Traxxas

Traxxas 5661 Motor Mount Hinge Post E-Revo

Art.nr: TRX 5661

29,-

Traxxas

Traxxas

På lager: 6

Du vil motta en e-post så snart produktet er på lager!

En feil har oppstått. Prøv igjen

Informasjon
Produsent

Informasjon

This is the Motor Mount Hinge Post for the Traxxas E-Revo.

FEATURES: Nylon construction
Black in color

INCLUDES: One Motor Mount Hinge Post
One 4x10mm socket cap screw with split and flat washer
One 4x12mm socket head screw

REQUIRES: Installation on the motor mount and vehicle

SPECS: Length: 22.45mm (0.88")
Diameter: 10mm (0.39")

Produsent

Traxxas

Traxxas

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

Hovedbilde RPM 80212 Front A-Arms Right Black Traxxas Revo (2) ...

RPM 80212 Front A-Arms Right Black Traxxas Revo (2) ...

RPM Front Right Arms for the Summit, Revo 3.3 & E-Revo (old) - Black Replaces stock Traxxas #5331 Quick Notes: Fits Traxxas Summit, Revo & E-Revo Replaces stock Traxxas #5331 Matching Front Left A-arms are also available Matching True-Track Rear End Conversion Kits are available (for the Revo & E-Revo) RPM Revo A-Arms are the only alternative to bulletproof performance that rivals any competition! Features: Nearly identical in weight to stock A-Arms. Redesigned for incredible durability under the toughest of conditions. More wear resistant than any other material available. Excess A-arm end-play has been eliminated for more accurate caster and toe angle settings. Angled leading and trailing edges eliminate dirt build-up. No low-hanging cross-braces or shock mounting areas providing better ground clearance. Massive shock rod mounting areas for improved rigidity. Available in black & blue. Less than half the price of aluminum A-arms. Molded from our bulletproof blend of nylons and backed by our world renowned breakage warranty. Sold in sets of one upper and one lower A-arm.

149,-

Hovedbilde Traxxas 5319X Aluminum Pushrod Red Revo (2)

Traxxas 5319X Aluminum Pushrod Red Revo (2)

These are the (optional) Red Aluminum Pushrods for the Rocker Arms for the REVO from Traxxas These go between the Rocker Arms and the Lower Suspension Arms **Must be used with Progressive-3 Rocker Arm Set FEATURES: Red Aluminum construction INCLUDES: Two Pushrods w/pre-installed rod ends and balls REQUIRES: Installing on the vehicle SPECS: Length: 5.3" (134mm) end to end including rod ends Diameter: 0.20" (5mm)

155,-

Hovedbilde M-DRIVE Hex/Allen Wrench Tool Set - 2, 2.5 & 3mm - ...

Hovedbilde M-DRIVE Hex/Allen Wrench Tool Set - 2, 2.5 & 3mm - ...

M-DRIVE Hex/Allen Wrench Tool Set - 2, 2.5 & 3mm - ...

M-DRIVE Hex/Allen Wrench Tool Set - 2, 2.5 & 3mm - Ball Hex High quality ball tipped hex/allen wrench tool set with black anodized aluminium handles and tough HSS steel in the tips. The wrenches are also available separately plus also spare tips/bits. Specs: Handle: Black anodized aluminium Laser Engraving: M-DRIVE logo & size/type Handle Diameter: 18.7mm Handle Length: 100mm Total Length: 180mm Tip/Bits Diameter: 3mm Tip/Bits Material: High quality HSS

179,-

199,-

-10%

Hovedbilde Traxxas 5353R Wheel Hubs Splined 17mm Red-Anodized (4)

Traxxas 5353R Wheel Hubs Splined 17mm Red-Anodized (4)

