Hopp til innhold
Hjem / Biler / El-biler / Tamiya El-biler

Tamiya rc bil

Populært i denne kategorien

Hovedbilde BT-01 chassis

BT-01 chassis
Hovedbilde Alle Tamiya Bilene

Alle Tamiya Bilene
Hovedbilde Collectible rare kits

Collectible rare kits
Hovedbilde Vintage re-release biler

Vintage re-release biler
Hovedbilde CC-01 chassis

CC-01 chassis
Hovedbilde CC-02 chassis

CC-02 chassis
Hovedbilde Gf-01Cb

Gf-01Cb
Hovedbilde MB-01

MB-01
Hovedbilde M-05

M-05
Hovedbilde M-06

M-06
Hovedbilde M-08

M-08
Hovedbilde DT-04

DT-04
Hovedbilde TT-01

TT-01
Hovedbilde TT-02 Biler

TT-02 Biler
Hovedbilde TA-02SW

TA-02SW
Hovedbilde TA03R-S

TA03R-S
Hovedbilde TA08

TA08
Hovedbilde Terrengbiler 4WD

Terrengbiler 4WD
Hovedbilde XV-01

XV-01
Hovedbilde XV-02

XV-02
Hovedbilde Terrengbiler 2WD

Terrengbiler 2WD
Hovedbilde Driftebiler

Driftebiler
Hovedbilde Buggy 2WD

Buggy 2WD
Hovedbilde Buggy 4WD

Buggy 4WD
Hovedbilde Ferdigbygget XB RTR

Ferdigbygget XB RTR
Hovedbilde Ferdigbygget X-SA

Ferdigbygget X-SA
Hovedbilde Monstertrucks

Monstertrucks
Hovedbilde Rally

Rally
Hovedbilde Banebiler

Banebiler
Hovedbilde Formel 1 biler

Formel 1 biler
Hovedbilde WR-02C

WR-02C
Hovedbilde Tamiya 1/10 1990 Land Rover Defender 90 CC-02 NO ESC Hovedbilde Tamiya 1/10 1990 Land Rover Defender 90 CC-02 NO ESC
Tamiya 1/10 1990 Land Rover Defender 90 CC-02 NO ESC
Art.nr: 58700
Copied
Tamiya 1/10 RC 1990 Land Rover Defender 90 (CC-02 Chassis) Length: 429mm. Image shows painted and assembled kit. Land Rover Legend Loved by millions across the world for its superb 4WD performance and distincive functional form, the Land Rover Defender had a long production run from 1948 until 2016. This R/C model assembly kit recreates the short wheelbase Defender 90 variant from 1990, with the unmistakeable form captured by a polycarbonate body featuring front and rear light cases which are compatible with separately sold LEDs. Separate molded parts are included to depict features such as the outer roll cage, front grille and spare tire cover. The CC-02 chassis is a great base, providing a sure-footed drive whether on-road or off.   ★Take a look at the model from the rear, with the timeless, squared-off lines of the Defender 90 expertly depicted by a polycarbonate body.   ★Separate injection molded parts in the kit include the barred front grille, which adds another layer of detail to this classic body.   ★Tough polycarbonate-ABS components are used to create the outer roll bar, a big part of the model’s off-road look.   ★Spare tire cover depiction is also molded as a separate, and the DEFENDER logo on it is recreated using the included sticker.   ★Six-spoke wheels molded in black plastic lend the model a highly realistic look, and are paired with capable block pattern tires.   ★For those who want even more realism, the model headlights can be paired with separately sold LEDs to light up the Defender!   CC-02 Chassis – Off Road, Evolved Designed for a wide range of off-road scenes including rocky terrain, the CC-02 chassis’ ladder frame is inspired by full-size vehicles and is the base for its superior durability. A 4WD setup employs the motor longitudinally behind the front axle with separated gearbox and transfer case, and propeller shafts transmitting power to the differential gears front and rear. Four-link rigid suspension is employed front and rear, with CVA oil dampers for all-encompassing control, even on tricky rock sections. This model comes with black six-spoke wheels and grippy block pattern tires. In this kit, the chassis is assembled with a 242mm wheelbase.   ★A highly capable off-road drive awaits, with shaft-driven 4WD and front/rear 4-link rigid suspension setups on the CC-02 chassis.   ★The ladder frame is modeled upon those employed by full-size cars, and offers excellent rigidity on this 1/10 scale vehicle.   ★Axle housings are molded in reinforced plastic, and house 3-bevel differentials. They can be locked when running on lower-grip surfaces.   Specifications ★Length: 429mm, Width: 200mm, Height: 215mm ★Wheelbase: 242mm　★Tread: 160mm (Front), 163mm (Rear) ★Tire Width/Diameter: 33/90mm (Front & Rear) ★Ladder Frame ★Longitudinal Motor, Shaft-Driven 4WD ★3-Bevel Differential Gears ★4-Link Rigid Suspension (Front & Rear) ★Gear Ratio = 17.33:1 (using kit-standard 16T pinion) ★Type 540 Motor ★Electronic Speed Controller (ESC) is sold separately.   Separately Required Items ★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger The Defender 90 is a legendary Land Rover off-road car, and its roots go back to 1948. Based on differences in wheelbases, this car has three types – the Defender 90/110/130. This R/C model depicts a 3-door model with 93-inch wheelbase. CC-02 Chassis - Off Road, Evolved Designed for a wide range of off-road scenes including rocky terrain, the CC-02 chassis' ladder frame is inspired by full-size vehicles and is the base for its superior durability. A 4WD setup employs the motor longitudinally behind the front axle with separated gearbox and transfer case, and propeller shafts transmitting power to the differential gears front and rear. Four-link rigid suspension is employed front and rear, with CVA oil dampers for all-encompassing control, even on tricky rock sections. This model comes with black wheels and grippy block pattern tires. • 1/10 scale R/C model assembly kit. Length: 429mm, width: 200mm, height: 215mm, wheelbase (short): 242mm (CC-01S chassis). • Polycarbonate body pre-painted in light blue. • Compatible with 5mm-diameter LEDs x2 for headlights and 5mm-diameter LEDs x6 for the rear. • Includes separately molded parts for grille, side mirrors, light cases and outer roll gages. • Black ABS resin wheels are paired with semi-pneumatic all-terrain rubber tires. • The ladder frame CC-02 chassis features superior durability and employs front/rear coil spring suspension which is great for off-road surfaces including rocky terrain. • Includes 540 Type brushed motor. • A wide range of Hop-Up Option Parts is available to customize the CC-02 chassis. Specs: Adjustable Gear Ratio Yes Bearings Plastic bushing Body Material Polycarbonate pre-painted body Body Stickers Included Chassis Material FRP Fiberglass Reinforced Plastic Chassis Type CC-02 Construction Type Assembly Kit Differential Type Gear Drive Type 4WD Motor 540-brushed type Required To Complete 2-channel radio,esc, steering servo, 7.2volt battery & battery charger Scale 1/10 Shock Damper CVA Oil Filled Suspension 4-link Terrain Use Multi-Purpose

3.295,-

3.495,-

KJØP
-6%
Hovedbilde Tamiya 1/10 TOYOTA GR SUPRA (TT-02) no ESC Hovedbilde Tamiya 1/10 TOYOTA GR SUPRA (TT-02) no ESC
Tamiya 1/10 TOYOTA GR SUPRA (TT-02) no ESC
Art.nr: 58674
Copied
This TAMIYA R/C model recreates the ALL-NEW 2019 Toyota Supra. The Supra has not been in production since 2002 and Toyota has brought it back thanks to a collaborative effort with BMW. The chassis, drivetrain, and engine are based on the BMW Z4. The body and suspension tuning were developed by Toyota to give the Supra a distinctive and classic Toyota sporty feel. Tamiya has faithfully recreated the Supra for radio control enthusiasts with a polycarbonate body that captures the sleek lines and it sits on top the easy to build and drive TT-02 chassis. TT-02: Adaptable, Balanced Shaft Driven 4WD The shaft-driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to give excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports. • 1/10 R/C model assembly kit. Length: 457mm, width: 188mm. • Body is molded accurately in lightweight and durable polycarbonate, with separate light cases front and rear. NOTE: Not LED light compatible. • Features separate molded parts for side mirrors. • Twin 5-spoke wheels are molded in black, and paired with racing radial tires. • The TT-02 chassis is an adaptable and balanced design with excellent stability, plus features such as identical suspension arm and upright components for ease of assembly. • 4-bevel differential gears and 4-wheel double wishbone suspension make for a smooth ride. • Includes 540-type motor. • Requires: 2-Channel Radio, servo,esc 7.2-7.4volt battery pack & compatible charger, and Tamiya PS paints.

