Hopp til innhold

Traxxas 3992 Input Shaft/Drive Assembly E-Maxx

Art.nr: TRX 3992

129,-

Traxxas

Traxxas

På lager: 2

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

  This is the replacement Input Shaft/Drive Gear Assembly for the
                    Traxxas 3905 E-Maxx Truck.

FEATURES: Steel shaft, black in color
          Steel drive gear assembly, silver in color

INCLUDES: One Input Shaft with 18 Tooth Top Gear

REQUIRES: Installation following the model manual

SPECS:    Shaft Diameter: 5mm
          Shaft Length: 3.53" (90mm)
          Thread Size: 4mm

 

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

WLToys 18428.0441.001 1x16.5mm R Cell Pin Body Clips

29,-

39,-

KJØP
-26%
This is the Extra Hard 19 Tooth 32 Pitch Blackened Finish Pinion Gear  from Robinson Racing.     FEATURES Extra hard high carbon construction  For use with the Robinson Racing GEN3 steel slipper units  Fits 5mm motor shaft   INCLUDES 19 Tooth 32 Pitch Blackened Finish Pinion Gear  4mm Set Screw

239,-

KJØP
This is an optional Robinson Racing 60T Steel Spur Gear and Hi Performance Slipper Unit for the Traxxas E-Revo with Mamba. FEATURES: Steel construction Silver in color INCLUDES: 60 tooth steel spur gear Aluminum back plate Hex slipper pad 7x13mm bearing Aluminum spacer Four cone washers Instructions Decals REQUIRES: Installation onto E-Revo

759,-

KJØP
This is the Differential Ring Gear and Pinion                  for use with the Traxxas Revo 3.3 and many other Traxxas Cars. FEATURES: Direct replacement part INCLUDES: One differential ring gear           One pinion gear REQUIRES: Traxxas Revo 3.3           2.5x8mm cap head screws TRX 3965

219,-

Ikke på lager
Axle housing, front

129,-

KJØP
    This is the Transmission Output Shaft for the Traxxas E-Maxx. FEATURES: Metal construction, black in color INCLUDES: One transmission output shaft, Part #5369 REQUIRES: Installation on the Traxxas E-Maxx SPECS:    Overall length: 2.75" (70mm)           Diameter of drive dog mount: .39" (10mm)           Diameter of shaft: .23" (6mm)  

89,-

KJØP
Dusty Motors Dust Protection Cover for Traxxas E-revo & Summit - Black DMC0011 This is a high quality, hand made, dust and water splash proof shroud, designated to fit a particular model. Shroud comes with a zipper, which allows to access the internals of a model i.e. connecting/disconnecting  batteries and turning a model on/off without removing a shroud. While taking a break between the running  stints the shroud can be unzipped to allow ESC and motor to cool quicker.  Shroud is made from the highest quality materials. That is why it is strong, durable and efficient. The open  area of a material is more than 50% of total shroud surface, so it ensures a very good airflow in order to  keep the model electronics cool. Shock absorber cover is included into the package. Shock absorber cover comes in one long piece, so it could be cut into lengths that particular shock absorbers require. Cover is made from elastic material in order to fit shock absorbers of different diameters. One included length of a cover will be enough for 4-8 shock absorbers, depending on a length of one.

359,-

KJØP
This is the optional Assembled Wheelie Bar for all versions              of the Traxxas Revo except the 1/16 E-Revo. FEATURES: Nylon construction           Black in color INCLUDES: One Assembled Wheelie Bar REQUIRES: Installation on the Traxxas Revo Sjekk : Trx 5186 eller Trx 5186A

249,-

279,-

KJØP
-11%
Traxxas 5352A - Rebuild kit, slipper clutch (steel disc/ friction pads (3)/ spring (1)/ 2x9.8mm pin/ 5x8mm MW/ 5.0mm NL (1)/ 4.0mm NL (1))   The slipper clutch rebuild kit includes a new steel disc, friction pads (3), spring, pin, 5x8 washer, 4 mm locking nut, and 5 mm locking nut. Fits 5351 pressure plate and hub. Traxxas Slipper Clutch Rebuild Kit Revo/T-Maxx Traxxas Slipper Clutch Rebuild Kit Revo/T-Maxx

99,-

KJØP
This is the Steering Arm Mount for the Traxxas Revo. FEATURES: Black plastic construction           Standard and maximum throw steering stops INCLUDES: Steering arm mount       TRX 5343X                   Steering stop                 TRX 5343X REQUIRES: Installation on the Traxxas Revo

45,-

KJØP
This is the replacement Pivot Ball and Dust Cap Boot Set             for the Traxxas Revo, E-Revo and T-Maxx 3.3 vehicles. FEATURES: Nylon and Rubber Construction           Blue and Black in Color INCLUDES: Four Blue Rubber Pivot Ball Boots           Four Black Dust Boot Retainer           Four Blue Notched Dust Boot Retainer           Four Blue Rubber Boot Plugs           Four nylon Pivot Ball Retainers           Instruction sheet REQUIRES: Two packages needed to complete truck

