Hopp til innhold

Traxxas 2074 Servo Case/Gaskets

Art.nr: TRX 2074

79,-

Traxxas

Traxxas

På lager: 2

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

This is the replacement Servo Case and Gasket Set for the Traxxas
                2056 - and 2075 (we don't stock) Servos


FEATURES: Three piece plastic case molded in blue and black color
          Replaces worn or damaged servo cases and gaskets


INCLUDES: One Upper Case (blue plastic)
          One Middle Case (blue plastic)
          One Lower Case (black plastic)
          One Upper Case Gasket
          One Lower Case Gasket
          One Output Shaft O-Ring
          Four Case Screw O-Rings


REQUIRES: Assembly

 

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

M-DRIVE PRO TiN Hex/Allen Wrench Spare Tip - 2.5mm Straight Hex High quality PRO level hex/allen wrench spare hardened steel tip with TiN coating.   Specs: Length: 100mm Tip/Bits Hex Size: 2.5mm Tip/Bits Diameter: 3mm Tip/Bits Material: Hardened steel with TiN coating Suitable for: M3 hex screws with allen head (cylindrical) M4 hex screws with countersunk head M4 hex screws with button head

59,-

KJØP
This is the Connecting Rod for the Traxxas 2.5 and 3.3 Engine.  This part connects the piston to the crankshaft.     FEATURES Aluminum construction  Pre-installed bushing   INCLUDES One connecting rod   REQUIREMENTS Installation into engine.   SPECIFICATIONS  Length: 37mm (1.46")  Thickness: 3mm (0.12")

399,-

449,-

KJØP
-11%
  These are the Traxxas Pro-Trax 2.2 Rear Tires with Inserts. FEATURES: Spiked tread design, soft compound rubber construction INCLUDES: Two Traxxas Pro-Trax 2.2 Rear Tires with Foam Inserts REQUIRES: 2.2 rear buggy wheels SPECS:    Width: 2.2" (56mm)           Inner Diameter: 2.1" (53mm)           Outer Diameter: 3.7" (95mm)

219,-

Ikke på lager
RPM Rear Bearing Carriers for Hoss 4x4, Slash 4×4, Rustler 4×4, Telluride, Nitro Slash & Stampede 4×4 Replaces Traxxas stock #1952 & #1952X Quick Notes: Fits the Traxxas Slash 4×4, Rustler 4×4, Hoss 4×4, Telluride, Nitro Slash, Stampede 4×4, Nitro Rustler, Nitro Stampede & Nitro Sport Replaces Traxxas stock #1952 & #1952X Requires 2 – 5x11x4mm bearings (not included) Let’s face it: breaking parts sucks! When a part fails, the day is over. Not when your ride is equipped with RPM performance parts! Our newest muscle-laden product is a rear bearing carrier for the Slash 4×4, Rustler 4×4, Telluride, Nitro Slash & Stampede 4×4. The stock version simply can’t handle hardcore carnage like RPM products can. Our version is 100% stock geometry-perfect, but with a few tweaks to improve durability significantly. A ring surrounds the bearing bores, providing additional rigidity while a redesigned camber rod mounting boss helps disperse impact energy more evenly throughout the length of the carrier’s arm. Additionally, the bearing bores in our bearing carriers are designed to hold the bearings tight, meaning absolutely no bearing slop in the bearing bores! We also reduced the end-play of the axles by approximately 1/64”, keeping your rear end tracking perfectly like it’s supposed to. Obviously they wouldn’t be perfect without our trademark blend of RPM nylons that make our products so indestructible. Our carriers are so strong (like all RPM molded products) that we back them with a limited lifetime warranty against breakage! While we designed these bearing carriers with the Traxxas Slash 4×4 in mind, they are direct replacement parts for all of the following vehicles as well: Rustler 4×4, Stampede 4×4, Hoss 4×4, Telluride, Nitro Rustler, Nitro Stampede & Nitro Sport! If you’re tired of ending a fun day due to breakage, we’re here to solve that problem. Check us out; you’ll be glad you did! Tech Notes: RPM Rear Bearing Carriers replace Traxxas stock #1952 & #1952X. RPM Rear Bearing Carriers are sold without bearings

149,-

135,-

Ikke på lager
*** This is a Brand new item taken from a kit (chopped part), therefore will not have a Traxxas packaging ***   This is the Digital High Torque Servo for the Traxxas            E-Revo RTR ,Traxxas Slash and many other. FEATURES: Plastic blue three piece waterproof case INCLUDES: One Digital High Torque Servo with J style connector REQUIRES: Mounting into vehicle SPECS:    Length: 55mm (2.17")           Width: 20mm (0.79")           Height: 42.3mm (1.67")           Torque: 125 oz-in  (9kg-cm)           Speed: 0.16 sec @ 60°

459,-

589,-

Ikke på lager
-22%
This is the Front Bulkhead for the Traxxas Revo. FEATURES: Black plastic construction           Rocker shafts preinstalled INCLUDES: Front bulkhead halves Part #5330           (2) rocker shafts     Part #5354           (4) 4X14mm button head screws REQUIRES: Installation on the Traxxas Revo

185,-

KJØP
This is the Carrier Differential for the Traxxas Revo and E-Maxx. FEATURES: Replaces worn diff carriers gaskets and spacers INCLUDES: Diff Carrier and Gaskets, TRX 5381.           Steel Spider Gear Braces (not used with Revo)           Instruction sheet REQUIRES: Disassembly of differential, installing new parts and refilling with             modeler's choice of diff lube           10K TRX 5135                50K  TRX 5137           30K TRX 5136   stock weight       Complete set TRX 5136X

