Hopp til innhold
Hjem / Reservedeler/Option-parts / Option Parts Biler / Traxxas El-Biler / Rustler VXL / Traxxas 3678A Wheelie Bar Assembled Green

Traxxas 3678A Wheelie Bar Assembled Green

Art.nr: TRX 3678A

179,-

Traxxas

Traxxas
På lager: 3

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

         This is an optional Wheelie Bar in Green for the Traxxas
                   Electric Stampede, Rustler and Bandit.

FEATURES: Constructed of hardened plastic, neon green in color
          Installs at rear of chassis to prevent vehicle from flipping over
            during wheelies

INCLUDES: Assembled optional Wheelie Bar with mounting instructions and
            hardware

REQUIRES: Fastening to rear of chassis

Produsent

Traxxas

Traxxas

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

Hovedbilde Traxxas 9450 Drive Shafts (2) Drag Slash, Bandit
Traxxas 9450 Drive Shafts (2) Drag Slash, Bandit
Traxxas Drive Shafts (2) Drag Slash, Bandit Driveshaft assembly (1), left or right (fully assembled, ready to install)/ screw pin (1)   Replacement part for these models: Drag Slash Accessory part for these models: Bandit® VXL Bandit® XL5

149,-

159,-

KJØP
-6%
Hovedbilde Traxxas 5891 Tires & Wheels Paddel/ Split-Spoke ...
Traxxas 5891 Tires & Wheels Paddel/ Split-Spoke ...
Tires & wheels, assembled, glued (SCT Split-Spoke satin chrome, beadlock style wheels, paddle tires, foam inserts) (2) (4WD front/rear, 2WD rear only) (TSM rated)   Fits: 1/10 4WD Short Course Trucks Front & Rear 1/10 2WD Short Course Trucks Rear       Scale: 1/10 Size: 3,8 Inch Suit: Short Course Special: Traxxas TSM-Rated

459,-

479,-

KJØP
-4%
Hovedbilde Traxxas 4976 Wheels (4) Axles Maxx Wheelie Bar (2)
Traxxas 4976 Wheels (4) Axles Maxx Wheelie Bar (2)
 These are the Wheelie Bar Wheels for the Traxxas 3.3 T-Maxx. FEATURES: Constructed of hard plastic           Axles constructed of steel INCLUDES: Four wheels and two axles REQUIRES: Installing on wheelie bar SPECS:    Thickness: 0.39" (10mm)           Diameter:  1.02" (26.1mm)

49,-

KJØP
Hovedbilde RPM 80402 Shock Shaft Guard Black Traxxas (4)
RPM 80402 Shock Shaft Guard Black Traxxas (4)
Shock Shaft Guards for Traxxas & Durango 1/10th Scale Shocks Quick Notes: – fits Traxxas 1:10 scale Ultra and “Big Bore” shocks – fits Durango 1:10 scale shocks Description Rocks, dirt and debris striking shock shafts lead to dents, dings and burrs, which in turn, leads to torn shock seals. Torn shock seals means leaky shocks and poor shock performance. RPM Shock Shaft Guards shield the shock shaft from those deteriorating elements, prolonging the life of the shock shaft, which improves the long-term performance of the suspension and in turn, prolongs the time between shock rebuilds! RPM Shock Shaft Guards are a simple design, replacing your stock shock spring cup with one that has a thin but tough shield rising up to the base of the shock body, completely blocking debris from striking the shock shaft. The back and sides are open, which prevents debris from building inside the guard as well. The kit comes with replacement oversized shock rod ends, improving durability and consistency on the shock pivot ball. Additionally, we redesigned the top of the rod end so it is square. That square end keys the shock shaft guard for directional control. The front shield of the guard covers over 100 degrees of frontal exposure! RPM Shock Shaft Guards are zero friction protection devices, meaning the guard never touches the working elements of the shock. RPM Shock Shaft Guards are sold in sets of four, including four rod ends for the shocks and are stock replacement items. Nothing more is needed for installation. Check out this partial list of vehicles they will fit: Slash 2wd, Slash 4×4, Stampede 4×4, nitro and electric versions of the Stampede 2wd and Rustler, Bandit, Nitro Sport, T-Maxx & E-Maxx (see tech notes below), and many more including vintage and legacy models. RPM Shock Shaft Guards are available in Black, Green, Blue and our Dyeable White materials.  Tech Notes: RPM Shock Shaft Guards fit all Traxxas 1/10th scale molded shocks as well as Traxxas Big Bore shocks but will not fit the Traxxas Jato or GTR shocks. They fit the T-Maxx and E-Maxx but will not work with RPM T/E-Maxx A-arms due to clearance limitations on the upper arm.    

