Tamiya 42389 TRF104 Chassis Kit

Art.nr: 42389

Copied

TRF104 er et formel 1-chassis med høy spesifikasjon som tar sjangeren til et nytt nivå! Dette høyspesifiserte 2WD-formelchassiset, bygget rundt karbonfiber- og aluminiumchassis-komponenter, med de fremre underarmene laget av karbonfiberplate, gjør det til en formidabel utfordrer på racerbanen! Videre har chassiset oppdatert fjæring foran og bak, pluss en oppdatert layout som er kompatibel med Li-Po-batterier. Info på engelsk. The TRF104 is a high-spec formula one chassis that takes the genre to a new level! This hi-spec 2WD formula chassis, built around carbon fiber and aluminum chassis components, with the front lower arms crafted from carbon fiber plate, makes it a formidable opponent on the racetrack! Furthermore, the chassis features updated front and rear suspension, plus an updated R/C equipment layout which is compatible with Li-Po batteries. Key New Features: Updated front suspension: • Features plastic upper A-arms. • Camber angle is adjustable freely from +1 to -3 degrees (approximate) using a 2mm hex wrench. • Caster angle is also adjustable at 6, 9 and 12 degrees. (approximate). Updated rear suspension: • Suspension link and T-bar setup are not used. Instead, ball connectors are equipped at motor mount front and rear, and suspension roll is placed at the center of the chassis. • The model centering is controlled by roll springs under the rear shaft, and friction grease on roll dampers at motor mount allow adjustment of roll speed. • The pitching is controlled by FRP suspension plate flex and a TRF damper. R/C equipment layout: • Formula chassis can lose rear grip because of unbalanced weight. To prevent this problem, battery pack, receiver and servo are positioned at the center of chassis to ensure better rear grip. Compatible battery packs: • A square-shaped battery holder is included, for Li-Po battery packs to comply with U.S. open-class regulations. Motor mount: • Motor mount has parts for adjustment of ground clearance and wheelbase: 5 types of ground clearances are adjustable in 0.8mm steps and two wheelbases can be chosen with a difference of 2.5mm. Steering servo & steering linkage: • The laid down steering servo is positioned about 30mm backwards compared to the TRF103 chassis and ensures a low center of gravity. • Features a choice of 4 types of steering linkage adjustments over a range of about 1.8mm length by changing Ackerman plate position to keep direct steering. Rear differential unit: • The rear differential unit is the same as the one used for the TRF103 chassis. Lightweight and durable carbon fiber shaft limits weight and ensures compatibility with rubber tires which are relatively heavy. Two rear wing mount options: • A 2mm thick carbon fiber plate is used to attach the rear wing. In this case, the rear wing is connected to the motor mount, and it moves along with rear suspension. • When adding separately sold Item 53596 Aluminum Servo Stays (Short) as wing mount to attach rear wing, rear wing is connected to suspension plate, and it does not move along with rear suspension. (It remains horizontal even if rear suspension moves.) Front suspension arms: • 2.5mm thick carbon fiber front lower suspension arms have two attachment positions (3mm adjustment for each side) to adjust its width and attach wheels with different offsets. • If using separately sold Item 54153 (F103 Carbon Reinforced Front Suspension Arm) and 53119 (RD Special King Pin Set), the width can be changed to the same 200mm width as the TRF 103 chassis. Full ball bearings: • 1060 Sealed Flanged Ball Bearings (New) x2. • 1050 Sealed Ball Bearing 4 pcs. • 1150 Sealed Ball Bearing 1pc. • 1280 Sealed Ball Bearing 1pc. Specifications: • 1/10 scale R/C model assembly kit. Length: 325mm (excluding front and rear wings), width: 169mm (front axle width excluding front and rear wheels), height: 46.5mm (excluding body mount). • Required to complete: 2-channel radio, steering servo, ESC, 540-size motor, 7.2-7.4volt battery with compatible charger, F-1 body parts set, F1 wheels & tires, and Tamiya PS paint.

5.895,-

6.895,-

KJØP

-15%

Tamiya 47486 - 1/10 RC Tyrell P34 1977 Argentine Grand ...

