Hopp til innhold

Traxxas 1664T Shock Shafts Long Nitro Rustler (2)

Art.nr: TRX 1664T

119,-

Traxxas

Traxxas

** Ikke på lager

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

There are the Long Shock Shafts for the Traxxas Nitro Rustler.

FEATURES: Hardened steel and titanium nitride coated (Brass color)

INCLUDES: Two shafts

REQUIRES: Installation in shock

SPECS:    Diameter: 3mm (0.118")
          Length: 47 mm (1.85")
          Thread: 3mm (0.118")

COMMENTS: Uses 3mm e-clips

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

      This is a Tube of White Lithium Grease from Traxxas.         This product can be used to lubricate parts, such as gears. FEATURES: Great lubrication for nylon gears INCLUDES: One tube of lithium grease (volume unknown) REQUIRES: Application to parts needing lubrication.  

39,-

KJØP
Traxxas 7462-RED Shocks, GTR xx-long red-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) (2)

459,-

499,-

KJØP
-8%
Traxxas 10151 Bumper, front/ bumper mount, front/ light covers (left & right)/ 2.5x10mm BCS (4) (fits Ford Raptor R) Raptor R™ replica front bumper with bumper support and light covers. Includes 2.5x10 mm screws (4). Replacement part for these models: Ford® F-150® Raptor R™ 4X4

239,-

KJØP
Spring, shock, 139mm (natural finish) (GTR) (progressive, 1.146 rate, green stripe) (2)

109,-

KJØP
  This is the set of Traxxas Extra Extra Long GTR Shock Springs                     with 0.762 Green Compression Rate. FEATURES: Steel construction, white in color           Dab of paint on end of spring indicates compression rate INCLUDES: Two Extra Extra Long 0.762 Green Rate GTR Shock Springs SPECS:    Length: 2.4" (60mm)           Wire Diameter: 0.043" (1.1mm)

59,-

KJØP
This is a set of XXL shock shafts for the Traxxas shocks. Includes: Two shock shafts Features: hardened chrome/steel construction Specs: 2 1/8" long or 54mm          1/16" diameter or 1.5mm Requires: Extra long shocks Comments: These are threaded on one end, and have the slots for e-clips on the           other.

39,-

KJØP
This is a replacement antenna tube. Antenna tubes are used to help secure and protect reciever antenna wires. INCLUDES: 1 blue antenna tube and 1 black antenna tube cap. SPECIFICATIONS: Length: 11"                 Outside Diameter: 1/8"

29,-

KJØP
These are the optional RPM Wide Front A-Arms  for the Traxxas Electric Rustler and 2WD Stampede.     FEATURES Composite nylon construction  Widens front wheel stance by almost 1-1/4" (31.8mm) for greater  stability  Wide front A-arms extend the front width by exactly the difference  in offset between the front and rear wheels   INCLUDES Left and Right Wide Front A-Arms with Instruction Sheet   REQUIREMENTS Longer turnbuckle and camber links;  Rustler XL-5: RPM Screw Kit   Traxxas Long Camber Links   Traxxas Long Toe Links  Stampede XL-5: RPM Screw Kit   Traxxas Long Camber Links   Traxxas Long Toe Links   Rustler VXL: RPM Screw Kit   Traxxas Long Camber Links   Traxxas Long Toe Links   Stampede VXL: Traxxas Long Toe Links One pair of front wheels, used to replace rear wheels, for proper  alignment

199,-

KJØP
These are REAR nylon rims for the Traxxas electric Rustler, electric Stampede, and any other Traxxas vehicles which use a hex-style drive washer.  These will NOT work on the Nitro Rustler or Nitro Stampede--use TRX 1972 on those. * Includes: (2) white  nylon rear rims (aka wheels) * Features: dyeable white nylon construction           8-hole design           hex-drive hub system (drive hubs not included- TRX 1654) * Specs: 2.2" diameter        1.9" width * Comments: The front set of rims is TRX 3675. The only difference between these           two rims is the internal offset is greater on the rears.

