Hopp til innhold
-8%

Traxxas 2968 LiPo Cell Voltage Checker/Balancer

Art.nr: TRX 2968

349,-

379,-

- 8%
Traxxas

Traxxas

På lager: 2

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

LiPo Cell Voltage Checker/Balancer (2968)
The Traxxas LiPo Cell Voltage Checker/Balancer connects to Traxxas LiPo batteries using the required Balance Lead Adapter (#2938X). Use the LiPo battery checker to view individual LiPo cell voltages and overall battery charge in the field without a charger. The battery cell checker works with 2, 3, and 4-cell Traxxas LiPo batteries and alerts you when a battery cell is out of balance.

Built-In Balancer 
A voltage balance function equalizes individual cell voltages to keep your LiPo battery in good condition.

 

LiPo Cell Checker with Battery

2938X sold separately and shown for reference only.

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Relaterte produkter

 

Art.nr: TRX 2968X
Copied
LiPo Cell Voltage Checker/Balancer (2968X)  The Traxxas LiPo Cell Voltage Checker/Balancer connects to Traxxas LiPo batteries using the included balance lead adapters. Use the LiPo battery checker to view individual LiPo cell voltages and overall battery charge in the field without a charger. The battery cell checker works with 2, 3, and 4-cell Traxxas LiPo batteries and alerts you when a battery cell is out of balance. Built-In Balancer  A voltage balance function equalizes individual cell voltages to keep your LiPo battery in good condition.  NOTE: Do not attempt to use the battery adapters for charging or any purpose other than adapting Traxxas iD batteries to the cell voltage checker.  

439,-

469,-

KJØP
-6%
Art.nr: bx100
Copied
Overvåk og mål batteriets helse. Hendig lite måleverktøy som veier kun 9 gram. Viser totalspenning på batteriet og spenning pr. celle. Også utstyrt med alarm. Bredde 40 mm Høyde 25 mm Dybde 11 mm Display 3 digit LED Total spenning 0.5V - 36V Enhets spenning 0.5V - 4.5V 1S display 3.7V - 30V Nøyaktighet +/- .V Vekt 9g

139,-

149,-

KJØP
-7%

Kunder kjøpte også

Hitec HS-82MG Standard Metal Gear Micro Servo   This is the HS-82MG Metal Gear Micro Servo from Hitec. FEATURES: For small planes, gliders, electric helicopters and 1/18 scale cars INCLUDES: HS-82MG Metal Gear Micro Servo with universal connector, 0.67" (17mm) diameter horn, 1.1" (29mm) double arm, 0.90" (23mm) 4-point horn and mounting hardware REQUIRES: Installing in model and connecting to receiver SPECS:              Speed: 0.12 sec/60° at 4.8V                            0.10 sec/60° at 6.0V           Torque: 38.88oz-in (2.8kg-cm) at 4.8V                   47.22oz-in (3.4kg-cm) at 6.0V           Weight: 0.66oz (19.0g)           Size: 1.17 x 0.47 x 1.16" (29.8 x 12.0 x 29.6mm)

419,-

459,-

KJØP
-9%
Hobbico Female Star Plug (4) This is a pack of four Hobbico Female Star Plugs with back caps. Now, there's a better option in polarized power plugs: the Star Plug. It's an option that's easier to grip and pull apart than other plugs, yet holds tight even in the most extreme situations. Its unique design makes for neater installations, because there's no need for heat shrink tubing. It's also compatible with the most common polarized plug in R/C. Features: T-Plug (Deans) Compatible Plug body and rear cap are molded from a strong, heat- and impact-resistant polymer. Tapered shape and grip strips for fast, easy separation. Rear caps include a center isolator that prevents terminals from shorting. Features gold-plated male terminals for excellent conductivity and nickel-plated female terminals for wear resistance and longer life. Stainless steel spring for tight connections even after hundreds of uses. Available Plugs: HCAM4010: Male (2) HCAM4020: Female (2) HCAM4021: Female (4) HCAM4001: Male & Female (1 Pair) Specifications:  Male Plug: Dimensions: 14.17 x 7.67 x 16.5 mm Weight: 3 g Contacts: gold-plated copper Spring: Stainless steel Female Plug: Dimensions: 15.42 x 7.67 x 18.5 mm Weight: 2.4 g Contacts: nickel-plated copper Max. Wire Gauge: 12AWG (with rear cap installed) 10AWG (without rear cap)

