Hopp til innhold
Hjem / Reservedeler/Option-parts / Reservedeler Bil / Reservedeler etter Produsent / Traxxas El-Biler / Bandit XL-5 / Traxxas 2437 Front Axles Bandit

Traxxas 2437 Front Axles Bandit

Art.nr: TRX 2437

39,-

Traxxas

Traxxas
På lager: 5

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

This is a pair of Front Axles for the Traxxas Bandit Buggy Kit
                   and the Ready To Run version.


FEATURES: Constructed of steel.


INCLUDES: Two Front Axles for the Traxxas Bandit Buggy Kit and Ready to Run
            Version with two 0.14"(3.5mm) x 0.26"(7mm) plastic hex nuts.


SPECS:    Length:                  0.94" (24mm)
          Length of threaded area: 0.14" (3.5mm)
          Thread size:             0.16" (4mm)


REQUIRES: Placing each axle into the Steering Blocks TRX 3636, and installing
            Stub Axle Pins TRX 2754.

Produsent

Traxxas

Traxxas

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Relaterte produkter

 

Hovedbilde
"Bulk" Traxxas 2437 Front Axles Bandit
Art.nr: BULK TRX 2437
Copied
*** This is a Brand new item taken from a kit (chopped part), therefore will not have a Traxxas packaging *** "Bulk" Traxxas 2437 Front Axles Bandit  This is a pair of Front Axles for the Traxxas Bandit Buggy Kit                    and the Ready To Run version. FEATURES: Constructed of steel. INCLUDES: Two Front Axles for the Traxxas Bandit Buggy Kit and Ready to Run             Version  SPECS:    Length:                  0.94" (24mm)           Length of threaded area: 0.14" (3.5mm)           Thread size:             0.16" (4mm) REQUIRES: Placing each axle into the Steering Blocks TRX 3636, and installing             Stub Axle Pins TRX 2754.

39,-

Ikke på lager

Kunder kjøpte også

Hovedbilde Traxxas 9450 Drive Shafts (2) Drag Slash, Bandit
Traxxas 9450 Drive Shafts (2) Drag Slash, Bandit
Traxxas Drive Shafts (2) Drag Slash, Bandit Driveshaft assembly (1), left or right (fully assembled, ready to install)/ screw pin (1)   Replacement part for these models: Drag Slash Accessory part for these models: Bandit® VXL Bandit® XL5

149,-

159,-

KJØP
-6%
Hovedbilde Traxxas 5891 Tires & Wheels Paddel/ Split-Spoke ...
Traxxas 5891 Tires & Wheels Paddel/ Split-Spoke ...
Tires & wheels, assembled, glued (SCT Split-Spoke satin chrome, beadlock style wheels, paddle tires, foam inserts) (2) (4WD front/rear, 2WD rear only) (TSM rated)   Fits: 1/10 4WD Short Course Trucks Front & Rear 1/10 2WD Short Course Trucks Rear       Scale: 1/10 Size: 3,8 Inch Suit: Short Course Special: Traxxas TSM-Rated

459,-

479,-

KJØP
-4%
Hovedbilde Traxxas 4976 Wheels (4) Axles Maxx Wheelie Bar (2)
Traxxas 4976 Wheels (4) Axles Maxx Wheelie Bar (2)
 These are the Wheelie Bar Wheels for the Traxxas 3.3 T-Maxx. FEATURES: Constructed of hard plastic           Axles constructed of steel INCLUDES: Four wheels and two axles REQUIRES: Installing on wheelie bar SPECS:    Thickness: 0.39" (10mm)           Diameter:  1.02" (26.1mm)

