Name: Traxxas 9418 Shock Tower Rear Drag Slash
Brand: Traxxas
SKU: TRX 9418
Price: 59.00 NOK
Availability: InStock

Surpass Hobby 3660 3500KV Sensorless BL WP 5mm Aksel

Surpass Hobby 3660 3500KV Sensorless BL. Vannavstøtende børsteløs motor for 1/10 biler for opptil 3S(13V). Spesifikasjoner motor: Størrelse 3660 Dimensjoner Ø36x65mm Aksling 5.0 mm Vekt ca 260gram

389,-

KJØP

Traxxas 2750A Suspension Arms Rear HD Black (2) Drag ...

Suspension arms, black, rear (left & right), heavy duty (2)

139,-

KJØP

Traxxas 9488 Hardware Kit Complete 2WD VXL w/ 272R

Traxxas 9488 - Hardware Kit Replacement 2WD VXL Replacement hardware kit, steel. Compatible with Pro series or standard Magnum 272 transmissions. Replacement set for these 2WD models: Slash VXL Bandit VXL Stampede VXL Rustler VXL

399,-

429,-

KJØP

-7%

Traxxas 9497 LED Lights Rear Set Black Chevrolet C10

LED lights, tail lights (red)/ power harness/ tail light housings (left & right)/ tailgate trim (black)/ zip ties (3)

399,-

KJØP

Traxxas 5642 Pinion Gear 13T 32P (5mm axle)

Gear, 13-T pinion (0.8 metric pitch, compatible with 32-pitch) (fits 5mm shaft)/ set screw

59,-

69,-

KJØP

-14%

Traxxas 2443 Camber Link Rear 56mm(cc) Complete (2)

Turnbuckles, camber link, 36mm (56mm center to center) (rear) (assembled with rod ends and hollow balls) (1 left, 1 right)

79,-

89,-

KJØP

-11%

Traxxas 4628 Yokes Countersunk Grub Screw BE

This is the Replacement Yokes Set from Traxxas. FEATURES: White nylon differential output yokes. Stainless steel countersunk screws with phillips drive. Black steel grub screws. Used on the Traxxas Blue Eagle series, Hawk series, Radicator series, and Stampede. INCLUDES: 2 White nylon yokes 4 3x3mm set screws (.5 pitch) 2 3x5mm countersunk screws (.5 pitch) 2 3x12mm yoke pins threaded 5mm on one end (.5 pitch)

49,-

KJØP

Traxxas 1651 Half Shafts U-Joints

This is a pair of half shafts (swing shafts or dog bones) For The Traxxas Bandit And Others TRX 1651 Features: White plastic half shafts with universal joint ends Metal universal joints Includes: (2) inside shafts (2) outside shafts (4) universal joints (metal balls with 4 pins sticking out in a cross pattern)

79,-

KJØP

Traxxas 2753X Stub Axles Rear (2)

These are the Rear Stub Axles for the Traxxas Bandit, Stampede 2WD and Rustler. FEATURES: Metal construction, black and silver in color INCLUDES: Two rear stub axles and pins SPECS: Length: 1.65" (42mm) Diameter: .51" (13mm) at largest point

59,-

79,-

KJØP

-25%

Traxxas 1654 Wheel Hubs (2)

Wheel hubs, hex (2)/ stub axle pins (4)

35,-

KJØP

Traxxas 3640 Suspension Screw Pin Set Steel

These are the Suspension Screws Pins for the Traxxas Rustler, Stampede and Bandit. The hinge pins hold the suspension arms to the bulkheads FEATURES: Durable steel construction INCLUDES: Two 48mm pins Two 34mm pins Two 30mm pins Two 28mm pins Two 25mm pins REQUIRES: Installation on the Rustler, Stampede or Bandit

59,-

69,-

KJØP

-14%

Traxxas 4628X Steel Drive Yokes Rustler/Stampede/Slash ...

These are hardened steel drive yokes for the Traxxas Rustler,Slash 2wd and Stampede. FEATURES: Hardened steel construction and is stronger than stock parts. These yokes also come with U-Joints pre-installed for ease of installation. INCLUDES: Two hardened steel yokes with pre-installed U-Joints. REQUIRES: Nothing, this part is a direct fit for stock drive yokes, only harder COMMENTS: This is a "hop-up" part, not stock.