These are the optional 17mm Splined Wheel Hubs. FEATURES: Aluminum construction, red anodized in color Converts wheel hubs from 14mm to 17mm and allows the use of wheels with 17mm hex INCLUDES: Four aluminum splined Wheel Hubs and Nuts, four 4x13mm Screw Pins REQUIRES: Installation on the vehicle

289,-

299,-

-3%

Hovedbilde Traxxas 5452 U-Joints Drive Shaft

Traxxas 5452 U-Joints Drive Shaft

Erstatet av TRX 5452X These are the Drive Shaft Joints for the Traxxas Revo and E-max FEATURES: Steel universal joint set INCLUDES: Four Steel Universal blocks Four Steel Universal pins Two black steel set pins Four steel hinge pins Four steel bearing pins Eight 1.4mm e-clips REQUIRES: Installing on Traxxas Revo

Hovedbilde Traxxas 5352A Heavy Duty Rebuild Kit Revo/Maxx Trucks

Traxxas 5352A Heavy Duty Rebuild Kit Revo/Maxx Trucks

Traxxas 5352A - Rebuild kit, slipper clutch (steel disc/ friction pads (3)/ spring (1)/ 2x9.8mm pin/ 5x8mm MW/ 5.0mm NL (1)/ 4.0mm NL (1)) The slipper clutch rebuild kit includes a new steel disc, friction pads (3), spring, pin, 5x8 washer, 4 mm locking nut, and 5 mm locking nut. Fits 5351 pressure plate and hub. Traxxas Slipper Clutch Rebuild Kit Revo/T-Maxx Traxxas Slipper Clutch Rebuild Kit Revo/T-Maxx

99,-

Hovedbilde Traxxas 5451X Driveshaft assembly (1), left or right

Traxxas 5451X Driveshaft assembly (1), left or right

Traxxas 5451X Driveshaft assembly (1), left or right (fully assembled, ready to install)/ 4x15mm screw pin (1)

149,-

169,-

-12%

Hovedbilde Traxxas 5677 Gearcover/ 3x8mm CS (1)

Traxxas 5677 Gearcover/ 3x8mm CS (1)

Cover, gear/ 3x8mm CS (1) Not intended for use with Traxxas telemetry system.

39,-

Hovedbilde Traxxas 5624 Receiver Box

Traxxas 5624 Receiver Box

Box, receiver (sealed)/ foam pad/ silicone grease/ 3x8mm BCS (2)/ 2.5x8mm CS (2)/ 3x6mm BCS (2) Waterproof receiver box includes foam pad, silicone grease, 3x8 mm screws (2), 2.5x8 mm screws (2), and 3x6 mm screws (2).

149,-

Hovedbilde Traxxas 5411 Wing Mount Revo

Traxxas 5411 Wing Mount Revo

This is the Wing Mount for the Traxxas Revo FEATURES: Nylon Construction Black in Color INCLUDES: Two Wing Supports One Wing Mount Four 4mm x 8mm Cap Head Socket Screws Four 3mm x 12mm Cap Head Socket Screws One Instruction Sheet REQUIRES: Installation

119,-

Hovedbilde Traxxas 3969 Output Shaft Transmission E-Maxx

Traxxas 3969 Output Shaft Transmission E-Maxx

This is the Transmission Output Shaft for the Traxxas E-Maxx. FEATURES: Metal construction, black in color INCLUDES: One transmission output shaft, Part #5369 REQUIRES: Installation on the Traxxas E-Maxx SPECS: Overall length: 2.75" (70mm) Diameter of drive dog mount: .39" (10mm) Diameter of shaft: .23" (6mm)

89,-

Hovedbilde Traxxas 3961 Spur Gear 0.8P 68T

Traxxas 3961 Spur Gear 0.8P 68T

This is the optional .8 Metric Pitch 68 Tooth Spur Gear for the Traxxas E-Maxx. FEATURES: Nylon construction, black in color .8 metric pitch INCLUDES: One 68T 0.8 metric pitch spur gear REQUIRES: Installation on the vehicle SPECS: Diameter: 2.16" (55mm) Thickness: .23" (6mm)

