Hopp til innhold
Hjem / Reservedeler/Option-parts / Option Parts Biler / Traxxas El-Biler / Slash 4x4 VXL / RPM 80702 Front or Rear A-arms for the Traxxas Slash 4×4, Stampe

RPM 80702 Front or Rear A-arms for the Traxxas Slash 4×4, Stampe

Art.nr: 80702

159,-

RPM

RPM
** Ikke på lager

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Front or Rear A-arms for the Traxxas Slash 4×4, Stampede 4×4, Rustler 4×4, Hoss 4×4 & Rally Replaces TRX 3655R & 3655X

Quick Notes:

  • Fits the 1/10 versions of the Slash 4×4, Stampede 4×4, Hoss 4×4 & Rally 4×4
  • Does not fit the Rally ST (please see RPM #73362)
  • Each a-arm is 6.5 grams lighter than stock*!
  • 2 packages is needed to complete one full vehicle (front & rear)
  • Replaces stock Traxxas #3655R & #3655X


RPM A-arms for the Traxxas Slash 4×4, Rustler 4×4, Hoss 4×4 & Stampede 4×4 are everything you’ve come to expect from RPM and more! Take a look at everything we’ve done:

We eliminated the slop in the suspension system, tightening the tolerances around the hinge pins, reduced the fore and aft movement of the A-arms at both the inner hinge pin and at the axle carriers by better than 90% and improved the durability dramatically (they’re made by RPM, enough said). As a bonus, we cut 6.5 grams of weight off of each A-arm*! That’s a total loss of just under one ounce of weight simply by replacing your stock A-arms with the RPM versions!

We can’t forget about how much better aesthetically the RPM versions look either. RPM A-arms carry over our traditional look with our 30 degree leading and trailing edges, and huge bosses for the shocks and sway bar mounts. Additionally, you now have the option of a bit of color with black, blue, green and red to choose from.

RPM A-arms are molded in our trademark blend of incredibly durable nylons and are backed by an industry leading warranty. We proudly stand behind our products! Designed, manufactured and produced right here in southern California in the USA!

Tech Notes: Replaces stock Traxxas #3655R & #3655X. RPM A-arms will not fit ST versions of the Rally (please see RPM #73362). RPM arms are sold in sets of 1 – left and 1 – right A-arm in each package. Two packages will be needed to complete one truck. The upper hinge pin hole of the rear axle carriers cannot be used (not a stock location for the Slash 4×4) due to strengthening designs that reduce the clearance around the rear axle.

*Weight comparison based on Traxxas #3655X.

Produsent

RPM

RPM

Relaterte produkter

 

Hovedbilde RPM 80705 Front or Rear A-arms for the Traxxas Slash ...
RPM 80705 Front or Rear A-arms for the Traxxas Slash ...
Art.nr: 80705
Copied
RPM Front or Rear A-arms for the Traxxas Slash 4×4, Stampede 4×4, Rustler 4×4, Hoss 4×4 & Rally Replaces TRX 3655R & 3655X Quick Notes: Fits the 1/10 versions of the Slash 4×4, Stampede 4×4, Hoss 4×4 & Rally 4×4 Does not fit the Rally ST (please see RPM #73362) Each a-arm is 6.5 grams lighter than stock*! 2 packages is needed to complete one full vehicle (front & rear) Replaces stock Traxxas #3655R & #3655X RPM A-arms for the Traxxas Slash 4×4, Rustler 4×4, Hoss 4×4 & Stampede 4×4 are everything you’ve come to expect from RPM and more! Take a look at everything we’ve done: We eliminated the slop in the suspension system, tightening the tolerances around the hinge pins, reduced the fore and aft movement of the A-arms at both the inner hinge pin and at the axle carriers by better than 90% and improved the durability dramatically (they’re made by RPM, enough said). As a bonus, we cut 6.5 grams of weight off of each A-arm*! That’s a total loss of just under one ounce of weight simply by replacing your stock A-arms with the RPM versions! We can’t forget about how much better aesthetically the RPM versions look either. RPM A-arms carry over our traditional look with our 30 degree leading and trailing edges, and huge bosses for the shocks and sway bar mounts. Additionally, you now have the option of a bit of color with black, blue, green and red to choose from. RPM A-arms are molded in our trademark blend of incredibly durable nylons and are backed by an industry leading warranty. We proudly stand behind our products! Designed, manufactured and produced right here in southern California in the USA! Tech Notes: Replaces stock Traxxas #3655R & #3655X. RPM A-arms will not fit ST versions of the Rally (please see RPM #73362). RPM arms are sold in sets of 1 – left and 1 – right A-arm in each package. Two packages will be needed to complete one truck. The upper hinge pin hole of the rear axle carriers cannot be used (not a stock location for the Slash 4×4) due to strengthening designs that reduce the clearance around the rear axle.  