49,-

KJØP
D-MAX Wire Set Red & Black - 14AWG 1+1m This is a high quality wire with a high amount of copper strands making it very suitable for RC models and other hobby projects. The wire is covered with a silicone based insulation material and together with the high strand count it’s also very flexible.   Short and Thick is Good In electric high powered models we are recommending you to use short and as thick wires as possible (within reason) together with a matching diameter/area connector system for optimum performance. Specifications: Length: 1+1m AWG Wire: 14 Area Wire: 2.5mm2 Diameter Wire: 2mm Diameter Insulation: 3.6mm Wire: 400 Strands of Copper @ 0.08 mm Insulation: Silicone Based

69,-

KJØP
En fantastisk maskeringsfilm som tillater å maskere kurver!   Denne er helt utrolig og må bare prøves.   Masking is a job which modelers of all kinds of models in every scale must carry out, and it requires precision in order to ensure that your creation gets the perfect paint job. This masking tape helps in the process, allowing smooth and secure masking-off of curved lines where standard masking tape would sustain creases and possibly let paint seep underneath. This tape is available in 3 separate widths to meet a variety of needs such as 2mm, 3mm and 5mm respectively. Length of roll: 20m A soft resin material is used, allowing the tape to adhere in a curved line while preventing paint from seeping into masked off areas. Use of narrower tape is recommended for sharper curves.

69,-

KJØP
 This is a 100ml Spray Can of Synthetic Lacquer Paint from Tamiya. FEATURES: Cures in a short period of time.           Extremely useful for painting large surfaces.           100ml is enough to fully cover two or three 1/24 scale sized car             bodies.           Tamiya spray paints are not affected by acrylic or enamel paints.             Therefore, following the painting of the entire assembly, details             can be added or picked out using enamel and/or acrylic paints.  By             combining three different paints, the decoration of plastic             models will become simpler and more effective.           INCLUDES: One 100ml Spray Can of Synthetic Lacquer Gun Metal Paint. REQUIRES: Eye, Lung and Skin Protection. COMMENTS: Highly Flammable, Pressurized Container.            Keep out of the reach of children.

109,-

KJØP
 This is a 100ml Spray Can of Synthetic Lacquer Paint from Tamiya. FEATURES: Cures in a short period of time.           Extremely useful for painting large surfaces.           100ml is enough to fully cover two or three 1/24 scale sized car             bodies.           Tamiya spray paints are not affected by acrylic or enamel paints.             Therefore, following the painting of the entire assembly, details             can be added or picked out using enamel and/or acrylic paints.  By             combining three different paints, the decoration of plastic             models will become simpler and more effective.           Available in 52 colors. INCLUDES: One 100ml Spray Can of Synthetic Lacquer Gloss Clear. REQUIRES: Eye, Lung and Skin Protection. COMMENTS: Highly Flammable, Pressurized Container.            Keep out of the reach of children.

