Hopp til innhold

Verktøy/Lakk/Lim

Art.nr: HOT00012T
Copied
En pakke med to små flasker gjengelim, begge flaskene er av type blå som er den svakeste teadlocken. Brukes på skruer for å forhindre at de løsner.

69,-

** Ikke på lager
KJØP
Art.nr: CWQ01
Copied
he Deko Tools CWQ01 pyrometer is an extremely useful and easy-to-use device. It can measure the temperature of many different objects without contact and has a response time of just 0.5s. The D:S 12:1 optics ensure precision when measuring, and with a temperature range of -50 ℃ to 400 ℃, the device is suitable for both domestic and industrial use. For power supply, 2 AAA batteries are sufficient. The Deko Tools CWQ01 pyrometer is distinguished by its fast response time (0.5s) and wide temperature range (from -50 ℃ to 400 ℃). It enables safe, non-contact temperature measurement with an accuracy of 1.5 ℃ above zero and 3 ℃ below zero. The built-in display makes it convenient to read the values. The Deko Tools CWQ01 pyrometer will serve to measure temperature in many different situations. With a range from -50 ℃ to 400 ℃, the device allows you to check the temperature of boiled water in a kettle, a computer case or machine parts without contact. Its emissivity is 0.95 and is a constant value.   Specification: Manufacturer: Deko Tools Name: Pyrometer Deko Tools CWQ01 Model: CWQ01 Temperature range: from -50 ℃ to 400 ℃

269,-

289,-

På lager 1
KJØP
-7%
Art.nr: 2440005
Copied
Maskeringsteip, 4mm bred. Lengde per rull: 10 meter.

49,-

** Ikke på lager
KJØP
Art.nr: 2440009
Copied
Absima 2440009 DOUBLE FACED ADHECSIVE TAPE 10mx25mm En super sterk dobbel side tape. Super strong Bredde: 25mm Lengde pr rull: 10.0m

89,-

** Ikke på lager
KJØP
Art.nr: 3000048
Copied
Holder kontaktene for deg mens du lodder. Mye lettere å jobbe med enn med tradisjonelle loddestativer. Støtter XT60, XT90, T-plug(Deans), Mini T-plug(Mini Deans) og gullkontakter fra 2.0mm til 10.4mm.   Fra produsenten: Material: Aluminum Fits for different plugs: TX60, XT90, T-plug (Deans), Mini T-plug & gold-bonded plugs 2.0 – 10.4mm Color: red Measure (L/W/H): 110 x 60 x 15 mm

299,-

** Ikke på lager
KJØP
Art.nr: 3000045
Copied
Features: √ 6 different types of tools for every professional model builder √ Made of the finest materials √ High grade steel √ Handle made of synthetic material in a comfortable size √ Colored end caps for easy identification Specification:   ● 1 pcs. 1.5mm allen wrench ● 1 pcs. 2.0mm allen wrench ● 1 pcs. 2.5mm allen wrench ● 1 pcs. 5.5mm nut socket driver ● 1 pcs. 7.0mm nut socket driver ● 1 pcs. 5.0mm phillips screw driver Length: ● Allen wrench:  197mm ● Nut socket driver: 197mm ● Phillips screw driver: 190mm Ø Handle: 30mm

479,-

499,-

** Ikke på lager
KJØP
-4%
Art.nr: 1600-0307
Copied
ANSMANN IL500R Professional work light with latest SMD LED technology Additional spotlight in lamp head Robust plastic housing with rubberized surface 180° rotatable lamp handle, (in 8 steps), for flexible lighting alignment Two foldable and 360° rotatable hooks at the back Two magnets at the back of the housing and one magnet at the bottom of the handle Impact protected Li-Ion battery pack (3.7V / 2200mAh) Charging via USB power supply (5V / 1000mA) or car adapter (12-24V) supplied Charge control indication via duo LED Illumination 555 Lux / 1m Luminous flux 325 Lumens (main light) / 110 Lumens (additional spotlight) Lighting duration approx. 3,5 hours / 9 hours Charging time: approx. 3 hours

