Hopp til innhold
Hjem / Radio/Servo/Motor / Motor og regulator / Tilbehør El-motorer / Castle Creations 011011900 Castle Link Programming Kit V3
-14%

Castle Creations 011011900 Castle Link Programming Kit V3

Art.nr: 011-0119-00

379,-

439,-

- 14%
Castle Creations

Castle Creations
** Ikke på lager

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

This is the Castle Creations Castle Link V3 USB Programming Kit.

Compatible with Windows Vista, Windows 7, Windows 8 and Windows 10*

FEATURES

Simple programming interface for the Castle Creations Phoenix, Talon,Thunderbird, QuadPack, DMR, Mamba, Sidewinder and Hydra controllers as well as accessories like Telemetry Link, and all Castle Creations external switching regulators (BECs)

Air users can customize values for low voltage cutoff, prop brakestrength, governor gain and more

Suface users can customize values for low-voltage cutoff, drag brake, torque limiting and more

Demo mode checks available settings without connecting device to computer

Downloadable updates

INCLUDES

Castle Link V3 USB Programming Kit with Standard USB Cable

COMMENTS

*Macintosh users may use software such as Parallels Desktop, VMware Fusion, or Apple's Boot Camp along with Windows Vista, Windows 7, Windows 8 and Windows 10 to run the Castle Link software, provided the Macintosh has an Intel processor.

Macintosh installation is not supported by Castle Creations.

Produsent

Castle Creations

Castle Creations

Castle Creations makes the best electronic speed controllers in the industry, possibly the world!  Our engineers have spent countless hours integrating features and firmware that no other manufacturers can match.

Speed Controllers enabled with SmartSense use the motor’s sensors to provide smooth starts, excellent torque, and low-speed drivability. Once the motor is turning, it seamlessly transitions to Castle’s ULTRA-EFFICIENT sensorless mode with electronic timing. When running, a motor must transition between different load points and a different timing advance is required for optimal efficiency at each. Electronic timing in SMARTSENSE™ will advance timing automatically for peak performance during all driving conditions. This combines the best of both worlds in an unrivaled HYBRID between smooth sensored startups and high-efficiency sensorless running. Your motor will produce more power and less heat.

Relaterte produkter

 

Hovedbilde Castle Creations 1/10 Neu-Castle 7700kV Brushless ...
Castle Creations 1/10 Neu-Castle 7700kV Brushless ...
Art.nr: 060-0003-00
Copied
This is the Castle Creations 1406 Series 7700kV                    Sensorless Brushless Motor for cars. FEATURES: Ideal for 1/10 scale buggies and trucks 1.4 inch diameter slotted stator Four neodymium rotor magnet Removable endbell 540 size can replaces many stock Brushed motors Four pole motor INCLUDES: Castle Creations 1406 Series Sensorless brushless motor REQUIRES: ESC for brushless motor SPECS: Can Length: 1.9" (49.mm) Can Diameter: 1.4" (36mm) Weight: 6.5oz (185g) Shaft Diameter: 1/8" (3.2mm) Connector: 4mm gold Wire Length: 4.5mm kV rating: 7700kV Input Voltage: 8NiMH/2S LiPo max

990,-

KJØP
Hovedbilde Castle Creations 1/10 Neu-Castle 6900kV Brushless ...
Castle Creations 1/10 Neu-Castle 6900kV Brushless ...
Art.nr: 060-0002-00
Copied
This is the Castle Creations 1406 Series 6900kV Sensorless Brushless Motor. FEATURES: Ideal for 1/10 scale 2WD and 4WD buggies and trucks that weight 5lbs (2268g) or less 1.4 inch diameter slotted stator Four neodymium rotor magnet Removable endbell 540 size can replaces many stock Brushed motors Four pole motor INCLUDES: Castle Creations 1406 Series Sensorless Brushless Motor REQUIRES: ESC for brushless motor SPECS: Can Length: 1.9" (49.mm) Can Diameter: 1.4" (36mm) Weight: 6.5oz (185g) Shaft Diameter: 1/8" (3.2mm) Connector: 4mm gold Wire Length: 9.5" (241mm) kV rating: 6900kV Input Voltage: 8NiMH/2S LiPo max

1.199,-

KJØP
Hovedbilde Castle Creations Crawler 4-Pole Sensored BL SLate ... Hovedbilde Castle Creations Crawler 4-Pole Sensored BL SLate ...
Castle Creations Crawler 4-Pole Sensored BL SLate ...
Art.nr: 060-0068-00
Copied
This is the Castle Creations 1406 4-Pole 1900Kv Sensored Brushless Motor.       FEATURES For 1/10 scale rock crawlers using 2-4S LiPo batteries and weighing  less than 8lbs (3.6kg), may also be used in more aggressive  setups in lighter 1/10 scale touring cars, stadium trucks or  buggies weighing up to 5lbs (2.3kg)  4 pole 12 slot design for high degree of efficiency and less heat  SMARTSENSE uses motor's sensors to provide smooth starts, excellent  torque and low-speed drivability-once motor is turning it  transitions to sensorless mode  ROAR standard sensor port and labeled connections  High performance 0.2mm steel lamination stacked stator  CNC machined anodized 6061 T-6 aluminum motor can and endbells  Rebuildable design allows replacement of front end bell/bearing  assembly or rotor/shaft assembly     INCLUDES 1406 4-Pole 1900Kv Sensored Brushless Crawler Motor     REQUIREMENTS Electronic Speed Control such as the Castle Creations Mamba Micro X,  Mamba Max Pro, Mamba X or Mamba Monster X     SPECIFICATIONS  Input Voltage Range: 3-4S LiPo  Kv: 1900  Max RPM: 100,000  Length: 1.9" (49.5mm)  Diameter: 1.4" (36mm)  Weight: 6.9oz (197g)  Shaft Length: 0.59" (15mm)  Shaft Diameter: 1.8" (3.17mm)  Mounting Hole Specs: M3 @ 25mm  Connectors: 4mm Male Castle Bullet Connectors attached to 13 gauge  wire  Sensor Wire Length: 8.3" (210mm)

1.395,-

1.495,-

KJØP
-7%
Hovedbilde Castle Creations Crawler 4-Pole Sensored BL Slate ... Hovedbilde Castle Creations Crawler 4-Pole Sensored BL Slate ...
Castle Creations Crawler 4-Pole Sensored BL Slate ...
Art.nr: 060-0069-00
Copied
This is the Castle Creations 1406-2280Kv Brushless Sensored Motor.       FEATURES Ideal for 1/10 scale rock crawlers, trail rigs, touring cars, stadium  trucks and buggies powered by 2-4S LiPo batteries with appropriate  gearing  ROAR standard sensor port and labeled connections  SMARTSENSE uses sensors to provide smooth starts, excellent torque  and low speed driveability  CNC machined 6061-T6 aluminum can, slate gray in color  High performance 0.2mm steel lamination stacked stator  High strength 180°C grade neodymium sintered magnets with Kevlar wrap  Oversize NMB grade ball bearings  Rebuildable     INCLUDES 1406-2280Kv Brushless Sensored Motor with Sensor Wire  Three 4mm Female Castle Bullet Connectors     REQUIREMENTS ESC such as the Castle Creations Mamba Max Pro, Mamba X and Mamba  Micro X     SPECIFICATIONS  Input Voltage Range: 2-4S LiPo  Kv Rating: 2280  Max RPM: 100.000  Can Length: 1.9" (49.5mm)  Can Diameter: 1.4" (36mm)  Weight: 6.9oz (197g) with wires  Shaft Diameter: 1/8" (3.17mm)  Shaft Length: 0.59" (15mm)  Mounting Hole Specifications: M3 @ 25mm  Wire Lead: Castle 13 AWG silicone insulated wire  Connectors: 4mm male Castle Bullet Connectors

1.395,-

1.495,-

KJØP
-7%
Hovedbilde Castle Creations Crawler 4-Pole Sensored BL Slate ... Hovedbilde Castle Creations Crawler 4-Pole Sensored BL Slate ...
Castle Creations Crawler 4-Pole Sensored BL Slate ...
Art.nr: 060-0070-00
Copied
This is the Castle Creations 1406-2850Kv Brushless Sensored Motor.       FEATURES Ideal for 1/10 scale rock crawlers, trail rigs, touring cars, stadium  trucks and buggies powered by 2-4S LiPo batteries with appropriate  gearing  ROAR standard sensor port and labeled connections  SMARTSENSE uses sensors to provide smooth starts, excellent torque  and low speed driveability  CNC machined 6061-T6 aluminum can, slate gray in color  High performance 0.2mm steel lamination stacked stator  High strength 180°C grade neodymium sintered magnets with Kevlar wrap  Oversize NMB grade ball bearings  Rebuildable     INCLUDES 1406-2850Kv Brushless Sensored Motor with Sensor Wire  Three 4mm Female Castle Bullet Connectors     REQUIREMENTS ESC such as the Castle Creations Mamba Max Pro, Mamba X and Mamba  Micro X     SPECIFICATIONS  Input Voltage Range: 2-4S LiPo  Kv Rating: 2850  Max RPM: 100.000  Can Length: 1.9" (49.5mm)  Can Diameter: 1.4" (36mm)  Weight: 6.9oz (197g) with wires  Shaft Diameter: 1/8" (3.17mm)  Shaft Length: 0.59" (15mm)  Mounting Hole Specifications: M3 @ 25mm  Wire Lead: Castle 13 AWG silicone insulated wire  Connectors: 4mm male Castle Bullet Connectors

1.395,-

1.495,-

KJØP
-7%
Hovedbilde Castle Creations 3800kv Crawler Motor Sensor 4-pole ... Hovedbilde Castle Creations 3800kv Crawler Motor Sensor 4-pole ...
Castle Creations 3800kv Crawler Motor Sensor 4-pole ...
Art.nr: 060-0071-00
Copied
Castle 1406 Sensored Motor - 3800KV Castle Creation crawler motor 1900KV, 2280KV, 2850KV and 3800KV. You asked. We listened. For more than a decade Castle has been providing award winning brushless sensorless motors to R/C enthusiasts worldwide. In response to overwhelming requests by our customers, we have brought technological advancements together that will deliver unprecedented performance in our new SENSORED motor Line. Our latest additions are the 1406 series in a "SLATE" color, in 1900KV, 2280KV, 2850KV and 3800KV. These motors are ROCK READY and we have the startup on low RPMs under control. Castle now has you covered if you are looking for ultimate control out on the trails or on your Ultra 4 track days.   Minimum Input Voltage : 2S Maximum Input Voltage : 4S Sensored Capable : Yes   WHY SENSORED? Drivers in all applications demand clean starts when coming off the line. Crawler fans require high-precision low speed control and torque for climbing, racers need precision and predictability, and dragsters don’t have a millisecond to spare. To achieve all of these performance demands and more, we have integrated rotor position sensor technology with our improved high power and high efficiency motor design. Through the use of our sensors, the position of the rotor is always known by the ESC. This eliminates the possibility of encountering cogging or inconsistency during startup. Users will experience PRECISE throttle control and BUTTERY SMOOTH starts plus the RAW POWER and LONGER RUN TIMES that our highly efficient motors produce. WHAT MAKES AN EXCEPTIONAL MOTOR? When tasked with designing a sensored motor our engineers started with the question; What makes a motor great? Efficiency: You can push it harder (gear it up) You can run it longer (with the same battery) It stays cool under extreme loads Reliability: Ability to withstand the harsh demands of any RC application Long-life, high-quality components Proven manufacturing techniques EFFICIENCY IS KEY The higher the efficiency of a motor the more power it can produce without overheating, which allows you to safely run higher gear ratios. The higher the efficiency of a motor, the less power it takes to produce the same output power, which allows you to run longer on a single charge. The higher the efficiency of the motor, the less energy it turns into heat; keeping it cool under extreme loads. Efficiency equals performance.   RELIABILITY CAN’T BE IGNORED Without a robust and reliable design, efficiency will only go so far. RC enthusiasts love pushing their equipment to the edge. The Castle engineers know this and spared no expense when developing a design that could hold up to the harsh conditions that the RC community will throw at it. Oversized NMB bearings and vibration dampening system ensure the longest bearing life possible. High-strength, high-temperature grade neodymium sintered magnets combined with a high-strength Kevlar wrap ensures the integrity of the rotor is not compromised during harsh running conditions. Our proprietary winding techniques allow us to produce a stator assembly that is the lowest possible resistance, resulting in a cooler running motor. A cooler motor has a longer lifetime. Construction of our motor required careful component selection; each verified through internal testing to ensure the highest efficiency possible. In the end, the result is a motor with unmatched quality, performance, and reliability. We wouldn’t put our name on anything less.   THE DESIGN: KEEPING IT COOL   Our IMPROVED 4-POLE 12-SLOT design boasts exceptional EFFICIENCY and produces LESS HEAT. QUIETSENSE™ technology shields the sensors from magnetic field noise generated from the motor coils and keeps your motor and ESC in sync at all times. Use of a Flux Shield™ in conjunction with secondary Sense Magnets delivers even HIGHER PRECISION and MORE EFFICIENT startups. Our OPTIMIZED design eliminates the need for mechanical timing adjustments. Our sensor alignment method delivers uniform timing and torque in both directions, automatically. REBUILDABLE design allows users to replace front end bell/bearing assembly or rotor/shaft assembly. ROAR standard sensor port and labeled connections. Updated modern and sleek design; looks as cool as it performs. Immense care is taken by our US design team during every step of the development process. While using the highest quality components is important, design is equally important. Our experienced, in-house engineering team, located in Olathe, Kansas, has spent countless hours simulating and developing the most efficient design. Development includes magnetic simulations, custom winding techniques, and rigorous, real-world testing of the final product. You will reap the benefits of longer run times on one battery and a cooler running motor that can be pushed harder. We take OVERPOWERING seriously. INTEGRATED SOPHISTICATION Castle engineers always add a little something extra in their designs that takes your performance to the next level. We have not skimped here. Many customers have utilized our industry leading software functionality that Castle Link* offers. When paired with a Castle Creations sensor supported ESC, like the MAMBA MICRO X, MAMBA MAX PRO or MAMBA MONSTER X, you can unlock advanced tuning capabilities that Castle Link provides specifically for sensored motors. SMARTSENSE™ uses the motors sensors to start the motor to provide smooth starts, excellent torque, and low-speed drivability. Once the motor is turning, it seamlessly transitions to Castle’s ULTRA- EFFICIENT sensorless mode. When running, a motor must transition between different load points and a different timing advance is required for optimal efficiency at all load points. Using mechanical timing adjustments alone, you can only target one driving condition, such as higher start power or higher top end speed. This sacrifices performance and efficiency during the other driving phases. Electronic timing in SMARTSENSE™ will advance timing automatically for peak performance during all driving conditions. This allows users to combine the best of both worlds in an unrivaled HYBRID between smooth sensored startups and high-efficiency sensorless drive. With a Castle sensored ESC and sensored motor you will have the ULTIMATE POWER PLANT for your vehicle. Users will experience PRECISE throttle control, BUTTERY SMOOTH starts, PEAK PERFORMANCE and EFFICIENCY throughout the full throttle range. You will feel the POWER and LONGER RUN TIMES that a WORLD-CLASS motor produces. It’s not magic… it’s SMARTSENSE™. Technical Specs: Input Voltage Range: 2-4S LiPo Kv: 3800 Max. RPM: 100,000 Length: 49.5 mm Diameter: 36 mm Weight (w/wires): 197 g Shaft Length: 15 mm Shaft Diameter: 1/8" (3.17 mm) Mounting Hole Specifications: M3 @ 25 mm spacing Cooling Fan: Optional - Coming Soon Connectors: 4 mm male Castle Bullet Connectors Items Needed for Operation: Compatible Electronic Speed Control (ESC) Application Guidelines: Ideal for 1/10 scale rock crawlers & trail rigs on 2S-4S and low speed setups on 1/10 scale touring cars, stadium trucks or buggies on 2-4S with apropriate gearing. Recommended ESC(s): Mamba Max Pro, Mamba X & Mamba Micro X Tech Notes: Running modes: SMARTSENSE™, Sensored, Sensorless with Castle capaple ESC's

1.395,-

1.495,-

KJØP
-7%
Hovedbilde Castle Creations Motor 4-Pole Sensored BL 1512-1800KV Hovedbilde Castle Creations Motor 4-Pole Sensored BL 1512-1800KV
Castle Creations Motor 4-Pole Sensored BL 1512-1800KV
Art.nr: 060-0062-00
Copied
This is the Castle Creations 1512 1.5Y 1800Kv Sensored Brushless Motor.     FEATURES Ideal for 1/8 scale off-road and on-road vehicles, and 1/10 scale 4WD short course trucks up to 9lbs (4082g) High strength neodymium sintered magnets with high strength Kevlar wrap High performance 0.2mm steel laminated stacked stator Four pole configuration for maximum efficiency at high RPM Vibration dampening wave spring High-temperature, high purity copper windings CNC machined 6061-T6 anodized aluminum can and endbells Hardened stainless steel shaft Low resistance gold-plated solder tabs 10AWG high strand count insulated wire with 6.5mm femal bullet connectors Sensor board with temperature stabilized sensors     INCLUDES 1512 1.5Y 1800Kv Sensored Brushless Motor Sensor Wire Three 6.5mm Female Connectors     REQUIREMENTS Electronic Speed Control such as the Castle Creations Mamba Monster X, CSEM0800     SPECIFICATIONS Input Voltage Range: 3-4S LiPo Kv: 1800 Max. RPM: 60,000 Max. Recommended Vehicle Weight: 9lbs (4082g) with battery RTR Length: 2.7" (67.7mm) Diameter: 1.6" (41.4mm) with fins Weight with Wires: 13.6oz (385g) Shaft Diameter: 0.196" (5mm) Shaft Length: 0.79" (20mm) Mounting Hole Specifications: M3 and M4 @ 25mm Connectors: 6.5mm Male Castle Bullet

2.495,-

2.895,-

KJØP
-14%
Hovedbilde Castle Creations Motor Sensor Inrunner 4-Pole ... Hovedbilde Castle Creations Motor Sensor Inrunner 4-Pole ...
Castle Creations Motor Sensor Inrunner 4-Pole ...
Art.nr: CC060-0067-00
Copied
  Castle 1415 1Y Sensored Motor - 2400KV - 5 mm Shaft You asked. We listened. For more than a decade Castle has been providing award winning brushless sensorless motors to R/C enthusiasts worldwide. In response to overwhelming requests by our customers, we have brought technological advancements together that will deliver unprecedented performance in our new SENSORED motor Line.   Minimum Input Voltage: 3S Maximum Input Voltage: 4S Sensored Capable : Yes   WHY SENSORED? Drivers in all applications demand clean starts when coming off the line. Crawler fans require high-precision low speed control and torque for climbing, racers need precision and predictability, and dragsters don’t have a millisecond to spare. To achieve all of these performance demands and more, we have integrated rotor position sensor technology with our improved high power and high efficiency motor design. Through the use of our sensors, the position of the rotor is always known by the ESC. This eliminates the possibility of encountering cogging or inconsistency during startup. Users will experience PRECISE throttle control and BUTTERY SMOOTH starts plus the RAW POWER and LONGER RUN TIMES that our highly efficient motors produce.   WHAT MAKES AN EXCEPTIONAL MOTOR? When tasked with designing a sensored motor our engineers started with the question; What makes a motor great? Efficiency: You can push it harder (gear it up) You can run it longer (with the same battery) It stays cool under extreme loads Reliability: Ability to withstand the harsh demands of any RC application Long-life, high-quality components Proven manufacturing techniques EFFICIENCY IS KEY The higher the efficiency of a motor the more power it can produce without overheating, which allows you to safely run higher gear ratios. The higher the efficiency of a motor, the less power it takes to produce the same output power, which allows you to run longer on a single charge. The higher the efficiency of the motor, the less energy it turns into heat; keeping it cool under extreme loads. Efficiency equals performance.   RELIABILITY CAN’T BE IGNORED Without a robust and reliable design, efficiency will only go so far. RC enthusiasts love pushing their equipment to the edge. The Castle engineers know this and spared no expense when developing a design that could hold up to the harsh conditions that the RC community will throw at it. Oversized NMB bearings and vibration dampening system ensure the longest bearing life possible. High-strength, high-temperature grade neodymium sintered magnets combined with a high-strength Kevlar wrap ensures the integrity of the rotor is not compromised during harsh running conditions. Our proprietary winding techniques allow us to produce a stator assembly that is the lowest possible resistance, resulting in a cooler running motor. A cooler motor has a longer lifetime. Construction of our motor required careful component selection; each verified through internal testing to ensure the highest efficiency possible. In the end, the result is a motor with unmatched quality, performance, and reliability. We wouldn’t put our name on anything less.   THE DESIGN: KEEPING IT COOL   Our IMPROVED 4-POLE 12-SLOT design boasts exceptional EFFICIENCY and produces LESS HEAT. QUIETSENSE™ technology shields the sensors from magnetic field noise generated from the motor coils and keeps your motor and ESC in sync at all times. Use of a Flux Shield™ in conjunction with secondary Sense Magnets delivers even HIGHER PRECISION and MORE EFFICIENT startups. Our OPTIMIZED design eliminates the need for mechanical timing adjustments. Our sensor alignment method delivers uniform timing and torque in both directions, automatically. REBUILDABLE design allows users to replace front end bell/bearing assembly or rotor/shaft assembly. ROAR standard sensor port and labeled connections. Updated modern and sleek design; looks as cool as it performs. Immense care is taken by our US design team during every step of the development process. While using the highest quality components is important, design is equally important. Our experienced, in-house engineering team, located in Olathe, Kansas, has spent countless hours simulating and developing the most efficient design. Development includes magnetic simulations, custom winding techniques, and rigorous, real-world testing of the final product. You will reap the benefits of longer run times on one battery and a cooler running motor that can be pushed harder. We take OVERPOWERING seriously. INTEGRATED SOPHISTICATION Castle engineers always add a little something extra in their designs that takes your performance to the next level. We have not skimped here. Many customers have utilized our industry leading software functionality that Castle Link* offers. When paired with a Castle Creations sensor supported ESC, like the MAMBA MICRO X, MAMBA MAX PRO or MAMBA MONSTER X, you can unlock advanced tuning capabilities that Castle Link provides specifically for sensored motors. SMARTSENSE™ uses the motors sensors to start the motor to provide smooth starts, excellent torque, and low-speed drivability. Once the motor is turning, it seamlessly transitions to Castle’s ULTRA- EFFICIENT sensorless mode. When running, a motor must transition between different load points and a different timing advance is required for optimal efficiency at all load points. Using mechanical timing adjustments alone, you can only target one driving condition, such as higher start power or higher top end speed. This sacrifices performance and efficiency during the other driving phases. Electronic timing in SMARTSENSE™ will advance timing automatically for peak performance during all driving conditions. This allows users to combine the best of both worlds in an unrivaled HYBRID between smooth sensored startups and high-efficiency sensorless drive. With a Castle sensored ESC and sensored motor you will have the ULTIMATE POWER PLANT for your vehicle. Users will experience PRECISE throttle control, BUTTERY SMOOTH starts, PEAK PERFORMANCE and EFFICIENCY throughout the full throttle range. You will feel the POWER and LONGER RUN TIMES that a WORLD-CLASS motor produces. It’s not magic… it’s SMARTSENSE™. Technical Specs: Input Voltage Range: 3-4S LiPo Kv: 2400 Max. RPM: 75.000 Length: 69.5 mm Diameter: 36 mm Weight (w/wires): 319 g Shaft Length: 21 mm Shaft Diameter: 5 mm Mounting Hole Specifications: M3 @ 25 mm spacing Cooling Fan: Optional - Coming Soon Connectors: 4 mm male Castle Bullet Connectors Items Needed for Operation: Compatible Electronic Speed Control (ESC) Application Guidelines: Ideal for 1:10 scale 2WD and 4WD short course trucks up to 2.9 kg (3S-4S) Recommended ESC(s): Mamba Max Pro Max. Recommended Vehicle Weight: See application guidelines Tech Notes: Running modes: SMARTSENSE™, Sensored, Sensorless Comparable Turn Count: Turn count equivalent charts coming soon!

1.390,-

KJØP
Hovedbilde Castle Creations Motor Sensor Inrunner 4-Pole ... Hovedbilde Castle Creations Motor Sensor Inrunner 4-Pole ...
Castle Creations Motor Sensor Inrunner 4-Pole ...
Art.nr: CC060-0060-00
Copied
  Castle 1415 1YSensored Motor - 2400KV You asked. We listened. For more than a decade Castle has been providing award winning brushless sensorless motors to R/C enthusiasts worldwide. In response to overwhelming requests by our customers, we have brought technological advancements together that will deliver unprecedented performance in our new SENSORED motor Line.   Minimum Input Voltage : 3S Maximum Input Voltage : 4S Sensored Capable : Yes   WHY SENSORED? Drivers in all applications demand clean starts when coming off the line. Crawler fans require high-precision low speed control and torque for climbing, racers need precision and predictability, and dragsters don’t have a millisecond to spare. To achieve all of these performance demands and more, we have integrated rotor position sensor technology with our improved high power and high efficiency motor design. Through the use of our sensors, the position of the rotor is always known by the ESC. This eliminates the possibility of encountering cogging or inconsistency during startup. Users will experience PRECISE throttle control and BUTTERY SMOOTH starts plus the RAW POWER and LONGER RUN TIMES that our highly efficient motors produce.   WHAT MAKES AN EXCEPTIONAL MOTOR? When tasked with designing a sensored motor our engineers started with the question; What makes a motor great? Efficiency: You can push it harder (gear it up) You can run it longer (with the same battery) It stays cool under extreme loads Reliability: Ability to withstand the harsh demands of any RC application Long-life, high-quality components Proven manufacturing techniques EFFICIENCY IS KEY The higher the efficiency of a motor the more power it can produce without overheating, which allows you to safely run higher gear ratios. The higher the efficiency of a motor, the less power it takes to produce the same output power, which allows you to run longer on a single charge. The higher the efficiency of the motor, the less energy it turns into heat; keeping it cool under extreme loads. Efficiency equals performance.   RELIABILITY CAN’T BE IGNORED Without a robust and reliable design, efficiency will only go so far. RC enthusiasts love pushing their equipment to the edge. The Castle engineers know this and spared no expense when developing a design that could hold up to the harsh conditions that the RC community will throw at it. Oversized NMB bearings and vibration dampening system ensure the longest bearing life possible. High-strength, high-temperature grade neodymium sintered magnets combined with a high-strength Kevlar wrap ensures the integrity of the rotor is not compromised during harsh running conditions. Our proprietary winding techniques allow us to produce a stator assembly that is the lowest possible resistance, resulting in a cooler running motor. A cooler motor has a longer lifetime. Construction of our motor required careful component selection; each verified through internal testing to ensure the highest efficiency possible. In the end, the result is a motor with unmatched quality, performance, and reliability. We wouldn’t put our name on anything less.   THE DESIGN: KEEPING IT COOL   Our IMPROVED 4-POLE 12-SLOT design boasts exceptional EFFICIENCY and produces LESS HEAT. QUIETSENSE™ technology shields the sensors from magnetic field noise generated from the motor coils and keeps your motor and ESC in sync at all times. Use of a Flux Shield™ in conjunction with secondary Sense Magnets delivers even HIGHER PRECISION and MORE EFFICIENT startups. Our OPTIMIZED design eliminates the need for mechanical timing adjustments. Our sensor alignment method delivers uniform timing and torque in both directions, automatically. REBUILDABLE design allows users to replace front end bell/bearing assembly or rotor/shaft assembly. ROAR standard sensor port and labeled connections. Updated modern and sleek design; looks as cool as it performs. Immense care is taken by our US design team during every step of the development process. While using the highest quality components is important, design is equally important. Our experienced, in-house engineering team, located in Olathe, Kansas, has spent countless hours simulating and developing the most efficient design. Development includes magnetic simulations, custom winding techniques, and rigorous, real-world testing of the final product. You will reap the benefits of longer run times on one battery and a cooler running motor that can be pushed harder. We take OVERPOWERING seriously. INTEGRATED SOPHISTICATION Castle engineers always add a little something extra in their designs that takes your performance to the next level. We have not skimped here. Many customers have utilized our industry leading software functionality that Castle Link* offers. When paired with a Castle Creations sensor supported ESC, like the MAMBA MICRO X, MAMBA MAX PRO or MAMBA MONSTER X, you can unlock advanced tuning capabilities that Castle Link provides specifically for sensored motors. SMARTSENSE™ uses the motors sensors to start the motor to provide smooth starts, excellent torque, and low-speed drivability. Once the motor is turning, it seamlessly transitions to Castle’s ULTRA- EFFICIENT sensorless mode. When running, a motor must transition between different load points and a different timing advance is required for optimal efficiency at all load points. Using mechanical timing adjustments alone, you can only target one driving condition, such as higher start power or higher top end speed. This sacrifices performance and efficiency during the other driving phases. Electronic timing in SMARTSENSE™ will advance timing automatically for peak performance during all driving conditions. This allows users to combine the best of both worlds in an unrivaled HYBRID between smooth sensored startups and high-efficiency sensorless drive. With a Castle sensored ESC and sensored motor you will have the ULTIMATE POWER PLANT for your vehicle. Users will experience PRECISE throttle control, BUTTERY SMOOTH starts, PEAK PERFORMANCE and EFFICIENCY throughout the full throttle range. You will feel the POWER and LONGER RUN TIMES that a WORLD-CLASS motor produces. It’s not magic… it’s SMARTSENSE™. Technical Specs: Input Voltage Range: 3-4S LiPo Kv: 2600 Max. RPM: 100,000 Length: 69.5 mm Diameter: 36 mm Weight (w/wires): 318 g Shaft Length: 15.5 mm Shaft Diameter: 1/8" (3.17 mm) Mounting Hole Specifications: M3 @ 25 mm spacing Cooling Fan: Optional - Coming Soon Connectors: 4 mm male Castle Bullet Connectors Items Needed for Operation: Compatible Electronic Speed Control (ESC) Application Guidelines: Ideal for 1:10 scale 2WD and 4WD short course trucks up to 2.95 kg (3S-4S) Recommended ESC(s): Mamba Max Pro & Mamba Monster X Max. Recommended Vehicle Weight: See application guidelines Tech Notes: Running modes: SMARTSENSE™, Sensored, Sensorless Comparable Turn Count: Turn count equivalent charts coming soon!

1.895,-

KJØP
Hovedbilde Castle Creations 5mm 4-Pole Sensored BL 1410-3800kV Hovedbilde Castle Creations 5mm 4-Pole Sensored BL 1410-3800kV
Castle Creations 5mm 4-Pole Sensored BL 1410-3800kV
Art.nr: 060-0066-00
Copied
  This is the Castle 1410 1Y 3800Kv 4-Pole Sensored Brushless Motor with 0.197" (5mm) Diameter Shaft.       FEATURES Ideal for 1/10 scale 2WD and 4WD short course trucks up to 6.5lbs using a 2S LiPo, and 1/10 scale buggies and stadium trucks up to 4lbs using a 2-3S LiPo High-strength 180°C grade neodymium sintered magnets with high- strength wrap High-temperature, high purity copper windings High-performance 0.2mm steel lamination stacked stator Vibration dampening wave spring on shaft Rotor position sensor eliminates cogging and inconsistency during startup CNC machined 6061 T-6 aluminum endbells and motor can 13AWG high strand count silicone insulated wires with 4mm male bullet connectors Four pole configuration for maximum efficiency at high RPM ROAR standard sensor port and labeled connections Replaceable front end bell/bearing assembly and rotor/shaft assembly     INCLUDES 1410 1Y 3800Kv 4-Pole Sensored Brushless Motor, Sensor Wire, Power Leads with 4mm Male and Female Castle Bullet Connectors and three 3x5mm Socket Head Cap Screws     REQUIREMENTS Compatible electronic speed control such as the Castle Mamba Max Pro, Mamba Monster X and Mamba X     SPECIFICATIONS Input Voltage Range: 2-3S LiPo Kv: 3800 Max RPM: 100,000 Length: 2.1" (52.7mm) Diameter: 1.4" (36mm) Shaft Diameter: 0.197" (5mm) Shaft Length: 0.83" (21mm) Weight: 8.4oz (237g) Mounting Hole Size: M3 @ 25mm

1.595,-

1.895,-

KJØP
-16%
Hovedbilde Castle Creation Motor Sensor Inrunner 4-Pole ... Hovedbilde Castle Creation Motor Sensor Inrunner 4-Pole ...
Castle Creation Motor Sensor Inrunner 4-Pole ...
Art.nr: 060-0061-00
Copied
Castle 1512 1Y Sensored Motor - 2650KV You asked. We listened. For more than a decade Castle has been providing award winning brushless sensorless motors to R/C enthusiasts worldwide. In response to overwhelming requests by our customers, we have brought technological advancements together that will deliver unprecedented performance in our new SENSORED motor Line.   Minimum Input Voltage : 3S Maximum Input Voltage : 4S Sensored Capable : Yes   WHY SENSORED? Drivers in all applications demand clean starts when coming off the line. Crawler fans require high-precision low speed control and torque for climbing, racers need precision and predictability, and dragsters don’t have a millisecond to spare. To achieve all of these performance demands and more, we have integrated rotor position sensor technology with our improved high power and high efficiency motor design. Through the use of our sensors, the position of the rotor is always known by the ESC. This eliminates the possibility of encountering cogging or inconsistency during startup. Users will experience PRECISE throttle control and BUTTERY SMOOTH starts plus the RAW POWER and LONGER RUN TIMES that our highly efficient motors produce.   WHAT MAKES AN EXCEPTIONAL MOTOR? When tasked with designing a sensored motor our engineers started with the question; What makes a motor great? Efficiency: You can push it harder (gear it up) You can run it longer (with the same battery) It stays cool under extreme loads Reliability: Ability to withstand the harsh demands of any RC application Long-life, high-quality components Proven manufacturing techniques EFFICIENCY IS KEY The higher the efficiency of a motor the more power it can produce without overheating, which allows you to safely run higher gear ratios. The higher the efficiency of a motor, the less power it takes to produce the same output power, which allows you to run longer on a single charge. The higher the efficiency of the motor, the less energy it turns into heat; keeping it cool under extreme loads. Efficiency equals performance.   RELIABILITY CAN’T BE IGNORED Without a robust and reliable design, efficiency will only go so far. RC enthusiasts love pushing their equipment to the edge. The Castle engineers know this and spared no expense when developing a design that could hold up to the harsh conditions that the RC community will throw at it. Oversized NMB bearings and vibration dampening system ensure the longest bearing life possible. High-strength, high-temperature grade neodymium sintered magnets combined with a high-strength Kevlar wrap ensures the integrity of the rotor is not compromised during harsh running conditions. Our proprietary winding techniques allow us to produce a stator assembly that is the lowest possible resistance, resulting in a cooler running motor. A cooler motor has a longer lifetime. Construction of our motor required careful component selection; each verified through internal testing to ensure the highest efficiency possible. In the end, the result is a motor with unmatched quality, performance, and reliability. We wouldn’t put our name on anything less.   THE DESIGN: KEEPING IT COOL   Our IMPROVED 4-POLE 12-SLOT design boasts exceptional EFFICIENCY and produces LESS HEAT. QUIETSENSE™ technology shields the sensors from magnetic field noise generated from the motor coils and keeps your motor and ESC in sync at all times. Use of a Flux Shield™ in conjunction with secondary Sense Magnets delivers even HIGHER PRECISION and MORE EFFICIENT startups. Our OPTIMIZED design eliminates the need for mechanical timing adjustments. Our sensor alignment method delivers uniform timing and torque in both directions, automatically. REBUILDABLE design allows users to replace front end bell/bearing assembly or rotor/shaft assembly. ROAR standard sensor port and labeled connections. Updated modern and sleek design; looks as cool as it performs. Immense care is taken by our US design team during every step of the development process. While using the highest quality components is important, design is equally important. Our experienced, in-house engineering team, located in Olathe, Kansas, has spent countless hours simulating and developing the most efficient design. Development includes magnetic simulations, custom winding techniques, and rigorous, real-world testing of the final product. You will reap the benefits of longer run times on one battery and a cooler running motor that can be pushed harder. We take OVERPOWERING seriously. INTEGRATED SOPHISTICATION Castle engineers always add a little something extra in their designs that takes your performance to the next level. We have not skimped here. Many customers have utilized our industry leading software functionality that Castle Link* offers. When paired with a Castle Creations sensor supported ESC, like the MAMBA MICRO X, MAMBA MAX PRO or MAMBA MONSTER X, you can unlock advanced tuning capabilities that Castle Link provides specifically for sensored motors. SMARTSENSE™ uses the motors sensors to start the motor to provide smooth starts, excellent torque, and low-speed drivability. Once the motor is turning, it seamlessly transitions to Castle’s ULTRA- EFFICIENT sensorless mode. When running, a motor must transition between different load points and a different timing advance is required for optimal efficiency at all load points. Using mechanical timing adjustments alone, you can only target one driving condition, such as higher start power or higher top end speed. This sacrifices performance and efficiency during the other driving phases. Electronic timing in SMARTSENSE™ will advance timing automatically for peak performance during all driving conditions. This allows users to combine the best of both worlds in an unrivaled HYBRID between smooth sensored startups and high-efficiency sensorless drive. With a Castle sensored ESC and sensored motor you will have the ULTIMATE POWER PLANT for your vehicle. Users will experience PRECISE throttle control, BUTTERY SMOOTH starts, PEAK PERFORMANCE and EFFICIENCY throughout the full throttle range. You will feel the POWER and LONGER RUN TIMES that a WORLD-CLASS motor produces. It’s not magic… it’s SMARTSENSE™. Technical Specs: Input Voltage Range: 3-4S LiPo Kv: 2650 Max. RPM: 60,000 Length: 67.7 mm Diameter: 40 mm Weight (w/wires): 383 g Shaft Length: 20 mm Shaft Diameter: 5 mm Mounting Hole Specifications: M3 & M4 @ 25 mm spacing Cooling Fan: Optional - Coming Soon Connectors: 6.5 mm male Castle Bullet Connectors Items Needed for Operation: Compatible Electronic Speed Control (ESC) Application Guidelines: Ideal for 1:8 scale off-road and on-road vehicles as well as 1:10 scale 4WD SCT up to 4 kg Recommended ESC(s): Mamba Monster X Max. Recommended Vehicle Weight: See application guidelines Tech Notes: Running modes: SMARTSENSE™, Sensored, Sensorless Comparable Turn Count: Turn count equivalent charts coming soon!

