Hopp til innhold
Hjem / Dekk & felg / Traxxas El-Biler / 2wd / Bandit XL-5 / Traxxas 1771 Tire Spiked 2.1" Front (2)

Traxxas 1771 Tire Spiked 2.1" Front (2)

Art.nr: TRX 1771

109,-

Traxxas

Traxxas
På lager: 2

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

This is a pair of replacement tires for the Traxxas line of cars.


FEATURES

A blend of natural and synthetic rubber in a step pin configuration.


INCLUDES

2 tires per package.
SPECIFICATIONS: Inside diameter: 2.1"
 Outside diameter: 3.25"
 Width: .75"

Produsent

Traxxas

Traxxas

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

Hovedbilde Traxxas 9776R Gear Set Transmission Crawl (Low Range) ...
Traxxas 9776R Gear Set Transmission Crawl (Low Range) ...
Gear set, transmission, low range (crawl) (40.3:1 reduction ratio)/ pinion gear, 11-tooth Give your TRX-4M™ unstoppable torque with this low-range transmission gear set. The gear set features an ultra-low 40.3:1 reduction ratio for maximum rock-climbing power. The set includes all transmission gears and a new 11-tooth motor pinion. Accessory part for these models: TRX-4M 1/18 Ford® Bronco® TRX-4M 1/18 Land Rover® Defender®

69,-

KJØP
Hovedbilde Yeah Racing Steel Bearing Set (14pcs) For Tamiya DT02 ... Hovedbilde Yeah Racing Steel Bearing Set (14pcs) For Tamiya DT02 ...
Yeah Racing Steel Bearing Set (14pcs) For Tamiya DT02 ...
Yeah Racing RC PTFE Bearing Set  For Tamiya DT-02 Chassis   Description Replace or upgrade to a fullset of bearings for your car for a smoother and more efficient running car! No more looking up all the sizes you need and potentially getting the wrong ones with these custom sets for specific cars!   Feature:   For : Tamiya DT02 DT03 Material : Steel Shielding: Rubber   Specification:   YB6014B  5mm x 11mm x 4mm (14 pcs)   Include:   Total Bearing (14 Pcs)

119,-

KJØP
Hovedbilde Savox SW-0230MG PLUS Waterproof 7.4V 0.13 speed/8kg. ... Hovedbilde Savox SW-0230MG PLUS Waterproof 7.4V 0.13 speed/8kg. ...
Savox SW-0230MG PLUS Waterproof 7.4V 0.13 speed/8kg. ...
SAVÖX SW-0230MGPLUS - Water Proof High Voltage Metal-Geared Standard-Sized Servo The SW-0230MG-PLUS is a budget friendly waterproof digital servo capable of operating on high voltage. This is a great upgrade if your looking to drive your RC vehicle in any condition - rain or snow. Features: New: Soft Start New: Sanwa SSR compatible Strong metal gear train for added durability Waterproof case design Capable of HV operation Ideal for cars, truck, and boats subject to water or snow Specifications: Torque @ 6V: 6.5kg/cm Torque @ 7.4V: 8kg/cm Speed @ 6V: 0.16 sec/60 deg Speed @ 7.4V: 0.13 sec/60 deg Dimensions L x W x H: 41.8 x 20.2 x 38mm Weight: 60g Technical Details: Operating Temperature: -10° to 50°C Running Current (no load): 100mA @6.0V, 120mA @7.4V Stall Current (at locked): 1500mA @6.0 V, 1800mA @7.4V Idle Current: 5mA @6.0V, 5mA @7.4V Wire Length: 200 ± 5mm Output Gear Spline: 25 Tooth Bearings: 2BB Operating Travel: 100° (1000 → 2000 µ second) Neutral Position: 1500 µ second Pulse Width Range: 800 → 2200 µ second Maximum Travel: Appx 130° (900 → 2100 µ second) Refresh Rate: 240 Hz Motor Type: Brushed Specifications   Parts   Popular Accessories   GPSR

