Hopp til innhold
Hjem / Reservedeler/Option-parts / Reservedeler Bil / Reservedeler etter Produsent / Traxxas El-Biler / Rustler VXL / Traxxas 2444 Camber Link Front 67mm(cc) Complete (2) Bandit

Traxxas 2444 Camber Link Front 67mm(cc) Complete (2) Bandit

Art.nr: TRX 2444

89,-

Traxxas

Traxxas
På lager: 2

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

 

  • Turnbuckles, camber link, 47mm (67mm center to center) (front) (assembled with rod ends and hollow balls) (1 left, 1 right)

Produsent

Traxxas

Traxxas

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

Hovedbilde Traxxas 2072A Gear Set for Servo 2070/2075
Traxxas 2072A Gear Set for Servo 2070/2075
Gear set (for 2070, 2075 servos)

49,-

KJØP
Hovedbilde Traxxas 2429 Pinion Gear 29T 48P
Traxxas 2429 Pinion Gear 29T 48P
Gear, 29-T pinion (48-pitch)/ set screw

39,-

49,-

KJØP
-20%
Hovedbilde Traxxas 6846 Steering Linkage 3x20mm Turnbuckle
Traxxas 6846 Steering Linkage 3x20mm Turnbuckle
Linkage, steering (3x20mm turnbuckle) (1)/ rod ends (2)/ hollow balls (2)

45,-

KJØP
Hovedbilde Traxxas 5830 Chassis Conversion Kit Low CG Slash Hovedbilde Traxxas 5830 Chassis Conversion Kit Low CG Slash
Traxxas 5830 Chassis Conversion Kit Low CG Slash
This is the optional Low CG Conversion Kit for the  1/10 scale 2WD Traxxas Slash.     FEATURES Lowers the chassis 1" (25.4mm) for better handling and greater  cornering speed  Holds battery and electronics as deep in chassis as possible  45% lower battery position   INCLUDES Chassis  Lower Chassis  Two Nerf Bars  Battery Hold Down with Front and Rear Retainers  Two Front Shock Springs  Hardware and Instructions

439,-

499,-

KJØP
-12%
Hovedbilde Traxxas 2735 Front Bumper
Traxxas 2735 Front Bumper
This is the replacement front bumper for the TRX-1 and TRX-3.  It is molded of white plastic.  It is 2 3/8" long. INCLUDES:  1- front bumper

39,-

KJØP
Hovedbilde RPM 80402 Shock Shaft Guard Black Traxxas (4)
RPM 80402 Shock Shaft Guard Black Traxxas (4)
Shock Shaft Guards for Traxxas & Durango 1/10th Scale Shocks Quick Notes: – fits Traxxas 1:10 scale Ultra and “Big Bore” shocks – fits Durango 1:10 scale shocks Description Rocks, dirt and debris striking shock shafts lead to dents, dings and burrs, which in turn, leads to torn shock seals. Torn shock seals means leaky shocks and poor shock performance. RPM Shock Shaft Guards shield the shock shaft from those deteriorating elements, prolonging the life of the shock shaft, which improves the long-term performance of the suspension and in turn, prolongs the time between shock rebuilds! RPM Shock Shaft Guards are a simple design, replacing your stock shock spring cup with one that has a thin but tough shield rising up to the base of the shock body, completely blocking debris from striking the shock shaft. The back and sides are open, which prevents debris from building inside the guard as well. The kit comes with replacement oversized shock rod ends, improving durability and consistency on the shock pivot ball. Additionally, we redesigned the top of the rod end so it is square. That square end keys the shock shaft guard for directional control. The front shield of the guard covers over 100 degrees of frontal exposure! RPM Shock Shaft Guards are zero friction protection devices, meaning the guard never touches the working elements of the shock. RPM Shock Shaft Guards are sold in sets of four, including four rod ends for the shocks and are stock replacement items. Nothing more is needed for installation. Check out this partial list of vehicles they will fit: Slash 2wd, Slash 4×4, Stampede 4×4, nitro and electric versions of the Stampede 2wd and Rustler, Bandit, Nitro Sport, T-Maxx & E-Maxx (see tech notes below), and many more including vintage and legacy models. RPM Shock Shaft Guards are available in Black, Green, Blue and our Dyeable White materials.  Tech Notes: RPM Shock Shaft Guards fit all Traxxas 1/10th scale molded shocks as well as Traxxas Big Bore shocks but will not fit the Traxxas Jato or GTR shocks. They fit the T-Maxx and E-Maxx but will not work with RPM T/E-Maxx A-arms due to clearance limitations on the upper arm.    

