Hopp til innhold
Hjem / Reservedeler/Option-parts / Option Parts Biler / Traxxas El-Biler / Slash 4x4 VXL / Traxxas 6854A Stub Axle Front HD with Half Shaft

Traxxas 6854A Stub Axle Front HD with Half Shaft

Art.nr: TRX 6854A

79,-

Traxxas

Traxxas
På lager: 5

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Stub axle assembly, front, outer, extreme heavy duty (1) (left or right) (assembled with internal-splined half shaft)

Produsent

Traxxas

Traxxas

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

Hovedbilde Traxxas 108046-1 Mini Rally Ford RS200 RTR TQi VXL-3s Hovedbilde Traxxas 108046-1 Mini Rally Ford RS200 RTR TQi VXL-3s
Traxxas 108046-1 Mini Rally Ford RS200 RTR TQi VXL-3s
Traxxas 108046-1 - Mini Rally Ford RS200 VXL RTR - Including 2s LiPo & USB-C Charger - WHITE Legendary Performance in a Compact Chassis Few cars in history have achieved the cult status of the legendary Ford® RS200 rally car. Built to conquer the ultra-competitive Group B racing series, the RS200 combined outrageous power with a featherweight chassis and AWD traction. Traxxas honors the rich history of the RS200 with the all-new Mini Rally VXL Ford RS200 replica. Equipped with 1/10 scale VXL-3s™ brushless power, the compact Mini Rally VXL scorches the pavement with astonishing acceleration and 88+ kph top speed. Race like a champion in your own rally stage with the Traxxas Mini Rally VXL Ford RS200. Rally-Bred Performance Like a full-size Group B rally car, the Traxxas Mini Rally VXL Ford RS200 rockets off the line with AWD traction and razor-sharp precision. Traxxas engineered Mini Rally VXL to make its outrageous power accessible to all drivers with superior handling and the reassurance of TSM®. Equally at home on dirt or pavement, Mini Rally VXL turns almost any surface into a rally stage. Extreme 1/10 Scale Brushless Power The Velineon VXL-3s brushless power system lies at the heart of Traxxas’ fastest and most powerful 1/10 scale vehicles. This extreme 11.1-volt powerplant comes installed in the compact Mini Rally chassis for outrageous performance. The result is astonishing acceleration, 88+ kph speed, and wheel-standing power at any rpm. 1/10 Scale AWD Driveline Dropping 1/10 scale Velineon power in a compact platform requires bold engineering. Mini Rally VXL comes outfitted with the proven driveline components of Traxxas’ toughest 1/10 scale 4X4 vehicles. Front, center, and rear steel-gear differentials, along with 32-pitch gearing and HD driveshafts, far exceed requirements for strength and long life. Maxx Chassis Technology Mini Rally VXL uses revolutionary chassis design elements pioneered in Mini Maxx. Perfectly sized to fit into a backpack, Mini Rally VXL transforms 1/10 scale performance and durability into a supremely compact chassis. Just one look at the rigid, unified structure and you know it’s built Maxx tough. Officially Licensed Ford RS200 Clipless Body An iconic car like the Ford RS200 requires a detailed replica body with clean flowing lines. Traxxas clipless technology holds the RS200 body tightly to the chassis with a reassuring snap to let you know it’s secure. Molded side mirrors and air scoops attach to the internal frame for extra strength and rigidity. New High-Traction Rally Tires Mini Rally VXL wears new high-traction rally tires for outstanding grip on pavement and dirt. Internal reinforcing ribs replace conventional tire foams for more consistent and longer lasting tread support. Mounted to new 8-spoke rally-inspired wheels, the tires feature aggressive tread blocks for exceptional bite on loose surfaces. What’s In The Box: Mini Rally VXL Ready-To-Race rally car Clipless replica Ford RS200 body Velineon VXL-3s brushless power system 3500 mAh 2-cell LiPo battery 2-amp USB-C charger Quick Start Guide TQi 2.4 GHz radio system Optional pinion gear High quality maintenance tools What You’ll Need: AA Alkaline Batteries: Four AA alkaline batteries for the transmitter Charging Accessories: Power adapter 2912 and power cable 2916 recommended for peak charging performance Specs: Name: Mini Rally VXL Ford RS200 Type: Rally car Top Speed: 64+ kph with included 2-cell LiPo. 88+ kph with optional 3-cell LiPo (sold separately) Skill Level: 1 Scale: Mini Length: 416 mm Width: 223 mm Height: 145 mm Weight: 1.83 kg Track: 183 mm Wheelbase: 262 mm Ground Clearance: 21 mm Driveline: Shaft-driven all-wheel drive Transmission: Direct drive, center differential Differential Type: Planetary, steel gear Gear Pitch: 32 Steering Servo: 2075X Radio System: TQi 2.4 GHz (2-channel) Battery Compartment Specs: L113 x W41 x H22 mm MOTOR SPECS Name: Velineon® 3500 Type: Sensorless brushless Weight: 262 g Length: 77 mm overall length, 56 mm can length Diameter: 36 mm Shaft Size: 3 mm Connector Type: 3.5 mm bullet ESC SPECS Name: VXL-3s electronic speed control Type: Brushless Motor Connectors: 3.5 mm bullet Battery Connectors: Traxxas High-Current Connector Power Wire: 12 gauge Maxx Cable

