Varenr TRX 1633
This is a assortment of e-clips, c-clips, and body clips for the Traxxas line of cars and trucks. INCLUDES: 28 of the...
Varenr TRX 1726
This is a replacement antenna tube. Antenna tubes are used to help secure and protect reciever antenna wires....
Varenr TRX 2046
This is the Servo Y Harness for the Dual Steering Servos...
Varenr TRX 2223
This is the Battery Door for the Traxxas TQ transmitter.
Nylon door with latch
Varenr TRX 2226
This is a package of six Spring Conectors for Traxxas TQ transmitters.
Varenr Trx 2335
These are replacement 72mm turnbuckles for Traxxas products.
Includes: 2- 72mm threaded rods.
Comments: These are...
Varenr TRX 2414
This is the Wing Wire from Traxxas.
Prebent steel wire fastens rear wings to chassis on Traxxas cars...
Varenr trx 2427
Gear, 14-T pinion (48-pitch)/ set screw
This is a Sponsor Decal Set for R/C Cars...
Varenr TRX 2615
Wing buttons (2)/ set screws (2)/ spacers (2)/ 3x8mm CS (2)
Varenr TRX 2636
These are the replacement 26mm hard chrome Suspension pins for the Traxxas TRX-3. These hold the upright...
Varenr TRX 2712
This is the Lexan wing for the TRX-1.
Includes: 1 wing
Specs: Length 5 3/4" ...
Varenr TRX 2719
Belleville spring washers (4)
Varenr TRX 2978
Fuse 5A for 2974, 2975 & 2977 chargers
Varenr TRX 3149A
This is the Traxxas Heat Shield Tubing.
Constructed of woven fiberglass...
Varenr TRX 3281
Replacement SPLIT BEVEL CONE for the Traxxas Nitro Vee Boat. This cone is part of the engine assembly.
Varenr TRX 4091
This is the Traxxas On-Board Temperature Gauge. Great for monitoring...
Varenr TRX 4142X
This is an optional Large Knurled Flywheel for use with Starter Boxes.
Large knurles to...
Varenr TRX 4182
This is a Servo Horn to be utilized as a Thorttle/Brake horn on Traxxas Nitro vehicles. Can be used on...
Varenr TRX 4287
Thrust bearing set/ belleville spring washers (2)
Varenr TRX 4336X
Varenr TRX 4619
Belleville spring washers
These are the replacement slipper and differential rings for the Traxxas kits that have slipper clutches and...
Varenr TRX 4968
This is an assortment of linkage wires for the Traxxas T-Maxx
These wires connect the servos to the engine and other...
Varenr TRX 4997
This is the 26 tooth Forward Output Gear Assembly for the Traxxas T-Maxx 4WD Radio Control Monster Truck.
Varenr TRX 4998
This is the 26 tooth Reverse Output Gear Assembly for the Traxxas T-Maxx 4WD Radio Control Monster Truck.
Varenr TRX 5211R
This is the Replacement Roller Clutch for the T-Maxx 2.5....
Varenr TRX 5213
This is the Replacement O-ring for the Backplate of the Traxxas 2.5 Engine. This is the gasket of the...
Varenr TRX 5223
This is the Front and Rear Ball Bearing set for the Traxxas 2.5 nitro engine.
Varenr TRX 5227
These are Replacement Cooling Head Protectors for the Traxxas 2.5 Engine....
Varenr TRX 5234
This is the Carburetor Body, Fuel Inlet Plug, and three O-Rings for the Traxxas 2.5 engine.
Varenr TRX 5244
This is a Replacement Flywheel Nut from Traxxas.
Metal construction. Used on the...
Varenr TRX 5246
This is the Blue Silicone Pipe Coupler for the T-Maxx 2.5
This goes between the tuned pipe and the header
Varenr TRX 5274
This is the Replacement Backplate for the Traxxas 2.5 engine. This backplate is used on the 2.5 equipped with...
Varenr TRX 5288
This is the Crankshaft w/IPS for the Traxxas 3.3 racing engine with starter
Varenr TRX 5434a
These are the Red Shock Springs for the Traxxas Slayer.
FEATURES: 1.6 lb/in tension...
Varenr TRX 5724R
This is the Radio Tray with Retainer for the Traxxas Spartan Brushless Boat.
Varenr TRX 5918X
These are the Optional Aluminum Push Rods for the Traxxas Slayer Pro 4WD Short Course Nitro RTR
Varenr TRX 5931
This is the Upper & Lower Right Front Suspension Arm Set...
Varenr TRX 5932
This is the Upper & Lower Left Front Suspension Arm Set for the...
Varenr TRX 5933X
This is a Traxxas Right Rear Suspension Arm Set for the Traxxas Slayer Pro 4x4.
Varenr TRX 5934X
This is a Traxxas Left Rear Suspension Arm Set for the Traxxas Slayer Pro 4x4.
Varenr TRX 5939
This is a pair of 72mm Turnbuckles for the Traxxas Slayer 4x4.
Assembled turnbuckles with...
Varenr TRX 6542X
This is the Large Knurled Flywheel from Traxxas.
FEATURES: Enables Traxxas glow powered vehicles to be started with...
Varenr TRX 7541X
This is the optional Ball Bearing Set for the for the Latrax Rally Car from Traxxas.
Varenr TRX 7550R
This is the optional Front and Rear Driveshaft Assembly for the Ready to Run Latrax Rally Car from Traxxas...
Trykk Enter for å søke eller Esc for å lukke