Art.nr: 47486

Copied

Tamiya 47486 - 1/10 RC Tyrell P34 1977 Argentine Grand Prix The Tamiya P34 Six-Wheeler R/C kit has enjoyed a rich release history. This release is an updated version of the Tyrrell P34 Six-Wheeler as raced at the 1977 Argentine GP (previously released as Item 49154 and 58003). The updates include some changes, which include updated instruction on the color needed to paint the side mirrors, and livery location tweaks. About the Tyrrell P34 The Tyrrell P34 is known as the distinctive “six-wheeler” Formula One race car and its 1977 Argentine GP version featured a full cowl body design without observation windows seen on the side of the cockpit. • 1/10 scale R/C model assembly kit. Length: 435mm, width: 104mm, height: 206mm. • The body is injection molded in white and blue to realistically depict the Tyrrell P34 1977 Argentine GP version. • The 6-wheel F103 chassis is equipped with friction dampers and facilitates high-speed running despite its 2WD simple structure. • Small front and large rear tires are high-grip sponge type. • RS-540 Sports Tuned Motor (Item 53068) is included. Requires: 2-channel radio steering servo ESC small 7.2volt battery with charger. Specs: Adjustable Gear Ratio Yes Bearings Plastic bushing Body Material ABS Plastic Body Stickers Included Chassis Material FRP Plate Chassis Type F103 Construction Type Assembly Kit Differential Type Ball Pressure Plate Drive Type 2WD Electronic Speed Control (esc) Not Included Motor 540-brushed type Required To Complete 2-channel radio, steering servo, ESC, small 7.2volt battery & battery charger, and Tamiya TS paint. Scale 1/10 Shock Damper Friction type Suspension Coil King Pin Front/mono-shock rear Terrain Use On-Road

3.495,-

3.695,-

Ikke på lager

-5%

Tamiya 58652 F104 PRO II W/BODY 1:10

Art.nr: 58652

Copied

Her får det det perfekte F-1 rc-bil byggesettet fra Tamiya. Her gjenskapes det strømlinjeformede F104-chassiset med et nytt nedre dekk, og oppgraderte deler, noe som gir en skarp og responsiv kjøring. Et helt nytt  karosseri er også inkludert! Må kompletteres med: Radio og mottaker 4.8 ~ 7.4kg servo eller sterkere (25T) NiMH eller LiPO batteri (round case) ESC (fartskontroller) Motor Batterilader Anbefales: Kulelagre   Tamiya har et bredt sortiment med maling. Anbefalte farger: PS-5 Black PS-4 Blue TS-14 Black X eller XF til hjelm, etter eget ønske. Om modellen • Dette er et 1/10 R/C-modellmonteringssett. Lengde: 440 mm, bredde: 180 mm, høyde: 88 mm, akselavstand: 270 mm. • Det lette F104-chassiset er utstyrt med forskjellige oppgraderte deler for å gjøre det om til F104 PRO II. • FRP-dobbeltdekks chassis har en ny design på nedre dekk, og en inline (langsgående) batteriposisjon. • Den 1,5 mm tykke FRP T-stangen med U-formet utskjæring er arvet fra F104WGP. Den utgjør bakopphenget sammen med friksjonsplater og en TRF-demper. • Har front uavhengig spiralfjæroppheng. Endre camber ved å endre retning for øvre monteringsfeste. • Bruker en kuledifferensial av aluminium. Bakhjulene kan skiftes uten at de demonteres. • Et realistisk originalt lexan karosseri er inkludert. Designet er inspirert av 2017-trender, med en skarp, skrå nese og svulmende sidepontonger. Ekstra deler er inkludert for å lage alternative nedre sidepontongseksjoner som separate deler for chassis med større R/C-utstyr. • Separate deler viser den komplekse frontvingen og dens lave bakre motstykke, bakre diffusor, speil, hjelm osv. • Leveres med realistiske semi-pneumatiske syntetiske gummidekk, og merkeklistremerker for å dekorere kroppen. • Et bredt utvalg av Hop-Up Option-deler er tilgjengelig for å justere chassiset ytterligere til dine behov.

