Hopp til innhold
-20%

Traxxas 6448 Spur Gear 50T 1.0 Metric Pitch XO-1

Art.nr: TRX 6448

39,-

49,-

- 20%
Traxxas

Traxxas

På lager: 4

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

This is the 50T Spur Gear for the Traxxas XO-1.

FEATURES: Molded plastic construction
          1.0 metric pitch

INCLUDES: 50T Spur Gear for the Traxxas XO-1

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

Tires, Sledgehammer® (2)/ foam inserts (2)

379,-

399,-

KJØP
-5%
Traxxas 6492X Gear, 25-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)

89,-

99,-

KJØP
-10%
Gear, center differential, 44-tooth

135,-

KJØP
This is a package of six 3x10mm Traxxas Countersunk Hex Head Screws. FEATURES: Steel construction, Black in color           Used on the Traxxas Revo monster truck, can also be used in any             application where a 3x10mm countersunk screw is required INCLUDES: Six 3x10mm Traxxas Countersunk Hex Screws REQUIRES: 2mm hex head wrench. SPECS:    Length:  10mm           Diameter: 3mm

35,-

KJØP
Wheel washers, green (4)

29,-

39,-

KJØP
-26%
These are the Shock Caps for the Traxxas X-Maxx Monster Truck,     FEATURES Molded composite plastic construction  Steel ball link inserts in shock caps   INCLUDES Two each;  Caps  Spring Perches  Adjusters  2.5x14mm Cap Screws

69,-

KJØP
  Skidplate center

119,-

129,-

KJØP
-8%
Wheel hubs, hex, aluminum (red-anodized) (4)   Replaces the stock plastic wheel hexes with the ruggedness and good looks of red-anodized aluminum.

235,-

KJØP
EC5 PAIRS (10PCS)

419,-

439,-

KJØP
-5%
Traxxas 7830X - HD Suspension arm Blue, (right lower, front or rear), heavy duty (1) Designed for the Extreme New heavy-duty X-Maxx suspension arms use our toughest composite material. Whether you’re sending it at the skate park, or launching from a ramp, these arms are built with just the right amount of flex to resist breakage. These popular accessories stand up to the most punishing drivers and even cold weather. Six colors available! Black, Blue, Red, Orange, Green & White

145,-

KJØP
Traxxas 7831X - HD Suspension arm Blue, lower (left, front or rear), heavy duty (1) Designed for the Extreme New heavy-duty X-Maxx suspension arms use our toughest composite material. Whether you’re sending it at the skate park, or launching from a ramp, these arms are built with just the right amount of flex to resist breakage. These popular accessories stand up to the most punishing drivers and even cold weather. Six colors available! Black, Blue, Red, Orange, Green & White

145,-

KJØP
Traxxas 7829X - HD Suspension arm Blue, upper (right or left, front or rear), heavy duty (1) Designed for the Extreme New heavy-duty X-Maxx suspension arms use our toughest composite material. Whether you’re sending it at the skate park, or launching from a ramp, these arms are built with just the right amount of flex to resist breakage. These popular accessories stand up to the most punishing drivers and even cold weather. Six colors available! Black, Blue, Red, Orange, Green & White

119,-

KJØP
RPM Threaded Hinge Pins for X-Maxx Fits* stock Traxxas A-arms as well as RPM #82352, #82354 & #82355 Quick Notes: Manufactured from stainless steel Fits* stock Traxxas A-arms as well as RPM #82352, #82354 & #82355 Can be used in place of CEN #GS025* Works in the outer, lower a-arm hinge pin location only In response to customer demand, we’re proud to release a set of threaded hinge pins for the Traxxas X-Maxx. RPM Threaded Hinge Pins work with stock Traxxas A-arms as well as RPM A-arms, are manufactured from stainless steel and are tough as nails! If you’ve lost or damaged your stock hinge pins, or perhaps you’re tired of losing those tiny hinge pin retaining screws, give RPM threaded hinge pins a shot and never look back! Tech Notes: RPM Threaded Hinge Pins are 4mm x 56mm and work in the outer, lower A-arm hinge pin location only. Each kit comes with 4 – threaded hinge pins and 4 – M3 locknuts. Our hinge pins can be used as a replacement for CEN GS025 hinge pins as well but RPM versions use a 3mm locknut instead of a 4mm version. When used with the X-Maxx (using stock or RPM A-arms), some minor modification of the A-arms is required for the hinge pins to fit (see instructions for more information).

