Hopp til innhold

Traxxas 3769 Spring Pre Load Spacers

Art.nr: TRX 3769

59,-

Traxxas

Traxxas

På lager: 5

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

This is the Traxxas replacement TRX3769 Spring Pre-Load Spacers
that comes with the Stampede and Rustler trucks and many others Traxxas cars along with the
Black Long Shocks. and Black XX-Long shocks.

FEATURES

Made of a black plastic/nylon material.
Used to help pre-load the shock springs.
This is installed on the top of the shock springs.
Enough for 1 pair of shocks.

INCLUDES

2 spacers 1mm thick
2 "" 2mm ""
2 "" 3mm ""
2 "" 4mm ""
,

COMMENTS

Looks like a letter "C"
Also fits shocks with a 13.5mm outside diameter body.

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

Wheel hubs, 12mm hex (steel), extreme heavy duty (4)/ 2x9.8mm pin (4) (for use with #9080 upgrade kit and 6mm axles) Set of four replacement 12 mm steel wheel hubs for the 9080-series Extreme Heavy Duty Upgrade Kit. Includes 2x9.8 mm pins (4). Wheel hubs are for use with the 9080 upgrade kit only and will not fit standard axles.

129,-

139,-

KJØP
-7%
Traxxas Heat sink - fits #3351R (Velineon 3500) and #3461 (Velineon 540XL) brushless motors The 3458 heat sink fits Velineon brushless motors #3351R and #3461 when installed in 4X4 vehicles. (Does not fit 2WD configurations). For more information on installing the heatsink and fan shroud, read the following article.

129,-

KJØP
Cooling Fan Kit (Velineon 3500/ 540XL) (Need Heat Sink #3458

299,-

329,-

KJØP
-9%
Body clip (mounting clip), angled, 90-degrees (black) (10)

39,-

KJØP
This is the Center Differential Gear Set for use on the          1/10 scale Traxxas Slash 4x4 Ultimate and Platinum Editions. FEATURES: Steel construction           Replaces worn or damaged center differential gears INCLUDES: Two Output Gears           Two Spider Gears           One Spider Gear Shaft REQUIRES: Diassembly of differential

189,-

KJØP
This is the Diff Oil Kit for the Revo by Traxxas. FEATURES: Three bottles of oil (10K,30K,50K weights). INCLUDES: Three 2oz (59ml) bottles of oil           Three pour spouts

249,-

KJØP
Traxxas 3655-BLK Suspension arms, black, front/rear (left & right), heavy duty (2)

149,-

159,-

KJØP
-6%
Traxxas 5000mAh 11.1v 3-Cell 25C Short LiPo Battery TRAXXAS CERTIFIED LIPO POWER! Traxxas Certified iD-Equipped LiPo batteries are engineered to provide the punch and on-demand power for reaching the top speeds that Traxxas models are built to achieve. Traxxas Power Cell iD-Equipped LiPo batteries are engineered specifically to fit Traxxas models and maximize their full performance potential. Only Traxxas gives you more of what you want most: simple installation, a great price, and the most speed and run time available. Specs: Type: LiPo Total Capacity: 5000 mAh Voltage: 11.1 V (3S) C Rating: 25 Length: 135 mm Height: 28.5 mm Width: 44 mm Weight: 354 g

995,-

1.095,-

KJØP
-9%
This is the Traxxas Link TQi Wireless Module. FEATURES For use with the Traxxas Link app and TQi radio system Compatible with iPhone (4S or later) iPad (3rd gen and later) iPod touch (5th gen and later) iPad mini Allows driver to view real time telemetry with optional sensors (sensors not included) Compatible with Android 4.4 and up or Apple iOS 4.3 and later platforms INCLUDES Traxxas Link TQi Wireless Module 1.5mm Hex Wrench 1.5x5mm Hex Head Screw SPECIFICATIONS Dimensions: 1.2 x 1.8 x 0.42" (31.5 x 46.8 x 10.8mm) Weight: 0.26oz (7.5g)

479,-

529,-

KJØP
-9%
This is 30K wt Differential Oil for the Traxxas Revo                   but can be used in other vehicles as well. FEATURES: 30K wt oil INCLUDES: A 1.75 oz  (50cc) bottle of oil w/ 1-1/2" pointed fill cap

99,-

KJØP
 These are the Wheelie Bar Wheels for the Traxxas 3.3 T-Maxx. FEATURES: Constructed of hard plastic           Axles constructed of steel INCLUDES: Four wheels and two axles REQUIRES: Installing on wheelie bar SPECS:    Thickness: 0.39" (10mm)           Diameter:  1.02" (26.1mm)

49,-

KJØP
Gear, 22-T pinion (32-p), heavy duty (machined, hardened steel)/ set screw

79,-

89,-

KJØP
-11%
Traxxas 10737 - Skid plate, front (1), rear (1)

109,-

KJØP
Denne erstatter Traxxas 10778 Traxxas 10778X - Ring gear, differential, 47-tooth/ pinion gear, differential, 12-tooth (planetary) (front)

149,-

169,-

KJØP
-12%
Traxxas 10791 - Toe links, front (molded composite) (2)/ hollow balls (4) (71mm center to center) (for use with #10790 Mini Maxx® WideMaxx® suspension kit)

79,-

KJØP
Louise LT3389SM - ST-PIONEER Soft Mini Maxx & Mini XRT (12mm Hex 0" & 1/2" Offset) (2) Fits Traxxas Mini Maxx Traxxas Mini XRT Specs Scale: Mini Tire Diameter: 102.1mm Tire Width: 52mm Wheel Off-set: Removable 0" & 1/2" OFFSET HEX 12mm Surface: Pavement, Loose Dry, Loose wet, Hard packed, Grass Tire compound: Soft

399,-

439,-

KJØP
-9%
Traxxas 10757X - Driveshaft, center, aluminum (requires #10762 with either #10758 or 10760)   This aluminum driveshaft is shorter than the standard driveshaft to accommodate the optional 10758 slipper clutch or 10760 and 10760R center differentials. When using the aluminum driveshaft, you must also use differential pinion gear 10762.

