Hitec

Art.nr: 57350S

Copied

This is a Hitec 24" Y-Harness Servo Extension. FEATURES One male and two female universal connectors INCLUDES One Hitec 24" Y-Harness Servo Extension REQUIREMENTS Connection to receiver and servos SPECIFICATIONS Length: 24" (610mm)

85,-

KJØP

Hitec 27526 SL 9-Channel Rx FBL System

Art.nr: 27526

Copied

Produktbeskrivelse Designet for å gi suveren pålitelighet, Maxima SL 2.4GHz single line, har rekord høy overførings hastighet på 4096 oppløsning og en utrolig rask 7ms frame rate. Designet for å fungere med de fleste S-Bus kompatibel flybarless systemer og Hitec Aurora 9X og Flash radioer, er Maxima SL en fantastisk mikro-mottaker, med utrolig rekkevidde og pålitelighet. Spesifikasjoner 4096 Oppløsning Full Range Operation Benytter S-Bus Protocol for maksimal Kompatibilitet med de fleste Flybarless Systems Meget lavt strømforbruk 1 S-Bus & 5 utganger spesifikasjoner Dimensjoner: 37 x 24 x 15mm Vekt: 8,2 gr This is the Hitec 2.4GHz AFHSS Maxima XL Low Latency Single Line Aircraft Receiver. FEATURES Compatible only with the Hitec Aurora 9X and Flash series of transmitters Five slots for PWM, one slot for battery and one slot for single line Dual antennas (non-BODA) Fail Safe/Hold function Wide operation voltage, 3.7-9.0V INCLUDES 2.4GHz AFHSS Maxima XL Low Latency Single Line Receiver SPECIFICATIONS Dimensions: 1.45 x 0.97 x 0.44" (37 x 24.8 x 11.2mm) Weight: 0.27oz (7.8g) Operating Voltage: 3.7-9.0V Maximum Current Consumption: 30mA

549,-

KJØP

Hitec 27625 Proton 4E - 4ch Telemetric RX

Art.nr: 27625

Copied

This is the Hitec 2.4GHz Proton 4E 4-Channel Telemetric Receiver for Surface Use. FEATURES Wide operating voltage, 4.8 - 35V Fail safe/hold function Temperature sensor can be used without sensor station Supplemetary Power Connection (SPC) cable Two year warranty through Hitec beginning at date of purchase INCLUDES Proton 4E 4-Ch Receiver Temperature Sensor SPC Cable Instructions SPECIFICATIONS Dimensions: 1.70 x 1.08 x 0.64" (32.8 x 22.3 x 8.3mm) Weight: 0.67oz (6.5g) Operating Voltage: 4.8 - 35V

649,-

699,-

KJØP

-7%

Hitec 32070 HS-70MG Micro Analog Ultra Torque Metal ...

Art.nr: 32070

Copied

Servo i “Feather” størrelse. Nesten 1 Kg / cm mer kraft enn HS–65mg.Dette er Hitec sin økonomiutgave av HS-65mg. Driftsspenning :4,8 til 6,0 V Kraft Kg /cm på 4,8V :2,3 Kg Kraft Kg / cm på 6,0V :3,0 Kg Hastighet ved 4,8V :0,17 sec/60 ° Hastighet ved 6,0V :0,14 sec/60 ° Mål :23,6 x 11,6 x 28,9 mm

449,-

KJØP

Hitec 33785S HS-785HB 3.5 Turn Sail Winch

Art.nr: 33785S

Copied

This is the Hitec HS-785HB Sail Winch Servo with Hitec connectors for use in sail boat applications. FEATURES Karbonite gears Ball bearing Water and dust tight INCLUDES One HS-785HB sail winch servo with Hitec connector One winch servo drum Mounting hardware REQUIREMENTS Nothing SPECIFICATIONS Length: 2.32" (59mm) Width: 1.14" (29mm) Height: 1.96" (50mm) Weight: 3.88oz (110g) Speed: 1.68 sec/60° @ 4.8V 1.38 sec/60° @ 6V Torque: 152.75 oz-in (11 kg-cm) @ 4.8V and 183.31 oz-in (13.2 kg-cm) @ 6V Current (at idle): 8mA (6.0V) Current (running): .230mA (6.0V and load) COMMENTS This servo is larger than standard size servo. Its size is equal to that of 1/4 scale servo.

