Traxxas

-9%

Yeah Racing YT-0192 Aluminum 7mm Lock Nut Driver Black Gold

Art.nr: YT-0192

99,-

~~109,-~~

- 9%

Yeah Racing

Yeah Racing

** Ikke på lager

Du vil motta en e-post så snart produktet er på lager!

En feil har oppstått. Prøv igjen

Informasjon
Produsent

Informasjon

Yeah Racing Aluminum 7mm Lock Nut Driver Black Gold

Description:

With an anti-slip design handle and tips with an improved material for the tips these sleek black tools with a gold trim will sure be the best tools for you to keep in your pitbox!

Feature:

For: Car Building
Material: Aluminum
Color: Black/Gold

Include:

Nut Driver (1 pc)

Produsent

Yeah Racing

Yeah Racing

Relaterte produkter

Hovedbilde Yeah Racing YT-0187 Aluminum Drive Hex Wrench Set ...

Yeah Racing YT-0187 Aluminum Drive Hex Wrench Set ...

Art.nr: YT-0187

Copied

Yeah Racing Aluminum Drive Hex Wrench Set (1.5/2.0/2.5/3.0mm Hard Steel Allen Wrench) Black/Gold Description: With an anti-slip design handle and tips with an improved material for the tips these sleek black tools with a gold trim will sure be the best tools for you to keep in your pitbox! This set comes with the most used four sizes, so you can buy this set not having to worry not having the right tool! Feature: For: Car Building Material: Aluminum Color: Black/Gold Include: Allen Drivers (4 pcs)

349,-

399,-

-13%

Hovedbilde MIP 9620 Wrench Set, 1.5mm, 2.0mm Hex & 7.0mm Nut ...

MIP 9620 Wrench Set, 1.5mm, 2.0mm Hex & 7.0mm Nut ...

Art.nr: 9620

Copied

#9620 - MIP Wrench Set Gen 2, 1.5mm, 2.0mm Hex Wrench & 7.0mm Nut Driver MIP Gen 2 Tools: Same Iconic Look, Amplified Awesomeness! For over 30 years, MIP tools have been the go-to gear for RC enthusiasts who demand the best. The iconic amber handles and rock-solid build have become synonymous with precision, performance, and passion. But even legends deserve an upgrade, and that's where the all-new MIP Gen 2 tools come in. No More Wrench Wraps! MIP Gen 2 tools now boast laser-etched size markings that are clear, crisp, and impossible to miss. Plus, each tool now sports a vibrant color-coded ring for instant identification. Nut Drivers New and Improved Too! MIP Gen 2 Nut Drivers still feature their color-coded rings for instant identification but now boast laser-etched size markings that are clear, crisp, and impossible to miss. Plus, each Nut Driver is now Black Oxide coated instead of Nickle Plated improving the lifespan of it and protecting it from scratches, corrosion, and the general wear and tear of RC life. Your MIP Nut Driver will stay looking and performing like new for longer. Consistency is King: The MIP Gen 2 line is designed to create a cohesive look and feel across your entire tool collection. The subtle yet impactful design tweaks reinforce the iconic MIP identity, making it easier than ever to spot those legendary amber handles in your toolbox. It's not just about aesthetics, it's about building a sense of confidence and reliability that comes from knowing you're using the best. Evolution, Not Revolution: Don't worry, the core of what makes a MIP tool a MIP tool remains unchanged. The rock-solid construction, the precise tolerances, the uncompromising quality – it's all there, just enhanced and refined. The Gen 2 update is about building on the legacy, not abandoning it. It's about taking the tools you love and making them even more awesome while making every tweak, tune, and adjustment smoother, faster, and more satisfying than ever before. So, are you ready to experience the next level of RC tool awesomeness? Experience the future of RC tools with MIP Gen 2 Tools! Package Includes: 1 x 1.5mm Hand Wrench 1 x 2.0mm Hand Wrench 1 x 7.0mm Nut Driver Hex Driver Tool Makeup: Precision Ground with Diamond wheels to remove internal stress and part fatigue Made from US Grade tool steel drill blanks Tight tolerances held within 20 Microns which is .02 mm and moreover .0008 in. ! To put that into perspective that's like taking a human hair and dividing it by 4 ! Nut Driver Tool Makeup: Steel construction, optimized for durability and long wear characteristics Black Oxide coated for durability and protection against oxidation or corrosion Deep Socket head able to reach nuts located on long screws. Thin wall tool head in order to fit into those tight areas. Laser Engraved with MIP Logo and Size of Nut driver Color Coded ring to quickly distinguish one size from another. Super Comfy to the hand Polycarbonate Handles that are resilient to hot and cold weather, so wont harm your hands in poor weather conditions. Every tool assembled by hand Manufactured and packaged 100% in the USA Accolades: Highly regarded as the #1 Tool in the RC industry for almost 30 years of production. Used by World Champions and hobbyists alike around the World Trusted wrench to get out stripped screws other sub par tools create

849,-

Hovedbilde Yeah Racing YT-0209 4 In 1 Hex Screwdriver Wrench ...