539,-

599,-

KJØP
-10%
Hovedbilde Tamiya 87099 Cera-Grease HG
Tamiya 87099 Cera-Grease HG
This is the Cera-Grease HG from Tamiya.     FEATURES High-performance grease which can reduce friction loss by 50%  Consists of extremely fine boron nitride particles  For use on plastic and metal parts   INCLUDES One Tube of Cera-Grease HG   REQUIREMENTS Apply to gears, axles, and joints to increase efficiency   SPECIFICATIONS  NET: 10g (0.35oz)   COMMENTS Do not apply to switches

85,-

KJØP
Hovedbilde Tamiya 86016 PS-16 Polycarbonate Spray Metal Blue 3 oz
Tamiya 86016 PS-16 Polycarbonate Spray Metal Blue 3 oz
 This is Tamiya Color Spray Lacquer for Polycarbonate (PS-16 Metallic Blue).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.

109,-

119,-

KJØP
-8%
Hovedbilde Traxxas 2481 Wheels Grey Satin w. Chrome Ring 2.2 2WD ...
Traxxas 2481 Wheels Grey Satin w. Chrome Ring 2.2 2WD ...
Wheels, 2.2' (graphite gray, satin chrome beadlock) (2) (Bandit® front)

139,-

KJØP
Hovedbilde Traxxas 2480 Wheels Grey Satin w. Chrome Ring 2.2 2WD ...
Traxxas 2480 Wheels Grey Satin w. Chrome Ring 2.2 2WD ...
Wheels, 2.2' (graphite gray, satin chrome beadlock) (2) (Bandit® rear)

149,-

KJØP
Hovedbilde Tamiya 58572 1/10 Volkswagon Beetle M-06 Kit med esc
Tamiya 58572 1/10 Volkswagon Beetle M-06 Kit med esc
 This is the radio controlled, electric powered, 1/10 scale   Tamiya M-06L Chassis Racing Car Kit with the Volkswagen Beetle Type 1 Body. FEATURES: Chassis: Molded plastic bathtub style           Drive: Rear wheel           Differential: Planetary gear type           Shocks: Friction, plastic body           Body: Clear untrimmed Volkswagen Beetle with chrome plated plastic             bumpers and mirrors           Motor: 540 size brushed           ESC incl from factory.           Bumper: Front, urethane foam           Tires: 60D on-road 0.94" (24mm) wide, 2.2" (56mm) diameter, with             foam inserts           Suspension: Double wishbone           Wheels: Chrome plated plastic (24mm) wide, 1.5" (38mm) diameter           Camber: Adjustable, camber refers to the angle of the tops of the             tires from vertical when viewed from front or behind vehicle           Caster: Adjustable, caster/toe-in refers to the angle of the front             suspension when viewed from the side of the car in relation to the             chassis           Steering: Bell-crank type with high torque servo saver INCLUDES: M-06L Chassis Car Kit with tires, chrome wheels, foam inserts, tires,             20T pinion gear, shocks, decal sheet, instruction manual, 540 motor             and instruction manual REQUIRES: Radio: 2-channel with high-speed steering servo and esc.           Battery: 6-cell 7.2V stick pack           Battery Charger: To match selected battery           Paint: Polycarbonate safe spray or brush-on           Building and track equipment SPECS:      Vehicle;           Width: 6.5" (165mm)           Tread: 5.4" (138mm) distance between wheel centers side-to-side           Wheelbase: Choice of three by changing rear section,                Short:  8.3" (210mm)                Medium: 8.8" (225mm)                Long:   9.4" (239mm)             Body;           Length: 14.5" (370mm)           Width:   6.6" (168mm)           Height:  4.5" (114mm)