1.395,-

1.595,-

KJØP
-13%
Hovedbilde Tamiya 1/10 XB WR02G Tumbling Bull 2WD RTR Car Kit EP ... Hovedbilde Tamiya 1/10 XB WR02G Tumbling Bull 2WD RTR Car Kit EP ...
Tamiya 1/10 XB WR02G Tumbling Bull 2WD RTR Car Kit EP ...
Art.nr: 57871
Copied
Tamiya 57871 1/10 XB WR02G Tumbling Bull 2WD RTR Car Kit EP w/ 2.4GHz Radio   This is Tamiya 1/10 XB WR02G Tumbling Bull 2WD RTR Car Kit EP w/ 2.4GHz Radio. Take a trip back in time with this tractor-inspired R/C model assembly kit! The durable polycarbonate body is pre-painted in red and really captures the form of a 1930s-era European tractor, with a stretched bonnet, rear driver’s seat and big overarching fenders on the rear wheels. A finished driver figure is included in the kit to round off the look! The model runs on the rear wheel drive WR-02G chassis, with a sturdy monocoque frame and centrally-positioned motor plus 97mm (front) and 130mm diameter (rear) wheels. It also includes 4-wheel double wishbone suspension and sealed gearbox containing the differential. Slam on the throttle for wheels-in-the air driving action, try extravagant spin turns and enjoy driving this fun model! The rear wheel drive WR-02G chassis was made for rough riding! Shielded by side frames and held tightly in place by the monocoque frame, the fully-sealed gearbox is well-protected from impact. Power is provided to the rear wheels by a centrally-positioned motor, and transmitted via the differential in the gearbox. The location of the battery pack is key: its longitudinally-placed position high in the rear ensures that when the model accelerates, the front naturally rises in a wheelie. At that point, the wheelie bar on the model’s rear stops the model from toppling over, and in doing so maintains a great wheelie! Steering servos are placed along the center of the chassis, and they combine with the 2-piece tie rod for precision steering. The suspension is of the tough 4-wheel double-wishbone variety. In addition to the painted body, this item also includes a wheel-type transmitter, battery pack and charger to allow instant enjoyment of driving. (*Battery pack and charger are included for Japan market only.) The 2.4GHz transmitter eliminates the need for frequency crystals, and is factory-paired with the receiver in the model to ensure that the receiver communicates with that transmitter only.   Feature:   Resin Monocoque Frame Rear Wheel 2WD 4-Wheel Double Wishbone Suspension Front/Rear Friction Dampers 2-Piece Steering Tie Rod 3-Bevel Differentials Type 540 Motor Electronic Speed Controller (Forward/Reverse Type)   Specification:   Length: 345mm Width: 253mm Height: 235mm Wheelbase: 170mm Tread: 189mm (Front), 195mm (Rear) Tire Width/Diameter: 57/97mm (Front), 58/130mm (Rear) Gear Ratio: 18.3:1   Include:   Tamiya 1/10 XB WR02G Tumbling Bull 2WD RTR Car Kit EP w/ 2.4GHz Radio (1 set)   Required:   Batteries

4.995,-

KJØP
Hovedbilde Tamiya 1/18 R/C Dynahead 6x6 (G6-01TR) Hovedbilde Tamiya 1/18 R/C Dynahead 6x6 (G6-01TR)
Tamiya 1/18 R/C Dynahead 6x6 (G6-01TR)
Art.nr: 58660
Copied
Happy Trials... This R/C model assembly kit creates the Dynahead 6x6. Its polycarbonate body is inspired by a cabover trial trucks particularly popular on the European scene, and designed by Takayuki Yamazaki. The boxy design features rear-hinged door motifs and has a wild look perfectly suited to the off-road. The model is based upon the 6-wheel drive G6-01TR, which offers extreme performance on tough surfaces, and thanks to its long wheelbase can even negotiate slopes of up to 40 degrees. ★The polycarbonate trial truck-inspired body has ample character! ★Marking stickers are included in the kit to add decoration to the body.     G6-01TR Chassis: Immense Traction Reduction gears on each axle slow drive shaft rotation to give the 6-wheel drive G6-01TR chassis an overall gear ratio of 37.35:1, for immense traction, which along with its great ground clearance gives the ability to take on tough off-road terrain. It is based around a tough, slimline monocoque frame. Power is provided by a motor behind the front wheels, and transmitted to front, center and rear wheels via gears. The gearbox is sealed to protect from dust and debris, and integrated into the frame; it has built-in front, center and rear differential gears that provide superb traction and durability with the use of included diff putty. Double wishbone suspension is fitted with friction dampers, while black 5-spoke wheels are paired with 110mm diameter V-pattern block tires. With suspension reassembly and a separately-sold transmitter with 4WS function and R/C equipment, the rear wheels can be made steerable. ★6-wheel independent double wishbone suspension uses friction dampers. Gearboxes are integrated into the chassis monocoque. ★All 6 wheels are fitted with hub reduction units, which slow down drive shaft output for greater torque and immense traction. ★Diff putty is included in the kit for use in the gear differentials, contributing to superb traction for this big 6-wheeler. ★The G6-01TR is built around a slimline monocque main frame, which provides a sturdy base for the model.     ★Power is provided by a motor behind the front wheels and transmitted to all wheels via a train of gears.     Specifications: ★Length: 428mm, Width: 256mm, Height: 222mm ★Wheelbase: 173mm + 126mm ★Tread: 209mm (Front, Center and Rear) ★Tire Width/Diameter: 50mm/110mm ★Monocoque Frame ★Gear-Driven 6WD ★3-Bevel Differential Gears ★2-Piece Steering Tie-Rod ★6-Wheel Independent Double Wishbone Suspension ★Gear Ratio = 37.35:1 ★Type 540 Motor ★Requires an Electronic Speed Controller (sold separately)

3.695,-

3.995,-

KJØP
-8%
Hovedbilde Tamiya 16039 Harley Davidson FXE1200 Super Glide Hovedbilde Tamiya 16039 Harley Davidson FXE1200 Super Glide
Tamiya 16039 Harley Davidson FXE1200 Super Glide
Art.nr: 16039
Copied
This is the 1/6 Scale Harley-Davidson FXE1200 Super Glide                   from the Big Scale Series from Tamiya.                         Suitable for Ages 14 & Up. FEATURES: Highly detailed plastic pieces molded in blue, black, clear             gray and chrome           Super detailed V-twin engine           Coil sprung working front and rear suspension           Super detailed semi-pheumatic rubber tires           Realistic leather-like seat           Waterslide decals           Illustrated instructions   INCLUDES: One plastic model   REQUIRES: Assembly           Hobby knife            Plastic cement            Sprue cutters            Paint (Mica Blue, Black, White, Blue, Green, Red, Gunmetal,                  Chrome Silver, Gold Leaf, Semi-Gloss Black, Flat Black,                  Flat Aluminum, Metallic Gray)   SPECS:    Scale: 1/6   COMMENTS: Due to small parts that could cause a choking hazard please keep             away from children 3 years of age and younger Detailed 1/6 scale model of the 1975 Harley-Davidson FXE1200 by Tamiya 16039 The Tamiya 16039 kit recreates the 1975 Harley-Davidson FXE1200 Super Glide in 1/6 scale, reflecting the original machine that helped popularise factory choppers. The model emulates the classic shovel head look and the air-cooled V-twin layout with careful attention to proportion. True to the original mechanical layout This assembly kit reproduces the V-twin engine, frame and ancillary components with fine detail. Functional front and rear suspension incorporate coil springs for realistic movement, while wire-spoke wheels and plated trims add period correctness. Semi-pneumatic rubber tyres mimic the original tread pattern. Completing and showing the model Transparent parts are provided for the instrument cluster and a decal sheet supplies authentic markings. The side stand is operational and fitted with a return spring so the model sits naturally when displayed. It is a strong choice for collectors seeking mechanical fidelity. Specifications Scale: 1/6 Construction type: Assembly kit Decals: Included Special features: Detailed V-twin engine, front and rear suspension, semi-pneumatic rubber tyres

3.495,-

KJØP
Hovedbilde Tamiya 42191 TRANSPEED BL MOTOR OCTA 9.5T
Tamiya 42191 TRANSPEED BL MOTOR OCTA 9.5T
Art.nr: 42191
Copied
          Description: These sensored brushless motors are designed for expert R/C drivers and feature an eight-time (OCTA) winding and a 12.5mm magnet design which work together to produce more efficient motor performance. Feature:   These new Transpeed motors feature a totally new design structure, including the fully adjustable and replaceable precision sensor positioning system. Features an all new sintered 12.5mm size magnet graded on a strengthened shaft to further optimize the motors performance. 4.5T and 5.0T motors are equipped with special front cooling covers for improved motor cooling. Specification:   Turns: 9.5T KV: 3800 Power: 298W at 7.2V RPM: 27360 Motor Size: 540         Tamiya 42191 can be used with Touring Cars and Buggy machines.    