49,-

KJØP
Hovedbilde RPM 80402 Shock Shaft Guard Black Traxxas (4)
RPM 80402 Shock Shaft Guard Black Traxxas (4)
Shock Shaft Guards for Traxxas & Durango 1/10th Scale Shocks Quick Notes: – fits Traxxas 1:10 scale Ultra and “Big Bore” shocks – fits Durango 1:10 scale shocks Description Rocks, dirt and debris striking shock shafts lead to dents, dings and burrs, which in turn, leads to torn shock seals. Torn shock seals means leaky shocks and poor shock performance. RPM Shock Shaft Guards shield the shock shaft from those deteriorating elements, prolonging the life of the shock shaft, which improves the long-term performance of the suspension and in turn, prolongs the time between shock rebuilds! RPM Shock Shaft Guards are a simple design, replacing your stock shock spring cup with one that has a thin but tough shield rising up to the base of the shock body, completely blocking debris from striking the shock shaft. The back and sides are open, which prevents debris from building inside the guard as well. The kit comes with replacement oversized shock rod ends, improving durability and consistency on the shock pivot ball. Additionally, we redesigned the top of the rod end so it is square. That square end keys the shock shaft guard for directional control. The front shield of the guard covers over 100 degrees of frontal exposure! RPM Shock Shaft Guards are zero friction protection devices, meaning the guard never touches the working elements of the shock. RPM Shock Shaft Guards are sold in sets of four, including four rod ends for the shocks and are stock replacement items. Nothing more is needed for installation. Check out this partial list of vehicles they will fit: Slash 2wd, Slash 4×4, Stampede 4×4, nitro and electric versions of the Stampede 2wd and Rustler, Bandit, Nitro Sport, T-Maxx & E-Maxx (see tech notes below), and many more including vintage and legacy models. RPM Shock Shaft Guards are available in Black, Green, Blue and our Dyeable White materials.  Tech Notes: RPM Shock Shaft Guards fit all Traxxas 1/10th scale molded shocks as well as Traxxas Big Bore shocks but will not fit the Traxxas Jato or GTR shocks. They fit the T-Maxx and E-Maxx but will not work with RPM T/E-Maxx A-arms due to clearance limitations on the upper arm.    

129,-

149,-

KJØP
-13%
Hovedbilde Traxxas 5136X Differential Oil Kit Revo
Traxxas 5136X Differential Oil Kit Revo
This is the Diff Oil Kit for the Revo by Traxxas. FEATURES: Three bottles of oil (10K,30K,50K weights). INCLUDES: Three 2oz (59ml) bottles of oil           Three pour spouts

249,-

KJØP
Hovedbilde Traxxas 3677P Wheelie Bar Mount Pink
Traxxas 3677P Wheelie Bar Mount Pink
Information Fits: Traxxas Slash (2WD) Traxxas Slash Dakar / Robby Gordon Traxxas Ford F-150 SVT Raptor Traxxas Bandit Traxxas Bandit VXL Traxxas Rustler Traxxas Rustler VXL Traxxas Stampede (2WD) Traxxas Stampede VXL (2WD) Traxxas Skully Traxxas Craniac Traxxas BIGFOOT  

49,-

KJØP
Hovedbilde Traxxas 2750A Suspension Arms Rear HD Black (2) Drag ...
Traxxas 2750A Suspension Arms Rear HD Black (2) Drag ...
Suspension arms, black, rear (left & right), heavy duty (2)

139,-

KJØP
Hovedbilde Yeah Racing YBS-0034 Steel Bearing Set (19pcs) For ... Hovedbilde Yeah Racing YBS-0034 Steel Bearing Set (19pcs) For ...
Yeah Racing YBS-0034 Steel Bearing Set (19pcs) For ...
Yeah Racing YBS-0034 Steel Bearing Set (19pcs) For Traxxas 1/10 2WD Slash / 2WD Rustler / Bandit / Stampede Description: Replace or upgrade to a fullset of bearings for your car for a smoother and more efficient running car! No more looking up all the sizes you need and potentially getting the wrong ones with these custom sets for specific cars!     Feature:   For : Traxxas 1/10 2wd Slash / Rustler / Bandit / Stampede Material : Steel Shielding: Rubber   Specification:   YB6011B  5mm x 8mm x 2.5mm (4pcs) YB6014B  5mm x 11mm x 4mm (15pcs)   Include:   Total Bearing (19 Pcs)