Hovedbilde Yeah Racing YT-0209 4 In 1 Hex Screwdriver Wrench ...

Yeah Racing YT-0209 4 In 1 Hex Screwdriver Wrench ...

Art.nr: YT-0209

Copied

4 In 1 Hex Screwdriver Wrench 1.5-3.0mm Black Gold Multi sized hex driver containing 4 hex tips from 1.5mm to 3.0mm in 0.5mm increments. The hex tips are stored inside the handle cap, for easy tip management and storage so that there is a less chance for losing them. Magnetised tips for easy screw pickup. Feature: For: Any RC model which requires 1.5 to 3.0mm hex tips Material: Aluminum/Steel Color: Black/Gold Include: Multitip Tool (1pc) 1.5mm Tip (1pc) 2.0mm Tip (1pc) 2.5mm Tip (1pc) 3.0mm Tip (1pc)

219,-

Kunder kjøpte også

Hovedbilde Yeah Racing DDL-090OR 90mm Desert Lizard Two Stage ...

Hovedbilde Yeah Racing DDL-090OR 90mm Desert Lizard Two Stage ...

Yeah Racing DDL-090OR 90mm Desert Lizard Two Stage ...

Yeah Racing 90mm Desert Lizard Two Stage Internal Spring Damper Pair Orange For 1/10 Crawler 'G6 Certified' Description: Introducing the Yeah Racing Desert Lizard internal spring shock for crawlers comes pre-assembled for easy upgrading your current rig! Comes with a full set of springs and machined pistons for you to set up your rig for all sorts of different conditions! Included are springs for you to build either a droop or a sprung setup, a sprung setup will create a rig that will generate a lot of flex and more suspension travel. For the droop setup, your rig will sit lower and because of a spring under the piston, will be less prone to rolling over but will generate less flex. Featuring a triple O-Ring sealing cartridge that will prevent shock oil leakage! *Photos for reference only. Feature: For: HPI Crawler King / Gmade R1 KOMODO / Vaterra K5 / AXIAL SCX10 / RC Crawlers Material: Aluminum Include: Yeah Racing 90mm Desert Lizard Two Stage Internal Spring Damper (2 pcs) Springs (16 pcs) Pistons (8 pcs) Mounting Hardware (1 pack) Note: The pre-installed spring combo is for heavy rigs, we recommend experimenting with different spring combinations with what works with your rig weight and tire combination. Manual:

319,-

349,-

-9%

Hovedbilde Onyx 2215 Adapter Male T-Plug to Female XT90

Onyx 2215 Adapter Male T-Plug to Female XT90

Onyx Adapter Male T-Plug to Female XT90

89,-

Hovedbilde DynoMAX 9573B Connector Bullet 4mm 10pair

Hovedbilde DynoMAX 9573B Connector Bullet 4mm 10pair

DynoMAX 9573B Connector Bullet 4mm 10pair

Male Bullet Specs: Bullet Male Connector Diameter: 4mm Bullet Male Connector Length: 12.5mm Total Length: 18.5mm Max Wire Diameter: 3mm Outer Diameter: 4.75 mm Female Bullet Specs: Bullet Connector Female Diameter: 4mm Bullet Connector Female Depth: 15mm Total Length: 20.5mm Max Wire Diameter: 3.9mm Outer Diameter: 4.75 mm

129,-

Hovedbilde Traxxas 8278 Rod Ends Offset (4) TRX-4

Hovedbilde Traxxas 8278 Rod Ends Offset (4) TRX-4

Traxxas 8278 Rod Ends Offset (4) TRX-4

Rod Ends Offset (4) TRX-4

49,-

Hovedbilde Traxxas 8276 Rod Ends Standard (10) TRX-4

Traxxas 8276 Rod Ends Standard (10) TRX-4

Rod Ends Standard (10) TRX-4

89,-

Hovedbilde HPI 1146 Firebolt 15T Motor (540 Type)