249,-

279,-

KJØP

-11%

Traxxas 10287-GRN Gear Covers Alu Green Maxx Slash

Traxxas 10287-GRN Cover, gear (green-anodized 6061-T6 aluminum) Add strength and style to your Maxx® Slash® with this aluminum gear cover. The gear cover is machined from tough 6061-T6 aluminum for unbeatable toughness with a brilliant anodized finish. Genuine Traxxas accessories are made by Traxxas, for Traxxas, to guarantee a perfect factory fit every time. Accessory part for these models: Maxx® Slash®

419,-

449,-

KJØP

-7%

RPM 81692 Shock Shaft Guards for Traxxas GTR Shocks

RPM 81692 - Shock Shaft Guards for Traxxas GTR Shocks Notes: Simple, two-piece design Covers over 100° of frontal exposure Zero friction protection devices Works with: Slash Mudboss Slash 4x4 Ultimate Rustler 4x4 Ultimate Traxxas vehicles that are ugraded with GTR shocks RPM Shock Shaft Guards for Traxxas GTR shocks are the ultimate upgrade to protect your expensive GTR shocks. Rocks, dirt and debris striking shock shafts lead to dents, dings and burrs. Damaged shock shafts leads to torn shock seals. Torn shock seals means leaky shocks and poor shock performance. RPM Shock Shaft Guards shield the shock shaft from those deteriorating elements, prolonging the life of the shock shaft. Smoother shafts improve the longevity of the seals and in turn, prolongs the time between shock rebuilds! RPM Shock Shaft Guards for Traxxas GTR shocks are a simple, two-piece design. Our guards replace your stock shock spring cup. We then bolt on a thin but tough shield rising up to the base of the shock body. This shield completely blocks debris from striking the shock shaft. The back and sides are open, which prevents mud and gunk from building inside the guard as well. The front shield of the guard covers over 100° of frontal exposure! RPM Shock Shaft Guards are zero friction protection devices, meaning the guards never touch the moving elements of the shock. RPM Shock Shaft Guards are sold in sets of four; nothing more is needed for installation. For vehicles running Traxxas Ultra Shocks or Big Bore Shocks, please see RPM Shock Shaft Guards for Traxxas & Durango 1/10th Scale Shocks. Tech Notes: RPM Shock Shaft Guards fit all Traxxas GTR shocks, but only work with GTR-upgraded 4×4 versions of the following vehicles: Slash, Rustler, Stampede and Hoss. Please note, due to space constraints, some inner shock mount positions (a-arms and shock towers) may not be compatible with our Shock Shaft Guards. RPM Shock Shaft Guards are not compatible with the UDR or Revo. Specifications See more products

159,-

179,-

KJØP

-11%

Traxxas 6595 Drag Race Start Light

Traxxas Drag Race Start Light No-Prep Race Starts Made Easy! No-prep drag racing is even more fun and exciting with the new Traxxas Drag Race Start Light. The portable, easy-to-use Start Light makes sure every race starts fair and square. There's no need for an extra person on the track to drop a flag or flash a light. The compact Drag Race Start light fits in your pocket and lets you be track-ready as quickly as you can flip the on-switch. Features on Drag Race Start Light: High-intensity LEDs are easily visible even in bright daylight Compact design and easy setup for racing anywhere Ten second countdown to “drivers ready” Random 2-6 second start delay prevents drivers from anticipating the start light Rugged, impact-resistant construction Compact, pocketable size Compatible with the Traxxas wireless winch remote, part #8857 (sold separately) When you compete with the Drag Race Start Light, every race start is fair and foolproof. Just place the Start Light a few feet ahead of the starting line, press the Start button, and stage your car as the countdown light flashes. The starting sequence allows ten seconds to get lined up and ready to launch. The countdown light stops flashing when the start of the race is moments away. When the bright white start light comes on—you’re racing! Random Start Timing With each new race, the Start Light randomly selects a two- to six-second delay between the countdown light signaling the drivers to be ready and the bright white light starting the race, so there’s no way for a driver to anticipate when the start light will come on. Getting the holeshot is solely up to you and your opponent’s reaction time, every time. Portable, Rugged, Easy to Operate The Drag Race Start Light is built for convenient and reliable racing. The high-intensity LEDs are easy to see, even in bright daylight. Rubber feet prevent the Start Light from sliding, and the lightweight unit is ruggedly built to withstand mishaps and prevent damage to the race vehicles if they strike it. You can even use the Drag Race Start Light by yourself to practice launching and hone your reaction time. Optional Wireless Remote Available Add the optional wireless remote to allow a race director or flagger to manually control the start of the race for authentic no-prep racing fun. The remote can also be used to start the automatic light sequence conveniently right from the starting line.