1.995,-

2.195,-

KJØP
-9%
Hovedbilde Tamiya 58354 The Frog 2WD Buggy Kit no ESC Hovedbilde Tamiya 58354 The Frog 2WD Buggy Kit no ESC
Tamiya 58354 The Frog 2WD Buggy Kit no ESC
Relive the good old days of 32 pitch gears, 3-piece wheels and kits     you build yourself with the Tamiya 1/10 Scale Frog 2WD Off Road Racer.                   This is a model kit and must be assembled! FEATURES: Chassis: ABS resin space           Drive: Two wheel rear drive           Motor: Mabuchi RS540SH stock motor with attached bullet connectors           Bearings: Four 5x11 bearings in the gearbox and 5x11 plastic busings            in the rear axle carriers and front wheels           Shocks: Two rear horizontal mounted, aluminum body, oil-filled           Body: Clear Lexan buggy type with clear rear wing           Gearbox: 4 gear diff (pinion drives spur, spur drives drive gear,            drive gear drives diff gear)           Differential: Plastic bevel gear type           Transmission: Single speed           Speed control: Without ESC           Pinion gears: 16 tooth, 18 tooth and 19 tooth included           Wheels: 1.4" front, 1.6" rear, realistic 3-piece, white in color           Tires:  Ribbed racing front, high-grip rear spiked           Bumpers: Front plastic           Suspension: Inboard spring type front suspension           Camber Tie Rods: non adjustable           Steering Tie Rods: adjustable           Steering: Steering rods attach to servo saver and knuckle arms           Servo Saver: Included           Driveshafts: re-designed dog bone style with rubber boots INCLUDES: Tamiya Frog Buggy w/two horizontal mounted friction type rear shocks,             540 size motor,  body, tires, wheels front bumper, 16, 18, and 19             tooth pinion gears, 49, 50, and 52 tooth spur gears, without ESC, decals and building instructions REQUIRES: Radio: 2-channel radio with one standard servo.            Battery: 6 flat pack with standard connector           Charger: AC/DC timed or peak for 6-cell battery           Misc. Items: Paint for body SPECS:       CHASSIS-            Length: 16.1" (410mm)            Width:   9.4" (240mm) at rear wheels, widest point            Height:  5.7" (145mm)            Weight: 2.2lbs (1020g)            Wheelbase: 9.8" (250mm)            Tread: Front and Rear 7.3" (185mm) wheels on-center side-to-side            Track: Front and Rear 8" (203mm)            Tires, Front 2.9" (73mm) diameter .79" (20mm)                   Rear  3.4" (86mm) diameter 1.6" (42mm) wide              BODY-            Length:  12" (304mm)            Width:    2"  (51mm) at front wheels, narrowest point            Width:  3.8"  (98mm) behind rear wheels, widest point            Height: 2.4"  (61mm)

2.195,-

2.295,-

KJØP
-4%
Hovedbilde Tamiya 86002 PS-2 Polycarbonate Spray Red 3 oz
Tamiya 86002 PS-2 Polycarbonate Spray Red 3 oz
This is Tamiya Color Spray Lacquer for Polycarbonate (PS-2 Red).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.

109,-

KJØP
Hovedbilde Tamiya 86059 PS-59 Dark Metallic Blue 100ml Spray Can
Tamiya 86059 PS-59 Dark Metallic Blue 100ml Spray Can
This is Tamiya Color Spray Lacquer for Polycarbonate (PS Dark Metallic Blue).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling           An appropriate amount of paint for finishing one R/C model           This paint is impervious to oil and fuels, so it can be safely             used on gas-powered R/C bodies           The color of the lid represents the color of paint INCLUDES: PS Dark Metallic Blue Spray Can of Lacquer SPECS:    Net Volume: 3.4oz (100ml) COMMENTS: Never use this paint on plastic models           Highly flammable