109,-

KJØP
To ladeutganger 1000W makseffekt Støtter rask utlading Kompakt format SkyRC T1000 er en kraftkar av en lader med 2 separate ladeutganger. Laderen kan brukes på 10-30V DC strømkilde og kan da yte hele 1000w totalt fordelt på 2 utganger. Ved bruk på 220V AC strømkilde så yter laderen maks 450W totalt fordelt på de to kanalene. Laderen har mange funksjoner og bruksområder som paralell-lading, til kobling til ekstern utlader og bruk som powersupply for å nevne noen. PS! Produkt kan avvike fra video. Klippet er lagt til som relevant opplysning til produktet, men er ikke nødvendigvis identisk. Innhold i en produktvideo, testvideo eller et review kan avvike fra produktet som selges. Dette kan gjelde farger, spesifikasjoner, versjonsforskjeller, regionsforskjeller m.m. Det er produktets navn, beskrivelse og bilder du skal forholde deg til ved kjøp av varen.   SkyRC T1000 er en god multilader som kan lade LiPo, LiHV, LiFe, LiIon, NiHm, NiCd, AGM og Pb batterier. Laderen kan bruke både 12-30V og 220V kilde inn, så denne laderen vil kunne brukes både i felten på ett bilbatteri og på hobbyrommet plugget rett i veggen eller via powersupply. Laderen har to ladeutganger og hver av de har max ladestyrke på 500W/20A, Bruker man laderen på 220V AC har de to ladeutgangene 450W til å fordelene seg imellom, så bruker man 100w på den ene utgangen er det 350w tilgjengelig på den andre utgangen. Merk at skal man benytte seg av maks ytelse via DC-powersupply bør det kunne levere 30V da maks strømstyrke inn er 35A. Det følger med 220V strømkabel. Skal man benytte laderen på 12-30V må man ha en tilkobling med XT60 i enden (følger ikke med). Skal man lade andre batterier enn batterier med XT60 må man ha overgang + eventuell ladekontakt. Det anbefales også å kjøpe med balanseringsbrett for å få mer lengde å gå på til balanseringskontakten på batteriet.   Utlading: Laderen støtter kobling mot utlader BD350 som er ekstrautstyr. BD350 kobles da i egen port på laderen og man har bedre kontroll over utlading. BD350 støtter utlading opp til 350W/40A. Spesifikasjoner: Vekt 1370gram Innspenning DC 10-30V Innspenning AC 100-240V Display LCD Størrelse 190x153x100mm Backlight Ja Antall celler LiPo 1-6S Antall celler NiMh/NiCD 1-15 PB 2-20V Ladestyrke 0.1-20,0A Maks Ladeeffekt 1000W Utladeeffekt max 10Wx2 uten BD350 Minne 10 modellminner Skal man lade batterier med andre typer strømkontakt, må tilbehør kjøpes. Skal man balansere LiPo med annen type balanseringskontakt, kjøp eksempelvis SkyRC Multi balanseringskontakt. Se under for tilbehør. Viktig info! Husk at ved lading av lipo batterier skal man for å oppnå full balansering av pakken kople til begge kontaktene fra batteriet og velge LiPo Balance programmet, ikke LiPo Charge. Inkludert i eska: T1000-laderen og 220V strømkabel.

2.995,-

3.195,-

KJØP
-6%
Extension Balance Lead 6S XH 30cm This is a practical extension lead suitable for Lithium based batteries that are equipped with the popular XH balancing connector. When charging the battery is recommended to be inside an charging/storing safe bag and the original short balance lead/adapter makes it hard to reach. With this extension lead the charging is much easier! Specifications: Cells: 6 Length: 30cm Wires: 22AWG Connectors: JST-XH Male & Female

49,-

KJØP
XT90 ANTI SPARK PAIRS INCLUDING HEAT SHRINK (5PCS)

429,-

459,-

KJØP
-7%
SAVÖX SC-1252MG Plus - Metal-Geared High-Speed Digital Low-Profile Servo V2 The SC-1252MG+ is a high speed, low profile servo which combines leading edge technology with super high 12 bit (4096) resolution. Ideal for 1/10 on-road cars where space is limited and speed is desired. Features: Metal gear train ensures durability under harsh situations Ideal for 1/10 on road vehicles Aluminum case provides cooler operating temperatures New: SSR compatible New: Soft Start Specifications: Voltage range: 4.8-6.6V Torque @ 4.8V: 4.5kg/62.5oz-in Torque @ 6V: 7kg/97.2oz-in Speed @ 4.8V: 0.08 sec/60 deg Speed @ 6V: 0.07 sec/60 deg Dimensions L x W x H: 40.8 x 20.2 x 25.4mm Weight: 44.5g Technical Details: Operating Temperature: -10° to 50°C Running Current (no load): 150mA @4.8V, 180mA @6.0V Stall Current (at locked): 2000mA @4.8V, 3000mA @6.0V Idle Current: 5mA @4.8V, 5mA @6.0V Wire Length: 300 +/- 5mm Output Gear Spline: 25 Tooth Bearings: 2BB Operating Travel: 90° (1000 → 2000 µ second) Neutral Position: 1500 µ second Pulse Width Range: 950 → 2050 µ second Maximum Travel: Appx 160° (700 → 2300 µ second) Refresh Rate: 240 Hz Motor Type: Coreless

