver response time is 3ms, ensuring a fast response and better control. Smooth and highly sensitive to control inputs and stable at distances up to 200m Compatible with a variety of vehicles; suitalbe for RC cars, RC boats and RC tanks…etc. With brake and fail safe «out of control» protection function. Each 3 channels can be set respectively, supporting mixed control for 1 and 2 channels. Voltage range of transmitter: 4.8V – 12V (support 1s-3s battery), automatic identification of voltage, low voltage warning on 7.4V/4.8V Voltage range of receiver: 3.3V-10V, working current 30mA, supports high voltage servo. Unique throttle speed limit adjustment function, allows beginners to practive at a safe speed. Channel 4 with winch function ( I – 0 – II ) Channel 5 and 6 press for lock and press for release, servo function specially for Crawler accessories. Foam wheel for a good grip SPECIFICATION: Channel: 6CH Radio size (L/W/H): 160x100x200mm Water-proof receiver Receiver size (L/W/H): 35x20x13mm Radio operating current: 80-120mA Receiver operating current: 30mA Radio voltage range: 4.8-12V (LiPo suitable) Receiver voltage range: 3.3-10V Stable distance control up to 200m SCOPE OF DELIVERY: CR6S 6-Channel Radio R6WP 6-Channel Receiver Manual (DE/EN/FR)

795,-

895,-

KJØP
-11%
Art.nr: 2000010
Copied
CR4S-V2 er en 4-kanals radiosender som bruker den nyeste frekvenshoppingteknologien fra ABSIMA. Mottaker er inkludert. Viktig: Dette er V2-versjon med nye mottakere (2020018 & 2020019). Lett og kompakt design, samt komfortabel og ergonomisk form. I tillegg har fjernkontrollen en «nybegynnermodus» og er derfor også egnet for nybegynner med mindre erfaring og også barn. Den medfølgende mottakeren passer i nesten enhver mottakerboks.      Funksjoner Beskrivelse av de ulike kanalene: CH1: Styring (servo) CH2: Gass/Throttle CH3: Vippebryter CH4: Trykkbryter   Revers(REV): Denne funksjonen kan brukes til å endre rotasjonsretningen til styringsservoen/motoren. Trim (TRIM): Man kan justere så man kjører rett og nøytralposisjon for gassen. Dual Rate-funksjon (D/R): Styrevinkelen og også motorens rotasjonskraft kan økes eller reduseres ved å betjene disse dreieknappene. Failsafe-funksjon: Denne funksjonen bestemmer hva mottakeren skal foreta seg hvis signalet til senderen går tapt (f.eks. nødbremsing). Nybegynnermodus: I denne modusen reduseres motorkraften 50%. Spesifikasjoner Radiosender CR4S-V2: Kanaler: 4 Protokoll: 2.4GHz Rekkevidde: >150m Batteri (ikke inkludert): 4*AAA 1.5 – 6V DC Advarsel ved for lav spenning: <4.2V (kun NiMH) Bruk av TX LiPO batteri mulig: Ja (kun batteri med innebygget cut-off ved for lav spenning) Antennetype: Singel Driftstemperatur: -10°C – +60°C Størrelse (L/B/H): 150*100*210 mm Vekt: ca. 130 g   R4WP-V2 Micro Mottaker (2020019): Spesifikasjoner: Kanaler: 4 Protokoll: 2.4GHz Rekkevidde: >150m Antennetype: Ekstern Vanntett: Ja Drivspenning: 3.5-8.4V Failsafe: Ja (i kombinasjon med radio) Driftstemperatur: -10°C – +60°C Vekt: 5g Størrelse: 30.2*18.0*13.0mm Settet inneholder: 4-kanals radiosender CR4S-V2 4-kanals mottaker Antennerør Bruksanvisning (DE/ENG/FR) Kompatibelt tilbehør (ikke inkludert): 2020018 – Mottaker R4WP-V2 med innebygget antenne       4140016 – TX LiPo Battery 2S/7.4V 1200mAh med innebygget LiPO Protect (cut-off funksjon som beskytter batteriet ved for lav spenning)