2.190,-

KJØP
Hovedbilde Castle Creation Motor Sensored Inrunner 4-pole ... Hovedbilde Castle Creation Motor Sensored Inrunner 4-pole ...
Castle Creation Motor Sensored Inrunner 4-pole ...
Art.nr: CC060-0064-00
Copied
Castle 2028 1Y Sensored Brushless Motor - 800Kv We take OVERPOWERING seriously. FEATURES: Minimum Input Voltage : 3S Maximum Input Voltage : 12S Sensored Capable : Yes Running modes include Sensored and an ULTRA-EFFICIENT sensorless mode. High-strength, high-temperature grade neodymium sintered magnets combined with High-strength Kevlar wrap ensures the integrity of the rotor is not compromised during harsh running conditions. Oversized NMB bearings and vibration dampening system ensure the longest bearing life possible. Our proprietary winding techniques allow us to produce a stator assembly that is the lowest possible resistance, resulting in a cooler running motor. Dual sensor ports to ensure optimal installation in your large-scale vehicle. Updated modern and sleek design; looks as cool as it performs. The Castle 2028 Extreme 800KV motor now has an IMPROVED 4-POLE 12-SLOT design that boasts exceptional EFFICIENCY and produces LESS HEAT. If you need LARGE-SCALE POWER for LARGE-SCALE VEHICLES the new BRUSHLESS SENSORED 2028-800KV motor will no doubt hold up to the heavy throttle and extended usage that 1/5th scale vehicles like the Losi 5IVE-T, 5IVE-B or DBXL-E encounter. It is the perfect upgrade for any 1:5 scale RC hobby vehicles (including gas to electric conversions) weighing up to 30 lbs for 2WD and 25 lbs. for 4WD. The 2028 Extreme can easily run in the 10 horsepower range* *Burst power output for durations typical of vehicle acceleration. Without a robust and reliable design, efficiency will only go so far. RC enthusiasts love pushing their equipment to the edge. The Castle engineers know this and spared no expense when developing a design that could hold up to the harsh conditions that the RC community will throw at it, resulting in a cooler running motor. A cooler motor has a longer lifetime. Construction of our motor required careful component selection; each verified through internal testing to ensure the HIGHEST EFFICIENCY possible. In the end, the result is a motor with unmatched quality, performance, and reliability. We wouldn’t put our name on anything less. Specifications: Input Voltage Range: 12S MAX Kv: 800 Max. RPM: 45,000 Size: Length: 112.7mm Diameter: 56.3mm Weight (w/wires): 1.25kg Shaft Size: Length: 30mm Diameter: 8mm Mounting Hole Specifications: 4mm @ 30mm Cooling Fan: Available, but not included. Connectors: 8.0mm male connectors, 250mm sensor wire. Items Needed for Operation: Compatible Electronic Speed Control (ESC) Product Use Statements: Monitor motor temperatures closely; overheating a motor will cause permanent damage to the magnets. Never exceed 180° F on the the motor or ESC. Application Guidelines: The 2028-800KV is a water resistant design. The sensor board is coated with silicone conformal coating to protect the sensors from moisture. The sensor connections are not water resistant; water can cause signal loss which could result in loss of sensored capabilities. We recommend applying dielectric grease to the outside of the sensor wire connections after installation of the wire. Routine maintenance is recommended after running in wet conditions. Please refer to this document for running and maintaining motors in wet environments. Recommended ESC(s): Mamba XL X Mamba Monster X 8S (requires changing bullets to 6.5mm) Max. Recommended Vehicle Weight: 4WD vehicles weighing less than 11kg. 2WD vehicles weighing less than 13.6kg. Tech Notes: Running modes: Sensorless and Sensored

4.195,-

4.895,-

KJØP
-14%
Hovedbilde Castle Creation Motor Sensor Inrunner 4-pole ... Hovedbilde Castle Creation Motor Sensor Inrunner 4-pole ...
Castle Creation Motor Sensor Inrunner 4-pole ...
Art.nr: 060-0081-00
Copied
Motor Sensor Inrunner 4-pole 1717-1650KV 1/8-1/6 Castle 1717 1Y Sensored Motor - 1650Kv The Castle 1717 1650KV motor is a 4-POLE 12-SLOT design that boasts exceptional EFFICIENCY and produces LESS HEAT. This motor is a blast from the past with the added benefit of sensored capabilities! It is the perfect upgrade for any 1/6th scale vehicles weighing up to 20 lbs and running up to 8s LiPo; it is also a great upgrade for drivers looking for a reliable, high torque 8s motor for their 1/8th scale vehicles. Running modes include Sensored and an ULTRA-EFFICIENT sensorless mode. High-strength, high-temperature grade neodymium sintered magnets combined with High-strength Kevlar wrap ensures the integrity of the rotor is not compromised during harsh running conditions. Oversized NMB bearings and vibration dampening system ensure the longest bearing life possible. Our proprietary winding techniques allow us to produce a stator assembly that is the lowest possible resistance, resulting in a cooler running motor. Updated modern and sleek design; looks as cool as it performs. Without a robust and reliable design, efficiency will only go so far. RC enthusiasts love pushing their equipment to the edge. The Castle engineers know this and spared no expense when developing a design that could hold up to the harsh conditions that the RC community will throw at it, resulting in a cooler running motor. A cooler motor has a longer lifetime. Construction of our motor required careful component selection; each verified through internal testing to ensure the HIGHEST EFFICIENCY possible. In the end, the result is a motor with unmatched quality, performance, and reliability. We wouldn’t put our name on anything less.   Minimum Input Voltage : 3S Maximum Input Voltage : 8S Sensored Capable : Yes Recon G6 Certified Motor : No ROAR Certified Motor : No Specs: Input Voltage Range: 8S LiPo Max Kv: 1650 Max. RPM: 56,000 Size: Diameter: 47.6mm at fins, 46mm at can Length: 85.1mm Weight (w/wires): 597.6g (548g without wires) Shaft Size: Length: 20mm Diameter: 5mm Mounting Hole Specifications: M3 and M4 @ 25.4mm (1") Cooling Fan: N/A Connectors: 6.5mm male bullets Items Needed for Operation: Compatible Electronic Speed Control (ESC) (see Recommended ESC(s) below) Product Use Statements: Monitor motor temperatures closely; overheating a motor will cause permanent damage to the magnets. Never exceed 180° F on the the motor or ESC. Do not use mounting screws that extend more than 5mm into the front of the motor. Using too long of a screw can result in damage to the motor's windings and will not be covered by the warranty. Application Guidelines: The 1717-1650Kv is a water resistant design. The sensor board is coated with silicone conformal coating to protect the sensors from moisture. The sensor connections are not water resistant; water can cause signal loss which could result in loss of sensored capabilities. We recommend applying dielectric grease to the outside of the sensor wire connections after installation of the wire. Routine maintenance is recommended after running in wet conditions. Please refer to this document for running and maintaining motors in wet environments. Recommended ESC(s): Mamba Monster X 8S Max. Recommended Vehicle Weight: Vehicles weighing less than 20lbs. Tech Notes: Running modes: Sensorless and Sensored Application: Car Motor Type: Brushless kV Value: 1650 kV Motor diameter: 46 mm Motor length: 85,1 mm Shaft length: 20 mm Shaft Diameter: 5 mm Weight: 597,6 gram Max Rev.: 56000 rpm Connector: 6,5mm Bullet Max voltage: 88,8 V Special: Sensor-based    

3.395,-

3.595,-

KJØP
-6%
Hovedbilde Castle Creation Motor Sensored Inrunner 4-pole ... Hovedbilde Castle Creation Motor Sensored Inrunner 4-pole ...
Castle Creation Motor Sensored Inrunner 4-pole ...
Art.nr: CC060-0087-00
Copied
Castle 2028 1Y Sensored Motor - 1100Kv We take OVERPOWERING seriously. The BRAND NEW Castle 2028 Extreme 1100KV motor is a 4-POLE 12-SLOT design that boasts exceptional EFFICIENCY and produces LESS HEAT. If you need LARGE-SCALE POWER for LARGE-SCALE VEHICLES the new BRUSHLESS SENSORED 2028-1100KV motor will no doubt hold up to the heavy throttle and extended usage that 1/5th scale vehicles like the Losi 5IVE-T, 5IVE-B or DBXL-E encounter. It is the perfect upgrade for any 1:5 scale RC hobby vehicles (including gas to electric conversions) weighing up to 30 lbs for 2WD and 25 lbs. for 4WD. The 2028 Extreme can easily run in the 10 horsepower range* *Burst power output for durations typical of vehicle acceleration. FEATURES: Running modes include Sensored and an ULTRA-EFFICIENT sensorless mode. High-strength, high-temperature grade neodymium sintered magnets combined with High-strength Kevlar wrap ensures the integrity of the rotor is not compromised during harsh running conditions. Oversized NMB bearings and vibration dampening system ensure the longest bearing life possible. Our proprietary winding techniques allow us to produce a stator assembly that is the lowest possible resistance, resulting in a cooler running motor. Dual sensor ports to ensure optimal installation in your large-scale vehicle. Updated modern and sleek design; looks as cool as it performs. Without a robust and reliable design, efficiency will only go so far. RC enthusiasts love pushing their equipment to the edge. The Castle engineers know this and spared no expense when developing a design that could hold up to the harsh conditions that the RC community will throw at it, resulting in a cooler running motor. A cooler motor has a longer lifetime. Construction of our motor required careful component selection; each verified through internal testing to ensure the HIGHEST EFFICIENCY possible. In the end, the result is a motor with unmatched quality, performance, and reliability. We wouldn’t put our name on anything less.

3.795,-

4.395,-

KJØP
-14%
Hovedbilde Castle Creation Motor Sensored 4-Pole 1721-2400KV Hovedbilde Castle Creation Motor Sensored 4-Pole 1721-2400KV
Castle Creation Motor Sensored 4-Pole 1721-2400KV
Art.nr: 060-0091-00
Copied
Castle 1721 .5Y Sensored Motor - 2400Kv The 1721-2400Kv motor is available to those that are ready to take their extreme speed and drag setups to the next level. Please read all product use statements and disclaimers before purchasing and installing this motor! Ideal for running up to 8s LiPo in 1/8 and 1/7 scale vehicles, the mechanical design boasts a stainless-steel sleeve to reinforce and strengthen the rotor for high RPM operation. Coupled with a massive 8mm stainless steel motor shaft, 8.0mm bullets and high strand, low resistance, silicone coated 8 gauge copper wire, the 1721-2400Kv will deliver massive power and maximum top end speed. Warranty: Castle products are backed by the industry's best service and support.This motor is balanced and tested during manufacture and is warranted free from defects in materials and workmanship for 30 days following the original date of purchase. Due to the abusive nature of drag and speed run setups, Castle is not liable for incidental or consequential damages to other equipment such as ESCs and batteries when using this motor and is not responsible for failures resulting from abuse, improper installation, misapplication or alteration. WARNING: Drag and speed run setups are inherently abusive and extremely hard on all electronic components. Every component in the configuration can be strained, weakened (or worse) without using extreme caution, observance of electric theory and advanced knowledge of all aspects of the RC hobby. High speed runs and drag racing are the most advanced, aggressive and volatile applications in the RC car hobby. Improper setup or use of this product can result in catastrophic failures of the motor, ESC and/or batteries. We’ve outlined important product use information below; following these guidelines will significantly reduce failures and increase your happiness and excitement. If you have any questions, just give us a call; we have real people right here in the USA ready to help you get the most (as safely as possible) from your setup. Specs: Input Voltage Range: Min: 4s LiPo - Max: 8s LiPo (33.6V) Kv: 2400 Max. RPM: 90,000 Size: Diameter: 1.87” (47.6mm) at fins, 46mm at can. Length: 101.2mm Weight (w/wires): 816.4g (28.8oz) Shaft Size: Length: 22mm Diameter: 8mm Mounting Hole Specifications: M3 and M4 @ 25.4mm (1") Cooling Fan: N/A Connectors: 8mm male bullets on 8 gauge wire Items Needed for Operation: Compatible Electronic Speed Control (ESC) Product Use Statements: This is an extremely powerful motor designed for advanced and experienced users only. Below are suggestions for increasing your likelihood of success but it is not guaranteed. This is a VERY high RPM motor. Start with very conservative gearing (small pinion/large spur). Check your data logs, temperatures and setup closely after each run to ensure you are not stressing components. This motor is intended for single passes only; allow time between runs for the ESC, batteries and motor to cool down to ambient temperatures. This motor can pull very high amperages. Make sure your batteries, connectors and soldering are capable of handling the loads. Inadequate power can cause poor performance and damage the batteries and/or ESC. Do NOT free rev the motor with no load, particularly when running 6s or higher. The RPM output of the motor is much higher with no load as the kv and battery voltages do not drop. Set ESC timing to Lowest (0). This motor will pull considerably more amperage as you increase timing. This does not necessarily equate to more speed as it puts more strain on the batteries and causes the voltage to sag. Less is more sometimes. Do not exceed 33.6v when using this motor. Be sure your pinion and motor bullets are secure before and after each run. Recommended ESC(s): Mamba XLX2 Running Modes: SmartSense™ (with Castle Sensor capable ESC), Sensored and an ultra-efficient Sensorless mode. Tech Notes: Water Resistant Design: The sensor board is coated with silicone conformal coating to protect the sensors from moisture. The sensor connections are not water resistant; water can cause signal loss which could result in loss of sensored capabilities. Castle recommended applying dielectric grease to the outside of the sensor wire connections after installation of the wire. Routine maintenance is recommended after running in wet conditions. Please refer to this document for running and maintaining motors in wet environments.

3.995,-

4.195,-

KJØP
-5%
Hovedbilde Castle Creation Motor Sensor Inrunner 4-Pole ... Hovedbilde Castle Creation Motor Sensor Inrunner 4-Pole ...
Castle Creation Motor Sensor Inrunner 4-Pole ...
Art.nr: CC060-0075-00
Copied
Dette produktet er erstattet av denne motoren!(trykk her) Castle 1520-1650KV - 1Y Sensored Motor The Castle 1520-1650KV motor is a 4-POLE 12-SLOT design that boasts exceptional EFFICIENCY and produces LESS HEAT. This motor is a blast from the past with the added benefit of sensored capabilities! It is the perfect upgrade for any for 1/8, 1/7 and 1/6 scale vehicles weighing up to 18lbs and up to 8s LiPo. The 1520-1650Kv has all of the secret sauce that the big brother 1717-1650Kv has, but in a more compact diameter, fitting into smaller spaces without modifications to your chassis. Minimum Input Voltage : 3S Maximum Input Voltage : 8S Sensored Capable : Yes Recon G6 Certified Motor : No ROAR Certified Motor : No Vehicle examples include Losi LST2-E™; Arrma™: Limitless™, Typhon™ 6s, Kraton 6s™, Kraton EXB™, Infraction™ Felony™ 6s, Notorious 6s™, Talion™ 6s; Kyosho Inferno™, Traxxas: E-Maxx™, E-Revo™, UDR™, Summit™; Redcat Shredder™   Running modes include SmartSense™ Sensored and an ULTRA-EFFICIENT sensorless mode. High-strength, high-temperature grade neodymium sintered magnets combined with High-strength Kevlar wrap ensures the integrity of the rotor is not compromised during harsh running conditions. Oversized NMB bearings and vibration dampening system ensure the longest bearing life possible. Our proprietary winding techniques allow us to produce a stator assembly that is the lowest possible resistance, resulting in a cooler running motor. Updated modern and sleek design; looks as cool as it performs. Without a robust and reliable design, efficiency will only go so far. RC enthusiasts love pushing their equipment to the edge. The Castle engineers know this and spared no expense when developing a design that could hold up to the harsh conditions that the RC community will throw at it, resulting in a cooler running motor. A cooler motor has a longer lifetime. Construction of our motor required careful component selection; each verified through internal testing to ensure the HIGHEST EFFICIENCY possible. In the end, the result is a motor with unmatched quality, performance, and reliability. We wouldn’t put our name on anything less. Specs: Application: The 1520-1650kV motor is intended for use in 1/6, 1/7 and 1/8 scale vehicles weighing up to 18 lbs. and running up to 8s LiPo. Examples include Losi LST2-E™; Arrma™: Limitless™, Typhon™ 6s, Kraton 6s™, Kraton EXB™, Infraction™ Felony™ 6s, Notorious 6s™, Talion™ 6s; Kyosho Inferno™, Traxxas: E-Maxx™, E-Revo™, UDR™, Summit™; Redcat Shredder™ Max Weight: 8.1kg Input Voltage: 3s-8s Kv: 1650 Max RPM: 60,000 Diameter: 41.6mm Length: 88.8mm Weight (with wires): 508g (459g without wires) Shaft Size: 5mm Mounting Hole Specifications: M3 and M4 @ 25.4mm (1.0") Diameter Running Modes: SmartSense™ Sensored and an ultra-efficient Sensorless mode Cooling Fan: N/A Connectors: 6.5mm make connectors and 10AWG wire I tems Needed for Operation: Compatible Electronic Speed Control - We recommend Mamba Monster X 8S Product Use Statements: Monitor motor temperatures closely; overheating a motor will cause permanent damage to the magnets. Never exceed 180° F on the the motor or ESC. Do not use mounting screws that extend more than 5mm into the front of the motor. Using too long of a screw can result in damage to the motor's windings and will not be covered by the warranty. Tech Notes: The 1520-1650Kv is a water resistant design. The sensor board is coated with silicone conformal coating to protect the sensors from moisture. The sensor connections are not water resistant; water can cause signal loss which could result in loss of sensored capabilities. We recommend applying dielectric grease to the outside of the sensor wire connections after installation of the wire. Routine maintenance is recommended after running in wet conditions. Please refer to this document for running and maintaining motors in wet environments.

3.095,-

3.295,-

KONTAKT
-6%
Hovedbilde Castle Creations Motor Sensor Inrunner 4-Pole ...
Castle Creations Motor Sensor Inrunner 4-Pole ...
Art.nr: 060-0093-00
Copied
Castle Creations Motor Sensor Inrunner 4-Pole 1515-2200KV V2

2.795,-

2.995,-

KJØP
-7%
Hovedbilde Castle Creations CC BEC 10A 6S Switching Regulator
Castle Creations CC BEC 10A 6S Switching Regulator
Art.nr: 010-0004-00
Copied
This is the CC BEC 10A Receiver Battery Eliminator by Castle Creations. FEATURES: Eliminates the need for a receiver and servo battery pack           Draws higher voltage from the motor batteries and drops it to a             voltage level suitable for the receiver and servos INCLUDES: One CC BEC receiver battery eliminator REQUIRES: Installation in the aircraft SPECS:    Length: 1.2" (30mm)           Width:   .6" (15mm)           Height:  .4" (10mm)           Weight:  .4oz (11g)           Input voltage: 5V to 25.2V (2S to 6S LiPo)           Current output: 12 volts input = 7 amps* continuous, 10 amp peak;             24 volts input = 5 amps* continuous, 7 amp peak             *Ratings are determined with a 5mph airflow on the BEC           Selectable Output: 4.8 - 9.0V via the Castle Link (sold separately)             Default voltage is 5.1V

399,-

449,-

KJØP
-11%
Hovedbilde Castle Creations CC BEC Pro 20A 12S Switching ...
Castle Creations CC BEC Pro 20A 12S Switching ...
Art.nr: 010-0004-01
Copied
BEC(Battery Eliminator Circuits) er små enheter som fjerner behovet for eget batteri til mottaker og servoer. Enheten mottar høy spenning fra drivbatteriet og justerer ned til passende volt for radiosystemet ditt. Dette er gjerne nødvendig i systemer som drar mye strøm pga. amnge servoer, eller ved bruk av høyre enn 3s drivbatteri. For å justere voltstyrken trengs Castle USB Link (medfølger ikke). This is the CC BEC Pro High Output Switching Battery Eliminator Circuit (BEC)                            from Castle Creations. FEATURES: Ideal for use in larger RC cars, electric aircraft, and electric             helis 500 size and larger that have high power demands for their             radio system           Also works well in larger electric powered RC aircraft and RC             crawlers and monster trucks that use high powered servos   INCLUDES: CC BEC Pro High Output Switching BEC with connectors and instruction             sheet   REQUIRES: Installing between battery and receiver   SPECS:    Max Input: 12S LiPo (50.4V)           Max Output Current: 20 amps peak           Adjustable Output Voltage: 4.8V-12.5V           Max Continuous Current: Input Voltage  Max Continuous Output Current                                      16V                    15A                                      24V                    13A                                      32V                    11A                                      40V                     9A                                      48V                     8A           Length: 1.69" (43mm)           Width: 1.3" (33mm)           Height: 0.94" (24mm)           Weight (w/o wires): 1 oz (29 g)   PS! CC BEC Pro skal ikke brukes i serie eller parallell med annen BEC eller som backup til mottakerpakkke tilkoblet RX/Servo siden av systemet.

799,-

849,-

KJØP
-6%
Hovedbilde Castle 010015300 Creations CC BEC 2.0 Hovedbilde Castle 010015300 Creations CC BEC 2.0
Castle 010015300 Creations CC BEC 2.0
Art.nr: 010-0153-00
Copied
This is the Castle Creations CC-BEC 2.0 Battery Eliminator Circuit Switching Waterproof Voltage Regulator. FEATURES For crawler, marine, sea plane, UAS and industrial applications Wide input voltage range of 2S-14S (6V-58.8V) 15 amp 5.25V @ 12S peak output current 4.75-12V adjustable output voltage Waterproof under normal usage INCLUDES CC-BEC 2.0 BEC Waterproof Voltage Regulator SPECIFICATIONS Length: 1.37" (35mm) Width: 0.69" (18mm) Height: 0.75" (19mm) Weight: 1.0oz (28g) w/full length wires, wires may be shortened to save weight Peak Current: 15A depending on input and output voltage Continuous Output Current: 5-6V Output: 10A 6.25-8.5V Output: 9A 8.75-10V Output: 8A 10.25-12.0V Output: 7A Adjustable Output Voltage: 4.75-12V (adjustable via Castle Link-sold separately) Default Setting: 5.25V Max Voltage:Surface, 12S (50.2V) Air (no brake): 14S (58.8V) Air (w/brake): 12S (50.2V)

849,-

899,-

KJØP
-6%
Hovedbilde Castle Creations 1/10 Sidewinder 3 Waterproof ESC
Castle Creations 1/10 Sidewinder 3 Waterproof ESC
Art.nr: 010-0115-00
Copied
This is the Castle Creations Sidewinder SV3 12V Electronic Speed Control. FEATURES: Recommended for all 1/10 scale buggy and truggy applications that             weigh less than 5lbs (2.25kg) ready to run (not for use in heavier             vehicles such as E-Revos or E-Maxx class vehicles)           USB programming capability via Castle Link USB adapter.           Waterproof for use in nearly every environment (not intended for             operation while submerged in liquid)           Compatible with the Castle Creations 14xx series NeuCastle motors           Reversible with reverse lockout INCLUDES: Sidewinder SV3 12V ESC with 13 gauge Motor Wires, 4mm Female Bullet             Motor Connectors, 13 gauge Battery Wires with Pre-Tinned Leads,             Receiver Connector, On/Off Switch, Instructions REQUIRES: Battery connector of modeler's choice SPECS:    Input Voltage: 2S LiPo minimum, 3S LiPo maximum, 9 cell NiCd/NiMH           Brake: Proportional           Reversible: Yes, with lockout           Dimensions: 1.93 x 1.48 x 0.79" (49 x 38 x 20mm)           Weight: 1.96 oz (55.5 g) with 5" (127mm) long battery wires and no             battery connector

949,-

1.149,-

KJØP
-17%
Hovedbilde Castle Creations Mamba Monster X Waterproof ESC
Castle Creations Mamba Monster X Waterproof ESC
Art.nr: 010-0145-00
Copied
First, there was the Monster. Then the Monster 2. Now there’s the Monster X. As revolutionary as it’s predecessors, the new Monster X Electronic Speed Controller (ESC) takes Castle’s legendary “monster” performance to a whole new level. The waterproof* Monster X is capable of 2S LiPo up to a maximum of 6S LiPo and is the legendary “power up” for 1/8th scale buggies, truggies and on-road vehicles as well as 1/10th scale monster trucks and R/C monstrosities weighing up to 15 lbs. Extreme Power • Extreme Control • Extreme Fun! The new Monster X provides even more extreme performance than the Monster 2. Most notable is the addition of a new, programmable Auxiliary Wire that allows users to make “on-the-go” adjustments to several settings, such as torque control and max throttle. The new Auxiliary Wire allows users to fine-tune the performance of their Monster X ESC right from the transmitter using an auxiliary channel on the receiver. The AUX wire function is disabled by default but is programmable via Castle Link. Once the user has programmed the functionality of the AUX wire, that setting can then be adjusted on-the-go from a compatible transmitter. The Monster X also features updated Audible Alerts that will notify drivers of possible issues with their calibrations and error conditions to help diagnose problems in the field. Sensored Motor Capable The new Monster X can also be configured to run sensored brushless motors with the purchase of an optional Sensor Harness from Castle Creations. This sensored-motor capability opens up a whole new segment of R/C enthusiasts who will now get to experience (or see the rooster tails) from a Castle Monster X-equipped racer, rock racer or rock crawler. One of our Monster X Beta testers summed up his experience, saying “Another race weekend in the books. Once again, in sensored mode, the ESC (Monster X) performed flawlessly. Great power and smooth transition from sensored to non-sensored.” Extreme Power The new Monster X is capable of running from 2S to a maximum of 6S LiPo power, but now features an improved heavy-duty adjustable Battery Eliminator Circuit (BEC) to provide plenty of power for today’s power hungry servos. The Monster X BEC voltage is adjustable from 5.5V, 6.0V, 7.5V and 8.0V with an 8 AMP peak. The Monster X also comes standard with a highly efficient, 30mm ESC cooling fan. Monster X Data Logging Also new to the Monster X is the ability to capture and record performance data from your last couple of runs, commonly referred to as data logging. This data can be downloaded via the upcoming Castle Quick Connect Duo (sold separately) that allows the user access to both wires into the single Castle Link connection. The user can then analyze this data and make adjustments to the ESC to maximize both performance and battery life. Telemetry Ready (Compatibility Coming Soon for Futaba T4PX Transmitters!) The new Monster X is telemetry ready, which means owners of Futaba T4PX Transmitters will be able to purchase the Castle Creations S.BUS Telemetry Link when it is released. Real-time data such as ESC temperature, voltages and RPM can be monitored to ensure performance advantages and spare you the “unknown” parameters that all R/C enthusiasts experience at some point. Telemetry data provides another level of protection, can increase your “tuning awareness” and in turn, let you have more time doing what you love to do – burn rubber and throw dirt! Throttle Input: Flexible input - Digital S.BUS Channels (1-16) or an External non-S.BUS Input Available Telemetry Data (Monster X):      Battery Voltage Battery Current Motor Power Output RPM BEC Voltage Battery Ripple ESC Temperature Compatible Transmitters:      Futaba T4PX & T7PX Tech Notes: Link Live mode must be enabled through Castle Link USB adapter to allow communication with the Telemetry Link. Extreme ESC and Extreme Combos The Mamba Monster X is available as an ESC only or in combination with Castle’s award-winning 15XX Series brushless motors; the 1515 2200KV or the 1512 2650KV motor. Castle Link Adjustable Settings for te Monster X include: Brake/Reverse Type LiPo Cutoff Voltage Brake Amount Drag Brake Motor Type Additional Castle Link Benefits include: Access all firmware updates, included added feature sets released from Castle Engineering FREE of charge Intuitive Demo Mode Ability to save basic to complex setup profiles for later use Award Winning Combination The new Mamba Monster X is available as an ESC only or in combination one of two different Castle motors; the 1515 2200KV or the 1512 2650KV brushless motor.Specifications: Input Voltage Range: MIN: 2S LiPo; MAX: 6S LiPo (25.2V) BEC Specifications: Adjustable: 5.5V, 6.0V, 7.5V. or 8.0V (8A Peak), default 5.5V Operating Environment: Waterproof* design allows for use in nearly any environment. (See Product Use Statements)* Brake: Proportional Reversible: Yes - with lockout On/Off Switch: Yes ESC Cooling Fan: Yes, factory equipped (30 mm), fully removable and replaceable. (See Product Use Statements)** Size: 53 x 49 mm Weight (w/wires): 111.1 g Items Needed for Operation: Battery Connector required, Castle 6.5mm Connectors are recommended Product Use Statements: *Although Mamba Monster X and Castle brushless motors are waterproof, they are not intended for operation while completely submerged in liquid. They can corrode when exposed to corrosive materials, such as salt water. Always rinse the ESC and motor with clean water after exposure to corrosives or dirt. While the motor and controller may be waterproof, we suggest users confirm that the rest of their vehicle, including the batteries, servos, radio and chassis are also waterproof before exposing them to liquids of any kind. **The cooling fan must be removed prior to driving in wet conditions. It is not waterproof. Application Guidelines: Intended for up to 6S (25.2 Volt) operation in vehicles weighing less than 15 lbs, with batteries, ready-to-run. Tech Notes: Not all LiPos are created equal, and surge ratings should never be used to determine a pack’s suitability for a brushless application. Use the CONTINUOUS C rating only. Mamba Monster setups frequently hit 100+ amps in peaks. We strongly suggest using 5,000 mAh or larger LiPo cells with a discharge rating of at least 30C (or high quality 25C batteries such as Traxxas® Power Cells®). Our experience suggests using only mild gear ratios with NiMH cells. Do not attempt to use NiMH cells in extreme setups. Customer comment: “I am running a Thunder Tiger MT4 G3 1/8th scale monster truck. It had the stock ready-to-run brushless system on it. It was a Ripper (re-branded Leopard) 2,000 Kv 4 pole motor. It was okay, but had multiple electrical problems. The 4mm “squirrel cage” connectors kept melting, until I put on high quality Castle Creations connectors. The motor itself had the non-flexible type motor leads. I fried the motor and speed controller. Enter the Mamba Monster X promotion in my email inbox. Too good an opportunity to pass up. I ordered it on a Friday 7/24, it arrived on a Monday 7/27. I can finally do this monster truck justice. The Mamba Monster X speed controller dropped right in. The 8A peak BEC, adjustable up to 8V is a really nice feature. To take advantage of this, I installed a Hi-Tech HS-7954SH servo, which is 403 oz-in at 7.4V. The data logging feature is a really nice touch. I confirmed the BEC voltage stayed rock solid at 7.4V throughout my entire first run session, after looking at the graph. It really held the load of the high power servo. The aux channel is really nice feature, too, to control various parameters. That, plus this system is waterproof, is icing on the cake. The Castle 1515 2,200 Kv motor is proven performer. It is, after all, WINNER OF RC CAR ACTION'S READERS' CHOICE AWARD FOR 3 CONSECUTIVE YEARS. The 6.5mm bullet connectors are nice. With this combo on 4S, in my 11 lbs truck, I can pull wheelies at any speed. At one point, I data logged a 5.4 hp run. That is simply phenomenal. Armed with just a picture of that, I am convincing my friends to jump into the RC world. You have a real winner on your hand, Castle Creations!” – Stephen Englehart (Thunder Tiger MT4 G3 monster truck, 11 pinion, 50 spur) Customer comment: “This is the BEST controller Castle has ever put out. It was able to drive my hi torque servo with the built in BEC. Tons of new features for data logging and setting the controller up. This will definitely be my goto controller from now on!” – Brad Remenak (Axial Yeti XL Kit pinion - 15T, spur - 68T stock setup - will be switching to 17T pinion soon) Customer comment: “This ESC has been a blast to learn. The controller will actually communicate with you through audible tones to let you know what exactly is going on. It takes the guess work out. The data logging feature is another one of my favorites. The amount of info this controller can track is crazy and you can customize what info to track depending on what is most important to you. I have always been a fan of Castle products and would highly recommend this controller to all R/C enthusiasts” – Henry Urbina (Traxxas Summit 62 tooth spur - 18 tooth pinion) *Not intended for operation while submerged in liquid. If unit is operated in wet conditions, rinse with fresh water to remove dirt or corrosives, then fully dry unit.

2.595,-

2.995,-

KJØP
-13%
Hovedbilde Castle Creations 010016202 Mamba Micro X 12.6V ...
Castle Creations 010016202 Mamba Micro X 12.6V ...
Art.nr: 010-0162-02
Copied
Castle Mamba Micro-X Crawler Edition ESC with 1406-2280KV Sensored Motor Combo Putting the X in Extreme! The Mamba Micro X Crawler edition is our latest offering for the crawling crowd. We have taken our new 1406 low kv crawler motors and paired it with the lightweight, small footprint Mamba Micro X ESC. This combo is ideal for low speed crawling or trail running in vehicles weighing up to 3.6kg on 2s or 3s; it can also be used in slightly more aggressive setups like rock racing and extended hill climbing on vehicles up to 1.8kg. If you're looking for a more aggressive setup in a heavier rig, like rock racing and extended hill climbing, we recommend you run the Mamba X ESC with the same motor. Your ESC will come with our new V2.02 firmware that has been enhanced for rock crawling and sensored operation. Use of an external BEC is recommended if running a high power or digital servo.   Waterproof : Yes Telemetry Capable : Yes Data Logging : No Auxiliary Wire : Yes Minimum Input Voltage : 2S Maximum Input Voltage : 3S Sensored Capable : Yes This SPECIAL EDITION of the Mamba Micro X includes solder posts with 16 AWG wire for the motor connection; it also includes the matching 4mm female bullets to pair with the included 1406-2280kv sensored brushless motor.  The Auxiliary Advantage Mamba Micro X features the addition of a new, programmable Auxiliary Wire that allows you to make “on-the-go” adjustments to several settings such as torque control, and max throttle, and fine-tune the performance of your ESC right from the transmitter using an auxiliary channel on the receiver. The AUX wire function is disabled by default but is programmable via Castle Link. Once you have programmed the functionality of the AUX wire, that setting can then be adjusted on-the-go from a compatible transmitter. Try out the brand new Crawler Mode for incredible versatility! Telemetry Capability The Mamba Micro X is telemetry ready, which means owners of Futaba T4PX or 7PX Transmitters will be able to purchase the Castle Telemetry Link for S.BUS2. Real-time data such as ESC temperature, voltages, and RPM can be monitored to ensure performance advantages and spare you the “unknown” parameters that all R/C enthusiasts experience at some point. Telemetry data provides another level of protection and can increase performance.  Package Includes: Crawler Edition Mamba Micro X w/solder posts 1406-2280kv sensored brushless motor 210mm length sensor wire (for sensored operation) Castle Sensor Harness adapter Driver's Ed and Quick Start Guides Castle decal sheet ESC Technical Specs: Input Voltage Range: MIN: 2S LiPo / MAX: 3S LiPo (12.6V) BEC Specifications: Adjustable: 5.5V or 7.5V (2A Peak), default 5.5V. Use of external BEC is recommended if using a high torque/speed digital servo; the CC BEC or CC BEC 2.0 Waterproof are recommended Operating Environment: Waterproof* design allows for use in nearly any environment Brake: Proportional Reversible: Yes, but can be disabled for racing On/Off Switch: Yes, waterproof* Cooling Fan: No Length: 41mm Width: 19mm 28mm Weight (without wires): 34g Connectors: 4mm male Castle Bullet Connectors attached to replaceable 16 gauge wire; includes Castle sensor harness. Items Needed for Operation: Battery Connector required, Castle 4mm polarized Connectors, T- Plugs, or Traxxas Power Connect are recommended. Product Use Statements:  Applying voltages higher than 12.6 volts will cause irreparable damage to your controller, voiding your warranty. Recommended battery capacity is at least 1500mAh and 25C. Castle recommends running the highest mAh that will fit in your vehicle and the highest C rating you can afford. The Crawler Edition Mamba Micro X has solder posts for the motor connections; includes 13 gauge wire with 4mm female bullets that connect directly to the included 1406-1900kv motors and the battery input wires are bare. You must solder the connector to the wires on the ESC. See Items Needed for Operation for recommendations. Application Guidelines: Low speed crawling or trail running in vehicles weighing up to 3.6kg. If you're looking for a more aggressive setup, like rock racing and extended hill climbing it is recommend to run the Mamba X ESC with the same motor. Recommended Motors: Combo includes 1406-1900kv sensored brushless motor. Max. Recommended Vehicle Weight: 3.6kg when used for low speed/moderate driving style; 1.8kg for more aggressive driving styles. Programmability: Fully programmable Castle feature set using Castle Link USB adapter and freely downloadable Castle Link Windows software. Telemetry Link Capable: Yes Tech Notes: *Not intended for operation while submerged in liquid. If unit is operated in wet conditions, rinse with fresh water to remove dirt or corrosives, then fully dry unit. Motor specs: Input Voltage Range: 2S-3S LiPo Kv: 2280 Max. RPM: 100,000 Length: 49.5mm Diameter: 36mm Weight (w/wires): 197g Shaft Length: 15mm Shaft Diameter: 1/8" (3.17mm) Optional 5mm rotor replacement available Mounting Hole Specifications: M3 @ 25mm Cooling Fan: Optional - Coming Soon Connectors: 4mm male Castle Bullet Connectors attached to replaceable 13 gauge wire; includes 210mm length sensored wire. Application Guidelines: Ideal for 1/10 scale low speed rock crawlers/trail runners on 2S-3S weighing less than 3.6kg. It can also be used in more aggressive setups in lighter 1/10 scale touring cars, stadium trucks or buggies weighing up to 2.2kg Max. Recommended Vehicle Weight: 3.6kg when used for low speed/moderate driving style like rock crawling and trail running; 1.8kg for more racing and aggressive driving styles. Tech Notes:  Running modes: SMARTSENSE™, Sensored, Sensorless with Castle sensored capable ESCs. Water Resistant Design: The sensor board is coated with silicone conformal coating to protect the sensors from moisture. The sensor connections are not water resistant; water can cause signal loss which could result in loss of sensored capabilities. Castle recommended applying dielectric grease to the outside of the sensor wire connections after installation of the wire. Routine maintenance is recommended after running in wet conditions. Please refer to this document for running and maintaining motors in wet environments.