569,-

599,-

På lager 1
KJØP
-5%
Art.nr: AM199900
Copied
AM Premium Precision Screwdriver Set With Alu Case (24 in 1) Black Arrowmax's Premium Precision Screwdriver set comes in 24 different tips. The purpose-built screwdriver has a non-slip rectangular handle, 360 rotating cap and magnetized tips. It is made suitable for Mini Z and any Min cars as well as installing and dismantling 3C (Computer, communications, consumer-electronics) products.

239,-

** Ikke på lager
KJØP
Art.nr: 6588
Copied
This is ASSOCIATED Stealth black grease for use in the Stealth transmission. FEATURES: Black in color           Comes in a plastic recloseable cylinder shaped container SPECS:    Contains approximatly 1/2 oz. of grease COMMENTS: This grease is for the thrust balls ONLY (NOT the differential balls)

59,-

** Ikke på lager
KJØP
Art.nr: 65-10088
Copied
Praktisk verktøy for innsetting og uttak av kulelager. Er tilpasset for 2, 3 , 4, 5 , 6 , 8 , 9 , 10 , 12, 14mm

139,-

** Ikke på lager
KJØP
Art.nr: BDTP-10063
Copied
Bittydesign Table Pad (100x63cm) The Bittydesign Table Pad is the perfect accessory to give at your box area the best look. Modern graphic, multiple colors, original logo in the corner and our company's theme on the background. High quality material, digital print of new generation and easy to clean surface with water at the end of your track day. Anti-slip surface on the back thanks to special rubber, size 100x63cm.

395,-

445,-

På lager 1
KJØP
-11%
Art.nr: BDTP-5141
Copied
Bittydesign Table Pad (51x41cm) The Bittydesign Anti-Slip Table Pad is the perfect accessory to give at your box area the best look. Modern graphic, multiple colors, original logo and our company's new 2017 theme on the background. High quality materials and durable surface thanks to a resistant anti-scratch pvc sheet. The small Table Pad has been designed in term of size (51x41cm) to fit perfectly a 1/10 model (On and Off-road) and a 1/8 buggy chassis.

249,-

** Ikke på lager
KJØP
Art.nr: BD-LM16
Copied
Bittydesign Liquid Mask 16oz/473ml Compared to the traditional but now obsolete tape paper, aspects and advantages of our Masking Liquid are easily found: Incredible time savings, the drawing up of liquid is really fast Possibility to easily reach every point on the surface of the body, even the edges and areas where the lexan has articulated forms Less usury of the cutting blade of your precision cutter Greater cutting precision due to the fact that the liquid, once dried, is semi-transparent and facilitates a lot the possibility to follow the lines of your drawing No residue when removing the liquid (it may happen, however, if you continue to use an inadequate tape paper that after the removal of adhesive some glue residues remain on the surface of airbrushing; with Liquid Mask this will never happen) Greater accuracy of airbrushing, with our liquid the color smear are no longer a problem Product Features: The Liquid Mask is is ready to use, you not need to dilute it It is water-based withour solvent, not harmful to health. You can safely use it even at home Dries quickly when subjected to a jet of hot air Once the package is opened, if stored properly it can last for several months With the 16oz format you can prepare about 20 buggy 1/8 bodies and about 12/13 1/10 touring bodies; with the 32oz bottle double quantities Works perfect together with all our Hobbynox Airbrush Colors! Video Tutorial: Here you find 3 practical video 'Tutorial' that explains step by step how to use at best our special liquid from the preparation of the body to the drafting of the Liquid Mask and finally the multiple steps of airbrushing, all you need to know is explained in detail. Good vision!