749,-

799,-

KJØP
-6%
Art.nr: 2000011
Copied
Den nye Absima CR7P som bruker den nye 2.4GHz ANT protokollen. Denne radioen har det meste av muligheter, og er ideel for Crawlere, on-road, off-road, drifte biler og båter. Det store displayet på 3,5 x 7,0 cm, gjør det veldig enkelt å manøvrere menyen. Her står du nok ikke fast da det gjelder muligheter.   This remote control system uses the new 2.4 GHz ANT protocol – “enhanced automatic frequency hopping digital system”, consisting of a CR7P transmitter and a R7FS receiver. There are 7 channels available. The system is ideally suited for crawlers, on-road cars, off-road cars, drift cars and boats. The large 3,5 x 7,0cm DOT Matrix Display shows all selected parameters clearly. FEATURES Description of the channels: CH1: Steering wheel CH2: Throttle (Trigger) CH3: SW1 knob CH4: SW2 knob CH5: SW3 3-way switch CH6: VR1 rotary switch CH7: VR2 3-way toggle switch 5-way navigation button 5-way trim switch New “ANT” 2.4GHz protocol Various MIX functions (program mixer, dual motor mixer, 4-wheel steering mixer) Supports 4* AA batteries or 2S LiPo battery as power supply 2-way data transmission 20 model memories Beginner Mode Timer / lap counter Standard functions like REV / EPA / SUB TR / D/R and CURVE settings Internal antenna Calibration program Lightweight and compact design weighing only 305g (without batteries) Up to 300m range SPECIFICATIONS Remote control CR7P: Frequency: 2.4GHz Channels: 7 Model type: cars, boats RF frequency 2.4GHz; ISM: 2.4G protocol ANT Maximum power: <20 dBm (EIRP) (EU) Receive sensitivity: ≤-99dBm Channel resolution: 1024 Undervoltage warning: YES Date output: PWM/PPM/i-BUS/S.BUS Input power: 4-9 V/DC Battery: 1.5 AA * 4 / 2S Lipo (JST) Data output type: -C- interface Charging interface: NO Antenna type: Built-in single coaxial cable antenna Display Mode 128*64 LCD (DOT matrix screen, backlit) Distance: ≥300 m (ground) Working current: approx. 110mA/6V Temperature range: -10?~+60? Humidity range: 20-90% Size: 136.4 x 111.8 x 197.5mm Weight: 305g Receiver R7FS (2020017): Model: R7FS Frequency: 2.4GHz Channels: 7 Waterproof: NO RF Frequency: 2.4GHz ISM RF Standard: ANT Input power: 3.5-9 V/DC Weight: 8g Size: 35*23,3*13,3mm INCLUDED IN THE SET 1* CR7P remote controller 1* R7FS receiver 1* Instruction manual (DE/ENG/FR)

1.995,-

2.095,-

KJØP
-5%
Art.nr: 2000013
Copied
This 10-channel remote control set consists of a transmitter and a waterproof receiver and uses the latest 2.4 GHz frequency communication technology. The system is ideal for crawlers, on-road cars, off-road cars, drift cars and boats.   Aluminum steering wheel with foam rubber cover 4,0 x 5,3cm color display Super easy operation with "Push&Spin" button 10 model memory  Simple menu can be operated using just 2 buttons (push&spin wheel and power button) Supports tank mix mode and user-defined mix functions Independent setting of the servo direction and limitation of all channels Steering and acceleration curve can be adjusted Gyro and winch mode (separate accessory) Operating voltage display on the main screen 10 model memory Range of up to 350 meters Transmitter supports 4* AA batteries or 2S LiPo battery (Art. 4140015) as power supply Timer Various alarm and security functions LED lighting Suitable for on-road cars, off-road cars, crawler, tanks, boats     Description of the channels: CH1: Steering CH2: Trigger (acceleration/brake) CH3/CH4: Button CH5/CH6: Rotary control CH7: 3-way switch CH8/CH9/CH10: Button     RADIO: Channels: 10 Frequene: 2.4GHz FHSS Battery voltage: 4.8V-11.1V (4* AA Mignon / 2/3S LiPo) Battery size: 50*50*14mm Temperature range: -10°~+60° Size(H/B/T): 200x85x150 mm Weight(without batteries): 285g   RECEIVER: Item number: 2020025 Model: R10WP Frequency: 2.4GHz Channels: 10 Waterproof: Yes HF-Frequency: 2.4 GHz FHSS Input power: 4.8–10 V/DC Weight: 10g Dimensions: 40*27*13mm   Whats in the box:   1* CR10P radio 1* R10WP receiver 1* Quick start guide (DE/ENG/FR)