4.995,-

5.395,-

KJØP
-7%
Hovedbilde Traxxas 2825X Li-Po Battery 2S 7.4v 3500mAh 25C ...
Traxxas 2825X Li-Po Battery 2S 7.4v 3500mAh 25C ...
Traxxas 2825X - 3500mAh 7.4V 2-Cell 25C LiPo Battery The 3500 mAh 2-cell LiPo battery delivers maximum punch and long runtimes for your Mini Maxx®. Traxxas Certified iD®-Equipped LiPo batteries provide the on-demand power to reach the top speeds that Traxxas models are built to deliver. Traxxas’ exclusive iD battery system is the easier and safer way to charge your Traxxas batteries. Only Traxxas gives you more of what you want most: simple installation, a great price, and the most speed and run time available. Specs: Type: LiPo Total Capacity: 3500mAh Voltage: 7.4 C Rating: 25 Length: 110mm Height: 22mm Width: 35mm

529,-

579,-

KJØP
-9%
Hovedbilde RPM 70772 Shock Tower Rear Rustler 4x4, Hoss
RPM 70772 Shock Tower Rear Rustler 4x4, Hoss
RPM Rear Shock Tower for Traxxas Rustler 4x4 & Hoss 4x4 If you're looking to improve the strength & durability of your Rustler 4x4 or Hoss 4x4, look no further than RPM. Our new Front & Rear Shock Towers are based on our Slash 4x4 shock tower designs with proven performance and durability. We revamped the design of our Slash 4x4 shock towers and modified them to accommodate the clip-less body mounting system that the Rustler 4x4 & Hoss 4x4 utilize. The results are a perfect blend of old and new that is tough, rugged and can handle whatever your track or bash location can throw at them! RPM Rustler 4x4 & Hoss 4x4 Shock Towers are molded in our bulletproof blend of engineering grade nylons and come with our limited lifetime warranty against breakage. Don't let a fun race or bash day get cut short with inferior parts. Trust RPM with parts designed, engineered and manufactured in the USA! Tech Notes: RPM Front Shock Towers for the Rustler 4x4 and Hoss 4x4 replace stock Traxxas #6739 while the Rear Shock Towers replace stock Traxxas #6738.

149,-

KJØP
Hovedbilde Traxxas 1952 Stub Axle Housing (2)
Traxxas 1952 Stub Axle Housing (2)
This is a set of two replacement rear hub carriers from Traxxas. These hub carriers mount to the rear lower control arms, and hold the rear axles.

39,-

KJØP
Hovedbilde Traxxas 6716 Body Washers Foam Set
Traxxas 6716 Body Washers Foam Set
Traxxas 6716 Body Washers Foam Set Body washers, foam, 2mm (4)/ 3mm (4)/ 4mm (4) Adhesive-backed foam body washers help protect your custom paint work by providing a cushion between the body and body post for more secure mounting and less rattling.

29,-

KJØP
Hovedbilde Traxxas 2542 Countersunk Machine Hex Drive Screws ...
Traxxas 2542 Countersunk Machine Hex Drive Screws ...
 These are the Traxxas Countersunk 4 x 12mm Screws. FEATURES: Metal construction           Black in color INCLUDES: Six 4 x 12mm Countersunk Flathead Hex Screws REQUIRES: Installation on the vehicle

35,-

KJØP
Hovedbilde Traxxas 2535 Countersunk Hex Screw 4x10mm Jato (6)
Traxxas 2535 Countersunk Hex Screw 4x10mm Jato (6)
 These are the Countersunk 4mm x 10mm Screws              for the Traxxas Nitro Jato Stadium Truck. FEATURES: Metal construction           Black in color INCLUDES: Six 4mm x 10mm Countersunk Flathead Hex Screws REQUIRES: Assembly onto Vehicle

