Hopp til innhold
Hjem / Reservedeler/Option-parts / Option Parts Biler / Traxxas El-Biler / Slash 4x4 VXL / RPM 80709 Front or Rear A-arms for Slash 4×4, Stampede 4×4, Rust

RPM 80709 Front or Rear A-arms for Slash 4×4, Stampede 4×4, Rust

Art.nr: 80709

159,-

RPM

RPM
** Ikke på lager

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

RPM Front or Rear A-arms for Slash 4×4, Stampede 4×4, Rustler 4×4 & Hoss 4×4 - Red Replaces stock Traxxas #3655R & #3655X


Quick Notes:

  • Fits the 1/10 versions of the Slash 4×4, Stampede 4×4, Hoss 4×4 & Rally 4×4
  • Does not fit the Rally ST (please see RPM #73362)
  • Each a-arm is 6.5 grams lighter than stock*!
  • 2 packages is needed to complete one full vehicle (front & rear)
  • Replaces stock Traxxas #3655R & #3655X


RPM A-arms for the Traxxas Slash 4×4, Rustler 4×4, Hoss 4×4 & Stampede 4×4 are everything you’ve come to expect from RPM and more! Take a look at everything we’ve done:

We eliminated the slop in the suspension system, tightening the tolerances around the hinge pins, reduced the fore and aft movement of the A-arms at both the inner hinge pin and at the axle carriers by better than 90% and improved the durability dramatically (they’re made by RPM, enough said). As a bonus, we cut 6.5 grams of weight off of each A-arm*! That’s a total loss of just under one ounce of weight simply by replacing your stock A-arms with the RPM versions!

We can’t forget about how much better aesthetically the RPM versions look either. RPM A-arms carry over our traditional look with our 30 degree leading and trailing edges, and huge bosses for the shocks and sway bar mounts. Additionally, you now have the option of a bit of color with black, blue, green and red to choose from.

RPM A-arms are molded in our trademark blend of incredibly durable nylons and are backed by an industry leading warranty. We proudly stand behind our products! Designed, manufactured and produced right here in southern California in the USA!

Tech Notes: Replaces stock Traxxas #3655R & #3655X. RPM A-arms will not fit ST versions of the Rally (please see RPM #73362). RPM arms are sold in sets of 1 – left and 1 – right A-arm in each package. Two packages will be needed to complete one truck. The upper hinge pin hole of the rear axle carriers cannot be used (not a stock location for the Slash 4×4) due to strengthening designs that reduce the clearance around the rear axle.
 

Produsent

RPM

RPM

Relaterte produkter

 

Hovedbilde RPM 80705 Front or Rear A-arms for the Traxxas Slash ...
RPM 80705 Front or Rear A-arms for the Traxxas Slash ...
Art.nr: 80705
Copied
RPM Front or Rear A-arms for the Traxxas Slash 4×4, Stampede 4×4, Rustler 4×4, Hoss 4×4 & Rally Replaces TRX 3655R & 3655X Quick Notes: Fits the 1/10 versions of the Slash 4×4, Stampede 4×4, Hoss 4×4 & Rally 4×4 Does not fit the Rally ST (please see RPM #73362) Each a-arm is 6.5 grams lighter than stock*! 2 packages is needed to complete one full vehicle (front & rear) Replaces stock Traxxas #3655R & #3655X RPM A-arms for the Traxxas Slash 4×4, Rustler 4×4, Hoss 4×4 & Stampede 4×4 are everything you’ve come to expect from RPM and more! Take a look at everything we’ve done: We eliminated the slop in the suspension system, tightening the tolerances around the hinge pins, reduced the fore and aft movement of the A-arms at both the inner hinge pin and at the axle carriers by better than 90% and improved the durability dramatically (they’re made by RPM, enough said). As a bonus, we cut 6.5 grams of weight off of each A-arm*! That’s a total loss of just under one ounce of weight simply by replacing your stock A-arms with the RPM versions! We can’t forget about how much better aesthetically the RPM versions look either. RPM A-arms carry over our traditional look with our 30 degree leading and trailing edges, and huge bosses for the shocks and sway bar mounts. Additionally, you now have the option of a bit of color with black, blue, green and red to choose from. RPM A-arms are molded in our trademark blend of incredibly durable nylons and are backed by an industry leading warranty. We proudly stand behind our products! Designed, manufactured and produced right here in southern California in the USA! Tech Notes: Replaces stock Traxxas #3655R & #3655X. RPM A-arms will not fit ST versions of the Rally (please see RPM #73362). RPM arms are sold in sets of 1 – left and 1 – right A-arm in each package. Two packages will be needed to complete one truck. The upper hinge pin hole of the rear axle carriers cannot be used (not a stock location for the Slash 4×4) due to strengthening designs that reduce the clearance around the rear axle.  

