Measures aprox. 2 1/4 x 3 1/4 x 3/8 deep. Includes a magnet that will hold
small parts like e-clips, small pins, etc. where you can get a hold of them.
It's made of a chemical resistant injection molded nylon.
RPM Toe-In Gauge
Quick Notes:
Works with most 1/10 scale cars, trucks & sedans
Accurate to within one half of a degree per side
Our Toe-In gauge allows you to do trackside checks of the toe-in without removing the wheels! Our gauge checks toe through the simple method of comparing the distance between the wheels at the rear of the tire to the distance between the wheels at the front of the tire! Our gauge is accurate to within one half of a degree per side and closer! Also can be used to check the legal width of off-road buggies and trucks. This gauge includes a second adjustment hole to check narrower vehicles such as sedans as well!
Monster Camber Gauge
Quick Notes:
– works with tires up to 6.5 inches (165mm) and taller*
– accurate to within ½°
Description
RPM has combined the most popular genre of R/C – Monster Trucks – with one of the most popular RPM products ever released – the #70992 Precision Camber Gauge. Our Monster Camber Gauge is capable of measuring the camber angle on tires up to 6.5 inches (165mm) and taller (depending upon the belly height of the tire) and as small as 2 inches (51mm) in diameter. The Monster Camber Gauge shares all of the same characteristics of its smaller brother – camber accuracy to within ½°, ease of use, and affordability. Similar to its little brother, the Monster Camber Gauge can measure camber angles way beyond a realistic and usable range (positive or negative 10°!) for universal versatility.
This is the RPM Shock Duplicator.
FEATURES
Works with most 1/8, 1/10 or 1/16 scale shocks
For use with all shocks up to 6-1/4" (158mm) long using 4-40 or 3mm
mounting screws
Compares two shocks at once (shocks not included)
Allows precision length measurement, pivot ball clearance and more
All gauge indicator and scale readings molded directly into tool
INCLUDES
RPM Shock Duplicator with Shock Mounting Hardware and Instructions
Precision Camber Gauge
Quick Notes:
– works with tires up to 4.5 inches (114mm) and taller*
– accurate to within ½°
Description
One of the most critical suspension adjustments on a R/C vehicle is the vehicle’s camber. RPM has proven time after time that even the most experienced drivers cannot set their camber by “eye”. With our Camber Gauge, novice to professional drivers alike can set their camber on all wheels to less than one degree of accuracy! Once camber has been set and documented, this gauge will be able to tell you if a crash has affected your camber! When used in conjunction with #70492 toe-in gauge, you’ll gain a distinct advantage over anyone that does not have our gauges! RPM’s Camber Gauge is the only tool that allows you to do track-side checks in a matter of seconds!
This is the RPM Blue Pinion Case.
FEATURES
Holds 15 pinion gears
Made of blue plastic
Safe holds and encloses pinion gears
Has stickers for quick reference
INCLUDES
1 Blue pinion case
1 RPM decal
1 instructions and gear ratio chart
SPECIFICATIONS: 3 5/8" x 2 1/2" x 15/16"
COMMENTS
Also available in black
There is no need to tighten the pinions to the case
This is a Metric Scale Ride Height Gauge by RPM.
FEATURES: Made of Hard Plastic Construction
Blue and Black in Color
INCLUDES: One Ride Height Gauge
Instructions
REQUIRES: A Vehicle to check
SPECS: Length: 5"
Width: 1-1/2"
COMMENTS: This can be used for On & Off Road Vehicles
This is a Universal (Standard) Ride Height Gauge.
FEATURES
Plastic Construction
Decimal Scale in Inches
INCLUDES
One Gauge
One Instruction Sheet
One Decal
REQUIREMENTS
On-Road or Off-Road Vehicle
SPECIFICATIONS
Length: 5"
Width: 1.25"
Height: 1.5"
Heights From: .15" to .65"