2.395,-

2.595,-

KJØP
-8%
Hovedbilde Castle Creation 010013910Sidewinder 8TH ESC 25,2V 8A ...
Castle Creation 010013910Sidewinder 8TH ESC 25,2V 8A ...
Art.nr: 010-0139-10
Copied
Sidewinder 8th is our sport 1:8 scale waterproof* ESC that we have paired with the 1515B-2200Kv  - until now! It’s perfect for entry level, weekend basher, or serious road warriors seeking the benefits of an affordable brushless upgrade.Capable of 2-6S LiPo, with an 8 amp peak BEC the Sidewinder 8 is the perfect upgrade for 1:8 scale buggies, truggies and on-road vehicles as well as 1:10 scale monster trucks weighing up to 11 lbs. It can also work as a great upgrade for some 4WD short course trucks for 3s or 4s operation.   Waterproof : Yes Telemetry Capable : No Data Logging : No Auxiliary Wire : No Minimum Input Voltage : 2S Maximum Input Voltage : 6S Sensored Capable : No Recon G6 Certified ESC : No ROAR Certified ESC : No Features: 2s - 6s LiPo (25.2V) use in vehicles up 5Kg with battery, ready-to-run. Sensorless motor operation. Large 6.5mm female motor bullet connectors (male connectors sold separately) Waterproof design ESC and splash resistant 30MM fan Powerful 5.5 volts fixed, 8 amps Peak BEC LED error codes for common error conditions Smooth sensorless startups Convenient transmitter programming for nine common adjustable settings Full compatible with the Castle Link Programming Suite to modify settings and download software updates available via Windows®-based Castle Link software and USB adapter (purchased separately), Field Link Card (sold separately), or the Castle Link iOS App and a B-Link Bluetooth Adapter. (sold separately) Specifications: Input Voltage: MIN: 2S Li-Po; MAX 6S Li-Po BEC: 5,5Volt fixed, 8A Peak Brake: Proportional Reverse: Yes (may be disabled for racing) On/Off Swith: No Cooling Fan: Yes (30mm) Size: L:62,2mm B:56mm H:34mm Weight: 100gram Connectors: 6,5mm female bullets for motor: Battery connector required Castle Link Compatible With the optional Castle Link USB Programming Kit you can use your Windows™ PC to easily program your controller. Adjustable settings include: Throttle curve Braking curve Drag brake Auto LiPo cutoff Punch Control Reverse Type Motor Type Additional Castle Link benefits include: Access to all firmware updates, including added features sets released from Castle Engineering, at no charge. Intuitive Demo Mode capability. Ability to save setup profiles for later use.

1.690,-

KJØP
Hovedbilde Castle Creation 010016500 Mamba Monster X 8S 33,6V ESC Hovedbilde Castle Creation 010016500 Mamba Monster X 8S 33,6V ESC
Castle Creation 010016500 Mamba Monster X 8S 33,6V ESC
Art.nr: 010-0165-00
Copied
Castle Mamba Monster-X-8S, 33.6V ESC MORE POWER - COOLER TEMPS - LONGER RUNS Take your 1:6th scale build or upgrade to the next level with Castle’s legendary brushless power. With the introduction of the MAMBA MONSTER X 8S any R/C vehicle weighing up to 25lbs, and running up to 8S LiPo, is fair game. Waterproof : Yes Telemetry Capable : Yes Data Logging : Yes Auxiliary Wire : Yes Minimum Input Voltage : 2S Maximum Input Voltage : 8S Sensored Capable : Yes Recon G6 Certified ESC : No ROAR Certified ESC : No CRYO-DRIVE : Yes Specs: Applications: 1:6th Scale vehicles weighing up to 11kg Input Voltage Range: MIN: 2S LiPo, MAX: 8S LiPo 33.6V Running Modes: Sensored, Sensorless and SmartSense™ when paired with a Castle 4-POLE 12-SLOT Sensored Motor. Brake: Proportional Reversible: Yes, but may be disabled for racing. On/Off Switch: Yes, waterproof Cooling Fan: Yes, factory equipped (40mm), fully removable** (see Product Use Statements below) Size (LxWxH): 69.5x54.1x47mm Weight (with wires): 163gr Connectors type: 6.5mm female bullets for motor connection Items Needed for Operation: A high current connector designed for high-powered electric systems, rated for 120+ amps, such as Castle CC Bullet 6.5mm, CC Bullet 8.0mm, or 6.5mm Polarized Castle Connectors, soldered to the battery leads. Operating environment: Waterproof design for all weather conditions Programmability: Fully programmable Castle feature set using Castle Link USB adapter(coupon for free link included in package) and freely downloadable Castle Link Windows software, or the Castle Link App and a B-LINK Bluetooth Adapter (sold separately). Telemetry Link Capable: Yes, with Castle Creations Telemetry Link for S.BUS2 and Futaba T4PX and T7PX Transmitters. Product Use Statements: Recommended battery capacity for 1:6th scale vehicles is 5000mah. We recommend using 50C continuous discharge or higher LiPo batteries. Surge ratings should never be used to determine a pack’s suitability for a brushless application. We recommend a high current connector designed for high-powered electric systems, rated for 120+ amps, such as Castle CC Bullet 6.5mm, CC Bullet 8.0mm, or 6.5mm Polarized Castle Connectors. Applying voltages higher than 33.6V will cause irreparable damage to ESC; DO NOT RUN HV CELLS (above 4.2v/cell) WHEN RUNNING AT MAX CELL COUNT (8s). This will exceed the 33.6v rating and will damage the ESC and not be covered by the warranty. Although Mamba Monster X 8S is waterproof, it is not intended for operation while completely submerged in liquid. Always rinse the ESC with clean water after exposure to corrosives or dirt. The cooling fan must be removed prior to driving in wet conditions. It is not waterproof.

3.295,-

3.595,-

KJØP
-8%
Hovedbilde Castle Creation Copperhead 10 16,8V Sensored ESC Hovedbilde Castle Creation Copperhead 10 16,8V Sensored ESC
Castle Creation Copperhead 10 16,8V Sensored ESC
Art.nr: 010-0166-00
Copied
Castle COPPERHEAD 10, 16.8V, WP SENSORED ESC COPPERHEAD 10 FEATURES: Input Voltage Range : 2s-4s LiPo (ESC Only) SMARTSENSE™, SENSORED ONLY and BRUSHED Running Modes Selectable 5.5V or 7.5V (6A peak) internal BEC (Battery Eliminator Circuit) CRYO-DRIVE™ Technology minimizes the amount of time the ESC’s electrical components spend generating heat, resulting in improved thermal performance during partial throttle operation where the majority of driving occurs. ESC is housed in a durable injection molded case and potted in WATERPROOF epoxy to protect the electronics and promote efficient heat transfer. 30mm removable fan and DUAL USE FAN GUARD Compatible with S.BUS2 Telemetry Link and Futaba T4PX, T7PX and T7PXR transmitters AUDIBLE ALERTS for easy diagnosis of common issues such as motor-over-temperature and low-voltage cutoff. Convenient TRANSMITTER PROGRAMMING for six common adjustable settings inlcuding cutoff voltage and drag brake. DATA LOGGING LITE* captures and records performance data from your vehicle to maximize performance and battery life. (Battery Voltage Battery Ripple, Controller temp, Motor RPM, Motor Temp) SMARTSENSE™ uses the motor’s sensors at startup to provide cog-free starts, excellent torque and low-speed drivability. Once the motor is turning, the ESC seamlessly transitions to Castle’s ultra-efficient sensorless mode. CASTLE LINK USB programming kit (coupon included with purchase) Optional smartphone-based programming with the B-LINK™ BLUETOOTH ADAPTER (sold separately) and Castle Link App available on Google Play or Apple App Store THERE'S A NEW PREDATOR IN TOWN. Meet the COPPERHEAD 10 PERFORMANCE ESC. It takes to the open road as well as it takes to no road at all. This completely new design rounds out our 1:10 scale offerings, positioned between the SIDEWINDER 4 as the entry-level upgrade and the MAMBA X as the extreme performance option. The COPPERHEAD 10 includes CRYO-DRIVE™ TECHNOLOGY, SENSORED MOTOR SUPPORT and DATA LOGGING LITE* with Castle’s signature reliability and performance. Throughout its development the Copperhead has been put to the test in all types of elements and performed as aggressively, or as stealthy, as desired. Whether on the trail dominating the gates or throwing dust on the dirt track, the Copperhead is power hungry when you need it and oozes smooth low-end power for technical low RPM performance. If your rig is outfitted with high-power servos (or additional torque increasing modifications) there is no need to worry about brown-outs, glitching or slow actuating servos. The Copperhead provides clean and constant power with its user selectable (through Castle Link) 5.5V or 7.5V (6A peak) internal BEC. The ESC can be installed and calibrated (plug and play) and provide immediate fuss-free wheel time. Through the interface-free manual programming mode, using your transmitter you can set your low-voltage cutoff, brake/reverse type, brake amount, drag brake, motor type and direction. Likewise, you can employ the use of the Castle Link Programming Suite on your Windows™ PC (coupon for free USB adapter included with purchase), or wirelessly with the convenience of the new B-Link™ Bluetooth™ Adapter and Castle Link app for Android or iOS. Additional Castle Link benefits include access to all firmware updates and added features sets released from Castle Engineering (at no charge), the ability to download and analyze your collected Data Log , an Intuitive Demo Mode capability as well as the option to save setup profiles (for multiple vehicles) for later use. For crawler setups or others that do not require an ESC cooling fan, the fan is easily removed with four screws and the fan guard with the cool COPPERHEAD logo simply clicks back into place on the top of the ESC. It keeps the COPPERHEAD 10 looking mean and provides an extra measure of protection. To further protect your investment, the COPPERHEAD emits audible alerts for easy diagnosis of common issues such as motor-over-temperature and low-voltage cutoff. You'll find a handy decal in your box that contains a reference chart for the eight alert tones, no need to Google while your enjoying your wheel time! We’ve packaged the COPPERHEAD 10 with a dozen different 4-POLE 12-SLOT sensored motor options to eliminate the guesswork in finding the right brushless power upgrade for your basher, crawler, on road vehicle, short course or monster truck. An added bonus of pairing your Copperhead with a Castle 4-Pole 12-Slot sensored motor is enabling SMARTSENSE™ TECHNOLOGY, which uses the motor’s sensors at startup to provide cog-free starts, excellent torque and low-speed drivability. Once the motor is turning, the ESC seamlessly transitions to Castle’s ultra-efficient sensorless mode with electronic timing to advance timing automatically for peak performance in all driving conditions. The all-new COPPERHEAD 10 PERFORMANCE 1/10 SCALE ESC is ideal for those who want sensored motor support, data logging, a 6A peak selectable internal BEC (5.5V or 7.5V) and Castle’s signature reliability and performance in the meanest looking ESC around! If you’re looking to transform your 1:10 scale stock vehicle from dull to dangerously fun COPPERHEAD can do it with its buttery smooth starts, CRYO-DRIVE enabled performance and up to 4S power in a compact, easy-to-install footprint. Waterproof : Yes Telemetry Capable : Yes Data Logging : Yes Auxiliary Wire : No Minimum Input Voltage : 2S Maximum Input Voltage : 4S Sensored Capable : Yes Recon G6 Certified ESC : No ROAR Certified ESC : No CRYO-DRIVE : Yes COPPERHEAD 10 ESC COMES WITH: Copperhead 10 ESC with sensor harness Copperhead decals and Audible Alert Reference Chart Coupon for free Castle Link USB Copperhead Quick Start Guide Sensor port dust cover Copperhead 10 ESC Specs: Application Guidelines: 1/10 scale vehicles weighing up to 3.4kg Input Voltage Range: 2s-4s (16.8V Max) Running Modes: SMARTSENSE™, Sensored Only and Brushed Motor Operation Brake: Proportional Reversible: Yes, but may be disabled for racing On/Off Switch: Yes, waterproof Cooling Fan: Yes, factory equipped (30mm), fully removable** and includes dual use fan guard (See Operating Use Statements) Size: 55.6 x 35.3 x 33.8mm Weight (with wires): 70.9 g Motor Connectors: 4.0mm female bullets for motor connection Items Needed for Operation: Battery Connector required, Castle 4.0mm Polarized Connectors, Traxxas® Power Connectors, or T-Plugs or XT60 connectors are recommended Operating environment: Waterproof design for all weather conditions. Although COPPERHEAD 10 is waterproof, it is not intended for operation while completely submerged in liquid. Always rinse the ESC and motor with clean water after exposure to corrosives or dirt. While the motor and controller may be waterproof, we suggest users confirm that the rest of their vehicle, including the batteries, servos, radio and chassis are also waterproof before exposing them to liquids of any kind. **The cooling fan must be removed prior to driving in wet conditions. It is not waterproof. Programmability: Fully programmable Castle feature set using Castle Link USB adapter (coupon for free link included in package) and freely downloadable Castle Link Windows software, or the Castle Link App and a B-LINK Bluetooth Adapter (sold separately). Telemetry Link Capable: Yes, with Castle Creations Telemetry Link for S.BUS2 and Futaba T4PX, T7PX and T7PXR Transmitters.

1.995,-

2.295,-

KJØP
-13%
Hovedbilde Castle Creation MAMBA Micro X2, 16,8V WP Sensored ESC, ... Hovedbilde Castle Creation MAMBA Micro X2, 16,8V WP Sensored ESC, ...
Castle Creation MAMBA Micro X2, 16,8V WP Sensored ESC, ...
Art.nr: CC 010-0169-00
Copied
Castle Creation MAMBA Micro X2, 16,8V WP Sensored ESC, 3,5 Putting the X in Extreme! The Mamba Micro X2 is a refresh of our popular 1:18 scale Mamba Micro X. This new ESC increases the maximum input voltage to 4s. We also added DATA LOGGING and our CRYO-DRIVE™ TECHNOLOGY; CryoDrive allows the ESC to run cooler and more efficiently at partial throttle.  Like its predecessor, it boasts an 2 amp peak BEC,waterproof* and has SENSORED MOTOR SUPPORT. This is the perfect upgrade for 1:18th scale 2WD or 4WD vehicles up to 2.25 lbs. The Mamba Micro X also works well in some 1:10th scale crawlers for low speed operation (no rock racing/hill climbing). You can now purchase the Mamba Micro X2 Crawler Edition ESC paired with our Slate Crawler motors. FEATURES: Input Voltage range 2S-4S Adjustable: 5.5V or 7.5V (2A Peak), default 5.5V Waterproof design. Sensored Motor capable (with optional sensor harness) Convenient transmitter programming for six common adjustable settings. Additional settings and software updates available via Windows®-based Castle Link software and USB adapter (coupon included with purchase) or the Castle Link App for Android or iOS and a B-LINK Bluetooth Adapter (sold separately) Telemetry Ready (Compatible with S.BUS2 Telemetry Link and Futaba T4PX, T7PX and T7PXR transmitters) Auxiliary Wire Functionality allows for “on-the-fly” adjustments such as Max Power and Max Brake. Audible Alerts that will notify you of possible issues with calibrations and error conditions. Designed and manufactured in Olathe, Kansas and is backed by our 1-year warranty. Mamba Micro X2  ESC Purchase Includes: Mamba Micro X2 ESC with 3.5mm connectors Coupon for free Castle Link USB adapter Quick Start Guide Castle Decals MAMBA MICRO X2, 16.8V, WP SENSORED ESC Putting the X in Extreme!   The Mamba Micro X2 is a refresh of our popular 1:18 scale Mamba Micro X. This new ESC increases the maximum input voltage to 4s. We also added DATA LOGGING and our CRYO-DRIVE™ TECHNOLOGY; CryoDrive allows the ESC to run cooler and more efficiently at partial throttle.  Like its predecessor, it boasts an 2 amp peak BEC,waterproof* and has SENSORED MOTOR SUPPORT. This is the perfect upgrade for 1:18th scale 2WD or 4WD vehicles up to 2.25 lbs. The Mamba Micro X also works well in some 1:10th scale crawlers for low speed operation (no rock racing/hill climbing). You can now purchase the Mamba Micro X2 Crawler Edition ESC paired with our Slate Crawler motors. FEATURES: Input Voltage range 2S-4S Adjustable: 5.5V or 7.5V (2A Peak), default 5.5V Waterproof design. Sensored Motor capable (with optional sensor harness) Convenient transmitter programming for six common adjustable settings. Additional settings and software updates available via Windows®-based Castle Link software and USB adapter (coupon included with purchase) or the Castle Link App for Android or iOS and a B-LINK Bluetooth Adapter (sold separately) Telemetry Ready (Compatible with S.BUS2 Telemetry Link and Futaba T4PX, T7PX and T7PXR transmitters) Auxiliary Wire Functionality allows for “on-the-fly” adjustments such as Max Power and Max Brake. Audible Alerts that will notify you of possible issues with calibrations and error conditions. Designed and manufactured in Olathe, Kansas and is backed by our 1-year warranty. Mamba Micro X2  ESC Purchase Includes: Mamba Micro X2 ESC with 3.5mm connectors Coupon for free Castle Link USB adapter Quick Start Guide Castle Decals *Not intended for operation while submerged in liquid. If unit is operated in wet conditions, rinse with fresh water to remove dirt or corrosives, then fully dry unit. Technical Specs Input Voltage Range: 2S-4S LiPo (16.8V Max) BEC Specifications: Adjustable; 5.5V or 7.5V (default 5.5V) 2A Peak Operating Environment: Waterproof* design allows for use in nearly any environment Brake: Proportional Reversible: Yes, but may be disabled On/Off Switch: Yes, waterproof Cooling Fan: Not included Size (L x W x H): 41.6 mm x 29.4 mm x 21.3 mm (1.64" x 1.16" x .84") Weight (with wires): 1.66 oz / 47 grams Connectors: 3.5 mm bullets Items Needed for Operation: Battery Connector required: Castle 4.0mm Polarized Connectors, Deans Ultra Plugs and XT60 are recommended. Product Use Statements: Applying voltages higher than 16.8 volts will cause irreparable damage to your controller, voiding your warranty. Minimum recommended battery capacity for 1:18 scale vehicles is 1500mAh. We recommend using 30C continuous discharge or higher LiPo batteries (or high quality 25C batteries such as Traxxas® Power Cell). Mamba Micro X has 3.5mm bullet connectors on the motor wires and the battery input wires are bare. You must add the connector of your choice to the battery leads. We recommend a high current connector rated for at least 40 amps. Application Guidelines: 1:18 scale RC hobby vehicles weighing up to 2.25lbs. Recommended Motors: Castle 0808 4100Kv: Max Cells: 3S Lipo or 8 NiMH Castle 0808 5300Kv: Max Cells: 3S Lipo or 8 NiMH Castle 0808 8200Kv: Max Cells: 2S Lipo or 8 NiMH Max. Recommended Vehicle Weight: 2.25 lbs, with batteries, ready-to-run Programmability: Additional settings and software updates available via Windows®-based Castle Link software and USB adapter (coupon included with purchase) or the Castle Link App for Android or iOS and a B-LINK Bluetooth Adapter (sold separately) Telemetry Link Capable: Yes, with Castle Creations Telemetry Link for S.BUS2 and Futaba T4PX and T7PX Transmitters. Tech Notes: *Although the Mamba Micro X2 is waterproof, it is not intended for operation while completely submerged in liquid. They can corrode when exposed to corrosive materials, such as salt water. Always rinse the ESC with clean water after exposure to corrosives or dirt. While the controller may be waterproof, we suggest users confirm that the rest of their vehicle, including the batteries, servos, radio and chassis are also waterproof before exposing them to liquids of any kind.

1.395,-

1.595,-

KJØP
-13%
Hovedbilde Castle Creations 010015508 Mamba X 25.2V WP ESC ... Hovedbilde Castle Creations 010015508 Mamba X 25.2V WP ESC ...
Castle Creations 010015508 Mamba X 25.2V WP ESC ...
Art.nr: 010-0155-08
Copied
  MAMBA X, 25.2V WP ESC AND 1406-1900KV SENSORED CRAWLER COMBO The Mamba X Crawler edition is our latest offering for the crawling crowd. We have taken our new 1406 low kv crawler motors and paired it with the high power, ultra reliable Mamba X ESC. This combo is ideal for low speed crawling or trail running in vehicles weighing up to 4kg on 3s or 4s; it can also be used in more aggressive setups like rock racing and extended hill climbing on vehicles up to 2.2kg. Your ESC will come with our new V2.02 firmware that has been enhanced for rock crawling and sensored operation.   Waterproof: Yes Telemetry Capable: Yes Data Logging: Yes Auxiliary Wire: Yes Minimum Input Voltage: 2S Maximum Input Voltage: 4S Sensored Capable: Yes Features: INPUT VOLTAGE RANGE OF 2S-4S (with included motor) with an internal 8A ADJUSTABLE BEC (5.25V-8.0V) Housed in a RUGGED CNC-MACHINED ALUMINUM CASE and potted in WATERPROOF epoxy to withstand the most extreme driving conditions and environments. Removable 30MM COOLING FAN Recon G6 Certified Paired with the improved 4-POLE 12-SLOT SENSORED1406-1900KV SLATE motor provides precise throttle control and buttery smooth starts Convenient TRANSMITTER PROGRAMMING for six common adjustable settings. Access to Castle’s INDUSTRY LEADING SOFTWARE with use of Castle Link USB (coupon included for free USB with purchase) and freely downloadable Castle-Link Windows™ program , or the Castle Link iOS App and a B-LINK™ Bluetooth Adapter (sold separately) for anytime, anywhere system adjustments. Click here to see the Mamba X Castle Link Settings Overview. Firmware updates available with use of Castle Link USB and Castle Link Programming Suite. DATA LOGGING captures and records performance data for maximum optimization of both performance and battery life AUXILIARY WIRE FUNCTIONALITY allows for “on-the-fly” adjustments such as ROCK RACE/CRAWLER MODE. These adjustments can be made real time, while driving, right from your transmitter. Castle’s SMARTSENSE™ software, enabled by default in the Castle Link Programming Suite, will use the motor’s sensors to provide smooth starts, excellent torque, and low-speed drivability. Once the motor is turning, it seamlessly transitions to Castle’s ULTRA-EFFICIENT sensorless mode with ELECTRONIC TIMING. Smooth sensored startups and high-efficiency sensorless running makes the Mamba X system produce more power and less heat. QUIETSENSE™ is an innovative advancement in the design of sensored motors to deliver the highest precision and most efficient startup. Mamba X ESC features AUDIBLE ALERTS that will notify you of possible issues with calibrations and error conditions to help diagnose problems in the field. Mamba X is TELEMETRY READY which means owners of the Futaba T4PX or 7PX Transmitters will be able to purchase the Castle Creations Telemetry Link for S.BUS2. Real-time data such as ESC temperature, voltages and RPM can be monitored to ensure performance advantages and spare you the “unknown” parameters that all R/C enthusiasts experience at some point. Telemetry data provides another level of protection and can increase performance. SMARTSENSE™ Enabled by default, the Mamba X uses the motor’s sensors to provide smooth starts, excellent torque, and low-speed drivability. Once the motor is turning, it seamlessly transitions to Castle’s ULTRA-EFFICIENT sensorless mode with electronic timing. When running, a motor must transition between different load points and a different timing advance is required for optimal efficiency at each. Electronic timing in SMARTSENSE™ will advance timing automatically for peak performance during all driving conditions. This combines the best of both worlds in an unrivaled HYBRID between smooth sensored startups and high-efficiency sensorless running. Your motor will produce more power and less heat. AUXILIARY WIRE FUNCTIONALITY The Mamba X allows “on-the-fly” adjustments to be made through the AUX wire once enabled in Castle Link. Once you have selected an AUX wire function, that setting can then be tuned from your transmitter while driving. Torque control, max throttle, max brake and drag brake adjustments are a sampling of the available modes. This real-time tuning allows you to quickly and easily fine-tune your system. DATALOGGING Enabled by default, the Mamba X captures and records performance data from your vehicle. This allows you to view a detailed turn-by-turn record of what your ESC actually experienced during the run. You will be able to record real-time data such as motor RPM, battery current and voltage, ESC and motor temperature, throttle input, and more. Download and analyze the collected data via Castle Link and make adjustments to maximize both performance and battery life. CASTLE LINK™ For nearly 20 years Castle engineers have been setting the bar for industry leading software functionality. The Castle Link Programming Suite is your ticket to creating the perfect setup. To gain access to the host of tuning parameters, simply redeem the coupon for the Castle Link adapter included with your Mamba X purchase. Download the simple to install software from our website and you are ready to personalize your controller’s parameters. Don’t forget to use the “check for updates” feature in Castle Link to download new software as it becomes available. New features are yours at no cost, a perk for choosing Castle. ESC Technical Specs: Input Voltage Range: MIN: 2S LiPo - MAX: 6S LiPo (25.2V) - Note that with the included motor it's max 4s BEC Specifications: Adjustable: 5.5V, 6.0V, 7.5V. or 8.0V (8A Peak), default 5.5V Operating Environment: Waterproof* design allows for use in nearly any environment. Brake: Proportional Reversible: Yes, but may be disabled for racing. On/Off Switch: Yes Cooling Fan: Yes, factory equipped (30 mm), fully removable** Length: 54.4 mm Width: 35.2 mm Height: 30 mm Weight (with wires): 101 g Connectors: 4.0 mm female bullets for motor connection Items Needed for Operation: Battery Connector required, Castle 6.5mm Polarized Connectors, Castle 4.0mm Polarized Connectors, Traxxas® Power Connectors, or Deans® Ultra Plugs are recommended. Product Use Statements: *Although Mamba X is waterproof, it is not intended for operation while completely submerged in liquid. Always rinse the ESC and motor with clean water after exposure to corrosives or dirt. While the motor and controller may be waterproof, we suggest users confirm that the rest of their vehicle, including the batteries, servos, radio and chassis are also waterproof before exposing them to liquids of any kind. **The cooling fan must be removed prior to driving in wet conditions. It is not waterproof.   Application Guidelines: Intended for up to 6S (25.2 Volt) operation in vehicles weighing less than 4kg Recommended Motors: Castle 1406, 1410 and 1415 Sensored motors Max. Recommended Vehicle Weight: Less than 4kg with batteries & ready-to-run Programmability: Fully programmable Castle feature set using Castle Link USB adapter (coupon for free link included in package) and freely downloadable Castle Link Windows software. Telemetry Link Capable: Yes 1406-1900KV Motor Technical Specs: Input Voltage Range: 2-4S LiPo Kv: 1900 Max. RPM: 100,000 Length: 49.5 mm Diameter: 36 mm Weight (w/wires): 197 g Shaft Length: 15 mm Shaft Diameter: 1/8" (3.17 mm) Mounting Hole Specifications: M3 @ 25 mm spacing Cooling Fan: Optional Connectors: 4 mm male Castle Bullet Connectors Application Guidelines: Ideal for 1/10 scale low speed rock crawlers/trail runners on 3S-4S weighing less than 4kg. Can also be used in more aggressive setups in lighter 1/10 scale touring cars, stadium trucks or buggies weighing up to 2.2kg. Please refer to our Gearing Chart for recommended motor, battery and gearing for some of the more popular vehicles on the market. Tech Notes:      Running modes: SMARTSENSE™, Sensored, Sensorless Package Includes: Mamba X Electronic Speed Controller 1406-1900kv sensored brushless motor 210mm length sensor wire (for sensored operation) Castle Sensor Harness adapter Driver's Ed and Quick Start Guides Castle decal sheet

3.795,-

4.195,-

KJØP
-10%
Hovedbilde Castle Creations 010015510 Mamba X 25.2V WP ESC ... Hovedbilde Castle Creations 010015510 Mamba X 25.2V WP ESC ...
Castle Creations 010015510 Mamba X 25.2V WP ESC ...
Art.nr: 010-0155-10
Copied
  MAMBA X, 25.2V WP ESC AND 1406-2850KV SENSORED CRAWLER COMBO The Mamba X Crawler edition is our latest offering for the crawling crowd. We have taken our new 1406 low kv crawler motors and paired it with the high power, ultra reliable Mamba X ESC. This combo is ideal for low speed crawling or trail running in vehicles weighing up to 4kg on 3s or 4s; it can also be used in more aggressive setups like rock racing and extended hill climbing on vehicles up to 2.2kg. Your ESC will come with our new V2.02 firmware that has been enhanced for rock crawling and sensored operation.   Waterproof: Yes Telemetry Capable: Yes Data Logging: Yes Auxiliary Wire: Yes Minimum Input Voltage: 2S Maximum Input Voltage: 3S Sensored Capable: Yes Features: INPUT VOLTAGE RANGE OF 2S-3S (with included motor) with an internal 8A ADJUSTABLE BEC (5.25V-8.0V) Housed in a RUGGED CNC-MACHINED ALUMINUM CASE and potted in WATERPROOF epoxy to withstand the most extreme driving conditions and environments. Removable 30MM COOLING FAN Recon G6 Certified Paired with the improved 4-POLE 12-SLOT SENSORED1406-1900KV SLATE motor provides precise throttle control and buttery smooth starts Convenient TRANSMITTER PROGRAMMING for six common adjustable settings. Access to Castle’s INDUSTRY LEADING SOFTWARE with use of Castle Link USB (coupon included for free USB with purchase) and freely downloadable Castle-Link Windows™ program , or the Castle Link iOS App and a B-LINK™ Bluetooth Adapter (sold separately) for anytime, anywhere system adjustments. Click here to see the Mamba X Castle Link Settings Overview. Firmware updates available with use of Castle Link USB and Castle Link Programming Suite. DATA LOGGING captures and records performance data for maximum optimization of both performance and battery life AUXILIARY WIRE FUNCTIONALITY allows for “on-the-fly” adjustments such as ROCK RACE/CRAWLER MODE. These adjustments can be made real time, while driving, right from your transmitter. Castle’s SMARTSENSE™ software, enabled by default in the Castle Link Programming Suite, will use the motor’s sensors to provide smooth starts, excellent torque, and low-speed drivability. Once the motor is turning, it seamlessly transitions to Castle’s ULTRA-EFFICIENT sensorless mode with ELECTRONIC TIMING. Smooth sensored startups and high-efficiency sensorless running makes the Mamba X system produce more power and less heat. QUIETSENSE™ is an innovative advancement in the design of sensored motors to deliver the highest precision and most efficient startup. Mamba X ESC features AUDIBLE ALERTS that will notify you of possible issues with calibrations and error conditions to help diagnose problems in the field. Mamba X is TELEMETRY READY which means owners of the Futaba T4PX or 7PX Transmitters will be able to purchase the Castle Creations Telemetry Link for S.BUS2. Real-time data such as ESC temperature, voltages and RPM can be monitored to ensure performance advantages and spare you the “unknown” parameters that all R/C enthusiasts experience at some point. Telemetry data provides another level of protection and can increase performance. Additional features are continued in FEATURES tab. Additional specifications continued in SPECIFICATIONS tab. SMARTSENSE™ Enabled by default, the Mamba X uses the motor’s sensors to provide smooth starts, excellent torque, and low-speed drivability. Once the motor is turning, it seamlessly transitions to Castle’s ULTRA-EFFICIENT sensorless mode with electronic timing. When running, a motor must transition between different load points and a different timing advance is required for optimal efficiency at each. Electronic timing in SMARTSENSE™ will advance timing automatically for peak performance during all driving conditions. This combines the best of both worlds in an unrivaled HYBRID between smooth sensored startups and high-efficiency sensorless running. Your motor will produce more power and less heat. AUXILIARY WIRE FUNCTIONALITY The Mamba X allows “on-the-fly” adjustments to be made through the AUX wire once enabled in Castle Link. Once you have selected an AUX wire function, that setting can then be tuned from your transmitter while driving. Torque control, max throttle, max brake and drag brake adjustments are a sampling of the available modes. This real-time tuning allows you to quickly and easily fine-tune your system. DATALOGGING Enabled by default, the Mamba X captures and records performance data from your vehicle. This allows you to view a detailed turn-by-turn record of what your ESC actually experienced during the run. You will be able to record real-time data such as motor RPM, battery current and voltage, ESC and motor temperature, throttle input, and more. Download and analyze the collected data via Castle Link and make adjustments to maximize both performance and battery life. CASTLE LINK™ For nearly 20 years Castle engineers have been setting the bar for industry leading software functionality. The Castle Link Programming Suite is your ticket to creating the perfect setup. To gain access to the host of tuning parameters, simply redeem the coupon for the Castle Link adapter included with your Mamba X purchase. Download the simple to install software from our website and you are ready to personalize your controller’s parameters. Don’t forget to use the “check for updates” feature in Castle Link to download new software as it becomes available. New features are yours at no cost, a perk for choosing Castle. ESC Technical Specs: Input Voltage Range: MIN: 2S LiPo - MAX: 6S LiPo (25.2V) - Note that with the included motor it's max 3s BEC Specifications: Adjustable: 5.5V, 6.0V, 7.5V. or 8.0V (8A Peak), default 5.5V Operating Environment: Waterproof* design allows for use in nearly any environment. Brake: Proportional Reversible: Yes, but may be disabled for racing. On/Off Switch: Yes Cooling Fan: Yes, factory equipped (30 mm), fully removable** (see Product Use Statements below) Length: 54.4 mm Width: 35.2 mm Height: 30 mm Weight (with wires): 101 g Connectors: 4.0 mm female bullets for motor connection Items Needed for Operation: Battery Connector required, Castle 6.5mm Polarized Connectors, Castle 4.0mm Polarized Connectors, Traxxas® Power Connectors, or Deans® Ultra Plugs are recommended. Product Use Statements: *Although Mamba X is waterproof, it is not intended for operation while completely submerged in liquid. Always rinse the ESC and motor with clean water after exposure to corrosives or dirt. While the motor and controller may be waterproof, we suggest users confirm that the rest of their vehicle, including the batteries, servos, radio and chassis are also waterproof before exposing them to liquids of any kind. **The cooling fan must be removed prior to driving in wet conditions. It is not waterproof.   Application Guidelines: Intended for up to 6S (25.2 Volt) operation in vehicles weighing less than 9bs/4kg Recommended Motors: Castle 1406, 1410 and 1415 Sensored motors Max. Recommended Vehicle Weight: Less than 4kg with batteries & ready-to-run Programmability: Fully programmable Castle feature set using Castle Link USB adapter (coupon for free link included in package) and freely downloadable Castle Link Windows software. Telemetry Link Capable: Yes 1406-2850KV Motor Technical Specs: Input Voltage Range: 2-4S LiPo Kv: 2850 Max. RPM: 100,000 Length: 49.5 mm Diameter: 36 mm Weight (w/wires): 197 g Shaft Length: 15 mm Shaft Diameter: 1/8" (3.17 mm) Mounting Hole Specifications: M3 @ 25 mm spacing Cooling Fan: Optional - Coming Soon Connectors: 4 mm male Castle Bullet Connectors Items Needed for Operation: Compatible Electronic Speed Control (ESC) Application Guidelines: Ideal for 1/10 scale rock crawlers & trail rigs on 2S-4S and low speed setups on 1/10 scale touring cars, stadium trucks or buggies on 2-4S with apropriate gearing. Recommended ESC(s): Mamba Max Pro, Mamba X & Mamba Micro X Tech Notes:      Running modes: SMARTSENSE™, Sensored, Sensorless Package Includes: Mamba X Electronic Speed Controller 1406-2850kv sensored brushless motor 210mm length sensor wire (for sensored operation) Castle Sensor Harness adapter Driver's Ed and Quick Start Guides Castle decal sheet

3.795,-

4.195,-

KJØP
-10%
Hovedbilde Castle Creations 010016201 Mamba Micro X 12,6V ...
Castle Creations 010016201 Mamba Micro X 12,6V ...
Art.nr: 010-0162-01
Copied
Castle Mamba Micro-X Crawler Edition ESC with 1406-1900KV Sensored Motor Combo Putting the X in Extreme! The Mamba Micro X Crawler edition is our latest offering for the crawling crowd. We have taken our new 1406 low kv crawler motors and paired it with the lightweight, small footprint Mamba Micro X ESC. This combo is ideal for low speed crawling or trail running in vehicles weighing up to 3.6kg on 2s or 3s; it can also be used in slightly more aggressive setups like rock racing and extended hill climbing on vehicles up to 1.8kg. If you're looking for a more aggressive setup in a heavier rig, like rock racing and extended hill climbing, we recommend you run the Mamba X ESC with the same motor. Your ESC will come with our new V2.02 firmware that has been enhanced for rock crawling and sensored operation. Use of an external BEC is recommended if running a high power or digital servo.   Waterproof : Yes Telemetry Capable : Yes Data Logging : No Auxiliary Wire : Yes Minimum Input Voltage : 2S Maximum Input Voltage : 3S Sensored Capable : Yes This SPECIAL EDITION of the Mamba Micro X includes solder posts with 16 AWG wire for the motor connection; it also includes the matching 4mm female bullets to pair with the included 1406-1900kv sensored brushless motor. The Auxiliary Advantage Mamba Micro X features the addition of a new, programmable Auxiliary Wire that allows you to make “on-the-go” adjustments to several settings such as torque control, and max throttle, and fine-tune the performance of your ESC right from the transmitter using an auxiliary channel on the receiver. The AUX wire function is disabled by default but is programmable via Castle Link. Once you have programmed the functionality of the AUX wire, that setting can then be adjusted on-the-go from a compatible transmitter. Try out the brand new Crawler Mode for incredible versatility! Telemetry Capability The Mamba Micro X is telemetry ready, which means owners of Futaba T4PX or 7PX Transmitters will be able to purchase the Castle Telemetry Link for S.BUS2. Real-time data such as ESC temperature, voltages, and RPM can be monitored to ensure performance advantages and spare you the “unknown” parameters that all R/C enthusiasts experience at some point. Telemetry data provides another level of protection and can increase performance. Package Includes: Crawler Edition Mamba Micro X w/solder posts 1406-1900kv sensored brushless motor 210mm length sensor wire (for sensored operation) Castle Sensor Harness adapter Driver's Ed and Quick Start Guides Castle decal sheet ESC Technical Specs: Input Voltage Range: MIN: 2S LiPo - MAX: 3S LiPo (12.6V) BEC Specifications: Adjustable: 5.5V or 7.5V (2A Peak), default 5.5V. Use of external BEC is recommended if using a high torque/speed digital servo; the CC BEC or CC BEC 2.0 Waterproof are recommended Operating Environment: Waterproof* design allows for use in nearly any environment Brake: Proportional Reversible: Yes, but can be disabled for racing On/Off Switch: Yes, waterproof* Cooling Fan: No Length: 41mm Width: 19mm 28mm Weight (without wires): 34g Connectors: 4mm male Castle Bullet Connectors attached to replaceable 16 gauge wire; includes Castle sensor harness. Items Needed for Operation: Battery Connector required, Castle 4mm polarized Connectors, T- Plugs, or Traxxas Power Connect are recommended. Product Use Statements: Applying voltages higher than 12.6 volts will cause irreparable damage to your controller, voiding your warranty. Recommended battery capacity is at least 1500mAh and 25C. Castle recommends running the highest mAh that will fit in your vehicle and the highest C rating you can afford. The Crawler Edition Mamba Micro X has solder posts for the motor connections; includes 13 gauge wire with 4mm female bullets that connect directly to the included 1406-1900kv motors and the battery input wires are bare. You must solder the connector to the wires on the ESC. See Items Needed for Operation for recommendations. Application Guidelines: Low speed crawling or trail running in vehicles weighing up to 3.6kg. If you're looking for a more aggressive setup, like rock racing and extended hill climbing it is recommend to run the Mamba X ESC with the same motor. Recommended Motors: Combo includes 1406-1900kv sensored brushless motor. Max. Recommended Vehicle Weight: 3.6kg when used for low speed/moderate driving style; 1.8kg for more aggressive driving styles. Programmability: Fully programmable Castle feature set using Castle Link USB adapter and freely downloadable Castle Link Windows software. Telemetry Link Capable: Yes Tech Notes: *Not intended for operation while submerged in liquid. If unit is operated in wet conditions, rinse with fresh water to remove dirt or corrosives, then fully dry unit. Motor specs: Input Voltage Range: 2S-3S LiPo Kv: 1900 Max. RPM: 100,000 Length: 49.5mm Diameter: 36mm Weight (w/wires): 197g Shaft Length: 15mm Shaft Diameter: 1/8" (3.17mm) Optional 5mm rotor replacement available Mounting Hole Specifications: M3 @ 25mm Cooling Fan: Optional - Coming Soon Connectors: 4mm male Castle Bullet Connectors attached to replaceable 13 gauge wire; includes 210mm length sensored wire. Application Guidelines: Ideal for 1/10 scale low speed rock crawlers/trail runners on 3S-4S weighing less than 3.6kg. It can also be used in more aggressive setups in lighter 1/10 scale touring cars, stadium trucks or buggies weighing up to 2.2kg Max. Recommended Vehicle Weight: 3.6kg when used for low speed/moderate driving style like rock crawling and trail running; 1.8kg for more racing and aggressive driving styles. Tech Notes: Running modes: SMARTSENSE™, Sensored, Sensorless with Castle sensored capable ESCs. Water Resistant Design: The sensor board is coated with silicone conformal coating to protect the sensors from moisture. The sensor connections are not water resistant; water can cause signal loss which could result in loss of sensored capabilities. Castle recommended applying dielectric grease to the outside of the sensor wire connections after installation of the wire. Routine maintenance is recommended after running in wet conditions. Please refer to this document for running and maintaining motors in wet environments.