1.695,-

1.795,-

KJØP
-6%
Art.nr: 2020002
Copied
R3WP Receiver: 2,4Ghz A.F.H.D.S.system Water resistant 3 channels Failsafe function Measurements: 35 x 21 x 12mm Weight: 11g Voltage: 4,8V - 6,6V

419,-

KJØP
Art.nr: 2020006
Copied
Magnetic speed telemetry module

230,-

KJØP
Art.nr: 2020012
Copied
  4-CHANNEL RECEIVER R4WP MINI ULTIMATE 2.4 GHZ CR4T ULTIMATE Denne mottaker passer til Absima CR4T – Ultimate ● 2.4GHz A.F.H.D.S.2 ● 4-channel receiver R4WPmini ● Water-resistant ● 4.8V – 7.4V ● Failsave function (programmable) ● Measure: 35x21x12mm

490,-

KJØP
Art.nr: 2000002
Copied
CPU Radios are every rc car or boat drivers dream! But what you dream of? It's as much fuctions as possible, big display, stable transmition, nice design but for also for the small pocket. Here you go! Absima's CR3P! A.F.H.D.S. 2,4Ghz system 3 channel radio 3 channel receiver, water resitant, incl. failsafe 10 model memories servo reverse dual rate EPA EXP ABS the big (39 x 72 mm), blue illuminated L.E.D. display shows all funtions and adjustments. It also keeps you informed about the radio's voltage. We putted the steeringwheel in an outstanding position to keep handling as comfortable as  possible. Additionaly the trimmlevers position allows to set trimm, without leaving the model unattended the R3WP Receiver! water resistant 3 channels 35 x 21 x 12mm 11g only failsafe function included    

1.199,-

KJØP
Art.nr: 2020008
Copied
Temperature telemetry module

230,-

KJØP
Art.nr: 7054W
Copied
7054W Receiver: 2,4Ghz system Water resistant 3 kanaler Failsafe function Størrelse: 35 x 21 x 12mm Vekt: 11g Spenning: 4,8V - 6,6V

329,-

KJØP
Art.nr: 500100
Copied
Carson 500100 Reflex Wheel Start 2.4 GHZ Radio Blue En radio som passer spesielt god for barn, med små hender. Denne er laget for at det skal være lettere for de minste å kjøre RC bil. Perfekt da også max hastighet kan begrenses med denne radio. Det er 3 kanaler, og har EPA, DUAL RATE på styring og gass (Throttle), Trim og servo reversering. Den er beregnet på 3 stk AA batterier, og mottaker tåler fra 4.8V til 8.4V. MERKE CARSON TIL Bil

599,-

649,-

KJØP
-8%
Art.nr: 500102
Copied
Reflex Wheel Start 2.4G Radio black The radio remote control from Carson offers everything that especially beginners and small RC fans want - easy handling, good grip and low weight. In addition, the control unit offers many important functions that are also included in the larger models. For example, it has trim, servo reverse, dual rate for both channels, a failsafe function, an LED battery indicator and a functional third channel via button. TECHNICAL DATA Operating Voltage of transmitter 4,8 up to 6 V two continuously controllable fully proportional channels servo reverse for both channels (reversal of the running direction) trimming function for accelerator and steering Dual Rate for both channels (path limitation of the servos) powering of receiver (without BEC) 11 V possible Integrated Fail-Safe plug system for Futaba and Graupner-J/R battery status indicator by LED. 3 channel receiver Integrated Failsafe TAMIYA KIT comatible

629,-

679,-

KJØP
-7%
Art.nr: 500109
Copied
Reflex Wheel Start 2.4G Radio gray The radio remote control from Carson offers everything that especially beginners and small RC fans want - easy handling, good grip and low weight. In addition, the control unit offers many important functions that are also included in the larger models. For example, it has trim, servo reverse, dual rate for both channels, a failsafe function, an LED battery indicator and a functional third channel via button. TECHNICAL DATA Operating Voltage of transmitter 4,8 up to 6 V two continuously controllable fully proportional channels servo reverse for both channels (reversal of the running direction) trimming function for accelerator and steering Dual Rate for both channels (path limitation of the servos) powering of receiver (without BEC) 11 V possible Integrated Fail-Safe plug system for Futaba and Graupner-J/R battery status indicator by LED. 3 channel receiver Integrated Failsafe TAMIYA KIT comatible

629,-

679,-

KJØP
-7%
Art.nr: 500501537
Copied
I forbindelse med Refleks Stick V2, er fjernkontrollen kompatibelt med MFC, DMD av Tamiya og LR – 634 CU av Carson. 6-kanals mottaker som passer til Refleks Stick V2 – 2.4 GHz Batterispenning 4,8-6 V Kontakter J/R.