129,-

149,-

KJØP
-13%
Hovedbilde Traxxas 2426 Pinion Gear 48P 26T w/Screw
Traxxas 2426 Pinion Gear 48P 26T w/Screw
This is a 26 Tooth, 48 Pitch Pinion Gear with Set Screw                                from Traxxas. FEATURES: Steel construction, silver in color INCLUDES: One 26 Tooth, 48 Pitch Pinion Gear           One 3x4mm Set Screw (1.5mm hex size) REQUIRES: Installation SPECS:    Length: .42" (10.5mm)           Inside Diameter: 1/8"           Outside Diameter: .58" (14mm)  

39,-

KJØP
Hovedbilde Traxxas 3762A Ultra Shocks (2) Rear
Traxxas 3762A Ultra Shocks (2) Rear
Denne passer til: -Bandit XL5/VXL bak. -Rustler XL5/VXL bak. -og til flere Traxxas biler. Sjekk manualen til din bil.   This is a pair of the Ultra Shocks for the Traxxas Bandit, Rustler, Stampede 2WD, E-Maxx, T-Maxx and Slash 2WD. FEATURES: Gray composite bodies           Stock replacement unassembled shocks           Preload spacers and two red springs INCLUDES: Two Ultra Shocks for the Traxxas Cars with bottle of silicone             oil and assembly diagram REQUIRES: Assembly COMMENTS: Two pairs are required if replacing all shocks.

219,-

KJØP
Hovedbilde Traxxas 3743 Steering Bellcrank
Traxxas 3743 Steering Bellcrank
These are Steering Bellcranks and Draglinks for the                       Traxxas Rustler and Stampede. FEATURES: White Plastic Construction INCLUDES: One Bellcrank           One Link           One Arm REQUIRES: Rustler of Stampede COMMENTS: None  

49,-

KJØP
Hovedbilde Traxxas 3677 Wheelie Bar Mount Stampede/Rustler/Bandit
Traxxas 3677 Wheelie Bar Mount Stampede/Rustler/Bandit
This is an optional Wheelie Bar Mount for the Traxxas                    Electric Stampede, Rustler and Bandit. FEATURES: Constructed of hardened plastic, black in color           Installs at rear of chassis to hold wheelie bar arm and wheels in             place INCLUDES: Assembled optional Wheelie Bar Mount with mounting instructions and             hardware REQUIRES: Wheelie Bar Arm                   Wheels and Axles

49,-

KJØP
Hovedbilde Traxxas 3678 Wheelie Bar Assembly ...
Traxxas 3678 Wheelie Bar Assembly ...
This is an optional Wheelie Bar for the Traxxas                    Electric Stampede, Rustler and Bandit. FEATURES: Constructed of hardened plastic, black in color           Installs at rear of chassis to prevent vehicle from flipping over             during wheelies INCLUDES: Assembled optional Wheelie Bar with mounting instructions and             hardware REQUIRES: Fastening to rear of chassis

209,-

229,-

KJØP
-9%
Hovedbilde Traxxas 3744X Servo Saver
Traxxas 3744X Servo Saver
This is the replacement servo saver for the following Traxxas kits: Rustler and Stampede. The servo saver is spring loaded and has adaptors for both Futaba and Airtronics servos. Features: White plastic construction           Spring loaded           Two adaptors-Futaba and Airtronics

49,-

KJØP
Hovedbilde Traxxas 5827X Hold down, battery/ hold down retainer
Traxxas 5827X Hold down, battery/ hold down retainer
This extended battery hold down for the Slash or Slash 4x4 allows for lipo packs of up to 42mm tall to fit in the stock tray. Allows for installation of taller, multi-cell batteries

75,-

KJØP
Hovedbilde Traxxas 3768 Spring Retainers (2)
Traxxas 3768 Spring Retainers (2)
These are the Traxxas Spring Retainers for Traxxas Shocks.        This set contains the spring retainers that hold the springs in     place over the shock body and the piston heads that control the amount                      of oil flow in the shock cylinder. FEATURES: Constructed of molded plastic.           Contains enough parts for two shocks.           Fits the shocks on most Traxxas nitro and electric powered vehicles.           Two hole piston head for greater dampening or three hole piston head             for softer spring performance. INCLUDES: One Traxxas Spring Retainer Set with:             Two upper and two lower spring retainers             Two 2 hole piston head covers             Two 3 hole piston head covers REQUIRES: Disassembly of shock to install parts.