HPI 1146 Firebolt 15T Motor (540 Type)

THIS PART FITS THE FOLLOWING KITS / PARTS: RS4 SPORT 3 DRIFT TEAM WORTHOUSE NISSAN S15 RS4 Sport 3 Drift 2015 Ford Mustang RS4 SPORT 3 RTR KEN BLOCK 1965 FORD

189,-

Hovedbilde Tamiya 58694 RC Toyota GR 86

Hovedbilde Tamiya 58694 RC Toyota GR 86

Tamiya 58694 RC Toyota GR 86

Tamiya 58694 RC Toyota GR 86 Length: 428mm. Image shows painted and assembled kit. A Mouthwatering Prospect The Toyota GR 86 is a lightweight front-engine, rear-wheel-drive sports car which was announced in April 2021; Powered by a 2.4-liter horizontally opposed four-cylinder DOHC engine capable of 235hp, the GR 86 delivers direct feel and the joy of driving to owners. It is recreated by this R/C model assembly kit, with the stylish form expertly recreated by a polycarbonate body. ★This image gives another angle on the model, with the car’s stylish form captured by a polycarbonate body. ★Headlight cases are separate polycarbonate parts, and give a super realistic look with stickers applied. ★The air intakes which sandwich the front bumper on either side are also depicted with authenticity by stickers. ★The Functional Matrix Grille is also depicted using a sticker; the license plate is cut out of polycarbonate. ★Stickers on the rear of the front fenders are on hand to ensure that air outlets are realistically rendered. ★Side mirrors use two types of black (bottom: semi-gloss); mirror surfaces are also cut out of polycarbonate. ★Left: The roof indentation is captured in style, as is the stylish shark fin. ★Right: The duckbill trunk lid is an eye-catcher. Rear combination lamps are separate polycarbonate parts. TT-02: Adaptable, balanced shaft driven 4WD The shaft-driven 4WD TT-02 chassis employs a longitudinal layout with the battery on the left and the motor on the right, to give excellent stability. In addition, it features identical left and right suspension arms and uprights for ease of assembly, plus easy-to-maintain gearboxes. It is a highly adaptable chassis, as it offers 2 different wheelbases, 2 ground clearance settings and 2 tread set-ups in addition to a range of 10 possible gear ratios. It is not short on looks either, with brake disc-shaped wheel hubs and stylish front bumper supports. Black 10-spoke wheels use tread patterned semi-pneumatic tires. ★Left: Resin ball links in the steering linkage joints make for smooth, comfortable motion. ★Right: Wheel hubs are shaped to look like brake discs. ★Left: Motor cover includes removable cooling duct (not attached in image). ★Right: This image gives a closer look at the rear double-wishbone suspension with friction dampers. Specifications ★Length: 428mm, width: 188mm, height: 131mm ★Wheelbase: 257mm ★Tire width/diameter: 27/67mm (front & rear) ★Bathtub-type frame ★Shaft-driven 4WD ★Front/rear 4-bevel resin differentials ★3-piece steering tie-rod ★4-wheel double wishbone suspension ★Front/rear friction dampers ★Gear ratio = 8.27:1 (9 further ratios from 11.38:1 to 7.28:1 possible with use of separately-sold pinions) ★Type 540 motor ★Electronic Speed Controller (ESC) Separately Required Items ★2-channel R/C system ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger

1.595,-

1.895,-

-16%

Hovedbilde Yeah Racing TATT-S03BU RWD Drift Performance ...

Hovedbilde Yeah Racing TATT-S03BU RWD Drift Performance ...

Yeah Racing TATT-S03BU RWD Drift Performance ...