649,-

729,-

KJØP

-11%

Hitec 35565S HS-5565MH Coreless High-Speed Metal Gear ...

Art.nr: 35565S

Copied

This is the Hitec HS-5565MH High Voltage, High Speed Digital Servo. FEATURES Ideal for 1/10 scale touring cars, buggies and short course vehicles, helicopters up to .90 size, and sport to high performance aircraft up to 25 percent Heavy duty metal gears and dual ball bearings Coreless motor INCLUDES HS-5565MH Servo with 0.94" (24mm) Round Servo Horn, 1.8" (45mm) Round Servo Horn, 2.3" (59mm) Double Sided Servo Arm, 1.1" (27mm) Single Sided Servo Arm, 1.6" (42mm) Four Point Horn, Mounting Hardware and Instructions SPECIFICATIONS Operating Voltage: 6.0 - 7.4V DC 6.0V 7.4V Speed: 0.11 sec/60° 0.09 sec/60° Torque: 153 oz-in (11 kg-cm) 194 oz-in (14 kg-cm) Size: 1.57 x 0.78 x 1.49" (39.8 x 19.8 x 37.8mm) Weight: 2.10oz (60g) Wire Length: 11.8" (30mm) Wire Gauge: 25AWG Operating Temperature Range: -4 to 140°F Idle Current: 4mA Stall Current: 2100mA @ 6.0V, 2700mA @ 7.2V Potentionmeter Type: 4 slider 1M cycle COMMENTS A note on coreless motors-a conventional servo motor has a steel core armature wrapped with wire that spins inside the magnets. In a Coreless design, the armature uses a wire mesh that forms a cup that spins around the outside of the magnet. This arrangement is much lighter resulting in smoother operation and faster response time.

995,-

1.095,-

KJØP

-9%

Hitec 41920 Standard Heli Gyro Pack HG-5000/HSG-5083MG ...

Art.nr: 41920

Copied

This is the Hitec HG-5000 Micro Heading Lock Gyro and HSG-5083MG Micro Digital Tail Rotor Servo. FEATURES Gyro Features; Optimized high response narrow band Hitec signal Universal signal selectable, functions with both analog and digital servos Auto detection for any transmitter and receiver Precision control technology for heading lock Remote gain adjustment Self diagnosis function Low power consumption (20mA) Extreme tolerance against disturbance and vibration Easy data setting and simple LED display Micro Digital Servo Optimized for 400-600 class EP helicopters All metal gear applied (1st MP gear) Non-programmable INCLUDES Hitec HG-5000 Micro Heading Lock Gyro and HSG-5083MG Micro Digital Servo, instructions REQUIREMENTS Assembly and adjustment onto the helicopter SPECIFICATIONS Gyro; Size: 0.86 x 0.86 x 0.43" (22 x 22 x 11mm) Weight: 0.35oz (9.9g) Power Consumption: 20mA Micro Digital Servo; Size: 1.14 x 0.51 x 1.18" (29 x 13 x 30mm) Weight: 0.74oz (21g) Torque: 20.85 oz.in @ 4.8V Speed: 0.07 sec/60° @ 4.8V

695,-

895,-

KJØP

-22%

Hitec 44420 CG-S42 NiMH Lader for sender & ...

