Hopp til innhold
Hjem / Verktøy/Lakk/Lim / Dusty Motors / Dusty Motors 1010 Universal S+ Adjustable Protection Cover Size

Dusty Motors 1010 Universal S+ Adjustable Protection Cover Size

Art.nr: DMC1010

389,-

Dusty Motors

Dusty Motors
** Ikke på lager

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Fits: Axial, HPI, Kyosho, LOSI, Mugen, Ofna, Tamiya, Team Associated, Tekno, Thunder Tiger, Traxxas, XRay etc.
Width: 31 centimeters or 12.2 inches
Length: 24 centimeters or 9.5 inches

Produsent

Dusty Motors

Dusty Motors

Range of shroud covers by model:

  • Traxxas models: Stammpede 4×4 VXL, Telluride 4×4, Slash 4×4, Slash 2WD, E-Revo/Summit, 1/10 Rally, E-Maxx, Rustler/Bandit and all 1/16 scale models
  • Thunder Tiger models: 1/8 scale MT4-G3, ER4-G3, ST4-G3
  • HPI models: 1/8 Savage Flux HP

Kunder kjøpte også

Hovedbilde RPM 80402 Shock Shaft Guard Black Traxxas (4)
RPM 80402 Shock Shaft Guard Black Traxxas (4)
Shock Shaft Guards for Traxxas & Durango 1/10th Scale Shocks Quick Notes: – fits Traxxas 1:10 scale Ultra and “Big Bore” shocks – fits Durango 1:10 scale shocks Description Rocks, dirt and debris striking shock shafts lead to dents, dings and burrs, which in turn, leads to torn shock seals. Torn shock seals means leaky shocks and poor shock performance. RPM Shock Shaft Guards shield the shock shaft from those deteriorating elements, prolonging the life of the shock shaft, which improves the long-term performance of the suspension and in turn, prolongs the time between shock rebuilds! RPM Shock Shaft Guards are a simple design, replacing your stock shock spring cup with one that has a thin but tough shield rising up to the base of the shock body, completely blocking debris from striking the shock shaft. The back and sides are open, which prevents debris from building inside the guard as well. The kit comes with replacement oversized shock rod ends, improving durability and consistency on the shock pivot ball. Additionally, we redesigned the top of the rod end so it is square. That square end keys the shock shaft guard for directional control. The front shield of the guard covers over 100 degrees of frontal exposure! RPM Shock Shaft Guards are zero friction protection devices, meaning the guard never touches the working elements of the shock. RPM Shock Shaft Guards are sold in sets of four, including four rod ends for the shocks and are stock replacement items. Nothing more is needed for installation. Check out this partial list of vehicles they will fit: Slash 2wd, Slash 4×4, Stampede 4×4, nitro and electric versions of the Stampede 2wd and Rustler, Bandit, Nitro Sport, T-Maxx & E-Maxx (see tech notes below), and many more including vintage and legacy models. RPM Shock Shaft Guards are available in Black, Green, Blue and our Dyeable White materials.  Tech Notes: RPM Shock Shaft Guards fit all Traxxas 1/10th scale molded shocks as well as Traxxas Big Bore shocks but will not fit the Traxxas Jato or GTR shocks. They fit the T-Maxx and E-Maxx but will not work with RPM T/E-Maxx A-arms due to clearance limitations on the upper arm.    

129,-

149,-

KJØP
-13%
Hovedbilde Traxxas 7447 Spring Shock White GTR XX-Long 0.884 Pink ...
Traxxas 7447 Spring Shock White GTR XX-Long 0.884 Pink ...
   This is the set of Traxxas Extra Extra Long GTR Shock Springs                     with 0.884 Pink Compression Rate. FEATURES: Steel construction, white in color           Dab of paint on end of spring indicates compression rate INCLUDES: Two Extra Extra Long 0.884 Pink Rate GTR Shock Springs SPECS:    Length: 2.2" (56mm)           Wire Diameter: 0.043" (1.1mm)