129,-

149,-

KJØP
-13%
Hovedbilde Traxxas 4676 Spur Gear 48P 76T
Traxxas 4676 Spur Gear 48P 76T
This is a 48P, 76T Spur Gear for models with                     Traxxas Torque Control Slipper Clutch. FEATURES: 48 pitch           76 tooth           Designed for models with a slipper clutch.           Black plastic construction INCLUDES: One spur gear SPECS:    Pitch:   48           Tooth:   76

39,-

KJØP
Hovedbilde Traxxas 3752 Stub Axle Carriers (2)
Traxxas 3752 Stub Axle Carriers (2)
This is a pair of Stub Axle Carriers                for the Traxxas Bandit, Stampede and Rustler VXL. FEATURES: Molded nylon construction (black) INCLUDES: Two stub axle carriers REQUIRES: Installation on the vehicle

39,-

KJØP
Hovedbilde Traxxas 5136X Differential Oil Kit Revo
Traxxas 5136X Differential Oil Kit Revo
This is the Diff Oil Kit for the Revo by Traxxas. FEATURES: Three bottles of oil (10K,30K,50K weights). INCLUDES: Three 2oz (59ml) bottles of oil           Three pour spouts

249,-

KJØP
Hovedbilde Traxxas 9195 69mm Fixed-Length Front Camber Links (2) ...
Traxxas 9195 69mm Fixed-Length Front Camber Links (2) ...
Traxxas 9195 - Camber links, front (molded composite) (69mm center to center) (2) (assembled with hollow balls) (for use with #9180 or 9181 upgrade kit). Does not fit bandit.

69,-

KJØP
Hovedbilde Traxxas 9181-GRN Outer Driveline & Suspension EHD ...
Traxxas 9181-GRN Outer Driveline & Suspension EHD ...
Traxxas 9181-GRN - 2WD Extreme Heavy Duty Upgrade Kit The Extreme Heavy Duty Upgrade Kit transforms your already-tough 2WD Slash® or 2WD Raptor® into the ultimate bashing machine. Engineered for brushless power systems, the kit includes a full complement of driveline and suspension parts designed to work together as a complete package. Whether you're sending it at the skate park or preparing for a speed run, the Extreme Heavy Duty Upgrade Kit is battle-hardened to withstand brutal punishment and come back for more. Compatible with 2WD Slash and Raptor Extreme Heavy Duty Upgrade Kit Features: ­Heavy duty caster blocks, steering blocks, and hub carriers Extreme Heavy Duty driveshafts HD front and rear suspension arms One-piece HD camber and toe links Steel rear wheel hexes Sealed outer bearings Hex hardware included Compatible with existing aluminum accessories­ ­ Easy to Install This all-inclusive package comes with everything needed to transform your truck. Designed to work as a complete package, everything fits together with perfect precision. This kit includes replacement hardware and works with existing aluminum accessories. Extreme HD Driveshafts High-performance Extreme Heavy Duty driveshafts are larger in diameter than standard driveshafts and feature beefed-up U-joints built to handle brushless power with ease. The telescoping shafts provide superior suspension articulation for excellent shock absorbtion and tighter turning. Heavy Duty Suspension Arms Molded from our toughest composite material, these heavy duty front and rear suspension arms provide just the right amount of flex to resist breaking. Heavy duty suspension arms stand up to even the most punishing drivers for non-stop bashing. Heavy Duty Caster & Steering Blocks Heavy duty caster and steering blocks are beefed up with extra material for even more strength. Built to take a pounding, these highly upgraded parts outfit your 2WD Slash or Raptor for your wildest adventures. Heavy Duty Axle Carriers Heavy duty axle carriers add more material where it's needed most. In addition to their overbuilt construction, both the steering blocks and axle carriers include sealed bearings for ultimate durability and precision.