35,-

KJØP
Hovedbilde Traxxas 3936 Button Head Machine Screw 4x10mm Revo (6) ...
Traxxas 3936 Button Head Machine Screw 4x10mm Revo (6) ...
 This is a 4x10mm Button Head Screw Set for the Traxxas Revo vehicle. FEATURES: Steel construction           Black in color           Low-profile, button-head design           Hex drive (allen type) INCLUDES: Six Screws REQUIRES: Assembly to vehicle SPECS:    Overall Length:  16mm (.63")           Threaded Length: 10mm (.39")           Thread Size:     M4x.7mm coarse           Hex Wrench Size  2.5mm COMMENTS: Used on the Revo to mount the Electronics Box.

35,-

KJØP
Hovedbilde Traxxas 2579 Button Head Machine Screw 3x15mm Revo (6) ...
Traxxas 2579 Button Head Machine Screw 3x15mm Revo (6) ...
This is a package of six 3x15mm Traxxas Button Head Screws. FEATURES: Steel construction, Black in color           Used on the Traxxas Revo monster truck, can also be used in any             application where a 3x15mm button head screw is required INCLUDES: Six 3x15mm Traxxas Button Head Screws REQUIRES: 2mm hex head wrench. SPECS:    Length:  15mm           Diameter: 3mm

35,-

KJØP
Hovedbilde Traxxas 3937 Button Head Machine Screw 4x12mm Revo (6)
Traxxas 3937 Button Head Machine Screw 4x12mm Revo (6)
This is a Traxxas 4X12mm Button Head Screw Set. FEATURES: Steel construction           Black in color           Low-profile, button-head design           Hex drive (allen type) INCLUDES: Six Screws REQUIRES: Assembly to vehicle SPECS:    Overall Length:  12mm (.63")           Threaded Length: 11mm (.45")           Thread Size:     M4x.7mm coarse           Hex Wrench Size  2.5mm COMMENTS: Used on the Revo to mount the transmission skid plate.

35,-

Ikke på lager
Hovedbilde Traxxas 6533X Micro TQi 5-channel Telemetry TSM ...
Traxxas 6533X Micro TQi 5-channel Telemetry TSM ...
Traxxas 6533X - Receiver, micro, TQi 2.4GHz with telemetry & TSM® (5-channel)   This is the Traxxas TQi Stability Management Receiver. FEATURES Compatible with Traxxas TQi transmitters equipped with a Multi- Function knob Turned on or off and adjusted via the Multi-Function Knob, or by adjusting the slider in the Traxxas link app Provides greater control on loose dirt, concrete, ice and snow Stabilizes vehicles over rough surfaces as the gyro effect of the spinning front tires continue to "steer" when vehicle is in the air Allows faster cornering speeds Does not restrict throttle Improves braking performance and prevents spinouts Fully conpatible with Traxxas Link Works invisibly in the background to allow driver to maintain connected feel with the vehicle INCLUDES Traxxas TQi Stability Management Receiver REQUIREMENTS Traxxas TQi transmitters with Multi-Function knob Connecting to Traxxas Link App (iOS or Android version) required to update receiver firmware with TSM profile for specific model Traxxas Link Wireless Module may also be required depending on TQi radio to connect to a smartphone via bluetooth

649,-

699,-

KJØP
-7%
Hovedbilde Hitec 54701S Y Heavy Duty Extension Wire Short
Hitec 54701S Y Heavy Duty Extension Wire Short
This is a 6" Long, Heavy Duty Y-Harness with Hitec S, JR, Airtronics Z Connectors. Features     Hitec 54701S Y-Harness 6"     Gold-plated teminals improve conductivity and prevent oxidation for     longer lifespan.     Heavier, 20-gauge wire handles higher current loads. Specifications     Fork in "Y" occurs 2" from the receiver connector     Overall Length: 6"     Connectors: one male and two female Contents     One 6" Long, Heavy Duty Y-Harness with Hitec S, JR, Airtronics Z Connectors

89,-

109,-

KJØP
-18%
Hovedbilde Traxxas 6893X Aluminum Bearing Adapter Blue Slash 4X4
Traxxas 6893X Aluminum Bearing Adapter Blue Slash 4X4
This is an optional Bearing Adapter for the Slash 4X4. FEATURES: 6061-T6 anodized blue aluminum construction           Steel 10x15x4mm ball bearing with blue rubber seal           Used on slipper shaft INCLUDES: One aluminum adapter           One 10x15x4mm ball bearing REQUIRES: Installation on to slipper shaft           Remaining clutch pieces