379,-

KJØP

RPM 80902 Rear Bumper Mount Black Slash / Rust / Stmpd ...

Mount for Rear Bumper or Wheelie Bar for the Traxxas Slash 2wd, e-Rustler, e-Stampede 2wd & Bandit replaces Traxxas stock #3677 Quick Notes: – fits the Traxxas Slash 2wd, e-Rustler, e-Stampede 2wd & Bandit – replaces Traxxas stock #3677 After hearing numerous requests to look into the rear bumper mount on the Traxxas Slash, we found several issues that could use the RPM touch. Those same problems were encountered on e-Rustler, e-Stampede & Bandit vehicles as well, using the stock wheelie bar mount. The problem – the stock mount uses only a single screw on the gear cover side to hold the mount in place. That causes a hinge effect under rear impacts causing the slotted area holding on to the rear skid plate to pop off after an impact, leaving the stock bumper / wheelie bar mount hanging under the chassis. The RPM solution… An all-new bumper mounting system that eliminates all of the problems encountered with the stock version. The RPM rear bumper / wheelie bar mount has two mounting holes on the gear cover side and three on the motor side – that’s two additional mounting points to eliminate that annoying hinge effect mentioned above. The additional mounting screws help disperse impact energy into the transmission case over more surface area, reducing the possibility of damaging the case significantly! The new RPM mount design means no more slotted parts hanging below the rear skid plate – ever! Our mount tucks up quite nicely behind the skid plate for better rear end ground clearance. Our rear bumper / wheelie bar mount fits a wide range of vehicles too. It fits all versions of the Traxxas Slash 2wd, electric Stampede, electric Rustler and Bandit including VXL, XL-5 and legacy versions. The RPM rear bumper / wheelie bar mount is molded in our nearly indestructible blend of nylons and is sold in either blue or black. Each mount comes with all necessary hardware, complete instructions for ease of installation and an industry-leading warranty to back it all up! Tech Notes: The RPM Rear Bumper Mount replaces Traxxas #3677.

139,-

KJØP

Electric Motor Axle 3.17mm To 5mm Shaft Adapter

39,-

KJØP

Traxxas 1633 E-Clips/C-Clips/R Pins (40)

This is a assortment of e-clips, c-clips, and body clips for the Traxxas line of cars and trucks. INCLUDES: 28 of the 2.5mm E-clips, 2 of the 3mm E-clips, 3 of the 5mm E-clips, 4 of the shock C-clips and 3 body clips.

29,-

39,-

KJØP

-26%

Traxxas 2437 Front Axles Bandit

This is a pair of Front Axles for the Traxxas Bandit Buggy Kit and the Ready To Run version. FEATURES: Constructed of steel. INCLUDES: Two Front Axles for the Traxxas Bandit Buggy Kit and Ready to Run Version with two 0.14"(3.5mm) x 0.26"(7mm) plastic hex nuts. SPECS: Length: 0.94" (24mm) Length of threaded area: 0.14" (3.5mm) Thread size: 0.16" (4mm) REQUIRES: Placing each axle into the Steering Blocks TRX 3636, and installing Stub Axle Pins TRX 2754.

39,-

KJØP

Hovedbilde Proline Tires & Wheels Icon/Raid SC 2.2

Proline Tires & Wheels Icon/Raid SC 2.2"/3.0" ...