109,-

KJØP
Hovedbilde Traxxas 2972G EZ-Peak Plus 8A NiMH/LiPo Dual Charger ...
Traxxas 2972G EZ-Peak Plus 8A NiMH/LiPo Dual Charger ...
Charge Two Batteries at Once 8-amp Output in Our Fastest, Most Powerful Charger! Charging Solved! Simple. Fast. Just plug in a pair of Traxxas iD batteries and press Start. Traxxas’ exclusive iD technology eliminates complicated charger programming by automatically configuring and optimizing the charge settings for Traxxas iD batteries. The EZ-Peak Dual charges two batteries simultaneously at up to 50 watts (4-amps) each, or switch to High-Output mode to charge a single battery at the maximum 100 watt (8-amps) output. Charging faster means more fun time behind the wheel. You can even charge a NiMH and a LiPo at the same time! The progress bar and audible alerts keep you informed while the advanced high resolution peak detection delivers a perfect charge every time. The EZ-Peak Dual’s Storage Mode protects your LiPo battery investment by safely preparing the batteries for extended storage. Our Most Powerful Charger Faster charging means you get to spend more time behind the wheel. The EZ-Peak Dual puts out a full 100 watts of power that equates to 8-amps of charging horsepower. It’s a twin turbo-equipped charger. Traxxas iD LiPos (4000mAh or higher) charge nearly 2x faster in High Output Mode. The EZ-Peak Dual isn’t just for iD LiPos; the Multi-Chemistry nature of the charger means LiPos and NiMHs can be charged at the same time. Advanced Mode opens the door for backwards compatibility. This allows EZ-Peak Dual to charge any Traxxas Power Cell battery equipped with a first-generation Traxxas High-Current Connectors and Traxxas iD batteries independently or simultaneously. There are two balance ports built into the charger for Traxxas LiPo batteries equipped with external balance leads. Take full advantage of the 8-amp output and experience the pinnacle of charger flexibility and power.   iD Simplicity With iD Auto-Battery Identification there’s no need to worry about the battery chemistry or capacity. EZ-Peak Dual identifies the type of battery and its capacity. EZ-Peak Dual also cuts down on wasted time by eliminating the hassle of programming and using complicated setups. Just plug an iD battery in and press Start. That’s it! Keeping with the simplicity and ease of use, the iD system eliminates fragile balance wires and clunky balance leads. The iD system streamlines the entire charging experience. QUICK FEATURES ON EZ-PEAK DUAL (#2972) CHARGER ­100-Watt output Recognizes Traxxas iD batteries to automatically program and optimize charger settings Charge a NiMH and LiPo at the same time Charge progress indicator Optimized for faster LiPo balance charging One button LiPo storage charge protects your battery investment Advanced high-resolution peak detection delivers a perfect charge Easy to use interface Audible alerts Built-in cooling fan Advanced Mode for full manual control of charger settings Legacy support for all Traxxas High-Current Connectors Built-in balance ports for conventional LiPo batteries Charges 5-8-cell NiMH batteries Charges 2S and 3S LiPo batteries EZ-PEAK DUAL (#2972G) SPECIFICATIONS AC Input: 100–240 Volts Charge Current Range: 1.0-4.0A (Dual Mode) or 5.0-8.0A (High Output Mode) (100W Max.) Discharge Current Range: 500 mAh Current Drain For Balance Ports: 500mAh NiMH Battery Cell Count: 5–8 Cells LiPo Cell Count: 2–3 Cells Net Weight: 575 g Dimensions: 176 x 138 x 57 mm  