2.395,-

2.595,-

KJØP
-8%
Hovedbilde Castle Creations 010015000 1/18 Sidewinder Micro 2 ESC
Castle Creations 010015000 1/18 Sidewinder Micro 2 ESC
Art.nr: 010-0150-00
Copied
Micro size, mega control The Sidewinder Micro, Castle's popular and affordable Micro controller, has been revamped. Users will notice big advancements in start-up and performance, thanks to the updated circuitry. The BEC functionality has been upgraded (adjustable at 5.5V or 7.5V) as well as the addition of new audible alert tones for easy detection of common setup problems. The ESC is available individually, or in combination with one of Castle's 0808 4 Pole Sensorless Brushless Motors. The Sidewinder Micro 2 is ideal for 1/18 scale RC hobby vehicles weighing up to 2lbs. Adjustable BEC–5.5V(default) or 7.5V (2A Peak) Programmable via transmitter, Windows© based PC and a Castle Link USB adapter (sold separately), or a Field Link card (purchased separately). Input Voltage Range–Minimum: 2S LiPo, Max: 3S LiPo, 12.6V Plenty of programmable features including torque limit, punch control, motor type (brushless or brushed), forward/reverse speed limiting and more! This is the 1/18 scale Castle Creations Sidewinder 2 Micro Electronic Speed Control. FEATURES For 1/18 scale radio controlled vehicles weighing up to 2lbs (907g) May be powered by 2S-3S LiPo, or 4-9 cell NiMH cells Alert tones for start fail, voltage cutoff, radio glitch, over-temperature, over-current and excessive load detections Adjustable for 5.5V-7.5V operation Link Live enables controller to communicate real-time telemetry data such as battery voltage, ESC temperature, motor power output and battery ripple (Requires purchase of Castle S.BUS2 Telemetry Link) Manual programming settings include Brake/Reverse Type, Voltage Cutoff, Brake Amount, Drag Brake, and motor type Updated circuitry and refined software for ultra-smooth starts INCLUDES Sidewinder 2 Micro ESC, Motor Leads with 3.5mm bullet connectors REQUIREMENTS High-current battery connector rated for at least 40A SPECIFICATIONS Input Voltage: 2S-3S LiPo, 4-9 cell NiMH BEC Specifications: Adjustable: 5.5V or 7.5V (2A Peak), default 5.5V Size: 0.87 x 1.5" (22 x 38mm) Weight: 0.92oz (26g) with wires

1.199,-

1.249,-

KJØP
-4%
Hovedbilde Castle Creations MAMBA X 3.17mm SCT, SENSORED, 25.2V ...
Castle Creations MAMBA X 3.17mm SCT, SENSORED, 25.2V ...
Art.nr: 010-0155-12
Copied
Castle Creations MAMBA X SCT, SENSORED, 25.2V WP ESC AND 1412-3200KV COMBO Meet the next generation. Castle Creations is proud to announce our new flagship surface product, the MAMBA X EXTREME 1:10 SCALE WATERPROOF ESC. We at Castle wanted to address three main concepts while designing a new ESC for the modern day RC enthusiast; VERSATILITY, RELIABILITY, and PERFORMANCE. These are the pillars of the Mamba X design and the driving forces behind the feature-packed controller. The Mamba X is extremely versatile, capable of powering a wide variety of applications ranging from 2S to 6S and vehicles ranging from 1/10th scale to 1/8th scale*.The Mamba X with 1412-3200Kv sensored motor is perfect for 2WD and 4x4 short course trucks, monster trucks and rock racers running up to 3s LiPo and weighing up to 6.5 lbs; it can be run on a 4s LiPo with very conservative gearing and keep a close eye on temperatures. It is a cooling running torque animal for lighter 1/10th scale 2WD stadium trucks and buggies running up to a 4s LiPo. FEATURES: ESC voltage range 2S-6S (4s max with included motor) 1412-3200Kv Sensored Motor Waterproof 8A Adjustable BEC (5.25V-8.0V) Data-logging Rugged CNC Aluminum Case Castle Link Programming Support Convenient Transmitter Programming Auxiliary Wire Functionality for "on-the-fly" adjustments SmartSense™Technology Integrated Capacitors Removable 30mm Cooling Fan Integrated 4mm Bullet Connectors 12 AWG Power Wires Waterproof Switch Audible Alerts and LED Alerts for easy diagnoses of common issues ROAR Certified ESC RECON G6 Certified ESC   MAMBA X ESC 1412-3200 COMBO COMES WITH: Mamba X ESC with Sensor Harness 1412-3200Kv 4-pole 12-slot sensored motor Coupon for free Castle Link USB Mamba Decals Driver's Ed and Quick Start Guide Gearing Chart for Castle Motors *In 1/8th scale setups, the Mamba X is intended to be used for off-road racing in buggies weighing up to 9 lbs (including batteries and ready-to-run). In these 1/8th scale racing setups, the Mamba X should be run at 4S Lipo (16.8V) max and is recommended to be paired with the Castle 1512-1800Kv (P/N: 060-0062-00) or Castle 1515-2200Kv (P/N: 060-0063-00) motor, with appropriate gearing only.   ESC Technical Specs Input Voltage Range: MIN: 2S LiPo MAX: 6S LiPo (25.2V) (4s maximum with included 1412 - 3200kv motor) BEC Specifications: Adjustable: 5.5V, 6.0V, 7.5V. or 8.0V (8A Peak), default 5.5V Operating Environment: Waterproof* design allows for use in nearly any environment. Brake: Proportional Reversible: Yes, but may be disabled for racing. On/Off Switch: Yes Cooling Fan: Yes, factory equipped (30mm), fully removable** (see Product Use Statements below) Size: Length: 2.14" (54.4mm) Width: 1.39" (35.2mm) Height: 1.18" (30.0mm) Weight (with wires): 3.56 oz. (101g) Connectors: 4.0mm female bullets for motor connection. Items Needed for Operation: Battery Connector required, Castle 6.5mm Polarized Connectors, Castle 4.0mm Polarized Connectors, Traxxas® Power Connectors, or Deans® Ultra Plugs are recommended. Product Use Statements: *Although Mamba X is waterproof, it is not intended for operation while completely submerged in liquid. T Always rinse the ESC and motor with clean water after exposure to corrosives or dirt. While the motor and controller may be waterproof, we suggest users confirm that the rest of their vehicle, including the batteries, servos, radio and chassis are also waterproof before exposing them to liquids of any kind. **The cooling fan must be removed prior to driving in wet conditions. It is not waterproof. Max. Recommended Vehicle Weight: Up to 6.5lbs with included 1412 - 3200kv sensored motor. Programmability: Fully programmable Castle feature set using Castle Link USB adapter (coupon for free link included in package) and freely downloadable Castle Link Windows software. Telemetry Link Capable: Yes Tech Notes: Mamba X setups frequently hit 100+ amps in peaks and not all LiPos are created equal. Surge ratings should never be used to determine a pack's suitability for a brushless application. Recommended battery capacity for 1:8th scale vehicles is 5000mAh. We recommend using 30C continuous discharge or higher LiPo batteries (or high quality 25C batteries such as Traxxas® Power Cell). Our experience suggests using only mild gear ratios with NiMH cells. Do not attempt to use NiMH cells in extreme setups. Applying voltages higher than 25.2V will cause irreparable damage to ESC. We recommend a high-current connector designed for high-powered electric systems, rated for 70+ amps. Invest in connector sets made for high-powered electric systems such as our Castle 6.5mm Polarized Connectors, Castle 4.0mm Polarized Connectors, Traxxas® Power Connectors, or Deans® Ultra Plugs. Motor Technical Specs Input Voltage Range: 2-4S LiPo Kv: 3200 Max. RPM: 75,000 Size: Length: 62.5mm Diameter: 36mm Weight (w/wires): 265.4g / 9.4oz Shaft Size: Length: 15.5mm Diameter: 1/8" (3.17mm) Mounting Hole Specifications: M3 @ 25mm Cooling Fan: Optional, coming soon! Connectors: 4mm male Castle Bullet Connectors Application Guidelines: Ideal for 2WD and 4x4 short course trucks, monster trucks and rock racers running up to 3s LiPo and weighing up to 6.5 lbs; it can be run on a 4s LiPo with very conservative gearing and keep a close eye on temperatures. It is a cooling running torque animal for lighter 1/10th scale 2WD stadium trucks and buggies running up to a 4s LiPo. Recommended ESC(s): Combo includes Mamba X ESC. Max. Recommended Vehicle Weight: See application guidelines Tech Notes: Running modes: SMARTSENSE™, Sensored only Water Resistant Design: The sensor board is coated with silicone conformal coating to protect the sensors from moisture. The sensor connections are not water resistant; water can cause signal loss which could result in loss of sensored capabilities. Castle recommended applying dielectric grease to the outside of the sensor wire connections after installation of the wire. Routine maintenance is recommended after running in wet conditions.    Product Features Data-Logging Enabled by default, the Mamba X captures and records performance data from your vehicle. This allows you to view a detailed turn-by-turn record of what your ESC actually experienced during the run. You will be able to record real-time data such as motor RPM, battery current and voltage, ESC and motor temperature, throttle input, and more. Download and analyze the collected data via Castle Link and make adjustments to maximize both performance and battery life. You can use the Quick Connect Duo (sold separately) to allow you to access both wires into a single Castle Link connection.  Auxiliary Functionality: The Mamba X allows “on-the-fly” adjustments to be made through the AUX wire once enabled in Castle Link. Once you have selected an AUX wire function, that setting can then be tuned from your transmitter while driving. Torque control, max throttle, max brake and drag brake adjustments are a sampling of the available modes. This real-time tuning allows you to quickly and easily fine-tune your system. Programmability: For over 20 years Castle engineers have been setting the bar for industry leading software functionality. The Castle Link Programming Suite is your ticket to creating the perfect setup. To gain access to the host of tuning parameters, simply redeem the coupon for the Castle Link adapter included with your Mamba X purchase or download the Castle Link iOS App and purchase the B-Link Bluetooth Adapter. Download the simple to install software from our website and you are ready to personalize your controller’s parameters. Don’t forget to use the “check for updates” feature in Castle Link to download new software as it becomes available. New features are yours at no cost, a perk for choosing Castle.  Firmware Updates: Users will receive free access to all firmware updates, including added features sets using the Castle Link USB Programming Kit or the Castle Link iOS App and a B-Link Bluetooth Adapter.  Advanced Technology When paired with a Castle 4-POLE 12-SLOT SENSORED MOTOR SMARTSENSE™ software, enabled by default in the Castle Link Programming Suite, will use the motor’s sensors to provide smooth starts, excellent torque, and low-speed drivability.  Once the motor is turning, it seamlessly transitions to Castle’s ULTRA-EFFICIENT sensorless mode with ELECTRONIC TIMING. Smooth sensored startups and high-efficiency sensorless running makes the Mamba X system produce more power and less heat. QUIETSENSE™ is an innovative advancement in the design of sensored motors to deliver the highest precision and most efficient startup. Power System Alerts: Mamba X also features updated Audible Alerts that will notify you of possible issues with calibrations and error conditions to help diagnose problems in the field. Telemetry Ready: Mamba X is telemetry ready, which means owners of Futaba T4PX Transmitters will be able to purchase the Castle Creations Telemetry Link for S.BUS2. Real-time data such as ESC temperature, voltages, and RPM can be monitored to ensure performance advantages and spare you the “unknown” parameters that all R/C enthusiasts experience at some point. Telemetry data provides another level of protection and can increase performance. Rugged and Element Proof: Housed in a rugged CNC-machined aluminum case and then potted in waterproof epoxy. This not only protects the electronics but ensures any heat generated in the controller can easily be dissipated through the case. Powerful Integrated BEC: The high performance Mamba X includes an integrated and powerful 8A adjustable BEC and can push the most extreme 1/10th scale setups and 1/8th scale* race buggies.   *In 1/8th scale setups, the Mamba X is intended to be used for off-road racing in buggies weighing up to 9 lbs (including batteries and ready-to-run). In these 1/8th scale racing setups, the Mamba X should be run at 4S Lipo (16.8V) max and is recommended to be paired with the Castle 1512-1800Kv (P/N: 060-0062-00) or Castle 1515-2200Kv (P/N: 060-0063-00) motor, with appropriate gearing only. Castle Link Compatible With the Castle Link USB Programming Kit you can use your Windows™ PC to easily program your controller. Castle Link includes all code for all Castle Link compatible hobby products in one convenient download.   Adjustable settings include: Throttle Braking curve Drag brake Auto LiPo cutoff Punch Control Reverse Type Motor Type Additional Castle Link benefits include: Access expanded programming and custom parameters for Castle controllers Access to all firmware updates, including added features sets released from Castle Engineering, at no charge. Intuitive Demo Mode capability Ability to default ESC to factory settings Ability to save setup profiles for later use Ability to download and view data logs (on applicable controllers)

3.795,-

3.995,-

KJØP
-5%
Hovedbilde Castle Creations MAMBA X SCT, SENSORED, 25.2V WP ESC ...
Castle Creations MAMBA X SCT, SENSORED, 25.2V WP ESC ...
Art.nr: 010-0155-14
Copied
Castle Creations MAMBA X SCT, SENSORED, 25.2V WP ESC AND 1412-2100KV COMBO Meet the next generation. Castle Creations is proud to announce our new flagship surface product, the MAMBA X EXTREME 1:10 SCALE WATERPROOF ESC. We at Castle wanted to address three main concepts while designing a new ESC for the modern day RC enthusiast; VERSATILITY, RELIABILITY, and PERFORMANCE. These are the pillars of the Mamba X design and the driving forces behind the feature-packed controller. The Mamba X is extremely versatile, capable of powering a wide variety of applications ranging from 2S to 6S and vehicles ranging from 1/10th scale to 1/8th scale*. The Mamba X with 1412-2100Kv sensored motor is perfect for 2WD and 4x4 short course trucks, monster trucks and rock racers running up to 4s LiPo and weighing up to 6.5 lbs. It is a cooling running torque animal for lighter 1/10th scale 2WD stadium trucks and buggies running up to a 4s LiPo.   FEATURES: ESC voltage range 2S-6S (4s max with included motor) 1412-2100Kv Sensored Motor Waterproof 8A Adjustable BEC (5.25V-8.0V) Data-logging Rugged CNC Aluminum Case Castle Link Programming Support Convenient Transmitter Programming Auxiliary Wire Functionality for "on-the-fly" adjustments SmartSense™Technology Integrated Capacitors Removable 30mm Cooling Fan Integrated 4mm Bullet Connectors 12 AWG Power Wires Waterproof Switch Audible Alerts and LED Alerts for easy diagnoses of common issues ROAR Certified ESC RECON G6 Certified ESC MAMBA X ESC 1412-3200 COMBO COMES WITH: Mamba X ESC with Sensor Harness 1412-2100Kv 4-pole 12-slot sensored motor Coupon for free Castle Link USB Mamba Decals Driver's Ed and Quick Start Guide Gearing Chart for Castle Motors *In 1/8th scale setups, the Mamba X is intended to be used for off-road racing in buggies weighing up to 9 lbs (including batteries and ready-to-run). In these 1/8th scale racing setups, the Mamba X should be run at 4S Lipo (16.8V) max and is recommended to be paired with the Castle 1512-1800Kv (P/N: 060-0062-00) or Castle 1515-2200Kv (P/N: 060-0063-00) motor, with appropriate gearing only. ESC Technical Specs Input Voltage Range: MIN: 2S LiPo MAX: 6S LiPo (25.2V) (4s maximum with included 1412 - 2100kv motor) BEC Specifications: Adjustable: 5.5V, 6.0V, 7.5V. or 8.0V (8A Peak), default 5.5V Operating Environment: Waterproof* design allows for use in nearly any environment. Brake: Proportional Reversible: Yes, but may be disabled for racing. On/Off Switch: Yes Cooling Fan: Yes, factory equipped (30mm), fully removable** (see Product Use Statements below) Size: Length: 2.14" (54.4mm) Width: 1.39" (35.2mm) Height: 1.18" (30.0mm) Weight (with wires): 3.56 oz. (101g) Connectors: 4.0mm female bullets for motor connection. Items Needed for Operation: Battery Connector required, Castle 6.5mm Polarized Connectors, Castle 4.0mm Polarized Connectors, Traxxas® Power Connectors, or Deans® Ultra Plugs are recommended. Product Use Statements: *Although Mamba X is waterproof, it is not intended for operation while completely submerged in liquid. T Always rinse the ESC and motor with clean water after exposure to corrosives or dirt. While the motor and controller may be waterproof, we suggest users confirm that the rest of their vehicle, including the batteries, servos, radio and chassis are also waterproof before exposing them to liquids of any kind. **The cooling fan must be removed prior to driving in wet conditions. It is not waterproof. Max. Recommended Vehicle Weight: Up to 6.5lbs with included 1412 - 3200kv sensored motor. Telemetry Link Capable: Yes Tech Notes: Mamba X setups frequently hit 100+ amps in peaks and not all LiPos are created equal. Surge ratings should never be used to determine a pack's suitability for a brushless application. Recommended battery capacity for 1:8th scale vehicles is 5000mAh. We recommend using 30C continuous discharge or higher LiPo batteries (or high quality 25C batteries such as Traxxas® Power Cell). Our experience suggests using only mild gear ratios with NiMH cells. Do not attempt to use NiMH cells in extreme setups. Applying voltages higher than 25.2V will cause irreparable damage to ESC. We recommend a high-current connector designed for high-powered electric systems, rated for 70+ amps. Invest in connector sets made for high-powered electric systems such as our Castle 6.5mm Polarized Connectors, Castle 4.0mm Polarized Connectors, Traxxas® Power Connectors, or Deans® Ultra Plugs. Motor Technical Specs Input Voltage Range: 2-4S LiPo Kv: 2100 Max. RPM: 75,000 Size: Length: 62.5mm Diameter: 36mm Weight (w/wires): 265.4g / 9.4oz Shaft Size: Length: 15.5mm Diameter: 1/8" (3.17mm) Mounting Hole Specifications: M3 @ 25mm Cooling Fan: Optional, coming soon! Connectors: 4mm male Castle Bullet Connectors Application Guidelines: Ideal for for 2WD and 4x4 short course trucks, monster trucks and rock racers running up to 4s LiPo and weighing up to 6.5 lbs. It is a cooling running torque animal for lighter 1/10th scale 2WD stadium trucks and buggies running up to a 4s LiPo. Recommended ESC(s): Combo includes Mamba X ESC. Max. Recommended Vehicle Weight: See application guidelines Tech Notes: Running modes: SMARTSENSE™, Sensored only Water Resistant Design: The sensor board is coated with silicone conformal coating to protect the sensors from moisture. The sensor connections are not water resistant; water can cause signal loss which could result in loss of sensored capabilities. Castle recommended applying dielectric grease to the outside of the sensor wire connections after installation of the wire. Routine maintenance is recommended after running in wet conditions. Please refer to this document for running and maintaining motors in wet environments. Product Features Data-Logging Enabled by default, the Mamba X captures and records performance data from your vehicle. This allows you to view a detailed turn-by-turn record of what your ESC actually experienced during the run. You will be able to record real-time data such as motor RPM, battery current and voltage, ESC and motor temperature, throttle input, and more. Download and analyze the collected data via Castle Link and make adjustments to maximize both performance and battery life. You can use the Quick Connect Duo (sold separately) to allow you to access both wires into a single Castle Link connection.  Auxiliary Functionality: The Mamba X allows “on-the-fly” adjustments to be made through the AUX wire once enabled in Castle Link. Once you have selected an AUX wire function, that setting can then be tuned from your transmitter while driving. Torque control, max throttle, max brake and drag brake adjustments are a sampling of the available modes. This real-time tuning allows you to quickly and easily fine-tune your system. Programmability: For over 20 years Castle engineers have been setting the bar for industry leading software functionality. The Castle Link Programming Suite is your ticket to creating the perfect setup. To gain access to the host of tuning parameters, simply redeem the coupon for the Castle Link adapter included with your Mamba X purchase or download the Castle Link iOS App and purchase the B-Link Bluetooth Adapter. Download the simple to install software from our website and you are ready to personalize your controller’s parameters. Don’t forget to use the “check for updates” feature in Castle Link to download new software as it becomes available. New features are yours at no cost, a perk for choosing Castle.  Firmware Updates: Users will receive free access to all firmware updates, including added features sets using the Castle Link USB Programming Kit or the Castle Link iOS App and a B-Link Bluetooth Adapter.  Advanced Technology When paired with a Castle 4-POLE 12-SLOT SENSORED MOTOR SMARTSENSE™ software, enabled by default in the Castle Link Programming Suite, will use the motor’s sensors to provide smooth starts, excellent torque, and low-speed drivability.  Once the motor is turning, it seamlessly transitions to Castle’s ULTRA-EFFICIENT sensorless mode with ELECTRONIC TIMING. Smooth sensored startups and high-efficiency sensorless running makes the Mamba X system produce more power and less heat. QUIETSENSE™ is an innovative advancement in the design of sensored motors to deliver the highest precision and most efficient startup. Power System Alerts: Mamba X also features updated Audible Alerts that will notify you of possible issues with calibrations and error conditions to help diagnose problems in the field. Telemetry Ready: Mamba X is telemetry ready, which means owners of Futaba T4PX Transmitters will be able to purchase the Castle Creations Telemetry Link for S.BUS2. Real-time data such as ESC temperature, voltages, and RPM can be monitored to ensure performance advantages and spare you the “unknown” parameters that all R/C enthusiasts experience at some point. Telemetry data provides another level of protection and can increase performance. Rugged and Element Proof: Housed in a rugged CNC-machined aluminum case and then potted in waterproof epoxy. This not only protects the electronics but ensures any heat generated in the controller can easily be dissipated through the case. Powerful Integrated BEC: The high performance Mamba X includes an integrated and powerful 8A adjustable BEC and can push the most extreme 1/10th scale setups and 1/8th scale* race buggies.   *In 1/8th scale setups, the Mamba X is intended to be used for off-road racing in buggies weighing up to 9 lbs (including batteries and ready-to-run). In these 1/8th scale racing setups, the Mamba X should be run at 4S Lipo (16.8V) max and is recommended to be paired with the Castle 1512-1800Kv (P/N: 060-0062-00) or Castle 1515-2200Kv (P/N: 060-0063-00) motor, with appropriate gearing only. Castle Link Compatible With the Castle Link USB Programming Kit you can use your Windows™ PC to easily program your controller. Castle Link includes all code for all Castle Link compatible hobby products in one convenient download.   Adjustable settings include: Throttle Braking curve Drag brake Auto LiPo cutoff Punch Control Reverse Type Motor Type Additional Castle Link benefits include: Access expanded programming and custom parameters for Castle controllers Access to all firmware updates, including added features sets released from Castle Engineering, at no charge. Intuitive Demo Mode capability Ability to default ESC to factory settings Ability to save setup profiles for later use Ability to download and view data logs (on applicable controllers)  

3.795,-

3.995,-

KJØP
-5%
Hovedbilde Castle Creations 010015509 Mamba X 25.2V WP ESC ... Hovedbilde Castle Creations 010015509 Mamba X 25.2V WP ESC ...
Castle Creations 010015509 Mamba X 25.2V WP ESC ...
Art.nr: 010-0155-09
Copied
  MAMBA X, 25.2V WP ESC AND 1406-2280KV SENSORED CRAWLER COMBO The Mamba X Crawler edition is our latest offering for the crawling crowd. We have taken our new 1406 low kv crawler motors and paired it with the high power, ultra reliable Mamba X ESC. This combo is ideal for low speed crawling or trail running in vehicles weighing up to 4kg on 3s or 4s; it can also be used in more aggressive setups like rock racing and extended hill climbing on vehicles up to 2.2kg. Your ESC will come with our new V2.02 firmware that has been enhanced for rock crawling and sensored operation.   Waterproof: Yes Telemetry Capable: Yes Data Logging: Yes Auxiliary Wire: Yes Minimum Input Voltage: 2S Maximum Input Voltage: 4S Sensored Capable: Yes Features: INPUT VOLTAGE RANGE OF 2S-4S (with included motor) with an internal 8A ADJUSTABLE BEC (5.25V-8.0V) Housed in a RUGGED CNC-MACHINED ALUMINUM CASE and potted in WATERPROOF epoxy to withstand the most extreme driving conditions and environments. Removable 30MM COOLING FAN Recon G6 Certified Paired with the improved 4-POLE 12-SLOT SENSORED1406-1900KV SLATE motor provides precise throttle control and buttery smooth starts Convenient TRANSMITTER PROGRAMMING for six common adjustable settings. Access to Castle’s INDUSTRY LEADING SOFTWARE with use of Castle Link USB (coupon included for free USB with purchase) and freely downloadable Castle-Link Windows™ program , or the Castle Link iOS App and a B-LINK™ Bluetooth Adapter (sold separately) for anytime, anywhere system adjustments. Click here to see the Mamba X Castle Link Settings Overview. Firmware updates available with use of Castle Link USB and Castle Link Programming Suite. DATA LOGGING captures and records performance data for maximum optimization of both performance and battery life AUXILIARY WIRE FUNCTIONALITY allows for “on-the-fly” adjustments such as ROCK RACE/CRAWLER MODE. These adjustments can be made real time, while driving, right from your transmitter. Castle’s SMARTSENSE™ software, enabled by default in the Castle Link Programming Suite, will use the motor’s sensors to provide smooth starts, excellent torque, and low-speed drivability. Once the motor is turning, it seamlessly transitions to Castle’s ULTRA-EFFICIENT sensorless mode with ELECTRONIC TIMING. Smooth sensored startups and high-efficiency sensorless running makes the Mamba X system produce more power and less heat. QUIETSENSE™ is an innovative advancement in the design of sensored motors to deliver the highest precision and most efficient startup. Mamba X ESC features AUDIBLE ALERTS that will notify you of possible issues with calibrations and error conditions to help diagnose problems in the field. Mamba X is TELEMETRY READY which means owners of the Futaba T4PX or 7PX Transmitters will be able to purchase the Castle Creations Telemetry Link for S.BUS2. Real-time data such as ESC temperature, voltages and RPM can be monitored to ensure performance advantages and spare you the “unknown” parameters that all R/C enthusiasts experience at some point. Telemetry data provides another level of protection and can increase performance. Additional features are continued in FEATURES tab. Additional specifications continued in SPECIFICATIONS tab. SMARTSENSE™ Enabled by default, the Mamba X uses the motor’s sensors to provide smooth starts, excellent torque, and low-speed drivability. Once the motor is turning, it seamlessly transitions to Castle’s ULTRA-EFFICIENT sensorless mode with electronic timing. When running, a motor must transition between different load points and a different timing advance is required for optimal efficiency at each. Electronic timing in SMARTSENSE™ will advance timing automatically for peak performance during all driving conditions. This combines the best of both worlds in an unrivaled HYBRID between smooth sensored startups and high-efficiency sensorless running. Your motor will produce more power and less heat. AUXILIARY WIRE FUNCTIONALITY The Mamba X allows “on-the-fly” adjustments to be made through the AUX wire once enabled in Castle Link. Once you have selected an AUX wire function, that setting can then be tuned from your transmitter while driving. Torque control, max throttle, max brake and drag brake adjustments are a sampling of the available modes. This real-time tuning allows you to quickly and easily fine-tune your system. DATALOGGING Enabled by default, the Mamba X captures and records performance data from your vehicle. This allows you to view a detailed turn-by-turn record of what your ESC actually experienced during the run. You will be able to record real-time data such as motor RPM, battery current and voltage, ESC and motor temperature, throttle input, and more. Download and analyze the collected data via Castle Link and make adjustments to maximize both performance and battery life. CASTLE LINK™ For nearly 20 years Castle engineers have been setting the bar for industry leading software functionality. The Castle Link Programming Suite is your ticket to creating the perfect setup. To gain access to the host of tuning parameters, simply redeem the coupon for the Castle Link adapter included with your Mamba X purchase. Download the simple to install software from our website and you are ready to personalize your controller’s parameters. Don’t forget to use the “check for updates” feature in Castle Link to download new software as it becomes available. New features are yours at no cost, a perk for choosing Castle. ESC Technical Specs: Input Voltage Range: MIN: 2S LiPo - MAX: 6S LiPo (25.2V) - Note that with the included motor it's max 4s BEC Specifications: Adjustable: 5.5V, 6.0V, 7.5V. or 8.0V (8A Peak), default 5.5V Operating Environment: Waterproof* design allows for use in nearly any environment. Brake: Proportional Reversible: Yes, but may be disabled for racing. On/Off Switch: Yes Cooling Fan: Yes, factory equipped (30 mm), fully removable** (see Product Use Statements below) Length: 54.4 mm Width: 35.2 mm Height: 30 mm Weight (with wires): 101 g Connectors: 4.0 mm female bullets for motor connection Items Needed for Operation: Battery Connector required, Castle 6.5mm Polarized Connectors, Castle 4.0mm Polarized Connectors, Traxxas® Power Connectors, or Deans® Ultra Plugs are recommended. Product Use Statements: *Although Mamba X is waterproof, it is not intended for operation while completely submerged in liquid. Always rinse the ESC and motor with clean water after exposure to corrosives or dirt. While the motor and controller may be waterproof, we suggest users confirm that the rest of their vehicle, including the batteries, servos, radio and chassis are also waterproof before exposing them to liquids of any kind. **The cooling fan must be removed prior to driving in wet conditions. It is not waterproof.   Application Guidelines: Intended for up to 6S (25.2 Volt) operation in vehicles weighing less than 9bs/4kg Recommended Motors: Castle 1406, 1410 and 1415 Sensored motors Max. Recommended Vehicle Weight: Less than 4kg with batteries & ready-to-run Programmability: Fully programmable Castle feature set using Castle Link USB adapter (coupon for free link included in package) and freely downloadable Castle Link Windows software. Telemetry Link Capable: Yes 1406-1900KV Motor Technical Specs: Input Voltage Range: 2-4S LiPo Kv: 2280 Max. RPM: 100,000 Length: 49.5 mm Diameter: 36 mm Weight (w/wires): 197 g Shaft Length: 15 mm Shaft Diameter: 1/8" (3.17 mm) Mounting Hole Specifications: M3 @ 25 mm spacing Cooling Fan: Optional Connectors: 4 mm male Castle Bullet Connectors Application Guidelines: Ideal for 1/10 scale low speed rock crawlers/trail runners on 3S-4S weighing less than 4kg. Can also be used in more aggressive setups in lighter 1/10 scale touring cars, stadium trucks or buggies weighing up to 2.2kg. Please refer to our Gearing Chart for recommended motor, battery and gearing for some of the more popular vehicles on the market. Tech Notes:      Running modes: SMARTSENSE™, Sensored, Sensorless Package Includes: Mamba X Electronic Speed Controller 1406-2280kv sensored brushless motor 210mm length sensor wire (for sensored operation) Castle Sensor Harness adapter Driver's Ed and Quick Start Guides Castle decal sheet

3.795,-

4.195,-

KJØP
-10%
Hovedbilde Castle Creations MAMBA X 5mm SCT, SENSORED, 25.2V WP ... Hovedbilde Castle Creations MAMBA X 5mm SCT, SENSORED, 25.2V WP ...
Castle Creations MAMBA X 5mm SCT, SENSORED, 25.2V WP ...
Art.nr: 010-0155-13
Copied
Castel Creations MAMBA X SCT, SENSORED, 25.2V WP ESC AND 1412-3200KV 5MM COMBO Meet the next generation. Castle Creations is proud to announce our new flagship surface product, the MAMBA X EXTREME 1:10 SCALE WATERPROOF ESC. We at Castle wanted to address three main concepts while designing a new ESC for the modern day RC enthusiast; VERSATILITY, RELIABILITY, and PERFORMANCE. These are the pillars of the Mamba X design and the driving forces behind the feature-packed controller. The Mamba X is extremely versatile, capable of powering a wide variety of applications ranging from 2S to 6S and vehicles ranging from 1/10th scale to 1/8th scale*. The Mamba X with 1412-3200Kv with 5mm shaft sensored motor is perfect for 2WD and 4x4 short course trucks, monster trucks and rock racers running up to 3s LiPo and weighing up to 6.5 lbs; it can be run on a 4s LiPo with very conservative gearing and keep a close eye on temperatures. It is a cooling running torque animal for lighter 1/10th scale 2WD stadium trucks and buggies running up to a 4s LiPo. FEATURES: ESC voltage range 2S-6S 1412-3200Kv 5mm shaft Sensored Motor Waterproof 8A Adjustable BEC (5.25V-8.0V) Data-logging Rugged CNC Aluminum Case Castle Link Programming Support Convenient Transmitter Programming Auxiliary Wire Functionality for "on-the-fly" adjustments SmartSense™Technology Integrated Capacitors Removable 30mm Cooling Fan Integrated 4mm Bullet Connectors 12 AWG Power Wires Waterproof Switch Audible Alerts and LED Alerts for easy diagnoses of common issues ROAR Certified ESC RECON G6 Certified ESC MAMBA X ESC 1410-3200 5mm shaft COMBO COMES WITH: Mamba X ESC with Sensor Harness 1410-3200Kv 4-pole 12-slot sensored motor Coupon for free Castle Link USB Mamba Decals Driver's Ed and Quick Start Guide Gearing Chart for Castle Motors *In 1/8th scale setups, the Mamba X is intended to be used for off-road racing in buggies weighing up to 9 lbs (including batteries and ready-to-run). In these 1/8th scale racing setups, the Mamba X should be run at 4S Lipo (16.8V) max and is recommended to be paired with the Castle 1512-1800Kv (P/N: 060-0062-00) or Castle 1515-2200Kv (P/N: 060-0063-00) motor, with appropriate gearing only. ESC Technical Specs Input Voltage Range: MIN: 2S LiPo MAX: 6S LiPo (25.2V) (4s maximum with included 1412 - 3200kv motor) BEC Specifications: Adjustable: 5.5V, 6.0V, 7.5V. or 8.0V (8A Peak), default 5.5V Operating Environment: Waterproof* design allows for use in nearly any environment. Brake: Proportional Reversible: Yes, but may be disabled for racing. On/Off Switch: Yes Cooling Fan: Yes, factory equipped (30mm), fully removable** (see Product Use Statements below) Size: Length: 2.14" (54.4mm) Width: 1.39" (35.2mm) Height: 1.18" (30.0mm) Weight (with wires): 3.56 oz. (101g) Connectors: 4.0mm female bullets for motor connection. Items Needed for Operation: Battery Connector required, Castle 6.5mm Polarized Connectors, Castle 4.0mm Polarized Connectors, Traxxas® Power Connectors, or Deans® Ultra Plugs are recommended. Product Use Statements: *Although Mamba X is waterproof, it is not intended for operation while completely submerged in liquid. T Always rinse the ESC and motor with clean water after exposure to corrosives or dirt. While the motor and controller may be waterproof, we suggest users confirm that the rest of their vehicle, including the batteries, servos, radio and chassis are also waterproof before exposing them to liquids of any kind. **The cooling fan must be removed prior to driving in wet conditions. It is not waterproof. Max. Recommended Vehicle Weight: Up to 6.5lbs with included 1412 - 3200kv sensored motor. Telemetry Link Capable: Yes Tech Notes: Mamba X setups frequently hit 100+ amps in peaks and not all LiPos are created equal. Surge ratings should never be used to determine a pack's suitability for a brushless application. Recommended battery capacity for 1:8th scale vehicles is 5000mAh. We recommend using 30C continuous discharge or higher LiPo batteries (or high quality 25C batteries such as Traxxas® Power Cell). Our experience suggests using only mild gear ratios with NiMH cells. Do not attempt to use NiMH cells in extreme setups. Applying voltages higher than 25.2V will cause irreparable damage to ESC. We recommend a high-current connector designed for high-powered electric systems, rated for 70+ amps. Invest in connector sets made for high-powered electric systems such as our Castle 6.5mm Polarized Connectors, Castle 4.0mm Polarized Connectors, Traxxas® Power Connectors, or Deans® Ultra Plugs. Motor Technical Specs Input Voltage Range: 2-4S LiPo Kv: 3200 Max. RPM: 75,000 Size: Length: 62.5mm Diameter: 36mm Weight (w/wires): 265.4g / 9.4oz Shaft Size: Length: 21mm Diameter: .197" (5mm) Mounting Hole Specifications: M3 @ 25mm Cooling Fan: Optional, coming soon! Connectors: 4mm male Castle Bullet Connectors Application Guidelines: Ideal for 2WD and 4x4 short course trucks, monster trucks and rock racers running up to 3s LiPo and weighing up to 6.5 lbs; it can be run on a 4s LiPo with very conservative gearing and keep a close eye on temperatures. It is a cooling running torque animal for lighter 1/10th scale 2WD stadium trucks and buggies running up to a 4s LiPo. Recommended ESC(s): Combo includes Mamba X ESC. Max. Recommended Vehicle Weight: See application guidelines Tech Notes: Running modes: SMARTSENSE™, Sensored only Water Resistant Design: The sensor board is coated with silicone conformal coating to protect the sensors from moisture. The sensor connections are not water resistant; water can cause signal loss which could result in loss of sensored capabilities. Castle recommended applying dielectric grease to the outside of the sensor wire connections after installation of the wire. Routine maintenance is recommended after running in wet conditions.     