149,-

169,-

KJØP
-12%
Hovedbilde Traxxas 9495A Pro Series Magnum 272R Transmission ... Hovedbilde Traxxas 9495A Pro Series Magnum 272R Transmission ...
Traxxas 9495A Pro Series Magnum 272R Transmission ...
Traxxas Pro Series Magnum 272R Transmission Upgrade Your 2WD Slash, Rustler, Stampede, or Bandit Developed specifically for the hard-hitting Drag Slash, the Pro Series Magnum 272R upgrades key features of the standard Magnum transmission for maximum durability and next-level performance. A new low-profile design, 3.2 mm motor plate and hardened steel top shaft are just the beginning. The Pro Series Magnum 272R represents a complete performance redesign and now it’s available for your standard or VXL 2WD Bandit, Rustler, Stampede, or Slash. QUICK FEATURES ON PRO SERIES MAGNUM 272R TRANSMISSION (#9495A) Redesigned transmission case Reinforced for added strength and rigidity Low-CG design for improved handling Ultra-rigid wheelie bar mount 3.2 mm Aluminum Motor Plate Increases structural rigidity Improves heat dissipation Compatible with fixed gear mesh system Hardened-steel top shaft Press-fit top gear for superior strength and durability Sealed differential Hardened-steel beveled gears Tunable with silicone differential oil Easy access differential Simple removal for tuning and maintenance   Pro Series Magnum 272R™ Transmission Upgrade Your Bandit, Rustler, Stampede, or Slash with the Toughest Transmission Available A New Generation of Performance Developed specifically for the hard-hitting Drag Slash, the Pro Series Magnum 272R upgrades key features of the standard Magnum transmission for maximum durability and next-level performance. A new low-profile design, 3.2 mm motor plate and hardened steel top shaft are just the beginning. The Pro Series Magnum 272R represents a complete performance redesign and now it’s available for your standard or VXL 2WD Bandit, Rustler, Stampede, or Slash. ­ QUICK FEATURES ON PRO SERIES MAGNUM 272R TRANSMISSION (#9495A) ­ Redesigned transmission case Reinforced for added strength and rigidity Low-CG design for improved handling Ultra-rigid wheelie bar mount 3.2 mm Aluminum Motor Plate Increases structural rigidity Improves heat dissipation Compatible with fixed gear mesh system Hardened-steel top shaft Press-fit top gear for superior strength and durability Sealed differential Hardened-steel beveled gears Tunable with silicone differential oil Easy access differential Simple removal for tuning and maintenance ­ ­   In-Depth Features     Precision Transmission Case The Pro Series Magnum 272R transmission is engineered for strength with its rugged, reinforced case. The case halves engage precisely to seal out dirt and debris, and create a rigid structure to support the motor, suspension arms, and optional wheelie bar. The thick T-6 aluminum motor plate resists flex and acts as a heatsink. All-Metal Internal Gears This race-ready transmission is built for massive torque with high-strength steel input, idler, and differential gears and large-diameter bearings. The input gear is keyed and press fit onto the top shaft for greater precision and strength than a pin-mounted gear.       Sealed Beveled-Gear Differential The heavy-duty steel-gear differential is X-ring and gasket-sealed and filled with grease for all-around performance. It's easy to tune the differential's locking action by adding different viscosity silicone oil to suit surface traction.   Removable Differential The Magnum 272R's easily removable differential makes maintenance and tuning easier than ever. Disconnect the driveshafts and open the hatch to release the differential in just minutes.         MODEL 9495A: Pro Series Magnum 272R™ Transmission   Accessory part for these models: Bandit® VXL Bandit® BIGFOOT® No. 1 Officially Licensed Replica Drag Slash Ford® F-150 Raptor Rustler® VXL Rustler® Slash 2WD Unassembled Kit Slash VXL Slash Stampede® VXL Stampede®