749,-

KJØP
Art.nr: 501540
Copied
Carson Reflex Stick Multi Pro 2,4 GHz 14-kanals mottaker er den ideelle mottaker for din RC  modell når det gjelder ekstra funksjoner som lys, høyttalere og å styre mange flere funksjoner. Den kompakte størrelsen gjør den til den perfekte følgesvenn i din bil eller båt modell. Uni-kontakten systemet er egnet for Futaba og Graupner-J / R. I forbindelse med CARSON Reflex Stick MultiPro fjernkontroll, er den kompatibel med TAMIYA MFC og DMD enheter i systemet. Dette er en tilleggsmottaker eller reservemottaker til Carson Reflex Stick Multi Pro 14 radio.

759,-

799,-

KJØP
-5%
Art.nr: 501544
Copied
14 kanals mottaker til Carson Reflex 14 CH LCD

849,-

899,-

KJØP
-6%
Art.nr: 010-0153-00
Copied
This is the Castle Creations CC-BEC 2.0 Battery Eliminator Circuit Switching Waterproof Voltage Regulator. FEATURES For crawler, marine, sea plane, UAS and industrial applications Wide input voltage range of 2S-14S (6V-58.8V) 15 amp 5.25V @ 12S peak output current 4.75-12V adjustable output voltage Waterproof under normal usage INCLUDES CC-BEC 2.0 BEC Waterproof Voltage Regulator SPECIFICATIONS Length: 1.37" (35mm) Width: 0.69" (18mm) Height: 0.75" (19mm) Weight: 1.0oz (28g) w/full length wires, wires may be shortened to save weight Peak Current: 15A depending on input and output voltage Continuous Output Current: 5-6V Output: 10A 6.25-8.5V Output: 9A 8.75-10V Output: 8A 10.25-12.0V Output: 7A Adjustable Output Voltage: 4.75-12V (adjustable via Castle Link-sold separately) Default Setting: 5.25V Max Voltage:Surface, 12S (50.2V) Air (no brake): 14S (58.8V) Air (w/brake): 12S (50.2V)

849,-

899,-

KJØP
-6%
Art.nr: 010-0154-00
Copied
CC BEC 2.0 VOLTAGE REGULATOR From the trusted manufacturer of BECs comes the next generation of voltage regulators. Designed and assembled in the USA1, Castle Creations’ CC BEC 2.0 gives users higher voltage ranges in two unique packages. For pilots there is a smaller, lightweight (0.7 oz.) design capable of 14 amps peak, perfect for sport flying, helicopters, and UAVs. Racers, crawlers, and other splashers can now integrate a 15 amp peak power regulator in a waterproof (WP), CNC machined, aluminum case. Both versions handle up to an impressive 14S without brake enabled or 12S with brake. The CC BEC 2.0 complements our established line of BECs hobbyists have relied on for years. With hundreds of thousands in the field, users can count on this new design to power today’s high-power, digital servos and accessories safely. The CC BEC 2.0 features heavy duty, dual output wires that will provide clean power to sensitive radio equipment. Castle Link2 can be used to set the output from 4.75 to 12 volts and power today’s power hungry servos, cameras, and other accessories. Do it right the first time, invest in the CC BEC 2.0 to protect expensive electronics for the long haul. Note: CC BEC 2.0 should never be operated in series or parallel with another BEC or backup receiver pack connected to the RX/Servo side of the circuit. Footnote: 1. Adjustable Output Voltage may be set with Castle Link (sold separately). Specs: Common applications: Helis, Planes, UAS, Racing Waterproof: No Peak current: 14A (dependent upon input and output voltage) Max volts: Surface: 12S (50.4V) Air (W/Brake): 12S (50.4V) Air (No Brake): 14S (58.8V) Adjustable output voltage2: 4.75 to 12V Default setting: 5.25V Length: 43 mm Width: 14 mm Height: 8 mm Weight: 21 g Continuous current*: 4.75-7.0V output: 9A 7.25V-8.5V output: 8A 8.75V-10.0V output: 7A 10.25-12.0V output: 6A Footnotes: *Ratings are determined with a 5mph airflow at 25° C (77° F). ** Adjustable Output Voltage may be set with Castle Link (sold separately). *** Weight with full length wires, power wires may be shortened to save weight depending on application.