279,-

299,-

På lager 1
KJØP
-7%
Art.nr: BD-LM32
Copied
Bittydesign Liquid Mask 32oz/946ml Compared to the traditional but now obsolete tape paper, aspects and advantages of our Masking Liquid are easily found: Incredible time savings, the drawing up of liquid is really fast Possibility to easily reach every point on the surface of the body, even the edges and areas where the lexan has articulated forms Less usury of the cutting blade of your precision cutter Greater cutting precision due to the fact that the liquid, once dried, is semi-transparent and facilitates a lot the possibility to follow the lines of your drawing No residue when removing the liquid (it may happen, however, if you continue to use an inadequate tape paper that after the removal of adhesive some glue residues remain on the surface of airbrushing; with Liquid Mask this will never happen) Greater accuracy of airbrushing, with our liquid the color smear are no longer a problem Product Features: The Liquid Mask is is ready to use, you not need to dilute it It is water-based withour solvent, not harmful to health. You can safely use it even at home Dries quickly when subjected to a jet of hot air Once the package is opened, if stored properly it can last for several months With the 16oz format you can prepare about 20 buggy 1/8 bodies and about 12/13 1/10 touring bodies; with the 32oz bottle double quantities Works perfect together with all our Hobbynox Airbrush Colors! Video Tutorial: Here you find 3 practical video 'Tutorial' that explains step by step how to use at best our special liquid from the preparation of the body to the drafting of the Liquid Mask and finally the multiple steps of airbrushing, all you need to know is explained in detail. Good vision!

419,-

439,-

** Ikke på lager
KJØP
-5%
Art.nr: Velcro10cm
Copied
Borrelås 10 cm han og hun.

10,-

** Ikke på lager
KJØP
Art.nr: 7017
Copied

69,-

** Ikke på lager
KJØP
Art.nr: 7017B
Copied

69,-

På lager 3
KJØP
Art.nr: 908113
Copied
Removes any polycarbonate and acrylic paints from bodies, diecas and plastic models without damaging the surface underneath.

199,-

Kontakt oss for mer informasjon om dette produktet
Ikke på lager
Art.nr: 500908133
Copied
CARSON-MODELL SPORT Fighter bag i TAMIYA verdensmester team design. Mål B / H / D: 64/29/36 cm 

569,-

599,-

** Ikke på lager
KJØP
-5%
Art.nr: 908135
Copied
RC Car Bag 1:10 Tamiya Design   Innvendig mål.   Lengde 43.5cm Bredde 26,5cm Høyde  12cm   Utvendige mål:   Lengde 45,5cm Bredde 28,5cm Høyde  13,5cm

349,-

379,-

På lager 1
KJØP
-8%
Art.nr: 908141
Copied
Removes any polycarbonate and acrylic paints from bodies, diecas and plastic models without damaging the surface underneath.

295,-

** Ikke på lager
KJØP
Art.nr: 908206
Copied

99,-

** Ikke på lager
KJØP
Art.nr: 13447
Copied
The perfect tool for getting into those hard to reach places. Ball wrenches make it possible to turn socket head screws or bolts from various angles. Ball End inserts into screw at a 25º angle Ergonomic handle design Non-slip grip Two component handle with tough inner core and cushioned rubber exterior Anti-roll design Set contains one each of : 5/64, 3/32, 7/64, 9/64, and 5/32.

499,-

På lager 1
KJØP
Art.nr: 116
Copied
Dubro 116 Nylon hinge std (6) Standard Hinge measurements: 5/8" (16 mm) Wide X 1 1/8" (28 mm) Long. Weight: 0.5 grams / hinge. Precision molded, inspected and assembled with locked in hinge pin. Flash free, simple to install. Hinges have 6 holes on each side for maximum holding power.

