Tamiya 1/10 1990 Land Rover Defender 90 CC-02 NO ESC

Art.nr: 58700

3.295,- ~~3.495,-~~ -6%

Du vil motta en e-post så snart produktet er på lager!

En ukjent feil har oppstått. Prøve igjen

Tamiya

På lager: 2

Informasjon
Produsent

Tamiya 1/10 RC 1990 Land Rover Defender 90 (CC-02 Chassis)

Length: 429mm. Image shows painted and assembled kit.

Land Rover Legend
Loved by millions across the world for its superb 4WD performance and distincive functional form, the Land Rover Defender had a long production run from 1948 until 2016. This R/C model assembly kit recreates the short wheelbase Defender 90 variant from 1990, with the unmistakeable form captured by a polycarbonate body featuring front and rear light cases which are compatible with separately sold LEDs. Separate molded parts are included to depict features such as the outer roll cage, front grille and spare tire cover. The CC-02 chassis is a great base, providing a sure-footed drive whether on-road or off.

★Take a look at the model from the rear, with the timeless, squared-off lines of the Defender 90 expertly depicted by a polycarbonate body.

★Separate injection molded parts in the kit include the barred front grille, which adds another layer of detail to this classic body.

★Tough polycarbonate-ABS components are used to create the outer roll bar, a big part of the model’s off-road look.

★Spare tire cover depiction is also molded as a separate, and the DEFENDER logo on it is recreated using the included sticker.

★Six-spoke wheels molded in black plastic lend the model a highly realistic look, and are paired with capable block pattern tires.

★For those who want even more realism, the model headlights can be paired with separately sold LEDs to light up the Defender!

CC-02 Chassis – Off Road, Evolved
Designed for a wide range of off-road scenes including rocky terrain, the CC-02 chassis’ ladder frame is inspired by full-size vehicles and is the base for its superior durability. A 4WD setup employs the motor longitudinally behind the front axle with separated gearbox and transfer case, and propeller shafts transmitting power to the differential gears front and rear. Four-link rigid suspension is employed front and rear, with CVA oil dampers for all-encompassing control, even on tricky rock sections. This model comes with black six-spoke wheels and grippy block pattern tires. In this kit, the chassis is assembled with a 242mm wheelbase.

★A highly capable off-road drive awaits, with shaft-driven 4WD and front/rear 4-link rigid suspension setups on the CC-02 chassis.

★The ladder frame is modeled upon those employed by full-size cars, and offers excellent rigidity on this 1/10 scale vehicle.

★Axle housings are molded in reinforced plastic, and house 3-bevel differentials. They can be locked when running on lower-grip surfaces.

Specifications
★Length: 429mm, Width: 200mm, Height: 215mm ★Wheelbase: 242mm　★Tread: 160mm (Front), 163mm (Rear) ★Tire Width/Diameter: 33/90mm (Front & Rear) ★Ladder Frame ★Longitudinal Motor, Shaft-Driven 4WD ★3-Bevel Differential Gears ★4-Link Rigid Suspension (Front & Rear) ★Gear Ratio = 17.33:1 (using kit-standard 16T pinion) ★Type 540 Motor ★Electronic Speed Controller (ESC) is sold separately.

Separately Required Items
★2-channel R/C system w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger

The Defender 90 is a legendary Land Rover off-road car, and its roots go back to 1948. Based on differences in wheelbases, this car has three types – the Defender 90/110/130. This R/C model depicts a 3-door model with 93-inch wheelbase.

CC-02 Chassis - Off Road, Evolved
Designed for a wide range of off-road scenes including rocky terrain, the CC-02 chassis' ladder frame is inspired by full-size vehicles and is the base for its superior durability. A 4WD setup employs the motor longitudinally behind the front axle with separated gearbox and transfer case, and propeller shafts transmitting power to the differential gears front and rear. Four-link rigid suspension is employed front and rear, with CVA oil dampers for all-encompassing control, even on tricky rock sections. This model comes with black wheels and grippy block pattern tires.

• 1/10 scale R/C model assembly kit. Length: 429mm, width: 200mm, height: 215mm, wheelbase (short): 242mm (CC-01S chassis).
• Polycarbonate body pre-painted in light blue.
• Compatible with 5mm-diameter LEDs x2 for headlights and 5mm-diameter LEDs x6 for the rear.
• Includes separately molded parts for grille, side mirrors, light cases and outer roll gages.
• Black ABS resin wheels are paired with semi-pneumatic all-terrain rubber tires.
• The ladder frame CC-02 chassis features superior durability and employs front/rear coil spring suspension which is great for off-road surfaces including rocky terrain.
• Includes 540 Type brushed motor.
• A wide range of Hop-Up Option Parts is available to customize the CC-02 chassis.

Specs:

Adjustable Gear Ratio Yes
Bearings Plastic bushing
Body Material Polycarbonate pre-painted body
Body Stickers Included
Chassis Material FRP Fiberglass Reinforced Plastic
Chassis Type CC-02
Construction Type Assembly Kit
Differential Type Gear
Drive Type 4WD
Motor 540-brushed type
Required To Complete 2-channel radio,esc, steering servo, 7.2volt battery & battery charger
Scale 1/10
Shock Damper CVA Oil Filled
Suspension 4-link
Terrain Use Multi-Purpose

Tamiya

1946Mr. Yoshio Tamiya founded a saw mill/lumber factory in Shizuoka-City. Tamiya ventured into the modeling business in 1948, with a scale wooden ship model kit. Since then, Tamiya has been striving to offer merchandise that can truly be called "First in Quality Around the World."

Now Tamiya is offering more than 3000 different products, both in the fields of precision static models and high performance radio control vehicles. These products are not only sold in Japan but also exported in vast quantities to the United States, Europe, South East Asia, and to many other parts of the world. The standard of excellence achieved by Tamiya is regarded as among the very finest in the world of model hobbies.