Denne håndkontrollen passer til Scalextric Digitale Powerbases. Kan ikke brukes på standard eller andre eldre analoge Powerbases.
Håndkontrollen har tre knapper:
Gi gass
Bremse
Bytte kjørefil (må ha Straight Lane Change Track C7036 for å benytte denne funksjonen)
Inneholder:
1 stk. Digital Håndkontroll
8 stk. forskjellige farge topper (blå, lilla, rød, oransje, gul, grønn, svart og hvit)
Scalextric Track support & Clip pack. Bygg broer og opphøyninger på banen din. Pakken inneholder 20x broelementer som kan settes sammen til ulike høyder av brostøtter. Det medfølger også 10x fester mellom brostøttene og skinnene.
Inneholder:
20 stk broelementer
10 stk fester mellom brostøttene og skinnene
Scalextric Dekor Control Tower, det perfekte tilbehøret til bilbanen din. Kontroll tårnet er med på å gjøre banen mer realistisk. Lagd av solid plastikk som gjør bygningen robust og det tar kun noen få minutter å sette den sammen. Følger med instruksjonshefte og et ark med dekaler (klistermerker).
Kontroll tårnet er akkurat like lang som en half straight rettskinne (175mm).
Scalextric sine bygninger har utbyttbare moduler.
Info fra Scalextric:
A control tower building to accessorise you track layout. Made of sturdy plastic, this building is robust and takes just minutes to assemble. Full assembly instructions and a sheet of decals are included.
The Control Tower building is exactly one half-straight wide (C8207).
The Scalextric range of buildings have interchangeable modules. First floor sections can be moved from one ground floor base to another
Tribune for å komplettere din bane. Laget av solid plast. Bygningen er robust og tar kun minutter å sette sammen. Instruksjoner og dekaler følger med. Bredden er tilpassen en halv langstrekke(tilsvarer skinne C8207).
The Scalextric range of buildings have interchangeable modules. First floor sections can be moved from one ground floor base to another.
Scalextric Dekor Pit Garage, er det perfekte tilbehøret til bilbanen din. Garasjen er med på å gjøre banen mer realistisk. Lagd av solid plastikk som gjør bygningen robust og det tar kun noen få minutter å sette den sammen. Følger med instruksjonshefte og et ark med dekaler (klistermerker).
Pit garasjen er akkurat like lang som en half straight rettskinne (175mm).
Scalextric sine bygninger har utbyttbare moduler.
Info fra Scalextric:
A pit lane building to accessorise you track layout. Made of sturdy plastic, this building is robust and takes just minutes to assemble. Full assembly instructions and a sheet of decals are included.
The Pit Garage building is exactly one half-straight wide (C8207).
The Scalextric range of buildings have interchangeable modules. First floor sections can be moved from one ground floor base to another.
SPARK PLUG WIRELESS DONGLE
TABLET OR PHONE CONTROL
You can now control your Scalextric car with your phone!
Spark Plug is the latest innovation from Scalextric which allows you to race your car using your Android or IOS smart device. Simply plug the Spark Plug Wireless Dongle into your Scalextric analogue powerbase instead of a traditional hand controller, download the app and race away with no wires in the way!
AWESOME APP-BASED FEATURES
Other in-app features include:
• Single Player or Verses mode options
• Option to use smart device vs hand controller in single player mode
• Function to BOOST your own speed and RESTRICT your opponent’s
• Rumble feature with engine noise and other sound effects
PERSONALISE YOUR RACING EXPERIENCE
Plus you can personalise your race profile within the app for a unique racing experience:
• Use your own name
• Include images from your camera or image gallery
• Multiple controller skin options
• Select music from the app or your own music library
• Customise for left or right handed play
REQUIREMENTS
Scalextric Spark Plug is compatible with Scalextric 1:32 scale analogue power bases only.
One Scalextric Spark Plug Wireless Dongle supplied. One Wireless Dongle required per player.
The Scalextric Spark Plug is compatible with most Android and IOS devices, and can be downloaded from the Apple App Store or Google Play Store.
ARC Wireless Controllers* allow you to roam around the track without crossing wires with your opponent! Feel the racing intensity with a built in rumble pack and never miss the pit with the brake button.