159,-

Ikke på lager
Hovedbilde RPM 80709 Front or Rear A-arms for Slash 4×4, Stampede ...
RPM 80709 Front or Rear A-arms for Slash 4×4, Stampede ...
Art.nr: 80709
Copied
RPM Front or Rear A-arms for Slash 4×4, Stampede 4×4, Rustler 4×4 & Hoss 4×4 - Red Replaces stock Traxxas #3655R & #3655X Quick Notes: Fits the 1/10 versions of the Slash 4×4, Stampede 4×4, Hoss 4×4 & Rally 4×4 Does not fit the Rally ST (please see RPM #73362) Each a-arm is 6.5 grams lighter than stock*! 2 packages is needed to complete one full vehicle (front & rear) Replaces stock Traxxas #3655R & #3655X RPM A-arms for the Traxxas Slash 4×4, Rustler 4×4, Hoss 4×4 & Stampede 4×4 are everything you’ve come to expect from RPM and more! Take a look at everything we’ve done: We eliminated the slop in the suspension system, tightening the tolerances around the hinge pins, reduced the fore and aft movement of the A-arms at both the inner hinge pin and at the axle carriers by better than 90% and improved the durability dramatically (they’re made by RPM, enough said). As a bonus, we cut 6.5 grams of weight off of each A-arm*! That’s a total loss of just under one ounce of weight simply by replacing your stock A-arms with the RPM versions! We can’t forget about how much better aesthetically the RPM versions look either. RPM A-arms carry over our traditional look with our 30 degree leading and trailing edges, and huge bosses for the shocks and sway bar mounts. Additionally, you now have the option of a bit of color with black, blue, green and red to choose from. RPM A-arms are molded in our trademark blend of incredibly durable nylons and are backed by an industry leading warranty. We proudly stand behind our products! Designed, manufactured and produced right here in southern California in the USA! Tech Notes: Replaces stock Traxxas #3655R & #3655X. RPM A-arms will not fit ST versions of the Rally (please see RPM #73362). RPM arms are sold in sets of 1 – left and 1 – right A-arm in each package. Two packages will be needed to complete one truck. The upper hinge pin hole of the rear axle carriers cannot be used (not a stock location for the Slash 4×4) due to strengthening designs that reduce the clearance around the rear axle.  

159,-

KJØP
Hovedbilde Traxxas 3655R Suspension arms, front/rear
Traxxas 3655R Suspension arms, front/rear
Art.nr: TRX 3655R
Copied
Utgått! Erstattet med TRX 3655-BLK Suspension arms, front/rear (left & right) (2) (heavy duty, cold weather material)

Hovedbilde Traxxas 3655X Suspension Arms Left & Right Slash 4x4
Traxxas 3655X Suspension Arms Left & Right Slash 4x4
Art.nr: TRX 3655X
Copied
This is the Left and Right Suspension Arms for the Traxxas Slash 4x4. FEATURES: Hardened plastic construction           Front or rear application INCLUDES: One left suspension arm           One right suspension arm REQUIRES: Installation on suspension assembly SPECS:    Length: 100mm (3.94")           Width: 45mm (1.77")           Thickness: 11.5mm (0.45") TRX 3655X