49,-

** Ikke på lager
KJØP
Art.nr: 118
Copied
Small Nylon Hinge(6ps)

49,-

** Ikke på lager
KJØP
Art.nr: 119
Copied
DUBRO 119 - Small Nylon Hinge (15 per pkg) Mini Hinge measurements: 7/16" (11 mm) wide X 1 1/8" (28 mm) Long. Weight: 0.2 grams / hinge. Precision molded, inspected and assembled with locked in hinge pin. Flash free, simple to install. Hinges have 6 holes on each side for maximum holding power.

89,-

** Ikke på lager
KJØP
Art.nr: 13205
Copied
4-40 STEEL ROD END ASSEMBLY Perfect for many 1/4 scale applications, including strut attachments, flying wires, tailfin stab bracing, and bi-plane aileron connectors. Heavy duty steel and nickel plated. Includes: 2 ea Threaded Rods Ends  2 ea. solder rod ends 4 ea #202 Steel Straps 2 ea 12" long .093" diameter rod with 3/4" 4-40 Thread 4 each 4-40 x 1/4" screws, and 4 each 4-40 nuts (QTY/PKG: 2 assemblies ). Weight: 41 grams/assembly

199,-

** Ikke på lager
KJØP
Art.nr: 13302
Copied
4-40 ROD ENDS Perfect for many scale applications, including strut attachments, flying wires, tailfin stab bracing, and bi-plane aileron connectors. Heavy duty steel and nickel plated. Includes screws and hex nuts. For use with .093 diameter (4-40) threaded rods. 2/pkg. Weight: 2.5 grams/assembly

99,-

** Ikke på lager
KJØP
Art.nr: DTXC2379
Copied
Key Features Constructed of sturdy, high-impact polystyrene with aluminum center post Wide reinforced base and tall center post is ideal for monster trucks and 1/8 scale buggies and truggies Rotating top plate with dropped center section to accomodate models with uneven chassis Molded rubber strips on upper plate grips chassis securely Easily accessible extra-large parts tray Disassembles to store flat when not in use, or to take to the track   Includes Pit Tech Deluxe Truck Stand in Black from Duratrax

299,-

** Ikke på lager
KJØP
Art.nr: DTXC2380
Copied
This is the Pit Tech Deluxe Truck Stand in Blue from Duratrax. FEATURES Constructed of sturdy, high-impact polystyrene with aluminum center post Wide reinforced base and tall center post is ideal for monster trucks and 1/8 scale buggies and truggies Rotating top plate with dropped center section to accomodate models with uneven chassis Molded rubber strips on upper plate grips chassis securely Easily accessible extra-large parts tray Disassembles to store flat when not in use, or to take to the track INCLUDES Pit Tech Deluxe Truck Stand in Blue from Duratrax SPECIFICATIONS Length: 10" (254mm) Width: 8" (203mm) Height: 4.8" (121mm)       (16)

295,-

** Ikke på lager
KJØP
Art.nr: DMC0031
Copied
Dusty Motors Dust Protection Cover for Traxxas Slash 4x4 (HCG Chassis) - Black DMC0031 This is a high quality, hand made, dust and water splash proof shroud, designated to fit a particular model. Shroud comes with a zipper, which allows to access the internals of a model i.e. connecting/disconnecting  batteries and turning a model on/off without removing a shroud. While taking a break between the running  stints the shroud can be unzipped to allow ESC and motor to cool quicker.  Shroud is made from the highest quality materials. That is why it is strong, durable and efficient. The open  area of a material is more than 50% of total shroud surface, so it ensures a very good airflow in order to keep the model electronics cool. Shock absorber cover is included into the package. Shock absorber cover comes in one long piece, so it could be cut into lengths that particular shock absorbers require. Cover is made from elastic material in order to fit shock absorbers of different diameters. One included length of a cover will be enough for 4-8 shock absorbers, depending on a length of one.