2.395,-

2.495,-

KJØP
-4%
Hovedbilde Tamiya 42389 TRF104 Chassis Kit Hovedbilde Tamiya 42389 TRF104 Chassis Kit
Tamiya 42389 TRF104 Chassis Kit
Art.nr: 42389
Copied
TRF104 er et formel 1-chassis med høy spesifikasjon som tar sjangeren til et nytt nivå! Dette høyspesifiserte 2WD-formelchassiset, bygget rundt karbonfiber- og aluminiumchassis-komponenter, med de fremre underarmene laget av karbonfiberplate, gjør det til en formidabel utfordrer på racerbanen! Videre har chassiset oppdatert fjæring foran og bak, pluss en oppdatert layout som er kompatibel med Li-Po-batterier. Info på engelsk. The TRF104 is a high-spec formula one chassis that takes the genre to a new level! This hi-spec 2WD formula chassis, built around carbon fiber and aluminum chassis components, with the front lower arms crafted from carbon fiber plate, makes it a formidable opponent on the racetrack! Furthermore, the chassis features updated front and rear suspension, plus an updated R/C equipment layout which is compatible with Li-Po batteries. Key New Features: Updated front suspension: • Features plastic upper A-arms. • Camber angle is adjustable freely from +1 to -3 degrees (approximate) using a 2mm hex wrench. • Caster angle is also adjustable at 6, 9 and 12 degrees. (approximate). Updated rear suspension: • Suspension link and T-bar setup are not used. Instead, ball connectors are equipped at motor mount front and rear, and suspension roll is placed at the center of the chassis. • The model centering is controlled by roll springs under the rear shaft, and friction grease on roll dampers at motor mount allow adjustment of roll speed. • The pitching is controlled by FRP suspension plate flex and a TRF damper. R/C equipment layout: • Formula chassis can lose rear grip because of unbalanced weight. To prevent this problem, battery pack, receiver and servo are positioned at the center of chassis to ensure better rear grip. Compatible battery packs: • A square-shaped battery holder is included, for Li-Po battery packs to comply with U.S. open-class regulations. Motor mount: • Motor mount has parts for adjustment of ground clearance and wheelbase: 5 types of ground clearances are adjustable in 0.8mm steps and two wheelbases can be chosen with a difference of 2.5mm. Steering servo & steering linkage: • The laid down steering servo is positioned about 30mm backwards compared to the TRF103 chassis and ensures a low center of gravity. • Features a choice of 4 types of steering linkage adjustments over a range of about 1.8mm length by changing Ackerman plate position to keep direct steering. Rear differential unit: • The rear differential unit is the same as the one used for the TRF103 chassis. Lightweight and durable carbon fiber shaft limits weight and ensures compatibility with rubber tires which are relatively heavy. Two rear wing mount options: • A 2mm thick carbon fiber plate is used to attach the rear wing. In this case, the rear wing is connected to the motor mount, and it moves along with rear suspension. • When adding separately sold Item 53596 Aluminum Servo Stays (Short) as wing mount to attach rear wing, rear wing is connected to suspension plate, and it does not move along with rear suspension. (It remains horizontal even if rear suspension moves.) Front suspension arms: • 2.5mm thick carbon fiber front lower suspension arms have two attachment positions (3mm adjustment for each side) to adjust its width and attach wheels with different offsets. • If using separately sold Item 54153 (F103 Carbon Reinforced Front Suspension Arm) and 53119 (RD Special King Pin Set), the width can be changed to the same 200mm width as the TRF 103 chassis. Full ball bearings: • 1060 Sealed Flanged Ball Bearings (New) x2. • 1050 Sealed Ball Bearing 4 pcs. • 1150 Sealed Ball Bearing 1pc. • 1280 Sealed Ball Bearing 1pc. Specifications: • 1/10 scale R/C model assembly kit. Length: 325mm (excluding front and rear wings), width: 169mm (front axle width excluding front and rear wheels), height: 46.5mm (excluding body mount). • Required to complete: 2-channel radio, steering servo, ESC, 540-size motor, 7.2-7.4volt battery with compatible charger, F-1 body parts set, F1 wheels & tires, and Tamiya PS paint.

5.895,-

6.895,-

KJØP
-15%
Hovedbilde Tamiya 46703 X-SA Hornet XB 1:10
Tamiya 46703 X-SA Hornet XB 1:10
Art.nr: 46703
Copied
Another true Tamiya classic joins the new X-SA series in the form of the Hornet, a childhood dream for many early R/C fans and still a highly popular model in the modern day.   TECHNICAL DETAILS: This is a 1/10 scale finished R/C model. Length: 400mm, width: 230mm, height: 150mm. Wheelbase: 251mm. Finished polycarbonate body and wing are pre-painted in black, and have the iconic Hornet livery stickers applied. The chassis comes ready-assembled. Independent swing axle front suspension utilizes friction dampers, while rolling rigid axle rear suspension is fitted with oil filled dampers. Sealed rear gearbox protects diff gear during off-road running. Requires separately sold R/C equipment, battery pack and charger.

2.195,-

2.495,-

KJØP
-12%
Hovedbilde Tamiya 47304 1/10 Fighting Buggy 2014 2WD Kit Hovedbilde Tamiya 47304 1/10 Fighting Buggy 2014 2WD Kit
Tamiya 47304 1/10 Fighting Buggy 2014 2WD Kit
Art.nr: 47304
Copied
This is the Electric Powered, Radio Controlled. 1/10 scale  Fighting Buggy 2014 from Tamiya.     FEATURES  Chassis: FRP (fiber reinforced plastic) 0.098" (2.5mm) thick  Drive: Rear wheel with gear case and direct drive setup  Gear Case: Die cast with transparent plastic cover  Motor: 540 brushed  Body: ABS resin with aluminum roof panel and wing  Steering: Bell crank type  Suspension: Front, independent, double trailing arm, die cast front  rear suspension arms, rear, free floating progressive damping  (FFPDS) with transverse shock and progressive spring  Shock: One rear, aluminum body with separate oil reserve tank  Wheels: Three-piece  Tires: Ribbed front, rear spike  Front Bumper: Reinforced resin with integrated metal bar  Camber: Non-adjustable  Caster: Adjustable, caster/toe-in refers to the angle of the front  suspension when viewed from the side of the car in relation to the  chassis   INCLUDES Fighting Buggy 2014 with Body, Shocks, Brushed Motor, Tires, Wheels,  06 Module 15T Pinion Gear and Instruction Manual   REQUIREMENTS  Radio: 2-channel  Battery: 7.2V stick pack, NOTE chassis was originally set up for a  LF1100 6.6v pack, a 7.2V stick pack can be used by not installing  the K2 rear battery holder  Battery Charger: To match selected battery  Paint: Tamiya TS plastic model paint recommended  Building and track equipment   SPECIFICATIONS Vehicle;  Length: 16.3" (415mm)  Width: 8.7" (220mm)  Height: 6.1" (155mm)  Body;  Length: 14.4" (366mm)  Width: 5.9" (149mm)  Height: 4.2" (108mm)   COMMENTS To paint model to match picture on box, order the following Tamiya  colors; TS-15 Blue  X-2 White  X-7 Red  X-8 Lemon Yellow  X-11 Chrome Silver  XF-1 Flat Black  XF-15 Flat Flesh