869,-

KJØP
Yeah Racing 25T 7075 Aluminum Servo Arm Horn For Futaba Savox Black #YA-0574BK Dual hole servo horn from Yeah Racing which allows you to choose the right amount of throw in conjunction with your chassis! Features a silver edge finish to give your chassis that bling look! A securing hole on the side to make sure this servo horn stays on your servo.   Features: For: Futaba Savox Power HD Blue Bird Servos (for crawler car) Material: 7075 Aluminum Color: Black   Includes: Yeah Racing 25T Aluminum Servo (1 pc) Servo Horn Securing Screw (1 pc) M3 Screw (1 pc)

129,-

139,-

KJØP
-7%
         These are 3x8mm Countersunk Hex Head Screws by Traxxas.               Can be used anywhere this type of screw is needed. FEATURES: Metal Construction           Black in Color           Countersunk INCLUDES: (6) Screws SPECS:    Length:   8mm           Diameter: 3mm

35,-

KJØP
Denne radioen passer blant annet WLT-144001, 12427, 12428, 12429, 124016, 124017, 124018, 124019, og 104001. Leveres uten mottaker. 144001 144001 12427/12428 12429 124016 124017  124018 124019 104001

299,-

349,-

KJØP
-14%
NB: Husk at dette batteriet er beregnet på å bli brukt i ladere med ID-funksjon.   This is the Traxxas Power Cell 7.4V 2200mAh 25C 2S LiPo Battery.     FEATURES Semi rigid construction does not require a hard case and eliminates  wire harness connectors that can loosen and fail  Engineered specifically to fit Traxxas models  New high current connector with gold-plated copper terminals and  integrated balance connector  iD Auto Battery Identification allows Traxxas iD equipped chargers to  automatically set and optimize charge settings for specific battery  MAXX cable high-efficiency 16 gauge silicone jacketed wire   INCLUDES Traxxas Power Cell 7.4V 2200mAh 25C LiPo 2S Battery with High  Current Connector and Integrated Balance Connector   REQUIREMENTS LiPo compatible charger such as the Traxxas EZ-Peak Plus  LiPo charging bag   SPECIFICATIONS  Configuration: 2S2P  Continuous Discharge: 25C (55A)  Max Burst Rate: 50C (110A)  Watt Hours: 16.28  Charge Rate: 1C (2.2A)  Max Charge Rate: 2C (4.4A)  Dimensions: 3.5 x 0.83 x 1.2" (88 x 21 x 30mm)  Weight: 4.2oz (118g)

549,-

569,-

KJØP
-4%
Charge Lead T-Plug with 4mm banana plugs

99,-

KJØP
  WLToys A959-B-23 7.4V 1500mAh Lipo Flat RSR/-B Deans WLToys 7.4V 1500mAh LiIpo for flere ulike WLToys-biler. Blant annet Buggy RSR 144001, A959-B, A969-B og A979-B. Flate celler.   Spesifikasjoner Størrelse 62x32x18mm Vekt 95gram Balanseringskontakt    XH Batteriplugg Deans

199,-

229,-

KJØP
-13%
Traxxas 2916 - 100 Watt USB-C Power Cable Take advantage of the full USB-C standard with the Traxxas 100-watt USB-C power cable. Not all USB-C cables are created equal. When combined with the 2912 Traxxas 45-watt power supply, the Traxxas USB-C power cable is guaranteed to maximize output for fast, reliable charging. Power Cable Features:­ 5 amp, 100 watt capable Braided sleeve Anodized aluminum plugs with plastic overgrip 1.5 m long Accessory part for these models: BIGFOOT® No. 1 Officially Licensed Replica Rustler® Slash® Stampede®