69,-

KJØP
Hovedbilde Tamiya 85021 Spray Lacquer TS-21 Gold 3 oz
Tamiya 85021 Spray Lacquer TS-21 Gold 3 oz
 This is a 100ml Spray Can of Synthetic Lacquer Paint from Tamiya. FEATURES: Cures in a short period of time.           Extremely useful for painting large surfaces.           100ml is enough to fully cover two or three 1/24 scale sized car             bodies.           Tamiya spray paints are not affected by acrylic or enamel paints.             Therefore, following the painting of the entire assembly, details             can be added or picked out using enamel and/or acrylic paints.  By             combining three different paints, the decoration of plastic             models will become simpler and more effective.           Available in 52 colors. INCLUDES: One 100ml Spray Can of Synthetic Lacquer Gold Paint. REQUIRES: Eye, Lung and Skin Protection. COMMENTS: Highly Flammable, Pressurized Container.            Keep out of the reach of children.

109,-

KJØP
Hovedbilde Traxxas 7468 Caps/Springs Retainers (2)
Traxxas 7468 Caps/Springs Retainers (2)
These are the Caps and Spring Retainers        Traxxas GTR XX-Long Shocks, TRX7462X , and Long Shocks, TRX 7461X. FEATURES: Steel and plastic construction INCLUDES: Two Upper and Lower Caps           Four Hollow Steel Balls           Two Upper and Lower Spring Retainers

59,-

KJØP
Hovedbilde Traxxas 6786 Bearing Set Complete 4x4
Traxxas 6786 Bearing Set Complete 4x4
Traxxas 6786 - ­­4X4 Bearing Kit Restore your Traxxas model to peak performance with this bearing kit. The bearing kit swaps out the standard bearings with new factory-fresh replacements. Individual compartments keep everything organized in the box with a handy label to measure and identify the parts. Not all bearings compatible with BL-2s models ­ 4X4 BEARING KIT FEATURES ­All-inclusive bearing kit Individual box compartments Handy label for identifying parts

369,-

399,-

KJØP
-8%
Hovedbilde Traxxas 6855 Driveshaft Center Aluminum Slash 4x4
Traxxas 6855 Driveshaft Center Aluminum Slash 4x4
This is the Aluminum Center Driveshaft for the Traxxas Slash 4x4 Vehicles. FEATURES: Hollow aluminum construction           Anodized blue in color INCLUDES: One Aluminum Center Driveshaft REQUIRES: Installation on the vehicle SPECS:    Length: 215mm (8.5")           Diameter: 8.3mm (0.33")

125,-

KJØP
Hovedbilde Traxxas 6832X Caster Blocks Aluminum Left & Right ... Hovedbilde Traxxas 6832X Caster Blocks Aluminum Left & Right ...
Traxxas 6832X Caster Blocks Aluminum Left & Right ...
This is a optional Traxxas Aluminum Caster Block Set, and is intended for use with the Traxxas Slash 4x4 truck. These caster blocks are CNC Machined from 6061 Aluminum, and will increase the durability of the front end of the Slash 4x4, especially when paired with the Traxxas Aluminum Steering Block Set (TRX6837X)

