Traxxas

-11%

Traxxas 2443 Camber Link Rear 56mm(cc) Complete (2)

Art.nr: TRX 2443

79,-

~~89,-~~

- 11%

Traxxas

Traxxas

På lager: 6

Du vil motta en e-post så snart produktet er på lager!

En feil har oppstått. Prøv igjen

Informasjon
Produsent

Informasjon

Turnbuckles, camber link, 36mm (56mm center to center) (rear) (assembled with rod ends and hollow balls) (1 left, 1 right)

Produsent

Traxxas

Traxxas

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

Hovedbilde Traxxas 5891 Tires & Wheels Paddel/ Split-Spoke ...

Traxxas 5891 Tires & Wheels Paddel/ Split-Spoke ...

Tires & wheels, assembled, glued (SCT Split-Spoke satin chrome, beadlock style wheels, paddle tires, foam inserts) (2) (4WD front/rear, 2WD rear only) (TSM rated) Fits: 1/10 4WD Short Course Trucks Front & Rear 1/10 2WD Short Course Trucks Rear Scale: 1/10 Size: 3,8 Inch Suit: Short Course Special: Traxxas TSM-Rated

459,-

479,-

-4%

Hovedbilde Traxxas 4976 Wheels (4) Axles Maxx Wheelie Bar (2)

Traxxas 4976 Wheels (4) Axles Maxx Wheelie Bar (2)

These are the Wheelie Bar Wheels for the Traxxas 3.3 T-Maxx. FEATURES: Constructed of hard plastic Axles constructed of steel INCLUDES: Four wheels and two axles REQUIRES: Installing on wheelie bar SPECS: Thickness: 0.39" (10mm) Diameter: 1.02" (26.1mm)

49,-

Hovedbilde RPM 80402 Shock Shaft Guard Black Traxxas (4)

RPM 80402 Shock Shaft Guard Black Traxxas (4)

Shock Shaft Guards for Traxxas & Durango 1/10th Scale Shocks Quick Notes: – fits Traxxas 1:10 scale Ultra and “Big Bore” shocks – fits Durango 1:10 scale shocks Description Rocks, dirt and debris striking shock shafts lead to dents, dings and burrs, which in turn, leads to torn shock seals. Torn shock seals means leaky shocks and poor shock performance. RPM Shock Shaft Guards shield the shock shaft from those deteriorating elements, prolonging the life of the shock shaft, which improves the long-term performance of the suspension and in turn, prolongs the time between shock rebuilds! RPM Shock Shaft Guards are a simple design, replacing your stock shock spring cup with one that has a thin but tough shield rising up to the base of the shock body, completely blocking debris from striking the shock shaft. The back and sides are open, which prevents debris from building inside the guard as well. The kit comes with replacement oversized shock rod ends, improving durability and consistency on the shock pivot ball. Additionally, we redesigned the top of the rod end so it is square. That square end keys the shock shaft guard for directional control. The front shield of the guard covers over 100 degrees of frontal exposure! RPM Shock Shaft Guards are zero friction protection devices, meaning the guard never touches the working elements of the shock. RPM Shock Shaft Guards are sold in sets of four, including four rod ends for the shocks and are stock replacement items. Nothing more is needed for installation. Check out this partial list of vehicles they will fit: Slash 2wd, Slash 4×4, Stampede 4×4, nitro and electric versions of the Stampede 2wd and Rustler, Bandit, Nitro Sport, T-Maxx & E-Maxx (see tech notes below), and many more including vintage and legacy models. RPM Shock Shaft Guards are available in Black, Green, Blue and our Dyeable White materials. Tech Notes: RPM Shock Shaft Guards fit all Traxxas 1/10th scale molded shocks as well as Traxxas Big Bore shocks but will not fit the Traxxas Jato or GTR shocks. They fit the T-Maxx and E-Maxx but will not work with RPM T/E-Maxx A-arms due to clearance limitations on the upper arm.

129,-

149,-

-13%

Hovedbilde Traxxas 5136X Differential Oil Kit Revo

Traxxas 5136X Differential Oil Kit Revo

This is the Diff Oil Kit for the Revo by Traxxas. FEATURES: Three bottles of oil (10K,30K,50K weights). INCLUDES: Three 2oz (59ml) bottles of oil Three pour spouts

249,-

Hovedbilde Surpass Hobby 3660 3500KV Sensorless BL WP 5mm Aksel

Hovedbilde Surpass Hobby 3660 3500KV Sensorless BL WP 5mm Aksel

Surpass Hobby 3660 3500KV Sensorless BL WP 5mm Aksel

Surpass Hobby 3660 3500KV Sensorless BL. Vannavstøtende børsteløs motor for 1/10 biler for opptil 3S(13V). Spesifikasjoner motor: Størrelse 3660 Dimensjoner Ø36x65mm Aksling 5.0 mm Vekt ca 260gram

389,-

Hovedbilde Traxxas 2750A Suspension Arms Rear HD Black (2) Drag ...

