Hopp til innhold

Traxxas 6742G Toe Link Alu Green Front & Rear Complete(2)

Art.nr: TRX 6742G

439,-

Traxxas

Traxxas

På lager: 1

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Toe links (TUBES green-anodized, 7075-T6 aluminum, stronger than titanium) (87mm) (2)/ rod ends, rear (4)/ rod ends, front (4)/ aluminum wrench (1) Rustler/Hoss 4x4

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Relaterte produkter

 

Art.nr: TRX 6742X
Copied
  Toe links (TUBES blue-anodized, 7075-T6 aluminum, stronger than titanium) (87mm) (2)/ rod ends (4)/ aluminum wrench (1)

439,-

KJØP

Kunder kjøpte også

6,0V 2000mAh - Bronto RX Pack - Ni-Mh Lengde 71,5mm Bredde 52mm Høyde 14,5mm Plugg JR servoplugg Ledning 10cm 22AWG Vekt 144gram

185,-

KJØP
Front or Rear A-arms for the Traxxas Slash 4×4, Stampede 4×4, Rustler 4×4, Hoss 4×4 & Rally Replaces TRX 3655R & 3655X Quick Notes: Fits the 1/10 versions of the Slash 4×4, Stampede 4×4, Hoss 4×4 & Rally 4×4 Does not fit the Rally ST (please see RPM #73362) Each a-arm is 6.5 grams lighter than stock*! 2 packages is needed to complete one full vehicle (front & rear) Replaces stock Traxxas #3655R & #3655X RPM A-arms for the Traxxas Slash 4×4, Rustler 4×4, Hoss 4×4 & Stampede 4×4 are everything you’ve come to expect from RPM and more! Take a look at everything we’ve done: We eliminated the slop in the suspension system, tightening the tolerances around the hinge pins, reduced the fore and aft movement of the A-arms at both the inner hinge pin and at the axle carriers by better than 90% and improved the durability dramatically (they’re made by RPM, enough said). As a bonus, we cut 6.5 grams of weight off of each A-arm*! That’s a total loss of just under one ounce of weight simply by replacing your stock A-arms with the RPM versions! We can’t forget about how much better aesthetically the RPM versions look either. RPM A-arms carry over our traditional look with our 30 degree leading and trailing edges, and huge bosses for the shocks and sway bar mounts. Additionally, you now have the option of a bit of color with black, blue, green and red to choose from. RPM A-arms are molded in our trademark blend of incredibly durable nylons and are backed by an industry leading warranty. We proudly stand behind our products! Designed, manufactured and produced right here in southern California in the USA! Tech Notes: Replaces stock Traxxas #3655R & #3655X. RPM A-arms will not fit ST versions of the Rally (please see RPM #73362). RPM arms are sold in sets of 1 – left and 1 – right A-arm in each package. Two packages will be needed to complete one truck. The upper hinge pin hole of the rear axle carriers cannot be used (not a stock location for the Slash 4×4) due to strengthening designs that reduce the clearance around the rear axle. *Weight comparison based on Traxxas #3655X.

159,-

Ikke på lager
Yeah Racing HD Steel 5mm Bore Motor Gear/Pinions 32 Pitch 17 Teeth Description: 5mm bore 32 pitch pinions for your heavy duty and big vehicles! Made from HD steel for utmost durability and strength, prolongs the pinon's lifetime! Laser etched markings for you to clearly identify the size of the pinion with ease. Feature: For: 5mm Shaft Motors Material: HD Steel Color: Black Include: Pinion Gear (1 pc) Set Screw (1 pc)

59,-

KJØP
Big bore shock technology from the on-road shocks transplanted onto off-road shocks! Gain more consistent handling through the enlarged shock bodies which houses more shock oil! Included is already a spring attached, so all you have to do is add oil and mount it to your rig! No more tedious assembly required!   Features: For: Traxxas 1/10 Slash ,Stampede, Bandit, Arrma  Material: Aluminum 90mm Hole to Hole Color: Red   Includes: TR-XB Big Bore Shocks (2 pcs)

279,-

KJØP
Antenna, tube, black (1)/ vinyl antenna cap (1)/ wire retainer (1)

29,-

KJØP
Denne erstatter TRX 6845  This is the replacement Steering Bellcrank Set for the Traxxas Slash 4X4. FEATURES: Composite nylon construction, black in color           Replaces a worn or damaged bellcrank set INCLUDES: One Left Bellcrank Lower           One Left Bellcrank Upper           One Right Bellcrank           One Draglink           One Spring Retainer           Two Servo Arms           Two Shoulder Screws           Two 3x15 Counter Sunk Machine Screws           Two Hallow Balls REQUIRES: Assembly and installation following the model manual and included              instruction sheet