1.099,-

1.299,-

KJØP
-15%
Hovedbilde Traxxas 6468 Tire Glue TRX Ultra Premium Hovedbilde Traxxas 6468 Tire Glue TRX Ultra Premium
Traxxas 6468 Tire Glue TRX Ultra Premium
  Traxxas Ultra Premium Tire Glue Ultra Premium Tire Glue (#6468) with packageOnly one tire glue is certified for use with the 100+mph XO-1: Traxxas Ultra Premium Tire Glue. The XO-1 relies on a high-strength tire bond to withstand incredible centrifugal forces at speeds in excess of 100mph. No other glue endures such high loads, which makes Traxxas Ultra Premium Tire Glue the ultimate adhesive for any tire and rim combination (and any other application that requires a high-strength bond).  To preserve the maximum bonding power of Traxxas Ultra Premium Tire Glue, its bottle is specially designed to maintain a tight seal and prevent clogging. The bottle and nozzle are made of glue-resistant material, and a pin integrated into the tightly-fitting screw-on cap assures glue won't clog the bottle tip. The tip's fine opening allows precise glue application every time you reach for Traxxas Ultra Premium Tire Glue. Traxxas Ultra Premium Tire Glue is custom-blended exclusively for Traxxas. There simply is no better bond for high-speed, high-power vehicles. Traxxas Ultra Premium Tire Glue Features:   The only glue Traxxas Certified for the 100+mph XO-1 Highest-quality cyanoacrylate (CA) glue available Fine tip opening for precise glue application Tightly-fitting cap with sealing pin Glue-resistant bottle and tip material Includes two precision application tips Content 20gr    

139,-

159,-

KJØP
-13%
Hovedbilde Traxxas 5722 Battery Straps Spartan (4)
Traxxas 5722 Battery Straps Spartan (4)
These are the Battery Straps for the Spartan Boat from Traxxas FEATURES Black color velcro strap INCLUDES 4 battery straps SPECIFICATIONS Length: 9" (228mm) Width: .62" (16mm)

79,-

KJØP
Hovedbilde Tamiya 87099 Cera-Grease HG
Tamiya 87099 Cera-Grease HG
This is the Cera-Grease HG from Tamiya.     FEATURES High-performance grease which can reduce friction loss by 50%  Consists of extremely fine boron nitride particles  For use on plastic and metal parts   INCLUDES One Tube of Cera-Grease HG   REQUIREMENTS Apply to gears, axles, and joints to increase efficiency   SPECIFICATIONS  NET: 10g (0.35oz)   COMMENTS Do not apply to switches

85,-

KJØP
Hovedbilde RPM 80382 Rear Bearing Carriers Rustler/Stampede/Slash ... Hovedbilde RPM 80382 Rear Bearing Carriers Rustler/Stampede/Slash ...
RPM 80382 Rear Bearing Carriers Rustler/Stampede/Slash ...
RPM Rear Bearing Carriers for 2WD Slash, Nitro Slash, Stampede, Rustler & Bandit - Black Replaces stock Traxxas #3752 Quick Notes: Fits the Traxxas 2WD Slash, Rustler, Stampede & Bandit Replaces stock Traxxas #3752 5x11x4mm. bearings not included Not for use on 4×4 versions of the Rustler, Stampede or Slash Identical in strength and performance as our Front Bearing Carriers, these rear carriers will get you to the finish line every time! Our bearing carriers are molded from RPM’s bulletproof blend of nylons and are guaranteed not break! Molded in black or blue. Tech Notes: First generation vehicles (vehicles made prior to 2010) that come with 5x8mm bushings will need to purchase replacement 5x11x4mm bearings (not included). Later moels use a 5x11x4mm bearing as a stock size and can be directly transferred to RPM versions. 5x11x4mm bearings are not included with these kits (4 bearings are required for each kit).

129,-

139,-

KJØP
-7%
Hovedbilde Traxxas 2470G Tires & Wheels Alias Medium / Grey Satin ...
Traxxas 2470G Tires & Wheels Alias Medium / Grey Satin ...
Tires & Wheels Alias Medium / Grey Satin w. Chrome Ring 2.2" Rear (2) Tires & wheels, assembled (2.2" black, satin chrome beadlock wheels, Alias® 2.2" tires) (2) (Bandit® rear, medium compound with foam inserts) Alias® step-pin medium-compound tires provide excellent traction in dirt and other loose surfaces. Tires come pre-glued and mounted to 2.2" graphite gray multi-spoke rear wheels with foam inserts.

