Hopp til innhold

RPM 70992 Precision Camber Gauge

Art.nr: 70992

139,-

RPM

RPM

** Ikke på lager

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Precision Camber Gauge

Quick Notes:
– works with tires up to 4.5 inches (114mm) and taller*
– accurate to within ½°

Description

One of the most critical suspension adjustments on a R/C vehicle is the vehicle’s camber. RPM has proven time after time that even the most experienced drivers cannot set their camber by “eye”. With our Camber Gauge, novice to professional drivers alike can set their camber on all wheels to less than one degree of accuracy! Once camber has been set and documented, this gauge will be able to tell you if a crash has affected your camber! When used in conjunction with #70492 toe-in gauge, you’ll gain a distinct advantage over anyone that does not have our gauges! RPM’s Camber Gauge is the only tool that allows you to do track-side checks in a matter of seconds!

Produsent

Relaterte produkter

 

Art.nr: 70492
Copied
RPM Toe-In Gauge Quick Notes: Works with most 1/10 scale cars, trucks & sedans Accurate to within one half of a degree per side Our Toe-In gauge allows you to do trackside checks of the toe-in without removing the wheels! Our gauge checks toe through the simple method of comparing the distance between the wheels at the rear of the tire to the distance between the wheels at the front of the tire! Our gauge is accurate to within one half of a degree per side and closer! Also can be used to check the legal width of off-road buggies and trucks. This gauge includes a second adjustment hole to check narrower vehicles such as sedans as well!

139,-

KJØP

Kunder kjøpte også

Yeah Racing RC PTFE Bearing Set with Bearing Oil For 1:10 Tamiya TT01 & DF02 RC Touring RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings. Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by Aircraft quality steel. Pre-lubricated to ensure its excellent performance! These high quality bearings outweigh the other low quality one: Aircraft quality material More durable Higher precision *Now comes with bearing oil for maintaining bearings in long run. (This new bearing set (with bearing oil) will replace the old item.)   Specifications: Telfon Bearing For Tamiya TT01 & DF02 RC Touring #YB0082BX Material: Metal   Includes: Bearing (16Pcs) Bearing Oil (15ml) #YA-0215   Tips on Cleaning & Lubricating Ball Bearings (RC Bearing Tips) Tips for Handling New Ball Bearing: Most competition RC racers will clean the grease on the new ball bearings and apply ball bearing oil on them. (i.e. Yeah Racing High Speed Bearing Oil / Lube #YA-0215). As re-oiling the ball bearing allows the RC cars to run smoother and makes the bearings more durable. Tips for Maintaining Old Ball Bearing: By removing the old bearing oil, it will reduce the friction in the bearing, thus making RC car run faster. Below are some tips in cleaning the ball bearings.

199,-

KJØP
Knife Blade #11 (5) DETAILS #11 Blades, #11 Double Honed Replacement Blade Excel #11 Blades' most popular blade! Made from carbon steel, #11 Blades Available in packs of 5, 15, 100, 500, 1000 The double honed replacement blade has a strong tip and flex so you do not have to worry about breaking their edge and tip.  This versatile replacement blade fits with all standard light and medium duty Xacto style knives. Used with: cuts on paper, card-stock, stencils, film, photographs, tape, plastic, cork, wood, vinyl, cloth, leather, cardboard, foam boards and most other light-weight crafting.  Used for: model making, paper cutting, cake decorating, Cricut vinyl cutting and polymer clay. Used by graphic artists, architects, car wrappers, designers, hobbyists, scrapbook artists and crafters. Fits with: K1, K3, K17, K18, K26, K30, & K71 handles L – 1.575/ H – 0.350 / E - 0.975/ S – 0.250/ T – 0.020 Made in the USA 

39,-

KJØP
Yeah Racing Li-Po Monitor With LCD Version 2S-8S Lipo alarm. Description: This Li-Po detector is designed to measure 1-8 cells Li-Po batteries with a dual buzzer When the voltage is below the set value, it will buzzer with a red LED light Feature: Voltage detection precision: Approx. 0.01V Unit voltage display range: 0.5-4.5v Total voltage display range: 0.5-36V 1S Test model voltage range: 3.7-30V Low voltage alarm model for 2-8S Alarm set value range: OFF-2.7-3.8V Include: Li-Po Monitor with LCD version (1pc)