Art.nr: 44420

Copied

Dette er hitec sin lader for NiMHbatterier til sendere og mottakere. Inn: 100-240V AC 50/60Hz 0.1A Ut: TX: 7.2V DC 80mA RX: 4.8V DC

179,-

KJØP

Hitec 54403 Micro Switch Harness

Art.nr: 54403

Copied

Micro Switch Harness

59,-

KJØP

Hitec 54404 Micro Switch Harness w/4 AAA-box

Art.nr: 54404

Copied

Micro switch harness with 4 AAA Battery box

85,-

KJØP

Hitec 54407 S Heavy Duty High Channel Switch Harness ...

Art.nr: 54407

Copied

Hitec S Heavy Duty High Channel Switch Harness With RX Charger

189,-

KJØP

Hitec 54603 Aileron Extension 6"

Art.nr: 54603

Copied

This is a Heavy Duty 6" Servo Extension with Hitec-S, JR, Airtronics-Z Connectors. This extension goes between the receiver and the servo to make the wire longer. One end of the wire is a male connector, the other end is female. FEATURES Gold-plated teminals improve conductivity and prevent oxidation for longer lifespan. Heavier, 20-gauge wire handles higher current loads. INCLUDES One 6" Long Servo Extension w/Hitec-S, JR, Airtronics-Z Style Connectors SPECIFICATIONS Wire Gauge: 20

69,-

KJØP

Hitec 54604 Aileron Extension 12"

Art.nr: 54604

Copied

This is a Heavy Duty 12" Servo Extension with Hitec-S, JR, Airtronics-Z Connectors. This extension goes between the receiver and the servo to make the wire longer. On one end of the wire is a male connector and on the other end of the wire is a female connector. FEATURES Gold-plated teminals improve conductivity and prevent oxidation for longer lifespan. Heavier, 20-gauge wire handles higher current loads. INCLUDES One 12" Long Servo Extension w/Hitec-S, JR, Airtronics-Z Style Connectors SPECIFICATIONS Wire Gauge: 20

79,-

KJØP

Hitec 54605 Aileron Extension 24"

Art.nr: 54605

Copied

This is a Heavy Duty 24" Servo Extension with Hitec-S, JR, Airtronics-Z Connectors. This extension goes between the receiver and the servo to make the wire longer. On one end of the wire is a male connector and on the other end of the wire is a female connector. FEATURES Gold-plated teminals improve conductivity and prevent oxidation for longer lifespan. Heavier, 20-gauge wire handles higher current loads. INCLUDES One 24" Long Servo Extension w/Hitec-S, JR, Airtronics-Z Style Connectors SPECIFICATIONS Wire Gauge: 20

59,-

KJØP

Hitec 54606s Aileron Extension 36"

Art.nr: 54606

Copied

This is a Heavy Duty 36" Servo Extension with Hitec-S, JR, Airtronics-Z Connectors. This extension goes between the receiver and the servo to make the wire longer. On one end of the wire is a male connector and on the other end of the wire is a female connector. FEATURES: Gold-plated teminals improve conductivity and prevent oxidation for longer lifespan. Heavier, 20-gauge wire handles higher current loads. INCLUDES: One 36" Long Servo Extension w/Hitec-S, JR, Airtronics-Z Style Connectors SPECS: Wire Gauge: 20 Wire Color Codes- JR- Hitec- Airtronics Z- Brown: ground Black: ground Black: ground Red: positive Red: positive Red: positive Orange: signal Yellow: signal Blue: signal

65,-

KJØP

Hitec 54609 Heavy-Gauge Twisted Wire Aileron Extension ...

Art.nr: 54609

Copied

This is a Hitec 6" Heavy Twisted Wire Servo Extension with JR, Hitec and Airtronics Z Style Connectors. This extension goes between the receiver and the servo to make the wire longer. On one end of the wire is a male connector and on the other end of the wire is a female connector. FEATURES Heavier wire handles higher current loads with ease INCLUDES One 6" Long Servo Extension w/ JR, Hitec and Airtronics Z Style Connectors SPECIFICATIONS Length: 6" (152mm)

69,-

KJØP

Hitec 54611S Heavy Gauge Twisted Wire Aileron ...