359,-

409,-

** Ikke på lager
KJØP
-12%
Art.nr: DMC0051
Copied
Fits: Traxxas Slash 4x4 with LCG chassis and 1/10 Rally only. Scale: 1/10 Color: Black This is a high quality, hand made, dust and water splash proof shroud, designated to fit a particular model. Shroud comes with a zipper, which allows to access the internals of a model i.e. connecting/disconnecting  batteries and turning a model on/off without removing a shroud. While taking a break between the running  stints the shroud can be unzipped to allow ESC and motor to cool quicker.  Shroud is made from the highest quality materials. That is why it is strong, durable and efficient. The open  area of a material is more than 50% of total shroud surface, so it ensures a very good airflow in order to  keep the model electronics cool. Shock absorber cover is included into the package. Shock absorber cover comes in one long piece, so it could be cut into lengths that particular shock absorbers require. Cover is made from elastic material in order to fit shock absorbers of different diameters. One included length of a cover will be enough for 4-8 shock absorbers, depending on a length of one.   DMC 0051 TRX0051

379,-

** Ikke på lager
KJØP
Art.nr: DMC0061
Copied
Fits: Traxxas Stampede 4x4 and Telluride 4x4 Rustler 4x4 and Hoss Color: Black   This is a high quality, hand made, dust and water splash proof shroud, designated to fit a particular model. Shroud comes with a zipper, which allows to access the internals of a model i.e. connecting/disconnecting  batteries and turning a model on/off without removing a shroud. While taking a break between the running  stints the shroud can be unzipped to allow ESC and motor to cool quicker.  Shroud is made from the highest quality materials. That is why it is strong, durable and efficient. The open  area of a material is more than 50% of total shroud surface, so it ensures a very good airflow in order to  keep the model electronics cool. Shock absorber cover is included into the package. Shock absorber cover comes in one long piece, so it could be cut into lengths that particular shock absorbers require. Cover is made from elastic material in order to fit shock absorbers of different diameters. One included length of a cover will be enough for 4-8 shock absorbers, depending on a length of one.

369,-

** Ikke på lager
KJØP
Art.nr: DMC0071
Copied
Fits: Traxxas Rustler/Bandit models only. Color: Black This is a high quality, hand made, dust and water splash proof shroud, designated to fit a particular model. Shroud comes with a zipper, which allows to access the internals of a model i.e. connecting/disconnecting  batteries and turning a model on/off without removing a shroud. While taking a break between the running  stints the shroud can be unzipped to allow ESC and motor to cool quicker.  Shroud is made from the highest quality materials. That is why it is strong, durable and efficient. The open  area of a material is more than 50% of total shroud surface, so it ensures a very good airflow in order to  keep the model electronics cool. Shock absorber cover is included into the package. Shock absorber cover comes in one long piece, so it could be cut into lengths that particular shock absorbers require. Cover is made from elastic material in order to fit shock absorbers of different diameters. One included length of a cover will be enough for 4-8 shock absorbers, depending on a length of one.

379,-

** Ikke på lager
KJØP
Art.nr: DMC0081
Copied
Fits: Traxxas Slash 2WD With HCG Chassis only. Color: Black This is a high quality, hand made, dust and water splash proof shroud, designated to fit a particular model. Shroud comes with a zipper, which allows to access the internals of a model i.e. connecting/disconnecting  batteries and turning a model on/off without removing a shroud. While taking a break between the running  stints the shroud can be unzipped to allow ESC and motor to cool quicker.  Shroud is made from the highest quality materials. That is why it is strong, durable and efficient. The open  area of a material is more than 50% of total shroud surface, so it ensures a very good airflow in order to  keep the model electronics cool. Shock absorber cover is included into the package. Shock absorber cover comes in one long piece, so it could be cut into lengths that particular shock absorbers require. Cover is made from elastic material in order to fit shock absorbers of different diameters. One included length of a cover will be enough for 4-8 shock absorbers, depending on a length of one.