PRO-LINE 1/10 Icon M2 Front/Rear 2.2"/3.0" SC Mounted 12mm Black Raid Wheels (2) Pro-Line is proud to introduce a brand-new, ground-up tire design that lives up to the Pro-Line name: The Icon SC tires! This innovative and highly detailed Short Course tire features large P and L letters hidden into the futuristic and aggressive tread that is designed to outlast the competition. The sidewall is also extremely detailed and will look good paired up with any Pro-Line SC body. The Icon SC tire uses the latest in All-Terrain tire tread technology with large, angled tread blocks with strategic cuts in the tread for additional traction. This tire is perfect for your All-Terrain Short Course adventures and performs great on dirt, gravel, grass, and even the street. Since the tread on the Icon tire is so tall and because it is made from Pro-Line's legendary M2 compound, the Icon tire will survive a beating and keep coming back for more! The Icon SC tires are conveniently mounted to a pair of Raid SC Removable Hex Wheels (PL2785-03). We take the guesswork out of your glue job by doing the mounting for you so you can spend your time having fun! Pro-Line is proud to introduce a true next-generation Short Course wheel design - the Raid 2.2"/3.0" Removable Hex Wheel for all Short Course Tires! Imagine being able to easily change the offset of your wheel to fit different applications by simply changing out the hex! Now you can with the new 6x30 Removable Hex system from Pro-Line. The wheels include a pair of 12mm Slash® 4x4 Front/Rear (Slash® 2wd Rear) hexes and a pair of 12mm Slash® 2wd Front hexes that fit the most popular trucks. Optional 14mm, 17mm and ProTrac™ offset 12mm hexes (PL6355-00) are available separately to fit your exact application. If your wheel hex ever gets damaged, it can easily be replaced without needing to replace your glued tires (PL6354-00 Replacement Slash® Hexes)! These Raid SC wheels accomplish all of this and more by using Pro-Line's unique 6x30 interlocking hex design that is secured to the wheel by 6 M3 screws that are spaced 30mm across. The built-in adjustability and ease of use make this a new must-have wheel for Short Course Trucks everywhere! Tire Features: Futuristic and Aggressive Tire Tread Design Perfect All-Terrain Tire That works on Dirt, Gravel, Grass, and the Street Tall Tread Will Outlast the Competition! Large P and L Letters Built into the Tread Extremely Detailed Sidewall Design That Will Look Good on any Truck Long Lasting Closed Cell Foam Inserts Included Made in the USAF Wheel Features: Removable Hexes Allow You to Change Wheel Offsets on the Fly Easily Replace Damaged Hexes or Upgrade to 14mm, 17mm, and 12mm ProTrac™ Offset Hexes (PL6355-00) The 2 Most Common 12mm Offset Hexes (PL6354-00) are Included! Fits any of Pro-Line's 6x30 Removable Wheel Hexes for Tons of Custom Offset Options Wheel Made from High-strength, Durable DuPont Nylon Material Raid 10-spoke Wheel (PL2785-03) Design Mimics Full-size Racing Wheels M3 Wheel Hex Hardware Included Included: (2) Icon SC 2.2"/3.0" F/R Mounted M2 Tires (2) Long Lasting Closed Cell Inserts (2) Raid Black 10-spoke Wheels (2) 12mm Offset Hexes Fits: Slash® 2wd Front or Rear Slash® 4x4 Front or Rear Requires a PL6355-00 to fit 14mm, 17mm and 12mm ProTrac™ Offset SC Trucks Check out optional plastic & aluminum 6x30 hexes (sold separately) to fit other trucks! 12mm (narrow & wide) (PL6335-00) 14mm (PL6347-00) 17mm (PL6336-00) Outer Diameter: 76 mm Scale: 1/10 Size: 2,2/3,0 Inch Suit: Short Course Surface: Grass, Terrain Compound: M2 (Medium) Width: 50 mm

649,-

679,-

KJØP

-4%

Traxxas 9460 Wheelie Bar Drag Slash

Traxxas 9460 Wheelie Bar Drag Slash Wheelie bar, black (assembled)/ wheelie bar mount

329,-

349,-

KJØP

-6%

DynoMAX B9871 - Connector Adapter EC5 (male) - XT90 ...

DynoMAX B9871 - Connector Adapter EC5 (male) - XT90 (female) This is an practical connector adapter for batteries with an EC5 connector where you want to change it to an XT90 connector without soldering etc. It also works if you have an charge lead with an XT90 connector but you have an vehicle with a EC5 connector system.