79,-

KJØP
Traxxas 71076-8-PRPL - E-Revo 1/16 VXL with USB-C charger & NiMH battery 1/16 E-Revo® VXL takes all the track-proven innovation of the full-size E-Revo VXL and scales it down to a convenient go-anywhere size. E-Revo's rocker-actuated suspension has been expertly adapted to 1/16 scale with its oil-filled, threaded-body GTR shocks. This superior technology provides capability, performance, and tuning functions at the absolute pinnacle of truck design. E-Revo's monocoque chassis balances strength and weight to far surpass the standards of the "mini" category. FEATURES ON 1/16 E-REVO VXL (71076-8) Traxxas Stability Management (TSM)® 7.2 volt Traxxas Power Cell NiMH battery with iD® 2-amp USB-C fast charger TQi™ 2.4 GHz transmitter and receiver 48+ kph with included NiMH battery 80+ kph with additional NiMH battery* Rocker-actuated suspension for superior handling and control Full-time 4WD Velineon® 380 brushless motor Waterproof electronics Torque-Control™ slipper clutch Sealed differentials All-terrain tires with foam inserts Class-Leading Speed Some mini-models are "fast for a mini." That's not good enough for Traxxas. The 1/16 E-Revo VXL is just plain fast. At 30+ mph with the included 6-cell NiMH battery, E-Revo VXL is faster than most mini models and even 1/10 scale electric RTR trucks. Install a second 6-cell battery to unleash the Velineon Brushless Power System's full fury, and E-Revo VXL jumps to over 50 mph. Velineon Brushless Power Built specifically for Traxxas 1/16 scale models, the VXL-3m™ speed control and Velineon® 380 motor represent the latest in brushless technology. Fully LiPo compatible with low-voltage detection for 2s and 3s packs and rated for 6-12 NiMH cells, this potent, powerful combo gives E-Revo VXL precise throttle control and blistering top speed. The Velineon 380 is built with high-speed ball bearings, sintered rotor, neodymium magnets, and gold plated 3.5 mm connectors. It all adds up to 50,000 rpm of pure power and speed! Battery and USB-C Charger Included! 1/16 E-Revo includes a powerful 7.2 volt 1200 mAh Traxxas Power Cell rechargeable NiMH battery pack to reach its 30+ mph top speed. Fast 2-amp charging is available virtually anywhere thanks to the included USB-C battery charger with iD® technology. Power adapter and cable sold separately. For maximum charge rate use Traxxas 2912 45-watt power adapter and 2916 100-watt power cable. The Traxxas iD system is the easiest and safest way to charge your Traxxas batteries. The charger automatically recognizes the iD battery and optimizes the charge settings as soon as you plug it in. There’s no guesswork involved, just fast, reliable charging every time. 1/16th E-REVO BRUSHLESS VXL (71076-8-PRPL) SPECS: Length: 328 mm Width: 239 mm Weight: 1.09 kg Height (overall): 117 mm Wheelbase: 202 mm Front Shock Length: 48 mm Rear Shock Length: 48 mm Front Tires (pre-glued): Talon™ 2.0" Rear Tires (pre-glued): Talon™ 2.0" Front Wheels: 2.0" Gemini (black-chrome) Rear Wheels: 2.0" Gemini (black-chrome) Electronic Speed Control: Waterproof Velineon® VXL-3m™ Motor (electric): Velineon 380 brushless Transmission: Heavy duty single speed Gear Ratio (internal): 5.04:1, (reversed input: 9.72:1) Overall Drive Ratio: 9.00 (stock, out-of-box) Differential Type: Sealed, hardened steel bevel Gear Pitch: 48 pitch Chassis Structure/Material: Molded composite Nylon monocoque Brake Type: Electronic Drive System: Shaft-driven 4WD Steering: Bellcrank Radio System: TQi™ 2.4 GHz w/TSM® Top Speed: 48+ kph (80+ kph with dual batteries)* Skill Level: 2 Included Batteries: 6-cell NiMH with iD® Included Charger: 2-amp USB-C fast charger Required Batteries: 4 "AA" (transmitter) Traxxas 2080 Servo

4.595,-

4.995,-

KJØP
-8%
  Bronto ladekabler er et must for RC-entusiasten. Ladekabelen er utstyrt med kvalitets 14AWG ledninger. Ladeledningen har en praktisk lengde på 30cm, noe som er godt egnet når du f.eks skal legge batteriet trygt i en sikker ladebag mens det lades. Ladekabel med Traxxas-ID2 til XT60-plugger. Benyttes for lading av batterier med Traxxas ID2-plugg, og kobles rett i ladere med XT60 tilkobling. Spesifikasjoner   Ledning 14AWG Lengde 30cm Tilkobling 1 XT60 Tilkobling 2 Traxxas ID2