329,-

** Ikke på lager
KJØP
Art.nr: DMC0091
Copied
Fits: Traxxas Slash 2WD with LCG chassis only. Color: Black This is a high quality, hand made, dust and water splash proof shroud, designated to fit a particular model. Shroud comes with a zipper, which allows to access the internals of a model i.e. connecting/disconnecting  batteries and turning a model on/off without removing a shroud. While taking a break between the running  stints the shroud can be unzipped to allow ESC and motor to cool quicker.  Shroud is made from the highest quality materials. That is why it is strong, durable and efficient. The open  area of a material is more than 50% of total shroud surface, so it ensures a very good airflow in order to  keep the model electronics cool. Shock absorber cover is included into the package. Shock absorber cover comes in one long piece, so it could be cut into lengths that particular shock absorbers require. Cover is made from elastic material in order to fit shock absorbers of different diameters. One included length of a cover will be enough for 4-8 shock absorbers, depending on a length of one.

399,-

** Ikke på lager
KJØP
Art.nr: DMC0101
Copied
Traxxas X-Maxx Protection cover (shock covers not included) Fits: Traxxas X-Maxx only. Color: Black This is a high quality, hand made, dust and water splash proof shroud, designated to fit a particular model. Shroud comes with a zipper, which allows to access the internals of a model i.e. connecting/disconnecting  batteries and turning a model on/off without removing a shroud. While taking a break between the running  stints the shroud can be unzipped to allow ESC and motor to cool quicker.  Shroud is made from the highest quality materials. That is why it is strong, durable and efficient. The open  area of a material is more than 50% of total shroud surface, so it ensures a very good airflow in order to  keep the model electronics cool.

399,-

439,-

** Ikke på lager
KJØP
-9%
Art.nr: DMC0111
Copied
LaTrax Rally/SST/Teton Chassis Protective Cover (shock covers not included) Fits: LaTrax Rally/SST/Teton only. Color: Black This is a high quality, hand made, dust and water splash proof shroud, designated to fit a particular model. Shroud comes with a zipper, which allows to access the internals of a model i.e. connecting/disconnecting  batteries and turning a model on/off without removing a shroud. While taking a break between the running  stints the shroud can be unzipped to allow ESC and motor to cool quicker.  Shroud is made from the highest quality materials. That is why it is strong, durable and efficient. The open  area of a material is more than 50% of total shroud surface, so it ensures a very good airflow in order to  keep the model electronics cool.

349,-

** Ikke på lager
KJØP
Art.nr: DMC0121
Copied
Dusty Motors 0121 Dust Protection Cover for Traxxas Unlimited Desert racer Black

379,-

På lager 1
KJØP
Art.nr: DMC0131
Copied
 Traxxas Maxx Protection cover (shock covers not included) Black color.

399,-

På lager 3
KJØP
Art.nr: TRX0201
Copied
Dusty Motors 0201 Protection Cover for Traxxas XRT Dusty Motors beskyttelsestrekk i svart for Traxxas XRT. Beskyttelsestrekk til demperne følger ikke med. Dusty Motors beskyttelsestrekk er laget for å holde innsiden av din radiostyrte bil så ren som mulig. Utrustet med glidelås for enkel tilgang til elektronikken.     Product details in english This is a high quality, hand made, dust and water splash proof shroud, designated to fit a particular model. Shroud comes with a zipper, which allows to access the internals of a model i.e. connecting/disconnecting batteries and turning a model on/off without removing a shroud. While taking a break between the running stints the shroud can be unzipped to allow ESC and motor to cool quicker. Shroud is made from the highest quality materials. That is why it is strong, durable and efficient. The open area of a material is more than 50% of total shroud surface, so it ensures a very good airflow in order to keep the model electronics cool. Make sure that the surface of the chassis is extremely dry and clean before applying the VELCRO® tape. Dip a napkin in pure alcohol and clean the surface of the chassis. (Use vodka if you like, but for best results, do not drink the vodka during the process). Let the VELCRO® tape adhere to the chassis for 24 hours before you use the shroud. If it?s hot outside, leave the Dusty Motors? shroud unzipped to promote airflow and help keep the electronics cool. Even when bashing with a unzipped shroud, it will still keep out most of the dust and debris. When it?s hot outside ? or if you have a car gearing set up that?s capable of reaching the speed of light ? be smart when you bash. Don?t let the temperature of the electronics get too hot. Take breaks between rides. Unzip the shroud and let the model cool to a normal temperature. When bashing in winter, don?t bring your model into a warm room without removing ice and snow from the shroud. Otherwise, the snow will melt and water may penetrate the shroud and get into your model electronics. Do not drive under water. It is a CAR, not a submarine, and the Dusty Motors shroud is only made for cars. Our shrouds are good, but they can?t be breathable and 100 percent waterproof at the same time. Physics just doesn?t work that way. The splashes of water are OK, so don?t be concerned if the shroud gets a bit damp. Remember to take care of the shroud. Wash it by hand with warm, clean water. Let it air dry, do not put it in a dryer.