3.995,-

4.195,-

KJØP
-5%
Hovedbilde Castle Creations 010015511 Mamba X 25.2V WP ESC ... Hovedbilde Castle Creations 010015511 Mamba X 25.2V WP ESC ...
Castle Creations 010015511 Mamba X 25.2V WP ESC ...
Art.nr: 010-0155-11
Copied
MAMBA X Sensor ESC 25,2V WP, 1406-3800KV Combo Crawler The Mamba X Crawler edition is our latest offering for the crawling crowd. We have taken our new 1406 low kv crawler motors and paired it with the high power, ultra reliable Mamba X ESC. This combo is ideal for low speed crawling or trail running in vehicles weighing up to 4kg on 3s or 4s; it can also be used in more aggressive setups like rock racing and extended hill climbing on vehicles up to 2.2kg. Your ESC will come with our new V2.02 firmware that has been enhanced for rock crawling and sensored operation.   Waterproof: Yes Telemetry Capable: Yes Data Logging: Yes Auxiliary Wire: Yes Minimum Input Voltage: 2S Maximum Input Voltage: 3S Sensored Capable: Yes Features: INPUT VOLTAGE RANGE OF 2S-3S (with included motor) with an internal 8A ADJUSTABLE BEC (5.25V-8.0V) Housed in a RUGGED CNC-MACHINED ALUMINUM CASE and potted in WATERPROOF epoxy to withstand the most extreme driving conditions and environments. Removable 30MM COOLING FAN Recon G6 Certified Paired with the improved 4-POLE 12-SLOT SENSORED1406-1900KV SLATE motor provides precise throttle control and buttery smooth starts Convenient TRANSMITTER PROGRAMMING for six common adjustable settings. Access to Castle’s INDUSTRY LEADING SOFTWARE with use of Castle Link USB (coupon included for free USB with purchase) and freely downloadable Castle-Link Windows™ program , or the Castle Link iOS App and a B-LINK™ Bluetooth Adapter (sold separately) for anytime, anywhere system adjustments. Click here to see the Mamba X Castle Link Settings Overview. Firmware updates available with use of Castle Link USB and Castle Link Programming Suite. DATA LOGGING captures and records performance data for maximum optimization of both performance and battery life AUXILIARY WIRE FUNCTIONALITY allows for “on-the-fly” adjustments such as ROCK RACE/CRAWLER MODE. These adjustments can be made real time, while driving, right from your transmitter. Castle’s SMARTSENSE™ software, enabled by default in the Castle Link Programming Suite, will use the motor’s sensors to provide smooth starts, excellent torque, and low-speed drivability. Once the motor is turning, it seamlessly transitions to Castle’s ULTRA-EFFICIENT sensorless mode with ELECTRONIC TIMING. Smooth sensored startups and high-efficiency sensorless running makes the Mamba X system produce more power and less heat. QUIETSENSE™ is an innovative advancement in the design of sensored motors to deliver the highest precision and most efficient startup. Mamba X ESC features AUDIBLE ALERTS that will notify you of possible issues with calibrations and error conditions to help diagnose problems in the field. Mamba X is TELEMETRY READY which means owners of the Futaba T4PX or 7PX Transmitters will be able to purchase the Castle Creations Telemetry Link for S.BUS2. Real-time data such as ESC temperature, voltages and RPM can be monitored to ensure performance advantages and spare you the “unknown” parameters that all R/C enthusiasts experience at some point. Telemetry data provides another level of protection and can increase performance. Additional features are continued in FEATURES tab. Additional specifications continued in SPECIFICATIONS tab. SMARTSENSE™ Enabled by default, the Mamba X uses the motor’s sensors to provide smooth starts, excellent torque, and low-speed drivability. Once the motor is turning, it seamlessly transitions to Castle’s ULTRA-EFFICIENT sensorless mode with electronic timing. When running, a motor must transition between different load points and a different timing advance is required for optimal efficiency at each. Electronic timing in SMARTSENSE™ will advance timing automatically for peak performance during all driving conditions. This combines the best of both worlds in an unrivaled HYBRID between smooth sensored startups and high-efficiency sensorless running. Your motor will produce more power and less heat. AUXILIARY WIRE FUNCTIONALITY The Mamba X allows “on-the-fly” adjustments to be made through the AUX wire once enabled in Castle Link. Once you have selected an AUX wire function, that setting can then be tuned from your transmitter while driving. Torque control, max throttle, max brake and drag brake adjustments are a sampling of the available modes. This real-time tuning allows you to quickly and easily fine-tune your system. DATALOGGING Enabled by default, the Mamba X captures and records performance data from your vehicle. This allows you to view a detailed turn-by-turn record of what your ESC actually experienced during the run. You will be able to record real-time data such as motor RPM, battery current and voltage, ESC and motor temperature, throttle input, and more. Download and analyze the collected data via Castle Link and make adjustments to maximize both performance and battery life. CASTLE LINK™ For nearly 20 years Castle engineers have been setting the bar for industry leading software functionality. The Castle Link Programming Suite is your ticket to creating the perfect setup. To gain access to the host of tuning parameters, simply redeem the coupon for the Castle Link adapter included with your Mamba X purchase. Download the simple to install software from our website and you are ready to personalize your controller’s parameters. Don’t forget to use the “check for updates” feature in Castle Link to download new software as it becomes available. New features are yours at no cost, a perk for choosing Castle. ESC Technical Specs: Input Voltage Range: MIN: 2S LiPo - MAX: 6S LiPo (25.2V) - Note that with the included motor it's max 3s BEC Specifications: Adjustable: 5.5V, 6.0V, 7.5V. or 8.0V (8A Peak), default 5.5V Operating Environment: Waterproof* design allows for use in nearly any environment. Brake: Proportional Reversible: Yes, but may be disabled for racing. On/Off Switch: Yes Cooling Fan: Yes, factory equipped (30 mm), fully removable** (see Product Use Statements below) Length: 54.4 mm Width: 35.2 mm Height: 30 mm Weight (with wires): 101 g Connectors: 4.0 mm female bullets for motor connection Items Needed for Operation: Battery Connector required, Castle 6.5mm Polarized Connectors, Castle 4.0mm Polarized Connectors, Traxxas® Power Connectors, or Deans® Ultra Plugs are recommended. Product Use Statements: *Although Mamba X is waterproof, it is not intended for operation while completely submerged in liquid. Always rinse the ESC and motor with clean water after exposure to corrosives or dirt. While the motor and controller may be waterproof, we suggest users confirm that the rest of their vehicle, including the batteries, servos, radio and chassis are also waterproof before exposing them to liquids of any kind. **The cooling fan must be removed prior to driving in wet conditions. It is not waterproof.   Application Guidelines: Intended for up to 6S (25.2 Volt) operation in vehicles weighing less than 9bs/4kg Recommended Motors: Castle 1406, 1410 and 1415 Sensored motors Max. Recommended Vehicle Weight: Less than 4kg with batteries & ready-to-run Programmability: Fully programmable Castle feature set using Castle Link USB adapter (coupon for free link included in package) and freely downloadable Castle Link Windows software. Telemetry Link Capable: Yes 1406-1900KV Motor Technical Specs: Input Voltage Range: 2-3S LiPo Kv: 3800 Max. RPM: 100,000 Length: 49.5 mm Diameter: 36 mm Weight (w/wires): 197 g Shaft Length: 15 mm Shaft Diameter: 1/8" (3.17 mm) Mounting Hole Specifications: M3 @ 25 mm spacing Cooling Fan: Optional Connectors: 4 mm male Castle Bullet Connectors Application Guidelines: Ideal for 1/10 scale low speed rock crawlers/trail runners on 2S-3S weighing less than 4kg. Can also be used in more aggressive setups in lighter 1/10 scale touring cars, stadium trucks or buggies weighing up to 2.2kg Please refer to our Gearing Chart for recommended motor, battery and gearing for some of the more popular vehicles on the market. Tech Notes:      Running modes: SMARTSENSE™, Sensored, Sensorless Package Includes: Mamba X Electronic Speed Controller 1406-3800kv sensored brushless motor 210mm length sensor wire (for sensored operation) Castle Sensor Harness adapter Driver's Ed and Quick Start Guides Castle decal sheet

3.795,-

4.195,-

KJØP
-10%
Hovedbilde Castle Creations MAMBA Micro X2 16,8V WP Sensored ESC ... Hovedbilde Castle Creations MAMBA Micro X2 16,8V WP Sensored ESC ...
Castle Creations MAMBA Micro X2 16,8V WP Sensored ESC ...
Art.nr: 010-0171-00
Copied
CASTLE CREATIONS MAMBA MICRO X2 1/18 SENSORED ESC WITH 4MM BULLETS The Mamba Micro X2 is a refresh of our popular 1:18 scale Mamba Micro X. This new ESC increases the maximum input voltage to 4s. We also added DATA LOGGING and our CRYO-DRIVE™ TECHNOLOGY; CryoDrive allows the ESC to run cooler and more efficiently at partial throttle.  Like its predecessor, it is waterproof* and has SENSORED MOTOR SUPPORT. This is the perfect upgrade for 1:18th scale 2WD or 4WD vehicles up to 2.25 lbs. The Mamba Micro X also works well in some 1:10th scale crawlers for low speed operation (no rock racing/hill climbing). You can now purchase the Mamba Micro X2 Crawler Edition ESC paired with our Slate Crawler motors. Important Product Update, 8/2/2022. Due to ongoing supply chain disruptions, we have been unable to manufacture the Micro X2. The parts in question are integral to the onboard 2-amp BEC. In an effort to provide the Micro X2 for sale again, we have removed the internal BEC and are including our external 10-amp CC BEC (a $24 value) with every Micro X2 purchase. This upgraded BEC has a wider range of BEC voltages and much higher current capacity. The retail price for the ESC and combos has not changed. For instructions on how to install the CC BEC, please visit www.castlecreations.com/microx2BEC.   Input Voltage range 2S-4S Waterproof design; included CC BEC is not waterproof. Sensored Motor capable (with optional sensor harness) Convenient transmitter programming for six common adjustable settings. Additional settings and software updates available via Windows®-based Castle Link software and USB adapter (coupon included with purchase) or the Castle Link App for Android or iOS and a B-LINK Bluetooth Adapter (sold separately) Telemetry Ready (Compatible with S.BUS2 Telemetry Link and Futaba T4PX, T7PX and T7PXR transmitters) Auxiliary Wire Functionality allows for “on-the-fly” adjustments such as Max Power and Max Brake. Audible Alerts that will notify you of possible issues with calibrations and error conditions. Designed and manufactured in Olathe, Kansas and is backed by our 1-year warranty.   Mamba Micro X2  ESC Purchase Includes: Mamba Micro X2 ESC with 3.5mm connectors External 10-amp CC BEC Coupon for free Castle Link USB adapter Quick Start Guide Castle Decals *Not intended for operation while submerged in liquid. If unit is operated in wet conditions, rinse with fresh water to remove dirt or corrosives, then fully dry unit. Specs: Input Voltage Range: 2S-4S LiPo (16.8V Max) Operating Environment: Waterproof* design allows for use in nearly any environment Brake: Proportional Reversible: Yes, but may be disabled On/Off Switch: Yes, waterproof Cooling Fan: Not included Size (L x W x H): 41.6 x 29.4 x 21.3 mm Weight (with wires): 47 gr Connectors: 4 mm bullets Items Needed for Operation: Battery Connector required: Castle 4.0mm Polarized Connectors, Deans Ultra Plugs and XT60 are recommended Product Use Statements: Applying voltages higher than 16.8 volts will cause irreparable damage to your controller Minimum recommended battery capacity for 1/18 scale vehicles is 1500mAh. We recommend using 30C continuous discharge or higher LiPo batteries (or high quality 25C batteries such as Traxxas® Power Cell Mamba Micro X2 has 4mm bullet connectors on the motor wires and the battery input wires are bare. You must add the connector of your choice to the battery leads. We recommend a high current connector rated for at least 40 amps. Application Guidelines: 1/14 scale RC vehicles weighing up to 1.3kg and 1/10 scale low speed crawler vehicles up to 4kg Recommended Motors: - Castle 1406-1900Kv Sensored Motor - Castle 1406-2280Kv Sensored Motor - Castle 1406-2850Kv Sensored Motor Programmability: Additional settings and software updates available via Windows®-based Castle Link software and USB adapter or the Castle Link App for Android or iOS and a B-LINK Bluetooth Adapter (sold separately) Telemetry Link Capable: Yes, with Castle Creations Telemetry Link for S.BUS2 and Futaba T4PX and T7PX Transmitters Tech Notes: *Although the Mamba Micro X2 is waterproof, it is not intended for operation while completely submerged in liquid. They can corrode when exposed to corrosive materials, such as salt water. Always rinse the ESC with clean water after exposure to corrosives or dirt. While the controller may be waterproof, we suggest users confirm that the rest of their vehicle, including the batteries, servos, radio and chassis are also waterproof before exposing them to liquids of any kind.  

1.399,-

1.699,-

KJØP
-18%
Hovedbilde Castle Creations 2850KV Crawler pakke Hovedbilde Castle Creations 2850KV Crawler pakke
Castle Creations 2850KV Crawler pakke
Castle Creations 2850KV Crawler pakke

2.695,-

3.643,-

Ikke på lager
Hovedbilde Castle Creations 010-0145-03 Monster X 25.2V ... Hovedbilde Castle Creations 010-0145-03 Monster X 25.2V ...
Castle Creations 010-0145-03 Monster X 25.2V ...
Art.nr: 010-0145-03
Copied
Castle Creations 010-0145-03 Monster X 25.2V ESC/1515-2200kV Motor. Putting the X in Extreme! Mamba Monster X is our latest 1:8 scale and Monster truck controller capable of 2S - 6S LiPo, with an 8 amp peak BEC - and, it’s waterproof*, so you can run your vehicle through morning dew, across soggy snow, or a muddy trail. This is the perfect upgrade for 1:8 scale buggies, truggies and on-road vehicles as well as 1:10 scale monster trucks weighing up to 15 lbs. It also comes standard with a highly efficient, 30mm ESC cooling fan. Mamba Monster X also features updated Audible Alerts that will notify you of possible issues with calibrations and error conditions to help diagnose problems in the field. Now With a Sensored Motor! The Mamba Monster X is now paired with our brand new sensored 15xx series motors.We have taken our award winning 15xx series motors and added sensor capabilities. So now you can all of the torque and performance you know and love and have even more control! We still use the same high quality components as our sensorless motors, such as ultra-thin stator laminations, high temperature sintered neodymium magnet and high RPM ABEC3 bearings. Combo includes required Castle sensor harness and sensor wire for sensored operation. Why sensored? Some drivers and applications are better suited for sensored motors. Some drivers need smoother throttle control in racing environments. When coming out of a corner a sensorless motor may not provide optimal throttle control and can cause the motor power to surge a bit. With sensored motors the throttle will feel smoother and more linear which allows for more precise throttle management. If you are simply bashing and not racing on a track you will most likely not see the full benefits from a sensored operation. The Auxiliary Advantage. Mamba Monster X features the addition of a new, programmable Auxiliary Wire that allows you to make “on-the-go” adjustments to several settings such as torque control, and max throttle, and fine-tune the performance of your ESC right from the transmitter using an auxiliary channel on the receiver. The AUX wire function is disabled by default but is programmable via Castle Link. Once you have programmed the functionality of the AUX wire, that setting can then be adjusted on-the-go from a compatible transmitter. Data Logging Mamba Monster X can capture and record performance data from your last couple of runs, commonly referred to as data logging. This data can be downloaded via the Castle Link USB programmer; you can use the Quick Connect Duo (sold separately) to allow you to quickly access the ESC's receiver wire without having to disconnect from your receiver. You can then analyze this data and make adjustments to the ESC to maximize both performance and battery life. Telemetry Capability Mamba Monster X is telemetry ready, which means owners of the Futaba T4PX Transmitters are able to purchase the Castle Telemetry Link for S.BUS2. Real-time data such as ESC temperature, voltages and RPM can be monitored to ensure performance advantages and spare you the “unknown” parameters that all R/C enthusiasts experience at some point. Telemetry data provides another level of protection and can increase performance. The 1515-2200kv version is capable of 2S to 6S LiPo and is perfect forMonster trucks up to 6S. This is the perfect motor for 1:8 scalebuggies, truggies and on-road vehicles as well as 1:10 scale monstertrucks weighing up to 15 lbs. Paired with our Mamba Monster X ESC youwill have all the power your 1/8th scale vehicle demands with thesmoother throttle control of a sensored motor. *Although Mamba Monster X and Castle brushless motors are waterproof, they are not intended for operation while completely submerged in liquid. They can corrode when exposed to corrosive materials, such as salt water. Always rinse the ESC and motor with clean water after exposure to corrosives or dirt. While the motor and controller may be waterproof, we suggest users confirm that the rest of their vehicle, including the batteries, servos, radio and chassis are also waterproof before exposing them to liquids of any kind.  **The cooling fan must be removed prior to driving in wet conditions. It is not waterproof. SPECIFICATIONS : 2023-04-28 Application: Car Motor Type: Brushless kV Value: 2200 kV Motor diameter: 40 mm Motor length: 75,4 mm Shaft length: 20 mm Shaft Diameter: 5,0 mm Connector: 6,5mm Bullet Special: Complete System , Sensor-based

4.595,-

4.795,-

KJØP
-4%
Hovedbilde Castle Creations 010-0145-04 Monster X 25.2V ... Hovedbilde Castle Creations 010-0145-04 Monster X 25.2V ...
Castle Creations 010-0145-04 Monster X 25.2V ...
Art.nr: 010-0145-04
Copied
Castle Creations 010-0145-04 Monster X 25.2V ESC/1512-2650kV Motor. Putting the X in Extreme! Mamba Monster X is our latest 1:8 scale and Monster truck controller capable of 2S - 6S LiPo (4s maximum with included 1512 - 2650kv motor), with an 8 amp peak BEC - and, it’s waterproof*, so you can run your vehicle through morning dew, across soggy snow, or a muddy trail. This is the perfect upgrade for 1:8 scale buggies and on-road vehicles as well as 1:10 scale monster trucks weighing up to 9 lbs with the included 1512 - 2650kv sensored motor. It also comes standard with a highly efficient, 30mm ESC cooling fan. Mamba Monster X also features updated Audible Alerts that will notify you of possible issues with calibrations and error conditions to help diagnose problems in the field. Now With a Sensored Motor! The Mamba Monster X is now paired with our brand new sensored 15xx series motors.We have taken our award winning 15xx series motors and added sensor capabilities. So now you can all of the torque and performance you know and love and have even more control! We still use the same high quality components as our sensorless motors, such as ultra-thin stator laminations, high temperature sintered neodymium magnet and high RPM ABEC3 bearings. Why sensored? Some drivers and applications are better suited for sensored motors. Some drivers need smoother throttle control in racing environments. When coming out of a corner a sensorless motor may not provide optimal throttle control and can cause the motor power to surge a bit. With sensored motors the throttle will feel smoother and more linear which allows for more precise throttle management. If you are simply bashing and not racing on a track you will most likely not see the full benefits from a sensored operation. The Auxiliary Advantage. Mamba Monster X features the addition of a new, programmable Auxiliary Wire that allows you to make “on-the-go” adjustments to several settings such as torque control, and max throttle, and fine-tune the performance of your ESC right from the transmitter using an auxiliary channel on the receiver. The AUX wire function is disabled by default but is programmable via Castle Link. Once you have programmed the functionality of the AUX wire, that setting can then be adjusted on-the-go from a compatible transmitter. Data Logging Mamba Monster X can capture and record performance data from your last couple of runs, commonly referred to as data logging. This data can be downloaded via the Castle Link USB programmer; you can use the Quick Connect Duo (sold separately) to allow you to quickly access the ESC's receiver wire without having to disconnect from your receiver. You can then analyze this data and make adjustments to the ESC to maximize both performance and battery life. Telemetry Capability Mamba Monster X is telemetry ready, which means owners of the Futaba T4PX Transmitters can purchase the Castle Creations Telemetry Link for S.BUS2. Real-time data such as ESC temperature, voltages and RPM can be monitored to ensure performance advantages and spare you the “unknown” parameters that all R/C enthusiasts experience at some point. Telemetry data provides another level of protection and can increase performance. The 1512-2650kv version is capable of 2S to 4S LiPo and is perfect for 1/8 scale buggies and on-road cars weighing up to 9lbs (with batteries, ready-to-run). Paired with our Mamba Monster X ESC you will have all the power your 1/8th scale vehicle demands with the smoother throttle control of a sensored motor. *Not intended for operation while submerged in liquid. If unit is operated in wet conditions, rinse with fresh water to remove dirt or corrosives, then fully dry unit. Fan is not waterproof.

4.595,-

4.795,-

KJØP
-4%
Hovedbilde Castle Creations 010015502 Mamba X 25.2 WP ...
Castle Creations 010015502 Mamba X 25.2 WP ...
Art.nr: 010-0155-02
Copied
This is the Castle Creations Mamba X Extreme 1/10 scale Waterproof ESC, and the 1406 5700Kv Sensored Brushless Motor. NOT for use in 4WD short course trucks. For 2WD short course trucks on 2S LiPos geared conservatively, 1/10 scale 2WD stadium trucks and buggies on 2S for bashing and limited runs on 3S LiPos with conservative gearing, also ideal for 1/10 scale on road cars running on 2S and 3S LiPo power. FEATURES ESC; 2S - 6S input voltage range Compatible with 1/10 - 1/8 scale vehicles weighing less that 9lbs(4kg), including many extreme 1/10 scale setups and 1/8 scale racebuggies Smartsense uses motor's sensors for smooth starts, excellent torque and low-speed drivability - then transitions to the sensorlessmode with electronic timing, Smartsense automatically advances timing for peak performance during all driving conditions On-the-fly adjustments can be made through the AUX wire once enabled in Castle Link, then settings can be tuned from transmitter while driving Recordable real-time data such as RPM, battery current and voltage, ESC and motor temperature, throttle input and more Audible alerts CNC aluminum case 12AWG high strand count silicone insulated battery wires Motor; High-strength neodymium sintered magnet with Kevlar wrap High-performance 0.2mm steel lamination stacked stator Castle 13 AWG silicone insulated wire leads Oversized NMB bearings Four pole configuration for maximum efficiency at high RPM CNC machined 6061-T6 aluminum front and rear endbells INCLUDES Mamba X Extreme 1/10 scale Electronic Speed Control Replaceable Wire Harness with Receiver Wire, AUX Wire, Fan Connector, and Waterproof Switch Replaceable Motor Sensor Harness 12AWG Battery Wires Cooling Fan 4mm Gold Plated Bullet Motor Connectors 1406 5700Kv Sensored Brushless Motor Sensor Wire SPECIFICATIONS ESC; Input Voltage Range: 2S - 6S LiPo BEC: 5.5V, 6.0V, 7.5V. or 8.0V (8A Peak), default 5.5V Programmable: Fully programmable with Castle Link USB Adapter, and downloadable Casle Link Windows software Telemetry Link Capable: Yes Brake: Proportional Reverse: Yes, may be disabled for racing Cooling Fan: 1.2" (30mm) removable Dimensions: 2.14 x 1.39 x 1.18" (54.4 x 35.2 x 30mm) Max Recommended Vehicle Weight: 9lbs (4kg) with batteries, ready to run Motor; Input Voltage Range: 2-3S LiPo, Kv: 5700 Max. RPM: 100,000 Max. Recommended Vehicle Weight: 5lbs (2278g) with battery RTR Length: 1.9" (49.5mm) Diameter: 1.4" (36mm) Weight with Wires: 7.1oz (202g) Shaft Diameter: 1/8" (3.17mm) Shaft Length: 0.59" (15mm) Mounting Hole Specifications: M3 @ 25mm Connectors: 4mm Male Castle Bullet COMMENTS Waterproof under normal operation. Not intended for operation when completely submerged in water.

3.795,-

3.995,-

KJØP
-5%
Hovedbilde Castle Creations Mamba X SCT WP ESC/1415-2400kV Motor
Castle Creations Mamba X SCT WP ESC/1415-2400kV Motor
Art.nr: 010-0160-00
Copied
This is the Castle Creations Mamba X Extreme 1/10 scale Waterproof ESC,  with the 1415 2400Kv Brushless Motor with 1/8" 3.17mm Output Shaft. **Ideal for 1/10 scale 2WD and 4WD short course trucks up to 6.5lbs**  **using 3 or 4S LiPo power.       FEATURES ESC;  2S - 6S input voltage range  Smartsense uses motor's sensors for smooth starts, excellent torque  and low-speed drivability - then transitions to the sensorless  mode with electronic timing, Smartsense automatically advances  timing for peak performance during all driving conditions  On-the-fly adjustments can be made through the AUX wire once enabled  in Castle Link, then settings can be tuned from transmitter while  driving  Recordable real-time data such as RPM, battery current and voltage,  ESC and motor temperature, throttle input and more  Audible alerts  CNC aluminum case  12AWG high strand count silicone insulated battery wires    Motor;  High-strength 180°C grade neodymium sintered magnets with high- strength wrap  High-temperature, high purity copper windings  High-performance 0.2mm steel lamination stacked stator  Vibration dampening wave spring on shaft  Rotor position sensor eliminates cogging and inconsistency during  startup  CNC machined 6061 T-6 aluminum endbells and motor can  13AWG high strand count silicone insulated wires with 4mm male bullet  connectors  Four pole configuration for maximum efficiency at high RPM  ROAR standard sensor port and labeled connections  Replaceable front end bell/bearing assembly and rotor/shaft assembly     INCLUDES Mamba X Extreme 1/10 scale Electronic Speed Control  Replaceable Wire Harness with Receiver Wire, AUX Wire, Fan Connector,  and Waterproof Switch  Replaceable Motor Sensor Harness  12AWG Battery Wires  Cooling Fan  4mm Gold Plated male and Female Bullet Motor Connectors  1415 1Y 2400Kv 4-Pole Sensored Brushless Motor w/1/8" 3.17mm Shaft  Sensor Wire  Three 3x5mm Socket Head Cap Screws     SPECIFICATIONS ESC, CSEM9500  Input Voltage Range: 2S - 6S LiPo  BEC: 5.5V, 6.0V, 7.5V. or 8.0V (8A Peak), default 5.5V  Programmable: Fully programmable with Castle Link USB Adapter, and  downloadable Castle Link Windows software  Telemetry Link Capable: Yes  Brake: Proportional  Reverse: Yes, may be disabled for racing  Cooling Fan: 1.2" (30mm) removable  Dimensions: 2.14 x 1.39 x 1.18" (54.4 x 35.2 x 30mm)  Max Recommended Vehicle Weight: 9lbs (4kg) with batteries, ready to  run  Motor; CSEC6000  Input Voltage Range: 3-4S LiPo  Kv: 2400  Max RPM: 75,000  Length: 2.7" (69.5mm)  Diameter: 1.4" (36mm)  Shaft Diameter: 1/8" (3.17mm)  Shaft Length: 0.61" (15.5mm)  Weight: 11.2oz (318g)  Mounting Hole Size: M3 @ 25mm     COMMENTS Waterproof under normal operation. Not intended for operation when  completely submerged in water.

3.995,-

4.195,-

KJØP
-5%
Hovedbilde Castle Creations Mamba X SCT Pro ESC/1410-3800kV Motor
Castle Creations Mamba X SCT Pro ESC/1410-3800kV Motor
Art.nr: 010-0161-00
Copied
This is the Castle Creations Mamba X Extreme 1/10 scale Waterproof ESC,  with the 1410 3800Kv Brushless Motor. **Ideal for 1/10 scale 2WD and 4WD short course trucks up to 6.5lbs**  **using 2S LiPo power, and stadium trucks up to 4lbs using 2-3S LiPo power.**       FEATURES ESC;  2S - 6S input voltage range  Smartsense uses motor's sensors for smooth starts, excellent torque  and low-speed drivability - then transitions to the sensorless  mode with electronic timing, Smartsense automatically advances  timing for peak performance during all driving conditions  On-the-fly adjustments can be made through the AUX wire once enabled  in Castle Link, then settings can be tuned from transmitter while  driving  Recordable real-time data such as RPM, battery current and voltage,  ESC and motor temperature, throttle input and more  Audible alerts  CNC aluminum case  12AWG high strand count silicone insulated battery wires    Motor;  High-strength 180°C grade neodymium sintered magnets with high- strength wrap  High-temperature, high purity copper windings  High-performance 0.2mm steel lamination stacked stator  Vibration dampening wave spring on shaft  Rotor position sensor eliminates cogging and inconsistency during  startup  CNC machined 6061 T-6 aluminum endbells and motor can  13AWG high strand count silicone insulated wires with 4mm male bullet  connectors  Four pole configuration for maximum efficiency at high RPM  ROAR standard sensor port and labeled connections  Replaceable front end bell/bearing assembly and rotor/shaft assembly     INCLUDES Mamba X Extreme 1/10 scale Electronic Speed Control  Replaceable Wire Harness with Receiver Wire, AUX Wire, Fan Connector,  and Waterproof Switch  Replaceable Motor Sensor Harness  12AWG Battery Wires  Cooling Fan  4mm Gold Plated Male and Female Bullet Motor Connectors  1410 1Y 3800Kv 4-Pole Sensored Brushless Motor,  Sensor Wire  Three 3x5mm Socket Head Cap Screws     SPECIFICATIONS ESC, CSEM9500  Input Voltage Range: 2S - 6S LiPo  BEC: 5.5V, 6.0V, 7.5V. or 8.0V (8A Peak), default 5.5V  Programmable: Fully programmable with Castle Link USB Adapter, and  downloadable Castle Link Windows software  Telemetry Link Capable: Yes  Brake: Proportional  Reverse: Yes, may be disabled for racing  Cooling Fan: 1.2" (30mm) removable  Dimensions: 2.14 x 1.39 x 1.18" (54.4 x 35.2 x 30mm)  Max Recommended Vehicle Weight: 9lbs (4kg) with batteries, ready to  run  Motor; CSEC0065  Input Voltage Range: 2-3S LiPo  Kv: 3800  Max RPM: 100,000  Length: 2.1" (52.7mm)  Diameter: 1.4" (36mm)  Shaft Diameter: 1/8" (3.17mm)  Shaft Length: 0.61" (15.5mm)  Weight: 8.4oz (237g)  Mounting Hole Size: M3 @ 25mm     COMMENTS Waterproof under normal operation. Not intended for operation when  completely submerged in water.

3.795,-

3.995,-

KJØP
-5%
Hovedbilde Castle Creations Mamba X SCT Pro ESC/1410-3800kV 5mm
Castle Creations Mamba X SCT Pro ESC/1410-3800kV 5mm
Art.nr: 010-0161-01
Copied
This is the Castle Creations Mamba X Extreme 1/10 scale Waterproof ESC,  with the 1410 3800Kv Brushless Motor with 5mm Output Shaft. **Ideal for 1/10 scale 2WD and 4WD short course trucks up to 6.5lbs**  **using 2S LiPo power, and stadium trucks up to 4lbs using 2-3S LiPo power.**       FEATURES ESC;  2S - 6S input voltage range  Smartsense uses motor's sensors for smooth starts, excellent torque  and low-speed drivability - then transitions to the sensorless  mode with electronic timing, Smartsense automatically advances  timing for peak performance during all driving conditions  On-the-fly adjustments can be made through the AUX wire once enabled  in Castle Link, then settings can be tuned from transmitter while  driving  Recordable real-time data such as RPM, battery current and voltage,  ESC and motor temperature, throttle input and more  Audible alerts  CNC aluminum case  12AWG high strand count silicone insulated battery wires  Motor;  High-strength 180°C grade neodymium sintered magnets with high- strength wrap  High-temperature, high purity copper windings  High-performance 0.2mm steel lamination stacked stator  Vibration dampening wave spring on shaft  Rotor position sensor eliminates cogging and inconsistency during  startup  CNC machined 6061 T-6 aluminum endbells and motor can  13AWG high strand count silicone insulated wires with 4mm male bullet  connectors  Four pole configuration for maximum efficiency at high RPM  ROAR standard sensor port and labeled connections  Replaceable front end bell/bearing assembly and rotor/shaft assembly     INCLUDES Mamba X Extreme 1/10 scale Electronic Speed Control  Replaceable Wire Harness with Receiver Wire, AUX Wire, Fan Connector,  and Waterproof Switch  Replaceable Motor Sensor Harness  12AWG Battery Wires  Cooling Fan  4mm Gold Plated male and Female Bullet Motor Connectors  1410 1Y 3800Kv 4-Pole Sensored Brushless Motor,  Sensor Wire  Three 3x5mm Socket Head Cap Screws     SPECIFICATIONS ESC, CSEM9500  Input Voltage Range: 2S - 6S LiPo  BEC: 5.5V, 6.0V, 7.5V. or 8.0V (8A Peak), default 5.5V  Programmable: Fully programmable with Castle Link USB Adapter, and  downloadable Castle Link Windows software  Telemetry Link Capable: Yes  Brake: Proportional  Reverse: Yes, may be disabled for racing  Cooling Fan: 1.2" (30mm) removable  Dimensions: 2.14 x 1.39 x 1.18" (54.4 x 35.2 x 30mm)  Max Recommended Vehicle Weight: 9lbs (4kg) with batteries, ready to  run  Motor; CSEC6600  Input Voltage Range: 2-3S LiPo  Kv: 3800  Max RPM: 100,000  Length: 2.1" (52.7mm)  Diameter: 1.4" (36mm)  Shaft Diameter: 0.197" (5mm)  Shaft Length: 0.83" (21mm)  Weight: 8.4oz (237g)  Mounting Hole Size: M3 @ 25mm     COMMENTS Waterproof under normal operation. Not intended for operation when  completely submerged in water.

3.795,-

3.995,-

KJØP
-5%
Hovedbilde Castle Creations 010015505 Mamba X 25.2V WP ... Hovedbilde Castle Creations 010015505 Mamba X 25.2V WP ...
Castle Creations 010015505 Mamba X 25.2V WP ...
Art.nr: 010-0155-05
Copied
  MAMBA X ESC W / 1515-2200KV SENSORED 1/8 E-BUGGY EDITION The Mamba X represents the latest and greatest in Castle Creations Inc. ESC technology. Originally designed to overpower 1/10th scale buggies and trucks, the  ROAR APPROVED Mamba X also delivers amazing race capabilities for 1/8th scale eBuggy. After being extensively race-tested by Castle Creations' Lead Mechanical Engineer and Team Driver, Taylor James - the Mamba X has been approved for eBuggy racing with two of our most popular 15 Series Motors. This combo is a Mamba X ESC and 1515 1Y 2200kv motor for lighter 1/8th scale applications. Normally this motor is paired with our 1/8th scale Mamba Monster X ESC; but if you need to save some weight or need a smaller footprint, the Mamba X is more than capable of running this motor. This setup is recommended for 3s or 4s use in a vehicle weighing less than 4 kg and geared for no more than ~72 KPH. If you have a heavier vehicle, looking for more speed or just want to beat the ever loving snot out of your vehicle we would recommend picking up the Mamba Monster X combo (CC010-0145-03).   Waterproof: Yes Telemetry Capable: Yes Data Logging: Yes Auxiliary Wire: Yes Minimum Input Voltage: 3S Maximum Input Voltage: 4S Sensored Capable: Yes Coming in at just 101 grams the ROAR APPROVED Mamba X ESC packs features that will advance your game as a beginner or an expert on the track. You will POWER THROUGH extreme jumps and accidental collisions as the ESC is housed in a RUGGED CNC-MACHINED ALUMINUM CASE and then potted in waterproof epoxy. This not only protects the electronics but ensures any heat generated in the controller can easily be dissipated through the case. Combined with the IMPROVED 4-POLE 12-SLOT design of the sensored 1515 1Y 2200Kv (Awaiting ROAR approval ) motor, you will experience PRECISE THROTTLE CONTROL and BUTTERY SMOOTH starts, plus the RAW POWER and LONGER RUN TIMES that these highly efficient motors produce. CASTLE’S INDUSTRY LEADING SOFTWARE is the ticket to creating a perfect setup, even before you hit the track. Our latest firmware versions were developed with the top-level racer in mind. They offer unparalleled performance and drivability that will leave the competition in the dust. They also offer useful features to assist in getting the most out of your setup. The Mamba X captures and RECORDS PERFORMANCE DATA via the DATA LOGGING function and allows users to view a detailed record of what the ESC actually experienced during a run. Gearing your 1:8th E-Buggy will be a breeze as the data logging will measure and record the internal temperature of both the ESC circuit board and the motor to give you the most accurate analysis of gearing changes, allowing maximum optimization of both performance and battery life. There is no need to carry a temp gun around anymore. Dialing in to the track has never been so simple with the “ON-THE-FLY ADJUSTMENTS” to be made through the AUXILIARY WIRE on the Mamba X ESC. Once enabled in Castle Link, you can fine-tune your car speed to the track you’re on using the MAX POWER AUXILIARY WIRE MODE. This setting, and several more, are easily accessed right from your transmitter in REAL TIME, WHILE DRIVING! The advantages of being able to adjust your car speed while on the track, without having to physically change gearing, will result in more confidence on the track, despite its condition. The CASTLE sensored motors will catapult your competitive advantage with the use of SMARTSENSE™ and QUIETSENSE™ TECHNOLOGY. SMARTSENSE™ is enabled by default in the Castle programming suite, and will use the motor’s sensors to provide smooth starts, excellent torque, and low-speed drivability.  Once the motor is turning, it seamlessly transitions to Castle’s ULTRA-EFFICIENT sensorless mode with ELECTRONIC TIMING. When running, a motor must transition between different load points and a different timing advance is required for optimal efficiency at each. Electronic timing in SMARTSENSE™ will advance timing automatically for peak performance during all driving conditions. This combines the best of both worlds in an unrivaled HYBRID between smooth sensored startups and high-efficiency sensorless running.  This makes the Mamba X system produce more power and less heat, which are two ingredients every racer knows to be beneficial.  QUIETSENSE™ describes an innovative advancement in the design of sensored motors. It shields the sensors from magnetic field noise through the use of a FLUX SHIELD™ in conjunction with  secondary Sense Magnets delivering even HIGHER PRECISION and MORE EFFICIENT startups. In the end this remarkably robust design, combined with the indisputable leading software functionality that Castle engineers are known for, makes for the ultimate powerhouse for your 1:8th scale E-Buggy. ESC Features: Wide 2S to 6S input voltage range (3-4S LiPo MAX w/1515-2200KV MOTOR) Sensored Motor Support (Castle X-Series Sensor Harness Included) Waterproof 8A Adjustable BEC (5.25V-8.0V) Data-logging Rugged CNC Aluminum Case Castle Link Programming Support SmartSense™ Integrated Capacitors Removable 30 mm Cooling Fan Integrated 4 mm Bullet Connectors 12 AWG Power Wires Waterproof Switch Audible Alerts Motor Features: 4-POLE 12-SLOT Rebuildable Design QUIETSENSE™ Technology ROAR Standard Sensor Port and Labeled Connections High-Performance 0.2 mm Steel Lamination Stacked Stator High-Strength Kevlar Wrap High-Strength, 180° C Grade, Neodymium Sintered Magnets Oversized, Low-Resistance, Gold-Plated Solder Tabs Oversized NMB Bearings M3 and M4 @ 25mm Mounting Hole 4 mm male Castle Bullet Connectors 210 mm length Sensor Wire Optional cooling fan coming soon Silicone coated sensor board Technical Controller Specs: Input Voltage Range: MIN: 2S LiPo / MAX: 6S LiPo (25.2V) (Max 4s with included motor) BEC Specifications: Adjustable: 5.5V, 6.0V, 7.5V. or 8.0V (8A Peak), default 5.5V Operating Environment: Waterproof* design allows for use in nearly any environment. Brake: Proportional Reversible: Yes, but may be disabled for racing. On/Off Switch: Yes Cooling Fan: Yes, factory equipped (30 mm), fully removable** (see Product Use Statements below) Size: L54.4 x W35.2 x H30 mm Weight (with wires): 101 g Connectors: 4.0 mm female bullets for motor connection. Items Needed for Operation: Battery Connector required; Castle 6.5 mm Polarized Connectors, Castle 4.0 mm Polarized Connectors, Traxxas® Power Connectors, or Deans® Ultra Plugs are recommended. Product Use Statements: *Although Mamba X is waterproof, it is not intended for operation while completely submerged in liquid. Always rinse the ESC and motor with clean water after exposure to corrosives or dirt. While the motor and controller may be waterproof, we suggest users confirm that the rest of their vehicle, including the batteries, servos, radio and chassis are also waterproof before exposing them to liquids of any kind. **The cooling fan must be removed prior to driving in wet conditions. It is not waterproof. Application Guidelines: Intended for up to 4s (25.2 Volt) operation in vehicles weighing less than 9bs/4kg with 1515 - 2200kv motor. Max. Recommended Vehicle Weight: Less than 4kg, with batteries, ready-to-run. Programmability: Fully programmable Castle feature set using Castle Link USB adapter and freely downloadable Castle Link Windows software. Telemetry Link Capable: Yes Tech Notes: Mamba X setups frequently hit 100+ amps in peaks and not all LiPos are created equal. Surge ratings should never be used to determine a pack's suitability for a brushless application. Recommended battery capacity for 1:10th and 1:8th scale vehicles is 5000mAh. We recommend using 30C continuous discharge or higher LiPo batteries (or high quality 25C batteries such as Traxxas® Power Cell). Our experience suggests using only mild gear ratios with NiMH cells. Do not attempt to use NiMH cells in extreme setups. Applying voltages higher than 25.2V will cause irreparable damage to ESC. We recommend a high-current connector designed for high-powered electric systems, rated for 70+ amps. Invest in connector sets made for high-powered electric systems such as our Castle 6.5 mm Polarized Connectors, Castle 4.0 mm Polarized Connectors, Traxxas® Power Connectors or T-Plugs Motor: Input Voltage Range: 3-6S LiPo; 4s maximum with Mamba X ESC Kv: 2200 Max. RPM: 60,000 Size: Length: 75.4 mm / Diameter: 40 mm (41.4 mm with fins) Weight (w/wires): 429 g Shaft Size: Length: 20 mm / Diameter: 5 mm Mounting Hole Specifications: M3 and M4 @ 25 mm Cooling Fan: Optional, coming soon! Connectors: 4 mm male Castle Bullet Connectors on 12AWG wire, includes 210 mm length sensor wire. Application Guidelines: Ideal for 1/8 scale off-road and on-road vehicles as well as 1/10 scale 4WD SCT up to 4 kg on 4s LiPo. Max. Recommended Vehicle Weight: See application guidelines Tech Notes: Running modes: SMARTSENSE™, Sensored only Water Resistant Design: The sensor board is coated with silicone conformal coating to protect the sensors from moisture. The sensor connections are not water resistant; water can cause signal loss which could result in loss of sensored capabilities. Castle recommended applying dielectric grease to the outside of the sensor wire connections after installation of the wire. Routine maintenance is recommended after running in wet conditions. Please refer to this document for running and maintaining motors in wet environments.