Art.nr: 54611

Copied

This is a Heavy Duty 24" Twisted Wire Servo Extension with Hitec-S, JR, Airtronics-Z Connectors. This extension goes between the receiver and the servo to make the wire longer. On one end of the wire is a male connector and on the other end of the wire is a female connector. FEATURES Gold-plated teminals improve conductivity and prevent oxidation for longer lifespan Heavier, 20-gauge wire handles higher current loads Twisted wire design cuts down on electro-magnetic noise (EMI) which can cause radio interference INCLUDES One 24" Long Servo Extension w/Hitec-S, JR, Airtronics-Z Style Connectors SPECIFICATIONS Wire Gauge: 20 Wire Color Codes- JR- Hitec- Airtronics Z- Brown: ground Black: ground Black: ground Red: positive Red: positive Red: positive Orange: signal Yellow: signal Blue: signal

89,-

KJØP

Hitec 54612S Heavy Gauge Twisted Wire Aileron ...

Art.nr: 54612S

Copied

This is a Heavy Duty 36" Twisted Wire Servo Extension with Hitec-S, JR, Airtronics-Z Connectors. This extension goes between the receiver and the servo to make the wire longer. On one end of the wire is a male connector and on the other end of the wire is a female connector. FEATURES Gold-plated teminals improve conductivity and prevent oxidation for longer lifespan Heavier, 20-gauge wire handles higher current loads Twisted wire design cuts down on electro-magnetic noise (EMI) which can cause radio interference INCLUDES One 36" Long Servo Extension w/Hitec-S, JR, Airtronics-Z Style Connectors SPECIFICATIONS Wire Gauge: 20 Wire Color Codes- JR- Hitec- Airtronics Z- Brown: ground Black: ground Black: ground Red: positive Red: positive Red: positive Orange: signal Yellow: signal Blue: signal

79,-

KJØP

Hitec 54701S Y Heavy Duty Extension Wire Short

Art.nr: 54701

Copied

This is a 6" Long, Heavy Duty Y-Harness with Hitec S, JR, Airtronics Z Connectors. Features Hitec 54701S Y-Harness 6" Gold-plated teminals improve conductivity and prevent oxidation for longer lifespan. Heavier, 20-gauge wire handles higher current loads. Specifications Fork in "Y" occurs 2" from the receiver connector Overall Length: 6" Connectors: one male and two female Contents One 6" Long, Heavy Duty Y-Harness with Hitec S, JR, Airtronics Z Connectors

89,-

109,-

KJØP

-18%

Hovedbilde Hitec 54702S Heavy Duty Y-Harness 24

Hitec 54702S Heavy Duty Y-Harness 24" (Long)

Art.nr: 54702S

Copied

This is a 24" Long, Heavy Duty Y-Harness with Hitec S, JR, Airtronics Z Connectors. FEATURES Gold-plated terminals improve conductivity and prevent oxidation for longer lifespan. Heavier, 20-gauge wire handles higher current loads. INCLUDES One Heavy Duty Y-Harness with Hitec, JR, Airtronics Z Connectors SPECIFICATIONS Fork in "Y" occurs 10-3/4" from the receiver connector Overall Length: 24" Connectors: one male and two female

89,-

KJØP

Hitec 54703S 6" Heavy Gauge Twisted Wire Y Harness ...

Art.nr: 54703S

Copied

This is a Heavy Duty 6" Twisted Wire Y-Harness with Hitec-S, JR, Airtronics-Z Connectors. Features Hitec 54703S 6" Heavy Gauge Twisted Wire Y Harness w/Pins Gold-plated teminals improve conductivity and prevent oxidation for longer lifespan Heavier, 20-gauge wire handles higher current loads Twisted wire design cuts down on electro-magnetic noise (EMI) which can cause radio interference Specifications Wire Gauge: 20 Wire Color Codes- JR- Hitec- Airtronics Z- Brown: ground Black: ground Black: ground Red: positive Red: positive Red: positive Orange: signal Yellow: signal Blue: signal Package Contents One 6" Long Y-harness w/Hitec-S, JR, Airtronics-Z Style Connectors Requirements N/A

129,-

KJØP

Hitec 54704S 24" Heavy Gauge Twisted Wire Y Harness ...