3.995,-

4.695,-

KJØP
-15%
Hovedbilde Tamiya 47305 Toyota Land Cruiser 40 Red Painted Body ... Hovedbilde Tamiya 47305 Toyota Land Cruiser 40 Red Painted Body ...
Tamiya 47305 Toyota Land Cruiser 40 Red Painted Body ...
Art.nr: 47305
Copied
The Toyota Land Cruiser 40, a world-famous off-road vehicle that needs little introduction, was produced for almost 25 years and much loved for its durability and adaptability. This version of the vehicle has been given the pick-up truck treatment. It’s mounted on Tamiya’s fun to drive GF01 4WD wheelie chassis. The GF01 chassis plays off the successful and fun line-up of RC kits such as the Wild Willy 2, Volkswagen Type 2 and the Farm King Wheelie. Whereas those kits featured a 2WD and easy to wheelie platform, the GF01 is a 4WD incarnation with the motor directly placed in the center in order to drive the gears in the front and rear gearboxes. What makes this version of the Toyota Land Cruiser 40 Pick Up unique is the inclusion of a pre-painted body set to accelerate the building process.   Feature:   Scale : 1/12 Construction Type : Assembly kit Terrain Use : Multi-Purpose Drive-train : 4WD Drive Type : Gearbox Drive Line : Dog bone Differential type : Gear Suspension : Fully independent double wishbone Steering mechanism : Bell-crank Shock damper : Friction damper Shock Damper Material: Plastic Tire Type: Rubber Tire tread : Block-pattern Body material : Polycarbonate Chassis material : Plastic ESC: Included ESC model: TBLE-02S LED Light buckets: No LED lights: No Motor : 540-brushed type Bearings : Plastic bushing Adjustable camber: Fixed Adjustable toe angles : Front only Adjustable ground clearance : Yes Adjustable gear ratio : Yes Adjustable wheelbase : Fixed Adjustable track width: Fixed Adjustable shock angle: Fixed Special feature 1 : The polycarbonate body accurately recreates the form of the Land Cruiser 40 with pick-up style rear end. Comes Pre-Painted in RED. Special feature 2 : The 4WD GF01 chassis provides an excellent feeling of big scale, and uses front and rear differentials in a sealed gearbox integrated in the frame. Special feature 3 : 4-wheel double wishbone suspension utilizes friction dampers. Special feature 4 : 5-spoke wheels are fitted with massive 110mm-diameter tires. Special feature 5 : A driver figure is included. Special feature 6 : Includes Tamiya TBLE-02S ESC (capable of running brushed and brushless motors) Special feature 7 : Includes 540 Torque Tuned motor.   Specification:   Length: 333mm Width: 244mm Height:242mm   Include:   Tamiya 1/12 GF01 Red Painted Body w/ESC EP For Toyota Land Cruiser 40 Pick Up (1 Set) Motor: 540-brushed type (1 Pc) ESC Model: TBLE-02S (1 Pc) Red Painted Body (1 Pc) Wheel (4 Pcs) Tires (4 Pcs)   Required: 7.2 battery & charger 2-channel radio gear Servo AA batteries PS Spray Tools

2.795,-

2.995,-

KJØP
-7%
Hovedbilde Tamiya 47308 GOLF RACING GR.2 (M-05) KAMEI — NO ... Hovedbilde Tamiya 47308 GOLF RACING GR.2 (M-05) KAMEI — NO ...
Tamiya 47308 GOLF RACING GR.2 (M-05) KAMEI — NO ...
Art.nr: 47308
Copied
Tamiya 47308 GOLF RACING GR.2 (M-05) KAMEI NO ESC   Volkswagen Golf Mk.1 Racing Group 2 byggesett. Racing utgave av førstegenerasjons golf fra 70-tallet. Dekaler til karosseriet medfølger. 540 motor medfølger. Må kompletteres med: Radio og mottaker 4.8 ~ 7.4kg servo eller sterkere NiMH eller LiPO batteri ESC (fartskontroller) Batterilader PS lakk Anbefales: Tamiya kulelagre Yeah Racing kulelagre Anbefalte farger: PS-1 White PS-6 Yellow PS-7 Orange PS-31 Smoke PS-34 Bright Red TS-12 Oranger TS-16 Yellow TS-26 Pure White TS-29 Semi Gloss Black TS-49 Bright Red   Fra produsenten: Length: 329mm. Image shows assembled and painted kit. The Comeback of a Classic! This R/C model assembly kit depicts the striking Kamei-sponsored Group 2 VW Golf which made a splash in 1970s touring car racing. The polycarbonate body accurately captures the form of the racing Golf, with wide front fenders and a sporty front spoiler. Stickers are included to recreate sponsor logos, numbers, etc.   M-05: Low Center of Gravity, High Performance! The front wheel drive M-05 chassis features a lightweight, narrow, durable, and　easy-assembly semi-monocoque resin frame. Gearbox, motor, battery pack, receiver, servo and ESC are positioned for optimum weight distribution and a low center of gravity. Ground-hugging 4-wheel independent double wishbone suspension and the 3-piece steering linkage provide stable high-speed cornering. Racing slick tires feature tire inserts.   Specifications ●Length: 329mm, Width: 175mm, Height: 120mm ●Wheelbase: 210mm　●Tread (Front & Rear): 138mm ●Tire Width/Diameter (Front & Rear): 25/55mm ●Monocoque Frame ●3-Bevel Differential Gear ●Front-Wheel 2WD ●3-Piece Steering Tie-Rod ●4-Wheel Double Wishbone Suspension ●Front & Rear Friction Dampers ●Gear Ratio = 5.8:1 ●Type 540 Motor ●Requires an Electronic Speed Controller (sold separately)   Separately Required Items ●2-Channel R/C System w/ESC ●R6/AA/UM3 batteries for transmitter ●Battery Pack & Charger

1.495,-

1.595,-

KJØP
-6%
Hovedbilde Tamiya 47326 1/10 TT-02R Chassis Kit Hovedbilde Tamiya 47326 1/10 TT-02R Chassis Kit
Tamiya 47326 1/10 TT-02R Chassis Kit
Art.nr: 47326
Copied
This is the 1/10 scale, electric powered, radio controlled, Tamiya TT02R On-Road Chassis Kit. The following Hop Up Option Parts are included; 53159 4mm Aluminum Flange Lock Nut (Blue) 54247 3x18mm Aluminum Turnbuckle Shaft (Blue) x2 54501 TT-02 Aluminum Propeller Shaft 53642 5mm Aluminum Ball Connector (Blue) 54500 TT-02 High-Speed Gear Set (68T) 54502 TT-02 Aluminum Propeller Joint Take the TT-02 Racing!! This variant of the efficient 4WD TT-02 chassis includes a range of option parts, allowing you to compete at the front of the race! Aluminum rear uprights give 3-degree toe-in for more stable cornering, while an aluminum motor mount makes for greater rigidity and enhanced heat dissipation. A highly reliable drivetrain employs full ball bearings, aluminum propeller shaft and center cups, plus metal drive shafts and joint cups. Suspension is fitted with CVA oil dampers and black coil springs; they provide superior cushioning and improved traction. The kit also includes a TT-02 high speed gear set (68T). FEATURES Chassis: ABS resin bathtub type minimizes contact with the road Drive: Four wheel, aluminum shaft driven Motor Mount: Aluminum Differential: Gear type Wheels: Ten spoke, black in color Tires: Slick rubber with foam inserts Ball Bearings: Shielded Suspension: Fully independent double wishbone Shocks: CVA oil-filled Camber: Non-adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis, newly-designed aluminum uprights provide 3 degrees of toe-in for better stability when cornering Steering: Bellcrank type Bumper: Front, urethane INCLUDES Tamiya TT0R Chassis, with Tires, Wheels, Shocks, Decals and Instructions REQUIREMENTS Radio: 2-channel with high speed steering servo Motor: Tamiya Super Stock brushed motor recommended Electronic Speed Control: To match selected motor Battery: 7.2V NiMH Battery Charger: To match selected battery Body: 1/10 scale on-road Paint, building and track equipment SPECIFICATIONS Length: 14.8" (376mm) Width: 7.2" (182mm) Wheelbase: 10.1" (257mm)