89,-

KJØP
  Traxxas Ultra Premium Tire Glue Ultra Premium Tire Glue (#6468) with packageOnly one tire glue is certified for use with the 100+mph XO-1: Traxxas Ultra Premium Tire Glue. The XO-1 relies on a high-strength tire bond to withstand incredible centrifugal forces at speeds in excess of 100mph. No other glue endures such high loads, which makes Traxxas Ultra Premium Tire Glue the ultimate adhesive for any tire and rim combination (and any other application that requires a high-strength bond).  To preserve the maximum bonding power of Traxxas Ultra Premium Tire Glue, its bottle is specially designed to maintain a tight seal and prevent clogging. The bottle and nozzle are made of glue-resistant material, and a pin integrated into the tightly-fitting screw-on cap assures glue won't clog the bottle tip. The tip's fine opening allows precise glue application every time you reach for Traxxas Ultra Premium Tire Glue. Traxxas Ultra Premium Tire Glue is custom-blended exclusively for Traxxas. There simply is no better bond for high-speed, high-power vehicles. Traxxas Ultra Premium Tire Glue Features:   The only glue Traxxas Certified for the 100+mph XO-1 Highest-quality cyanoacrylate (CA) glue available Fine tip opening for precise glue application Tightly-fitting cap with sealing pin Glue-resistant bottle and tip material Includes two precision application tips Content 20gr    

139,-

159,-

KJØP
-13%
Upright: 58124/093/082/074 OBS: Kun en stykk i pakken.   This is Tamiya Grasshopper II Upright White.

49,-

KJØP
This is a pair of Rear Treaded Tires for the Tamiya Grasshopper. FEATURES: Rubber, all-terrain treaded tires INCLUDES: One pair of Rear Tires for the Tamiya Grasshopper REQUIRES: Tire glue. SPECS:    Width: 1.5" (38mm)           Outside Diameter: 3.1" (79mm)           Inside Diameter: 1.5" (38mm) COMMENTS: If front tires are needed, order 9805033

109,-

KJØP
This is the Wing Wire from Traxxas. FEATURES Prebent steel wire fastens rear wings to chassis on Traxxas cars INCLUDES Wing Wire SPECIFICATIONS Length: 2.4" (62mm) Width: 2.0" (52mm) Wire Diameter: 0.079" (2mm)

29,-

39,-

KJØP
-26%
Denne erstatter TRX 2531   These are the Replacement Front Suspension Arms for many Traxxas kits.   These are located on the front bulkhead and are held on by suspension pins. FEATURES: Nylon construction           Black in color INCLUDES: Two black nylon suspension arms REQUIRES: Assembly onto kit. SPECS:    Length:  3"           Width: 1.2" COMMENTS: This will work on the Bandit, Nitro Stampede, Nitro Rustler, SRT,             and the Nitro Sport.

129,-

KJØP
These are Left and Right Caster Blocks for the Traxxas Bandit XL5  . Traxxas Bandit VXL Traxxas Drag Slash 1967 Chevrolet® C10 Truck Traxxas Drag Slash Ford® Mustang® 5.0 On the other cars it is TRX 3632 that fits. FEATURES: Black Plastic Caster Blocks INCLUDES: One Left Block           One Right Block REQUIRES: Traxxas Bandit COMMENTS: None  

49,-

59,-

KJØP
-17%
This is a Stock Replacement Front Bulkhead used in many Traxxas vehicles.          The front suspension arm hinge pins pass through this piece. FEATURES: Gray nylon construction INCLUDES: One front bulkhead REQUIRES: Nothing.  This is a direct replacement part. SPECS:    Length: 73.6mm (2.90")           Width: 41mm (1.62")           Height: 29mm (1.14") COMMENTS: This part is used on the following vehicles:             Rustler, Bandit, Stampede, Nitro Rustler, SRT, Nitro Stampede,             Rustler XL and Stampede XL.

79,-

Ikke på lager
Yeah Racing Aluminum Big Bore Go 60mm Damper Set 4pcs for 1/10 RC Touring Car Blue Description: Big Bore Go! Purchase this set of big bore shocks, add oil and off you go! Includes two different types of mounting pillow ball studs for different types of cars! Included are different springs for you to fine tune your ride so you don't have to go looking for different springs after purchasing our set of shocks! If you really want to get serious with tuning, there are different holes of pistons included so you can adjust the how the shock reacts to the shock oil. Feature: For: RC Car Material: Aluminum Include: Aluminum Big Bore Go Dampers (4 pcs) Springs (12 pcs) Pillow Balls (8 pcs) Ballstuds (8 pcs) Threaded Ballstuds (8 pcs) Pistons (8 pcs)

469,-

499,-

KJØP
-6%
Box, receiver (sealed)/ foam pad/ silicone grease/ 3x8mm BCS (2)/ 2.5x8mm CS (2)/ 3x6mm BCS (2) Waterproof receiver box includes foam pad, silicone grease, 3x8 mm screws (2), 2.5x8 mm screws (2), and 3x6 mm screws (2).