1.395,-

1.495,-

KJØP
-7%
Hovedbilde Tamiya 47470 Top Force Evolution Hovedbilde Tamiya 47470 Top Force Evolution
Tamiya 47470 Top Force Evolution
RC TOP-FORCE EVO. (2021) The Top Force Evolution is back! This Limited Edition 4WD buggy re-release kit was originally the follow up buggy to the classic Top Force. The 2021 EVO consists of updated parts not seen in the original release. About the Top Force Evo. Designed to possess an ultra-low center of gravity, the Top Force Evo. sports a body that is both aerodynamic and cool to look at! The Top Force Evo. features front and rear sealed gearboxes, sandwiched between 2mm carbon fiber plates for dependable durability. Transmission system features a hard propeller shaft and front/rear ball diff. Double wishbone suspension comes with 4 Aluminum shock dampers, and is designed for ultimate adjustability. New to this release comes the choice of rigid and one-way counter gears for variable set up options. TECHNICAL DETAILS: 1/10 scale R/C model assembly kit. Length: 400mm, width: 250mm, height: 190mm. Wheelbase: 270mm. Polycarbonate, pre-painted and cut body with mount holes already pre-drilled. Features double deck frame and shock damper stays crafted in lightweight and rigid carbon fiber material. The shaft-driven 4WD chassis includes aluminum front and rear ball differentials for high quality setup, as well as aluminum high-capacity shock dampers for superior shock absorption. Choose between rigid and one-way counter gear options. Item 53791 universal shafts are used for the front and rear. These high-precision components provide minimal speed loss, and smooth cornering. Includes 540-brushed type motor. Includes NEW TBLE-04S ESC. Compatible with brushless motors (sensored) of 21.5 turns and higher, and Tamiya brushed motors 25 turns and over. SPECIFICATIONS Adjustable Gear Ratio Yes Bearings Includes full ball bearings Body Material Polycarbonate pre-painted body Body Stickers Included Chassis Material Carbon Fiber Construction Type Assembly Kit Differential Type Gear Drive Type 4WD Electronic Speed Control (esc) Includes NEW TBLE-04S ESC. Compatible with brushless motors (sensored) of 21.5 turns and higher, and Tamiya brushed motors 25 turns and over. Motor 540-brushed type Scale 1/10 Shock Damper CVA Oil Filled Suspension 4-wheel fully independent double wishbone Terrain Use Off-Road Required: To Complete you need the following items. 2-channel radio Steering servo 7.2volt battery Battery charger  

5.495,-

5.995,-

KJØP
-8%
Hovedbilde Tamiya 47486 - 1/10 RC Tyrell P34 1977 Argentine Grand ...
Tamiya 47486 - 1/10 RC Tyrell P34 1977 Argentine Grand ...
Tamiya 47486 - 1/10 RC Tyrell P34 1977 Argentine Grand Prix The Tamiya P34 Six-Wheeler R/C kit has enjoyed a rich release history. This release is an updated version of the Tyrrell P34 Six-Wheeler as raced at the 1977 Argentine GP (previously released as Item 49154 and 58003). The updates include some changes, which include updated instruction on the color needed to paint the side mirrors, and livery location tweaks. About the Tyrrell P34 The Tyrrell P34 is known as the distinctive “six-wheeler” Formula One race car and its 1977 Argentine GP version featured a full cowl body design without observation windows seen on the side of the cockpit. • 1/10 scale R/C model assembly kit. Length: 435mm, width: 104mm, height: 206mm. • The body is injection molded in white and blue to realistically depict the Tyrrell P34 1977 Argentine GP version. • The 6-wheel F103 chassis is equipped with friction dampers and facilitates high-speed running despite its 2WD simple structure. • Small front and large rear tires are high-grip sponge type. • RS-540 Sports Tuned Motor (Item 53068) is included. Requires: 2-channel radio steering servo ESC small 7.2volt battery with charger. Specs: Adjustable Gear Ratio Yes Bearings Plastic bushing Body Material ABS Plastic Body Stickers Included Chassis Material FRP Plate Chassis Type F103 Construction Type Assembly Kit Differential Type Ball Pressure Plate Drive Type 2WD Electronic Speed Control (esc) Not Included Motor 540-brushed type Required To Complete 2-channel radio, steering servo, ESC, small 7.2volt battery & battery charger, and Tamiya TS paint. Scale 1/10 Shock Damper Friction type Suspension Coil King Pin Front/mono-shock rear Terrain Use On-Road