Art.nr: 54704S

Copied

This is the Hitec 24" Heavy Twisted Wire Y Extension (Harness) with Universal Connectors (JR, Hitec, Airtronics Z). FEATURES Heavier wire handles higher current loads with ease Has one male connector that plugs into the receiver and two female connectors that normally "Y" out toward two aileron servos INCLUDES One 24" Heavy Twisted Wire Y-Harness w/Universal Connectors (JR, Hitec Airtronics Z) SPECIFICATIONS Overall Length: 24" (610mm) not including connectors Length up to the Y: 12.5" (317mm) Length of each extension after the Y: 11.25" (286mm) Wire Color Codes- JR- Hitec- Airtronics Z- Brown: negative Black: negative Black: negative Red: positive Red: positive Red: positive Orange: signal Yellow: signal Blue: signal

99,-

KJØP

Hitec 54801 S Connector Male Set

Art.nr: 54801

Copied

These are the Hitec Unassembled Male S Connectors. FEATURES Compatible with Futaba J systems Allows modelers to custom make their own extensions, servo leads, battery leads and more No soldering required INCLUDES 3 sockets and 1 unassembled male shell REQUIREMENTS Servo wire Wire crimping tool

23,-

KJØP

Hitec 55305 HS-646WP/5646WP Metal Gear Set

Art.nr: 55305

Copied

Drevsett for HS-646WP/5646WP i metall.

289,-

329,-

KJØP

-12%

Hitec 55325 HS-7954SH Steel Gear Set

Art.nr: 55325

Copied

Steel Gear Set for Hitec Servo 7954SH

399,-

KJØP

Populært i denne kategorien

SamiRC Norge AS

Om oss

Kundeservice

Totalt:

Søkeresultater

Hitec

Populært i denne kategorien

Totalt:

Tamiya El-biler

Kyosho-Biler

Mini-Z

Carson

Tamiya Lastebiler

Reservedeler til Lastebil

Reservedeler til Hengere

E-flite RC

Traxxas & Latrax Reservedeler

Sendere

Spektrum sendere

Spektrum mottakere

Mottakere

Spektrum Mottakere

Telemetri

Hitec

Servoer

Servoer etter størrelse

Reservedeler

Option-parts

Option Parts Biler

Tamiya Biler

Servo anbefalinger til biler

Maverick biler

Traxxas biler

Kyosho biler

Mini-Z biler

Tamiya biler

HPI Biler

Redcat

Servo anbefalinger til båt

Crawler motor & regulator

Børsteløs/Brushless

Børsteløs combo

Børsteløs motor

Børsteløs Bil motor

Børsteløs regulator

Reservedeler til motorer

Flymotorer

OS motorer

Lipo

Lipo 3 celler 11.1 volt

3 celler sortert etter plugg

Lipo 4 celler 14,8 volt

4 celler sortert etter plugg

NiMH

Mottakerbatteri

Batteri etter produsent

LiFe

Traxxas Biler

Traxxas 68086-4 Slash 4x4 VXL

Traxxas Båter

Alle fly

Redcat Biler

Maverick biler

Kyosho biler

Kyosho Mini-Z

HPI biler

Reservedeler etter Produsent

Traxxas El-Biler

Arrma

Traxxas Nitro-Biler

Tamiya El-Biler

TT-01

Axial El-Biler

SCX10 Honcho

Kyosho-El-biler

Mini-Z deler

Kyosho Fazer D2 FZD2

Utgåtte Kyosho biler

Kyosho Nitro Biler

RC4WD-Biler

Vaterra-Biler

WL-Toys

HAIBOXING Biler

Helion-biler

BSD Biler