89,-

99,-

KJØP
-10%
This is the Front Bulkhead for use on the                   Traxxas Summit Truck RTR. FEATURES: Nylon construction           Black in color INCLUDES: One Front Bulkhead (Left and Right Halves) REQUIRES: Installation on the vehicle

179,-

KJØP
This is the replacement Screw Pin Set for                  the Traxxas Nitro Revo Monster Truck. FEATURES: Metal Construction           Black in Color           Hex Head Design INCLUDES: Six 4mm x 15mm Black Metal Screw Pins. REQUIRES: Assembly onto Vehicle           2mm Hex Wrench. SPECS:    Length (Overall):   15.9mm (0.62")           Length (Threads):    6.0mm (0.23")           Diameter (Threads):  3.9mm (0.15")           Diameter (Shaft):    2.5mm (0.09")

49,-

KJØP
This is the 58 Tooth Spur Gear.       FEATURES: Nylon construction           Black in color           .8 Module pitch INCLUDES: One 58T 0.8 Pitch Spur Gear REQUIRES: Assembly onto vehicle

39,-

KJØP
This is the 54 Tooth Spur Gear. FEATURES: Nylon construction           Black in color           .8 Module pitch INCLUDES: One 54T 0.8 Pitch Spur Gear REQUIRES: Assembly onto vehicle  

39,-

KJØP
This is 50K wt Differential Oil for the Traxxas Revo                   but can be used in other vehicles as well. FEATURES: 50K weight oil INCLUDES: 1.75 oz (50cc) bottle of oil w/ 1-1/2" (38mm) pointed fill cap

89,-

Ikke på lager
Disse lagerene er samme størrelse som Tamiya 850 This is a 2 pack of Traxxas 5X8mm Ball Bearings. FEATURES: Metal bearing construction           Blue rubber dirt shields INCLUDES: (2) 5X8mm ball bearings    Part #5114 SPECS:    Inside diameter:      3/16"    (5mm)           Outside diameter:     5/16"    (8mm)           Width:                3/32"  (2.5mm)

49,-

KJØP
This is Silicone grease that is used throughout most all of the Traxxas kits, it can also be used in most any R/C greasing application. Includes: 1- tube of grease (approximately 1 oz.)

29,-

Ikke på lager
This is the Upper & Lower RIGHT FRONT Suspension Arm Set                          for the REVO from Traxxas. FEATURES: Durable black nylon construction INCLUDES: One upper RIGHT FRONT suspension arm           One lower RIGHT FRONT suspension arm

89,-

KJØP
This is 30K wt Differential Oil for the Traxxas Revo                   but can be used in other vehicles as well. FEATURES: 30K wt oil INCLUDES: A 1.75 oz  (50cc) bottle of oil w/ 1-1/2" pointed fill cap

99,-

KJØP
Erstatet av TRX 5452X   These are the Drive Shaft Joints for the Traxxas Revo and E-max FEATURES: Steel universal joint set INCLUDES: Four Steel Universal blocks           Four Steel Universal pins           Two black steel set pins           Four steel hinge pins           Four steel bearing pins           Eight 1.4mm e-clips REQUIRES: Installing on Traxxas Revo

This is the Center Half Shaft Set for the Traxxas E-Revo and E-Maxx FEATURES: Plastic construction, black in color INCLUDES: Center half shafts (three internal splined and two external splined) REQUIRES: Installation on the vehicle SPECS:    Diameter: 17.2mm (0.68")

75,-

KJØP
This is the Upper & Lower LEFT FRONT Suspension Arm Set                          for the REVO from Traxxas. FEATURES: Durable black nylon construction INCLUDES: One upper LEFT FRONT suspension arm           One lower LEFT FRONT suspension arm REQUIRES: Suspension pin set TRX 5321 to attach to bulkhead SPECS:                 UPPER                         LOWER           Length:      4.8" (122mm)                  6.1" (154mm)           Width:       2.5"  (63mm)                  2.8"  (72mm)

89,-

KJØP
This is the Carrier Differential for the Traxxas Revo and E-Maxx. FEATURES: Replaces worn diff carriers gaskets and spacers INCLUDES: Diff Carrier and Gaskets, TRX 5381.           Steel Spider Gear Braces (not used with Revo)           Instruction sheet REQUIRES: Disassembly of differential, installing new parts and refilling with             modeler's choice of diff lube           10K TRX 5135                50K  TRX 5137           30K TRX 5136   stock weight       Complete set TRX 5136X

49,-

KJØP
This is the optional .8 Metric Pitch 62 Tooth Spur Gear                            for the Traxxas E-Maxx. FEATURES: Nylon construction, black in color           .8 metric pitch INCLUDES: One 62T 0.8 metric pitch spur gear REQUIRES: Installation on the vehicle SPECS:    Diameter: 2" (51mm)           Thickness: .23" (6mm)

39,-

KJØP
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png