Hopp til innhold

Droner

Populært i denne kategorien

Art.nr: DIDE1532
Copied
DROMIDA Propeller Set Blue Verso Quadcopter

49,-

KJØP
Art.nr: DIDE1530
Copied
DROMIDA Propeller Set Green Verso Quadcopter

49,-

KJØP
Art.nr: DIDE1533
Copied
DROMIDA Propeller Set Yellow Verso Quadcopter

49,-

KJØP
Art.nr: 0110001170
Copied
EMAX Tinyhawk Lite Adventure RTF Analog ELRS Flott startpakke Nybegynnervennlig Alt i en boks ELRS 1S Emax Tinyhawk Lite Adventure er en 115mm 1s whoopracer for både FPV entusiaster og nybegynnere. Dronen kommer som RTF med alt du trenger som, radio, FPV-briller, USB-lader for 6 batteri og et 1stk 1S 850mAh HV. Dronen kommer med analogt system og integrert ELRS mottaker som støtter den medfølgende E8-radioen.   Betaflight Configurator kompatibel Dronen er kompatibel med Betaflight Configurator, en open source-programvare for flight controllere. Dette gjør det mulig å tilpasse alt fra hastighet og respons til mer avanserte innstillinger, slik at både du og dronen kan utvikle dere sammen.   Spesifikasjoner Mottaker ELRS Main board STM32F411 VTX mW 25/100/400mW Børste motorer 1020 Coreless Propeller 65mm 3-blade Batteri 1S 850mAh HV Kamera E02 Vekt u/batteri 59g   Eskens innhold 1x EMAX Tinyhawk Lite Adventure drone Analog ELRS 1x FPV-briller Transporter 2 (Uten DVR) 1x E8 Transmitter (ELRS) 4x Emax Propeller 1x EMAX 1S HV 850mAh LiPo batteri (EM2.0 kobling) 1x EMAX USB 6-port USB-lader 1x EMAX skrujern og skruer 4x EM2.0 kontakter 1x USB kabel 1x Manual

3.395,-

3.495,-

KJØP
-3%
Art.nr: 72022
Copied
This is the RPM Landing Gear in Black for the LaTrax Alias Quadcopter.     FEATURES Constructed of engineeering grade nylons  Adds 0.8" (20mm) of extra height  Reduces chance of blade strikes when landing in grass  Also spreads center point of each leg further out by 0.45" (11.5mm)  adding stability to take-offs and landings  Replaces the LaTrax #6649 rubber feet   INCLUDES Four Landing Gear Sections   REQUIREMENTS 0.05" hex key wrench for installation

99,-

KJØP
Art.nr: 72025
Copied
This is the RPM Landing Gear in Blue for the LaTrax Alias Quadcopter.     FEATURES Constructed of engineeering grade nylons  Adds 0.8" (20mm) of extra height  Reduces chance of blade strikes when landing in grass  Also spreads center point of each leg further out by 0.45" (11.5mm)  adding stability to take-offs and landings  Replaces the LaTrax #6649 rubber feet   INCLUDES Four Landing Gear Sections   REQUIREMENTS 0.05" hex key wrench for installation

99,-

KJØP
Art.nr: 72042
Copied
Prop Guards for the LaTrax Alias Quick Notes: – extreme strength and durability – weighs in at a mere 4 grams per guard (including hardware) – sold in pairs (two pairs required per Alias) – 0.05″ hex key wrench is required (not included) for installation. Description: The LaTrax Alias is a fun and capable entry-level quadracopter. However, a simple propeller blade strike can easily take out one of its minuscule motors. RPM Prop Guards alleviate that problem. Our Prop Guards are super lightweight and install in a matter of minutes, adding a tremendous amount of protection to both the motors and propellers of the Alias. Each Prop guard is molded in our trademark blend of engineering grade nylons for unmatched strength and durability. While we made our guards extremely tough, we also made them very light to minimize the effects of added weight on the air frame, weighing in at a mere 4 grams per guard! RPM Prop Guards for the LaTrax Alias are sold in pairs (two pairs will be needed for one Alias) and are molded in either black or blue. RPM Prop Guards will pay for themselves the first time you have one of those “oops” moments! Don’t let a mistake ruin your day of fun. Bolt a set of RPM Prop Guards on and let your confidence soar! Tech Notes: RPM Prop Guards are designed as “bumpers” to help deflect light to medium impacts. They are not designed to save the Alias from full speed or gravity fed crashes. Sold in pairs (two pairs are required for one Alias). Four Prop Guards (2 – front & 2 – rear) must be installed at the same time. Failure to install Prop Guards in all four corners may cause adverse flying characteristics. A 0.05″ hex key wrench is required (not included) for installation    