1.995,-

2.395,-

KJØP
-17%
Hovedbilde Tamiya 47329 1/24 Metal Dump Truck GF-01 4WD Limited ... Hovedbilde Tamiya 47329 1/24 Metal Dump Truck GF-01 4WD Limited ...
Tamiya 47329 1/24 Metal Dump Truck GF-01 4WD Limited ...
Art.nr: 47329
Copied
This is the Electric Powered, Radio Controlled 1/24 scale Limited Edition Heavy Dump Truck Kit from Tamiya. **Body parts are molded in black, with metal-plated chassis** **parts and new sticker designs.** FEATURES Chassis: GF-01 lightweight monocoque resin with wheelie bar to prevent flipping over backward during wheelies Drive: 4 wheel, dogbone driveline Motor: Tamiya Sport Tuned RS-540 brushed, center mounted Electronic Speed Control: TBLE-02 Differentials: Bevel gear type Gearboxes: Sealed Cab and Rear Bed: ABS plastic, black in color, bed may be displayed in flat or raised position by changing the position of the two stays and snap pins in the body mounts. It is not advisable to put objects in the rear bed, or drive the model with the bed elevated **bed is not remote controlled** Front Bumper: Spring loaded Shocks: Plastic body friction, not oil-filled Suspension: Four wheel independent double wishbone Tires: Rubber, lug and pin spike 2.5" (65mm) wide, 4.5" (115mm)diameter Wheels: Metal plated plastic 1.9" (49mm) diameter, 2.3" (58.5mm)wide, 12mm hex Steering: Bell crank type Camber: Non-adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle Steering Tie Rods: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis INCLUDES Heavy Dump Truck Kit with Brushed Motor, ESC, Shocks, Decal Sheet, Tires, Wheels, 18T Pinion Gear and Instruction Manual REQUIREMENTS Radio: 2-channel with high-torque steering servo Battery: 7.2V NiMH battery with Standard connector Charger: To match selected battery AA Cells: For transmitter Building and Track Equipment SPECIFICATIONS Length: 13.8" (350mm) Width: 10.6" (270mm) Height: 8.3" (210mm) Wheelbase: 6.8" (174mm) Tread: 7.6" (194mm) distance between center of tires measured side-to-side

2.495,-

2.795,-

KJØP
-11%
Hovedbilde Tamiya 47350 1/10 Top Force 2017 4WD Buggy Kit Hovedbilde Tamiya 47350 1/10 Top Force 2017 4WD Buggy Kit
Tamiya 47350 1/10 Top Force 2017 4WD Buggy Kit
Art.nr: 47350
Copied
The purebred racer, redefined! The 1/10, electric Top Force 2017 4WD Kit reimagines the classic buggy that's been popular since 1991, adding square spike tires for superior traction! Other highlights include a Fiberglass-Reinforced Plastic (FRP) double-deck chassis, a powerful 540 motor with rear transverse mount, a polystyrene resin body, driver figure and white nylon wheels. Fiberglass Reinforced Plastic (FRP) double-deck chassis. Four-wheel shaft drive. 540-size motor with rear transverse mount. Polystyrene resin body with rear wing, marking decals and driver figure. Plastic oil CVA shocks. Fiberglass Reinforced Plastic shock damper stays. Fully independent double wishbone suspension. Bellcrank steering. Front/rear ball differentials with a rigid propeller shaft. Square spike tires with rubber construction. White nylon wheels. Adjustable toe-in/camber. Shielded ball bearings. This is the 1/10 scale, Electric Powered, Radio Controlled, Top Force 2017 Offroad Buggy Kit from Tamiya.     FEATURES Chassis: 0.078" (2mm) thick fiberglass Drive: Four wheel shaft drive Differentials: Ball type Motor: 540 size brush equipped, rear transverse mount Ball Bearings: Shielded for long life Shocks: Plastic body oil filled CVA type Gearboxes: Sealed Differential: Gear type Body: Molded from clear polycarbonate Tires: Square spike rubber construction Wheels: One-piece nylon construction, white in color 2.2" (56mm) diameter, front 0.93" (23.7mm) wide, rear 1.1" (29mm) wide 12mm hex Suspension: Fully independent double wishbone Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle Caster: Adjustable front only, caster/toe-in refers to the angle of the suspension when viewed from the side of the car in relation to the chassis Steering: Ball bearing equipped bell crank type     INCLUDES Top Force rolling chassis with oil-filled shocks, 540 motor, clear polycarbonate body, decals, wheels, tires, 21 tooth pinion gear spur gear and instructions _   REQUIREMENTS Radio: 2-channel with high-torque steering servo Radio Batteries: AA size ESC: Compatible with included 540 brushed motor Battery: 6-cell flat w/standard connector Charger: AC/DC timed or peak for 6-cell battery Building and track equipment     SPECIFICATIONS Vehicle; Length: 15.7" (400mm) Width: 9.8" (249mm) Height: 7.4" (187mm) Weight: 2.7lbs (1240g) approximately Tires: Front, width 1.2" (31.5mm), diameter 3.1" (80mm) Rear, width 1.6" (40mm) diameter 3.1" (80mm) Body; Length: 11.3" (287mm) Width: 6.2" (158mm) at widest point Height: 3.1" (79mm)

2.795,-

2.995,-

KJØP
-7%
Hovedbilde Tamiya 47370 1/10 Isuzu mu Type X CC-01 4WD Kit
Tamiya 47370 1/10 Isuzu mu Type X CC-01 4WD Kit
Art.nr: 47370
Copied
True Isuzu realism. The 1/10, electric Isuzu Mu Type X 4WD Kit is a blast to drive, on- or off-road! Features include a tough, all-terrain chassis, a powerful 540 motor, an ESC, an injection-molded plastic body, bellcrank steering and much, much more: CC-01 plastic tub chassis. Four-wheel shaft drive. 540 brushed motor. ESC. Injection-molded plastic body. Oil-filled CVAs. Double wishbone suspension with front upper single links and lower H-shaped arms, plus a rigid rear suspension. Bellcrank steering with servo saver and adjustable linkage. Single-speed transmission. Front/rear sealed gearboxes. Planetary gear differentials.  Rear diff may be locked during assembly. Fixed, non-adjustable camber tie rods. Adjustable toe-in/caster. Black plastic front bumper. 1.1" (29 mm) wide, 3.5" (90 mm) diameter semi-pneumatic all-terrain rubber tires. Plastic six-spoke wheels. This is the 1/10 scale electric powered, radio controlled, 4WD Isuzu Mu Type X Off-Road Kit from Tamiya.   FEATURES Chassis: CC-01, plastic tub construction Drive: Four wheel, shaft driven Differentials: Planetary gear, rear differential may be locked during assembly Motor: Brush equipped 540 electric motor Shocks: Oil-filled, CVA Gearbox: Front and rear sealed gearbox Differentials: Planetary gear, rear differential may be locked during assembly Transmission: Single speed Body: Injection molded plastic Tires: Semi-pneumatic all-terrain, rubber construction 1.1" (29mm) wide, 3.5" (90mm) diameter Wheels: Plastic, six spoke design Front Bumper: Plastic construction, black in color Suspension: Double-wishbone front upper single links and lower H-shaped arms, rigid rear suspension Camber Tie Rods: Fixed non-adjustable Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis Steering: Bell-crank type with servo saver and adjustable linkage   INCLUDES Tamiya Isuzu Mu Type X kit with oil-filled shocks, 540 motor, ESC, injection molded body, tires, wheels, shock oil, 16 tooth pinion gear, spur gear, instructions   REQUIREMENTS Radio: 2-Channel with high-torque steering servo AA Batteries: For transmitter Battery: 6-cell stick pack w/ standard connector Charger: AC/DC timed or peak for 6-cell battery Misc. Items: Building and track equipment   SPECIFICATIONS VEHICLE -Length: 16.8" (426mm) Width: 7.7" (195mm) Height: 8.5" (215mm) Weight: 53.3oz (1510g) Wheelbase: 9.9" (252mm)