Yeah Racing RWD Drift Performance Conversion Kit for Tamiya TT02 Description: Upgrade your TT02 from a backyard basher to a high-performance RWD drift car with parts designed with the purpose of throwing massive slides in mind! Parts made from precision CNC aluminum, meaning fitment will not be an issue. Everyone knows a large steering angle is required for RWD drifting, the steering rack has been redesigned around the original chassis so it will be a drop-in installation whilst achieving a large steering angle with the upgrade steering rack! Combined with the highly adjustable suspension and steering geometry, you will be able to tune the performance and behavior to your liking! Adjustable rear universals have been included so that you can also adjust trackwidth. Updated DSG dampers with longer ballcups to allow for more droop and the possibility to tune the "throw" of your chassis when going into the corner. *Photos for reference only. Car is not included. Feature: For: Tamiya TT02 Material: Aluminum Color: Blue Include: TATT-009 Aluminum Track Width Adjustable Front Lower Suspension Arm for TT-02 RWD Drift TATT-S03 Blue (1 pc) TATT-010 Aluminum Track Width Adjustable Rear Lower Suspension Arm for TT-02 RWD Drift TATT-S03 Blue (1 pc) TATT-011 Aluminum Front/Rear Upper Arm for TT-02 RWD Drift TATT-S03 Blue (2 pcs) TATT-012 Aluminum Rear Hub for TT-02 RWD Drift TATT-S03 Blue (1 pc) TATT-013 Aluminum Front Knuckle for TT-02 RWD Drift TATT-S03 Blue (1 pc) TATT-014 Aluminum RWD Large Angle Steering for TT-02 RWD Drift TATT-S03 Blue (1 pc) TATT-018 G45 Steel Adjustable Drive Shaft for TT-02 RWD Drift TATT-S03 (1 pc) TATT-022 Shock-Gear 50mm Damper Set for TT-02 RWD Drift TATT-S03 Blue (1 pc)

2.295,-

2.595,-

-12%

Hovedbilde Yeah Racing AXCP-007 Brass Adjustable Shock Mount 4pcs ...

Hovedbilde Yeah Racing AXCP-007 Brass Adjustable Shock Mount 4pcs ...

Yeah Racing AXCP-007 Brass Adjustable Shock Mount 4pcs ...

Brass Adjustable Shock Mount 4pcs For Axial Capra Fine tune how your rig handles by adjusting the shock angle and droop travel with these brass shock mounts. Adding a tiny bit of weight allowing you extract more grip from your tires! Features: For: Axial Capra Material: Brass Color: Brass Includes: Shock Mounts (4 pcs) Screws (1 pack)

219,-

Hovedbilde Castle Creations CC BEC 10A 6S Switching Regulator

Castle Creations CC BEC 10A 6S Switching Regulator

This is the CC BEC 10A Receiver Battery Eliminator by Castle Creations. FEATURES: Eliminates the need for a receiver and servo battery pack Draws higher voltage from the motor batteries and drops it to a voltage level suitable for the receiver and servos INCLUDES: One CC BEC receiver battery eliminator REQUIRES: Installation in the aircraft SPECS: Length: 1.2" (30mm) Width: .6" (15mm) Height: .4" (10mm) Weight: .4oz (11g) Input voltage: 5V to 25.2V (2S to 6S LiPo) Current output: 12 volts input = 7 amps* continuous, 10 amp peak; 24 volts input = 5 amps* continuous, 7 amp peak *Ratings are determined with a 5mph airflow on the BEC Selectable Output: 4.8 - 9.0V via the Castle Link (sold separately) Default voltage is 5.1V

399,-

449,-

-11%

Hovedbilde Traxxas 2428 12T 48P Pinion Gear/Set Screw

Traxxas 2428 12T 48P Pinion Gear/Set Screw

This is the 12T 48P Pinion Gear for the Telluride Off-Road Vehicle from Traxxas FEATURES: Hardened steel construction INCLUDES: 12T 48P Pinion Gear with Set Screw

39,-

Hovedbilde Castle Creations 011011900 Castle Link Programming Kit ...

Castle Creations 011011900 Castle Link Programming Kit ...

This is the Castle Creations Castle Link V3 USB Programming Kit. Compatible with Windows Vista, Windows 7, Windows 8 and Windows 10* FEATURES Simple programming interface for the Castle Creations Phoenix, Talon,Thunderbird, QuadPack, DMR, Mamba, Sidewinder and Hydra controllers as well as accessories like Telemetry Link, and all Castle Creations external switching regulators (BECs) Air users can customize values for low voltage cutoff, prop brakestrength, governor gain and more Suface users can customize values for low-voltage cutoff, drag brake, torque limiting and more Demo mode checks available settings without connecting device to computer Downloadable updates INCLUDES Castle Link V3 USB Programming Kit with Standard USB Cable COMMENTS *Macintosh users may use software such as Parallels Desktop, VMware Fusion, or Apple's Boot Camp along with Windows Vista, Windows 7, Windows 8 and Windows 10 to run the Castle Link software, provided the Macintosh has an Intel processor. Macintosh installation is not supported by Castle Creations.