Traxxas 2750A Suspension Arms Rear HD Black (2) Drag ...

Suspension arms, black, rear (left & right), heavy duty (2)

139,-

Hovedbilde Traxxas 9488 Hardware Kit Complete 2WD VXL w/ 272R

Traxxas 9488 Hardware Kit Complete 2WD VXL w/ 272R

Traxxas 9488 - Hardware Kit Replacement 2WD VXL Replacement hardware kit, steel. Compatible with Pro series or standard Magnum 272 transmissions. Replacement set for these 2WD models: Slash VXL Bandit VXL Stampede VXL Rustler VXL

399,-

429,-

-7%

Hovedbilde Traxxas 9497 LED Lights Rear Set Black Chevrolet C10

Traxxas 9497 LED Lights Rear Set Black Chevrolet C10

LED lights, tail lights (red)/ power harness/ tail light housings (left & right)/ tailgate trim (black)/ zip ties (3)

399,-

Hovedbilde Traxxas 9418 Shock Tower Rear Drag Slash

Traxxas 9418 Shock Tower Rear Drag Slash

Traxxas Shock Tower Rear Drag Slash

59,-

Hovedbilde Traxxas 5642 Pinion Gear 13T 32P (5mm axle)

Traxxas 5642 Pinion Gear 13T 32P (5mm axle)

Gear, 13-T pinion (0.8 metric pitch, compatible with 32-pitch) (fits 5mm shaft)/ set screw

59,-

69,-

-14%

Hovedbilde Traxxas 4628 Yokes Countersunk Grub Screw BE

Traxxas 4628 Yokes Countersunk Grub Screw BE

This is the Replacement Yokes Set from Traxxas. FEATURES: White nylon differential output yokes. Stainless steel countersunk screws with phillips drive. Black steel grub screws. Used on the Traxxas Blue Eagle series, Hawk series, Radicator series, and Stampede. INCLUDES: 2 White nylon yokes 4 3x3mm set screws (.5 pitch) 2 3x5mm countersunk screws (.5 pitch) 2 3x12mm yoke pins threaded 5mm on one end (.5 pitch)

49,-

Hovedbilde Traxxas 4628X Steel Drive Yokes Rustler/Stampede/Slash ...

Traxxas 4628X Steel Drive Yokes Rustler/Stampede/Slash ...

These are hardened steel drive yokes for the Traxxas Rustler,Slash 2wd and Stampede. FEATURES: Hardened steel construction and is stronger than stock parts. These yokes also come with U-Joints pre-installed for ease of installation. INCLUDES: Two hardened steel yokes with pre-installed U-Joints. REQUIRES: Nothing, this part is a direct fit for stock drive yokes, only harder COMMENTS: This is a "hop-up" part, not stock.

249,-

279,-

-11%

Hovedbilde Traxxas 1654 Wheel Hubs (2)

Traxxas 1654 Wheel Hubs (2)

Wheel hubs, hex (2)/ stub axle pins (4)

35,-

Hovedbilde Yeah Racing TEC4-019 STEEL G45 FRONT UNIVERSAL SHAFT

Yeah Racing TEC4-019 STEEL G45 FRONT UNIVERSAL SHAFT

Yeah Racing Steel G45 Front Universal Shaft For Traxxas Ford GT 4 Tec 2.0 #TEC4-019 Description: These are the Yeah Racing G45 Universal Steel Shaft Swing For Traxxas's 4 Tec 2.0. Universal swing shafts are made from durable, high quality hardened G45 Steel which means a stronger drivetrain which will translate to better throttle response Feature: For: Traxxas 4Tec 2.0 / 3.0 Material: Steel Color: Black Include: Universal Steel Shafts (2 pcs) Yeah Racing Steel G45 Front Universal Steel Shaft For Traxxas Ford GT 4 Tec 2.0 Description: These are the Yeah Racing G45 Universal Steel Shaft Swing For Traxxas's 4 Tec 2.0. Universal swing shafts are made from durable, high quality hardened G45 Steel which means a stronger drivetrain which will translate to better throttle response Feature: For: Traxxas 4Tec 2.0 / 3.0 Material: Steel Color: Black Include: Universal Steel Shafts (2 pcs)

129,-

149,-

-13%

Hovedbilde

"Bulk" Traxxas 2437 Front Axles Bandit

*** This is a Brand new item taken from a kit (chopped part), therefore will not have a Traxxas packaging *** "Bulk" Traxxas 2437 Front Axles Bandit This is a pair of Front Axles for the Traxxas Bandit Buggy Kit and the Ready To Run version. FEATURES: Constructed of steel. INCLUDES: Two Front Axles for the Traxxas Bandit Buggy Kit and Ready to Run Version SPECS: Length: 0.94" (24mm) Length of threaded area: 0.14" (3.5mm) Thread size: 0.16" (4mm) REQUIRES: Placing each axle into the Steering Blocks TRX 3636, and installing Stub Axle Pins TRX 2754.

