Hopp til innhold

Traxxas 5136 Differential Oil 30K Weight Revo

Art.nr: TRX 5136

99,-

Traxxas

Traxxas

På lager: 1

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

This is 30K wt Differential Oil for the Traxxas Revo
                  but can be used in other vehicles as well.


FEATURES: 30K wt oil


INCLUDES: A 1.75 oz  (50cc) bottle of oil w/ 1-1/2" pointed fill cap

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Relaterte produkter

 

Art.nr: TRX 5136X
Copied
This is the Diff Oil Kit for the Revo by Traxxas. FEATURES: Three bottles of oil (10K,30K,50K weights). INCLUDES: Three 2oz (59ml) bottles of oil           Three pour spouts

249,-

KJØP

Kunder kjøpte også

Traxxas Premium Shock Oil Set 60ml including Rack (7 oils) New from Traxxas is a complete line of premium silicone shock oil. Available in seven steps of viscosity, this 100% pure silicone oil allows precise vehicle suspension tuning for maximum performance, no matter where you drive. The precision-pour, twist-nozzle cap makes it quick and easy to fill shock bodies, without all the mess. cSt viscosity specification ensures consistent performance with every bottle. Features: The best way to organize the full lineup of oil from Traxxas! Premium bearing spinner provides smooth movement Holds 7 bottles to organize the full set of oils Includes seven precise viscosities ranging from 200cSt to 1000cSt (20wt to 80wt) 100% silicone oil for maximum consistency Precision-pour, twist-nozzle cap Specs: Viscosity: 20-80WT (200-1000cSt) Bottle sizes: 60ml

699,-

859,-

KJØP
-19%
This is the optional Variable Damping Kit for GTR Shocks found on the          Traxxas Revo 3.3 RTR and the Traxxas E-Revo RTR FEATURES: Nylon construction           Enhances tuning ability of suspension by controlling compression and             rebound rate of shocks INCLUDES: One Variable Damping Kit for GTR Shocks:               #1, #2 and #3 pistons and stainless steel valves           Instruction sheet REQUIRES: Installation on the GTR Shocks

89,-

KJØP
Louise LT3389SM - ST-PIONEER Soft Mini Maxx & Mini XRT (12mm Hex 0" & 1/2" Offset) (2) Fits Traxxas Mini Maxx Traxxas Mini XRT Specs Scale: Mini Tire Diameter: 102.1mm Tire Width: 52mm Wheel Off-set: Removable 0" & 1/2" OFFSET HEX 12mm Surface: Pavement, Loose Dry, Loose wet, Hard packed, Grass Tire compound: Soft

399,-

439,-

KJØP
-9%
Traxxas 10791 - Toe links, front (molded composite) (2)/ hollow balls (4) (71mm center to center) (for use with #10790 Mini Maxx® WideMaxx® suspension kit)

79,-

KJØP
Denne erstatter Traxxas 10778 Traxxas 10778X - Ring gear, differential, 47-tooth/ pinion gear, differential, 12-tooth (planetary) (front)

149,-

169,-

KJØP
-12%
Traxxas 10757X - Driveshaft, center, aluminum (requires #10762 with either #10758 or 10760)   This aluminum driveshaft is shorter than the standard driveshaft to accommodate the optional 10758 slipper clutch or 10760 and 10760R center differentials. When using the aluminum driveshaft, you must also use differential pinion gear 10762.

99,-

109,-

KJØP
-9%
Traxxas 10737 - Skid plate, front (1), rear (1)

109,-

KJØP
Gear, 22-T pinion (32-p), heavy duty (machined, hardened steel)/ set screw

79,-

89,-

KJØP
-11%
This is the Traxxas replacement TRX3769 Spring Pre-Load Spacers that comes with the Stampede and Rustler trucks and many others Traxxas cars along with the Black Long Shocks. and Black XX-Long shocks. FEATURES Made of a black plastic/nylon material. Used to help pre-load the shock springs. This is installed on the top of the shock springs. Enough for 1 pair of shocks. INCLUDES 2 spacers 1mm thick 2 "" 2mm "" 2 "" 3mm "" 2 "" 4mm "" , COMMENTS Looks like a letter "C" Also fits shocks with a 13.5mm outside diameter body.

59,-

KJØP
 These are the Wheelie Bar Wheels for the Traxxas 3.3 T-Maxx. FEATURES: Constructed of hard plastic           Axles constructed of steel INCLUDES: Four wheels and two axles REQUIRES: Installing on wheelie bar SPECS:    Thickness: 0.39" (10mm)           Diameter:  1.02" (26.1mm)

49,-

KJØP
These are the Traxxas Spring Retainers for Traxxas Shocks.        This set contains the spring retainers that hold the springs in     place over the shock body and the piston heads that control the amount                      of oil flow in the shock cylinder. FEATURES: Constructed of molded plastic.           Contains enough parts for two shocks.           Fits the shocks on most Traxxas nitro and electric powered vehicles.           Two hole piston head for greater dampening or three hole piston head             for softer spring performance. INCLUDES: One Traxxas Spring Retainer Set with:             Two upper and two lower spring retainers             Two 2 hole piston head covers             Two 3 hole piston head covers REQUIRES: Disassembly of shock to install parts.