4.395,-

4.595,-

KJØP
-4%
Hovedbilde Castle Creations 010015506 Mamba X 25.2V WP ... Hovedbilde Castle Creations 010015506 Mamba X 25.2V WP ...
Castle Creations 010015506 Mamba X 25.2V WP ...
Art.nr: 010-0155-06
Copied
  MAMBA X ESC WITH 1512-1800KV SENSORED 1/8 E-BUGGY EDITION The Mamba X represents the latest and greatest in Castle Creations Inc. ESC technology. Originally designed to overpower 1/10th scale buggies and trucks, the  ROAR APPROVED Mamba X also delivers amazing race capabilities for 1/8th scale eBuggy. After being extensively race-tested by Castle Creations' Lead Mechanical Engineer and Team Driver, Taylor James - the Mamba X has been approved for eBuggy racing with two of our most popular 15 Series Motors. This combo is a Mamba X ESC and 1512-1.5Y 1800kv motor for lighter 1/8th scale applications. Normally this motor is paired with our 1/8th scale Mamba Monster X ESC; but if you need to save some weight or need a smaller footprint, the Mamba X is more than capable of running this motor. This setup is recommended for 3s or 4s use in a vehicle weighing less than 4 kg and geared for no more than ~72 KPH. If you have a heavier vehicle, looking for more speed or just want to beat the ever loving snot out of your vehicle we would recommend picking up the Mamba Monster X combo (CC010-0145-05).   Waterproof : Yes Telemetry Capable : Yes Data Logging : Yes Auxiliary Wire : Yes Minimum Input Voltage : 3S Maximum Input Voltage : 4S Sensored Capable : Yes Coming in at just 101 grams the ROAR APPROVED Mamba X ESC packs features that will advance your game as a beginner or an expert on the track. You will POWER THROUGH extreme jumps and accidental collisions as the ESC is housed in a RUGGED CNC-MACHINED ALUMINUM CASE and then potted in waterproof epoxy. This not only protects the electronics but ensures any heat generated in the controller can easily be dissipated through the case. Combined with the IMPROVED 4-POLE 12-SLOT design of the sensored 1512 1.5Y 1800Kv (Awaiting ROAR approval) motor, you will experience PRECISE THROTTLE CONTROL and BUTTERY SMOOTH starts, plus the RAW POWER and LONGER RUN TIMES that these highly efficient motors produce. CASTLE’S INDUSTRY LEADING SOFTWARE is the ticket to creating a perfect setup, even before you hit the track. Our latest firmware versions were developed with the top-level racer in mind. They offer unparalleled performance and drivability that will leave the competition in the dust. They also offer useful features to assist in getting the most out of your setup. The Mamba X captures and RECORDS PERFORMANCE DATA via the DATA LOGGING function and allows users to view a detailed record of what the ESC actually experienced during a run. Gearing your 1:8th E-Buggy will be a breeze as the data logging will measure and record the internal temperature of both the ESC circuit board and the motor to give you the most accurate analysis of gearing changes, allowing maximum optimization of both performance and battery life. There is no need to carry a temp gun around anymore. Dialing in to the track has never been so simple with the “ON-THE-FLY ADJUSTMENTS” to be made through the AUXILIARY WIRE on the Mamba X ESC. Once enabled in Castle Link, you can fine-tune your car speed to the track you’re on using the MAX POWER AUXILIARY WIRE MODE. This setting, and several more, are easily accessed right from your transmitter in REAL TIME, WHILE DRIVING! The advantages of being able to adjust your car speed while on the track, without having to physically change gearing, will result in more confidence on the track, despite its condition. The CASTLE sensored motors will catapult your competitive advantage with the use of SMARTSENSE™ and QUIETSENSE™ TECHNOLOGY. SMARTSENSE™ is enabled by default in the Castle programming suite, and will use the motor’s sensors to provide smooth starts, excellent torque, and low-speed drivability.  Once the motor is turning, it seamlessly transitions to Castle’s ULTRA-EFFICIENT sensorless mode with ELECTRONIC TIMING. When running, a motor must transition between different load points and a different timing advance is required for optimal efficiency at each. Electronic timing in SMARTSENSE™ will advance timing automatically for peak performance during all driving conditions. This combines the best of both worlds in an unrivaled HYBRID between smooth sensored startups and high-efficiency sensorless running.  This makes the Mamba X system produce more power and less heat, which are two ingredients every racer knows to be beneficial.  QUIETSENSE™ describes an innovative advancement in the design of sensored motors. It shields the sensors from magnetic field noise through the use of a FLUX SHIELD™ in conjunction with  secondary Sense Magnets delivering even HIGHER PRECISION and MORE EFFICIENT startups. In the end this remarkably robust design, combined with the indisputable leading software functionality that Castle engineers are known for, makes for the ultimate powerhouse for your 1/8th scale E-Buggy. ESC Features: Wide 2S to 6S input voltage range (3-4S LiPo MAX w/1512-1800KV MOTOR) Sensored Motor Support (Castle X-Series Sensor Harness Included) Waterproof 8A Adjustable BEC (5.25V-8.0V) Data-logging Rugged CNC Aluminum Case Castle Link Programming Support SmartSense™ Integrated Capacitors Removable 30 mm Cooling Fan Integrated 4 mm Bullet Connectors 12 AWG Power Wires Waterproof Switch Audible Alerts Motor Features: 4-POLE 12-SLOT Rebuildable Design QUIETSENSE™ Technology ROAR Standard Sensor Port and Labeled Connections High-Performance 0.2 mm Steel Lamination Stacked Stator High-Strength Kevlar Wrap High-Strength, 180° C Grade, Neodymium Sintered Magnets Oversized, Low-Resistance, Gold-Plated Solder Tabs Oversized NMB Bearings M3 and M4 @ 25mm Mounting Hole 4 mm male Castle Bullet Connectors 210 mm length Sensor Wire Optional cooling fan coming soon Silicone coated sensor board Technical Controller Specs: Input Voltage Range: MIN: 2S LiPo / MAX: 6S LiPo (25.2V) (Max 4s with included motor) BEC Specifications: Adjustable: 5.5V, 6.0V, 7.5V. or 8.0V (8A Peak), default 5.5V Operating Environment: Waterproof* design allows for use in nearly any environment. Brake: Proportional Reversible: Yes, but may be disabled for racing. On/Off Switch: Yes Cooling Fan: Yes, factory equipped (30 mm), fully removable** (see Product Use Statements below) Size: L54.4 x W35.2 x H30 mm Weight (with wires): 101 g Connectors: 4.0 mm female bullets for motor connection. Items Needed for Operation: Battery Connector required; Castle 6.5 mm Polarized Connectors, Castle 4.0 mm Polarized Connectors, Traxxas® Power Connectors, or Deans® Ultra Plugs are recommended. Product Use Statements: *Although Mamba X is waterproof, it is not intended for operation while completely submerged in liquid. Always rinse the ESC and motor with clean water after exposure to corrosives or dirt. While the motor and controller may be waterproof, we suggest users confirm that the rest of their vehicle, including the batteries, servos, radio and chassis are also waterproof before exposing them to liquids of any kind. **The cooling fan must be removed prior to driving in wet conditions. It is not waterproof. Application Guidelines: Intended for up to 4s (25.2 Volt) operation in vehicles weighing less than 9bs/4kg with 1515 - 2200kv motor. Max. Recommended Vehicle Weight: Less than 4kg, with batteries, ready-to-run. Programmability: Fully programmable Castle feature set using Castle Link USB adapter and freely downloadable Castle Link Windows software. Telemetry Link Capable: Yes Tech Notes: Mamba X setups frequently hit 100+ amps in peaks and not all LiPos are created equal. Surge ratings should never be used to determine a pack's suitability for a brushless application. Recommended battery capacity for 1:10th and 1:8th scale vehicles is 5000mAh. We recommend using 30C continuous discharge or higher LiPo batteries (or high quality 25C batteries such as Traxxas® Power Cell). Our experience suggests using only mild gear ratios with NiMH cells. Do not attempt to use NiMH cells in extreme setups. Applying voltages higher than 25.2V will cause irreparable damage to ESC. We recommend a high-current connector designed for high-powered electric systems, rated for 70+ amps. Invest in connector sets made for high-powered electric systems such as our Castle 6.5 mm Polarized Connectors, Castle 4.0 mm Polarized Connectors, Traxxas® Power Connectors or T-Plugs Motor: Input Voltage Range: 3-6S LiPo; 4s maximum with Mamba X ESC Kv: 2200 Max. RPM: 60,000 Size: Length: 67.7 mm / Diameter: 40 mm (41.4 mm with fins) Weight (w/wires): 385 g Shaft Size: Length: 20 mm / Diameter: 5 mm Mounting Hole Specifications: M3 and M4 @ 25 mm Cooling Fan: Optional, coming soon! Connectors: 4 mm male Castle Bullet Connectors on 12AWG wire, includes 210 mm length sensor wire. Application Guidelines: Ideal for 1/8 scale off-road and on-road vehicles as well as 1/10 scale 4WD SCT up to 4 kg on 4s LiPo. Max. Recommended Vehicle Weight: See application guidelines Tech Notes: Running modes: SMARTSENSE™, Sensored only Water Resistant Design: The sensor board is coated with silicone conformal coating to protect the sensors from moisture. The sensor connections are not water resistant; water can cause signal loss which could result in loss of sensored capabilities. Castle recommended applying dielectric grease to the outside of the sensor wire connections after installation of the wire. Routine maintenance is recommended after running in wet conditions. Please refer to this document for running and maintaining motors in wet environments.

4.395,-

4.595,-

KJØP
-4%
Hovedbilde Castle Creations SIDEWINDER 4 12.6V ESC WP Combo ... Hovedbilde Castle Creations SIDEWINDER 4 12.6V ESC WP Combo ...
Castle Creations SIDEWINDER 4 12.6V ESC WP Combo ...
Art.nr: 010-0164-07
Copied
Castle Creations SW4 SENSORLESS ESC & 1415-2400KV Motor Combo (with 1/8" shaft) While the all new SIDEWINDER 4™ builds upon Castle’s most popular platform, the SIDEWINDER 1/10 SCALE SERIES, it is the first of its kind to run Castle’s newest technology, CRYO-DRIVE™. CRYO-DRIVE™ combines technology from cutting-edge hardware and software advancements to increase thermal performance. COOLER TEMPS mean LONGER RUNS and MORE POWER in your SIDEWINDER 4 setup.   Waterproof : Yes Telemetry Capable : Yes Data Logging : No Auxiliary Wire : No Minimum Input Voltage : 2S Maximum Input Voltage : 3S Sensored Capable : No Recon G6 Certified ESC : No ROAR Certified ESC : No Additional Features: 2s - 3s LiPo; 6 - 8 cell NiMH use in vehicles up 6.5lbs with battery, ready-to-run. Sensorless brushless and/or brushed motor operation. Waterproof design ESC and splash resistant 30MM fan* 5.0 volts fixed, 2 amps Peak BEC Audible alerts for error conditions Enhanced drag brake functionality Smoother sensorless startups Convenient transmitter programming for six common adjustable settings Additional settings and software updates available via Windows®-based Castle Link software and USB adapter (sold separately) or via Field Link Card (sold separately) Telemetry Link compatible for Futaba® S.BUS2 (sold separately) The SIDEWINDER 4 is a versatile ESC and is accepted in a wide variety of applications. Whether throwing dirt, ripping through a corner or steadily dominating the trails, we’ve got you covered! The Sidewinder 4 is available as: ESC only for rock crawling applications with brushed** motor down to 19 turn. ESC only for use with your existing Castle 1406, 1410 or 1415 4-Pole brushless motor ESC and motor combo packages, bundled with our 1406, 1410 and 1415 4-Pole brushless motors Now with Cryo-Drive! Cryo-Drive technology is the result of Castle Creations' software and electrical engineers putting their heads together to improve the thermal performance of the well-known Sidewinder 3 electronic speed control. Castle has developed new software that minimizes the amount of time the ESC's electrical components spend generating heat by optimally controlling which components are being used while driving the motor. This is happening thousands of times per second, which greatly reduces the rate at which the Sidewinder 4 heats up. Overall, the Sidewinder 4 generates heat much slower than previous versions. This software breakthrough has been coupled with a completely re-designed case. A great deal of time was spent studying fluid dynamics simulations in order to optimize the airflow through the case. Improving the airflow into and out of the case, allows the cooling fan to become more effective. In order to take full advantage of the improved airflow efficiencies, a 44% larger, higher flowrate 30mm fan was selected. The improved case coupled with the 30mm fan significantly increases the Sidewinder 4's ability to remove heat from critical components, such as MOSFETs and capacitors. By reducing the rate at which the Sidewinder 4 heats up and removing heat more efficiently, Cryo-Drive takes thermal performance to a whole new level. The Sidewinder 4 allows users to push beyond the limits of previous generation Sidewinders by handling higher gear ratios in heavier vehicles with longer runs. *Not intended for operation while submerged in liquid. If unit is operated in wet conditions, rinse with fresh water to remove dirt or corrosives, then fully dry unit. **Brushed motors are recommended for rock crawlers (vehicles traveling 3-5mph.) Brushless motors are fine for use with rock racing. If your vehicle is going to be in a bound up situation, very slowly traversing rocks and obstacles, you are running a rock crawler. If you are constantly traveling at 5mph or higher, you have a rock racer. Castle Link Compatible With the optional Castle Link USB Programming Kit you can use your Windows™ PC to easily program your controller. Adjustable settings include: Throttle curve Braking curve Drag brake Auto LiPo cutoff Punch Control Reverse Type Motor Type Additional Castle Link benefits include: Access to all firmware updates, including added features sets released from Castle Engineering, at no charge. Intuitive Demo Mode capability. Ability to save setup profiles for later use. Combo with Castle 1415-2400KV Motor with 5 mm shaft: For short course trucks running on 3s LiPo and weighing up to 2.9kg; it can be run on a 2s LiPo but will be slow. It is a cooling running torque animal for lighter 1/10th scale 2WD stadium trucks and buggies running on a 3s LiPo. Motor Technical Specs: Input Voltage Range: 2-3S LiPo Kv: 2400 Max. RPM: 100,000 Length: 69.5mm Diameter: 36mm Weight (w/wires): 318g Shaft Length: 15mm Shaft Diameter: 1/8" (3.17mm) Mounting Hole Specifications: M3 @ 25mm Cooling Fan: Optional- Coming Soon! Connectors: 4mm male Castle Bullet Connectors Application Guidelines: For short course trucks running on 3s LiPo and weighing up to 2.9kg; it can be run on a 2s LiPo but it will be slow. It is a cooling running torque animal for lighter 1/10th scale 2WD stadium trucks and buggies running up to a 3s LiPo Please refer to our Gearing Chart for recommended motor, battery and gearing for some of the more popular vehicles on the market. Max. Recommended Vehicle Weight: 2.9 kg Tech Notes:  Monitor motor temperatures closely; overheating a motor will cause permanent damage to the magnets. Never exceed 180° F on the the motor or ESC.   Water Resistant Design: Routine maintenance is recommended after running in wet conditions. Please refer to this document for running and maintaining motors in wet environments.

2.495,-

2.695,-

KJØP
-7%
Hovedbilde Castle Creations 010016405 SIDEWINDER 4 12.6V ESC WP ... Hovedbilde Castle Creations 010016405 SIDEWINDER 4 12.6V ESC WP ...
Castle Creations 010016405 SIDEWINDER 4 12.6V ESC WP ...
Art.nr: 010-0164-05
Copied
Castle Creations SW4 SENSORLESS ESC & 1410-3800KV Motor Combo (with 1/8" shaft) While the all new SIDEWINDER 4™ builds upon Castle’s most popular platform, the SIDEWINDER 1/10 SCALE SERIES, it is the first of its kind to run Castle’s newest technology, CRYO-DRIVE™. CRYO-DRIVE™ combines technology from cutting-edge hardware and software advancements to increase thermal performance. COOLER TEMPS mean LONGER RUNS and MORE POWER in your SIDEWINDER 4 setup.   Waterproof : Yes Telemetry Capable : Yes Data Logging : No Auxiliary Wire : No Minimum Input Voltage : 2S Maximum Input Voltage : 3S Sensored Capable : No Recon G6 Certified ESC : No ROAR Certified ESC : No Additional Features: 2s - 3s LiPo; 6 - 8 cell NiMH use in vehicles up 6.5lbs with battery, ready-to-run. Sensorless brushless and/or brushed motor operation. Waterproof design ESC and splash resistant 30MM fan* 5.0 volts fixed, 2 amps Peak BEC Audible alerts for error conditions Enhanced drag brake functionality Smoother sensorless startups Convenient transmitter programming for six common adjustable settings Additional settings and software updates available via Windows®-based Castle Link software and USB adapter (sold separately) or via Field Link Card (sold separately) Telemetry Link compatible for Futaba® S.BUS2 (sold separately) The SIDEWINDER 4 is a versatile ESC and is accepted in a wide variety of applications. Whether throwing dirt, ripping through a corner or steadily dominating the trails, we’ve got you covered! The Sidewinder 4 is available as: ESC only for rock crawling applications with brushed** motor down to 19 turn. ESC only for use with your existing Castle 1406, 1410 or 1415 4-Pole brushless motor ESC and motor combo packages, bundled with our 1406, 1410 and 1415 4-Pole brushless motors Now with Cryo-Drive! Cryo-Drive technology is the result of Castle Creations' software and electrical engineers putting their heads together to improve the thermal performance of the well-known Sidewinder 3 electronic speed control. Castle has developed new software that minimizes the amount of time the ESC's electrical components spend generating heat by optimally controlling which components are being used while driving the motor. This is happening thousands of times per second, which greatly reduces the rate at which the Sidewinder 4 heats up. Overall, the Sidewinder 4 generates heat much slower than previous versions. This software breakthrough has been coupled with a completely re-designed case. A great deal of time was spent studying fluid dynamics simulations in order to optimize the airflow through the case. Improving the airflow into and out of the case, allows the cooling fan to become more effective. In order to take full advantage of the improved airflow efficiencies, a 44% larger, higher flowrate 30mm fan was selected. The improved case coupled with the 30mm fan significantly increases the Sidewinder 4's ability to remove heat from critical components, such as MOSFETs and capacitors. By reducing the rate at which the Sidewinder 4 heats up and removing heat more efficiently, Cryo-Drive takes thermal performance to a whole new level. The Sidewinder 4 allows users to push beyond the limits of previous generation Sidewinders by handling higher gear ratios in heavier vehicles with longer runs. *Not intended for operation while submerged in liquid. If unit is operated in wet conditions, rinse with fresh water to remove dirt or corrosives, then fully dry unit. **Brushed motors are recommended for rock crawlers (vehicles traveling 3-5mph.) Brushless motors are fine for use with rock racing. If your vehicle is going to be in a bound up situation, very slowly traversing rocks and obstacles, you are running a rock crawler. If you are constantly traveling at 5mph or higher, you have a rock racer. Castle Link Compatible With the optional Castle Link USB Programming Kit you can use your Windows™ PC to easily program your controller. Adjustable settings include: Throttle curve Braking curve Drag brake Auto LiPo cutoff Punch Control Reverse Type Motor Type Additional Castle Link benefits include: Access to all firmware updates, including added features sets released from Castle Engineering, at no charge. Intuitive Demo Mode capability. Ability to save setup profiles for later use. Combo with Castle 1410-3800KV Motor with 1/8" shaft: For short course trucks running on 2s LiPo and weighing up to 2.9kg; it can be run on a 3s LiPo with very conservative gearing. It is a cooling running torque animal for lighter 1/10th scale 2WD stadium trucks and buggies running up to a 3s LiPo. Motor Technical Specs: Input Voltage Range: 2-3S LiPo Kv: 3800 Max. RPM: 100,000 Length: 52.7mm Diameter: 36mm Weight (w/wires): 237g Shaft Length: 15mm Shaft Diameter: 1/8" (3.17mm) Mounting Hole Specifications: M3 @ 25mm Cooling Fan: Optional- Coming Soon! Connectors: 4mm male Castle Bullet Connectors Application Guidelines: For short course trucks running on 2s LiPo and weighing up to 2.9kg; it can be run on a 3s LiPo with very conservative gearing. It is a cooling running torque animal for lighter 1/10th scale 2WD stadium trucks and buggies running up to a 3s LiPo. Please refer to our Gearing Chart for recommended motor, battery and gearing for some of the more popular vehicles on the market. Max. Recommended Vehicle Weight: 2.9 kg Tech Notes:  Monitor motor temperatures closely; overheating a motor will cause permanent damage to the magnets. Never exceed 180° F on the the motor or ESC. Water Resistant Design: Routine maintenance is recommended after running in wet conditions. Please refer to this document for running and maintaining motors in wet environments.  

1.990,-

KJØP
Hovedbilde Castle Creations MAMBA MONSTER X 8S, 33.6V ESC W / ... Hovedbilde Castle Creations MAMBA MONSTER X 8S, 33.6V ESC W / ...
Castle Creations MAMBA MONSTER X 8S, 33.6V ESC W / ...
Art.nr: 010-0165-02
Copied
Castle Creations MAMBA MONSTER X 8S, 33.6V ESC W / 1717-1650KV   MORE POWER - COOLER TEMPS - LONGER RUNS       Take your scale build or upgrade to the next level with Castle’s legendary brushless power. The MAMBA MONSTER X 8S, 33.6V ESC W/1717-1650KV SENSORED COMBO is a perfect upgrade for heavier 1:8th vehicles and lighter 1:6th vehicles weighing up to 20 lbs. and running up to 8S LiPo.   RACER TESTED - BASHER APPROVED   Drive fearlessly and punch that throttle! The MAMBA MONSTER X 8S utilizes Castle’s breakthrough technology CRYO-DRIVE™.  By reducing the rate at which the ESC heats up and removing heat more efficiently, your setup will be able to handle higher gear ratios, in heavier vehicles, with longer runs.  These software advancements work in parallel with a unique open housing design to allow increased directional airflow to cool critical components. With the integration of a 40mm cooling fan and a forged elliptical fin heatsink, the design maximizes airflow throughout the system, taking thermal performance to a whole new level. High-performance demands high quality and this ESC was designed with durability in mind. Constructed around a robust aluminum casing, the epoxy potting guarantees protection around the circuitry and ensures all-weather use. Mamba Monster X 8S is a workhorse, it will dominate in the harshest of environments. You can easily optimize the ESC for any driving condition, from rugged terrain to smooth pavement to the perils of rock and gravel. Create, save and download setup profiles through the Castle Link Programming Suite on your Windows™ PC, or wirelessly with the convenience of the new B-Link™ Bluetooth™ Adapter and Castle Link app for Android or iOS.  Additional tuning flexibility awaits you with on-the-fly adjustments from your transmitter via the Auxiliary wire. Simply connect the white signal wire to an open radio channel, and enable the feature in Castle Link by selecting what Auxiliary function you would like to use. Access programming parameters such as Torque Control, Max Brake or Rock Race Mode. Optimize your vehicle for any racing or bashing application you can imagine! When paired with the newly released Castle 1717-1650KV, users with heavy, high speed rigs will experience controllable low-end ranges without sacrificing power, punch or speed.  SmartSense™ mode uses the motor’s sensors to start the motor to provide smooth starts, excellent torque, and low-speed drivability. Once the motor is spinning, it seamlessly transitions to Castle’s ultra-efficient sensorless mode. You’ll put more power to the ground, where it should be, instead of wasting it through raw heat and RPMs. Whether you are burning out, dropping the hammer, trigger happy, powering out, on-the rocks, off-the-rocks, wheeling or mud bogging - MAMBA MONSTER X 8S is ready to test the limits of your R/C car or truck.   FEATURES:   Input Voltage Range 2S-8S LiPo Sensorless, Sensored and SmartSense™ Running Modes Powerful Integrated 8A Peak Adjustable BEC (5.25V-8.0V) CRYO-DRIVE™ Technology minimizes the amount of time the ESC’s electrical components spend generating heat, resulting in improved thermal performance during partial throttle operation where the majority of driving occurs ESC is housed in a rugged CNC aluminum case and potted in waterproof epoxy to  protect the electronics and promote efficient heat transfer Premium forged heatsink with elliptical fins for superior air flow and increased heat dissipation Oversized factory equipped thermally controlled 40MM cooling fan Compatible with S.BUS2 Telemetry Link and Futaba T4PX and T7PX transmitters Waterproof design for all weather conditions Data logging capability to capture and record performance data from your vehicle Auxiliary wire functionality for "on-the-fly" adjustments using your transmitter Audible alerts for easy diagnosis of common issues such as motor-over-temperature and low-voltage cutoff Convenient transmitter programming for six common adjustable settings including cutoff voltage and drag brake Easily tune and update ESC with USB and Bluetooth™ programming options Castle Link USB programming kit (coupon included with purchase) Optional smartphone-based programming with the B-LINK™ Bluetooth Adapter (sold separately) and Castle Link app available on Google Play or Apple App Store Proudly designed and manufactured in Olathe, KS USA and backed by Castle Creations' 1-year warranty MOTOR FEATURES:     4-POLE 12-SLOT sensored design that boasts exceptional efficiency and produces less heat Proprietary stator winding produces low internal resistance for a cooler running motor Oversized NMB bearings and vibration dampening system ensure the longest possible bearing life High-strength, high-temperature grade neodymium sintered magnets combined with high-strength Kevlar wrap ensures the integrity of the rotor is not compromised during harsh running conditions and high RPMs   MAMBA MONSTER X 8S, 33.6V ESC W/1717-1650KV SENSORED COMES WITH: Mamba Monster X 8S ESC 4-POLE Sensored 1717-1650KV Motor Castle Sensor Harness Adapter 200mm Sensor Wire Mamba Decals Coupon for free Castle Link USB ESC Quick Start Guide Motor Quick Start Guide

5.995,-

6.395,-

KJØP
-6%
Hovedbilde Castle Creations 010016501 Mamba Monster X 8S 33,6V ... Hovedbilde Castle Creations 010016501 Mamba Monster X 8S 33,6V ...
Castle Creations 010016501 Mamba Monster X 8S 33,6V ...
Art.nr: 010-0165-01
Copied
Castle Creations 010016501 Mamba Monster X 8S 33,6V 2028-800kV Sensor combo. MORE POWER - COOLER TEMPS - LONGER RUNS Take your 1:6th scale build or upgrade to the next level with Castle’s legendary brushless power. The MAMBA MONSTER X 8S, 33.6V ESC W/2028-800KV SENSORED COMBO is ready to take on any R/C vehicle weighing up to 25lbs, and running up to 8S LiPo.  Designed for heavy, high speed rigs, you'll experience controllable low-end ranges, without sacrificing power, punch, or speed.  Note: This is not a direct replacement to the Mamba XLX2. The XLX2 still handles rawer full throttle power in the most extreme setups.   RACER TESTED - BASHER APPROVED Drive fearlessly and punch that throttle! The MAMBA MONSTER X 8S utilizes Castle’s breakthrough technology CRYO-DRIVE™.  By reducing the rate at which the ESC heats up and removing heat more efficiently, your setup will be able to handle higher gear ratios, in heavier vehicles, with longer runs.  These software advancements work in parallel with a unique open housing design to allow increased directional airflow to cool critical components. With the integration of a 40mm cooling fan and a forged elliptical fin heatsink, the design maximizes airflow throughout the system, taking thermal performance to a whole new level. High-performance demands high quality and this ESC was designed with durability in mind. Constructed around a robust aluminum casing, the epoxy potting guarantees protection around the circuitry and ensures all-weather use. Mamba Monster X 8S is a workhorse, it will dominate in the harshest of environments. You can easily optimize the ESC for any driving condition, from rugged terrain to smooth pavement to the perils of rock and gravel. Create, save and download setup profiles through the Castle Link Programming Suite on your Windows™ PC, or wirelessly with the convenience of the new B-Link™ Bluetooth™ Adapter and Castle Link app for Android or iOS.  Additional tuning flexibility awaits you with on-the-fly adjustments from your transmitter via the Auxiliary wire. Simply connect the white signal wire to an open radio channel, and enable the feature in Castle Link by selecting what Auxiliary function you would like to use. Access programming parameters such as Torque Control, Max Brake or Rock Race Mode. Optimize your vehicle for any racing or bashing application you can imagine! When paired with the newly updated Castle  2028-800KV, users with heavy, high speed rigs will experience controllable low-end ranges without sacrificing power, punch or speed.  SmartSense™ mode uses the motor’s sensors to start the motor to provide smooth starts, excellent torque, and low-speed drivability. Once the motor is spinning, it seamlessly transitions to Castle’s ultra-efficient sensorless mode. You’ll put more power to the ground, where it should be, instead of wasting it through raw heat and RPMs. Whether you are burning out, dropping the hammer, trigger happy, powering out, on-the rocks, off-the-rocks, wheeling or mud bogging - MAMBA MONSTER X 8S is ready to test the limits of your R/C car or truck.   FEATURES: Input Voltage Range 2S-8S LiPo Sensorless, Sensored and SmartSense™ Running Modes Powerful Integrated 8A Peak Adjustable BEC (5.25V-8.0V) CRYO-DRIVE™ Technology minimizes the amount of time the ESC’s electrical components spend generating heat, resulting in improved thermal performance during partial throttle operation where the majority of driving occurs ESC is housed in a rugged CNC aluminum case and potted in waterproof epoxy to  protect the electronics and promote efficient heat transfer Premium forged heatsink with elliptical fins for superior air flow and increased heat dissipation Oversized factory equipped thermally controlled 40MM cooling fan Compatible with S.BUS2 Telemetry Link and Futaba T4PX and T7PX transmitters Waterproof design for all weather conditions Data logging capability to capture and record performance data from your vehicle Auxiliary wire functionality for "on-the-fly" adjustments using your transmitter Audible alerts for easy diagnosis of common issues such as motor-over-temperature and low-voltage cutoff Convenient transmitter programming for six common adjustable settings including cutoff voltage and drag brake Easily tune and update ESC with USB and Bluetooth™ programming options Castle Link USB programming kit (coupon included with purchase) Optional smartphone-based programming with the B-LINK™ Bluetooth Adapter (sold separately) and Castle Link app available on Google Play or Apple App Store Proudly designed and manufactured in Olathe, KS USA and backed by Castle Creations' 1-year warranty   MOTOR FEATURES: 4-POLE 12-SLOT sensored design that boasts exceptional efficiency and produces less heat Proprietary stator winding produces low internal resistance for a cooler running motor Dual sensor ports to ensure optimal installation in your large-scale vehicle Oversized NMB bearings and vibration dampening system ensure the longest possible bearing life High-strength, high-temperature grade neodymium sintered magnets combined with high-strength Kevlar wrap ensures the integrity of the rotor is not compromised during harsh running conditions and high RPMs   MAMBA MONSTER X 8S, 33.6V ESC W/2028-800KV SENSORED COMES WITH: Mamba Monster X 8S ESC 4-POLE Sensored 2028-800KV Motor Castle Sensor Harness Adapter 250mm Sensor Wire Mamba Decals Coupon for free Castle Link USB ESC Quick Start Guide Motor Quick Start Guide   Application: Car Motor Type: Brushless kV Value: 800 kV Motor diameter: 56,3 mm Motor length: 112,7 mm Shaft length: 30 mm Shaft Diameter: 8 mm Weight: 1250 gram Max Rev.: 45000 rpm Connector: 8mm Bullet Max voltage: 44,4 V Special: Sensor-based  

6.495,-

6.995,-

KJØP
-7%
Hovedbilde Castle Creation Mamba Monster X 8S 33,6V 1520-1650KV ... Hovedbilde Castle Creation Mamba Monster X 8S 33,6V 1520-1650KV ...
Castle Creation Mamba Monster X 8S 33,6V 1520-1650KV ...
Art.nr: CC010-0165-04
Copied
Castle Mamba Monster-X-8S, 33.6V ESC & 1520-1650Kv Sensor Motor Combo MORE POWER - COOLER TEMPS - LONGER RUNS Take your 1/6 scale build or upgrade to the next level with Castle’s legendary brushless power.   Waterproof : Yes Telemetry Capable : Yes Data Logging : Yes Auxiliary Wire : Yes Minimum Input Voltage : 2S Maximum Input Voltage : 8S Sensored Capable : Yes Recon G6 Certified ESC : No ROAR Certified ESC : No CRYO-DRIVE : Yes ESC Specs: Applications: 1/6 Scale vehicles weighing up to 11kg (see motor specs for this combo!) Input Voltage Range: MIN: 2S LiPo, MAX: 8S LiPo 33.6V Running Modes: Sensored, Sensorless and SmartSense™ when paired with a Castle 4-POLE 12-SLOT Sensored Motor. Brake: Proportional Reversible: Yes, but may be disabled for racing. On/Off Switch: Yes, waterproof Cooling Fan: Yes, factory equipped (40mm), fully removable** (see Product Use Statements below) Size (LxWxH): 69.5x54.1x47mm Weight (with wires): 163gr Connectors type: 6.5mm female bullets for motor connection Items Needed for Operation: A high current connector designed for high-powered electric systems, rated for 120+ amps, such as Castle CC Bullet 6.5mm, CC Bullet 8.0mm, or 6.5mm Polarized Castle Connectors, soldered to the battery leads. Operating environment: Waterproof design for all weather conditions Programmability: Fully programmable Castle feature set using Castle Link USB adapter(coupon for free link included in package) and freely downloadable Castle Link Windows software, or the Castle Link App and a B-LINK Bluetooth Adapter (sold separately). Telemetry Link Capable: Yes, with Castle Creations Telemetry Link for S.BUS2 and Futaba T4PX and T7PX Transmitters. Product Use Statements: Recommended battery capacity for 1:6th scale vehicles is 5000mah. We recommend using 50C continuous discharge or higher LiPo batteries. Surge ratings should never be used to determine a pack’s suitability for a brushless application. We recommend a high current connector designed for high-powered electric systems, rated for 120+ amps, such as Castle CC Bullet 6.5mm, CC Bullet 8.0mm, or 6.5mm Polarized Castle Connectors. Applying voltages higher than 33.6V will cause irreparable damage to ESC; DO NOT RUN HV CELLS (above 4.2v/cell) WHEN RUNNING AT MAX CELL COUNT (8s). This will exceed the 33.6v rating and will damage the ESC and not be covered by the warranty. Although Mamba Monster X 8S is waterproof, it is not intended for operation while completely submerged in liquid. Always rinse the ESC with clean water after exposure to corrosives or dirt. The cooling fan must be removed prior to driving in wet conditions. It is not waterproof. Motor Specs: Input Voltage Range: 3S-8S Kv: 1650 Max. RPM: 60,000 Size: Length: 88.8mm Diameter: 41.6mm Weight (w/wires): 508g Diameter: 5mm Mounting Hole Specifications: M3 & M4@25.4mm Connectors: 6.5mm male connectors Applications: Mamba Monster X 8S and 1520-1650Kv motor is intended for use in 1/6, 1/7 and 1/8 scale vehicles weighing up to 18 lbs. and running up to 8s LiPo. Examples include Losi LST2-E™; Arrma™: Limitless™, Typhon™ 6s, Kraton 6s™, Kraton EXB™, Infraction™ Felony™ 6s, Notorious 6s™, Talion™ 6s; Kyosho Inferno™, Traxxas: E-Maxx™, E-Revo™, UDR™, Summit™; Redcat Shredder™ Tech Notes: This motor includes 10AWG wire and 6.5mm connectors for use specifically this ESC/Motor combo. Running modes: SMARTSENSE™, Sensored, Sensorless with Castle sensored capable ESCs. Do not use mounting screws that extend more than 5mm into the front of the motor. Using too long of a screw can result in damage to the motor's windings and will not be covered by the warranty. Water Resistant Design: The sensor board is coated with silicone conformal coating to protect the sensors from moisture. The sensor connections are not water resistant; water can cause signal loss which could result in loss of sensored capabilities. Castle recommended applying dielectric grease to the outside of the sensor wire connections after installation of the wire. Routine maintenance is recommended after running in wet conditions. Please refer to this document for running and maintaining motors in wet environments. SPECIFICATIONS: Application: Car Motor Type: Brushless kV Value: 1650 kV Motor diameter: 41,6 mm Motor length: 88,8 mm Shaft Diameter: 5,0 mm Max Rev.: 60000 rpm Connector: 6,5mm Bullet Max voltage: 33.6 V