159,-

Ikke på lager
Hovedbilde Traxxas 3655R Suspension arms, front/rear
Traxxas 3655R Suspension arms, front/rear
Art.nr: TRX 3655R
Copied
Utgått! Erstattet med TRX 3655-BLK Suspension arms, front/rear (left & right) (2) (heavy duty, cold weather material)

Hovedbilde Traxxas 3655X Suspension Arms Left & Right Slash 4x4
Traxxas 3655X Suspension Arms Left & Right Slash 4x4
Art.nr: TRX 3655X
Copied
This is the Left and Right Suspension Arms for the Traxxas Slash 4x4. FEATURES: Hardened plastic construction           Front or rear application INCLUDES: One left suspension arm           One right suspension arm REQUIRES: Installation on suspension assembly SPECS:    Length: 100mm (3.94")           Width: 45mm (1.77")           Thickness: 11.5mm (0.45") TRX 3655X

129,-

139,-

KJØP
-7%

Kunder kjøpte også

Hovedbilde Traxxas 9028 Camber Links Rear 71mm(cc) (2) Jato 4x4
Traxxas 9028 Camber Links Rear 71mm(cc) (2) Jato 4x4
Traxxas 9028 Camber Links Rear 71mm(cc) (2) Jato 4x4 Traxxas 9028 - Camber links, rear, 81mm (71mm center to center) (2) (assembled with hollow balls)

69,-

KJØP
Hovedbilde Traxxas 1985 Fiber Washers 5x8mm (20)
Traxxas 1985 Fiber Washers 5x8mm (20)
These are Replacement Washers from Traxxas. FEATURES: Black teflon construction.           Used on the axles and in the transmission. INCLUDES: (20) Washers SPECS:    Size:      5x8mm           Thickness: 0.5mm

29,-

KJØP
Hovedbilde Traxxas 6431 Splitter Mount XO-1
Traxxas 6431 Splitter Mount XO-1
                        This is the Splitter Mount     For the Traxxas 1/7 XO-1. FEATURES: Made of a black composite material INCLUDES: One splitter mount

89,-

KJØP
Hovedbilde Traxxas 6540 Telemetry Trigger Magnet 5x2mm XO-1
Traxxas 6540 Telemetry Trigger Magnet 5x2mm XO-1
This is the Telemetry Trigger Magnet for the Traxxas TQi Telemetry System. FEATURES: 5x2mm round magnet INCLUDES: Telemetry Trigger Magnet for the Traxxas TQi Telemetry System

25,-

KJØP
Hovedbilde Traxxas 6539 Magnet Holder/Center Diff/Magnet
Traxxas 6539 Magnet Holder/Center Diff/Magnet
   This is the Magnet Holder/Center Diff Telemetry Magnet from Traxxas. FEATURES: Plastic magnet holder INCLUDES: Magnet Holder, Center Diff Telemetry Magnet and three 3x8mm Screws

35,-

KJØP
Hovedbilde Traxxas 7436 Body Bumper Foam 1/10 Rally VXL
Traxxas 7436 Body Bumper Foam 1/10 Rally VXL
This is the Body Bumper Foam for the Traxxas 1/10 scale Rally Race Car FEATURES: Foam construction, black in color           Installs on chassis underneath front of body to help absorb frontal             impacts INCLUDES: Body Bumper Foam for the Traxxas 1/10 scale Rally Car SPECS:    Width: 7.7" (195mm)           Height: 0.90" (23mm)

59,-

69,-

KJØP
-14%
Hovedbilde Traxxas 7473T Tires & wheels, assembled, glued
Traxxas 7473T Tires & wheels, assembled, glued
Tires & wheels, assembled, glued (black wheels, gravel pattern tires, foam inserts) (2) (TSM rated)