2.895,-

3.195,-

KJØP
-9%
Hovedbilde Tamiya 47372 1/10 Subaru Impreza Petter Solberg Mexico ... Hovedbilde Tamiya 47372 1/10 Subaru Impreza Petter Solberg Mexico ...
Tamiya 47372 1/10 Subaru Impreza Petter Solberg Mexico ...
Art.nr: 47372
Copied
Subaru Impreza som Petter Solberg kjørt i Mexico 2004. Modellen er konstruert på TT-01E chassiset med firehjulsdrift og er designet for enkel montering og vedlikehold. Bodyen er i høyholdbart polykarbonat material og modellen leveres med en kraftig børstemotor og fartsregulator. Behøves utenom som ikke er inkludert: 2-kanals fjernkontroll og mottaker 7.2V Ni-Mh batteripakke og lader Styreservo Lakk/maling til bodyen Spesifikasjoner: RC bygggesett Lengde: 44,5 cm Chassis type: TT-01 Type-E Skala: 1/10 Lengde: 44,1cm Bredde: 18,5 cm Høyde: 13,7 cm Terreng: On-road  Drift: 4WD  Fartsregulator  ESC (inkludert) Batteripakke: 7,2V Ni-Mh med Tamiya-kontakt (ikke inkludert) Motor: RS-540 Børstemotor (inkludert) Forseglet differensial Body: Gjennomsiktig polykarbonat (lakk/maling ikke inkludert) Informasjon fra Tamiya: A Classic Returns! Subaru were once again a force to be reckoned with on the 2004 rally circuit, their Impreza taking 5 wins in the capable hands of Petter Solberg. This assembly kit creates an R/C model of the Impreza which took part in the third race, in Mexico. A durable polycarbonate body recreates the distinctive form of the car, with separate molded parts for the side mirrors and rear wing. Stickers are included in the kit to depict the numerous markings on the car. Evolved Chassis The bathtub frame of the evolved shaft-driven 4WD TT-01 Type-E has its motor and battery close to the ground for lower center of gravity and optimum balance. Mounted on the bathtub frame is a fiberglass reinforced nylon upper deck and gear covers improving rigidity, as well as a 3-piece tie rod providing smooth steering action. The low center of gravity, highly balanced design, 4 wheel double wishbone suspension system, and front and rear differential gears all come together to produce an excellent drive. Gold color dish wheels are paired with treaded tires for the finishing touch, while a host of Hop-Up Option parts are available to soup up the TT-01 Type-E! Specifications ★Length:441mm, Width: 185mm, Height: 137mm  ★Wheelbase: 257mm  ★Tire Width/Diameter: 27/67mm  ★Bathtub Type Chassis Frame  ★Longitudinally-Mounted Motor Shaft-Driven Full-Time 4WD  ★F/R 3-Bevel Differentials  ★3-Piece Steering Tie-Rod  ★4-Wheel Double Wishbone Suspension  ★F/R Friction Dampers  ★Gear Ratio=8.35:1  ★Type 540 Motor  Separately Required Items ★2-channel R/C system ★Battery pack and charger ★Batteries for transmitter

1.995,-

2.195,-

KJØP
-9%
Hovedbilde Tamiya 47372 Subaru Impreza Petter Solberg Mexico 2004 ... Hovedbilde Tamiya 47372 Subaru Impreza Petter Solberg Mexico 2004 ...
Tamiya 47372 Subaru Impreza Petter Solberg Mexico 2004 ...
Art.nr: 47372 uten esc
Copied
Subaru Impreza som Petter Solberg kjørt i Mexico 2004. Modellen er konstruert på TT-01E chassiset med firehjulsdrift og er designet for enkel montering og vedlikehold. Bodyen er i høyholdbart polykarbonat material og modellen leveres med en kraftig børstemotor og fartsregulator. Behøves utenom som ikke er inkludert: 2-kanals fjernkontroll og mottaker og esc 7.2V Ni-Mh batteripakke og lader Styreservo Lakk/maling til bodyen Spesifikasjoner: RC bygggesett Lengde: 44,5 cm Chassis type: TT-01 Type-E Skala: 1/10 Lengde: 44,1cm Bredde: 18,5 cm Høyde: 13,7 cm Terreng: On-road  Drift: 4WD  Fartsregulator  ESC (ikke inkludert) Batteripakke: 7,2V Ni-Mh med Tamiya-kontakt (ikke inkludert) Motor: RS-540 Børstemotor (inkludert) Forseglet differensial Body: Gjennomsiktig polykarbonat (lakk/maling ikke inkludert) Informasjon fra Tamiya: A Classic Returns! Subaru were once again a force to be reckoned with on the 2004 rally circuit, their Impreza taking 5 wins in the capable hands of Petter Solberg. This assembly kit creates an R/C model of the Impreza which took part in the third race, in Mexico. A durable polycarbonate body recreates the distinctive form of the car, with separate molded parts for the side mirrors and rear wing. Stickers are included in the kit to depict the numerous markings on the car. Evolved Chassis The bathtub frame of the evolved shaft-driven 4WD TT-01 Type-E has its motor and battery close to the ground for lower center of gravity and optimum balance. Mounted on the bathtub frame is a fiberglass reinforced nylon upper deck and gear covers improving rigidity, as well as a 3-piece tie rod providing smooth steering action. The low center of gravity, highly balanced design, 4 wheel double wishbone suspension system, and front and rear differential gears all come together to produce an excellent drive. Gold color dish wheels are paired with treaded tires for the finishing touch, while a host of Hop-Up Option parts are available to soup up the TT-01 Type-E! Specifications ★Length:441mm, Width: 185mm, Height: 137mm  ★Wheelbase: 257mm  ★Tire Width/Diameter: 27/67mm  ★Bathtub Type Chassis Frame  ★Longitudinally-Mounted Motor Shaft-Driven Full-Time 4WD  ★F/R 3-Bevel Differentials  ★3-Piece Steering Tie-Rod  ★4-Wheel Double Wishbone Suspension  ★F/R Friction Dampers  ★Gear Ratio=8.35:1  ★Type 540 Motor  Separately Required Items ★2-channel R/C system ★Battery pack and charger ★Batteries for transmitter

1.695,-

2.095,-

KJØP
-19%
Hovedbilde Tamiya 47376 1/18 King Yellow 6x6 Painted Hovedbilde Tamiya 47376 1/18 King Yellow 6x6 Painted
Tamiya 47376 1/18 King Yellow 6x6 Painted
Art.nr: 47376
Copied
Ready to pound dirt! The King Yellow is a 6x6 six-wheeled School Bus themed R/C vehicle ready to pound dirt, asphalt lots and neighborhood streets across the country! The model utilizes a gear-driven 6WD chassis which is partially derived from the capable Tamiya GF-01 wheelie machine. The exceptional drive it provides make for extreme fun while off-road driving. Furthermore, its powerful gear-driven setup allows the King Yellow to take on slope inclines of up to 40 degrees!This LIMITED-EDITION version of the kit includes a pre-painted yellow polycarbonate body!  The fun G6-01 chassis is based around a tough, slimline monocoque frame and offers excellent off-road performance thanks to a 6-wheel drive system. Power is provided by a motor behind the front wheels, and transmitted to front, center and rear wheels via gears. The gearbox is sealed to protect from dust and debris and integrated into the frame; it has built-in front, center and rear differential gears to provide smooth cornering. 6-wheel double wishbone suspension is fitted with friction dampers. A 2-piece steering tie-rod setup utilizes the servo on the left for excellent response. With suspension reassembly and a separately-sold transmitter with 4WS function and R/C equipment, the rear wheels can be made steerable. 1/18 scale R/C model assembly kit. Length: 478mm. Body is pre-painted in PS-19 Camel yellow, and requires attachment of accessories, application of stickers, and opening of body holes. The G6-01 chassis gives powerful 6-wheel drive in a gear powered drivetrain contained in a gearbox in the tough, slimline monocoque. 3 differential gears are built-in. 6-wheel double wishbone suspension is fitted with friction dampers.  Matte plated deep rim wheels are paired with 113mm tires. 540-Brushed Type Motor included. With suspension re-assembly and a separately-sold transmitter with 4WS function and R/C equipment, rear wheels can be made steerable (4-wheel steering).  This is the Tamiya 1/18 scale Radio Controlled, Electric Powered King Yellow 6x6 Off-Road School Bus Kit. FEATURES Chassis: G6-01 plastic monocoque Drive: Six wheel gear driven, sealed gearbox, front, center and rear diff gears for smooth cornering Motor: 540 brush equipped, front-center mounted Body: Molded polycarbonate, pre-painted in Tamiya PS-19 Camel Yellow Suspension: Six wheel double wishbone Shocks: Friction, not oil-filled Steering: Two-piece steering tie rod, steering servo mounted on left of chassis, rear wheels can be made steerable with reassembly of suspension and separately sold 4WS function transmitter (not included) Wheels: Matte silver finish plastic, 2.1" (53mm) wide, 1.9" (48.9mm) diameter Tires: Rubber off-road V-shaped tread 2.6" (67mm) wide, 4.4" (113mm) diameter Front Bumper: Spring loaded INCLUDES 1/18 scale King Yellow 6x6 School Bus Kit, Clear Body, 540 size Motor Decals, Tires, Wheels, 18T Pinion Gear and Instruction Manual REQUIREMENTS Radio: 2-channel with high-torque steering servo ESC: Tamiya TEU-302BK recommended Battery: 7.2V 6-cell stick pack with Standard connector Battery Charger: Compatible with selected battery Polycarbonate safe spray or brush-on paint Building and track equipment SPECIFICATIONS Vehicle; Length: 18.8" (478mm) Width: 10.6" (270mm) Height: 9.4" (239mm) Wheelbase: 6.8 + 4.9" (173 + 126mm) Body; Length: 17.7" (450mm) Width: 5.6" (142mm) Height: 5.3" (135mm)