79,-

KJØP
Art.nr: 72045
Copied
These are the RPM Propeller Guards in Blue for the LaTrax Alias Heli.     FEATURES Plastic construction, blue in color  Weighs only 0.14oz (4g) per guard including hardware   INCLUDES Two Prop Guards with Mounting Hardware and Instructions

79,-

KJØP
Art.nr: SK600106-01
Copied
  SKYRC HD FPV GOGGLES - Immersion GO The SKYRC HD FPV goggle with 5.8GHz diversity receivers, can significantly improve reception in the presence of multipathing, by intelligently switching between two independent receivers when signal quality drops. Another useful application of diversity switching is to select the best signal from two antennas, use a patch, and an omni directional antenna to provide 360 degree coverage or use two patch antennas to cover a wider flight area. The goggle keeps it super simple for the FPV flier with auto search functionality, easy press buttons, the exact frequency is displayed on the screen so that you never have to guess which frequency and channel you are on, a wide voltage input from 7V to 18V, and 40CH on the 5.8GHz band! General: Control via 8 Buttons High Comfortable with Durable Materials Adjustable Straps Built-in Speaker with Volume Control Built-in Ventilation Fan OSD Language Weight: 380 g (Excluding Antennas) Size: 195 x 139 x 180 mm LCD Display: Screen Size: 7" Screen Resolution: 1024x600 Field of View: 65 Degree Display Scale: 4:3 or 16:9 Respond Time: 10mS System: PAL/NTSC Auto Selecting Diversity Receiver: Dual Receivers with Dual Antenna Connection Automatic Antenna Switching >-90dB Typical Sensitivity 5.8GHz 5 Band 40-Channel Frequencies Electrical Properties: Supply Voltage: 7-18V Recommended 2-4S LiPo Reverse Voltage Protection Current Consumption 530mA@12V Interface Connectors: 3.5 mm AV In Port 3.5 mm Earphone Port XT30 Power In Port (DC 7-18V) Mini HDMI In Port 2 SMA Antenna Connectors Frequencies (GHz): Band A: 5.740, 5.760, 5.780, 5.800, 5.820, 5.840, 5.860, 5.880 Band B: 5.725, 5.745, 5.765, 5.785, 5.805, 5.825, 5.845, 5.865 Band E: 5.733, 5.752, 5.771, 5.790, 5.809, 5.828, 5.847, 5.866 Band F: 5.705, 5.685, 5.665, 5.645, 5.885, 5.905, 5.925, 5.945 Band R: 5.658, 5.695, 5.732, 5.769, 5.806, 5.843, 5.880, 5.917 Set Includes: SKYRC HD FPV GOGGLE Power Cable AV Cable SpiroNET Omni Antenna Antenna Battery Holder

2.990,-

KJØP
Art.nr: SW-1977CX
Copied
High performance X-Wing™ Laser drone  Reverse Propulsion blad system bidrar til hastigheter opp til 35 MPH Laser kamp med andre Propel™ Star Wars™ droner  Push knapp for 360º luft stunt 2.4 GHz kontroll inkludert  3 farts innstillinger for begynner til erfarne piloter  Høyst detaljert og håndmalt og nummerert modell Special edition collectors box med opplyst display eske  Alder 14+  Batterier: 4x AA 1.5v alkaliske batterier (ikke inkludert) for trådløs kontroller  Gjennomsnittlig lade tid: 30-40 min  Gjennomsnittlig bruks tid: 6-8 min

2.495,-

2.995,-

KJØP
-17%
Art.nr: TRX 3229
Copied
These are the stock replacement 2.5x10mm socket head screws used to attach the cylinder head to the Traxxas Image engine. Features: strong steel design Specifications: 2.5x10mm sockethead screw Includes: Six 2.5x10mm sockethead screws