129,-

139,-

KJØP
-7%
Hovedbilde RPM 73362 Front or Rear A-arms for the Traxxas Rally ...
RPM 73362 Front or Rear A-arms for the Traxxas Rally ...
Art.nr: 73362
Copied
Suspension Arms F/R (Pair) Telluride, Ford Fiesta Rally ST Quick Notes: – fits the Telluride & ST versions of the Rally – Does not fit the Slash 4×4, Stampede 4×4, Rustler 4×4 or Rally 4×4 – each a-arm is 1.5 grams lighter than stock – 2 packages needed to complete one full vehicle (front & rear) – replaces stock Traxxas #6731 Description RPM customers have been asking for a more durable option for Rally ST & Telluride A-arms. What we came up with is a blending of design between our extremely popular Slash 4×4 A-arms and an all new design specifically for the Rally ST & Telluride. As for improvements, we eliminated the slop in the suspension system, tightened the tolerances around the hinge pins, reduced the fore and aft movement of the A-arm at both the inner hinge pin and at the axle carriers and improved the durability dramatically. As a bonus, our A-arms are lighter than stock as well (1.5g ea. or 6 grams for a full set of four). We can’t forget about how much more aesthetically appealing the RPM versions look either. RPM A-arms carry over our traditional A-arm design with our 30° leading and trailing edges and huge bosses for the shock and sway bar mounts. Tech Notes:  RPM A-arms for the Traxxas Rally ST / Telluride are sold in sets of 1 left and 1 right A-arm in each package. Two packages will be needed to complete one vehicle. RPM A-arms replace stock Traxxas #6731. RPM Rally ST A-arms are not compatible with older model Rally vehicles, Slash 4×4, Stampede 4×4 or the Rustler 4×4. For these vehicles, please see RPM #80702.

159,-

KJØP

Kunder kjøpte også

Hovedbilde RPM 81122 Adjustable Front Body Mounts – 2WD Slash, ...
RPM 81122 Adjustable Front Body Mounts – 2WD Slash, ...
RPM Adjustable Front Body Mounts – 2WD Slash, Nitro Slash, Rustler & Nitro Rustler Replaces Traxxas #1914X. Also replaces Traxxas #1914R but does not contain provisions for long posts. Quick Notes: Replaces Traxxas #1914X. Also replaces Traxxas #1914R but does not contain provisions for long posts. Does not work with Traxxas #5803 -MacCachren Edition Slash 2WD VXL (or #6833 MacCachren body only) Adjustable Rear Body Mount is also available Front Shock Tower is also available Immediately after releasing our Adjustable Body Mounts for the Traxxas Slash 4×4 (#73932), RPM customers with the 2wd version of the Slash wanted adjustable, more durable body posts too. RPM Adjustable Body posts for the Traxxas Slash 2wd are here and are designed for durability and strength while still allowing you to change the body height on the truck. Our unique body post mounting system allows the option of using the stock body height on the chassis. The body can also be lowered as much as 3/16” or raised as much as 3/8” simply by moving the posts up or down on the mounts. This simple, yet clever design is strong enough to handle the toughest of conditions while still allowing enough flex to absorb impacts that could otherwise damage other more fragile internal components of the chassis. Everything about our body mounts and posts are beefier than stock – from the thicker than stock screw mounts to the twin screws holding the body posts on to the mounts. We also use an I-beam shape throughout each mount, which provides the strength these parts need for those less than perfect landings. Tech Notes: These body mounts and posts are fully height adjustable on the Traxxas Slash 2wd. For vehicles listed above other than the Slash 2wd, each part number may be used although adjustability may be limited based on the vehicle.