2.995,-

3.395,-

KJØP
-12%
Hovedbilde Tamiya 47381 SUPER ASTUTE (2018) Hovedbilde Tamiya 47381 SUPER ASTUTE (2018)
Tamiya 47381 SUPER ASTUTE (2018)
Art.nr: 47381
Copied
This is a Limited-Edition Re-Release of the Super Astute 2WD off-road buggy. The original radio control kit was released back in 1991. The basic construction and design of the model remains true to the original, with various minor upgrades. Super fun off-road driving awaits with this high-performance 2WD buggy’s rugged chassis, durable suspension and TTC (Tamiya Traction Control system). • 1/10 scale 2WD R/C model assembly kit. • 2.5mm thickness FRP chassis gives a low center of gravity for excellent balance. • The battery pack position has been slightly enlarged. Note: This kit is not compatible with square-shaped battery packs. Rounded profile battery packs must be used. • 4-wheel double wishbone suspension employs CVA oil dampers. • Sealed gearbox features TTC, which was Tamiya’s first slipper clutch and protects gears from impacts and gives stable drive by limiting wheelspin. Externally the same as on the original, it features a modernized internal design, and can be adjusted simply by removing the gearbox cover and turning the lock nut. • Efficient 0.5 module gear included. • A low-profile servo is required for this model. • High-traction front rib-spike and rear square spike tires provide superb response and awesome cornering. • Comes with durable and lightweight polycarbonate body and rear wing, plus a protective under cowl. • Requires: 2-Channel Radio, low profile servo, motor, ESC (electronic speed control) 7.2volt battery pack & charger, and Tamiya PS paint.

4.195,-

4.395,-

KJØP
-5%
Hovedbilde Tamiya 47383 Isuzu MU Type X BM (CC-01) Hovedbilde Tamiya 47383 Isuzu MU Type X BM (CC-01)
Tamiya 47383 Isuzu MU Type X BM (CC-01)
Art.nr: 47383
Copied
Tamiya RC ISUZU MU TYPE X Cc01 Black Metallic This is a special edition of our classic R/C model assembly kit of Isuzu’s mu SUV, a car first announced by the Japanese manufacturer in 1989 and then powered up in December 1994 with the release of the Type X, which featured a punchy 3.1-liter diesel turbo engine. The 2-door hatchback body is recreated by a ABS molded body with superb detail across the board, and – along with bumpers, side steps and side mirrors – given an ultra-cool black-plated finish. LEDs are included for use in headlights, while other black-plated parts are included for wheels, underguard and rear axle housing. The All-Terrain CC-01 Chassis The CC-01’s highly reliable and efficient full-time 4WD system features a longitudinally-positioned motor, which transmits power to the front wheels via the gearbox and to the rear wheels via propeller shaft with universal joints. Front and rear differentials enable smooth cornering, and for even greater off-road performance on rough terrain, the rear differential may be locked during assembly. The chassis suspension employs double-wishbone front upper single links and lower H-shaped arms plus rear rigid suspension. With 4 CVA oil dampers in total fitted to the front and rear, there’s enough cushion to take on even the roughest surfaces. Specifications: Length: 462mm Width: 195mm Height: 182mm Wheelbase: 242mm Tread (Front & Rear): 154mm Tire Width/Diameter (Front & Rear): 33/90mm Ladder Frame Bathtub Type Chassis Shaft-Driven Full-Time 4WD Front and Rear 3-Bevel Differential Gears Front Suspension: Double Wishbone Rear Suspension: 4-Link Rigid Front and Rear CVA Oil Dampers Gear Ratio = 14.67:1 Requires an Electronic Speed Controller (sold separately) Type 540 Motor included Required: 2-Channel R/C System  R6/AA/UM3 batteries for transmitter Battery Pack & Charger Specifications: Adjustable Gear Ratio Yes Bearings Plastic Bushings Body Material ABS Plastic Body Stickers Included & Need to be Applied Chassis Material ABS Plastic Chassis Type CC-01 Construction Type Assembly Kit Differential Type Gear-Type Discontinued True Drive Type 4WD Electronic Speed Control (esc) Includes Tamiya TBLE-02S ESC (electronic speed control) Capable of running sensor brushless motors and brushed motors alike. (21.5 Turn BL motor limit) (23 Turn brushed motor limit) Motor 540-brushed type Requires A Requires: 2-channel radio, steering servo, 7.2volt battery pack with compatible charger to complete. Scale 1/10 Shock Damper CVA Oil-filled Damper Suspension Front Double Wishbone, Rear 4-link Rigid Suspension Terrain Use Multi-Terrain

3.595,-

3.995,-

KJØP
-10%
Hovedbilde Tamiya 47390 - 1/10 RC Avante (2011) Black Special Hovedbilde Tamiya 47390 - 1/10 RC Avante (2011) Black Special
Tamiya 47390 - 1/10 RC Avante (2011) Black Special
Art.nr: 47390
Copied
TAMIYA RC AVANTE 2011 BLACK SPECIAL This is a Limited-Edition Black Special release of the Avante 2011 edition, which was originally released to commemorate the 35th anniversary of Tamiya R/C car products. It sports a color scheme inspired by its Mini 4WD cousin the Avante Black Special. About the Avante: The machine features a unique shaft-driven 4WD system which was taken from Tamiya’s first 4WD R/C buggy, the Hotshot. It features a highly sophisticated design including an FRP double-deck chassis layout, longitudinal motor & battery positions, and a formula-type body with chassis fairing. It is equipped with innovative components such as a compact gearbox with 3 small planetary gears, a center diff to increase stability, a fully adjustable suspension, and cam-lock wheel caps. The modern specification of the car has a few updates, such as universal drive-shafts and machined aluminum uprights, which gives this version increased durability and performance over the original. • 1/10 scale R/C shaft-driven 4WD buggy assembly kit. Length: 420mm, width: 240mm, height: 140mm. Wheelbase: 260mm. • Carbon-fiber parts such as 2mm thickness upper & lower decks, plus rear damper stay offer superb strength. • Includes Avante (2011) Racing Steering Set, with a 2mm thickness carbon fiber steering plate and 850 ball bearings giving silky smooth motion. • Includes Avante (2011) Torque Splitter Set, with torque splitter and ball differentials for sure-footed traction. • 4-wheel double wishbone suspension has metal shafts for great customizability. • Aluminum front uprights. • Spike tires are mounted on fluorescent pink wheels. • Comes with a 25-Turn motor featuring a special label.  Requires: 2-Channel Radio servo ESC (electronic speed control) 7.2volt battery pack & charger Tamiya PS paint. Specs: Adjustable Gear Ratio Yes Bearings Includes full ball bearings Body Material Polycarbonate Body Stickers Included Chassis Material Carbon fiber plate Construction Type Assembly Kit Differential Type Gear Drive Type 4WD Motor Brushed 540 Type Required To Complete Requires: 2-Channel Radio, servo, ESC (electronic speed control) 7.2volt battery pack & charger, and Tamiya PS paint. Scale 1/10 Shock Damper Oil-filled damper Suspension 4-wheel fully independent double wishbone Terrain Use Off-Road