55,-

KJØP
These are the Traxxas 49mm Turnbuckle Camber Links                 for the Bandit, Rustler VXL and Stampede VXL. FEATURES: Metal and Nylon Construction           Silver and Black in Color           Assembled w/Rod Ends INCLUDES: Two rear 49mm (82mm center to center) turnbuckles REQUIRES: Installation on the vehicle

89,-

Ikke på lager
12 mm hex. These are FRONT nylon rims for the Traxxas electric Rustler, electric Stampede, and any other Traxxas vehicles which use a hex-style drive washer.  These will NOT work on the Nitro Rustler or Nitro Stampede--use TRX 1974 on those. * Includes: (2) white  nylon front rims (aka wheels) * Features: dyeable white nylon construction           8-hole design           hex-drive hub system (drive hubs not included- TRX 1654) * Specs: 2.2" diameter        1.9" width * Comments: The rear  set of rims is TRX 3674. The only difference between these           two rims is the internal offset is greater on the rears.

55,-

KJØP
These are Replacement Washers from Traxxas. FEATURES: Black teflon construction.           Used on the axles and in the transmission. INCLUDES: (20) Washers SPECS:    Size:      5x8mm           Thickness: 0.5mm

29,-

KJØP
RPM Rear Shock Tower for Slash 2WD, Stampede 2WD & Rustler 2WD Replaces stock Traxxas #3638 Quick Notes: Replaces stock Traxxas #3638 Fits Traxxas Slash 2WD, Stampede 2WD & Rustler 2WD Also fits the Bandit but see the “Tech Notes” below for important information Optional Front Shock Tower is also available RPM rear shock towers for the electric versions of the Slash, Stampede, Rustler & Bandit were designed with one thing in mind – rugged durability. Once again, we’ve exceeded our own expectations with this shock tower. While we’ve maintained all stock geometry on these shock towers, we’ve beefed them up in all the right places to eliminate annoying rear shock tower breakage. Our version of this shock tower uses an I-Beam construction that improves durability and rigidity as well. At the base of the shock tower, we’ve improved the screws’ head clearance of the bulkhead mounting screws to eliminate the bind normally associated with the stock rear shock tower. All these design elements combine to create the ultimate lightweight, bulletproof rear shock tower for the electric versions of the Slash, Rustler & Stampede. RPM rear shock towers for the Traxxas Slash, Electric Stampede, Electric Rustler & Bandit are molded in black and are backed by our famous breakage warranty. These towers are direct replacement parts for ease of installation. Tech Notes: These rear shock towers can be used on the Traxxas Bandit. However, there are no provisions for a rear wing built in.

99,-

Ikke på lager
  These are the Traxxas Pro-Trax 2.2 Rear Tires with Inserts. FEATURES: Spiked tread design, soft compound rubber construction INCLUDES: Two Traxxas Pro-Trax 2.2 Rear Tires with Foam Inserts REQUIRES: 2.2 rear buggy wheels SPECS:    Width: 2.2" (56mm)           Inner Diameter: 2.1" (53mm)           Outer Diameter: 3.7" (95mm)

219,-

Ikke på lager
Designed for 190mm wide touring cars, this is the Protoform Mazda Speed 6 Sedan body. FEATURES:           Conforms to all ROAR, EFRA, FEMCA, FAMAR and IFMAR specs           Two lower trims lines. One of the lower lines is for the slightly            taller requirements of BRCA rules           Clear .030" Lexan construction with paint-then-peel overspray film           Clear .030" Lexan wing with mounting hardware           Decal sheet with headlight and tail light decals           Window mask INCLUDES:           One Clear Mazda Speed 6 Body with Overspray Film           One Decal Sheet           One Window Mask Sheet           Two 4-40x1/4" Button Head Screws (1/16" hex size) for wing mounting           Two 4-40 Nylon Nuts for wing mounting REQUIRES:           Body Scissors - and Reamer - and paint of modeler's choice SPECS:              Length: 19.75" (502mm)           Width:  7.5"   (190mm)           Height: 4.5" (115mm)       (B6)

359,-

KJØP
Denne erstatter TRX 1914X   This is the Front and Rear Body Mounts for the Traxxas Slash 2wd. And Traxxas Body Mount Front/Rear Monster Jam FEATURES: Nylon construction           Black in color INCLUDES: One front body mount           One rear body mount           Two 38mm body posts           Two 26mm body posts           Installation hardware REQUIRES: Installation on the Traxxas Slash