149,-

Ikke på lager
M-Drive Screw & Nut Box - 127x66x22mm This is a small assortment box for accessories, nuts & screws and it has movable drawer sides. Specs: Number or drawers: 10 Length: 127mm Width: 66mm height: 22mm

35,-

KJØP
Ett perfekt gjenge lim som er tilegnet modell byggeren og RC. Dette gjengelimet sitter, men det er fremdeles mulig å løsne skruene da man ønsker det. Det optimale gjenge limet for RC entusiasten. 10ml

65,-

KJØP
Glem aldri hvilke batterier som er ladet! Med disse kan du fint markere status på batteriene. Sett de på de som er ladet, eller omvendt. Gir også en ekstra sikkerhet. Beskytter batterier mot kortslutninger i kontakt med fremmedlegemer.

29,-

KJØP
Traxxas straight tip heavy-duty polycarbonate scissors are perfect for cutting curved lines in polycarbonate bodies and other simmilar materials.

119,-

KJØP
XT60 PAIRS WITH CAP END (5PCS)

169,-

KJØP
QuicRun 1060, 60A børsteregulator som er vann og støv beskyttet. Passer til de fleste 1:10 biler med børsteoppsett, leveres med Tamiya batterikontakt og programmeres enkelt via jumper. Kan brukes med 2-3s LiPo eller 7,2V - 10,8V NiMh batterier.   Størrelse 35,5 x 32,18 x 18mm Vekt 39g

389,-

429,-

KJØP
-9%
Robinson Racing 1120 Pinion Gear Metric 20T   This is a 20 Tooth pinion gears. These are used on cars such as the Tamiya touring cars (this works on the TA01 and the TA02, but NOT on the TA03). They also work on some other Tamiya cars, and on the Kyosho Ultima Pro, and the Ultima Pro XL. These gears are available in sizes from 12 to 24 teeth. Includes a pinion set screw.   SPECIFICATIONS Number of Teeth: 20 Pitch: .6 Mod Bore: 18 0.125 (3.2mm)

89,-

KJØP
Traxxas body reinforcement sets provide added protection for your Rustler 4x4 or Rustler during extreme driving. These high-strength composite reinforcements help spread impact forces through the body, ensuring long-lasting fun through the toughest landings and hardest hits.

59,-

KJØP
These are the 4mm Flanged Nylon Locknuts from Traxxas. FEATURES: Aluminum construction anodized blue in color           Serrated on the back for sure grip INCLUDES: Four 4mm Flanged Nylon Locknuts REQUIRES: 6mm nut driver SPECS:    Hole Diameter: 4mm           Hex Size: 6mm

99,-

109,-

Ikke på lager
-9%
This is a 1/3 oz (10ml) "Mini" glass jar of Acrylic Paint from Tamiya. FEATURES: Made from water-soluble acrylic resins and are completely safe.           Can be used on most common model plastics such as styrol resin,             styrofoam and wood.           Excellent for either brush or spray painting.           Covers well, flows smoothly with no blushing or fading, and can be             blended easily.           Jar will accept standard airbrush lid.           Can be washed away with plain water if done prior to curing.           Available in 19 glossy, 45 flat and 7 translucent colors plus an             exclusive thinner and a flat base. INCLUDES: One Mini 1/3 oz (10ml) jar of Acrylic Metallic Blue paint. REQUIRES: Paint Brush or Airbrush to apply to model.           Eye, Lung and Skin protection.           Acrylic Thinner or Water to clean up before paint is cured. COMMENTS: Keep out of the reach of children.           Highly Flammable Paint.           For Adult Modelers Only.

30,-

KJØP
Body, Rustler 4X4 VXL, green/ window, grill, lights decal sheet (assembled with front & rear body mounts and rear body support for clipless mounting)

639,-

699,-

KJØP
-9%
Camber links, rear (TUBES blue-anodized, 7075-T6 aluminum, stronger than titanium) (73mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3x15 BCS (4) required for installation)

419,-

KJØP
Tires, Talon EXT 2.8" (2)/ foam inserts (2)

239,-

KJØP
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png