39,-

KJØP
Hovedbilde Traxxas 1654 Wheel Hubs (2)
Traxxas 1654 Wheel Hubs (2)
Wheel hubs, hex (2)/ stub axle pins (4)

35,-

KJØP
Hovedbilde Traxxas 2742X Rod Ends Short w/Hollow Balls (6)
Traxxas 2742X Rod Ends Short w/Hollow Balls (6)
This are Rod Ends Short for the Nitro T-Maxx.              These rods ends attach to turnbuckles for front/rear. FEATURES: Black nylon rod ends           Steel pivot balls INCLUDES: Six nylon rod ends           Six pivot balls REQUIRES: Turnbuckles: TRX 2742X SPECS:    Length: .695" (17.6mm)           Inner Diameter: .217" (5.5mm)

49,-

Ikke på lager
Hovedbilde Traxxas 3727A Battery Hold-Down Plate Gray (2)
Traxxas 3727A Battery Hold-Down Plate Gray (2)
           This is the Traxxas Battery Hold-Down Plate, Metal    Post and Body Clip replacement parts for the Rustler and Rustler XL truck. FEATURES: Gray plastic construction INCLUDES: One gray plastic hold-down plate,  (2 5/8" long, 3/8" wide and                  has 2 holes that attach to the posts).           Two metal posts  (aluminum with a hex shaped top and hole                  for the body clip, threaded on bottom).           Two steel body clips. COMMENTS: Body clips are bent for easier installation.

39,-

KJØP
Hovedbilde Traxxas 9195 69mm Fixed-Length Front Camber Links (2) ...
Traxxas 9195 69mm Fixed-Length Front Camber Links (2) ...
Traxxas 9195 - Camber links, front (molded composite) (69mm center to center) (2) (assembled with hollow balls) (for use with #9180 or 9181 upgrade kit). Does not fit bandit.

69,-

KJØP
Hovedbilde Traxxas 3769 Spring Pre Load Spacers
Traxxas 3769 Spring Pre Load Spacers
This is the Traxxas replacement TRX3769 Spring Pre-Load Spacers that comes with the Stampede and Rustler trucks and many others Traxxas cars along with the Black Long Shocks. and Black XX-Long shocks. FEATURES Made of a black plastic/nylon material. Used to help pre-load the shock springs. This is installed on the top of the shock springs. Enough for 1 pair of shocks. INCLUDES 2 spacers 1mm thick 2 "" 2mm "" 2 "" 3mm "" 2 "" 4mm "" , COMMENTS Looks like a letter "C" Also fits shocks with a 13.5mm outside diameter body.

59,-

KJØP
Hovedbilde Traxxas 3767 Shock Caps/Bottoms (2)
Traxxas 3767 Shock Caps/Bottoms (2)
 These are Shock Caps and Bottoms for Traxxas kits.                 These seal the shock containing the shock oil. FEATURES: Nylon construction INCLUDES: Two nylon shock cap (tops) Two nylon shock cap (bottoms) REQUIRES: Other shock components SPECS: Diameter Tops Bottoms 16MM 13MM COMMENTS: These fit the N/E 4-tec, N/E Stampede, and T/E-Maxx

39,-

KJØP
Hovedbilde Traxxas 3727 Battery Hold Down Plate Rustler
Traxxas 3727 Battery Hold Down Plate Rustler
  This is the Traxxas #3727 Rustler Battery Hold-Down Plate, Metal Post and Body Clip replacement parts for the Rustler truck. INCLUDES:  1  Black plastic hold-down plate,  (2 5/8" long, 3/8" wide and                  has 2 holes that attach to the posts).            2  Metal posts  (Aluminum with a hex shaped top and hole                  for the body clip, threaded on bottom).            2  Steel body clips.   COMMENTS: Body clips are bent for easier installation.    

39,-

KJØP
Hovedbilde Traxxas 3740 Pins 2.5x31.5mm Rustler (2)
Traxxas 3740 Pins 2.5x31.5mm Rustler (2)
This is the  2.5x31.5mm Pins with E-clips. FEATURES:           Made of stainless steel           This is used to hold the front steering block (TRX 3636)              to the castor block ((TRX 3632) on the electric              (not Nitro) Rustler           Also called the vertical kingpin INCLUDES:           2  Pins (kingpins)           4  2.5mm e-clips

29,-

KJØP
Hovedbilde Traxxas 3636 Steering Block (2)
Traxxas 3636 Steering Block (2)
Traxxas Bandit.  They are made of black reinforced nylon and are what the front axles go through. Steering blocks, left & right (2) (requires 5x11x4mm bearings) PACKAGE INCLUDES:  Two steering blocks (one left and one right)

39,-

KJØP
Hovedbilde Traxxas 2432 Caster Blocks Left/Right
Traxxas 2432 Caster Blocks Left/Right
These are Left and Right Caster Blocks for the Traxxas Bandit XL5  . Traxxas Bandit VXL Traxxas Drag Slash 1967 Chevrolet® C10 Truck Traxxas Drag Slash Ford® Mustang® 5.0 On the other cars it is TRX 3632 that fits. FEATURES: Black Plastic Caster Blocks INCLUDES: One Left Block           One Right Block REQUIRES: Traxxas Bandit COMMENTS: None  

49,-

59,-

KJØP
-17%
Hovedbilde Traxxas 2750R Suspension arms, long (rear)
Traxxas 2750R Suspension arms, long (rear)
Suspension arms, long (rear) for Traxxas Bandit.

95,-

KJØP

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png