59,-

KJØP
Hovedbilde Traxxas 7445 Spring Shock White GTR Long 0.810 Pink ...
Traxxas 7445 Spring Shock White GTR Long 0.810 Pink ...
This is the set of Traxxas Long GTR Shock Springs                     with 0.810 Pink Compression Rate. FEATURES: Steel construction, white in color           Dab of paint on end of spring indicates compression rate INCLUDES: Two Long 0.810 Pink Rate GTR Shock Springs SPECS:    Length: 1.8" (45mm)           Wire Diameter: 0.043" (1.1mm)  

69,-

KJØP
Hovedbilde Robinson Racing 7854 Slipper Unit GEN3 54T Slash 4X4
Robinson Racing 7854 Slipper Unit GEN3 54T Slash 4X4
This is the optional Generation 3 54T Slipper Unit from Robinson Racing for the Traxxas Slash 4x4. FEATURES: Steel and aluminum construction INCLUDES: One High Performance Slipper Kit with: One 54T Spur Gear Aluminum Back Plate Hex Slipper Pad One 7x13mm Bearing One Aluminum Spacer One Brass Bushing REQUIRES: Installation on the vehicle SPECS:    Tooth: 56T Outer Diameter: 44.5mm (1.75") Inner Diameter: 5mm (0.20")       (11)

759,-

KJØP
Hovedbilde Traxxas 6730X Chassis Brace Kit Alu Blue Hovedbilde Traxxas 6730X Chassis Brace Kit Alu Blue
Traxxas 6730X Chassis Brace Kit Alu Blue
Increase chassis stiffness and impact-handling with the heavy-duty (HD) aluminum chassis brace designed for Slash 4X4 (equipped with low-CG chassis) and Rustler 4X4 models. Made from thick extruded aluminum, the oval-shaped brace increases torsional rigidity and stiffens the chassis to reduce flex. Brilliantly anodized in four high-impact colors, the HD chassis brace provides structural reinforcement for high loads and hard landings. Whether you’re sending it at the skate park, hitting the race track, or launching from a ramp, the heavy-duty chassis brace is built for extreme punishment. Chassis Brace Features: Thick extruded aluminum construction Four bright anodized colors Reduces chassis flex on hard landings Oval shape for increased torsional rigidity Fits Slash 4X4 low-CG models Fits all Rustler 4X4 models

299,-

KJØP
Hovedbilde RPM 70392 Front Shock Tower Slash/Stampede 4X4 Part ...
RPM 70392 Front Shock Tower Slash/Stampede 4X4 Part ...
RPM Front Shock Tower for Slash 4×4, Stampede 4×4, Telluride & Rally Quick Notes: Replaces stock Traxxas #6839 Fits the Traxxas Slash 4×4, Stampede 4×4, Telluride & Rally Matching Rear Shock Tower also available RPM is proud to introduce our front and rear shock towers for the Traxxas Slash 4×4, Stampede 4×4, Telluride & Rally. These shock towers are designed to take some serious abuse without failing because nothing is worse than having a part break when you’re out having a fun day, whether it’s at the local track or at your favorite place to bash. Structurally, RPM shock towers are about as strong as they can be, keeping your suspension moving freely without added flex. However, under extreme crash situations, the nature of our proprietary materials allows it to give slightly, absorbing that impact energy to prevent damage to the shock tower and reduce the amount of transferred shock energy to the more fragile differential cases. Our material then returns back to its original shape almost instantly. No other material can do that! Additionally, RPM shock towers retain the large dust cover ribs that overlap the tops of the differential case, providing an extra layer of protection against dirt and grit not found on many aftermarket shock towers. RPM Shock Towers for the Traxxas Slash 4×4, Stampede 4×4, Telluride & Rally are stock replacement parts, molded in black.