39,-

Hovedbilde Traxxas 2750R Suspension arms, long (rear)

Traxxas 2750R Suspension arms, long (rear)

Suspension arms, long (rear) for Traxxas Bandit.

95,-

Hovedbilde Traxxas 2432 Caster Blocks Left/Right

Traxxas 2432 Caster Blocks Left/Right

These are Left and Right Caster Blocks for the Traxxas Bandit XL5 . Traxxas Bandit VXL Traxxas Drag Slash 1967 Chevrolet® C10 Truck Traxxas Drag Slash Ford® Mustang® 5.0 On the other cars it is TRX 3632 that fits. FEATURES: Black Plastic Caster Blocks INCLUDES: One Left Block One Right Block REQUIRES: Traxxas Bandit COMMENTS: None

49,-

59,-

-17%

Hovedbilde Traxxas 3636 Steering Block (2)

Traxxas 3636 Steering Block (2)

Traxxas Bandit. They are made of black reinforced nylon and are what the front axles go through. Steering blocks, left & right (2) (requires 5x11x4mm bearings) PACKAGE INCLUDES: Two steering blocks (one left and one right)

39,-

Hovedbilde Traxxas 3740 Pins 2.5x31.5mm Rustler (2)

Traxxas 3740 Pins 2.5x31.5mm Rustler (2)

This is the 2.5x31.5mm Pins with E-clips. FEATURES: Made of stainless steel This is used to hold the front steering block (TRX 3636) to the castor block ((TRX 3632) on the electric (not Nitro) Rustler Also called the vertical kingpin INCLUDES: 2 Pins (kingpins) 4 2.5mm e-clips

29,-

Hovedbilde Traxxas 5833 Nerf Bars LCG Black (Pair) Slash 2WD

Traxxas 5833 Nerf Bars LCG Black (Pair) Slash 2WD

Traxxas 5833 Nerf Bars LCG Black (Pair) Slash 2WD These are the Low CG Nerf Bars in Blue for the 1/10 scale 2WD Traxxas Slash. FEATURES Plastic construction, Black in color For use with the Low CG chassis in Black, or Blue Fastens to sides of chassis to absorb impacts INCLUDES Two Nerf Bars

49,-

Hovedbilde Traxxas 2531X Suspension Arms Front (2)

Traxxas 2531X Suspension Arms Front (2)

Denne erstatter TRX 2531 These are the Replacement Front Suspension Arms for many Traxxas kits. These are located on the front bulkhead and are held on by suspension pins. FEATURES: Nylon construction Black in color INCLUDES: Two black nylon suspension arms REQUIRES: Assembly onto kit. SPECS: Length: 3" Width: 1.2" COMMENTS: This will work on the Bandit, Nitro Stampede, Nitro Rustler, SRT, and the Nitro Sport.

129,-

Hovedbilde Traxxas 5831 Lower Chassis Low CG Black

Traxxas 5831 Lower Chassis Low CG Black

This is the Lower Chassis for use with the optional Traxxas #5830 Slash 2WD Low CG Conversion Kit. FEATURES Plastic construction, black in color Fastens under front section of low CG chassis INCLUDES Lower Chassis in Black SPECIFICATIONS Length: 5.6" (142mm) Width: 3.1" (79mm) at widest point COMMENTS Must be used with the #5830 Low CG Conversion Kit. Will not fit on stock Slash 2WD chassis.

79,-

89,-

-11%

Hovedbilde Traxxas 5832 Chassis LCG Slash 2wd Black (1)

Traxxas 5832 Chassis LCG Slash 2wd Black (1)

Chassis, low CG (black)

229,-

249,-

-8%

Hovedbilde Traxxas 3961 Spur Gear 0.8P 68T

Traxxas 3961 Spur Gear 0.8P 68T

This is the optional .8 Metric Pitch 68 Tooth Spur Gear for the Traxxas E-Maxx. FEATURES: Nylon construction, black in color .8 metric pitch INCLUDES: One 68T 0.8 metric pitch spur gear REQUIRES: Installation on the vehicle SPECS: Diameter: 2.16" (55mm) Thickness: .23" (6mm)

39,-

Hovedbilde Traxxas 4676 Spur Gear 48P 76T

Traxxas 4676 Spur Gear 48P 76T

This is a 48P, 76T Spur Gear for models with Traxxas Torque Control Slipper Clutch. FEATURES: 48 pitch 76 tooth Designed for models with a slipper clutch. Black plastic construction INCLUDES: One spur gear SPECS: Pitch: 48 Tooth: 76

39,-