599,-

KJØP
Art.nr: 010-0122-00
Copied
Talon 35: Little package, big BEC.This "mighty mini" can take on the most extreme maneuvers while keeping it's cool. Talon 35 is intended for use in 450 Heli setups running up to 6S or .10 to .20 fixed wing applications pulling up to 35 amps and boasts a 7 amp peak/5 amp continuous BEC, keeping even the most draining servos at ease. Talon 35 also offers Castle's industry-leading helicopter functions, not to mention easy programming using the Castle Link USB adapter. The compact layout and thin profile make mounting Talon 35 simple and stress-free in any setup. Specs: Input voltage: MIN: 2S LiPo - MAX: 6S LiPo Max continuous amperage at full throttle: 35 amps* BEC voltage (voltage regulator for powering radio and servos): 5.5 volts BEC output: 7 amp peak** - 5 amp continuous (always check servo draw prior to first flight) Dimensions & Weight: Width: 22.4 mm Length: 49 mm Depth: 8.4 mm Weight (with wires): 27.8 g Weight (without wires): 12 g Items needed for operation or installation: Battery connector and motor connectors sold separately Programmability: Fully programmable Castle feature set using Castle Link USB adapter and freely downloadable Castle Link Windows software. *RC HOBBY APPLICATION RATING: 35 amps for the duration of a single 4,000 mAh battery pack with the ESC in contact with a 5 mph airflow of 25C (77F) or cooler air. Controller temperature must never exceed 100C (212F). Exceeding current or temperature ratings may damage components and may shorten the life of the ESC. Always verify system current draw at full-throttle. Decrease load or increase airflow to decrease the ESC’s operating temperature. **Peak indicates amperage sustainable for most servos’ current draw transients. Always confirm servo current draw before the first flight of the model.

899,-

KJØP
Art.nr: 010-0004-00
Copied
This is the CC BEC 10A Receiver Battery Eliminator by Castle Creations. FEATURES: Eliminates the need for a receiver and servo battery pack           Draws higher voltage from the motor batteries and drops it to a             voltage level suitable for the receiver and servos INCLUDES: One CC BEC receiver battery eliminator REQUIRES: Installation in the aircraft SPECS:    Length: 1.2" (30mm)           Width:   .6" (15mm)           Height:  .4" (10mm)           Weight:  .4oz (11g)           Input voltage: 5V to 25.2V (2S to 6S LiPo)           Current output: 12 volts input = 7 amps* continuous, 10 amp peak;             24 volts input = 5 amps* continuous, 7 amp peak             *Ratings are determined with a 5mph airflow on the BEC           Selectable Output: 4.8 - 9.0V via the Castle Link (sold separately)             Default voltage is 5.1V

399,-

449,-

KJØP
-11%
Art.nr: 010-0004-01
Copied
BEC(Battery Eliminator Circuits) er små enheter som fjerner behovet for eget batteri til mottaker og servoer. Enheten mottar høy spenning fra drivbatteriet og justerer ned til passende volt for radiosystemet ditt. Dette er gjerne nødvendig i systemer som drar mye strøm pga. amnge servoer, eller ved bruk av høyre enn 3s drivbatteri. For å justere voltstyrken trengs Castle USB Link (medfølger ikke). This is the CC BEC Pro High Output Switching Battery Eliminator Circuit (BEC)                            from Castle Creations. FEATURES: Ideal for use in larger RC cars, electric aircraft, and electric             helis 500 size and larger that have high power demands for their             radio system           Also works well in larger electric powered RC aircraft and RC             crawlers and monster trucks that use high powered servos   INCLUDES: CC BEC Pro High Output Switching BEC with connectors and instruction             sheet   REQUIRES: Installing between battery and receiver   SPECS:    Max Input: 12S LiPo (50.4V)           Max Output Current: 20 amps peak           Adjustable Output Voltage: 4.8V-12.5V           Max Continuous Current: Input Voltage  Max Continuous Output Current                                      16V                    15A                                      24V                    13A                                      32V                    11A                                      40V                     9A                                      48V                     8A           Length: 1.69" (43mm)           Width: 1.3" (33mm)           Height: 0.94" (24mm)           Weight (w/o wires): 1 oz (29 g)   PS! CC BEC Pro skal ikke brukes i serie eller parallell med annen BEC eller som backup til mottakerpakkke tilkoblet RX/Servo siden av systemet.

799,-

849,-

KJØP
-6%
Viser 1 til 25 (av 314 produkter)
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png