5.795,-

6.195,-

KJØP
-6%
Hovedbilde Castle Creation COPPERHEAD 10, WP SENSORED ESC + ... Hovedbilde Castle Creation COPPERHEAD 10, WP SENSORED ESC + ...
Castle Creation COPPERHEAD 10, WP SENSORED ESC + ...
Art.nr: 010-0166-01
Copied
Castle COPPERHEAD 10, WP SENSORED ESC + 1406-4600KV Sensored Basher Edition Combo COPPERHEAD 10 FEATURES: Input Voltage Range : 2s-4s LiPo (ESC Only) SMARTSENSE™, SENSORED ONLY and BRUSHED Running Modes Selectable 5.5V or 7.5V (6A peak) internal BEC (Battery Eliminator Circuit) CRYO-DRIVE™ Technology minimizes the amount of time the ESC’s electrical components spend generating heat, resulting in improved thermal performance during partial throttle operation where the majority of driving occurs. ESC is housed in a durable injection molded case and potted in WATERPROOF epoxy to protect the electronics and promote efficient heat transfer. 30mm removable fan and DUAL USE FAN GUARD Compatible with S.BUS2 Telemetry Link and Futaba T4PX, T7PX and T7PXR transmitters AUDIBLE ALERTS for easy diagnosis of common issues such as motor-over-temperature and low-voltage cutoff. Convenient TRANSMITTER PROGRAMMING for six common adjustable settings inlcuding cutoff voltage and drag brake. DATA LOGGING LITE* captures and records performance data from your vehicle to maximize performance and battery life. (Battery Voltage Battery Ripple, Controller temp, Motor RPM, Motor Temp) SMARTSENSE™ uses the motor’s sensors at startup to provide cog-free starts, excellent torque and low-speed drivability. Once the motor is turning, the ESC seamlessly transitions to Castle’s ultra-efficient sensorless mode. CASTLE LINK USB programming kit (coupon included with purchase) Optional smartphone-based programming with the B-LINK™ BLUETOOTH ADAPTER (sold separately) and Castle Link App available on Google Play or Apple App Store THERE'S A NEW PREDATOR IN TOWN. Meet the COPPERHEAD 10 PERFORMANCE ESC. It takes to the open road as well as it takes to no road at all. This completely new design rounds out our 1:10 scale offerings, positioned between the SIDEWINDER 4 as the entry-level upgrade and the MAMBA X as the extreme performance option. The COPPERHEAD 10 includes CRYO-DRIVE™ TECHNOLOGY, SENSORED MOTOR SUPPORT and DATA LOGGING LITE* with Castle’s signature reliability and performance. Throughout its development the Copperhead has been put to the test in all types of elements and performed as aggressively, or as stealthy, as desired. Whether on the trail dominating the gates or throwing dust on the dirt track, the Copperhead is power hungry when you need it and oozes smooth low-end power for technical low RPM performance. If your rig is outfitted with high-power servos (or additional torque increasing modifications) there is no need to worry about brown-outs, glitching or slow actuating servos. The Copperhead provides clean and constant power with its user selectable (through Castle Link) 5.5V or 7.5V (6A peak) internal BEC. The ESC can be installed and calibrated (plug and play) and provide immediate fuss-free wheel time. Through the interface-free manual programming mode, using your transmitter you can set your low-voltage cutoff, brake/reverse type, brake amount, drag brake, motor type and direction. Likewise, you can employ the use of the Castle Link Programming Suite on your Windows™ PC (coupon for free USB adapter included with purchase), or wirelessly with the convenience of the new B-Link™ Bluetooth™ Adapter and Castle Link app for Android or iOS. Additional Castle Link benefits include access to all firmware updates and added features sets released from Castle Engineering (at no charge), the ability to download and analyze your collected Data Log , an Intuitive Demo Mode capability as well as the option to save setup profiles (for multiple vehicles) for later use. For crawler setups or others that do not require an ESC cooling fan, the fan is easily removed with four screws and the fan guard with the cool COPPERHEAD logo simply clicks back into place on the top of the ESC. It keeps the COPPERHEAD 10 looking mean and provides an extra measure of protection. To further protect your investment, the COPPERHEAD emits audible alerts for easy diagnosis of common issues such as motor-over-temperature and low-voltage cutoff. You'll find a handy decal in your box that contains a reference chart for the eight alert tones, no need to Google while your enjoying your wheel time! We’ve packaged the COPPERHEAD 10 with a dozen different 4-POLE 12-SLOT sensored motor options to eliminate the guesswork in finding the right brushless power upgrade for your basher, crawler, on road vehicle, short course or monster truck. An added bonus of pairing your Copperhead with a Castle 4-Pole 12-Slot sensored motor is enabling SMARTSENSE™ TECHNOLOGY, which uses the motor’s sensors at startup to provide cog-free starts, excellent torque and low-speed drivability. Once the motor is turning, the ESC seamlessly transitions to Castle’s ultra-efficient sensorless mode with electronic timing to advance timing automatically for peak performance in all driving conditions. The all-new COPPERHEAD 10 PERFORMANCE 1/10 SCALE ESC is ideal for those who want sensored motor support, data logging, a 6A peak selectable internal BEC (5.5V or 7.5V) and Castle’s signature reliability and performance in the meanest looking ESC around! If you’re looking to transform your 1:10 scale stock vehicle from dull to dangerously fun COPPERHEAD can do it with its buttery smooth starts, CRYO-DRIVE enabled performance and up to 4S power in a compact, easy-to-install footprint. Waterproof : Yes Telemetry Capable : Yes Data Logging : Yes Auxiliary Wire : No Minimum Input Voltage : 2S Maximum Input Voltage : 4S Sensored Capable : Yes Recon G6 Certified ESC : No ROAR Certified ESC : No CRYO-DRIVE : Yes COPPERHEAD 10 ESC COMES WITH: Copperhead 10 ESC with sensor harness Copperhead decals and Audible Alert Reference Chart Coupon for free Castle Link USB Copperhead Quick Start Guide Sensor port dust cover Copperhead 10 ESC Specs: Input Voltage Range for 1406-4600Kv Combo : 2s-3s LiPo Running Modes: SMARTSENSE™, Sensored Only and Brushed Motor Operation Brake: Proportional Reversible: Yes, but may be disabled for racing On/Off Switch: Yes, waterproof Cooling Fan: Yes, factory equipped (30mm), fully removable** and includes dual use fan guard (See Operating Use Statements) Size: 55.6 x 35.3 x 33.8mm Weight (with wires): 70.9 g Motor Connectors: 4.0mm female bullets for motor connection Items Needed for Operation: Battery Connector required, Castle 4.0mm Polarized Connectors, Traxxas® Power Connectors, or T-Plugs or XT60 connectors are recommended Operating environment: Waterproof design for all weather conditions. Although COPPERHEAD 10 is waterproof, it is not intended for operation while completely submerged in liquid. Always rinse the ESC and motor with clean water after exposure to corrosives or dirt. While the motor and controller may be waterproof, we suggest users confirm that the rest of their vehicle, including the batteries, servos, radio and chassis are also waterproof before exposing them to liquids of any kind. **The cooling fan must be removed prior to driving in wet conditions. It is not waterproof. Programmability: Fully programmable Castle feature set using Castle Link USB adapter (coupon for free link included in package) and freely downloadable Castle Link Windows software, or the Castle Link App and a B-LINK Bluetooth Adapter (sold separately). Telemetry Link Capable: Yes, with Castle Creations Telemetry Link for S.BUS2 and Futaba T4PX, T7PX and T7PXR Transmitters. 1406-4600KV Motor Specs: Application Guidelines: 2s-3s on 2WD buggies, stadium trucks and touring cars. 2s on 2WD SCTs Max. Recommended Vehicle Weight: Up to 2.26kg ready-to-run Kv: 4600 Max. RPM: 100,000 Motor Size: Length: 49.5mm Diameter: 36mm Shaft Size: Length: 15mm Shaft Diameter: 1/8" (3.17mm) Weight (w/wires): 197 g Mounting Hole Specifications: M3 @ 25mm Cooling Fan: Optional - Coming Soon Connectors: 4mm male Castle Bullet Connectors Tech Notes: Running modes: Sensorless and Sensored Water Resistant Design: The sensor board is coated with silicone conformal coating to protect the sensors from moisture. The sensor connections are not water resistant; water can cause signal loss which could result in loss of sensored capabilities. Castle recommended applying dielectric grease to the outside of the sensor wire connections after installation of the wire. Routine maintenance is recommended after running in wet conditions.

3.495,-

3.695,-

KJØP
-5%
Hovedbilde Castle Creation COPPERHEAD 10, WP ESC + 1406-3800KV ... Hovedbilde Castle Creation COPPERHEAD 10, WP ESC + 1406-3800KV ...
Castle Creation COPPERHEAD 10, WP ESC + 1406-3800KV ...
Art.nr: 010-0166-08
Copied
Castle COPPERHEAD 10, WP ESC + 1406-3800KV Crawler Edition Sensor Motor Combo COPPERHEAD 10 FEATURES: Input Voltage Range : 2s-4s LiPo (ESC Only) SMARTSENSE™, SENSORED ONLY and BRUSHED Running Modes Selectable 5.5V or 7.5V (6A peak) internal BEC (Battery Eliminator Circuit) CRYO-DRIVE™ Technology minimizes the amount of time the ESC’s electrical components spend generating heat, resulting in improved thermal performance during partial throttle operation where the majority of driving occurs. ESC is housed in a durable injection molded case and potted in WATERPROOF epoxy to protect the electronics and promote efficient heat transfer. 30mm removable fan and DUAL USE FAN GUARD Compatible with S.BUS2 Telemetry Link and Futaba T4PX, T7PX and T7PXR transmitters AUDIBLE ALERTS for easy diagnosis of common issues such as motor-over-temperature and low-voltage cutoff. Convenient TRANSMITTER PROGRAMMING for six common adjustable settings inlcuding cutoff voltage and drag brake. DATA LOGGING LITE* captures and records performance data from your vehicle to maximize performance and battery life. (Battery Voltage Battery Ripple, Controller temp, Motor RPM, Motor Temp) SMARTSENSE™ uses the motor’s sensors at startup to provide cog-free starts, excellent torque and low-speed drivability. Once the motor is turning, the ESC seamlessly transitions to Castle’s ultra-efficient sensorless mode. CASTLE LINK USB programming kit (coupon included with purchase) Optional smartphone-based programming with the B-LINK™ BLUETOOTH ADAPTER (sold separately) and Castle Link App available on Google Play or Apple App Store THERE'S A NEW PREDATOR IN TOWN. Meet the COPPERHEAD 10 PERFORMANCE ESC. It takes to the open road as well as it takes to no road at all. This completely new design rounds out our 1:10 scale offerings, positioned between the SIDEWINDER 4 as the entry-level upgrade and the MAMBA X as the extreme performance option. The COPPERHEAD 10 includes CRYO-DRIVE™ TECHNOLOGY, SENSORED MOTOR SUPPORT and DATA LOGGING LITE* with Castle’s signature reliability and performance. Throughout its development the Copperhead has been put to the test in all types of elements and performed as aggressively, or as stealthy, as desired. Whether on the trail dominating the gates or throwing dust on the dirt track, the Copperhead is power hungry when you need it and oozes smooth low-end power for technical low RPM performance. If your rig is outfitted with high-power servos (or additional torque increasing modifications) there is no need to worry about brown-outs, glitching or slow actuating servos. The Copperhead provides clean and constant power with its user selectable (through Castle Link) 5.5V or 7.5V (6A peak) internal BEC. The ESC can be installed and calibrated (plug and play) and provide immediate fuss-free wheel time. Through the interface-free manual programming mode, using your transmitter you can set your low-voltage cutoff, brake/reverse type, brake amount, drag brake, motor type and direction. Likewise, you can employ the use of the Castle Link Programming Suite on your Windows™ PC (coupon for free USB adapter included with purchase), or wirelessly with the convenience of the new B-Link™ Bluetooth™ Adapter and Castle Link app for Android or iOS. Additional Castle Link benefits include access to all firmware updates and added features sets released from Castle Engineering (at no charge), the ability to download and analyze your collected Data Log , an Intuitive Demo Mode capability as well as the option to save setup profiles (for multiple vehicles) for later use. For crawler setups or others that do not require an ESC cooling fan, the fan is easily removed with four screws and the fan guard with the cool COPPERHEAD logo simply clicks back into place on the top of the ESC. It keeps the COPPERHEAD 10 looking mean and provides an extra measure of protection. To further protect your investment, the COPPERHEAD emits audible alerts for easy diagnosis of common issues such as motor-over-temperature and low-voltage cutoff. You'll find a handy decal in your box that contains a reference chart for the eight alert tones, no need to Google while your enjoying your wheel time! We’ve packaged the COPPERHEAD 10 with a dozen different 4-POLE 12-SLOT sensored motor options to eliminate the guesswork in finding the right brushless power upgrade for your basher, crawler, on road vehicle, short course or monster truck. An added bonus of pairing your Copperhead with a Castle 4-Pole 12-Slot sensored motor is enabling SMARTSENSE™ TECHNOLOGY, which uses the motor’s sensors at startup to provide cog-free starts, excellent torque and low-speed drivability. Once the motor is turning, the ESC seamlessly transitions to Castle’s ultra-efficient sensorless mode with electronic timing to advance timing automatically for peak performance in all driving conditions. The all-new COPPERHEAD 10 PERFORMANCE 1/10 SCALE ESC is ideal for those who want sensored motor support, data logging, a 6A peak selectable internal BEC (5.5V or 7.5V) and Castle’s signature reliability and performance in the meanest looking ESC around! If you’re looking to transform your 1:10 scale stock vehicle from dull to dangerously fun COPPERHEAD can do it with its buttery smooth starts, CRYO-DRIVE enabled performance and up to 4S power in a compact, easy-to-install footprint. Waterproof : Yes Telemetry Capable : Yes Data Logging : Yes Auxiliary Wire : No Minimum Input Voltage : 2S Maximum Input Voltage : 3S Sensored Capable : Yes Recon G6 Certified ESC : No ROAR Certified ESC : No CRYO-DRIVE : Yes COPPERHEAD 10 ESC COMES WITH: Copperhead 10 ESC with sensor harness Copperhead decals and Audible Alert Reference Chart Coupon for free Castle Link USB Copperhead Quick Start Guide Sensor port dust cover Copperhead 10 ESC Specs: Input Voltage Range for 1406-3800Kv Crawler Combo: 2-3s LiPo Running Modes: SMARTSENSE™, Sensored Only and Brushed Motor Operation Brake: Proportional Reversible: Yes, but may be disabled for racing On/Off Switch: Yes, waterproof Cooling Fan: Yes, factory equipped (30mm), fully removable** and includes dual use fan guard (See Operating Use Statements) Size: 55.6 x 35.3 x 33.8mm Weight (with wires): 70.9 g Motor Connectors: 4.0mm female bullets for motor connection Items Needed for Operation: Battery Connector required, Castle 4.0mm Polarized Connectors, Traxxas® Power Connectors, or T-Plugs or XT60 connectors are recommended Operating environment: Waterproof design for all weather conditions. Although COPPERHEAD 10 is waterproof, it is not intended for operation while completely submerged in liquid. Always rinse the ESC and motor with clean water after exposure to corrosives or dirt. While the motor and controller may be waterproof, we suggest users confirm that the rest of their vehicle, including the batteries, servos, radio and chassis are also waterproof before exposing them to liquids of any kind. **The cooling fan must be removed prior to driving in wet conditions. It is not waterproof. Programmability: Fully programmable Castle feature set using Castle Link USB adapter (coupon for free link included in package) and freely downloadable Castle Link Windows software, or the Castle Link App and a B-LINK Bluetooth Adapter (sold separately). Telemetry Link Capable: Yes, with Castle Creations Telemetry Link for S.BUS2 and Futaba T4PX, T7PX and T7PXR Transmitters. 1406-3800KV Motor Specs: Application Guidelines: Rock crawlers, trail rigs, touring cars, stadium trucks and buggies on 2s-3s Max. Recommended Crawler Vehicle Weight: Up to 4.08kg ready-to-run Kv: 2850 Max. RPM: 100,000 Motor Size: Length: 49.5mm Diameter: 36mm Shaft Size: Length: 15mm Shaft Diameter: 1/8" (3.17mm) Weight (w/wires): 197 g Mounting Hole Specifications: M3 @ 25mm Cooling Fan: Optional - Coming Soon Connectors: 4mm male Castle Bullet Connectors Water Resistant Design: The sensor board is coated with silicone conformal coating to protect the sensors from moisture. The sensor connections are not water resistant; water can cause signal loss which could result in loss of sensored capabilities. Castle recommended applying dielectric grease to the outside of the sensor wire connections after installation of the wire.

3.495,-

3.695,-

KJØP
-5%
Hovedbilde Castle Creation COPPERHEAD 10, WP ESC + 1410-3800KV ... Hovedbilde Castle Creation COPPERHEAD 10, WP ESC + 1410-3800KV ...
Castle Creation COPPERHEAD 10, WP ESC + 1410-3800KV ...
Art.nr: 010-0166-11
Copied
Castle COPPERHEAD 10, WP ESC + 1410-3800KV 5mm Short Course Edition Sensor Motor Combo COPPERHEAD 10 FEATURES: Input Voltage Range : 2s-4s LiPo (ESC Only) SMARTSENSE™, SENSORED ONLY and BRUSHED Running Modes Selectable 5.5V or 7.5V (6A peak) internal BEC (Battery Eliminator Circuit) CRYO-DRIVE™ Technology minimizes the amount of time the ESC’s electrical components spend generating heat, resulting in improved thermal performance during partial throttle operation where the majority of driving occurs. ESC is housed in a durable injection molded case and potted in WATERPROOF epoxy to protect the electronics and promote efficient heat transfer. 30mm removable fan and DUAL USE FAN GUARD Compatible with S.BUS2 Telemetry Link and Futaba T4PX, T7PX and T7PXR transmitters AUDIBLE ALERTS for easy diagnosis of common issues such as motor-over-temperature and low-voltage cutoff. Convenient TRANSMITTER PROGRAMMING for six common adjustable settings inlcuding cutoff voltage and drag brake. DATA LOGGING LITE* captures and records performance data from your vehicle to maximize performance and battery life. (Battery Voltage Battery Ripple, Controller temp, Motor RPM, Motor Temp) SMARTSENSE™ uses the motor’s sensors at startup to provide cog-free starts, excellent torque and low-speed drivability. Once the motor is turning, the ESC seamlessly transitions to Castle’s ultra-efficient sensorless mode. CASTLE LINK USB programming kit (coupon included with purchase) Optional smartphone-based programming with the B-LINK™ BLUETOOTH ADAPTER (sold separately) and Castle Link App available on Google Play or Apple App Store THERE'S A NEW PREDATOR IN TOWN. Meet the COPPERHEAD 10 PERFORMANCE ESC. It takes to the open road as well as it takes to no road at all. This completely new design rounds out our 1:10 scale offerings, positioned between the SIDEWINDER 4 as the entry-level upgrade and the MAMBA X as the extreme performance option. The COPPERHEAD 10 includes CRYO-DRIVE™ TECHNOLOGY, SENSORED MOTOR SUPPORT and DATA LOGGING LITE* with Castle’s signature reliability and performance. Throughout its development the Copperhead has been put to the test in all types of elements and performed as aggressively, or as stealthy, as desired. Whether on the trail dominating the gates or throwing dust on the dirt track, the Copperhead is power hungry when you need it and oozes smooth low-end power for technical low RPM performance. If your rig is outfitted with high-power servos (or additional torque increasing modifications) there is no need to worry about brown-outs, glitching or slow actuating servos. The Copperhead provides clean and constant power with its user selectable (through Castle Link) 5.5V or 7.5V (6A peak) internal BEC. The ESC can be installed and calibrated (plug and play) and provide immediate fuss-free wheel time. Through the interface-free manual programming mode, using your transmitter you can set your low-voltage cutoff, brake/reverse type, brake amount, drag brake, motor type and direction. Likewise, you can employ the use of the Castle Link Programming Suite on your Windows™ PC (coupon for free USB adapter included with purchase), or wirelessly with the convenience of the new B-Link™ Bluetooth™ Adapter and Castle Link app for Android or iOS. Additional Castle Link benefits include access to all firmware updates and added features sets released from Castle Engineering (at no charge), the ability to download and analyze your collected Data Log , an Intuitive Demo Mode capability as well as the option to save setup profiles (for multiple vehicles) for later use. For crawler setups or others that do not require an ESC cooling fan, the fan is easily removed with four screws and the fan guard with the cool COPPERHEAD logo simply clicks back into place on the top of the ESC. It keeps the COPPERHEAD 10 looking mean and provides an extra measure of protection. To further protect your investment, the COPPERHEAD emits audible alerts for easy diagnosis of common issues such as motor-over-temperature and low-voltage cutoff. You'll find a handy decal in your box that contains a reference chart for the eight alert tones, no need to Google while your enjoying your wheel time! We’ve packaged the COPPERHEAD 10 with a dozen different 4-POLE 12-SLOT sensored motor options to eliminate the guesswork in finding the right brushless power upgrade for your basher, crawler, on road vehicle, short course or monster truck. An added bonus of pairing your Copperhead with a Castle 4-Pole 12-Slot sensored motor is enabling SMARTSENSE™ TECHNOLOGY, which uses the motor’s sensors at startup to provide cog-free starts, excellent torque and low-speed drivability. Once the motor is turning, the ESC seamlessly transitions to Castle’s ultra-efficient sensorless mode with electronic timing to advance timing automatically for peak performance in all driving conditions. The all-new COPPERHEAD 10 PERFORMANCE 1/10 SCALE ESC is ideal for those who want sensored motor support, data logging, a 6A peak selectable internal BEC (5.5V or 7.5V) and Castle’s signature reliability and performance in the meanest looking ESC around! If you’re looking to transform your 1:10 scale stock vehicle from dull to dangerously fun COPPERHEAD can do it with its buttery smooth starts, CRYO-DRIVE enabled performance and up to 4S power in a compact, easy-to-install footprint. Waterproof : Yes Telemetry Capable : Yes Data Logging : Yes Auxiliary Wire : No Minimum Input Voltage : 2S Maximum Input Voltage : 3S Sensored Capable : Yes Recon G6 Certified ESC : No ROAR Certified ESC : No CRYO-DRIVE : Yes COPPERHEAD 10 ESC COMES WITH: Copperhead 10 ESC with sensor harness Copperhead decals and Audible Alert Reference Chart Coupon for free Castle Link USB Copperhead Quick Start Guide Sensor port dust cover Copperhead 10 ESC Specs: Input Voltage Range for 1410-3800Kv SCT Combo: 2-3s LiPo Running Modes: SMARTSENSE™, Sensored Only and Brushed Motor Operation Brake: Proportional Reversible: Yes, but may be disabled for racing On/Off Switch: Yes, waterproof Cooling Fan: Yes, factory equipped (30mm), fully removable** and includes dual use fan guard (See Operating Use Statements) Size: 55.6 x 35.3 x 33.8mm Weight (with wires): 70.9 g Motor Connectors: 4.0mm female bullets for motor connection Items Needed for Operation: Battery Connector required, Castle 4.0mm Polarized Connectors, Traxxas® Power Connectors, or T-Plugs or XT60 connectors are recommended Operating environment: Waterproof design for all weather conditions. Although COPPERHEAD 10 is waterproof, it is not intended for operation while completely submerged in liquid. Always rinse the ESC and motor with clean water after exposure to corrosives or dirt. While the motor and controller may be waterproof, we suggest users confirm that the rest of their vehicle, including the batteries, servos, radio and chassis are also waterproof before exposing them to liquids of any kind. **The cooling fan must be removed prior to driving in wet conditions. It is not waterproof. Programmability: Fully programmable Castle feature set using Castle Link USB adapter (coupon for free link included in package) and freely downloadable Castle Link Windows software, or the Castle Link App and a B-LINK Bluetooth Adapter (sold separately). Telemetry Link Capable: Yes, with Castle Creations Telemetry Link for S.BUS2 and Futaba T4PX, T7PX and T7PXR Transmitters. 1410-3800KV Motor Specs: Application Guidelines: 2s-3s on 2WD/4WD SC trucks and monster trucks. 3S only with conservative gearing Max. Recommended SCT Weight: Vehicles weighing up to 2.95 kg ready-to-run. Kv: 3800 Max. RPM: 100,000 Motor Size: Length: 52.7mm Diameter: 36mm Shaft Size: Length: 15mm Shaft Diameter: 5mm Weight (w/wires): 237 g Mounting Hole Specifications: M3 @ 25mm Cooling Fan: Optional - Coming Soon Connectors: 4mm male Castle Bullet Connectors Water Resistant Design: The sensor board is coated with silicone conformal coating to protect the sensors from moisture. The sensor connections are not water resistant; water can cause signal loss which could result in loss of sensored capabilities. Castle recommended applying dielectric grease to the outside of the sensor wire connections after installation of the wire.

3.495,-

3.695,-

KJØP
-5%
Hovedbilde Castle Creation Mamba XLX2 8S 33,6V ESC, 2028-1100KV ...
Castle Creation Mamba XLX2 8S 33,6V ESC, 2028-1100KV ...
Art.nr: 010-0167-02
Copied
Castle Mamba XLX2, 8S, 33.6V ESC with 2028-1100KV Sensored Motor Combo Introducing the Mamba XLX2, an ESC that will redefine the limits of 1/5th scale R/C! Engineered from the ground up, the Mamba XLX2 is packed with a potent combination of hardware and software advancements, sensored performance, CRYO-DRIVE™ and waterproof design that will set a new standard for high performance power systems. The Mamba XL family is well known for its extreme performance capabilities. The XLX2 pays homage to the legacy of its predecessors and exceeds their performance on all levels. The Mamba XLX2 and 2028-1100kv combo is designed for the most extreme and demanding RC applications. The massive motor and high power ESC are capable of pushing vehicles and drivers to their limits and beyond. This is the perfect combo for vehicles weighing up to 30 lbs and up to 8s LiPo. MAMBA XLX2 FEATURES: Input Voltage Range 3S-8S LiPo (33.6v max) Sensorless, Sensored, SmartSense™ and Brushed Running Modes Powerful Integrated 20A Peak Adjustable BEC (5.25V-8.0V) CRYO-DRIVE™ Technology minimizes the amount of time the ESC’s electrical components spend generating heat, resulting in improved thermal performance during partial throttle operation where the majority of driving occurs ESC is housed in a rugged CNC aluminum case and potted in waterproof epoxy to protect the electronics and promote efficient heat transfer Premium forged heatsink with elliptical fins for superior air flow and increased heat dissipation Oversized factory equipped thermally controlled 50MM cooling fan Compatible with S.BUS2 Telemetry Link and Futaba T4PX, T7PX and T7PXR transmitters Mounting holes located in bottom of aluminum case for affixing to your vehicle Waterproof design for all weather conditions Data logging capability to capture and record performance data from your vehicle Auxiliary wire functionality for "on-the-fly" adjustments using your transmitter Audible alerts for easy diagnosis of common issues such as motor-over-temperature and low-voltage cutoff Convenient transmitter programming for six common adjustable settings including cutoff voltage and drag brake Easily tune and update ESC with USB and Bluetooth™ programming options Castle Link USB programming kit (coupon included with purchase) Optional smartphone-based programming with the B-LINK™ Bluetooth Adapter (sold separately and Castle Link all available on Google Play or Apple App Store) MOTOR FEATURES: 4-POLE 12-SLOT sensored design that boasts exceptional efficiency and produces less heat Proprietary stator winding produces low internal resistance for a cooler running motor Dual sensor ports to ensure optimal installation in your large-scale vehicle Oversized NMB bearings and vibration dampening system ensure the longest possible bearing life High-strength, high-temperature grade neodymium sintered magnets combined with high-strength Kevlar wrap ensures the integrity of the rotor is not compromised during harsh running conditions and high RPMs Specification: Application: Car Motor Type: Brushless kV Value: 1100 kV Motor diameter: 57 mm Motor length: 113,2 mm Shaft length: 30 mm Shaft Diameter: 8 mm Weight: 1250 gram Max Rev.: 45000 rpm Connector: 8mm Bullet Max voltage: 33.6 V

6.395,-

7.995,-

KJØP
-20%
Hovedbilde Castle Creations Sidewinder Micro 2 1/18 Combo with ... Hovedbilde Castle Creations Sidewinder Micro 2 1/18 Combo with ...
Castle Creations Sidewinder Micro 2 1/18 Combo with ...
Art.nr: 010-0150-01
Copied
Castle Sidewinder Micro 2 Sport 1/18 Scale ESC + 0808-4100KV Motor Combo Awesome, Affordable Micro Performance! Sidewinder Micro 2 is our entry level 1/18 scale controller capable of 2S - 3S LiPo, with a 2 amp peak BEC, and is perfect for 1/18 scale 2WD vehicles and smaller 4WD (up to 900g) such as the Team Associated RC18B2 or Dromida SC4. Whether you are converting to a brushless setup or simply want more power than your current brushless power system is putting out, Sidewinder Micro 2 is the perfect controller to fit your needs. Not intended for 1/16th scale or 1/14th scale vehicles (IE Losi Mini-8ight/T, Traxxas Mini E-Revo) Sidewinder Micro 2 features: Adjustable BEC functionality: 5.5V or 7.5V (default 5.5V) The ability to diagnose and resolve problems in the field are made easy as this ESC will communicate with audible tones when certain conditions are present. Alerts are present for start fail, voltage cutoff, radio glitch, over-temperature, over-current and excessive load detections. Updated circuitry and refined software makes for ultra-smooth starts. Link Live to communicate power system information to an external device. This feature, when enabled, will allow users to experience real-time telemetry data such as battery voltage, ESC temperature, motor power output and battery ripple. Compatibility with the Futaba S.BUS® T4PX transmitter (requires purchase of Castle Telemetry Link for S.BUS2). Manual programming settings include Brake/Reverse Type, Voltage Cutoff, Brake Amount, Drag Brake and Motor Type.   Waterproof : No Telemetry Capable : Yes Data Logging : No Auxiliary Wire : No Minimum Input Voltage : 2S Maximum Input Voltage : 3S Sensored Capable : No Recon G6 Certified ESC : No ROAR Certified ESC : No CRYO-DRIVE : No ESC Specs: Input Voltage Range: MIN: 2S LiPo / MAX: 3S LiPo / 4-9 cell NiMH BEC Specifications: 2A Peak BEC, Adjustable: 5.5V or 7.5V, default 5.5V Operating Environment: N/A Brake: Proportional Reversible: Yes, but can be disabled for racing On/Off Switch: Yes Cooling Fan: No Length: 38mm Width: 22mm Height: 12.7mm Weight (w/wires): 26g Connectors: 3.5mm bullet connectors on the motor wires Items Needed for Operation: Battery connectors Product Use Statements: Not intended for use in wet conditions, the ESC is not waterproof Application Guidelines: 1/18th scale RC hobby vehicles weighing up to 0.9kg Programmability: Fully programmable Castle feature set using Castle Link USB adapter (sold separately) and freely downloadable Castle Link Windows software. Telemetry Link Capable: Yes Tech Notes: The Sidewinder Micro 2 has 3.5mm bullet connectors on the motor wires and the battery input wires are bare. You must add the connector of your choice to the battery leads. We recommend a high current connector rated for at least 40 amps. Motor Specs: Input Voltage Range: 2-3S LiPo, 4-9 cell NiMH Kv: 4100 Max. RPM: N/A Length: 38.1mm Diameter: 20mm Shaft Diameter: 2mm Shaft Length: 12mm Weight: 50g Mounting Hole Specifications: 2.5mm holes @ 1/2”, 14MM, 5/8” Cooling Fan: No Connectors: 3.5mm male bullets Items Needed for Operation: N/A Product Use Statements: N/A Application Guidelines: Intended for 2WD and lighter 4WD vehicles (<0.9kg) Max. Recommended Vehicle Weight: 900g Tech Notes: Monitor motor temperatures closely; overheating a motor will cause permanent damage to the magnets. Never exceed 82°C on the the motor or ESC.

1.695,-

1.795,-

KJØP
-6%
Hovedbilde Castle Creation Mamba Micro X2 Combo med 0808-8200KV ...
Castle Creation Mamba Micro X2 Combo med 0808-8200KV ...
Art.nr: 010-0169-03
Copied
Castle Mamba Micro X2, 16.8V, WP Sensored ESC W / 0808-8200KV MOTOR The Mamba Micro X2 is a refresh of our popular 1/18 scale Mamba Micro X. This new ESC increases the maximum input voltage to 4s. We also added DATA LOGGING and our CRYO-DRIVE™ TECHNOLOGY; CryoDrive allows the ESC to run cooler and more efficiently at partial throttle. Like its predecessor, it boasts an 2 amp peak BEC,waterproof* and has SENSORED MOTOR SUPPORT (included 0808 motor is sensorless). This is the perfect upgrade for 1/18 scale RC vehicles, up to 2S LiPo and weighing in at up to 0.68kg. The Mamba Micro X also works well in some 1/10th scale crawlers for low speed operation (no rock racing/hill climbing). You can now purchase the Mamba Micro X2 Crawler Edition ESC paired with our Slate Crawler motors. ESC FEATURES: Input Voltage range 2S (with included 0808-8200Kv motor) Adjustable BEC: 5.5V or 7.5V (2A Peak), default 5.5V Waterproof design Convenient transmitter programming for six common adjustable settings Additional settings and software updates available via Windows®-based Castle Link software and USB adapter or the Castle Link App for Android or iOS and a B-LINK Bluetooth Adapter (sold separately) Telemetry Ready (Compatible with S.BUS2 Telemetry Link and Futaba T4PX, T7PX and T7PXR transmitters) Auxiliary Wire Functionality allows for “on-the-fly” adjustments such as Max Power and Max Brake. Audible Alerts that will notify you of possible issues with calibrations and error conditions Designed and manufactured in Olathe, Kansas, USA Mamba Micro X2 w/0808-8200Kv Motor Combo Includes: Mamba Micro X2 ESC 0808-8200Kv Brushless Sensorless Motor Quick Start Guide Castle Decals Application Guidelines: 1/18 scale RC hobby vehicles weighing up to 0.68kg with included 0808-8200KV motor. Max. Recommended Vehicle Weight: 680g, with batteries, ready-to-run *Not intended for operation while submerged in liquid. If unit is operated in wet conditions, rinse with fresh water to remove dirt or corrosives, then fully dry unit.

