Traxxas

Traxxas 2064 Servo Gear for servo TRX 2065

Art.nr: TRX 2064

59,-

Traxxas

Traxxas

På lager: 2

Du vil motta en e-post så snart produktet er på lager!

En feil har oppstått. Prøv igjen

Informasjon
Produsent

Informasjon

-Disse passer til Summit 1/10 sine små TRX 2065 servoer.

This is the replacement Servo Gear Set for the Traxxas
2065 Waterproof Sub-Micro Servo -TRX 2065
The 2065 servo is used in the E-Maxx Monster Truck Series.

FEATURES: Nylon construction, white in color
Replaces worn or damaged servo gears

INCLUDES: One Output Gear
          One Top Reduction Gear
          One Offset Reduction Gear
          One Center Reduction Gear
          One Bottom Reduction Gear

REQUIRES: Installation

Produsent

Traxxas

Traxxas

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

Hovedbilde Traxxas 5340X Exhaust Header Spring Mount TRX 2.5/3.3

Traxxas 5340X Exhaust Header Spring Mount TRX 2.5/3.3

Exhaust Header Spring Mount TRX 2.5/3.3 Header, exhaust (tubular aluminum, silver-anodized)/ spring mount (TRX® 2.5, 2.5R, 3.3)

219,-

239,-

-8%

Hovedbilde Traxxas 5254 Header Spring TRX 2.5/3.3

Traxxas 5254 Header Spring TRX 2.5/3.3

Header Spring TRX 2.5/3.3 Header spring/ gaskets (TRX® 2.5, 2.5R, 3.3) Header spring and gaskets for the TRX 2.5, 2.5R, and 3.3 racing engines.

39,-

Hovedbilde Traxxas 5325R Throttle Servo Mount

Traxxas 5325R Throttle Servo Mount

Throttle Servo Mount Servo mount, throttle/ 4x10mm BCS (2)

49,-

Hovedbilde Traxxas 5324X Receiver and Battery Box Multi Revo 3.3/ ...

Traxxas 5324X Receiver and Battery Box Multi Revo 3.3/ ...

Receiver and Battery Box Multi Revo 3.3/ Slayer Pro Box, receiver & battery (2)/ cover/ foam pad & adhesive/ charge jack plug (rubber)/ 4x8mm BCS (1)/ 4x12mm BCS (2) (contains both boxes to accommodate either AA battery holder or RX flat pack) Combine this sleek receiver box with the 5394X forward-only kit to trim weight from your Revo for maximum track performance. The compact box features a tight-fitting, contamination-resistant cover, and an integrated on-off switch mount. The box can accomodate 4 AA cells, or a 5-cell rechargreable NiMH flat-pack. There's even a built-in personal transponder mount for extra convenience on race day. When converting to forward only, part 5325R completes the sleek race look and by replacing the standard servo box with a

109,-

Hovedbilde Traxxas 5417 Brake Kit Rear Dual Disc (Requiers Center ...

Traxxas 5417 Brake Kit Rear Dual Disc (Requiers Center ...

Brake Kit Rear Dual Disc (Requiers Center Diff #5414) Revo Brake kit, rear (dual-disc Revo®) (Requires center differential part 5414 and gearbox housing 5391X) Combine the optional center differential with the Revo dual rear brake kit to allow precise tuning of the front to rear brake bias. It's factory engineered to match Revo's top level performance and durability. (Requires center differential part 5414 and gearbox housing #5391X)

Hovedbilde Traxxas 5414 Center Differential Kit Revo

Traxxas 5414 Center Differential Kit Revo

This is the Traxxas Center Differential Kit for the Revo. FEATURES Direct drop-in for the Revo 3.3, standard chassis Revos require the Accessory Rear Output Shaft Transfers power to the front and rear differentials independently Sealed center differential is adjustable using various oil viscosities Comes fully assembled with 100K oil INCLUDES Traxxas Center Differential Kit for the Revo with forward-only conversion REQUIREMENTS Installation COMMENTS Designed for use with rear brake kit

465,-

Hovedbilde Traxxas 4142X Flywheel 40mm Aluminum TRX 2.5R

Traxxas 4142X Flywheel 40mm Aluminum TRX 2.5R

This is an optional Large Knurled Flywheel for use with Starter Boxes. FEATURES Large knurles to be gripped by rubber starter wheels Two pin aluminum construction Vent holes drilled to keep clutch shoes cooler INCLUDES One 40mm flywheel REQUIREMENTS Installation onto Traxxas nitro vehicle. SPECIFICATIONS Diameter: 1.6" (40mm) COMMENTS This flywheel fits onto a tapered collet.

125,-

Hovedbilde Traxxas 5353R Wheel Hubs Splined 17mm Red-Anodized (4)

Traxxas 5353R Wheel Hubs Splined 17mm Red-Anodized (4)

These are the optional 17mm Splined Wheel Hubs. FEATURES: Aluminum construction, red anodized in color Converts wheel hubs from 14mm to 17mm and allows the use of wheels with 17mm hex INCLUDES: Four aluminum splined Wheel Hubs and Nuts, four 4x13mm Screw Pins REQUIRES: Installation on the vehicle

289,-

299,-

-3%

Hovedbilde Traxxas 5446 Wing Black Revo.

Traxxas 5446 Wing Black Revo.