49,-

KJØP

Dusty Motors 0031 Slash 4x4 HCG Dust Protection Cover

Dusty Motors Dust Protection Cover for Traxxas Slash 4x4 (HCG Chassis) - Black DMC0031 This is a high quality, hand made, dust and water splash proof shroud, designated to fit a particular model. Shroud comes with a zipper, which allows to access the internals of a model i.e. connecting/disconnecting batteries and turning a model on/off without removing a shroud. While taking a break between the running stints the shroud can be unzipped to allow ESC and motor to cool quicker. Shroud is made from the highest quality materials. That is why it is strong, durable and efficient. The open area of a material is more than 50% of total shroud surface, so it ensures a very good airflow in order to keep the model electronics cool. Shock absorber cover is included into the package. Shock absorber cover comes in one long piece, so it could be cut into lengths that particular shock absorbers require. Cover is made from elastic material in order to fit shock absorbers of different diameters. One included length of a cover will be enough for 4-8 shock absorbers, depending on a length of one.

359,-

409,-

KJØP

-12%

Traxxas 6511 Link Bluetooth Wireless Module TQi

This is the Traxxas Link TQi Wireless Module. FEATURES For use with the Traxxas Link app and TQi radio system Compatible with iPhone (4S or later) iPad (3rd gen and later) iPod touch (5th gen and later) iPad mini Allows driver to view real time telemetry with optional sensors (sensors not included) Compatible with Android 4.4 and up or Apple iOS 4.3 and later platforms INCLUDES Traxxas Link TQi Wireless Module 1.5mm Hex Wrench 1.5x5mm Hex Head Screw SPECIFICATIONS Dimensions: 1.2 x 1.8 x 0.42" (31.5 x 46.8 x 10.8mm) Weight: 0.26oz (7.5g)

479,-

529,-

KJØP

-9%

Tamiya 86013 PS-13 Polycarbonate Spray Gold 3 oz

This is Tamiya Color Spray Lacquer for Polycarbonate (PS-13 Gold). For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies used in R/C car modeling. An appropriate amount of paint for finishing one R/C model. This paint is impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies. The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS: Net Volume: 100ml COMMENTS: Never use this paint on plastic models. Highly flammable.

109,-

KJØP

Traxxas 9418 Shock Tower Rear Drag Slash

Informasjon

Produsent

Traxxas

Relaterte produkter

Kunder kjøpte også

SamiRC Norge AS

Om oss

Kundeservice

Totalt:

Kategorier

Nylige søk

Søkeresultater

Traxxas 9418 Shock Tower Rear Drag Slash

Informasjon

Produsent

Traxxas

Relaterte produkter

Kunder kjøpte også

Totalt:

Tamiya El-biler

Kyosho-Biler

Mini-Z

Carson

Tamiya Lastebiler

Reservedeler til Lastebil

Reservedeler til Hengere

E-flite RC

Traxxas & Latrax Reservedeler

Sendere

Spektrum sendere

Spektrum mottakere

Mottakere

Spektrum Mottakere

Telemetri

Hitec

Servoer

Servoer etter størrelse

Reservedeler

Option-parts

Option Parts Biler

Tamiya Biler

Servo anbefalinger til biler

Maverick biler

Traxxas biler

Kyosho biler

Mini-Z biler

Tamiya biler

HPI Biler

Redcat

Servo anbefalinger til båt

Crawler motor & regulator

Børsteløs/Brushless

Børsteløs combo

Børsteløs motor

Børsteløs Bil motor

Børsteløs regulator

Reservedeler til motorer

Flymotorer

OS motorer

Lipo

Lipo 3 celler 11.1 volt

3 celler sortert etter plugg

Lipo 4 celler 14,8 volt

4 celler sortert etter plugg

NiMH

Mottakerbatteri

Batteri etter produsent

LiFe

Traxxas Biler

Traxxas 68086-4 Slash 4x4 VXL

Traxxas Båter

Alle fly

Redcat Biler

Maverick biler

Kyosho biler

Kyosho Mini-Z

HPI biler

Reservedeler etter Produsent

Traxxas El-Biler

Arrma

Traxxas Nitro-Biler

Tamiya El-Biler

TT-01

Axial El-Biler

SCX10 Honcho

Kyosho-El-biler

Mini-Z deler

Kyosho Fazer D2 FZD2

Utgåtte Kyosho biler

Kyosho Nitro Biler

RC4WD-Biler

Vaterra-Biler