109,-

KJØP
Hovedbilde Traxxas 6811 Clear Body Slash 4X4/Slayer
Traxxas 6811 Clear Body Slash 4X4/Slayer
This is the Short Course Racing Truck Clear Body for the Traxxas 4x4 Slash and Slayer. FEATURES: Trimmed and ready to paint Clear protective coating on outside of body INCLUDES: Clear Short Course Racing Truck Body with Window Masks, Sponsor and Body Trim Decals REQUIRES: Spray or brush-on polycarbonate safe paint SPECS:    Length: 21.25" (540mm) Width:  11.5"  (292mm) Height:  5.5"  (140mm)    

459,-

499,-

Ikke på lager
-8%
Hovedbilde Traxxas 3617 Body Stampede w/Decal Sheet
Traxxas 3617 Body Stampede w/Decal Sheet
This is the Body for the Stampede from Traxxas. FEATURES: Clear lexan construction Pre-trimmed INCLUDES: One clear body One decal sheet with window, grill and lights decals REQUIRES: Body Mounts, TRX 3614 Polycarbonate Paint SPECS:    Length: 16.5" (419.1mm) Width: 6.25" (158.75mm) at rear wheels (widest point) Width: 6" (152.4mm) behind front wheels (narrowest point) Height: 4.5" (114.3mm) COMMENTS: Body has protective peel coat on outside that should be removed after painting.       (B4)

289,-

329,-

Ikke på lager
-12%
Hovedbilde Traxxas 9578 Screw Pin 4x18mm (6)
Traxxas 9578 Screw Pin 4x18mm (6)
Screw pin, 4x18mm (with threadlock) (6) Set of six 4x18 mm screw pins with hex-drive heads come with pre-applied threadlock.

49,-

59,-

KJØP
-17%
Hovedbilde Traxxas 9042X Suspension Pin Set Hardened HD (for ...
Traxxas 9042X Suspension Pin Set Hardened HD (for ...
Suspension pin set, extreme heavy duty, complete (front and rear) (hardened steel) (3x52mm (4), 3x32mm (2), 3x40mm (2))/ M2.5x0.45mm NL (8) (for use with #9080 upgrade kit) Made from hardened steel, the Extreme Heavy-Duty Suspension Pin Set upgrades the screw pins in the Extreme Heavy Duty Upgrade Kit and locks them in place with locknuts. (Pins are not compatible with stock suspension parts) Accessory part for these models: Hoss® 4X4 VXL Rustler® 4X4 VXL Rustler® 4X4 Slash 4X4 Ultimate Slash 4X4 VXL Slash 4X4

189,-

KJØP
Hovedbilde Traxxas 9515 Body Mount Rear Sledge
Traxxas 9515 Body Mount Rear Sledge
Body Mount Rear Sledge

199,-

KJØP
Hovedbilde Traxxas 5137 Differential Oil 50K Weight Revo
Traxxas 5137 Differential Oil 50K Weight Revo
This is 50K wt Differential Oil for the Traxxas Revo                   but can be used in other vehicles as well. FEATURES: 50K weight oil INCLUDES: 1.75 oz (50cc) bottle of oil w/ 1-1/2" (38mm) pointed fill cap

89,-

Ikke på lager
Hovedbilde Traxxas 9032 Caster Blocks (C-Hub) HD Black L+R (for ...
Traxxas 9032 Caster Blocks (C-Hub) HD Black L+R (for ...
Caster blocks (c-hubs), extreme heavy duty, black (left & right)/ 3x32mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080 upgrade kit) Replacement caster blocks for the Extreme Heavy Duty Upgrade Kit. Caster blocks are for use with the 9080 upgrade kit only and will not fit standard suspension parts. Accessory part for these models: Hoss® 4X4 VXL Rustler® 4X4 VXL Rustler® 4X4 Slash 4X4 Ultimate Slash 4X4 VXL Slash 4X4

89,-

KJØP
Hovedbilde Traxxas 6873X Tires & Wheels, Goodrich S1/Split-Spoke, ...
Traxxas 6873X Tires & Wheels, Goodrich S1/Split-Spoke, ...
Tires & wheels, assembled, glued (S1 ultra-soft off-road racing compound) (SCT Split-Spoke satin chrome, black beadlock style wheels, BFG Mud-Terrain tires, foam inserts) (2) (4WD front/rear, 2WD rear only)