379,-

439,-

-14%

Hovedbilde Yeah Racing 022 Brass Diff Cover For Axial SCX10 III

Hovedbilde Yeah Racing 022 Brass Diff Cover For Axial SCX10 III

Yeah Racing 022 Brass Diff Cover For Axial SCX10 III

Description: Get more from your tires with this Brass made diff cover by adding weight (41g) exerted onto your tires when compared to the stock plastic items! Easy to remember with etched weight on the side of the knuckle. Feature: For: Axial SCX10 III Material: Brass Color: Brass Include: Diff Cover (1 pc)

329,-

349,-

-6%

Hovedbilde Yeah Racing YT-0163 Super Hard Steel Allen Wrench ...

Hovedbilde Yeah Racing YT-0163 Super Hard Steel Allen Wrench ...

Yeah Racing YT-0163 Super Hard Steel Allen Wrench ...

Yeah Racing Super Hard Steel Allen Wrench Replacement Tip 1.5mm X 120mm 2 pcs for Hudy/EDS/ Handles Description: Yeah Racing Super Hard Steel precision machined replacement tips, size and shape specially measured and manufactured with tight tolerances for the ultimate R/C building experience. Special treatment processes which results in "Super Hard" tips which lengthens the lifetime and reduces chance of stripping screws! Features: For: Hudy/EDS/Yeah Racing Tool Handles Material: Steel Color: Black Includes: Yeah Racing Super Hard Steel Allen Wrench Replacement Tip (2 Pcs)

69,-

Hovedbilde Yeah Racing AXCP-003 Brass Portal Cover 20g 2pcs For ...

Hovedbilde Yeah Racing AXCP-003 Brass Portal Cover 20g 2pcs For ...

Yeah Racing AXCP-003 Brass Portal Cover 20g 2pcs For ...

Brass Portal Cover 20g 2pcs For Axial Capra SCX10 III Coming in at 20g per peice, get more from your tires with this Brass made portal cover by adding weight exerted onto your tires when compared to the stock plastic items! Features: For: Axial Capra SCX10 III Material: Brass Color: Brass Includes: Brass Portal Cover (2 pcs)

235,-

Hovedbilde Yeah Racing Pinion Gear Super Hard Combo set (48P ...

Hovedbilde Yeah Racing Pinion Gear Super Hard Combo set (48P ...

Yeah Racing Pinion Gear Super Hard Combo set (48P ...

Yeah Racing Pinion Gear Super Hard Combo set (48P 15T-20T 6pcs ) Description: The motor gear series including 2 major types of Pitch Pinion - the 48 Pitch Pinion and the 64 Pitch Pinion. The 48 Pitch Pinion available from 15 teeth to 38 teeth. The 64 Pitch Pinion available from 17 teeth to 52 teeth. The Yeah Racing Aluminum Motor Gear are made by 7075 high quality aluminum with titanium coated surface. Feature: For: 1:10 EP, fit on 540 Motor Material: 7075 Aluminum Color: Titanium Specification: Pitch: 48 Teeth: 15~20 3.17mm shaft. Include: 48 Pitch Pinion 15 Teeth (1 Pc) 48 Pitch Pinion 16 Teeth (1 Pc) 48 Pitch Pinion 17 Teeth (1 Pc) 48 Pitch Pinion 18 Teeth (1 Pc) 48 Pitch Pinion 19 Teeth (1 Pc) 48 Pitch Pinion 20 Teeth (1 Pc) Set Screw (6 pcs)

269,-

299,-

-10%

Hovedbilde GT Power XH ADAPTER BOARD

GT Power XH ADAPTER BOARD

XH ADAPTER BOARD Ladebrett for batterier med XH balanseringskontakt. Den mest brukte standarden.

69,-

Hovedbilde Traxxas 8631G Suspension Arms Front Right Green (1+1) ...

Traxxas 8631G Suspension Arms Front Right Green (1+1) ...

Suspension arms, green, front (right), heavy duty (upper (1)/ lower (1))

145,-

Hovedbilde Traxxas 8647X Rod Ends HD (8)

Traxxas 8647X Rod Ends HD (8)

Rod ends, heavy duty (push rod) (8) (assembled with hollow balls) (replacement ends for #8619, 8619G, 8619R, 8619X)

109,-

Hovedbilde Traxxas 5326X Cover Plate Steering Servo

Traxxas 5326X Cover Plate Steering Servo

Cover plate, steering servo/ 3x8 BCS (4)

39,-

Hovedbilde Traxxas 8634G Suspension Arms Rear Left Green (1+1) ...