49,-

KJØP
This is the Front and Rear Differential Housing                        for the REVO from Traxxas. FEATURES: Durable black nylon construction INCLUDES: One diff housing (2 pieces)

49,-

KJØP
This is the Black Wing for the Traxxas Revo.                  This part attaches to the rear of the body. FEATURES: Plastic construction, black in color INCLUDES: One rear wing with decals REQUIRES: Installation on the Revo. SPECS:    Length: 8" (203.2mm)           Width: 3" (76.2mm)

189,-

KJØP
These are the replacement Drive Shaft Boots for                     the Traxxas Nitro Revo Monster Truck. FEATURES: Rubber Construction           Blue in Color INCLUDES: Two Blue Rubber Driveshaft Boots REQUIRES: Assembly onto Vehicle  

29,-

39,-

KJØP
-26%
RC lys-sett med 10 lys dioder. Består av 6 stk 5mm LED. 2 stk røde og 4 stk hvite for forlys og baklys. Og 2 stk 3mm LED – gule Det er en microbryter for å skru av og på. For drift biler, onroad, Crawler etc etc Bare fantasien setter stopper. 

199,-

219,-

KJØP
-9%
Traxxas 8864 Winch Line Grey Winch Line - Grey

139,-

149,-

KJØP
-7%
Hitec S Heavy Duty High Channel Switch Harness With RX Charger

189,-

KJØP
This is a 6" Long, Heavy Duty Y-Harness with Hitec S, JR, Airtronics Z Connectors. Features     Hitec 54701S Y-Harness 6"     Gold-plated teminals improve conductivity and prevent oxidation for     longer lifespan.     Heavier, 20-gauge wire handles higher current loads. Specifications     Fork in "Y" occurs 2" from the receiver connector     Overall Length: 6"     Connectors: one male and two female Contents     One 6" Long, Heavy Duty Y-Harness with Hitec S, JR, Airtronics Z Connectors

89,-

109,-

KJØP
-18%
This is the Motor and Gearbox for the RC4C 1/10 scale Warn 9.5cti Winch. FEATURES Assembled and ready to install INCLUDES Motor and Gearbox for the RC4C 1/10 scale Warn 9.5cti Winch SPECIFICATIONS Reduction Ratio: 1:380 Final Output: 52 RPM Total Length: 1.41in (36mm) Weight: 0.35oz (10g)

129,-

KJØP
This is the Differential Gear Set for the Traxxas Revo and E-Maxx. And Summit. FEATURES: Steel construction INCLUDES: Two Output Gears           Two Spider Gears           Spider Gear Shaft and Diff Carrier Support           Instruction Sheet REQUIRES: Diff lube;           10K weight TRX 5135           50K weight   TRX 5137                    30K weight TRX 5136           Multi-weight set  TRX 5136X

199,-

219,-

KJØP
-9%
This is an optional Bearing Adapter for the Slash 4X4. FEATURES: 6061-T6 anodized blue aluminum construction           Steel 10x15x4mm ball bearing with blue rubber seal           Used on slipper shaft INCLUDES: One aluminum adapter           One 10x15x4mm ball bearing REQUIRES: Installation on to slipper shaft           Remaining clutch pieces

69,-

KJØP
This is the Locking Differential Ouput Gear for use on the                      Traxxas Summit Truck RTR. FEATURES: Steel construction INCLUDES: One Locking Differential Output Gear           One Differential Slider           One 3x12mm Screwpin REQUIRES: Installation on the vehicle  

149,-

169,-

KJØP
-12%
Bearing adapter, 6061-T6 aluminum (green-anodized) (1)/ 10x15x4mm ball bearing (black rubber sealed) (1) (for slipper shaft)

69,-

KJØP
Micro switch harness with 4 AAA Battery box

85,-

KJØP
This is an optional Wheelie Bar in Blue for the Traxxas                    Electric Stampede, Rustler and Bandit. FEATURES: Constructed of hardened plastic, blue in color           Installs at rear of chassis to prevent vehicle from flipping over             during wheelies INCLUDES: Assembled optional Wheelie Bar with mounting instructions and             hardware REQUIRES: Fastening to rear of chassis

179,-

KJØP
Gear set (for 2070, 2075 servos)

49,-

KJØP
These are Optional Blue Anodized Aluminum Wheel Hex Hubs for Traxxas vehicles      such as the Stampede, Rustler, 4-Tec, and other older Traxxas kits. FEATURES: Blue aluminum construction INCLUDES: Two hex hubs           Four axle pins REQUIRES: Assembly onto axles. SPECS:    Hex Length: 12mm (.47")           Hex Thickness: 6.1mm (.24")           Axle Pin Length: 9.6mm (.38") COMMENTS: These hubs could be used with other vehicles utilizing the same             pin/hex design.  These hubs Will Not work on the T-Maxx or E-Maxx.

109,-

KJØP
These are Replacement Washers from Traxxas. FEATURES: Black teflon construction.           Used on the axles and in the transmission. INCLUDES: (20) Washers SPECS:    Size:      5x8mm           Thickness: 0.5mm

29,-

KJØP
Tires & wheels, assembled, glued (SCT satin chrome, beadlock style wheels, Kumho tires, foam inserts) (2) (4WD front/rear, 2WD rear only)

299,-

329,-

KJØP
-9%
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png