149,-

KJØP
Hovedbilde RPM 80702 Front or Rear A-arms for the Traxxas Slash ...
RPM 80702 Front or Rear A-arms for the Traxxas Slash ...
Front or Rear A-arms for the Traxxas Slash 4×4, Stampede 4×4, Rustler 4×4, Hoss 4×4 & Rally Replaces TRX 3655R & 3655X Quick Notes: Fits the 1/10 versions of the Slash 4×4, Stampede 4×4, Hoss 4×4 & Rally 4×4 Does not fit the Rally ST (please see RPM #73362) Each a-arm is 6.5 grams lighter than stock*! 2 packages is needed to complete one full vehicle (front & rear) Replaces stock Traxxas #3655R & #3655X RPM A-arms for the Traxxas Slash 4×4, Rustler 4×4, Hoss 4×4 & Stampede 4×4 are everything you’ve come to expect from RPM and more! Take a look at everything we’ve done: We eliminated the slop in the suspension system, tightening the tolerances around the hinge pins, reduced the fore and aft movement of the A-arms at both the inner hinge pin and at the axle carriers by better than 90% and improved the durability dramatically (they’re made by RPM, enough said). As a bonus, we cut 6.5 grams of weight off of each A-arm*! That’s a total loss of just under one ounce of weight simply by replacing your stock A-arms with the RPM versions! We can’t forget about how much better aesthetically the RPM versions look either. RPM A-arms carry over our traditional look with our 30 degree leading and trailing edges, and huge bosses for the shocks and sway bar mounts. Additionally, you now have the option of a bit of color with black, blue, green and red to choose from. RPM A-arms are molded in our trademark blend of incredibly durable nylons and are backed by an industry leading warranty. We proudly stand behind our products! Designed, manufactured and produced right here in southern California in the USA! Tech Notes: Replaces stock Traxxas #3655R & #3655X. RPM A-arms will not fit ST versions of the Rally (please see RPM #73362). RPM arms are sold in sets of 1 – left and 1 – right A-arm in each package. Two packages will be needed to complete one truck. The upper hinge pin hole of the rear axle carriers cannot be used (not a stock location for the Slash 4×4) due to strengthening designs that reduce the clearance around the rear axle. *Weight comparison based on Traxxas #3655X.

159,-

Ikke på lager
Hovedbilde Absima 511WT/10000CPS Silicone Differential Oil 60ml
Absima 511WT/10000CPS Silicone Differential Oil 60ml
Features: Viscosity 10000CPS / 511WT. Optimum for differential and shock absorbers. The silicon oils from absima are extremely heat resistant and available in all viscosities. Viscosities from 100CPS to 900CPS are optimal for shock absorbers and 1000 to 1000000CPS for differential gears.  1 bottle /60ml

109,-

KJØP
Hovedbilde Radient 010043 XT90 FEMALE WITH CAP END (BATTERY END) ...
Radient 010043 XT90 FEMALE WITH CAP END (BATTERY END) ...
XT90 FEMALE WITH CAP END (BATTERY END) (5PCS)

135,-

KJØP
Hovedbilde Yeah Racing YB6016B/S10 RC PTFE Bearing (6x12x4mm)
Yeah Racing YB6016B/S10 RC PTFE Bearing (6x12x4mm)
Yeah Racing RC PTFE Bearing (6x12x4mm) Feature: RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings. Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by Aircraft quality steel. Pre-lubricated to ensure its excellent performance! These high quality bearings outweigh the other low quality one: Aircraft quality material More durable Higher precision Specification: Yeah Racing (#YB6016BS/10) RC Telfon Bearing (6x12x4mm) Material: Metal Include: Bearing (10Pcs) * Photo for Reference Only Tips on Cleaning & Lubricating Ball Bearings (RC Bearing Tips) Tips for Handling New Ball Bearing: Most competition RC racers will clean the grease on the new ball bearings and apply ball bearing oil on them. (i.e. Yeah Racing High Speed Bearing Oil / Lube #YA-0215). As re-oiling the ball bearing allows the RC cars to run smoother and makes the bearings more durable. Tips for Maintaining Old Ball Bearing: By removing the old bearing oil, it will reduce the friction in the bearing, thus making RC car run faster. Below are some tips in cleaning the ball bearings. Preparation: High Speed Bearing Oil / Lube (#YA-0215) Universal Cleaning Case (#YA-0223) Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021) Step 1: Cleaning Soak the ball bearings with volatile degreaser (i.e. brake cleaner) / apply motor spray on them. Step 2: Shake & Soak Shake the bearing case vigorously to remove dirt. It will loosen and remove the dirt trapped inside the bearings. Soak the bearings for another 15-30 minutes. Repeat the process until the oil / liquid is clean. Step 3: Drying Step 4: Re-greasing Dry the ball bearing with hot air gun / hair blower to prevent rusting of the bearing. Apply light oil on the bearings, give it about 20 minutes to penetrate the seals and then clean the outsides up. Finish: Bearing Testing Tool: This tool can test the smoothness of the bearing. Put the bearing on the tool and turn the bearing to check its smoothness. If the bearing does not turn smoothly, then it¡¦s time to get a new one. Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021)