349,-

369,-

KJØP
-5%
Hovedbilde Traxxas 5823 Nerf Bars Chassis Slash
Traxxas 5823 Nerf Bars Chassis Slash
These are the replacement Nerf Bars for the Traxxas Slash. FEATURES: Black plastic construction INCLUDES: Two Nerf Bars for the Traxxas Slash REQUIRES: Installation onto Vehicle

49,-

Ikke på lager
Hovedbilde Traxxas 3948X Pinion Gear 18T-32P Hardened Steel
Traxxas 3948X Pinion Gear 18T-32P Hardened Steel
INFORMATION Gear, 18-T pinion (32-p), heavy duty (machined, hardened steel)/ set screw For some drivers, “heavy duty” just won’t cut it. When you drive on the ragged edge, you need parts that can withstand the brutal punishment that LiPo power can dish out. If full-throttle is the only language you know, Traxxas introduces a new line of pinion gears just for you. These gears come machined out of hardened steel in large 32-pitch format for your most hardcore bashing needs. They are available for Slash and Stampede 4X4 models as well as brushed versions of E-Revo and E-Maxx etc.This is a 18 Tooth 32 Pitch Pinion Gear for the Traxxas E-Maxx Truck or E-Revo            This is the gear which is attached directly to the motor. FEATURES: Machined Steel           Designed for a 3mm shaft INCLUDES: One 18 tooth Pinion Gear           One 3 x 4mm Set Screw REQUIRES: Assembly onto an E-Maxx truck or E-Revo           1.5mm hex wrench to tighten set screw. COMMENTS: This gear is only one of two which are used on the E-Maxx, E-Revo dual motor             set-up.

89,-

KJØP
Hovedbilde M-drive MD21015 Pro TiN Allen Wrench Straight Hex Tool ...
M-drive MD21015 Pro TiN Allen Wrench Straight Hex Tool ...
M-DRIVE PRO TiN Hex/Allen Wrench Tool - 1.5mm Straight Hex High quality PRO series hex/allen wrench tool with black anodized aluminium handles and tough hardened steel tip with a TiN coating.   Specs: Handle: Black & Gold anodized aluminium Laser Engraving: M-DRIVE logo & size/type Handle Diameter: 18.7mm Handle Length: 100mm Total Length: 180mm Tip/Bits Diameter: 3mm Tip/Bits Material: Hardened steel with TiN coating Suitable for: Straight Hex 1.5mm: For M3 electric motor pinion grub screws (most 1/10 - some larger pinions use a M4 screw that needs an straight 2mm)

89,-

99,-

KJØP
-10%
Hovedbilde Traxxas 6449 Spur Gear 54T 1.0 Metric Pitch XO-1
Traxxas 6449 Spur Gear 54T 1.0 Metric Pitch XO-1
 This is the 54T Spur Gear for the Traxxas XO-1. FEATURES: Molded plastic construction           1.0 metric pitch INCLUDES: 54T Spur Gear for the Traxxas XO-1

39,-

KJØP
Hovedbilde Traxxas 6448 Spur Gear 50T 1.0 Metric Pitch XO-1
Traxxas 6448 Spur Gear 50T 1.0 Metric Pitch XO-1
This is the 50T Spur Gear for the Traxxas XO-1. FEATURES: Molded plastic construction           1.0 metric pitch INCLUDES: 50T Spur Gear for the Traxxas XO-1

39,-

49,-

KJØP
-20%
Hovedbilde Traxxas 6855 Driveshaft Center Aluminum Slash 4x4
Traxxas 6855 Driveshaft Center Aluminum Slash 4x4
This is the Aluminum Center Driveshaft for the Traxxas Slash 4x4 Vehicles. FEATURES: Hollow aluminum construction           Anodized blue in color INCLUDES: One Aluminum Center Driveshaft REQUIRES: Installation on the vehicle SPECS:    Length: 215mm (8.5")           Diameter: 8.3mm (0.33")

125,-

KJØP
Hovedbilde Traxxas 3975R Titan 550 Reverse Rotation 21T Motor
Traxxas 3975R Titan 550 Reverse Rotation 21T Motor
Motor, Titan 550, reverse rotation (21-turns/ 14 volts) (1) The Titan® 550 reverse-rotation motor is a 21-turn fan-cooled 550 size powerhouse capable of handling 14.4 volts. This powerful motor has a 30% longer armature than a standard 540 size motor for extreme monster torque. SPECS:    Length to end of armature: 78mm (3.07")           Diameter of can: 38mm (1.5")           Length of motor leads: 75mm (2.96")           Shaft diameter: (3.2mm) 0.125" COMMENTS: For the standard rotation motor, order TRX 3975.