99,-

109,-

KJØP
-9%
  Traxxas Ultra Premium Tire Glue Ultra Premium Tire Glue (#6468) with packageOnly one tire glue is certified for use with the 100+mph XO-1: Traxxas Ultra Premium Tire Glue. The XO-1 relies on a high-strength tire bond to withstand incredible centrifugal forces at speeds in excess of 100mph. No other glue endures such high loads, which makes Traxxas Ultra Premium Tire Glue the ultimate adhesive for any tire and rim combination (and any other application that requires a high-strength bond).  To preserve the maximum bonding power of Traxxas Ultra Premium Tire Glue, its bottle is specially designed to maintain a tight seal and prevent clogging. The bottle and nozzle are made of glue-resistant material, and a pin integrated into the tightly-fitting screw-on cap assures glue won't clog the bottle tip. The tip's fine opening allows precise glue application every time you reach for Traxxas Ultra Premium Tire Glue. Traxxas Ultra Premium Tire Glue is custom-blended exclusively for Traxxas. There simply is no better bond for high-speed, high-power vehicles. Traxxas Ultra Premium Tire Glue Features:   The only glue Traxxas Certified for the 100+mph XO-1 Highest-quality cyanoacrylate (CA) glue available Fine tip opening for precise glue application Tightly-fitting cap with sealing pin Glue-resistant bottle and tip material Includes two precision application tips Content 20gr    

139,-

159,-

KJØP
-13%
This is the Cover Gear/Wire Retainer                       For the Traxxas 1/10 Rally VXL FEATURES: Made of black plastic. INCLUDES: One cover gear           One wire retainer

39,-

KJØP
Driveshaft, center, 6061-T6 aluminum (red-anodized) (189mm)

119,-

KJØP
Traxxas 6730R Chassis Brace Kit Alu Red Increase chassis stiffness and impact-handling with the heavy-duty (HD) aluminum chassis brace designed for Slash 4X4 (equipped with low-CG chassis) and Rustler 4X4 models. Made from thick extruded aluminum, the oval-shaped brace increases torsional rigidity and stiffens the chassis to reduce flex. Brilliantly anodized in four high-impact colors, the HD chassis brace provides structural reinforcement for high loads and hard landings. Whether you’re sending it at the skate park, hitting the race track, or launching from a ramp, the heavy-duty chassis brace is built for extreme punishment. Chassis Brace Features: Thick extruded aluminum construction Four bright anodized colors Reduces chassis flex on hard landings Oval shape for increased torsional rigidity Fits Slash 4X4 low-CG models Fits all Rustler 4X4 models

299,-

KJØP
Traxxas 6788 - Pro-Built Front 4x4 Transmission/Differential Differential, front (complete with pinion gear and differential plastics) (fits 1/10-scale 4X4 Slash, Stampede®, Rustler®, Rally) As you probably know, Traxxas makes high-quality replacement parts for every vehicle that we sell. This makes it easy to keep your model running in peak form. For even faster, more convenient repairs and maintenance, Traxxas now offers Pro-BUILT™ components for the best-selling 2WD and 4X4 models, including E-Revo, Bandit, Rustler, Stampede, Slash, and Unlimited Desert Racer. Pro-BUILT components allow you to replace your model’s differential or transmission as a complete unit, no assembly required. Each Pro-BUILT component arrives ready-to-install, precisely assembled to Traxxas’ exacting standards and lubricated with factory-certified grease or oil. Pro-BUILT components save time and make it easy to restore like-new performance with factory-fresh parts in the driveline, where precision counts most. Pro-BUILT components ensure your model delivers all the performance, durability, and fun you expect from Traxxas. Fits: Ford Fiesta® ST Rally Hoss™ 4X4 VXL Rustler® 4X4 VXL Slash 4X4 Ultimate Slash 4X4 VXL Stampede® 4X4 VXL

439,-

469,-

KJØP
-6%
Traxxas Rustler 4X4 LED Light Kit The Traxxas Rustler 4X4 takes stadium truck performance to new heights and now there’s an LED light kit to extend the fun after sunset. High-intensity LEDs come pre-installed and integrated in a new front bumper and roof skid made from our toughest composite material. The two forward facing bright-white LED light bars and rear red light bar are regulated by the included chassis-mounted power supply. Built Traxxas Tough and fully waterproof, the Rustler 4X4 LED light kit adds a fun new dimension to the Rustler 4X4 experience. Features: Efficient, high-intensity LED lighting Front bumper with integrated LED lights Roof skid with integrated front (white) and rear (red) light bars Regulated power supply for stable lighting performance Easy installation with included power tap connector Includes mounting hardware

579,-

599,-

KJØP
-3%
This is a Pair of Stock Replacement Front Axles for the Rustler and Stampede.              These are located in the front steering blocks. FEATURES: Steel construction           Natural color INCLUDES: Two front axles REQUIRES: Nothing.  These are direct replacement parts. SPECS:    Length: 32mm (1.26")           Diameter: 5mm COMMENTS: These will not work for the nitro versions.  For that axle, use TRX 2536,         

39,-

KJØP
This is a set of the Traxxas telescoping drive shafts (equivalent of dogbones or swing shafts). These are for use on Traxxas trucks. Features: White plastic parts Includes:          (6) sets of drive shafts  (each set consists of an inside shaft wich              slides in the outside shaft). Dimensions: 2.5" long when fully compressed.

119,-

KJØP
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png