149,-

169,-

KJØP
-12%
RPM Rear Shock Tower for Slash 2WD, Stampede 2WD & Rustler 2WD Replaces stock Traxxas #3638 Quick Notes: Replaces stock Traxxas #3638 Fits Traxxas Slash 2WD, Stampede 2WD & Rustler 2WD Also fits the Bandit but see the “Tech Notes” below for important information Optional Front Shock Tower is also available RPM rear shock towers for the electric versions of the Slash, Stampede, Rustler & Bandit were designed with one thing in mind – rugged durability. Once again, we’ve exceeded our own expectations with this shock tower. While we’ve maintained all stock geometry on these shock towers, we’ve beefed them up in all the right places to eliminate annoying rear shock tower breakage. Our version of this shock tower uses an I-Beam construction that improves durability and rigidity as well. At the base of the shock tower, we’ve improved the screws’ head clearance of the bulkhead mounting screws to eliminate the bind normally associated with the stock rear shock tower. All these design elements combine to create the ultimate lightweight, bulletproof rear shock tower for the electric versions of the Slash, Rustler & Stampede. RPM rear shock towers for the Traxxas Slash, Electric Stampede, Electric Rustler & Bandit are molded in black and are backed by our famous breakage warranty. These towers are direct replacement parts for ease of installation. Tech Notes: These rear shock towers can be used on the Traxxas Bandit. However, there are no provisions for a rear wing built in.

99,-

Ikke på lager
Driveshaft, center, 6061-T6 aluminum (green-anodized)

109,-

KJØP
This is an optional Wheelie Bar for the Traxxas                    Electric Stampede, Rustler and Bandit. FEATURES: Constructed of hardened plastic, black in color           Installs at rear of chassis to prevent vehicle from flipping over             during wheelies INCLUDES: Assembled optional Wheelie Bar with mounting instructions and             hardware REQUIRES: Fastening to rear of chassis

209,-

229,-

KJØP
-9%
  This is the 500K Weight Differential Oil from Traxxas. FEATURES: Lubricates differential           Clear in color           500K weight INCLUDES: One .70oz (20cc) Bottle Of 500K Diff Lube REQUIRES: Application to differential

119,-

139,-

Ikke på lager
-14%
Toe link, front & rear (molded composite) (2)/ hollow balls (4) (87mm center to center) Pair of 87 mm composite toe links come assembled with hollow balls. Fits front or rear.

49,-

59,-

KJØP
-17%
Oil, differential (100K wt) (0.7 oz (20cc)) Traxxas performance differential oils make it easy to increase or decrease the limited slip action of the gear differential by using higher or lower viscosity oil. Depending on the track conditions, altering the limited slip capability can enhance turning performance for faster exit speeds. FEATURES: 100K weight oil INCLUDES: 0.7oz  (20cc) bottle of oil w/ 1-1/2" pointed fill cap

99,-

109,-

Ikke på lager
-9%
This is a pair of Long Shock Springs for the                    Traxxas GTR Long Shocks. FEATURES: Steel construction, white in color           0.767 (black) compression rating INCLUDES: Two XX-Long Shock Springs SPECS:    Length: 1.8" (47mm)           Wire Diameter: 0.039" (1mm)

69,-

KJØP
Camber links, rear (TUBES green-anodized 7075-T6 aluminum, stronger than titanium) (73mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3x15 BCS (4) required for installation)

419,-

KJØP
Camber links, front (TUBES green-anodized, 7075-T6 aluminum, stronger than titanium) (83mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3x15 BCS (4) required for installation)

439,-

459,-

KJØP
-4%
Carriers, stub axle (green-anodized 6061-T6 aluminum) (rear) (2)

329,-

359,-

KJØP
-8%
Shocks, GTR xx-long green-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) (2)

459,-

499,-

KJØP
-8%
Shocks, GTR long green-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) (2)

429,-

449,-

KJØP
-4%
Steering blocks, 6061-T6 aluminum (green-anodized), left & right

349,-

389,-

KJØP
-10%
Caster blocks (c-hubs), 6061-T6 aluminum (green-anodized), left & right

469,-

499,-

KJØP
-6%
This is a pair of XX-Long Shock Springs for the                    Traxxas GTR XX-Long Shocks. FEATURES: Steel construction, white in color           0.874 (black) compression rating INCLUDES: Two XX-Long Shock Springs SPECS:    Length: 2.2" (57mm)           Wire Diameter: 0.059" (1.5mm)

59,-

KJØP
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png