Bronto Battery Doctor

Art.nr: bx100

Copied

Overvåk og mål batteriets helse. Hendig lite måleverktøy som veier kun 9 gram. Viser totalspenning på batteriet og spenning pr. celle. Også utstyrt med alarm. Bredde 40 mm Høyde 25 mm Dybde 11 mm Display 3 digit LED Total spenning 0.5V - 36V Enhets spenning 0.5V - 4.5V 1S display 3.7V - 30V Nøyaktighet +/- .V Vekt 9g

139,-

149,-

KJØP

-7%

DynoMAX 9420 Lithium Voltage Cell Checker with Alarm ...

Art.nr: B9420

Copied

LiPo, LiFe & LiIon Cell-tester with Low-Voltage Alarm 1-8S This is a small and practical Lithium battery cell-tester with built in low-voltage alarm. With this unit you can easily check your battery packs through the balance connector or have it installed in the model hooked up to the battery balance connector and get an buzzer tone when the set value is reached. Specifications: For 1S with JST-RCY (BEC) connector and 2-8S LiPo, LiFe & LiIon batteries with a JST-XH balance connector LCD: 0.5-4.5V/cell Cells: 1-8S Adjustable alarm value: OFF/2.7-3.8V per cell (pre-set at 3.3V) Volt precision: 0.01V Size: 40,5 x 29 x 13mm Weight: 14g

109,-

KJØP

Maxam P0401 LiPo Low Voltage Buzzer

Art.nr: 460074

Copied

LiPo Low Voltage Buzzer Også kjent som LiPo Alarm.   Overvåker spenningen i batteriet og gir alarmsignal når volten blir for lav.

85,-

Ikke på lager

SkyRC 500007 Battery checker & Equalizer LiPoPal

Art.nr: 500007-01

Copied

  Genial liten sak man kan bruke til å kontrollere cellespenning på lipobatterier. Den kan også balansere lipo, samt vise total spenning og antatt restverdi på batteriet.     Product details in english SKYRC LiPoPal is a simply used battery checker and self voltage balancer. When we are flying or running outside, it is difficult to know the remaining capacity of the battery. With this tiny LiPoPal we could check the voltage of each cell and the remaining capacity in percentage at anytime and anywhere. As we know, if each cell of the battery pack is balanced, the battery performance will be much better and the cycle life will be longer. But sometimes, we may don?t have time or tool to balance the battery cell. With this small kit, when it detects the pack is not balanced, it will start work to balance the pack cell at once. Functions: There are two functions of this compact device: 1.Battery CheckerThe LiPoPal can check the voltage of each cell of a lithium battery pack and remaining capacity in percentage. 2.Self Voltage BalancerThis program can equalize the individual voltages to their lowest one. Balance operation automatically starts about 5 seconds after the battery pack is connected. When the voltage difference between cells over 0.02V, the balancer will start to work. The corresponding voltage will be blinking when it is balancing. When the voltage difference between cells reaches 0.01V or less, balance operation ends and the device enters the sleep mode and SLP will be displayed on the LCD. How to use? Simply connect the battery pack to 7 pins connector (XH type). Please note the negative lead or pin of the LiPo connector should match the Negative marked on the shell of LiPoPal. After the LiPo is connected, the LCD display the voltage of each cell and the built in balance will check the voltage. If the pack is not balanced, the balancer will start working.   Applicable Battery Pack: 2-6S LiPo Voltage Display Tolerance: +/-1.5pst Voltage Display Resolution: 0.01v Voltage Display Range: 0-5v Balancing Current: 50mA Operating Temperature: 10+45deg Storage Temperature: -20+60deg Case Size: 70x38x11mm Weight: 23g

299,-

329,-

KJØP

-9%

Traxxas 2968 LiPo Cell Voltage Checker/Balancer

Art.nr: TRX 2968

Copied

LiPo Cell Voltage Checker/Balancer (2968) The Traxxas LiPo Cell Voltage Checker/Balancer connects to Traxxas LiPo batteries using the required Balance Lead Adapter (#2938X). Use the LiPo battery checker to view individual LiPo cell voltages and overall battery charge in the field without a charger. The battery cell checker works with 2, 3, and 4-cell Traxxas LiPo batteries and alerts you when a battery cell is out of balance. Built-In Balancer  A voltage balance function equalizes individual cell voltages to keep your LiPo battery in good condition.   2938X sold separately and shown for reference only.

349,-

379,-

KJØP

-8%

Traxxas 2968X Li-Po Voltage Meter/Balancer with ...

Art.nr: TRX 2968X

Copied

LiPo Cell Voltage Checker/Balancer (2968X)  The Traxxas LiPo Cell Voltage Checker/Balancer connects to Traxxas LiPo batteries using the included balance lead adapters. Use the LiPo battery checker to view individual LiPo cell voltages and overall battery charge in the field without a charger. The battery cell checker works with 2, 3, and 4-cell Traxxas LiPo batteries and alerts you when a battery cell is out of balance. Built-In Balancer  A voltage balance function equalizes individual cell voltages to keep your LiPo battery in good condition.  NOTE: Do not attempt to use the battery adapters for charging or any purpose other than adapting Traxxas iD batteries to the cell voltage checker.  

439,-

469,-

KJØP

-6%

Traxxas 2938X Adapter Traxxas ID Li-Po for volt check

Art.nr: TRX 2938X

Copied

The new #2938X Traxxas Balance Lead Adapter enables customers to connect their Traxxas iD batteries to accessory cell voltage checkers without using the EZ-Peak Live app with EZ-Peak Live chargers. The adapter is compatible with 2s, 3s, and 4s Traxxas iD LiPo batteries.  NOTE: Do not attempt to use the #2938X adapter for charging or any purpose other than adapting Traxxas iD batteries to accessory cell voltage checkers.

149,-

KJØP