125,-

KJØP
Louise X-UPHILL Tires (MFT) on Black Kraton 8S Wheels Truck tires for the high performance Arrma Kraton 8s. The new X-UPHILL tire has the new incorporated MFT technology that is engineered to limit tire expansion (normally refered to as "balooning"). They are mounted on a new very sturdy black nylon 7-spoke wheels with a Kraton 8s specific 24 mm hex. The X-UPHILL tire is a good allround tire for most rough surfaces including grass and hard-packed clay! Micro Fiber Tech Features (MFT): New innovation and technlogy Reduces over balooning More ridgid overall tire structure Less distorsion/flex Stable and even contact with the road surface - more grip and longer tire life Fits: Arrma Kraton 8s (Also may fit other trucks with 24 mm hexes) Specs: Micro Fiber Tech system (MFT) Tire Diameter: 212.8 mm Tire Width: 98.2 mm Hex: Kraton 8s 24 mm Tire Compound: Sport Wheel finish: Black Nylon Outer Diameter: 213 mm Scale: 1/5, Large Scale Suit: Truck Surface: Grass, Gravel Compound: Sport Width: 98,2 mm Drive: 24mm hex Special: For Kraton 8s, MFT (Micro Fiber Tech)

699,-

749,-

KJØP
-7%
Produktinformasjon 3s 5000mAh - 60C - Gens Ace Bashing G-Tech XT90 er et godt valg til radiostyrte biler som krever 3s LiPo. Batteriet har dimensjonene 135x43x26mm og veier 343g. XH-type balanseringskontakt som er kompatibel med de fleste LiPo-ladere.   G-Tech Har man G-tech lader og batteri, vil lader kommuniserer med batteriet via balanseringspluggen. Her får laderen informasjon om batteriet som celleantall, spenning, kapasitet og helse. Laderene velger da korrekt ladeprogram og ladestyrke automatisk. Ladestyrke kan endres manuelt etter oppstart ved behov. G-Tech kontakten er kompatibel med vanlige LiPo-ladere med XH-balanseringsport så man kan lade dette batteriet på samme måte som vanlige LiPo-batterier. Spesifikasjoner: Kapasitet: 5000mAh Spenning: 3S 11.1V Vekt: 343g Størrelse: 135x43x26mm Strømplugg: XT90 Balanseringsplugg G-Tech   Gens ace lipo 5000mah 3S1P 60C battery Suited to the following models:1/8, 1/10 RC car model, such as 1/8 SLEDGE. Fast charging by 5C is available.

629,-

679,-

KJØP
-7%
Driveshaft, center rear, 6061-T6 aluminum (black-anodized) (fully assembled)/ 3mm screw pin (2)

269,-

299,-

KJØP
-10%
Dualsky 2S 300mAh - 30C - med JST Meget lett 2S LiPo på 18gram, som leveres med JST-kontakt. Spesiell dimensjon for flere småfly der batteriet skal inn i kroppen. XH-balanseringskontakt. Kjøper man overgang til JST-PH kan man bruke denne i flere Horizon-Hobby/Blade-produkter.   Spesifikasjoner   Dimensjoner 45x 18x 14mm (L x B x D) Vekt 18g Kapasitet 300 mAh     Product details in english Specifications: Capacity (mAh): 300 Voltage (V): 7.4 Weight (g): 18 Dimensions (L x W x T):45x18x14 mm Max Cont. Discharge:25C Max Charge Rate:2C Max Burst Discharge:50C Max Cont. Current(A):7.5 Max Cont.Output: 53W

109,-

119,-

KJØP
-8%
     This is a Sponsor Decal Set for R/C Cars                                 from Traxxas. FEATURES: These decals are designed to be used on any scale lexan R/C car and             truck bodies.           Pressure sensitive, peel and stick vinyl decals.           These are the contingency/sponsorship decals that are used on race             cars.           Logos include: Traxxas, Lunati Cams, Hedman Hedders, Simpson, MSD,             Mr. Gasket, NOS, Accel, Hurst, and more.           Multi-purpose decal set is appropriate for any type of car. INCLUDES: One Sponsor Decal Set. SPECS:    Length: 9-1/8" (23.2cm)           Width:  5-1/8" (13.0cm)