3.495,-

3.695,-

Ikke på lager
-5%
Hovedbilde Traxxas 10247-GRN Servo Horn Steering Alu Green Maxx ...
Traxxas 10247-GRN Servo Horn Steering Alu Green Maxx ...
Traxxas 10247-GRN - Aluminium Servo horn Servo horn, steering, 6061-T6 aluminum (green-anodized)/ 3x15mm BCS (with threadlock) (1) Increase the precision and durability of your Maxx® Slash® with this aluminum servo horn. Machined from tough 6061-T6 aluminum, the servo horn adds colorful style with a brilliant anodized finish. Ideal for high-power upgraded servos, the servo horn integrates perfectly with the upgraded 10246-series aluminum bellcranks. Genuine Traxxas accessories are made by Traxxas, for Traxxas, to guarantee a perfect factory fit every time.

189,-

209,-

KJØP
-10%
Hovedbilde Traxxas 8715 Speed Bit Set Hex Drive (1.5/2.0/2.5mm)
Traxxas 8715 Speed Bit Set Hex Drive (1.5/2.0/2.5mm)
Speed Bit Set, hex driver, 3-piece straight (1.5mm, 2.0mm, 2.5mm), 1/4" drive

359,-

379,-

KJØP
-5%
Hovedbilde Traxxas 6468 Tire Glue TRX Ultra Premium Hovedbilde Traxxas 6468 Tire Glue TRX Ultra Premium
Traxxas 6468 Tire Glue TRX Ultra Premium
  Traxxas Ultra Premium Tire Glue Ultra Premium Tire Glue (#6468) with packageOnly one tire glue is certified for use with the 100+mph XO-1: Traxxas Ultra Premium Tire Glue. The XO-1 relies on a high-strength tire bond to withstand incredible centrifugal forces at speeds in excess of 100mph. No other glue endures such high loads, which makes Traxxas Ultra Premium Tire Glue the ultimate adhesive for any tire and rim combination (and any other application that requires a high-strength bond).  To preserve the maximum bonding power of Traxxas Ultra Premium Tire Glue, its bottle is specially designed to maintain a tight seal and prevent clogging. The bottle and nozzle are made of glue-resistant material, and a pin integrated into the tightly-fitting screw-on cap assures glue won't clog the bottle tip. The tip's fine opening allows precise glue application every time you reach for Traxxas Ultra Premium Tire Glue. Traxxas Ultra Premium Tire Glue is custom-blended exclusively for Traxxas. There simply is no better bond for high-speed, high-power vehicles. Traxxas Ultra Premium Tire Glue Features:   The only glue Traxxas Certified for the 100+mph XO-1 Highest-quality cyanoacrylate (CA) glue available Fine tip opening for precise glue application Tightly-fitting cap with sealing pin Glue-resistant bottle and tip material Includes two precision application tips Content 20gr    

139,-

159,-

KJØP
-13%
Hovedbilde Traxxas 8722 Speed Bits Premium Handle Medium
Traxxas 8722 Speed Bits Premium Handle Medium
Speed bit handle, premium (rubber overmold), medium size