39,-

Hovedbilde Traxxas 8241 Axle housing Front TRX-4

Traxxas 8241 Axle housing Front TRX-4

Axle housing, front

129,-

Hovedbilde Traxxas 5185 Rubber Tires Wheelie Bar Wheels (2)

Traxxas 5185 Rubber Tires Wheelie Bar Wheels (2)

These are the Rubber Tires for the Wheelie Bar for all Traxxas vehicles. Dette er dekk til TRX 5186 og TRX 5186A. FEATURES: Constructed of rubber, black in color with with "TRAXXAS" written in white on the sidewalls INCLUDES: Two Rubber Tires for the Wheelie Bar REQUIRES: Fastening to wheels SPECS: Outer Diameter: 1.1" (29mm) Inner Diameter: 0.75" (19mm) Width: 0.51" (13mm)

85,-

Hovedbilde Castle Creations 011000400 Vifte til Mamba Monster ...

Castle Creations 011000400 Vifte til Mamba Monster ...

This is the Motor Cooling Blower Fan and Shroud from Castle Creations. Features: Fits motors with outside diameter between 1-1/2 and 1-7/8" (38 - 47mm) such as the Castle Creations Neu-Castle 2200 and 2650 Plugs into receiver and drops motor temperature as much as 30°

269,-

Hovedbilde Traxxas 5180 Ball Bearings 6x13x5mm E-Revo (2)

Traxxas 5180 Ball Bearings 6x13x5mm E-Revo (2)

This is a set of Traxxas 6x13x5mm Ball Bearings for use on the E-Revo FEATURES: Stainless Steel bearing construction Blue rubber dirt shields INCLUDES: (2) 6x13x5mm ball bearings Part #5180 SPECS: Inside diameter: 6mm (0.24") Outside diameter: 13mm (0.51") Width: 5mm (0.20")

65,-

Hovedbilde Traxxas 5334R Axle Carrriers Left & Right/Bearing ...

Traxxas 5334R Axle Carrriers Left & Right/Bearing ...

These are the Optional Axle Carriers L & R for use on the Traxxas Revo series, E-Maxx, T-Maxx and Summit FEATURES: Nylon Construction Black in Color Allows for Oversized Bearing use INCLUDES: One Left Axle Carrier One Right Axle Carrier Four Dust Boot Retainers Two Bearing Spacers REQUIRES: Installation

109,-

119,-

-8%

Hovedbilde Zap Blue Adhesives Thread Locker .20 oz

Zap Blue Adhesives Thread Locker .20 oz

Pacer has designed this bottle of Threadlocker Compound to be used on metal fasteners. It is not recommended for plastic parts. INCLUDES: One bottle of Pacer Threadlocker SPECS: Size: 0.20 ounces (6ml) FEATURES: Medium strength general purpose thread locker Locks threaded fasteners against vibration Perfect for use in helicopters and all RC cars Clean and dry parts for best results (removing grease, oil and dirt) Parts can be returned to service immediately in MOST CASES Thread locking compound comes in a Red bottle with a clear nozzle tip COMMENTS: This bottle of glue will appear big in context to the glue. The reason being is the glue requires a large amount of oxygen or the glue will dry out. All one would need to do once you have the glue is shake the bottle and turn upside down, if the tip turns Blue then the glue is present. To some the bottle may appear empty.