39,-

KJØP
Traxxas 7880 - Pro-Built X-Maxx 8s Front Differential Differential, front, complete (fits X-Maxx® 8s) As you probably know, Traxxas makes high-quality replacement parts for every vehicle that we sell. This makes it easy to keep your model running in peak form. For even faster, more convenient repairs and maintenance, Traxxas now offers Pro-BUILT™ components for the best-selling 2WD and 4X4 models, including E-Revo, Bandit, Rustler, Stampede, Slash, and Unlimited Desert Racer. Pro-BUILT components allow you to replace your model’s differential or transmission as a complete unit, no assembly required. Each Pro-BUILT component arrives ready-to-install, precisely assembled to Traxxas’ exacting standards and lubricated with factory-certified grease or oil. Pro-BUILT components save time and make it easy to restore like-new performance with factory-fresh parts in the driveline, where precision counts most. Pro-BUILT components ensure your model delivers all the performance, durability, and fun you expect from Traxxas.

699,-

799,-

KJØP
-13%
 These are Shock Caps and Bottoms for Traxxas kits.                 These seal the shock containing the shock oil. FEATURES: Nylon construction INCLUDES: Two nylon shock cap (tops) Two nylon shock cap (bottoms) REQUIRES: Other shock components SPECS: Diameter Tops Bottoms 16MM 13MM COMMENTS: These fit the N/E 4-tec, N/E Stampede, and T/E-Maxx

39,-

KJØP
Høykvakitets Silicone demper olje med viskositet 550. En olje som gjør at o-ringer ikke går tørre. Meget bra kvalitet! 60ml flaske.

79,-

KJØP
Features: Viscosity 10000CPS / 511WT. Optimum for differential and shock absorbers. The silicon oils from absima are extremely heat resistant and available in all viscosities. Viscosities from 100CPS to 900CPS are optimal for shock absorbers and 1000 to 1000000CPS for differential gears.  1 bottle /60ml

109,-

KJØP
Gear, 15-T pinion (machined) (1.0 metric pitch) (fits 5mm shaft)/ set screw (compatible with steel spur gears)

129,-

139,-

KJØP
-7%
This is the Rear Bulkhead for the Traxxas Revo. FEATURES: Black plastic construction           Rocker shafts preinstalled INCLUDES: Rear bulkhead halves Part #5329           (2) rocker shafts     Part #5354           (4) 4X14mm button head screws REQUIRES: Installation on the Traxxas Revo  

199,-

219,-

KJØP
-9%
This is the Chassis for the Traxxas E-Revo 4WD Monster Truck RTR (TRAC07**). FEATURES: Nylon construction           Installed foam pads           Grey in color           Also fits the Traxxas E-Revo Brushless and Traxxas Summit with minor             modification INCLUDES: One Chassis with foam pads           Instruction sheet for use with E-Revo Brushless and Summit REQUIRES: Installation of all other components SPECS:    Length: 434mm (17")           Width: 150mm (5.9")           Height: 38mm (1.5")

329,-

KJØP
This is the 14 Tooth 1.0 Metric Pitch Pinion Gear                 for the Traxxas XO-1 On-Road Car FEATURES: Hardened steel construction           Fits 5mm diameter motor shafts INCLUDES: 14 Tooth 1.0 Metric Pitch Pinion Gear

49,-

KJØP
  Skidplate Transmission Black

119,-

139,-

KJØP
-14%
Spacer, battery compartment (2)/ foam blocks (4)/ foam pad (2)  

95,-

KJØP
Gear, 16-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (compatible with steel spur gears)   16-tooth pinion gear. Fits 5mm shaft, 1.0 metric pitch. Hardened steel for use with steel spur gears. Includes set screw.

49,-

KJØP
Traxxas 6444 Spur gear, 54-tooth (machined, hardened steel) (wide face, 1.0 metric pitch) 54-tooth spur gear (1.0 metric pitch) is machined from hardened steel with extra-wide steel teeth for ultimate power handling and durability. Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual for more information on recommended gearing options for your specific model. Accessory part for these models: E-Revo® VXL Brushless Maxx® X-Maxx® XO-1® XRT™

429,-

469,-

KJØP
-9%
Traxxas 6494R Gear, 20-T pinion (machined, hardened steel) (1.0 metric pitch) (fits 5mm shaft)/ set screw

149,-

159,-

KJØP
-6%
  Traxxas 13-Piece Tool Kit with Carrying Case       The Perfect Companion The new Traxxas Tool Kit includes virtually every tool required to maintain Traxxas vehicles and stores them in a handy carrying case. A comfortable ratcheting handle allows the 11 included bits to telescope for those hard-to-reach screws. The kit includes nut drivers, hex drivers, standard and Phillips head screwdrivers and a wrench. Tool Kit Features: Comfortable ratcheting handle with clear directional markings Telescoping bits provide easy access to virtually any screw Five nut drivers: 4, 5, 5.5, 7 & 8mm Six hex drivers: 1.5, 2, 2.5, 3, 3.5 & 4mm Three Phillips head screwdrivers: Size 00, 0 & 1 Three flat-head screwdrivers: Size 2, 3 & 4 Open-ended wrench: 4 & 8mm Tough zippered carrying case

389,-

429,-

KJØP
-9%
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png