109,-

119,-

KJØP
-8%
Hovedbilde RPM 73754 Front Bulkhead Green 1/10 Traxxas 2WD
RPM 73754 Front Bulkhead Green 1/10 Traxxas 2WD
Front Bulkhead for most 1:10 scale Traxxas 2wd Vehicles Quick Notes: – replaces stock Traxxas #2530 & #2530A – fits the Slash 2wd, Nitro Slash, Bandit, electric Rustler, nitro Rustler, nitro Stampede & electric Stampede 2wd (including all Stampede 2wd variants) Description One of the most highly sought-after RPM parts is finally here! The RPM Front Bulkhead for 1:10 scale Traxxas 2wd vehicles is the ultimate in design, strength and durability. Our engineers reviewed the stock front bulkhead and found something curious. The stock front bulkhead does not sit flat, which can seriously affect suspension settings and adjustments! The RPM Front Bulkhead sits flawlessly level, meaning your front kick angle and A-arm angles will be perfect, providing a superior platform for precise suspension adjustments. We also cored out the bottom of the bulkhead. Why? First and foremost, it helps the bulkhead sit flat. Next, it significantly reduces the weight of the bulkhead. Our version is more that 15% lighter* than stock! By coring out the bottom of the bulkhead, it allows a convenient place to stick some modeling clay to adjust the weight bias of the truck. Leave the weight out if you want the front light; add it in if you want it heavier. We also include a handy dust plate to cover the bottom of the bulkhead on vehicles such as the Rustler, Stampede and Bandit that leave the bottom exposed. The dust plate prevents build-up of dirt and debris, which could affect the handling and weight of the truck. Each RPM Front Bulkhead is built from our bulletproof blend of engineering grade nylons, made right here in the USA and comes with our limited lifetime warranty against breakage. If you want strength you can count on and engineering you can trust, look no further than RPM! Tech Notes: RPM Front Bulkheads for 2wd Traxxas 1:10 scale vehicles are stock replacement parts and replace stock Traxxas #2530 & #2530A. This bulkhead fits the following vehicles: Slash 2wd, Nitro Slash, Bandit, electric Rustler, nitro Rustler, nitro Stampede & electric Stampede 2wd (including all Stampede 2wd variants). It does not fit the 4×4 versions of any of these vehicles.

159,-

179,-

KJØP
-11%
Hovedbilde Traxxas 1664T Shock Shafts Long Nitro Rustler (2)
Traxxas 1664T Shock Shafts Long Nitro Rustler (2)
There are the Long Shock Shafts for the Traxxas Nitro Rustler. FEATURES: Hardened steel and titanium nitride coated (Brass color) INCLUDES: Two shafts REQUIRES: Installation in shock SPECS:    Diameter: 3mm (0.118")           Length: 47 mm (1.85")           Thread: 3mm (0.118") COMMENTS: Uses 3mm e-clips

119,-

KJØP
Hovedbilde Robinson Racing 7857 Steel Idler Gear ...
Robinson Racing 7857 Steel Idler Gear ...
This is the optional Robinson Racing Steel Idler Gear for the Traxxas 1/10 scale Slash 2WD. FEATURES: Constructed of hardened steel INCLUDES: Steel Idler Gear REQUIRES: Installing bearings from stock idler gear

299,-

KJØP
Hovedbilde Traxxas 2656T Shock Shafts Titanium XX-Long (2)
Traxxas 2656T Shock Shafts Titanium XX-Long (2)
 These are the Optional Titanium Nitride coated                       XX-long Shock Shafts from Traxxas. FEATURES: Features a Titanium Nitride coating for increased durability.           These shock shafts have a Gold color finish. INCLUDES: Two XX-Long Shock Shafts REQUIRES: Two XX-long Traxxas shocks SPECS: Length- 2.1"(52.8mm)        Diameter- 0.1"(3mm)

119,-

KJØP
Hovedbilde Traxxas 2443 Camber Link Rear 56mm(cc) Complete (2) Hovedbilde Traxxas 2443 Camber Link Rear 56mm(cc) Complete (2)
Traxxas 2443 Camber Link Rear 56mm(cc) Complete (2)
Turnbuckles, camber link, 36mm (56mm center to center) (rear) (assembled with rod ends and hollow balls) (1 left, 1 right)

79,-

89,-

KJØP
-11%
Hovedbilde Traxxas 3735 Bumper Front Kit (for LED Lights) Bandit, ...
Traxxas 3735 Bumper Front Kit (for LED Lights) Bandit, ...
Bumper, front/ 4x12 CCS (2) (fits 2WD Rustler® or Bandit®) (for LED light kit installation)

79,-

KJØP
Hovedbilde Traxxas 7171 Wheels, dished 2.2'' (white)
Traxxas 7171 Wheels, dished 2.2'' (white)
Wheels, dished 2.2" (white) (2)

79,-

KJØP

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png