59,-

Hovedbilde Traxxas 5617 Fender Flairs Front/Rear Summit (4)

Traxxas 5617 Fender Flairs Front/Rear Summit (4)

These are the Front and Rear Fender Flairs for use on the Traxxas Summit 1/10 Truck RTR. FEATURES: Nylon and rubber construction Black in color INCLUDES: Two Front Fender Flairs Two Rear Fender Flairs Two Front Fender Flair Retainers Two Rear Fender Flair Retainers Twenty Two 2.6x6mm Cap Screws REQUIRES: Installation on the vehicle

169,-

Hovedbilde Traxxas 5675 Motor Titan 775 10-Turn/16.8 Volts

Traxxas 5675 Motor Titan 775 10-Turn/16.8 Volts

This is the Traxxas 775 Titan Motor. FEATURES: Five-pole armature for superior torque and smoothness Fan-cooled Heavy-duty 5mm output shaft Features an extra wrap of steel around the can for maximum magnetic field strength INCLUDES: One Traxxas Titan 775 with preinstalled leads and connectors REQUIRES: Installation on vehicle SPECS: Can Diameter: 46.35mm (1.8") Can Length: 67mm (2.6") Shaft Diameter: 5mm (0.20") Shaft Length: 13.5mm (0.53") Input: 16.8V Turns: 10 turns

469,-

499,-

-6%

Hovedbilde Traxxas 5356 Rocker Arm Set Long Travel Revo

Hovedbilde Traxxas 5356 Rocker Arm Set Long Travel Revo

Traxxas 5356 Rocker Arm Set Long Travel Revo

This is a Long Travel Rocker Set for the Traxxas Revo. FEATURES: Gray plastic construction "Long Travel" raised lettering on top of the rocker arms INCLUDES: (8) rocker arms, Part #5356 REQUIRES: Installation on the Traxxas Revo SPECS: Length: 2" (52mm) Width: 1-1/16" (27mm) Height: 7/16" (11mm) COMMENTS: This rocker arm set must be used with TRX 5318, or TRX 5318X, pushrod.

99,-

Hovedbilde Traxxas 2064 Servo Gear for servo TRX 2065

Traxxas 2064 Servo Gear for servo TRX 2065

-Disse passer til Summit 1/10 sine små TRX 2065 servoer. This is the replacement Servo Gear Set for the Traxxas 2065 Waterproof Sub-Micro Servo -TRX 2065 The 2065 servo is used in the E-Maxx Monster Truck Series. FEATURES: Nylon construction, white in color Replaces worn or damaged servo gears INCLUDES: One Output Gear One Top Reduction Gear One Offset Reduction Gear One Center Reduction Gear One Bottom Reduction Gear REQUIRES: Installation

59,-

Hovedbilde Traxxas 2250 Servo High-Torque 330 24kg Metal gear ...

Hovedbilde Traxxas 2250 Servo High-Torque 330 24kg Metal gear ...

Traxxas 2250 Servo High-Torque 330 24kg Metal gear ...