89,-

99,-

KJØP
-10%
Hovedbilde Radient 010023 XT60 PAIRS INCLUDING HEAT SHRINK (5PCS)
Radient 010023 XT60 PAIRS INCLUDING HEAT SHRINK (5PCS)
XT60 PAIRS INCLUDING HEAT SHRINK (5PCS)

149,-

KJØP
Hovedbilde Yeah Racing DSG-0060SV Shock-Gear 60mm Damper Set For ... Hovedbilde Yeah Racing DSG-0060SV Shock-Gear 60mm Damper Set For ...
Yeah Racing DSG-0060SV Shock-Gear 60mm Damper Set For ...
Yeah Racing Shock-Gear 60mm Damper Set For 1/10 RC Off Road Car Tamiya GF01 WR02 Kyosho Beetle Based on the proven success on the Yeah Racing Damper Gear Set 50mm / 55mm series. Yeah Racing have announced the latest 60mm damper set for 1/10 Off-Road and Rally Cars. Included are three different hardness of springs, Yeah racing damper set featured the state of the art technology interchangeable damper piston which gives serious tuner so much potential to fine tune their damper settings. The interchangeable piston will allow 3 settings of damper's response as well as 4 rebound rate adjustment to fit different road surface and different needs. The Yeah Racing 60mm damper set has spent great effort on increasing the durability and maintenance ease. The damper shaft is coated with titanium for minimum friction and longer lifespan. To cope with the need to change the damper piston from time to time, the shock gear have selected premium quality anti-leak O-Ring to keep the damper oil in place. CNC machined premium grade aluminum were used to build this high-end damper set for maximum durability at the minimum weight.   Rebound Core System: The Yeah Racing Aluminum damper set comes with 6 different damper piston for fine-tuning the rebound characteristics. The set of 3 general type piston allow you to adjust 3 different rebound rate where has the same depression and compression resistant. While the "V piston" featured a v shape damper oil tunnel which allows the depression rate differ from the compression rate for more precise tuning. For instance, a rear wheel drive RC can be benefit by a stiffer rear wheel compression rate to offset the weight transfer during hard acceleration while maintaining balanced depression rate throughout the whole car.     Features: For: 1/10 Off Road Cars Material: Aluminum Color: Silver CNC Machined Titanium Coated Damper Shafts Selected Anti-Leak O-Ring Unique Piston Design Rebound Core System Aluminum Damper Cylinder Easy To Refill Damper Oil Simple Installation   Includes: Shcok-Gear (4 pcs) Piston 2 Holes (4 pcs) Piston 3 Holes (4 pcs) Piston 4 Holes (4 pcs) V Piston 2 Holes (4 pcs) V Piston 3 Holes (4 pcs) V Piston 4 Holes (4 pcs) Spring Red (Soft) (4 pcs) Spring Yellow (Medium) (4 pcs) Spring Blue (Hard) (4 pcs) Ball End (8 pcs) Ball Nut (4 pcs) Shock Oil 300CST 15ml (1 pc) Manual (1 pc)

479,-

499,-

KJØP
-4%

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png