Hopp til innhold

90376-4 Stampede 4x4 VXL HD

Populært i denne kategorien

 
Art.nr: TRX 1552
Copied
These are replacement motor screws and washers for any 05 size motor. Features: 6 3x8mm socket head screws           6 3mm washers           1 Hex allen wrench

39,-

KJØP
Art.nr: TRX 1664
Copied
This is the replacement front shock shafts for the Traxxas LSII. Includes: 2- front shock shafts.

39,-

KJØP
Art.nr: TRX 1726
Copied
This is a replacement antenna tube. Antenna tubes are used to help secure and protect reciever antenna wires. INCLUDES: 1 blue antenna tube and 1 black antenna tube cap. SPECIFICATIONS: Length: 11"                 Outside Diameter: 1/8"

29,-

KJØP
Art.nr: TRX 1942
Copied
This set of rod ends, balls, and screws is used on all but four of Traxxas' kits.  It WILL NOT WORK ON: the Sledgehammer, original Hawk, Cat, or Bullet. Includes:  4 short rod ends (17mm)            16 long rod ends (19mm)            2  ball screws            18 hollow ball connectors

85,-

95,-

KJØP
-11%
Art.nr: TRX 2072A
Copied
Gear set (for 2070, 2075 servos)

49,-

KJØP
Art.nr: TRX 2074
Copied
This is the replacement Servo Case and Gasket Set for the Traxxas                 2056 - and 2075 (we don't stock) Servos FEATURES: Three piece plastic case molded in blue and black color           Replaces worn or damaged servo cases and gaskets INCLUDES: One Upper Case (blue plastic)           One Middle Case (blue plastic)           One Lower Case (black plastic)           One Upper Case Gasket           One Lower Case Gasket           One Output Shaft O-Ring           Four Case Screw O-Rings REQUIRES: Assembly  

79,-

KJØP
Art.nr: TRX 2075
Copied
Traxxas 2075 - Waterproof Digital Servo The 2075 digital ball bearing servo provides precise control, quick responses, and outstanding torque with a waterproof case for worry-free driving in water, mud, and snow. Features 125 oz-in torque and a transit time of 0.16 sec /60°. SPECS:    Ball Bearing Digital High-torque Power: 125 oz-in (9kg/cm) Transit Time: 0.17 sec/60° Size: L=55mm, H= 42.75mm, W=21.5mm

549,-

589,-

KJØP
-7%
Art.nr: TRX 2534
Copied
This is a 3x6mm Countersunk Machine Screw Set from Traxxas FEATURES: Steel construction INCLUDES: (6) 3x6mm screws

35,-

KJØP
Art.nr: TRX 2535
Copied
 These are the Countersunk 4mm x 10mm Screws              for the Traxxas Nitro Jato Stadium Truck. FEATURES: Metal construction           Black in color INCLUDES: Six 4mm x 10mm Countersunk Flathead Hex Screws REQUIRES: Assembly onto Vehicle

35,-

KJØP
Art.nr: TRX 2554
Copied
These are 3x5mm Backplate screws for the Traxxas 2.5 Engine. FEATURES: Black steel construction. INCLUDES: Six black steel cap head screws. REQUIRES: Assembly on coverplate. SPECS:    Length: 5mm           Diameter: 3mm COMMENTS: These may also be referred to as coverplate screws.

35,-

KJØP
Art.nr: TRX 2656
Copied
This is a set of XXL shock shafts for the Traxxas shocks. Includes: Two shock shafts Features: hardened chrome/steel construction Specs: 2 1/8" long or 54mm          1/16" diameter or 1.5mm Requires: Extra long shocks Comments: These are threaded on one end, and have the slots for e-clips on the           other.

39,-

KJØP
Art.nr: TRX 2742X
Copied
This are Rod Ends Short for the Nitro T-Maxx.              These rods ends attach to turnbuckles for front/rear. FEATURES: Black nylon rod ends           Steel pivot balls INCLUDES: Six nylon rod ends           Six pivot balls REQUIRES: Turnbuckles: TRX 2742X SPECS:    Length: .695" (17.6mm)           Inner Diameter: .217" (5.5mm)

49,-

Ikke på lager
Art.nr: TRX 3340
Copied
The Velineon® VXL-3s Accessory Cooling Fan reduces ESC temperatures during extended operation for maximum power flow. It securely clips onto the VXL-3s heatsink for easy installation. Wires are neatly routed thanks to the integrated connector clip. Simply plug the accessory cooling fan into the Velineon VXL-3s accessory power connector and clip the fan onto the heatsink for increased cooling.  