289,-

299,-

KJØP
-3%
Hovedbilde Traxxas 6841 Cover Center Driveshaft Slash 4X4
Traxxas 6841 Cover Center Driveshaft Slash 4X4
This is the Center Driveshaft Cover for the Traxxas Slash 4x4 Vehicles. FEATURES: Clear nylon construction INCLUDES: One Center Driveshaft Cover REQUIRES: Installation over driveshaft SPECS:    Length: 210mm (8.3")           Width: 15mm (0.59")

59,-

KJØP
Hovedbilde Badlands SC 2.2 Hovedbilde Badlands SC 2.2
Badlands SC 2.2"/3.0" M2 (Medium) Tires Mounted ...
Badlands SC 2.2"/3.0" M2 (Medium) Tires Mounted (ProTrac) for hex drive SC10's, 22SCT, and all ProTrac Slash Kits. Mounted on ProTrac Renegade Black Wheels This is a pair of pre-mounted Badlands All-Terrain Short Course Tires. Are you ready to chew up the dirt and spit it out in a huge spray behind your SC truck? If so, then the Badlands SC tire is exactly the tire that you have been waiting for. The Badlands SC tire offers motocross style tread with huge, long-lasting lugs giving it the looks and performance that have won over bashers all across the globe. The Badlands tread design is made for the die-hard motocrosser in you. Its oversized grass and dirt shredding lugs offer you the ultimate in performance under all-terrain type conditions. The lugs are designed to ensure longevity while spitting up the surface below. Made from soft yet durable M2 compound, the Badlands tire is poised for battle and ready to take your Short Course Truck to the next level of bashing heaven. Get a set of Badlands SC tires for your Short Course truck today! The Badlands SC tires are mounted on Renegade Black wheels. Radical, revolutionary maybe even a bit of an outlaw, that is what a Renegade is all about and it defines the new SC wheels from Pro-Line to a "T". That's right, the design department at Pro-Line thought it was time to change it up and bring to life another bold looking SC wheel. The Pro-Line Renegade wheel for SC trucks features a tough 10 spoke design replicating the latest in high performance full size forged racing wheels used by the pros. Detailed beadloc and lug nut hardware only adds to the realism. Be the Renegade at your track! Features: Reader's Choice Award Winning Tread Design Super-aggressive styling Motocross style tread for longevity and superior traction Latest generation V2 SC wide carcass for increased contact patch Soft, re-usable and water-proof Closed Cell foam inserts included Lightweight one-piece design 2.2" outer bead and 3.0" inner bead Simulated Bead-Loc ring Wheel made from high-strength, durable DuPont nylon material 10 Spoke design for increased rigidity Included: Mounted Badlands SC tire to ProTrac Renegade Black Wheels(2 pcs) Closed Cell inserts (2 pcs) Pro-Line decal (1) Fits: [F/R] Slash® 2wd with ProTrac Kit [F/R] Slash® 4x4 with ProTrac Kit [F/R] SC10 (using 12mm Adapter kit) [F/R] SC10 4x4 [F/R] SCT410 Specs: Tire Compound Colored Dot Chart Height:   4.40" (112mm) Width:   1.96" (50mm)

549,-

Ikke på lager
Hovedbilde Traxxas 6742G Toe Link Alu Green Front & Rear ...
Traxxas 6742G Toe Link Alu Green Front & Rear ...
Toe links (TUBES green-anodized, 7075-T6 aluminum, stronger than titanium) (87mm) (2)/ rod ends, rear (4)/ rod ends, front (4)/ aluminum wrench (1) Rustler/Hoss 4x4