3.695,-

3.995,-

KJØP

-8%

Tamiya 58681 Formula E Gen2 Chlivery TC-01

Art.nr: 58681

Copied

Formula E has established itself as a major global racing series and from 2020 has earned official world championship status from the FIA. The series only uses electric cars, making it an ideal subject for Tamiya, the renowned maker of electric R/C models. We are pleased to introduce the championship livery version of the Gen2 car design to grace the series in this and the previous season. The base for this model is the exciting all new TC-01 chassis, which features an exceedingly low-profile design for maximum effect from this and other formula car bodies. About the Model • This is a 1/10 scale R/C model assembly kit. Length: 430mm, width: 188mm, height: 99mm. • The stylish, sleek Formula E Gen2 body with cowled wheels is captured accurately and with elegance in polycarbonate. Separate polycarbonate components recreate rear wing and side parts. • Halo and mirror components are molded in white ABS. • Stickers are included to recreate the championship car livery. • The new TC-01 chassis is a highly adaptable, low-profile design. • Tamiya Type 540 Motor are included. About the TC-01 chassis • In addition to the unique Formula E Gen2 body, this chassis is compatible with standard touring car measurement bodies. Wheelbase: 257mm. • A hybrid combination of monocoque and upper frame is reminiscent of that seen on the TA07 and other modern Tamiya chassis. It offers superior rigidity and the potential for a whole range of setups. • All-new front and rear inboard suspension utilizes identical left and right long arms and uprights for optimal leverage ratio and streamlined maintenance. Oil dampers are actuated by push rods and rocker arms. • Use of different spacers allows alteration of camber, caster and toe angles for maximum freedom of setup. • Change bumpers and body mounts to switch between formula and touring car layouts. • The shaft-driven 4WD layout uses TB-05 design oil-filled gear differentials for smooth, efficient drive. • Compatible with IFMAR standard dimension battery packs. • Plenty of Hop-Up Option parts are planned to soup up the chassis even more! • This is a 1/10 scale R/C racing chassis kit. Length: 370mm, width: 187mm, wheelbase: 257mm. • Adjustable suspension mounts and plastic bushings allow fine tuning of roll center, toe and skid angle settings. • High performance Super Short Big Bore Dampers give super-responsive handling and great corner speed. They are equipped with the latest reinforced V parts, 5.8mm ball connectors and damper caps for truly optimized performance. • Dedicated carbon fiber front-center stiffener elevates pitch rigidity without sacrificing roll flex, for improved front grip and cornering.. • Includes a dedicated new servo mount component. • Integrated stabilizer end and 5mm adjuster parts are used on the new soft front and rear stabilizers. • Aluminum steering bridge and pivot mounts allow fine tuning of steering Ackerman. • Comes in a handy and stylish carry case package. • Please note that body, motor, wheels, tires and R/C equipment are sold separately. Dedicated Components: Carbon front center stiffener Aluminum stiffener mount TA07RR servo mount Soft stabilizers (front & rear)

3.695,-

3.995,-

KJØP

-8%

Tamiya 58731 1997 CLK-GTR (TC-01)

Art.nr: 58731

Copied

1/10 RC 1997 Mercedes-Benz CLK-GTR (TC-01) byggesett. Har tidligere blitt levert på TA-03R og TT-01E chassis, men kommer nå på TC-01 chassis som er et høyytelse chassis med lavt tyngdepunkt. Mercedes-Benz CLK-GTR tok seks seire i FIA GT-mesterskapet i 1997. Den hadde 6-liters V12 motor og over 600 hestekrefter.   Må kompletteres med: Radio og mottaker 540 type motor Lavprofil servo ESC (fartskontroller) med liten formfaktor NiMH eller LiPO batteri Batterilader PS Lakk Anbefales: Kulelagre Tamiya har et bredt sortiment med maling. Du kan se hele sortimentet her.   Anbefalte farger: PS-5 Black PS-12 Silver PS-31 Smoke TS-17 Gloss Aluminum TS-29 Semi Gloss Black (alternativ X-18 Semi Gloss Black) X-8 Lemon Yellow X-11 Chrome Silver