75,-

KJØP
These are the Traxxas 61mm Turnbuckle Toe Links  for the Traxxas Stampede.     FEATURES Metal and Nylon Construction  Silver and Black in Color  Assembled w/Rod Ends   INCLUDES Two 61mm (96mm center to center) turnbuckles   REQUIREMENTS Installation on the vehicle

99,-

KJØP
These are steel gearbox joint shafts which replace the kit standard plastic parts for increased performance and durability. They must be used in conjunction with item 53792 RC Universal Shaft Assembly set. Compatible with the TT-02 chassis when item 53792 RC Universal Shaft Assembly is used. Gearbox joints x2

119,-

KJØP
Tamiya 54640 TT-02 Carbon Rear Damper Stay Description: This is Tamiya TT-02 Carbon Rear Damper Stay. Carbon fiber parts contribute to the increased rigidity of your RC model.   Feature:   For: Tamiya TT-02, TT-02D, TT-02T and TT-02R chassis Material: Carbon Color: Black Carbon fiber damper stay features a number of attachment positions to allow alteration to the shock angle Contains small parts for damper attachment, such as collars, screws, ball connector nuts and spacers. Use spacers to adjust damper attachment height and model ground clearance Note: these stays cannot be used on TT-02 Type-S and TT-02B chassis   Include:   Tamiya TT-02 Carbon Rear Damper Stay (1 Set)

269,-

299,-

KJØP
-10%
Tamiya 53113 RACING R/S INNER SPONGE This inner sponge set provides an even contact of the tire surface to the ground and extra high grip. Effect Of Inner Spronge   Feature:   For: 50419/50454/50476/53214/53220/53224/53227/53293/53294 Material: Sponge Color: Gray Qty: 4Pcs Without sponge, the tire may deform uner excessive pressure. Inner sponge minimizes deformation to maintain positive grip.

49,-

59,-

KJØP
-17%
True oil filled gear differential for Tamiya's TT02 and TT01! Design based on 1/10 competition touring car differentials to ensure smoother operation and oil sealed operation! Comes with driveshaft blade protectors to protect driveshafts and differential outdrive!    Note: For the small sized ball joint universals.   Features: For: Tamiya TT01 TT02  Material: Plastic/Steel Outdrives Color: Black   Includes: Gear Differential (1 pc) Pins (4 pcs) Bevel Gear (1 pc)

319,-

349,-

KJØP
-9%
Aluminum steering rack takes away most of the slop found in the original part, features bearings allowing for smooth and direct steering input!   Feature:   For: Tamiya M08 Material: Aluminum Color: Black   Include:   Aluminum 7075 Ball Bearing Steering Set (1 pc)

329,-

349,-

KJØP
-6%
This is the Screw Kit for the Rustler and Stampede 2WD  Wide Front A-Arms from RPM.     FEATURES Use with XL-5 versions  Easy and inexpensive option for bolting camber links (not  included) and tie rods (not included) to your electric Rustler  XL-5 or electric Stampede 2wd XL-5 when installing RPM Wide Front  A-arm kits   INCLUDES 4 M3 x 14mm button-head screws  4 M3 x 16mm button-head screws  2 M3 locknuts

39,-

KJØP
Compared to a standard axle/dog bone drive shaft, a universal shaft reduces power loss caused by friction during steering. Compatible chassis: TT-01, TT-02 and TA04 Must use item 54477 when using this part with the TT-02 chassis

379,-

449,-

KJØP
-16%
Tires & wheels, assembled, glued (2.8") (RXT black wheels, Talon EXT tires, foam inserts) (2WD electric rear) (2) (TSM® rated) High-performance all-terrain Talon EXT tires dig into dirt and grass for outstanding traction. The EXT’s tire compound provides extra durability on pavement with a unique design that resists “ballooning” at high speeds. Talon EXT tires come mounted and pre-glued on tough RXT black wheels for no-hassle, out-of-the-box bolt-on traction. TSM®-rated for high-speed applications. Fits 12 mm hex, 2WD electric rear.

349,-

379,-

KJØP
-8%
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png