• Ergonomically designed wireless hand controller**
• Sm range with 2.4 Ghz technology
• Feel the race with rumble pack (11 different rumble patterns)
• Lane changing button for pinpoint overtaking (ARC PRO only)
• Brake button for even more control
• Easy to bind powerbase
• Sleep mode - auto shutdown after 5 minutes saves battery power
• Lanyard included for added security
* Only compatible when used in conjunction with an ARC enabled powerbase (ARC AIR & ARC PRO only, not compatible with ARC ONE)
** Requires 2 x AA batteries
Scalextric Hand Controller with adjustable speed control, suitable for use with newer powerbases and START. Only available with red trigger.
Please check the connection on your powerbase before purchasing.
Scalextric Digital Scalextric Digital represents a ground breaking step forward in the way Scalextric is played. Now, with the DIGITAL system, up to six cars can race on one lane*.
At the press of a button, drivers can switch lanes for overtaking and blocking! F1 EasyFit Digital Plug Most cars produced from 2007 onwards will have, as standard, a socket on the car where the EasyFit Digital Plug is connected to convert the car for use on a SCALEXTRIC DIGITAL layout.
C8516 F1 EasyFit Digital Plug is suitable for fitting to open-wheeled single-seat F1 style DPR Scalextric cars. The conversion only requires a small screw-driver and takes less than sixty seconds to perform.
To Convert a DPR car
1. Unscrew the panel on the base of the car and disconnect the braid-to-motor wiring plug.
2. Connect the F1 EasyFit Digital Plug to the braid-to-motor wiring plug.
3. Replace the retaining screw to secure the F1 EasyFit Digital Plug to the chassis.
Features The F1 EasyFit Digital Plug offer a 'plug and play' solution - DPR Scalextric cars to be digitised in under sixty seconds.
Each C8516 F1 EasyFit Digital Plug can be transferred easily from one car to another. There is no need for a soldering iron or modelling expertise.
Note C8516 F1 EasyFit Digital Plug is suitable for fitting to open-wheeled single-seat F1 style DPR Scalextric cars.
To convert standard DPR Scalextric cars to Digital, use C8515 EasyFit Digital Plug.
Many non-DPR Scalextric cars can be converted to Digital using Digital Chips C7005 and C7006.
* Four car and six car powerbases available
Digitaliseringsbrikke for 1:32 Formel1-biler. Med denne brikken kan du digitalisere en standard 1:32 analog formel1-bil til å fungere med Scalextric digital.
Scalextric Digital represents a ground breaking step forward in the way Scalextric is played. Now, with the DIGITAL system, up to six cars can race on one lane*. At the press of a button, drivers can switch lanes for overtaking and blocking!
EasyFit Digital Plug
Most cars produced from 2007 onwards will have, as standard, a socket on the car where the EasyFit Digital Plug is connected to convert the car for use on a SCALEXTRIC DIGITAL layout. C8515 EasyFit Digital Plug is suitable for fitting to standard DPR Scalextric cars.
The conversion only requires a small screw-driver and takes less than sixty seconds to perform.
To Convert a DPR car
1. Unscrew the panel on the base of the car and disconnect the braid-to-motor wiring plug.
2. Connect the EasyFit Digital Plug to the braid-to-motor wiring plug.
3. Replace the retaining screw to secure the EasyFit Digital Plug to the chassis.
Features
The EasyFit Digital Plug offer a 'plug and play' solution - DPR Scalextric cars to be digitised in under sixty seconds.
Each C8515 EasyFit Digital Plug can be transferred easily from one car to another.
There is no need for a soldering iron or modelling expertise.
Note
C8515 EasyFit Digital Plug is suitable for fitting to standard DPR Scalextric cars.
To convert open-wheeled single-seat F1 style DPR Scalextric cars to Digital, use C8516 F1 EasyFit Digital Plug.
Scalextric C 7014 Pit Lane Track (Left Hand) - Includes Sensor
Product Info
Pair of Scalextric Digital pit lane track sections to create pit lanes for your Digital layouts. Also allows the creation of alternative track routes, for example a single lane rally extension track to a current layout, or converts 2 lanes into 1 lane or converts 2 lanes in to 3 lanes or more. There is no limit to the amount of additional lanes you can add. C7015 Right Hand Pit Lane Track also available. Contents Left-hand Pit In and Pit Out track sections with borders. Alternative pictures are track layout suggestions only.
Tech Specs
Item Scale 1:32 Scale
License No
Number of Parts 1
Compatible with ARC AIR/ARC ONE Yes
Compatible with ARC PRO/Digital Yes
Compatible with Spark Plug No
Track Pieces Included 1
Packaging Type Closed box no window