599,-

619,-

På lager 1
KJØP
-3%
Art.nr: DMC0221
Copied
DUSTY MOTORS PROTECTION COVER FOR TRAXXAS MAXX SLASH BLACK

579,-

599,-

** Ikke på lager
KJØP
-3%
Art.nr: DMC1001
Copied
Velcro tape hook part 1 meter

79,-

På lager 2
KJØP
Art.nr: DMC1003
Copied
Borrelås, hankjønn. Til å teipe på siden av bilen for å få festen selve dust coverene. Lengde:  3 meter Bredde: 16mm

95,-

** Ikke på lager
KJØP
Art.nr: DMC1010
Copied
Fits: Axial, HPI, Kyosho, LOSI, Mugen, Ofna, Tamiya, Team Associated, Tekno, Thunder Tiger, Traxxas, XRay etc. Width: 31 centimeters or 12.2 inches Length: 24 centimeters or 9.5 inches

389,-

** Ikke på lager
KJØP
Art.nr: DMC1011
Copied
Fits: Axial, HPI, Kyosho, LOSI, Mugen, Ofna, Tamiya, Team Associated, Tekno, Thunder Tiger, Traxxas, XRay etc. Width: 28 centimeters or 11 inches Length: 21 centimeters or 8.3 inches

389,-

** Ikke på lager
KJØP
Art.nr: DMC1012
Copied
Fits: Axial, HPI, Kyosho, LOSI, Mugen, Ofna, Tamiya, Team Associated, Tekno, Thunder Tiger, Traxxas, XRay etc. Width: 32 centimeters or 12.6 inches Length: 27 centimeters or 10.6 inches

389,-

På lager 1
KJØP
Art.nr: DMC1014
Copied
Universal Adjustable Protection Cover Size L Fits: Axial, HPI, Kyosho, LOSI, Mugen, Ofna, Tamiya, Team Associated, Tekno, Thunder Tiger, Traxxas, XRay etc. Width: 33 centimeters or 13 inches Length: 33 centimeters or 13 inches

399,-

Kontakt oss for mer informasjon om dette produktet
Ikke på lager
Art.nr: DMC1015
Copied
Passer veldig bra på Traxxas Sledge. Fits: Axial, HPI, Kyosho, LOSI, Mugen, Ofna, Tamiya, Team Associated, Tekno, Thunder Tiger, Traxxas, XRay etc. Width: 36 centimeters or 14.2 inches Length: 36 centimeters or 14.2 inches

399,-

** Ikke på lager
KJØP
Art.nr: DMC1016
Copied
Fits: Axial, HPI, Kyosho, LOSI, Mugen, Ofna, Tamiya, Team Associated, Tekno, Thunder Tiger, Traxxas, XRay etc. Width: 39 centimeters or 15.4 inches Length: 39 centimeters or 15.4 inches

389,-

** Ikke på lager
KJØP
Viser 1 til 50 (av 1131 produkter)
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png