339,-

KJØP
Hovedbilde Traxxas 9418 Shock Tower Rear Drag Slash
Traxxas 9418 Shock Tower Rear Drag Slash
Traxxas Shock Tower Rear Drag Slash  

59,-

KJØP
Hovedbilde Electric Motor Axle 3.17mm To 5mm Shaft Adapter
Electric Motor Axle 3.17mm To 5mm Shaft Adapter
Electric Motor Axle 3.17mm To 5mm Shaft Adapter 

39,-

KJØP
Hovedbilde Traxxas 3352R Rebuild Kit Velineon 3500
Traxxas 3352R Rebuild Kit Velineon 3500
This is the Rebuild Kit for the Traxxas Velineon                         3500 Brushless motor - TRX 3351  FEATURES: Improves performance of an old motor           Step-by-step instruction sheet guides you through the process INCLUDES: Two 5 x 11 x 4mm Bearings           One 5 x 7 x 13mm Brass Bushing           One 5 x 7 x 5.6mm Brass Bushing           Four 2.5 x 5mm Button Head Screws (1.5mm hex size) REQUIRES: Removal of old parts and installation of new parts following the            included instruction sheet COMMENTS: For the replacement motor rotor order TRX 3353                               For the replacement motor cover endbell order TRX 3354   020334335203

149,-

KJØP
Hovedbilde Traxxas 6834 Suspension Pin Set Slash 4x4
Traxxas 6834 Suspension Pin Set Slash 4x4
This is the Suspension Pin Set for the Traxxas Slash 4X4.            The hinge pins hold the suspension arms to the bulkheads FEATURES: Durable steel construction           Silver in color INCLUDES: Four 51.5mm pins           Four 30mm pins REQUIRES: Installation on the Slash 4x4  

55,-

KJØP
Hovedbilde Traxxas 6829 Bulkhead Rear Slash 4x4
Traxxas 6829 Bulkhead Rear Slash 4x4
This is the Rear Bulkhead for the Traxxas Slash 4x4. FEATURES: Hardened plastic construction           Black in color INCLUDES: One rear bulkhead REQUIRES: Installation on Slash

75,-

KJØP
Hovedbilde Traxxas 6757 Rebuild Kit XO-1
Traxxas 6757 Rebuild Kit XO-1
Rebuild kit, steel-splined constant-velocity driveshafts (includes pins, dustboots, lube, and hardware) Rebuild your Traxxas steel CV driveshafts with this kit. Each kit contains the pins, dust boots, grease, and hardware to rebuild two driveshafts. Fits 1951R, 6851R, 6852R, 6451, 6452, and 9450R.  

219,-

239,-

KJØP
-8%
Hovedbilde Traxxas 6754 Stub Axle Front 1/10 Rally VXL
Traxxas 6754 Stub Axle Front 1/10 Rally VXL
This is the Stub Axle, Front, Steel-splined Constant Velocity  For the Traxxas 1/10 Rally VXL   FEATURES Made of steel   INCLUDES One stub axle   SPECIFICATIONS  Length: 36.5mm (23/16")  Diameter: 11.7mm (15/32")  Threaded part of shaft, length: 9.4mm (3/8")  diameter: 3.9mm (5/32")

89,-

KJØP
Hovedbilde Traxxas 7477 Cover Gear/Wire Retainer 1/10 Rally VXL
Traxxas 7477 Cover Gear/Wire Retainer 1/10 Rally VXL
This is the Cover Gear/Wire Retainer                       For the Traxxas 1/10 Rally VXL FEATURES: Made of black plastic. INCLUDES: One cover gear           One wire retainer

39,-

KJØP
Hovedbilde Traxxas 2630 Suspension arm bracket for TRX-3 ...
Traxxas 2630 Suspension arm bracket for TRX-3 ...
Dette er en Suspension Arm Bracket til den gamle TRX-3. TRX-3 regnes a mange nå som en vintage bil, og deler til den er veldig vanskelige å få tak i. OBS! Delen er svart, og ikke hvit slik som vist på bildet.

55,-

KJØP
Hovedbilde Traxxas 2546 Countersunk Machine Hex Drive Screws ...
Traxxas 2546 Countersunk Machine Hex Drive Screws ...
This is the Traxxas Countersunk 4 x 15mm Screws. FEATURES Metal construction Black in color INCLUDES Six 4 x 15mm countersunk flathead hex screws REQUIREMENTS Installation on the vehicle

35,-

KJØP
Hovedbilde Traxxas 1664 Shock Shafts Long LSII
Traxxas 1664 Shock Shafts Long LSII
This is the replacement front shock shafts for the Traxxas LSII. Includes: 2- front shock shafts.

39,-

KJØP

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png