High-Torque 330 Blue Servo The Traxxas High-Torque 330 Blue servo combines maximum steering authority with a long list of high-performance features. The servo utilizes full metal gears, dual ball bearings, and an aluminum center section for added heat dissipation. A powerful coreless motor provides 330 ounce-inches of torque for the most demanding applications.* The High-Torque 330 servo is fully waterproof, not just “water resistant” and drops into most 1/10 Traxxas vehicles for that perfect factory fit. The Power to Perform With over 3 times more torque than the standard TRX 2075 servo, the High-Torque 400 provides noticeably faster turning speed and works great with TSM™ equipped vehicles. Traxxas High-Torque servos are the perfect upgrade for high-demand applications like Unlimited Desert Racer, Slash, Stampede, or almost any 1/10 Traxxas vehicle requiring extreme performance. Replace the E-Revo's dual servos with a single TRX 2255 for lighter weight, more torque, and lightning-quick steering response. Elevate your steering performance to the next level with the High-Torque red 400 servo. For TRX-4 Installation The Traxxas High-Torque 400 Red servo represents a huge power upgrade for the TRX-4. When installing this servo, it is required that you use the High-Voltage BEC kit TRX 2262 and a steel servo horn TRX 8247X is recommended. Installing the BEC is easy with plug and play simplicity. The kit includes a larger receiver box cover to maintain total waterproof integrity and a Y harness for vehicles with LED light kits. Waterproof Not "Water Resistant" Traxxas knows the difference between “water resistant” and waterproof. Traxxas High-Torque servos are completely waterproof to give you the freedom to run when you want, where you want. Power through streams and bogs without fear while trucks with “water resistant” servos are stuck on the sidelines. HIGH-TORQUE 400 RED FEATURES Factory fit for drop-in installation into Traxxas Models Fully waterproof, not “water resistant” Compatible with Traxxas Stability Management™ (TSM) 400 oz-in torque Metal gears Dual ball bearings Brushless motor technology Aluminum center case SPECIFICATIONS Motor Type: Brushless Operating Voltage: 6.0 - 7.4V DC Speed: 0.15 sec/60° Weight: 64g Gears: Metal Output Spline: 25T Case: Plastic top/bottom, anodized aluminum center Controller: Digital APPLICATION GUIDE Compatible with most Traxxas 1/10 scale electric models* Compatible with TRX-4 models using High-Voltage BEC Kit #2262 and #8247X metal servo horn Compatible with Traxxas nitro models using rechargeable 5-cell battery packs Not recommended for X-Maxx High-Torque Blue 330 Waterproof Metal-Gear Coreless Digital Servo For the ultimate experience in precision steering authority, two new high-torque metal gear waterproof servos are available from Traxxas. Traxxas high-torque servos are designed for a factory fit in 1/10 Traxxas vehicles and both servos feature full metal gears, dual ball bearings, and waterproof cases with aluminum center sections for added heat dissipation. Both servos are designed to work flawlessly with Traxxas Stability Management for laying down maximum power on any surface. The High-Torque Blue 330 is powered by a coreless motor for 24 kg/cm of torque and 0.19 transit time. For optimum control and responsiveness, the High-Torque Red 400 uses brushless motor technology for a massive 29 kg/cm of torque and 0.15 transit time. Factory fit for drop-in installation into Traxxas models Waterproof 24 kg-cm of torque and 0.19 transit time Metal gears Dual ball bearings Coreless motor technology Aluminum center case SPECIFICATIONS: Motor Type: Coreless Operating Voltage: 6.0-7.4V Torque: 24 kg/cm @ 6.0V Speed: 0.19 sec/60° @ 6.0V Weight: 64g Gears: Metal Output Spline: 25T Case: Plastic top/bottom, anodized aluminum center Controller: Digital

895,-

995,-

-10%

Hovedbilde Protoform 148700 Mazdaspeed6 Regular Weight Clear Body ...

Protoform 148700 Mazdaspeed6 Regular Weight Clear Body ...

Designed for 190mm wide touring cars, this is the Protoform Mazda Speed 6 Sedan body. FEATURES: Conforms to all ROAR, EFRA, FEMCA, FAMAR and IFMAR specs Two lower trims lines. One of the lower lines is for the slightly taller requirements of BRCA rules Clear .030" Lexan construction with paint-then-peel overspray film Clear .030" Lexan wing with mounting hardware Decal sheet with headlight and tail light decals Window mask INCLUDES: One Clear Mazda Speed 6 Body with Overspray Film One Decal Sheet One Window Mask Sheet Two 4-40x1/4" Button Head Screws (1/16" hex size) for wing mounting Two 4-40 Nylon Nuts for wing mounting REQUIRES: Body Scissors - and Reamer - and paint of modeler's choice SPECS: Length: 19.75" (502mm) Width: 7.5" (190mm) Height: 4.5" (115mm) (B6)

359,-

Hovedbilde Traxxas 6556 Mount Telemetry Expander ...

Traxxas 6556 Mount Telemetry Expander ...

Mount, telemetry expander (fits XO-1, E-Revo*, Summit*, all Maxx trucks, Revo 3.3, Slayer Pro 4X4) (*requires rear chassis brace #5632)

115,-