1.249,-

1.349,-

KJØP
-7%
Hovedbilde Hobbywing 30404501 QuicRun 3660 G2 Brushless Motor ...
Hobbywing 30404501 QuicRun 3660 G2 Brushless Motor ...
Sensorløs 2-3s LiPo 1/10 Sensorløs børsteløs motor som blant annet passer 1/10-biler. Denne motoren skal brukes på 2-3S LiPo. Leveres med ferdigloddet med 4mm gullkontakter. Dette produktet leveres uten sensorkabel og vil ikke funke med andre Hobbywing-enheter som ikke bruker det samme systemet. Spesifikasjoner Akseldiameter 5mm Diameter 36mm Lengde 60mm Vekt 278g KV 3700 Gullkontakter (male) 4.0mm

495,-

KJØP
Hovedbilde Traxxas 3626R Mounting Plate ESC/Receiver Box (Long ...
Traxxas 3626R Mounting Plate ESC/Receiver Box (Long ...
Mounting plate, electronic speed control/receiver box (for installation of XL-5/VXL and waterproof receiver box into Stampede®)

39,-

KJØP
Hovedbilde Traxxas 3622X Main Chassis Black (Long Battery) Truck ...
Traxxas 3622X Main Chassis Black (Long Battery) Truck ...
Main chassis (black) (164mm long battery compartment) (fits both flat and hump style battery packs) (use only with #3626R ESC mounting plate)

119,-

KJØP
Hovedbilde Traxxas 6852A Driveshaft assembly, rear, extreme heavy ...
Traxxas 6852A Driveshaft assembly, rear, extreme heavy ...
Driveshaft assembly, rear, extreme heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1)

149,-

169,-

KJØP
-12%
Hovedbilde Traxxas 5831 Lower Chassis Low CG Black
Traxxas 5831 Lower Chassis Low CG Black
This is the Lower Chassis for use with the  optional Traxxas #5830 Slash 2WD Low CG Conversion Kit.     FEATURES Plastic construction, black in color  Fastens under front section of low CG chassis   INCLUDES Lower Chassis in Black   SPECIFICATIONS  Length: 5.6" (142mm)  Width: 3.1" (79mm) at widest point   COMMENTS Must be used with the #5830 Low CG Conversion Kit. Will not fit on  stock Slash 2WD chassis.

79,-

89,-

KJØP
-11%
Hovedbilde Tamiya 86021 PS-21 Polycarbonate Spray Park Green 3 oz
Tamiya 86021 PS-21 Polycarbonate Spray Park Green 3 oz
 This is Tamiya Color Spray Lacquer for Polycarbonate (PS-21 Park Green).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.

109,-

KJØP
Hovedbilde Tamiya 86005 PS-5 Polycarbonate Spray Black 3 oz
Tamiya 86005 PS-5 Polycarbonate Spray Black 3 oz
  This is Tamiya Color Spray Lacquer for Polycarbonate (PS-5 Black).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.

109,-

119,-

KJØP
-8%
Hovedbilde Traxxas 3637 Front Axles (2)
Traxxas 3637 Front Axles (2)
This is a Pair of Stock Replacement Front Axles for the Rustler and Stampede.              These are located in the front steering blocks. FEATURES: Steel construction           Natural color INCLUDES: Two front axles REQUIRES: Nothing.  These are direct replacement parts. SPECS:    Length: 32mm (1.26")           Diameter: 5mm COMMENTS: These will not work for the nitro versions.  For that axle, use TRX 2536,         