469,-

499,-

KJØP
-6%
Hovedbilde RPM 80702 Front or Rear A-arms for the Traxxas Slash ...
RPM 80702 Front or Rear A-arms for the Traxxas Slash ...
Front or Rear A-arms for the Traxxas Slash 4×4, Stampede 4×4, Rustler 4×4, Hoss 4×4 & Rally Replaces TRX 3655R & 3655X Quick Notes: Fits the 1/10 versions of the Slash 4×4, Stampede 4×4, Hoss 4×4 & Rally 4×4 Does not fit the Rally ST (please see RPM #73362) Each a-arm is 6.5 grams lighter than stock*! 2 packages is needed to complete one full vehicle (front & rear) Replaces stock Traxxas #3655R & #3655X RPM A-arms for the Traxxas Slash 4×4, Rustler 4×4, Hoss 4×4 & Stampede 4×4 are everything you’ve come to expect from RPM and more! Take a look at everything we’ve done: We eliminated the slop in the suspension system, tightening the tolerances around the hinge pins, reduced the fore and aft movement of the A-arms at both the inner hinge pin and at the axle carriers by better than 90% and improved the durability dramatically (they’re made by RPM, enough said). As a bonus, we cut 6.5 grams of weight off of each A-arm*! That’s a total loss of just under one ounce of weight simply by replacing your stock A-arms with the RPM versions! We can’t forget about how much better aesthetically the RPM versions look either. RPM A-arms carry over our traditional look with our 30 degree leading and trailing edges, and huge bosses for the shocks and sway bar mounts. Additionally, you now have the option of a bit of color with black, blue, green and red to choose from. RPM A-arms are molded in our trademark blend of incredibly durable nylons and are backed by an industry leading warranty. We proudly stand behind our products! Designed, manufactured and produced right here in southern California in the USA! Tech Notes: Replaces stock Traxxas #3655R & #3655X. RPM A-arms will not fit ST versions of the Rally (please see RPM #73362). RPM arms are sold in sets of 1 – left and 1 – right A-arm in each package. Two packages will be needed to complete one truck. The upper hinge pin hole of the rear axle carriers cannot be used (not a stock location for the Slash 4×4) due to strengthening designs that reduce the clearance around the rear axle. *Weight comparison based on Traxxas #3655X.

159,-

Ikke på lager
Hovedbilde Traxxas 6754 Stub Axle Front 1/10 Rally VXL
Traxxas 6754 Stub Axle Front 1/10 Rally VXL
This is the Stub Axle, Front, Steel-splined Constant Velocity  For the Traxxas 1/10 Rally VXL   FEATURES Made of steel   INCLUDES One stub axle   SPECIFICATIONS  Length: 36.5mm (23/16")  Diameter: 11.7mm (15/32")  Threaded part of shaft, length: 9.4mm (3/8")  diameter: 3.9mm (5/32")

89,-

KJØP
Hovedbilde Traxxas 6796 LED Light Roof Rustler 4x4 (Body (#6717)
Traxxas 6796 LED Light Roof Rustler 4x4 (Body (#6717)
Traxxas 6796 LED Light Roof Rustler 4x4 (Body (#6717)

239,-

259,-

KJØP
-8%
Hovedbilde Traxxas 1747G 4mm Flanged Nuts Green (4)
Traxxas 1747G 4mm Flanged Nuts Green (4)
 This is a package of four 4mm Flanged Locknuts in Green from Traxxas. FEATURES: May be used in any application requiring this size locknut           Serrated rear section ensures sure grip INCLUDES: Four 4mm Flanged Locknuts REQUIRES: 7mm Nut Driver SPECS:    Hex Size: 7mm           Hole Diameter: 4mm

99,-

109,-

KJØP
-9%
Hovedbilde Traxxas 2514 Sponsor Decal Sheet
Traxxas 2514 Sponsor Decal Sheet
     This is a Sponsor Decal Set for R/C Cars                                 from Traxxas. FEATURES: These decals are designed to be used on any scale lexan R/C car and             truck bodies.           Pressure sensitive, peel and stick vinyl decals.           These are the contingency/sponsorship decals that are used on race             cars.           Logos include: Traxxas, Lunati Cams, Hedman Hedders, Simpson, MSD,             Mr. Gasket, NOS, Accel, Hurst, and more.           Multi-purpose decal set is appropriate for any type of car. INCLUDES: One Sponsor Decal Set. SPECS:    Length: 9-1/8" (23.2cm)           Width:  5-1/8" (13.0cm)

59,-

KJØP
Hovedbilde Traxxas 6830X Bulkhead Front Slash 4x4
Traxxas 6830X Bulkhead Front Slash 4x4
NB! Traxxas har byttet delenummer fra TRX 6830 til TRX 6830X   This is the Front Bulkhead for the Traxxas Slash 4x4. FEATURES: Hardened plastic construction           Black in color INCLUDES: One front bulkhead REQUIRES: Installation on chassis

75,-

Ikke på lager
Hovedbilde Traxxas 6888X Front Hardened Steel Drive Hub Slash 4x4 ...
Traxxas 6888X Front Hardened Steel Drive Hub Slash 4x4 ...
This is the Front Hardened Steel Drive Hub for use on the Traxxas Slash 4x4. FEATURES: Hardened steel construction INCLUDES: One Drive Hub           One Screw Pin REQUIRES: Installation on the vehicle SPECS:    Length: 19mm (0.75")           Diameter: 12mm (0.47")

59,-

KJØP

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png