299,-

329,-

KJØP
-9%
Art.nr: TRX 3347
Copied
These are the Traxxas Button-Head 2.5 x 5mm Screws. FEATURES: Metal construction           Black in color INCLUDES: Six 2.5 x 5mm button-head hex screws REQUIRES: Installation on the vehicle

35,-

KJØP
Art.nr: TRX 3352R
Copied
This is the Rebuild Kit for the Traxxas Velineon                         3500 Brushless motor - TRX 3351  FEATURES: Improves performance of an old motor           Step-by-step instruction sheet guides you through the process INCLUDES: Two 5 x 11 x 4mm Bearings           One 5 x 7 x 13mm Brass Bushing           One 5 x 7 x 5.6mm Brass Bushing           Four 2.5 x 5mm Button Head Screws (1.5mm hex size) REQUIRES: Removal of old parts and installation of new parts following the            included instruction sheet COMMENTS: For the replacement motor rotor order TRX 3353                               For the replacement motor cover endbell order TRX 3354   020334335203

149,-

KJØP
Art.nr: TRX 3461
Copied
Motor, Velineon® 540XL, 2400Kv 70mm, brushless (assembled with 12-gauge wire and gold-plated bullet connectors) (for Maxx®)

1.395,-

1.595,-

KJØP
-13%
Art.nr: TRX 3642
Copied
This is a Package of 3x12x5mm Shoulder Screws for many                           Traxxas Vehicles. FEATURES: Black steel construction           Screws are half-threaded/half-smooth           Phillips head INCLUDES: Six 3x12x5mm shoulder screws SPECS:    Length: 12mm (.47")           Diameter: 3mm (.12")           Thread Length: 5mm (.20")

39,-

Ikke på lager
Art.nr: TRX 3655R
Copied
Utgått! Erstattet med TRX 3655-BLK Suspension arms, front/rear (left & right) (2) (heavy duty, cold weather material)

Art.nr: TRX 3757X
Copied
This is a pair of Traxxas White Rear Springs. FEATURES: Painted white           Steel construction INCLUDES: Two springs SPECS:    Length:                  3.19"               (81mm)           Inside diameter:          .61"               (15mm)           Outside diameter:         .71"               (18mm)

49,-

KJØP
Art.nr: TRX 3758X
Copied
This is a pair of Traxxas White Front Springs. FEATURES: Painted white Steel construction INCLUDES: Two springs SPECS:    Length:                  2.46"               (62mm)           Inside diameter:          .61"               (15mm)           Outside diameter:         .71"               (18mm)

49,-

KJØP
Art.nr: TRX 3762A
Copied
Denne passer til: -Bandit XL5/VXL bak. -Rustler XL5/VXL bak. -og til flere Traxxas biler. Sjekk manualen til din bil.   This is a pair of the Ultra Shocks for the Traxxas Bandit, Rustler, Stampede 2WD, E-Maxx, T-Maxx and Slash 2WD. FEATURES: Gray composite bodies           Stock replacement unassembled shocks           Preload spacers and two red springs INCLUDES: Two Ultra Shocks for the Traxxas Cars with bottle of silicone             oil and assembly diagram REQUIRES: Assembly COMMENTS: Two pairs are required if replacing all shocks.

219,-

KJØP
Art.nr: TRX 3765A
Copied
These are the Long Shock Bodies for the Traxxas Ultra Shocks. FEATURES Molded Composite Gray in Color INCLUDES Two ultra shock bodies (long) REQUIREMENTS Installation SPECIFICATIONS Length: 1.45" (37mm) Diameter: .51" (13mm)

39,-

KJØP
Art.nr: TRX 3766A
Copied
These are the Shock Bodies for the Traxxas Ultra Shocks  used on the Traxxas T-Maxx 3.3.   FEATURES Molded Composite  Gray in Color   INCLUDES (2) Bodies   REQUIREMENTS Installation  SPECIFICATIONS  Length: 1.777" (45.1mm)  Diameter: 0.521" (13.2mm)

39,-

KJØP
Art.nr: TRX 3767
Copied
 These are Shock Caps and Bottoms for Traxxas kits.                 These seal the shock containing the shock oil. FEATURES: Nylon construction INCLUDES: Two nylon shock cap (tops) Two nylon shock cap (bottoms) REQUIRES: Other shock components SPECS: Diameter Tops Bottoms 16MM 13MM COMMENTS: These fit the N/E 4-tec, N/E Stampede, and T/E-Maxx

39,-

KJØP
Art.nr: TRX 3768
Copied
These are the Traxxas Spring Retainers for Traxxas Shocks.        This set contains the spring retainers that hold the springs in     place over the shock body and the piston heads that control the amount                      of oil flow in the shock cylinder. FEATURES: Constructed of molded plastic.           Contains enough parts for two shocks.           Fits the shocks on most Traxxas nitro and electric powered vehicles.           Two hole piston head for greater dampening or three hole piston head             for softer spring performance. INCLUDES: One Traxxas Spring Retainer Set with:             Two upper and two lower spring retainers             Two 2 hole piston head covers             Two 3 hole piston head covers REQUIRES: Disassembly of shock to install parts.

39,-

KJØP
Viser 1 til 25 (av 124 produkter)
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png