39,-

KJØP
Hovedbilde RPM 80832 Rear Shock Tower for Slash 2WD, Stampede 2WD ...
RPM 80832 Rear Shock Tower for Slash 2WD, Stampede 2WD ...
RPM Rear Shock Tower for Slash 2WD, Stampede 2WD & Rustler 2WD Replaces stock Traxxas #3638 Quick Notes: Replaces stock Traxxas #3638 Fits Traxxas Slash 2WD, Stampede 2WD & Rustler 2WD Also fits the Bandit but see the “Tech Notes” below for important information Optional Front Shock Tower is also available RPM rear shock towers for the electric versions of the Slash, Stampede, Rustler & Bandit were designed with one thing in mind – rugged durability. Once again, we’ve exceeded our own expectations with this shock tower. While we’ve maintained all stock geometry on these shock towers, we’ve beefed them up in all the right places to eliminate annoying rear shock tower breakage. Our version of this shock tower uses an I-Beam construction that improves durability and rigidity as well. At the base of the shock tower, we’ve improved the screws’ head clearance of the bulkhead mounting screws to eliminate the bind normally associated with the stock rear shock tower. All these design elements combine to create the ultimate lightweight, bulletproof rear shock tower for the electric versions of the Slash, Rustler & Stampede. RPM rear shock towers for the Traxxas Slash, Electric Stampede, Electric Rustler & Bandit are molded in black and are backed by our famous breakage warranty. These towers are direct replacement parts for ease of installation. Tech Notes: These rear shock towers can be used on the Traxxas Bandit. However, there are no provisions for a rear wing built in.

99,-

Ikke på lager
Hovedbilde Traxxas 3931 Flat Head Machine Hex Drive Screws 3x8mm ...
Traxxas 3931 Flat Head Machine Hex Drive Screws 3x8mm ...
These are the Traxxas Flathead 3 x 8mm Screws. FEATURES: Metal construction           Black in color INCLUDES: Six 3 x 8mm Flathead Hex Screws REQUIRES: Installation on the vehicle

35,-

Ikke på lager
Hovedbilde Traxxas 5352T Heavy Duty Rebuild Kit Revo/Maxx Trucks
Traxxas 5352T Heavy Duty Rebuild Kit Revo/Maxx Trucks
Traxxas 5352T - Rebuild kit (heavy duty), slipper clutch (steel disc/ aluminum friction pads (3)/ spring (1)/ 2x9.8mm pin/ 5x8mm MW/ 5.0mm NL (1)/ 4.0mm NL (1))

119,-

129,-

KJØP
-8%
Hovedbilde SKYRC 500023-03 GPS (GNSS) GSM020 Performance Analyzer ... Hovedbilde SKYRC 500023-03 GPS (GNSS) GSM020 Performance Analyzer ...
SKYRC 500023-03 GPS (GNSS) GSM020 Performance Analyzer ...
SkyRC GSM020 - GNSS+GPS Performance Analyser How many times have you buddy mocked you were bragging your RC machine goes over 100-blah-blah mph? We're betting too many times. So there are few ways to prove your RC car or plane is the fastest on earth. Now SkyRC delivers an app-enabled GNSS Performance Analyzer in an affordable and compact design. RC gurus now have a cutting edge gauge to measure the overall performance of their RC gadgets accurately. Just use an app on your smartphone, strap it to your car, and track the speed. You can mount to almost any RC vehicle, and it does a lot more than just display speed. To tell the truth before and after modifications. Knowledge is power! By knowing the facts before and after modifications, your efforts will not be in vain. GNSS Performance Meter will help you make sense of the improvements and help you make educated decisions to make sure you’re not spinning your wheels. For everyone trying to gauge their performance, here's an affordable way to do just that. Just got some new mods installed? Get some real feedback, really quickly. This is a professional-grade instrument accessible to enthusiasts. It’s every modeler’s dream. Enjoy! Improved accuracy by tracking two satellite constellations The GNSS Performance Analyzer supports GNSS(Global Navigation Satellite System) with GPS and GLONASS system that means more satellites are orbiting the earth. The advantage of this many satellites will definitely improve positional accuracy by tracking two satellite constellations instead of just GPS. Small but Versatile GNSS Performance Analyzer（GSM020) allows you to measure and analyze many aspects of your RC car & airplane’s performance using the latest GNSS engine (GPS, GLONASS) which gives you Acceleration, G-force, Speed, Time, Distance, High and Vertical Velocity. With its compact size and internal antenna, it is an ideal choice for mounting on RC vehicles & airplanes. Case Size: 40 x 39 x 16mm Weight: 38g Peace of mind with built-in LiPo battery The 5 hours' up-time on the built-in rechargeable LiPo battery can give enough racing time to RC drivers or pilots in the field! With the micro USB charging port, it is very convenient to connect it to a USB port or another compatible USB power source for charging.     Go mobile with the app! Visual LED indicator The GNSS Analyzer is equipped with 3 LED indicators, signaling different operating modes. Open GNSS PA on the smartphone, the analyzer’s Bluetooth icon will stay steady blue, reflecting the device is connected; the satellite icon will stay steady green after a while of successful GNSS signal acquisition. Built-in 1M Memory The built-in 1M memory can record up to 50 records. And all the data can be transferred to the smartphone for analyzing! When the Flash is full, the previous record will be replaced automatically. Now you don't have to think about clearing data all the time or worry about missing the critical tracking data when the memory is full. Specifications: Concurrent reception of GPS & GLONASS signals Receiver: L1, 1575.42 MHz Update Frequency: 10 Hz Satelite signal reception sensitivity: -167dBm Size: 39x40x16 mm Weight: 35 g Operating Temperature: 0° to +40°C Stotrage Temperature: -10°C to +70°C Operating Humidity: 5% to 90%