3.195,-

3.995,-

KJØP

-20%

Tamiya 47484 1/10 RC 1990 Mercides Benz C11

Art.nr: 47484

Copied

Tamiya 1/10 RC 1990 Mercides-Benz C11 Tamiya welcomes back the 1/10 R/C 1990 Mercedes-Benz C 11 kit which was released as Item 58088 in 1990 and Item 58351 (finished body) in 2004. Although it’s been about 18 years since the last release, this model is still popular among R/C fans because of its rich racing history heritage! About the Mercedes-Benz C11 The Mercedes-Benz C11 is a Group C prototype race car introduced for the 1990 World Sports-Prototype Championship. Built by Sauber as a successor to the Sauber C9, the C11 used the same Mercedes-Benz M119 5.0L twin turbo V8. It was the first time that Mercedes-Benz chose to put their name on the car, instead of simply using Sauber. • 1/10 scale R/C model assembly kit. Length: 490mm, width: 206mm, height: 110mm. • Body and large rear wing are made from 1mm thick polycarbonate. • Composite chassis features ABS resin bathtub with front and rear space frames and FRP plates. • Direct drive 2WD chassis transmits motor power directly to spur gear. • 3-point suspension setup places the rear gearbox on a CVA oil-dampened T-bar. Ground clearance is adjustable (front: 2 settings, rear: 3 settings) according to running surfaces. • Features ball differential and high-grip foam sponge tires. • RS-540 Sport Tuned Motor included. Requires: 2-channel radio steering servo ESC 7.2volt battery with charger Tamiya PS paint. SPECIFICATIONS Adjustable Gear Ratio Yes Bearings Plastic bushing Body Material Polycarbonate Body Stickers Included Chassis Material ABS Plastic Construction Type Assembly Kit Differential Type Ball Pressure Plate Drive Type 2WD Electronic Speed Control (esc) Not Included Motor 540-brushed type Required To Complete 2-channel radio, steering servo, ESC, 7.2volt battery & battery charger, and Tamiya PS paint. Scale 1/10 Shock Damper CVA Oil Filled and coil king pin Suspension Coil King Pin Front/mono-shock rear Terrain Use On-Road     Tamiya 1/10 RC 1990 Mercides-Benz C11 Tamiya bringer tilbake Mercedes-Benz C 11 fra 90'tallet bygget på den gode gamle Group-C chassis i en Limited-Edition versjon.   Tamiya re-lanserer denne fantastiske 1:10 rc bilen fra 90'tallet. 1990 Mercedes-Benz C 11 settet som ble utgitt som Varer 58088 i 1990 og Vare 58351 (ferdig karosseri) i 2004. Selv om det har gått omtrent 18 år siden forrige utgivelse, er denne modellen fortsatt vilt populær blant rc-fans på grunn av sin rike racing historie!   Mercedes-Benz C 11 er en gruppe C prototype racerbil introdusert for 1990 World Sports-Prototype Championship. Bygget av Sauber som en etterfølger til Sauber C 9, brukte C 11 den samme Mercedes-Benz M119 5.0L twin turbo V8. Det var første gang Mercedes-Benz valgte å sette navnet sitt på bilen, i stedet for bare å bruke Sauber. Dette er en fantastisk racer med gode kjøreegenskaper, lav bakke klaring og seriøst fart med den riktige motoren. Tamiya har trofast gjengitt denne elegante racermaskinen i 1/10 skala på karosseriet groupe-C chassis.   Spesifikasjoner: Lengde: 490mm. Bredde: 206mm. Høyde: 110mm   inkluderet i dette byggesettet. 540-type Motor.   Varer som kjøpes separat for at bilen er klar for kjøring. 2-kanals radiosystem med sender. 1 servo. Batteri (6 cell NiMH 7,2V) og lader. ESC (elektronisk hastighetskontroll) Polykarbonatlakk for body. I de fleste Tamya byggesett følger det med noe verktøy, men man må beregne at det må brukes verktøy som de fleste har i hjemmet. Skruetrekker, kniv etc.

2.195,-

KJØP