329,-

KJØP
Hovedbilde RPM 70945 ESC Cage for the Traxxas VXL-3S (#3355R) ... Hovedbilde RPM 70945 ESC Cage for the Traxxas VXL-3S (#3355R) ...
RPM 70945 ESC Cage for the Traxxas VXL-3S (#3355R) ...
RPM ESC Cage -Blue- for the Traxxas VXL-3S (#3355R) ESC Fits the Traxxas #3355R VXL-3S ESC only Quick Notes: Fits the Traxxas #3355R VXL-3S ESC only Does not work with Traxxas #3355X ESCs We’ve had numerous requests for an ESC Cage for the #3355R version of the Traxxas VXL-3S ESC since the mounting tabs have been reported to us as weak. Why risk potential damage to your $220 (SRP) speed control when the RPM option is an inexpensive piece of insurance that will prevent those tabs from ever being a problem? Our solution is a simple, yet strong and effective one. We eliminated the use of the two mounting tabs on the ESC in favor of a complete cage system that solidly locks the ESC in place using RPM indestructible nylons. Our ESC Cage is the most effective, durable and best protection for your speed control possible. By completely surrounding and capturing the VXL-3S ESC, damage from broken tabs and ejection from the vehicle has been completely eliminated. The RPM VXL-3S ESC Cage works perfectly even if one or both mounting tabs on the ESC have already been broken or cut off! Now there’s no reason to rely on unpredictable adhesives or zip ties to retain your speed controller when our ESC Cage will lock it in place with 100% confidence each and every time! Each RPM ESC Cage is made from our incredibly strong, ultra lightweight blend of engineering grade nylons and factory-backed by our industry-leading limited lifetime warranty. RPM molded products are made with pride in the USA! Tech Notes: RPM VXL-3S ESC Cages are designed for the Traxxas VXL-3S ESC (Traxxas #3355R) only. While our ESC Cage will fit a variety of applications, they have been tested and only guaranteed to fit the following vehicles in stock form only – Stampede 4×4, Slash 4×4, Slash 2WD & Rally. Also fits the following vehicles as long as Traxxas #3725 Mounting Plate (stock item on VXL models) is used – Rustler 2WD, Stampede 2WD & Bandit.

129,-

KJØP
Hovedbilde Traxxas 9517T Wing Orange Sledge
Traxxas 9517T Wing Orange Sledge
Traxxas 9517T Wing Orange Sledge Wing (orange)/ wing washer / 4x12mm FCS (2)

199,-

KJØP
Hovedbilde Traxxas 9050G Stub Axle Carriers Rear HD (Pair) Green ...
Traxxas 9050G Stub Axle Carriers Rear HD (Pair) Green ...
Carriers, stub axle, rear, extreme heavy duty, green (left & right)/ 3x41mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080 upgrade kit) Replacement stub axle carriers for the Extreme Heavy Duty Upgrade Kit. Axle carriers are for use with the 9080 upgrade kit only and will not fit standard axles. Accessory part for these models: Hoss® 4X4 VXL Rustler® 4X4 VXL Rustler® 4X4 Slash 4X4 Ultimate Slash 4X4 VXL Slash 4X4

79,-

KJØP
Hovedbilde Traxxas 9037G Steering Blocks HD Green L+R (for ...
Traxxas 9037G Steering Blocks HD Green L+R (for ...
Steering blocks, extreme heavy duty, green (left & right)/ 3x20mm BCS (2) (for use with #9080 upgrade kit) Replacement steering blocks for the Extreme Heavy Duty Upgrade Kit. Steering blocks are for use with the 9080 upgrade kit only and will not fit standard axles. Accessory part for these models: Hoss® 4X4 VXL Rustler® 4X4 VXL Rustler® 4X4 Slash 4X4 Ultimate Slash 4X4 VXL Slash 4X4

69,-

79,-

KJØP
-13%
Hovedbilde Traxxas 9032G Caster Blocks (C-Hub) HD Green L+R (for ...
Traxxas 9032G Caster Blocks (C-Hub) HD Green L+R (for ...
Caster blocks (c-hubs), extreme heavy duty, green (left & right)/ 3x32mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080 upgrade kit) Replacement caster blocks for the Extreme Heavy Duty Upgrade Kit. Caster blocks are for use with the 9080 upgrade kit only and will not fit standard suspension parts. Accessory part for these models: Hoss® 4X4 VXL Rustler® 4X4 VXL Rustler® 4X4 Slash 4X4 Ultimate Slash 4X4 VXL Slash 4X4

89,-

KJØP
Hovedbilde Yeah Racing RC BALL PTFE BEARING 5X12X4MM 10PCS Hovedbilde Yeah Racing RC BALL PTFE BEARING 5X12X4MM 10PCS
Yeah Racing RC BALL PTFE BEARING 5X12X4MM 10PCS
RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings.   Feature:   More durable Higher precision Material: Metal Bearing, Rubber Shield   Include:   PTFE Bearing 5x12x4mm (10pcs)

89,-

99,-

KJØP
-10%
Hovedbilde Traxxas 9018 Body Jato 4x4 Clear Hovedbilde Traxxas 9018 Body Jato 4x4 Clear
Traxxas 9018 Body Jato 4x4 Clear
Traxxas 9018 - Body, Jato® 4X4 Brushless (also fits Jato® 4X4 VXL) (clear, requires painting)/window masks, decal sheet From mild to wild, Traxxas clear bodies are your own personal canvas. You choose the color and design and Traxxas ProGraphix® paint makes it easy to get professional quality results. Body comes fully-trimmed with a protective overspray film applied. Window masking and decals also come in the kit.