35,-

KJØP
Art.nr: TRX 6611
Copied
This is the Red Canopy for the Latrax Alias Quadcopter in Red     FEATURES Two-piece plastic construction   INCLUDES Red Canopy with three Screws   SPECIFICATIONS  Length: 3.4" (87.7mm)  Width: 1.9" (47.5mm)  Height: 0.78" (20mm)

59,-

KJØP
Art.nr: TRX 6612
Copied
This is the Blue Canopy for the Latrax Alias Quadcopter in Blue     FEATURES Two-piece plastic construction   INCLUDES Blue Canopy with three Screws   SPECIFICATIONS  Length: 3.4" (87.7mm)  Width: 1.9" (47.5mm)  Height: 0.78" (20mm)

59,-

KJØP
Art.nr: TRX 6613
Copied
This is the Orange Canopy for the Latrax Alias Quadcopter in Orange     FEATURES Two-piece plastic construction   INCLUDES Orange Canopy with three Screws   SPECIFICATIONS  Length: 3.4" (87.7mm)  Width: 1.9" (47.5mm)  Height: 0.78" (20mm)

59,-

KJØP
Art.nr: TRX 6614
Copied
This is the Green Canopy for the Latrax Alias Quadcopter in Green     FEATURES Two-piece plastic construction   INCLUDES Green Canopy with three Screws   SPECIFICATIONS  Length: 3.4" (87.7mm)  Width: 1.9" (47.5mm)  Height: 0.78" (20mm)

59,-

KJØP
Art.nr: TRX 6623
Copied
This is the Main Frame for the Latrax Alias Quad-Rotor Helicopter.   FEATURES Molded plastic construction, black in color  Replaces damaged main frame   INCLUDES Main Frame for the Latrax Alias Quad-Rotor Heli  Four Screws

119,-

KJØP
Art.nr: TRX 6623A
Copied
This is the Main Frame for the Latrax Alias Quad-Rotor Helicopter. FEATURES Molded plastic construction, white in color Replaces damaged main frame INCLUDES Main Frame for the Latrax Alias Quad-Rotor Heli Four Screws

119,-

KJØP
Art.nr: TRX 6623X
Copied
This is the optional Main Frame in Black Chromefor the Latrax Alias Quad-Rotor Helicopter. FEATURES Molded plastic construction with black chrome finish Holds each motor and all other components in place INCLUDES Main Frame for the Latrax Alias Quad-Rotor Heli Four Screws

175,-

KJØP
Art.nr: TRX 6624
Copied
This is the Lower Main Frame for the Latrax Alias Quadcopter.   FEATURES Plastic construction   INCLUDES Lower Main Frame with screws

49,-

KJØP
Art.nr: TRX 6624A
Copied
Main frame, lower (white) / 1.6x5mm BCS (self-tapping) (4)

49,-

KJØP
Art.nr: TRX 6626
Copied
This is the Rotor Blade Set in Black for the Latrax Alias Quadcopter.   FEATURES Plastic construction  Flexible to withstand crashes   INCLUDES Two Rotor Blades  Two 1.6x5mm Button Head Cap Screws

25,-

KJØP
Art.nr: TRX 6627
Copied
This is the Rotor Blade Set in White for the Latrax Alias Quadcopter.   FEATURES Plastic construction Flexible to withstand crashes   INCLUDES Two Rotor Blades Two 1.6x5mm Button Head Cap Screws

25,-

KJØP
Art.nr: TRX 6628
Copied
This is the Rotor Blade Set in Red for the  Latrax Alias Quadcopter in Red   FEATURES Plastic construction  Flexible to withstand crashes   INCLUDES Two Rotor Blades  Two 1.6x5mm Button Head Cap Screws

25,-

KJØP
Art.nr: TRX 6629
Copied
This is the Rotor Blade Set in Blue for the Latrax Alias Quadcopter in Blue. FEATURES Plastic construction Flexible to withstand crashes INCLUDES Two Rotor Blades Two 1.6x5mm Button Head Cap Screws

25,-

KJØP
Art.nr: TRX 6630
Copied
This is the Rotor Blade Set in Orange for the  Latrax Alias Quadcopter in Orange     FEATURES Plastic construction  Flexible to withstand crashes   INCLUDES Two Rotor Blades  Two 1.6x5mm Button Head Cap Screws

25,-

KJØP
Viser 1 til 25 (av 90 produkter)
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png