995,-

KJØP
Hovedbilde Traxxas 6511 Link Bluetooth Wireless Module TQi
Traxxas 6511 Link Bluetooth Wireless Module TQi
This is the Traxxas Link TQi Wireless Module. FEATURES For use with the Traxxas Link app and TQi radio system Compatible with iPhone (4S or later) iPad (3rd gen and later) iPod touch (5th gen and later) iPad mini Allows driver to view real time telemetry with optional sensors (sensors not included) Compatible with Android 4.4 and up or Apple iOS 4.3 and later platforms INCLUDES Traxxas Link TQi Wireless Module 1.5mm Hex Wrench 1.5x5mm Hex Head Screw SPECIFICATIONS Dimensions: 1.2 x 1.8 x 0.42" (31.5 x 46.8 x 10.8mm) Weight: 0.26oz (7.5g)

479,-

529,-

KJØP
-9%
Hovedbilde Traxxas 3631 Suspension Arms Front (2)
Traxxas 3631 Suspension Arms Front (2)
This is the Traxxas replacement #3631 Front Suspension Arms for for the Stampede and Rustler. FEATURES:    Made from black molded nylon    For the Traxxas Stampede and Rustler. SPECS:    Length: 3 1/4"    Thickness: 3/8"    Width at end near chassis: 1 1/2"    Width at end near wheels: 7/8" INCLUDES:    (2) Front suspension arms for the Traxxas Stampede.

99,-

KJØP
Hovedbilde Traxxas Battery Door TQ 2.4 Transmitter
Traxxas Battery Door TQ 2.4 Transmitter
This is the Battery Door for the Traxxas TQ Transmitter. Fits 6516,6517,6528,6529,6530     FEATURES Plastic construction Fits two and three channel TQ transmitters Installs on bottom of transmitter and protects battery compartment     INCLUDES Battery Door for the Traxxas TQ Transmitter     COMMENTS Will not fit the TQi transmitters. For the battery door for the TQi, order TRX 6546

49,-

KJØP
Hovedbilde Traxxas 3639 Shock Tower Front
Traxxas 3639 Shock Tower Front
This is a stock replacement FRONT shock tower for the Traxxas Stampede. FEATURES:    Made from black molded nylon    For the Traxxas Stampede SPECS:    Height: 2 3/4"    Thickness: 1/4"    Width at base: 2 3/4"    Width at top: 2" INCLUDES:    (1) Front shock tower for the Traxxas Stampede

59,-

KJØP

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png