2.195,-

2.295,-

KJØP
-4%
Hovedbilde CASTLE CREATION COPPERHEAD 10 SENSORED ESC SCT EDITION ... Hovedbilde CASTLE CREATION COPPERHEAD 10 SENSORED ESC SCT EDITION ...
CASTLE CREATION COPPERHEAD 10 SENSORED ESC SCT EDITION ...
Art.nr: 010-0166-13
Copied
CASTLE CREATION COPPERHEAD 10 SENSORED ESC SCT EDITION W / 1412-3200KV 5MM SENSORED MOTOR Meet the COPPERHEAD 10 PERFORMANCE ESC. It takes to the open road as well as it takes to no road at all.  This completely new design rounds out our 1:10 scale offerings, positioned between the SIDEWINDER 4 as the entry-level upgrade and the MAMBA X as the extreme performance option. The COPPERHEAD 10 includes CRYO-DRIVE™ TECHNOLOGY, SENSORED MOTOR SUPPORT and DATA LOGGING LITE* with Castle’s signature reliability and performance.  Throughout its development the Copperhead has been put to the test in all types of elements and performed as aggressively, or as stealthy, as desired. Whether on the trail dominating the gates or throwing dust on the dirt track, the Copperhead is power hungry when you need it and oozes smooth low-end power for technical low RPM performance. If your rig is outfitted with high-power servos (or additional torque increasing modifications) there is no need to worry about brown-outs, glitching or slow actuating servos. The Copperhead provides clean and constant power with its user selectable (through Castle Link) 5.5V or 7.5V (6A peak) internal BEC.  The ESC can be installed and calibrated (plug and play) and provide immediate fuss-free wheel time. Through the interface-free manual programming mode, using your transmitter you can set your low-voltage cutoff, brake/reverse type, brake amount, drag brake, motor type and direction. Likewise, you can employ the use of the Castle Link Programming Suite on your Windows™ PC (coupon for free USB adapter included with purchase), or wirelessly with the convenience of the new B-Link™ Bluetooth™ Adapter and Castle Link app for Android or iOS.  Additional Castle Link benefits include access to all firmware updates and added features sets released from Castle Engineering (at no charge), the ability to download and analyze your collected Data Log , an Intuitive Demo Mode capability as well as the option to save setup profiles (for multiple vehicles) for later use. For crawler setups or others that do not require an ESC cooling fan, the fan is easily removed with four screws and the fan guard with the cool COPPERHEAD logo simply clicks back into place on the top of the ESC. It keeps the COPPERHEAD 10 looking mean and provides an extra measure of protection.  To further protect your investment, the COPPERHEAD emits audible alerts for easy diagnosis of common issues such as motor-over-temperature and low-voltage cutoff. You'll find a handy decal in your box that contains a reference chart for the eight alert tones, no need to Google while your enjoying your wheel time! We’ve packaged the COPPERHEAD 10 with a dozen different 4-POLE 12-SLOT sensored motor options to eliminate the guesswork in finding the right brushless power upgrade for your basher, crawler, on road vehicle, short course or monster truck. An added bonus of pairing your Copperhead with a Castle 4-Pole 12-Slot sensored motor is enabling SMARTSENSE™ TECHNOLOGY, which uses the motor’s sensors at startup to provide cog-free starts, excellent torque and low-speed drivability. Once the motor is turning, the ESC seamlessly transitions to Castle’s ultra-efficient sensorless mode with electronic timing to advance timing automatically for peak performance in all driving conditions.    The all-new COPPERHEAD 10 PERFORMANCE 1:10 SCALE ESC is ideal for those who want sensored motor support, data logging, a 6A peak selectable internal BEC (5.5V or 7.5V) and Castle’s signature reliability and performance in the meanest looking ESC around! If you’re looking to transform your 1:10 scale stock vehicle from dull to dangerously fun COPPERHEAD can do it with its buttery smooth starts, CRYO-DRIVE enabled performance and up to 4S power in a compact, easy-to-install footprint.  COPPERHEAD 10 FEATURES: Input Voltage Range for 1412-3200Kv 5mm Combo : 2s-4s LiPo  SMARTSENSE™, SENSORED ONLY and BRUSHED Running Modes Selectable 5.5V or 7.5V (6A peak) internal BEC (Battery Eliminator Circuit) CRYO-DRIVE™ Technology minimizes the amount of time the ESC’s electrical components spend generating heat, resulting in improved thermal performance during partial throttle operation where the majority of driving occurs. ESC is housed in a durable injection molded case and potted in WATERPROOF epoxy to protect the electronics and promote efficient heat transfer.  30mm removable fan and DUAL USE FAN GUARD Compatible with S.BUS2 Telemetry Link and Futaba T4PX, T7PX and T7PXR transmitters AUDIBLE ALERTS for easy diagnosis of common issues such as motor-over-temperature and low-voltage cutoff. Convenient TRANSMITTER PROGRAMMING for six common adjustable settings inlcuding cutoff voltage and drag brake.  DATA LOGGING LITE* captures and records performance data from your vehicle to maximize performance and battery life. (Battery Voltage Battery Ripple, Controller temp, Motor RPM, Motor Temp) SMARTSENSE™ uses the motor’s sensors at startup to provide cog-free starts, excellent torque and low-speed drivability. Once the motor is turning, the ESC seamlessly transitions to Castle’s ultra-efficient sensorless mode. CASTLE LINK USB programming kit (coupon included with purchase)  Optional smartphone-based programming with the B-LINK™ BLUETOOTH ADAPTER (sold separately) and Castle Link App available on Google Play or Apple App Store COPPERHEAD 10 1412-3200KV 5MM COMBO COMES WITH: Copperhead 10 ESC with sensor harness 1412-3200KV 5mm Sensored Motor  Copperhead decals and Audible Alert Reference Chart Coupon for free Castle Link USB Copperhead Quick Start Guide Sensor port dust cover   ESC Specs Application Guidelines: 1:10 scale vehicles  Input Voltage Range: Min: 2s LiPo Max: 4s LiPo (16.8V) Running Modes: SMARTSENSE™, Sensored Only and Brushed Motor Operation Brake: Proportional Reversible: Yes, but may be disabled for racing. On/Off Switch: Yes, waterproof Cooling Fan: Yes, factory equipped (30mm), fully removable** and includes dual use fan guard  (See Operating Use Statements) Size: 2.19" x 1.39" x 1.33"  Weight (with wires): 70.9 g / 2.50 oz. Motor Connectors: 4.0mm female bullets for motor connection Items Needed for Operation: Battery Connector required, Castle 4.0mm Polarized Connectors, Traxxas® Power Connectors, or Deans® Ultra Plugs are recommended. Operating environment: Waterproof design for all weather conditions. Although COPPERHEAD 10 is waterproof, it is not intended for operation while completely submerged in liquid. Always rinse the ESC and motor with clean water after exposure to corrosives or dirt. While the motor and controller may be waterproof, we suggest users confirm that the rest of their vehicle, including the batteries, servos, radio and chassis are also waterproof before exposing them to liquids of any kind. **The cooling fan must be removed prior to driving in wet conditions. It is not waterproof. Programmability: Fully programmable Castle feature set using Castle Link USB adapter (coupon for free link included in package) and freely downloadable Castle Link Windows software, or the Castle Link App and a B-LINK Bluetooth Adapter (sold separately). Telemetry Link Capable: Yes, with Castle Creations Telemetry Link for S.BUS2 and Futaba T4PX, T7PX and T7PXR Transmitters. Tech Tips:     Motor Specs Input Voltage Range: 2s-4s Kv: 3200 Max. RPM: 75,000 Motor Size: Length: 62.5mm Diameter: 36mm Shaft Size: Length: 21mm Diameter: .197" (5mm) Weight (w/wires): 265.4g (9.4oz) Mounting Hole Specifications: M3 @ 25mm Cooling Fan: Optional - Coming Soon Connectors: 4mm male Castle Bullet Connectors Items Needed for Operation: Compatible Electronic Speed Control (ESC) Running Modes:  SmartSense™ (with Castle Sensor capable ESC), Sensored and an ultra-efficient Sensorless mode Application Guidelines: Ideal for 1:10 scale 2WD and 4WD SC Trucks up to 6.5lbs and up to 4s operation. Max. Recommended Vehicle Weight: Vehicles weighing up to 6.5 lbs. ready-to-run. Tech Notes: Water Resistant Design: The sensor board is coated with silicone conformal coating to protect the sensors from moisture. The sensor connections are not water resistant; water can cause signal loss which could result in loss of sensored capabilities. Castle recommended applying dielectric grease to the outside of the sensor wire connections after installation of the wire. Routine maintenance is recommended after running in wet conditions.

3.295,-

3.595,-

KJØP
-8%
Hovedbilde Castle Creations 010015003 Sidewinder Micro 2 1/18 ... Hovedbilde Castle Creations 010015003 Sidewinder Micro 2 1/18 ...
Castle Creations 010015003 Sidewinder Micro 2 1/18 ...
Art.nr: 010-0150-03
Copied
Castle Sidewinder Micro 2 Sport 1/18 ESC + 0808-8200KV Motor Combo Awesome, Affordable Micro Performance! Sidewinder Micro 2 is our entry level 1/18 scale controller capable of 2S - 3S LiPo, with a 2 amp peak BEC, and is perfect for 1/18 scale 2WD vehicles and smaller 4WD (up to 900g) such as the Team Associated RC18B2 or Dromida SC4. Whether you are converting to a brushless setup or simply want more power than your current brushless power system is putting out, Sidewinder Micro 2 is the perfect controller to fit your needs. Not intended for 1/16th scale or 1/14th scale vehicles (IE Losi Mini-8ight/T, Traxxas Mini E-Revo) Sidewinder Micro 2 features: Adjustable BEC functionality: 5.5V or 7.5V (default 5.5V) The ability to diagnose and resolve problems in the field are made easy as this ESC will communicate with audible tones when certain conditions are present. Alerts are present for start fail, voltage cutoff, radio glitch, over-temperature, over-current and excessive load detections. Updated circuitry and refined software makes for ultra-smooth starts. Link Live to communicate power system information to an external device. This feature, when enabled, will allow users to experience real-time telemetry data such as battery voltage, ESC temperature, motor power output and battery ripple. Compatibility with the Futaba S.BUS® T4PX transmitter (requires purchase of Castle Telemetry Link for S.BUS2). Manual programming settings include Brake/Reverse Type, Voltage Cutoff, Brake Amount, Drag Brake and Motor Type.   Waterproof: No Telemetry Capable: Yes Data Logging: No Auxiliary Wire: No Minimum Input Voltage: 2S Maximum Input Voltage: 2S Sensored Capable: No Recon G6 Certified ESC: No ROAR Certified ESC: No CRYO-DRIVE: No ESC Specs: Input Voltage Range: MIN: 2S LiPo / MAX: 3S LiPo / 4-9 cell NiMH (max 2S in this combo) BEC Specifications: 2A Peak BEC, Adjustable: 5.5V or 7.5V, default 5.5V Operating Environment: N/A Brake: Proportional Reversible: Yes, but can be disabled for racing On/Off Switch: Yes Cooling Fan: No Length: 38mm Width: 22mm Height: 12.7mm Weight (w/wires): 26g Connectors: 3.5mm bullet connectors on the motor wires Items Needed for Operation: Battery connectors Product Use Statements: Not intended for use in wet conditions, the ESC is not waterproof Application Guidelines: 1/18th scale RC hobby vehicles weighing up to 0.9kg Programmability: Fully programmable Castle feature set using Castle Link USB adapter (sold separately) and freely downloadable Castle Link Windows software. Telemetry Link Capable: Yes Tech Notes: The Sidewinder Micro 2 has 3.5mm bullet connectors on the motor wires and the battery input wires are bare. You must add the connector of your choice to the battery leads. We recommend a high current connector rated for at least 40 amps. Motor Specs: Input Voltage Range: 2S LiPo, 4-7 cell NiMH Kv: 8200 Max. RPM: N/A Length: 38.1mm Diameter: 20mm Shaft Diameter: 2mm Shaft Length: 12mm Weight: 50g Mounting Hole Specifications: 2.5mm holes @ 1/2”, 14MM, 5/8” Cooling Fan: No Connectors: 3.5mm male bullets Items Needed for Operation: N/A Product Use Statements: N/A Application Guidelines: Intended for 2WD and lighter 4WD vehicles (<0.9kg) Max. Recommended Vehicle Weight: 900g Tech Notes: Monitor motor temperatures closely; overheating a motor will cause permanent damage to the magnets. Never exceed 82°C on the the motor or ESC.

1.495,-

1.695,-

KJØP
-12%

Kunder kjøpte også

Hovedbilde Power HD LW-25MG WP TRX-4 25kg/0.14s Hovedbilde Power HD LW-25MG WP TRX-4 25kg/0.14s
Power HD LW-25MG WP TRX-4 25kg/0.14s
Power HD LW-25MG WP TRX-4 25kg/0.14s Power HD HV servo spesialtilpasset til Traxxas TRX-4 med 36cm kabel, passer også andre 1/10 crawlere. Flott og motstandsdyktig utførelse i aluminiums-hus med gir i kobber og aluminium. Servoen er vannbestandig og div servohorn og skruer medfølger. Traxxas anbefaler at man benytter ekstern BEC ved bruk av sterke servoer i TRX-4, se anbefalt tilbehør (TRX-2262). Andre biler er også anbefalt å benytte ekstern BEC dersom den interne BEC-sløyfen er svak. Spesifikasjoner: Kraft 6.6V: 23kg/cm Hastighet 6.6V: 0.16s Kraft 7.4V: 25kg/cm Hastighet 7.4V:    0.14s Vekt: 72g Gir: Kobber & Alu Størrelse: 40.7 x 20.5 x 38.6mm Servohorn 25T Futaba Style   Product details in english Spesifications: Torque(6.0V): 23.0 kg-cm (319.4 oz/in) Torque(7.4V): 25.0 kg-cm (347.2 oz/in) Speed: 0.16 sec (6.0V) ? 0.14 sec (7.4V) Operating Voltage: 6.0 - 8.4 DC Volts Weight: 72 g (2.54 oz) Bearing Type: Ball Bearing x2 Motor Type: DC Motor Gear Type: Copper & Aluminum Operating Temperature:    -20°C-60°C Size: 40.7 x 20.5 x 38.6 mm ( 1.60 x 0.81 x 1.52 in)

699,-

749,-

KJØP
-7%
Hovedbilde Traxxas 5671 Geode 3.8
Traxxas 5671 Geode 3.8" Chrome Wheels Summit (2)
These are the 3.8" Chrome Geode Wheels for use on the                     Traxxas Summit Truck RTR (TRAC38**). FEATURES: Nylon construction           Beadlock style           Chrome in color INCLUDES: Two Chrome 3.8" Geode Wheels REQUIRES: Tires           Beadlock Sidewall Protectors. SPECS:    Outer Diameter: 96.5mm (3.8")           Width: 70.5mm (2.8")           Hex: 17mm

145,-

KJØP
Hovedbilde Yeah Racing WPT-0143 T-Plug Cable w/ External Jst Plug Hovedbilde Yeah Racing WPT-0143 T-Plug Cable w/ External Jst Plug
Yeah Racing WPT-0143 T-Plug Cable w/ External Jst Plug
Yeah Racing T-Plug Cable w/ External Jst Plug Description: Use this as an adaptor on your power lead to get an extra JST plug with battery voltage on top to your normal T-Plug connection. Feature: For: For: Powering Fans or Winches, Servos Material: Plastic Color: Black/Red Include: T-Plug Cable w/ External Jst Plug (1 pc)

39,-

KJØP
Hovedbilde Traxxas 6591 LED Kit Pro Scale Advanced Lighting ... Hovedbilde Traxxas 6591 LED Kit Pro Scale Advanced Lighting ...
Traxxas 6591 LED Kit Pro Scale Advanced Lighting ...
Traxxas 6591 - Pro Scale Lighting Kit Traxxas LED lighting sets the standard for adventure after dark with authentic shadow-chasing brightness on the trail. Now, Traxxas LED lighting is even more realistic with the new Pro Scale Advanced Lighting Control System. The Pro Scale system puts you in command of high- and low-beam headlights; turn signals; brake lights; reverse lights; and even hazard signals for the ultimate in scale off-roading. Kit Contents: Pro Scale Lighting Power Module Power module chassis mount Pro Scale Lighting Distribution Block Motor sense wire harness Breakaway cable (part of the distribution block) MAXX® Link cable (Data Link) (TQi Radio System only) Receiver communication cable 2.6x8mm button-head cap screw (2) 2.5x10mm countersunk cap screw (1) 2.5x12mm cap screw (1) 2.5x18mm cap screw (1) Zip ties (10) Silicone grease Tools required: 2.0mm hex wrench (part #3415, sold separately) Wire cutters (to trim zip ties) Small needle nose pliers *Requires Traxxas Link App (available in the Apple App Store™ or on Google Play™) and TQi transmitter with the Traxxas Link Wireless Module (part #6511, sold separately).

649,-

699,-

KJØP
-7%
Hovedbilde Traxxas 3647 Nuts 4mm Flanged Nylon Locking Steel (8)
Traxxas 3647 Nuts 4mm Flanged Nylon Locking Steel (8)
This is the Traxxas Flanged Nylon Locking Nuts. FEATURES: Steel serrated construction INCLUDES: Eiqht 4mm flanged nylon locking nuts SPECS:    Outside diameter: 7mm

39,-

KJØP
Hovedbilde HPI Racing 101142 Hard Differential Gear Set
HPI Racing 101142 Hard Differential Gear Set
HPI Racing 101142 Hard Differential Gear Set Install these hardened diff gears in your Trophy 3.5 to dramatically increase the durability. This Part Fits the following kits / parts: Vorza Flux Vorza Flux Buggy Vorza S Flux Buggy Vorza Truggy Flux Vorza S Truggy Flux This Part Fits the following option kits / parts: Trophy Truggy 4.6 Trophy 3.5 Trophy Buggy 3.5 Trophy Truggy 4.6 Trophy Buggy Flux Trophy Truggy Flux Vorza Nitro Buggy Vorza Nitro Truggy

189,-

199,-

KJØP
-5%
Hovedbilde Bronto Silikonkabel 10AWG
Bronto Silikonkabel 10AWG
1 meter rød silikonkabel 1 meter svart silikonkabel Bronto silikonledning av høy kvalitet. Leveres i pakning med 1 meter rød og 1 meter svart.   Spesifikasjoner   AWG 10 Diameter 3.26mm Areal 8.35mm2 PS! Vær oppmerksom på at vi har samme produktbilde på alle ledningstykkelser, og at produktutseendet derfor vil avvike noe fra bildet.

149,-

KJØP
Hovedbilde Castle Creation 011-0145-00 Direct Connect Sensor Wire ... Hovedbilde Castle Creation 011-0145-00 Direct Connect Sensor Wire ...
Castle Creation 011-0145-00 Direct Connect Sensor Wire ...
Castle Direct Connect Sensor Wire 200mm   CLEAN UP YOUR WIRING The Direct-Connect Sensor Wire eliminates the need for the Castle sensor harness adapter. This eliminates a connection point and makes your installation cleaner. One end has the standard ROAR sensor plug that connects to the back of any sensored motor. The other end plugs directly into any waterproof, sensored-capable Castle ESC. Compatible ESCs: Mamba Micro X Mamba Micro X2 Mamba X Mamba Monster X Mamba Monster X 8s Mamba XLX2 Copperhead 10   Available lengths: 200mm (7.9") 250mm (9.8") 300mm (11.8") INSTALLATION INSTRUCTIONS www.castlecreations.com/directconnect

229,-

KJØP
Hovedbilde Castle Creations 8.0mm Bullet Connectors(3)
Castle Creations 8.0mm Bullet Connectors(3)
 This is a package of 8mm Female and Male Bullet Connectors                             from Castle Creations. FEATURES: Sized for stranded wire sizes from 13 to 8 gauge Handles up to 300A current INCLUDES: Three Male and three Female Bullet Connectors REQUIRES: Soldering wires to connectors SPECS: Diameter: 0.31" (8mm) Length: 0.59" (15mm)

199,-

219,-

KJØP
-9%
Hovedbilde Castle Creations 6.5mm Bullet Connector 13G/8G 200A ...
Castle Creations 6.5mm Bullet Connector 13G/8G 200A ...
 These are the 6.5mm High Current Bullet Connectors from Castle Creations. FEATURES: Gold plated           Fits wire diameter up to 6.5mm           Use 13-8 gauge wire           Up to 200A current INCLUDES: Three sets of bullet connectors REQUIRES: Solder and soldering iron SPECS:    Length: .59" (15mm)           Inside diameter: .15" (4mm) (where the wire is soldered to)           Outside diameter: .25" (6.5mm)

219,-

239,-

KJØP
-8%
Hovedbilde Arrma 311018 Main Input Gear, 14T GP6
Arrma 311018 Main Input Gear, 14T GP6
MAIN INPUT GEAR 14T GP6 #ARA311018 Product Details This high quality 14T GP6 Main Input Gear is the perfect part to carry in your RC tool box. Features Constructed from hard-wearing steel for long-lasting durability and consistent performance - Straight-cut tooth profile - 14 precision manufactured gear teeth for smooth operation in extreme RC conditions - GP6 (gear profile) configuration to be used with matching GP6 Main Diff Gear Includes 1 x Main Input Gear 14T Straight Cut GP6 Requires To be paired with ARA311019 - MAIN DIFF GEAR 45T GP6

189,-

KJØP
Hovedbilde Traxxas 5136X Differential Oil Kit Revo
Traxxas 5136X Differential Oil Kit Revo
This is the Diff Oil Kit for the Revo by Traxxas. FEATURES: Three bottles of oil (10K,30K,50K weights). INCLUDES: Three 2oz (59ml) bottles of oil           Three pour spouts

249,-

KJØP
Hovedbilde DynoMAX 9310 Connector QS8-S Anti-Spark (8mm) Pair Hovedbilde DynoMAX 9310 Connector QS8-S Anti-Spark (8mm) Pair
DynoMAX 9310 Connector QS8-S Anti-Spark (8mm) Pair
DynoMAX 9310 Connector QS8-S Anti-Spark (8mm) Pair This is a heavy duty gold plated connector with built-in antispark resistors that are great for high powered electric models. The QS8-S connector gives you a constant charging of the capacitors on the ESC and allows the battery to be connected without sparks on your ESC when you first plug in. Features: HEAVY DUTY Built in Anti-Spark Function (5.1 ohm resistor) Not compatible with our EC8 connector Specs: Continuous Current: 110A Max Peak Current: 500A Max Wire Size: 6AWG (aprox 6-7mm dia of the exposed wire) Max outer dia of the wire insulation: 8.8mm Connectors: 8mm Gold Plated Brass Case Material: Fiber Reinforced Nylon Length (total assembled): 60.9mm Width: 29.7mm Height: 15.4mm Weight: 41.7g

159,-

219,-

KJØP
-27%
Hovedbilde Arrma 311019 Main Diff Gear, 45T GP6
Arrma 311019 Main Diff Gear, 45T GP6
Arrma Main Diff Gear, 45T GP6 Product Details This high-quality 45T GP6 Main Diff Gear is the perfect part to carry in your RC tool box. Features Machined from strong steel for long-lasting durability and consistent performance - Straight-cut tooth profile - 45 precision manufactured gear teeth for smooth operation in extreme RC conditions - GP6 (gear profile) configuration to be used with GP6 Main Input Gear - Fits on #AR310433 Includes 1 x Main Diff Gear 45T Straight Cut GP6 Requires To be paired with #ARA311018 To be used with #AR310433

319,-

KJØP
Hovedbilde Proline 1/6 Hyrax XL G8 Front/Rear 2.9 Hovedbilde Proline 1/6 Hyrax XL G8 Front/Rear 2.9
Proline 1/6 Hyrax XL G8 Front/Rear 2.9" Rock Crawling ...
Pro-Line oppgir at de passer direkte på standard Axial SCX6 2.9" beadlock-felg. Dekkene er 185 × 70 mm. Proline 1/6 Hyrax XL G8 Front/Rear 2.9" Rock Crawling Tires (2) Key Features Designed for Maximum Performance Highly Detailed Sidewall for Scale Looks Stepped Blocks & Multiple Sipes Create Unmatched Grip Tackle Tough Terrain in Scale Style Made in the Legendary G8 Compound   In The Box (2) Hyrax XL 2.9" G8 Rock Terrain Tires for SCX6™ (2) Open Cell Foam Inserts Features: Designed for Maximum Performance Highly Detailed Sidewall for Scale Looks Stepped Blocks & Multiple Sipes Create Unmatched Grip Tackle Tough Terrain in Scale Style Made in the Legendary G8 Compound Overview: Take your SCX6™ to the ultimate level of rock-climbing performance with Pro-Line's Hyrax XL Tire in G8 compound! Designed from the ground up for incredible grip and stability on the toughest terrain, the Hyrax XL 2.9" tire is ready to tackle anything your Axial® SCX6™ can dish out. The Hyrax features an aggressive open tread pattern with each tread block containing multiple sipes for improved traction and comes in at a massive 7.28" tall and 2.75" wide. The highly detailed connected tread on the sidewall of the Hyrax extends out for added scale realism and sidewall rigidity to help prevent traction rolls. The Hyrax is made from the same G8 compound as the 1.9" crawler tires, so you know it provides the performance and durability that you can depend on. This tire will fit directly onto the stock 2.9" SCX6™ bead-loc wheel. Don't get left behind, take your adventure to the next level with Pro-Line's Hyrax tires! Please note: All tires & wheels are sold in pairs, unless otherwise noted Hyrax XL 2.9" G8 Rock Terrain Tires (2) for Axial® SCX6™ Front or Rear Fits: Axial® SCX6™ (AXI05000T1 / AXI05000T2) Product Specifications Manufacturer # 10186-14 Product Width 2.75" (70 mm) Insert Material Open Cell Product Height 7.28" (185 mm) Quantity Option 2 in a package Tire Compound G8 (Soft Rock) Wheel Position Front/Rear Package Type Tires and Inserts Tire Type Rock Crawling Track Surface Rock Crawling Inner Tire / Outer Wheel Diameter 2.9 in Compound / Hardness Soft Rock Scale 1/6 Vehicle Type Rock Crawler Tire Tread Hyrax

199,-

599,-

KJØP
-67%
Hovedbilde Traxxas 3971 Screws, 3x35mm cap-head machine (hex ...
Traxxas 3971 Screws, 3x35mm cap-head machine (hex ...
Screws, 3x35mm cap-head machine (hex drive) (6)

39,-

35,-

KJØP
Hovedbilde Traxxas 6454 Stub Axle Front 6mm XO-1
Traxxas 6454 Stub Axle Front 6mm XO-1
These are the 6mm Front Stub Axles for the Traxxas XO-1. FEATURES: Hardened steel construction           6mm diameter at axle pin area INCLUDES: Two 6mm Front Stub Axles

99,-

KJØP
Hovedbilde Traxxas 5353 17mm Splined Wheel Nuts Anodized Blue (4)
Traxxas 5353 17mm Splined Wheel Nuts Anodized Blue (4)
      These are the optional 17mm Splined Wheel Nuts for the New              T-Maxx 3.3 4WD Nitro Monster Truck RTR FEATURES: Aluminum construction, blue anodized in color INCLUDES: Four aluminum splined wheel nuts REQUIRES: Installation on the vehicle

129,-

149,-

KJØP
-13%
Hovedbilde Traxxas 3964 Cap Head Machine Screw 3x32mm Revo (6)
Traxxas 3964 Cap Head Machine Screw 3x32mm Revo (6)
This is a package of six 3X32mm Cap Head Screws from Traxxas. FEATURES: Black finish           Steel construction           Cap head design INCLUDES: (6) 3X32mm cap head machine screws SPECS:    Length:   1.260"    (32mm)           Diameter:  .119"    ( 3mm)           MM Pitch:  .5 coarse

35,-

KJØP
Hovedbilde Traxxas 2592 Screws 3x40mm Button-Head Machine Hex ...
Traxxas 2592 Screws 3x40mm Button-Head Machine Hex ...
These are the Traxxas Button-Head 3 x 40mm Screws. FEATURES: Metal construction           Black in color INCLUDES: Six 3 x 40mm button-head hex machine screws REQUIRES: Installation on the vehicle

39,-

KJØP
Hovedbilde Tamiya 86031 PS-31 Polycarb Spray Smoke 3 oz
Tamiya 86031 PS-31 Polycarb Spray Smoke 3 oz
This is Tamiya Color Spray Lacquer for Polycarbonate (PS-31 Smoke).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.

109,-

119,-

KJØP
-8%
Hovedbilde CASTLE CREATION COPPERHEAD 10 SENSORED ESC SCT EDITION ... Hovedbilde CASTLE CREATION COPPERHEAD 10 SENSORED ESC SCT EDITION ...
CASTLE CREATION COPPERHEAD 10 SENSORED ESC SCT EDITION ...
CASTLE CREATION COPPERHEAD 10 SENSORED ESC SCT EDITION W / 1412-3200KV 5MM SENSORED MOTOR Meet the COPPERHEAD 10 PERFORMANCE ESC. It takes to the open road as well as it takes to no road at all.  This completely new design rounds out our 1:10 scale offerings, positioned between the SIDEWINDER 4 as the entry-level upgrade and the MAMBA X as the extreme performance option. The COPPERHEAD 10 includes CRYO-DRIVE™ TECHNOLOGY, SENSORED MOTOR SUPPORT and DATA LOGGING LITE* with Castle’s signature reliability and performance.  Throughout its development the Copperhead has been put to the test in all types of elements and performed as aggressively, or as stealthy, as desired. Whether on the trail dominating the gates or throwing dust on the dirt track, the Copperhead is power hungry when you need it and oozes smooth low-end power for technical low RPM performance. If your rig is outfitted with high-power servos (or additional torque increasing modifications) there is no need to worry about brown-outs, glitching or slow actuating servos. The Copperhead provides clean and constant power with its user selectable (through Castle Link) 5.5V or 7.5V (6A peak) internal BEC.  The ESC can be installed and calibrated (plug and play) and provide immediate fuss-free wheel time. Through the interface-free manual programming mode, using your transmitter you can set your low-voltage cutoff, brake/reverse type, brake amount, drag brake, motor type and direction. Likewise, you can employ the use of the Castle Link Programming Suite on your Windows™ PC (coupon for free USB adapter included with purchase), or wirelessly with the convenience of the new B-Link™ Bluetooth™ Adapter and Castle Link app for Android or iOS.  Additional Castle Link benefits include access to all firmware updates and added features sets released from Castle Engineering (at no charge), the ability to download and analyze your collected Data Log , an Intuitive Demo Mode capability as well as the option to save setup profiles (for multiple vehicles) for later use. For crawler setups or others that do not require an ESC cooling fan, the fan is easily removed with four screws and the fan guard with the cool COPPERHEAD logo simply clicks back into place on the top of the ESC. It keeps the COPPERHEAD 10 looking mean and provides an extra measure of protection.  To further protect your investment, the COPPERHEAD emits audible alerts for easy diagnosis of common issues such as motor-over-temperature and low-voltage cutoff. You'll find a handy decal in your box that contains a reference chart for the eight alert tones, no need to Google while your enjoying your wheel time! We’ve packaged the COPPERHEAD 10 with a dozen different 4-POLE 12-SLOT sensored motor options to eliminate the guesswork in finding the right brushless power upgrade for your basher, crawler, on road vehicle, short course or monster truck. An added bonus of pairing your Copperhead with a Castle 4-Pole 12-Slot sensored motor is enabling SMARTSENSE™ TECHNOLOGY, which uses the motor’s sensors at startup to provide cog-free starts, excellent torque and low-speed drivability. Once the motor is turning, the ESC seamlessly transitions to Castle’s ultra-efficient sensorless mode with electronic timing to advance timing automatically for peak performance in all driving conditions.    The all-new COPPERHEAD 10 PERFORMANCE 1:10 SCALE ESC is ideal for those who want sensored motor support, data logging, a 6A peak selectable internal BEC (5.5V or 7.5V) and Castle’s signature reliability and performance in the meanest looking ESC around! If you’re looking to transform your 1:10 scale stock vehicle from dull to dangerously fun COPPERHEAD can do it with its buttery smooth starts, CRYO-DRIVE enabled performance and up to 4S power in a compact, easy-to-install footprint.  COPPERHEAD 10 FEATURES: Input Voltage Range for 1412-3200Kv 5mm Combo : 2s-4s LiPo  SMARTSENSE™, SENSORED ONLY and BRUSHED Running Modes Selectable 5.5V or 7.5V (6A peak) internal BEC (Battery Eliminator Circuit) CRYO-DRIVE™ Technology minimizes the amount of time the ESC’s electrical components spend generating heat, resulting in improved thermal performance during partial throttle operation where the majority of driving occurs. ESC is housed in a durable injection molded case and potted in WATERPROOF epoxy to protect the electronics and promote efficient heat transfer.  30mm removable fan and DUAL USE FAN GUARD Compatible with S.BUS2 Telemetry Link and Futaba T4PX, T7PX and T7PXR transmitters AUDIBLE ALERTS for easy diagnosis of common issues such as motor-over-temperature and low-voltage cutoff. Convenient TRANSMITTER PROGRAMMING for six common adjustable settings inlcuding cutoff voltage and drag brake.  DATA LOGGING LITE* captures and records performance data from your vehicle to maximize performance and battery life. (Battery Voltage Battery Ripple, Controller temp, Motor RPM, Motor Temp) SMARTSENSE™ uses the motor’s sensors at startup to provide cog-free starts, excellent torque and low-speed drivability. Once the motor is turning, the ESC seamlessly transitions to Castle’s ultra-efficient sensorless mode. CASTLE LINK USB programming kit (coupon included with purchase)  Optional smartphone-based programming with the B-LINK™ BLUETOOTH ADAPTER (sold separately) and Castle Link App available on Google Play or Apple App Store COPPERHEAD 10 1412-3200KV 5MM COMBO COMES WITH: Copperhead 10 ESC with sensor harness 1412-3200KV 5mm Sensored Motor  Copperhead decals and Audible Alert Reference Chart Coupon for free Castle Link USB Copperhead Quick Start Guide Sensor port dust cover   ESC Specs Application Guidelines: 1:10 scale vehicles  Input Voltage Range: Min: 2s LiPo Max: 4s LiPo (16.8V) Running Modes: SMARTSENSE™, Sensored Only and Brushed Motor Operation Brake: Proportional Reversible: Yes, but may be disabled for racing. On/Off Switch: Yes, waterproof Cooling Fan: Yes, factory equipped (30mm), fully removable** and includes dual use fan guard  (See Operating Use Statements) Size: 2.19" x 1.39" x 1.33"  Weight (with wires): 70.9 g / 2.50 oz. Motor Connectors: 4.0mm female bullets for motor connection Items Needed for Operation: Battery Connector required, Castle 4.0mm Polarized Connectors, Traxxas® Power Connectors, or Deans® Ultra Plugs are recommended. Operating environment: Waterproof design for all weather conditions. Although COPPERHEAD 10 is waterproof, it is not intended for operation while completely submerged in liquid. Always rinse the ESC and motor with clean water after exposure to corrosives or dirt. While the motor and controller may be waterproof, we suggest users confirm that the rest of their vehicle, including the batteries, servos, radio and chassis are also waterproof before exposing them to liquids of any kind. **The cooling fan must be removed prior to driving in wet conditions. It is not waterproof. Programmability: Fully programmable Castle feature set using Castle Link USB adapter (coupon for free link included in package) and freely downloadable Castle Link Windows software, or the Castle Link App and a B-LINK Bluetooth Adapter (sold separately). Telemetry Link Capable: Yes, with Castle Creations Telemetry Link for S.BUS2 and Futaba T4PX, T7PX and T7PXR Transmitters. Tech Tips:     Motor Specs Input Voltage Range: 2s-4s Kv: 3200 Max. RPM: 75,000 Motor Size: Length: 62.5mm Diameter: 36mm Shaft Size: Length: 21mm Diameter: .197" (5mm) Weight (w/wires): 265.4g (9.4oz) Mounting Hole Specifications: M3 @ 25mm Cooling Fan: Optional - Coming Soon Connectors: 4mm male Castle Bullet Connectors Items Needed for Operation: Compatible Electronic Speed Control (ESC) Running Modes:  SmartSense™ (with Castle Sensor capable ESC), Sensored and an ultra-efficient Sensorless mode Application Guidelines: Ideal for 1:10 scale 2WD and 4WD SC Trucks up to 6.5lbs and up to 4s operation. Max. Recommended Vehicle Weight: Vehicles weighing up to 6.5 lbs. ready-to-run. Tech Notes: Water Resistant Design: The sensor board is coated with silicone conformal coating to protect the sensors from moisture. The sensor connections are not water resistant; water can cause signal loss which could result in loss of sensored capabilities. Castle recommended applying dielectric grease to the outside of the sensor wire connections after installation of the wire. Routine maintenance is recommended after running in wet conditions.

3.295,-

3.595,-

KJØP
-8%
Hovedbilde Yeah Racing YA-0489 1/10 Tire Cover For 1.9 Crawler ... Hovedbilde Yeah Racing YA-0489 1/10 Tire Cover For 1.9 Crawler ...
Yeah Racing YA-0489 1/10 Tire Cover For 1.9 Crawler ...
Yeah Racing 1/10 Tire Cover For 1.9 Crawler Wheels - Do Not Follow Description: Add character to your crawler rig with our series of tire covers with a wide variety of smart and clever messages. White ink printed on tough synthetic leather to help deal with harsh conditions and for easy cleaning after trail runs.         Features: For: 1.9 inch sized wheels Material: Synthetic Leather   Includes: Yeah Racing 1/10 Tire Cover For 1.9 Crawler Wheels 1pc

59,-

69,-

KJØP
-14%
Hovedbilde Traxxas 57046-4 DCB M41 Catamaran BL TQi TSM Orange Hovedbilde Traxxas 57046-4 DCB M41 Catamaran BL TQi TSM Orange
Traxxas 57046-4 DCB M41 Catamaran BL TQi TSM Orange
Traxxas 57046-4 DCB M41 Catamaran BL TQi TSM Orange Extreme Brushless Muscles and Speed! The DCB M41 Widebody catamaran, designed by DCB (Dave’s Custom Boats) founder Dave Hemmingson, is the largest model offered in the DCB M-Series. With its precision sculpted design and a pair of Mercury Racing 1350 engines, it speeds across the water at 175mph! Traxxas has faithfully captured the incredible looks and performance of the DCB M41 in a detailed scale replica that is versatile, fun, and fast. The catamaran hull has been accurately reproduced to deliver the speed, stability and confidence that the full-size M41 is famous for, allowing you to have fun wherever your marine adventures take you. The M41 replica is equally at home blasting across the waves at the lake on a fun run or exploiting its 50+mph speed on a favorite stretch of smooth water. The razor sharp handling lets you carve turns with authority and precision and yet, offers easy control while cruising by the shore. QUICK FEATURES ON TRAXXAS DCB M41 WIDEBODY (#57046-4) ­Fast! 80+kmh on 6S LiPo!* 40" DCB M41 Widebody Catamaran Replica Stable! Twin-hull catamaran performs across waves and smooth water Water-cooled, waterproof VXL-6s Marine speed control 6S LiPo compatible with built-in Low-Voltage Detection Traxxas High-Current Connectors (patented) Velineon 540XL high-output brushless motor with high flow water-cooling jacket Quick-release Power Module integrates power system with waterproof electronics Adjustable battery trays with hook-and-loop straps Blue-anodized aluminum rudder support, rudder, and drive strut Stainless steel trim tabs, and hardware TQi 2.4GHz radio system and 5-channel receiver Access the Traxxas Link app with the Traxxas Link Wireless Module TRX 6511 Traxxas Stability Management™ (TSM™) makes it easy to go fast Waterproof high-torque steering servo Sleek design with stunning factory-applied graphics for extra excitement and visbility Ready-To-Race Traxxas DCM M41™ Brushless Catamaran (#57046-4) SPECS Hull Type: Vacu-formed ABS, Catamaran, shoebox style Hull Length: 1003 mm Overall Length: 1030 mm Beam: 267 mm Height: 151 mm Deadrise & Transom: 14.5 degrees Weight: 2.46 kg (without batteries) Speed Control Type: Traxxas Velineon® VXL-6s, water-cooled Input Voltage: 2-6 LiPo Cells (14.8-22.2 Volts DC) BEC Voltage: 6.0 VDC BEC Current: 3A Thermal Protection: Thermal shutdown Low Voltage Detection: Yes (user enabled) Motor (electric): Traxxas Velineon® 540XL Brushless, water-cooled Drive System: Direct Drive, 0.150" Flex Cable Outdrive: Adjustable Aluminum Prop: 2-blade composite, 42x59mm Transmitter: TQi 2.4GHz (2-channel) Receiver: 6533 2.4GHz Traxxas Stability Management 5-channel Servo: 2056 High-torque waterproof Skill Level: 2 *Batteries and charger sold separately DCB and M41 Widebody are trademarks of Dave's Custom Boats, LLC used under license. Mercury Racing is a trademark of Mercury Marine. Images and specifications subject to change.

5.995,-

6.995,-

KJØP
-14%
Hovedbilde Yeah Racing TRX4-054 Brass 118g Portal Cover Front or ... Hovedbilde Yeah Racing TRX4-054 Brass 118g Portal Cover Front or ...
Yeah Racing TRX4-054 Brass 118g Portal Cover Front or ...
Brass 118g Portal Cover Front or Rear 2pcs For Traxxas TRX-4   Description: Add weight to your axles to get more from your tires with this set of Brass Portal Covers!     *Photos for reference only.   Feature: For: Traxxas TRX-4 Material: Brass Color: Brass   Include: Brass 118g Portal Cover Front (2 pcs) Screws (4 pcs)

569,-

599,-

KJØP
-5%

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png