129,-

139,-

KJØP
-7%
VAPEX LiPo-Safe Storage Bag-E 260x130x150mm Protect your family and home from the potential hazard of LiPo charging. This LiPo Safe Bag is designed to limit and contain the fire caused by incorrectly or poorly functioning LiPo's, especially during charging but also during storage. Features: Perfect storage bag for most RC batteries Zipper Flap/Top Bag-A, B, C & D fits inside it Size: 260x130x150mm We urge all customers to always practice extreme caution when charging and never leave a charging battery unattended! Warning: Never leave batteries unattended while being charged Always ensure the battery and the LiPo Safe Bag is placed on a non-flammable surface such as concrete Always seal the LiPo Safe Bag while charging The LiPo Safe Bag is intended to reduce the chances of damage in the event of a LiPo fire

169,-

189,-

KJØP
-11%
EC5 PARALLEL CONNECTOR, 12AWG, 100MM MERKE Radient PRODUKT Adapter KONTAKT EC5

119,-

129,-

KJØP
-8%
RPM Body Savers for Traxxas X-Maxx Bodies Works with Traxxas #7711, #7711A & #7717G, #7711R & #7711X bodies Quick Notes: Works with new or damaged bodies Disguised for improved visual appeal Works with Traxxas #7711, #7711A & #7717G, #7711R & #7711X bodies The clipless body mounting system Traxxas uses on the X-Maxx is a handy system to have but it tends to have one fatal flaw – the mounting screw holes crack easily, rendering those expensive new bodies useless fairly quickly. If you’ve managed to pull any of your body mounting screws through the body or if you think it’s about to happen, we have the perfect solution to save you from ugly, thick body washers or worse, buying a new body. RPM Body Savers for the X-Maxx are a simple, yet clever solution to solve that problem. Out front, they look like molded hood vents (2) and A/C vents (2) while in the rear, they look like exposed sections of riveted metal (2). It’s a perfect way to camouflage their intended purpose and yet still keep the body firmly attached. The way they work is straightforward and twofold. Out front, they work similarly to oversized washers, yet have significantly more surface area than most washers, without detracting from the looks of your favorite ride. Out back, there are two pairs of screws holding the sub-frame of the body mounting system to the body. Our rear Body Savers tie two pairs of screws together, dispersing the pressure of holding the body to the sub-frame over a wide area of the body. Even if the bottom of the mounting holes in the body are completely ripped out from prior crashes, our system still works! RPM Body Savers are molded in black from our ultra strong, engineering grade nylons for unmatched performance and are sold with enough Body Savers to protect the entire vehicle. Tech Notes: RPM Body Savers are tested to work with Traxxas #7711, #7711A & #7717G, #7711R & #7711X bodies only. They have not been tested nor are they guaranteed to work with any other Traxxas or aftermarket bodies.

199,-

KJØP
Traxxas 7727R Bulkhead, rear (upper) (fits X-Maxx® 8s or XRT™) Rear upper bulkhead fits 8s X-Maxx® and XRT™ Replacement part for these models: XRT™ X-MAXX™ 8s

69,-

KJØP
Steering Blocks Left & Right (XRT Spec) X-Maxx, XRT Steering blocks, left & right/ caster blocks (c-hubs), left & right/ 20x32x7mm bearings (2)/ 15x24x5mm bearings (2) These left and right steering blocks and caster blocks were redesigned and beefed-up for XRT. Standard in XRT, they can be used to upgrade X-Maxx for extreme duty and maximum strength. Includes two 20x32x7 mm bearings and two 15x24x5 mm bearings. Accessory part for these models: XRT X-Maxx

319,-

349,-

KJØP
-9%
Radient 010069 EC5 Serie-kontakt, 12AWG, 100mm Engelsk: Radient 010069 EC5 Series Connector, 12AWG, 100mm

109,-

119,-

KJØP
-8%
Ultimate Handling for Extreme Performance The Traxxas Maxx offers more power than ever before into a 1/10 scale monster truck platform. To take things up another level, the Traxxas WideMaxx kit extends the track width by 20 mm per side, allowing you to bury the throttle in the turns, soak up even more extreme terrain, and come out the other side ready for more.   The WideMaxx kit consists of extended versions of the Maxx’s extreme-duty cold-weather suspension arms, available in 6 total colors to allow you to customize your truck to your style. Additionally, new springs are included for the rear of the truck to dial in the suspension settings, while the original rear springs move to the front for optimum balance and performance. Finally, a set of wider toe links for the front finish out the new widened stance.   Available in six different color options Widens the Maxx by 1.57” (40 mm) for increased cornering stability Extended arms constructed from extreme-duty cold weather compound Kit Includes: Upper suspension arms (4) Lower suspenson arms (4) WideMaxx toe links (2) Rear springs (1.725 rate)   Installation is simple, thanks to the Maxx’s thoughtful engineering throughout which makes removal and replacement of the included components quick and easy. The option to utilize existing components including the stock axles saves time and gets you back to the action with a whole new driving experience even faster.     Optional WideMaxx Upgrades:   Steel CV Driveshafts Built to take brutal punishment in stride, the Maxx's optional steel CV driveshafts #8996X are extended specifically for the WideMaxx kit. The set features all-steel construction and includes all required bearings. (#8654, #8654G, or #8654R and #7758, #7758G, or #7758R required for a complete set). Shafts also available separately (#8996A).   TUBES Toe Links TUBES lightweight 7075-T6 aluminum toe links are 30% lighter than steel and stronger than titanium. These are the strongest toe links you can buy for your WideMaxx. The secret is in the unique hollow tube design that maximizes stiffness and resistance to bending, while at the same time reducing weight. TUBES are the perfect high-performance upgrade for your WideMaxx and come brilliantly anodized in four different colors: orange (#8997A), green (#8997G), red (#8997R), and blue (#8997X).