Traxxas 8634G Suspension Arms Rear Left Green (1+1) ...

Suspension arms, green, rear (left), heavy duty, adjustable wheelbase (upper (1)/ lower (1))

139,-

Hovedbilde Traxxas 8633G Suspension Arms Rear Right Green (1+1) ...

Traxxas 8633G Suspension Arms Rear Right Green (1+1) ...

Suspension arms, green, rear (right), heavy duty, adjustable wheelbase (upper (1)/ lower (1))

145,-

Hovedbilde Traxxas 8632G Suspension Arms Front Left Green (1+1) ...

Traxxas 8632G Suspension Arms Front Left Green (1+1) ...

Suspension arms, green, front (left), heavy duty (upper (1)/ lower (1))

139,-

Hovedbilde Traxxas 8655R Centre Driveshafts Steel Set

Traxxas 8655R Centre Driveshafts Steel Set

Driveshafts, center E-Revo (steel constant-velocity) front (1)/ rear (1) (assembled with inner and outer dust boots, for E-Revo)

749,-

799,-

-6%

Hovedbilde Traxxas 2255 Servo High-Torque 400 29kg Metal gear, ...

Traxxas 2255 Servo High-Torque 400 29kg Metal gear, ...

High-Torque 400 Red Brushless Digital Servo The Traxxas High-Torque 400 Red servo combines maximum steering authority with a long list of high-performance features. The servo utilizes full metal gears, dual ball bearings, and an aluminum center section for added heat dissipation. A cutting edge brushless motor provides 400 ounce-inches of torque for extreme applications.* The High-Torque 400 servo is fully waterproof, not just “water resistant” and drops into most 1/10 Traxxas vehicles for that perfect factory fit. The Power to Perform With over 3 times more torque than the standard #2075 servo, the High-Torque 400 provides noticeably faster turning speed and works great with TSM™ equipped vehicles. Traxxas High-Torque servos are the perfect upgrade for high-demand applications like Unlimited Desert Racer, Slash, Stampede, or almost any 1/10 Traxxas vehicle requiring extreme performance. Replace the E-Revo's dual servos with a single #2255 for lighter weight, more torque, and lightning-quick steering response. Elevate your steering performance to the next level with the High-Torque red 400 servo. High-voltage BEC boosts receiver power for even the most demanding servos. BEC fits inside the extended receiver box for fully waterproof protection. Kit includes BEC, receiver box lid, Y-harness, and mounting hardware. For TRX-4 Installation The Traxxas High-Torque 400 Red servo represents a huge power upgrade for the TRX-4. When installing this servo, it is required that you use the High-Voltage BEC kit #2262 and a steel servo horn #8247X is recommended. Installing the BEC is easy with plug and play simplicity. The kit includes a larger receiver box cover to maintain total waterproof integrity and a Y harness for vehicles with LED light kits. Waterproof Not "Water Resistant" Traxxas knows the difference between “water resistant” and waterproof. Traxxas High-Torque servos are completely waterproof to give you the freedom to run when you want, where you want. Power through streams and bogs without fear while trucks with “water resistant” servos are stuck on the sidelines. HIGH-TORQUE 400 RED FEATURES Factory fit for drop-in installation into Traxxas Models Fully waterproof, not “water resistant” Compatible with Traxxas Stability Management™ (TSM) 400 oz-in torque at 6.0V 0.15 sec/60° at 6.0V Metal gears Dual ball bearings Brushless motor technology Aluminum center case SPECIFICATIONS Motor Type: Brushless Operating Voltage: 6.0 - 7.4V DC Speed: 0.15 sec/60° at 6.0V Torque: 400 oz-in at 6.0V Weight: 64g Gears: Metal Output Spline: 25T Case: Plastic top/bottom, anodized aluminum center Controller: Digital APPLICATION GUIDE Compatible with most Traxxas 1/10 scale electric models* Compatible with TRX-4 models using High-Voltage BEC Kit #2262 and #8247X metal servo horn Compatible with Traxxas nitro models using rechargeable 5-cell battery packs Not recommended for X-Maxx *Does not fit 4-Tec 2.0 models. Minor trimming may be required on 2WD Stampede vehicles.

1.095,-

1.195,-

-8%