439,-

KJØP
Hovedbilde RPM 80832 Rear Shock Tower for Slash 2WD, Stampede 2WD ...
RPM 80832 Rear Shock Tower for Slash 2WD, Stampede 2WD ...
RPM Rear Shock Tower for Slash 2WD, Stampede 2WD & Rustler 2WD Replaces stock Traxxas #3638 Quick Notes: Replaces stock Traxxas #3638 Fits Traxxas Slash 2WD, Stampede 2WD & Rustler 2WD Also fits the Bandit but see the “Tech Notes” below for important information Optional Front Shock Tower is also available RPM rear shock towers for the electric versions of the Slash, Stampede, Rustler & Bandit were designed with one thing in mind – rugged durability. Once again, we’ve exceeded our own expectations with this shock tower. While we’ve maintained all stock geometry on these shock towers, we’ve beefed them up in all the right places to eliminate annoying rear shock tower breakage. Our version of this shock tower uses an I-Beam construction that improves durability and rigidity as well. At the base of the shock tower, we’ve improved the screws’ head clearance of the bulkhead mounting screws to eliminate the bind normally associated with the stock rear shock tower. All these design elements combine to create the ultimate lightweight, bulletproof rear shock tower for the electric versions of the Slash, Rustler & Stampede. RPM rear shock towers for the Traxxas Slash, Electric Stampede, Electric Rustler & Bandit are molded in black and are backed by our famous breakage warranty. These towers are direct replacement parts for ease of installation. Tech Notes: These rear shock towers can be used on the Traxxas Bandit. However, there are no provisions for a rear wing built in.

99,-

Ikke på lager
Hovedbilde Traxxas 1726A Antenna, tube, black (1)/ vinyl antenna ...
Traxxas 1726A Antenna, tube, black (1)/ vinyl antenna ...
Antenna, tube, black (1)/ vinyl antenna cap (1)/ wire retainer (1)

29,-

KJØP
Hovedbilde Yeah Racing MG-32005 HD Steel 5mm Bore Motor ... Hovedbilde Yeah Racing MG-32005 HD Steel 5mm Bore Motor ...
Yeah Racing MG-32005 HD Steel 5mm Bore Motor ...
Yeah Racing HD Steel 5mm Bore Motor Gear/Pinions 32 Pitch 17 Teeth Description: 5mm bore 32 pitch pinions for your heavy duty and big vehicles! Made from HD steel for utmost durability and strength, prolongs the pinon's lifetime! Laser etched markings for you to clearly identify the size of the pinion with ease. Feature: For: 5mm Shaft Motors Material: HD Steel Color: Black Include: Pinion Gear (1 pc) Set Screw (1 pc)

59,-

KJØP
Hovedbilde 6,0V 2000mAh - Bronto RX Pack - Ni-Mh
6,0V 2000mAh - Bronto RX Pack - Ni-Mh
6,0V 2000mAh - Bronto RX Pack - Ni-Mh Lengde 71,5mm Bredde 52mm Høyde 14,5mm Plugg JR servoplugg Ledning 10cm 22AWG Vekt 144gram

185,-

KJØP
Hovedbilde Traxxas 6854A Stub Axle Front HD with Half Shaft
Traxxas 6854A Stub Axle Front HD with Half Shaft
Stub axle assembly, front, outer, extreme heavy duty (1) (left or right) (assembled with internal-splined half shaft)

79,-

KJØP
Hovedbilde Traxxas 6754 Stub Axle Front 1/10 Rally VXL
Traxxas 6754 Stub Axle Front 1/10 Rally VXL
This is the Stub Axle, Front, Steel-splined Constant Velocity  For the Traxxas 1/10 Rally VXL   FEATURES Made of steel   INCLUDES One stub axle   SPECIFICATIONS  Length: 36.5mm (23/16")  Diameter: 11.7mm (15/32")  Threaded part of shaft, length: 9.4mm (3/8")  diameter: 3.9mm (5/32")

89,-

KJØP

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png