639,-

699,-

KJØP
-9%
Traxxas 70WT/900cSt Premium Shock Oil 60ml New from Traxxas is a complete line of premium silicone shock oil. Available in seven steps of viscosity, this 100% pure silicone oil allows precise vehicle suspension tuning for maximum performance, no matter where you drive. The precision-pour, the twist-nozzle cap makes it quick and easy to fill shock bodies, without all the mess. cSt viscosity specification ensures consistent performance with every bottle. Features: Seven precise viscosities ranging from 200cSt to 1000cSt (20wt to 80wt) 100% silicone oil for maximum consistency Precision-pour, twist-nozzle cap Specs: Viscosity: 70WT (900cSt) Bottle size: 60ml

99,-

109,-

KJØP
-9%
  Bronto ladekabler er et must for RC-entusiasten. Ladekabelen er utstyrt med kvalitets 14AWG ledninger. Ladeledningen har en praktisk lengde på 30cm, noe som er godt egnet når du f.eks skal legge batteriet trygt i en sikker ladebag mens det lades. Ladekabel med Traxxas ID plugg for 4s LiPo til 4mm bananplugger. Benyttes for lading av batterier med Traxxas ID-plugg, og kobles rett i ladere med 4mm tilkobling. Spesifikasjoner   Ledning 14AWG Lengde 30cm Tilkobling 1 4mm Banan Tilkobling 2 Traxxas ID 4s

159,-

KJØP
M-DRIVE PRO TiN Hex/Allen Wrench Tool - 1.5mm Straight Hex High quality PRO series hex/allen wrench tool with black anodized aluminium handles and tough hardened steel tip with a TiN coating.   Specs: Handle: Black & Gold anodized aluminium Laser Engraving: M-DRIVE logo & size/type Handle Diameter: 18.7mm Handle Length: 100mm Total Length: 180mm Tip/Bits Diameter: 3mm Tip/Bits Material: Hardened steel with TiN coating Suitable for: Straight Hex 1.5mm: For M3 electric motor pinion grub screws (most 1/10 - some larger pinions use a M4 screw that needs an straight 2mm)

89,-

99,-

KJØP
-10%
Front or Rear A-arms for the Traxxas Slash 4×4, Stampede 4×4, Rustler 4×4, Hoss 4×4 & Rally Replaces TRX 3655R & 3655X Quick Notes: Fits the 1/10 versions of the Slash 4×4, Stampede 4×4, Hoss 4×4 & Rally 4×4 Does not fit the Rally ST (please see RPM #73362) Each a-arm is 6.5 grams lighter than stock*! 2 packages is needed to complete one full vehicle (front & rear) Replaces stock Traxxas #3655R & #3655X RPM A-arms for the Traxxas Slash 4×4, Rustler 4×4, Hoss 4×4 & Stampede 4×4 are everything you’ve come to expect from RPM and more! Take a look at everything we’ve done: We eliminated the slop in the suspension system, tightening the tolerances around the hinge pins, reduced the fore and aft movement of the A-arms at both the inner hinge pin and at the axle carriers by better than 90% and improved the durability dramatically (they’re made by RPM, enough said). As a bonus, we cut 6.5 grams of weight off of each A-arm*! That’s a total loss of just under one ounce of weight simply by replacing your stock A-arms with the RPM versions! We can’t forget about how much better aesthetically the RPM versions look either. RPM A-arms carry over our traditional look with our 30 degree leading and trailing edges, and huge bosses for the shocks and sway bar mounts. Additionally, you now have the option of a bit of color with black, blue, green and red to choose from. RPM A-arms are molded in our trademark blend of incredibly durable nylons and are backed by an industry leading warranty. We proudly stand behind our products! Designed, manufactured and produced right here in southern California in the USA! Tech Notes: Replaces stock Traxxas #3655R & #3655X. RPM A-arms will not fit ST versions of the Rally (please see RPM #73362). RPM arms are sold in sets of 1 – left and 1 – right A-arm in each package. Two packages will be needed to complete one truck. The upper hinge pin hole of the rear axle carriers cannot be used (not a stock location for the Slash 4×4) due to strengthening designs that reduce the clearance around the rear axle. *Weight comparison based on Traxxas #3655X.

159,-

Ikke på lager
Robinson Racing 7851 Gen3 Replacement Bearing 7x13 COMPATIBILITY HPI Savage X Traxxas E-Revo Traxxas Revo Nitro Traxxas T-Maxx  

59,-

KJØP
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png