5.995,-

6.595,-

KJØP
-9%
Hovedbilde Tamiya 47394 Toyota Mountain Rider Hovedbilde Tamiya 47394 Toyota Mountain Rider
Tamiya 47394 Toyota Mountain Rider
Art.nr: 47394
Copied
RC TOYOTA MOUNTAIN RIDER    DESCRIPTION This rip-roaring R/C model assembly kit recreates the Toyota Hilux, a pick-up truck which has enjoyed enduring popularity in the U.S., Japan and beyond. The model employs a ladder frame like that on the actual car, and is powered by a 3-speed transmission that offers 4WD (1st gear) and 2WD (2nd and 3rd gears) and allows gear changing while running. The realism doesn't stop there, with the sturdy suspension featuring metal axle housings, leaf springs and shackles, while the rear setup is fitted with a radius rod. A metal front under guard helps the model take on tough off-road conditions. The detailed and durable injection-molded body with roll bar is married to metal-plated wheels on 123mm diameter tires to give the model a stylish, high-lift appearance.  About the Toyota Truck  The Toyota Hilux has enjoyed sustained popularity in Japan and across the world since the first model's debut in 1968. The 3rd generation 30/40 Series appeared in 1978, with the RN36 model developed for export markets. It featured a sporty, lightweight body and was powered by a 98hp 1,968cc 4-cylinder gasoline engine. Furthermore, its live axle suspension featured front leaf spring shackles located toward the rear to provide a sufficient approach angle for superb off-road performance. Front/rear flared fenders and large tires gave the truck a tall, aggressive stance, the look complemented by the chunky front grille and dual rounded headlights. The RN36 was mainly exported to North America, but was also later sold in Japan and there are still many fans of this pick-up to this day.  • 1/10 scale R/C model assembly kit. Length: 525mm, width: 278mm, height: 275mm. Tread: 200mm (front)/218mm (rear). Wheelbase: 287mm.  • Features a realistic injection molded body with roll bar.  • The chassis is based around a ladder frame like that of the actual car, and is powered by a 3-speed transmission with 4WD (1st gear) and 2WD (2nd and 3rd gears), employing a universal drive shaft.  • Sturdy suspension features metal axle housings, leaf springs and shackles, while the rear setup is fitted with a radius rod.  • Differentials in die cast axle housings front and rear make for smooth turns.  • Front & rear large diameter tires are paired with stylish plated wheels.  • Includes 540-brushed type motor.  • Separately available LEDs can be installed in the light cases to depict realistic head and tail lights.  • Requires: 4-channel Tamiya Attack radio, steering servo, ESC, 7.2volt battery pack with compatible charger, and Tamiya TS and acrylic paints to complete.

KONTAKT
Hovedbilde Tamiya 47414 Audi A4 Quattro Touring TT-01E inkl ESC Hovedbilde Tamiya 47414 Audi A4 Quattro Touring TT-01E inkl ESC
Tamiya 47414 Audi A4 Quattro Touring TT-01E inkl ESC
Art.nr: 47414
Copied
Klassisk Audi A4 Quattro Touring racerbil fra 1997. Modellen er konstruert på TT-01E chassiset med firehjulsdrift og er designet for enkel montering og vedlikehold. Bodyen er i høyholdbart polykarbonat material og modellen leveres med en kraftig børstemotor og fartsregulator. Behøves utenom som ikke er inkludert: 2-kanals fjernkontroll og mottaker 7.2V Ni-Mh batteripakke og lader Styreservo Hurtiglim Lakk/maling til bodyen Spesifikasjoner: RC bygggesett Lengde: 45,4 cm Chassis type: TT-01E Skala: 1/10 Terreng: On-road  Drift: 4WD  Fartsregulator TBLE-02S ESC (inkludert) Batteripakke: 7,2V Ni-Mh med Tamiya-kontakt (ikke inkludert) Motor: Type 540 Børstemotor (inkludert) Forseglet differensial Body: Gjennomsiktig polykarbonat (lakk/maling ikke inkludert) Lakk/maling anbefalt av Tamiya: PS-5 Black PS-12 Silver PS-31 Smoke TS-17 Gloss Aluminum TS-47 Chrome Yellow X-18 Semi Gloss Black Informasjon fra Tamiya: This Tamiya R/C car recreates a classic Audi A4 Quattro Touring car as it raced in 1997. In the late 1990s, manufacturer-backed teams would come to dominate touring car series around the world. One of the most pre-eminent was Audi, which spared no expense in its pursuit of the top of the podium. Using its base A4 quattro as a platform, Audi developed the car significantly and turned it into a race winner. In addition, Audi sought the best drivers from around the world in order to do their creation justice.  Tamiya recreates this racer on top of the TT-01 E chassis, which is ideal for beginner kit builders. The original release of this Audi was mounted on the Tamiya TA-03 machine.  TT-01 E Chassis  The bathtub frame of the evolved shaft-driven 4WD TT-01 Type-E has its motor and battery close to the ground for lower center of gravity and optimum balance. Mounted on the bathtub frame is a fiberglass reinforced nylon upper deck and gear covers improving rigidity, as well as a 3-piece tie rod providing a smoother steering action. The low center of gravity, great balanced design, 4-wheel double wishbone suspension system, and front and rear differential gears all come together to produce excellent operating ability. 70mm-diameter radial tires are paired with metal plated wheels developed just for this model; the high sidewalls make for forgiving turns.  • 1/10 scale R/C model assembly kit. Length: 454mm, width: 186mm.  • Polycarbonate body.  • Separate molded parts recreate side mirrors and sporty rear wing.  • Stickers are included to recreate markings for both no.5 and no.45 cars (they raced in different touring car series), with masking stickers to help during the paint job.  • 18-spoke wheels are molded in Silver, and paired with slick tires.  • The TT-01 Type-E chassis features shaft-driven 4WD for easy handling, and great customizability.  • A wide range of option parts is available to tune the TT-01 Type-E chassis.  • Requires: 2-channel radio, servo, 7.2-7.4volt battery & compatible battery charger, and Tamiya PS paint

1.795,-

1.995,-

KJØP
-10%
Hovedbilde Tamiya 47414 Audi A4 Quattro Touring TT-01E uten ESC Hovedbilde Tamiya 47414 Audi A4 Quattro Touring TT-01E uten ESC
Tamiya 47414 Audi A4 Quattro Touring TT-01E uten ESC
Art.nr: 47414
Copied
Tamiya Audi A4 Quattro Touring TT-01E Length: 454mm. Image shows painted and assembled kit. This Tamiya R/C car recreates a classic Audi A4 Quattro Touring car as it raced in 1997. In the late 1990s, manufacturer-backed teams would come to dominate touring car series around the world. One of the most pre-eminent was Audi, which spared no expense in its pursuit of the top of the podium. Using its base A4 quattro as a platform, Audi developed the car significantly and turned it into a race winner. In addition, Audi sought the best drivers from around the world in order to do their creation justice. Tamiya recreates this racer on top of the TT-01 E chassis, which is ideal for beginner kit builders. The original release of this Audi was mounted on the Tamiya TA-03 machine. ★This R/C model assembly kit depicts a racing Audi A4. ★The sporty form is rendered beautifully in polycarbonate, with stickers included to recreate markings. ★The model is based upon the proven TT-01 Type-E shaft-driven 4WD chassis. ★Silver multi-spoke wheels are paired with slick tires.    

1.395,-

1.995,-

KJØP
-30%
Hovedbilde Tamiya 47420 1/10 RC Volkswagen Type 2 T1 Red/Wht Ptd ...
Tamiya 47420 1/10 RC Volkswagen Type 2 T1 Red/Wht Ptd ...
Art.nr: 47420
Copied
Tamiya 1/10 M06 Volkswagen Type 2 T1 Red White Pre-Painted Body Onroad EP Car Kit w/ ESC Motor This TAMIYA R/C model assembly kit depicts the 1st-generation (T1) variant of the Volkswagen Type 2 van, which was introduced in 1950 and also known as the Volkswagen Bus to many of its legions of fans. Production of the actual van continued through until 1967. The iconic R/C body replica is paired with the rear-wheel drive M-06 chassis for realistic fun driving just like the real RR Type 2 T1. Compared to the Full-Kit version (item 58668), this kit comes with a pre-painted body to make the body assembly process less intimidating to new kit building enthusiasts. M-06 Chassis The M-06 chassis features a Rear-Mounted Motor, Rear-Drive setup and features a longitudinally-mounted battery pack, with R/C radio gear positioned on either side for optimum balance and low center of gravity. 4-wheel double wishbone suspension is equipped with 60D radial tires at the front and 60D super grip tires at the rear. In addition, a 3-piece steering linkage offers nimble handling response. • 1/10 scale R/C model assembly kit. • Pre-painted Polycarbonate body. Comes pre-cut out with holes pre-drilled for attachment of the separately molded plastic parts for bumper, light cases and side mirrors (these require painting). • The M-06 chassis features a rear-motor, RWD setup with a longitudinally-mounted battery pack and R/C components positioned on either side for optimum balance and a low center of gravity. • 239mm wheelbase M-06L chassis. • Metal-plated dish type wheels. • Over a dozen Hop-Up Option parts are available to customize the chassis to your driving needs. • Includes Tamiya TBLE-02S ESC (electronic speed control) Capable of running sensor brushless motors and brushed motors alike. (21.5 Turn BL motor limit) (23 Turn brushed motor limit) • Requires: 2-channel radio, steering servo, and 7.2-volt battery pack with compatible charger

2.595,-

2.795,-

KJØP
-7%
Viser 1 til 25 (av 310 produkter)

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png