59,-

KJØP
Produktinformasjon: Flottører medfølger Integrert gyrostabilisering 1.2 meter vingespenn Leveres RTF (Ready to Fly) FMS Super EZ med et vingespenn på over 1.2m. Medfølgende flottører festes enkelt, og gjør modellen klar til å brukes på vann. Modellen leveres som RTF og med alt som behøves for å kunne fly, utenom 4stk AA-batterier til radio. Monteringstid er estimert til rundt 15 minutter. Med materiale av EPO oppnår man en solid konstruksjon som tåler mye, samtidig som det er veldig lett. Med modellens lette vekt og kraftig motoroppsett ved bruk av 3s LiPo oppnår man en flytid på rundt 8 minutter avhengig av flystil. Batteriet som følger med er 3S 1300mAh med XT60-kontakt men man kan gjerne bruke større batterier opp til rundt 2200mAh. Laderen er 220V vegglader og lader det medfølgende batteriet på rett over en time. Med Reflex-systemet til FMS får man tre flymoduser, stabilisert, optimalisert og av. Valg av modus avhenger av dine ferdigheter, som gjør flyet perfekt til både nybegynneren og eksperten. Systemet gjenkjenner også automatisk signaltypen fra din mottaker, byttende mellom SBUS, PPM og PWM. Gyro stabiliseringssystem integrert. Les mer om Reflex-systemet under på engelsk.   Vingespenn: 1220mm Lengde: 1020mm Flyvekt: Ca 890g Motorstørrelse: 3136-KV1200 ESC: 20A Propellstørrelse: 10x5 2-blads propell Anbefalt batteri: Li-Po 3s 11.1V 1300-2200mAh 25C+ med XT60-kontakt Antall kanaler: 4+ Anbefalt aldersminimum: 14+ FMS Super-EZ V4 RTF - Now with 3-Axis Reflex V2 Stabilization! The upgraded V4 Super-EZ RTF has now a new radio and is equipped with a 3-axis Reflex V2 system with built in gyro function! The model also comes with normal landing gear and the optional float set is now included! In the new Reflex system, there are three flight modes: Stabilized, Optimized & Off, which are designed for pilots with different skill levels. The Reflex functions help pilots more easily to operate and insist flying performance. Reflex System Overview: Utilizes a high-speed 32-bit ARM processor onboard. Sensors: Solid-state 3 axis gyro and 3 axis accelerometer. Automatically recognizes SBUS/PPM/PWM systems, compatible with all radio systems with 4 channels or above. Easy operation: the Reflex system is programmed specifically for the aircraft it is connected to. No further programming is needed. The user only needs to connect their receiver to the gyro and setup the aircraft normally. 3 Reflex Flight Mode Functions: Stabilized, Optimized or off. This is controlled with a 2 or 3 position switch on the transmitter. When assigned to a 2 position switch, the Reflex system switches between stabilized and optimized modes. If the transmitter does not have adequate auxiliary channels, the included jumper should be used to change the control mode of the Reflex system. Reflex Stabilized mode: Designed for beginners, Reflex will rapidly level the aircraft from any attitude when this mode is activated. Stabilized mode combines accelerometer and gyro data to determine how to level the aircraft when the control sticks are released giving pilots absolute peace of mind. Reflex OFF: Turns off all gyro functionality, the aircraft is flown completely manually when the gyro is off. Reflex Optimized Mode: Utilizing advanced solid-state gyros, the Reflex system maintains aircraft attitude by counteracting inflight upsets- from gusts to crosswinds. With Reflex, even small aircraft will fly with the confidence of something much larger! Specs: Wingspan: 1220mm Overall Length: 1020mm Flying Weight: 890g Motor: BL3136-KV1200 ESC: 20A Servo: 4x 9g Servo Radio: 4 Channels CG (center of gravity): 55-65mm (From leading edge) Prop: 2-blade 10x5 Battery: LiPo 11.1V 1300mAh 25C (XT60 connector) Charger:  Aileron: Yes Elevator: Yes Rudder: Yes Flaps: No Retracts: No Approx. Flying Duration: 8min Minimum Age Recommendation: 14+ Experience Level: Beginner Recommended Environment: Outdoor Assembly Time: 30 minutes Is Assembly Required: Yes Material: Durable EPO Requires: Alkaline batteries to the transmitter Delivered as: Ready-To-Fly Operating Mode: Electric Plane Type: Seaplane, Trainer Span: 1220 mm Suitable For: Experienced Length: 1020 mm Material: Foam Weight: 895 g ESC: 20A BL Transmitter: 2,4GHz Aileron: No Motor Type: Brushless Motor/Engine: BL 3136-1200kV Battery: 3S 1300mAh Li-Po Charger: Yes Also Including: Floats Needed To Complete: 4 AA batteries for transmitter

3.495,-

3.695,-

KJØP
-5%
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png