369,-

389,-

KJØP
-5%
Hovedbilde Traxxas 9027 Toe Links 88mm(cc) (Set) Jato 4x4
Traxxas 9027 Toe Links 88mm(cc) (Set) Jato 4x4
Traxxas 9027 Toe Links 88mm(cc) (Set) Jato 4x4 Toe links, molded composite, 98mm (88mm center to center) (black) (2)/ steering link (1)

69,-

KJØP
Hovedbilde Traxxas 9029 Camber Links Front 80mm(cc) (2) Jato 4x4
Traxxas 9029 Camber Links Front 80mm(cc) (2) Jato 4x4
Traxxas 9029 Camber Links Front 80mm(cc) (2) Jato 4x4 Camber links, front, 90mm (80mm center to center) (2) (assembled with hollow balls)

69,-

KJØP
Hovedbilde Traxxas 9044 Skidplate Front + Rear Jato 4x4
Traxxas 9044 Skidplate Front + Rear Jato 4x4
Traxxas 9044 Skidplate Front + Rear Jato 4x4 Skid plates (front & rear)

99,-

109,-

KJØP
-9%
Hovedbilde Traxxas 9045 Mounts Sway Bar F+R Jato 4x4
Traxxas 9045 Mounts Sway Bar F+R Jato 4x4
Traxxas 9045 Mounts Sway Bar F+R Jato 4x4 Mounts, sway bar (front & rear)

69,-

KJØP
Hovedbilde Traxxas 9025 Chassis Brace Front & Rear Jato 4x4
Traxxas 9025 Chassis Brace Front & Rear Jato 4x4
Traxxas 9025 Chassis Brace Front & Rear Jato 4x4 Mounts, chassis brace (front & rear)

95,-

KJØP
Hovedbilde Traxxas 9021 Latch Body Mounts Jato 4x4 (Pair)
Traxxas 9021 Latch Body Mounts Jato 4x4 (Pair)
Traxxas 9021  Latch Body Mounts Jato 4x4 (Pair) Latch, body mount, left (1)/ right (1) (for clipless body mounting) (attaches to #9018 body)

79,-

KJØP
Hovedbilde Traxxas 9034-ORNG Shock Tower Rear EHD Orange Jato 4x4
Traxxas 9034-ORNG Shock Tower Rear EHD Orange Jato 4x4
Traxxas 9034-ORNG Shock Tower Rear EHD Orange Jato 4x4   Shock tower, rear (Orange)

79,-

KJØP
Hovedbilde Traxxas 7420 Body Mounts Clipless (Pair) Ford Fiesta ...
Traxxas 7420 Body Mounts Clipless (Pair) Ford Fiesta ...
Traxxas 7420 Clipless mounts, body (left & right) (for #7412 series bodies) Left and right clipless body mounts for the 7412-series Ford® Fiesta® ST clipless body. Replacement part for these models: Ford® Fiesta® ST Rally Brushless

79,-

KJØP
Hovedbilde Traxxas 9024-ORNG Chassis Brace Jato 4x4 Orange
Traxxas 9024-ORNG Chassis Brace Jato 4x4 Orange
Traxxas 9024-ORNG Chassis Brace Jato 4x4 Orange

255,-

275,-

KJØP
-7%
Hovedbilde Traxxas 9033-ORNG Shock Tower Front EHD Orange Jato ...
Traxxas 9033-ORNG Shock Tower Front EHD Orange Jato ...
Traxxas 9033-ORNG Shock Tower Front EHD Orange Jato 4x4   Shock tower, front (Orange)

79,-

KJØP
Hovedbilde Traxxas 5827 Hold Down Battery Slash
Traxxas 5827 Hold Down Battery Slash
This is the Hold Down Battery Set for the 2WD Traxxas Slash. FEATURES: Black nylon construction INCLUDES: One Battery Hold Down           One Retainer Hold Down           One Battery Post           One Foam Spacer           One Angled Body Clip REQUIRES: Installation on the chassis

79,-

89,-

KJØP
-11%

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png