This is the Black Wing for the Traxxas Revo. This part attaches to the rear of the body. FEATURES: Plastic construction, black in color INCLUDES: One rear wing with decals REQUIRES: Installation on the Revo. SPECS: Length: 8" (203.2mm) Width: 3" (76.2mm)

189,-

Hovedbilde Traxxas 3741X Aluminum Turnbuckle Set Red ...

Hovedbilde Traxxas 3741X Aluminum Turnbuckle Set Red ...

Traxxas 3741X Aluminum Turnbuckle Set Red ...

This is the Aluminum Turnbuckle set for the Traxxas, Rustler and Stampede. FEATURES: Anodized aluminum construction, red in color Black nylon ball ends INCLUDES: Two 39mm front camber links (available seperately TRX 3737) Two 49mm rear camber links (available seperately TRX 3738) Links are assembled with rod ends and hollow balls One red 5mm aluminum wrench REQUIRES: Installation onto vehicle

269,-

Hovedbilde Traxxas 5318X Aluminum Pushrod Red Revo (2)

Traxxas 5318X Aluminum Pushrod Red Revo (2)

These are the (optional) Red Aluminum Pushrods for the Rocker Arms for the REVO from Traxxas These go between the Rocker Arms and the Lower Suspension Arms **Use with long travel or Progressive-1 Rocker Arm Set, TRX 5357.** FEATURES: Red Aluminum construction INCLUDES: Two Pushrods w/pre-installed rod ends and balls REQUIRES: Installing on the vehicle SPECS: Length: 5.4" (137mm) end to end including rod ends Diameter: 0.20" (5mm) COMMENTS: For rod ends only use TRX 5347

155,-

Hovedbilde Traxxas 5338R Aluminum Toe Links Red(2)

Hovedbilde Traxxas 5338R Aluminum Toe Links Red(2)

Traxxas 5338R Aluminum Toe Links Red(2)

These are the optional Lightweight 128mm Toe Links with Rod Ends for the Traxxas Revo Models. FEATURES: 30% lighter than stock steel toe links 4 times stiffer and more than double the strength of aftermarket titanium Unique hollow tube design using 7075-T6 aluminum Anodized red in color INCLUDES: Two Toe Links 4 Front and Rear Rod Ends One 7mm Wrench REQUIRES: Installing on vehicle SPECS: Length: 5.04" (128mm) Diameter: 0.45" (11.5mm)

309,-

Hovedbilde Traxxas 4962 Shocks Big Bore T-Maxx (8)

Traxxas 4962 Shocks Big Bore T-Maxx (8)

This is the Optional Big Bore Shock Set for the Traxxas T-Maxx and E-Maxx Trucks. These replace the plastic shocks that come stock with the kit. FEATURES: Strong Alloy construction Teflon coated. Anodized gun metal grey with red springs Completely assembled Comes in a foam tray covered with a clear plastic box on a hangable header card. Convenient 8-pack. INCLUDES: Eight fully assembled alloy shocks with red medium springs Mounting hardware Two bottles of shock oil (30-weight, per Traxxas) REQUIRES: Filling shocks with shock oil and assembling onto the model. SPECS: Length: 4-1/8" (not compressed) Diameter: 3/4" COMMENTS: This will work on both the T-Maxx and E-Maxx with no modifications.

1.149,-

1.199,-

-4%

Hovedbilde Traxxas 7575R LaTrax Motor, 370 (assembled with bullet ...

Traxxas 7575R LaTrax Motor, 370 (assembled with bullet ...

Motor, 370 (assembled with bullet connectors) Replacement part for these models: 1/18 LaTrax® Desert Prerunner 1/18 LaTrax® Rally 1/18 LaTrax® Teton®

119,-

Hovedbilde Traxxas 7611 Body Teton Clear/Decal Sheet

Traxxas 7611 Body Teton Clear/Decal Sheet

This is the Clear Body for the LaTrax Teton Monster Truck from Traxxas. FEATURES Clear molded polycarbonate construction Trimmed out wheel arches and body post holes INCLUDES Latrax Teton Clear Body with Decal Sheet REQUIREMENTS Polycarbonate safe spray or brush-on paint SPECIFICATIONS Length: 9.4" (239mm) Width: 3.6" (91mm) Height: 3.3" (84mm) (B5)

199,-

Hovedbilde Tamiya 58719 BBX Buggy BB-01 Kit

Hovedbilde Tamiya 58719 BBX Buggy BB-01 Kit

Tamiya 58719 BBX Buggy BB-01 Kit

Tamiya’s designers have taken inspiration from its back catalog of iconic 2WD off-road buggies to bring fans of radio control the ALL-NEW BBX! This 1/10 R/C 2WD off-road buggy model features a combination of classic design and modern performance. Its brand-new chassis, reminiscent of 1980’s sand rail dune buggies, is a hybrid monocoque-roll cage and employs rear trailing arm suspension inspired by full-size UTV’s. The new body is designed by famed Japanese artist Atsushi Arino and utilizes a classic 1980’s inspired livery with retro wheels and tires to match! Key Features: • The classically designed 0.7mm thick polycarbonate body is split into three sections to recreate the tapered lower shape of the actual dune buggy. • NEW: Newly designed 2WD chassis is based on the one-piece monocoque frame and roll cage to allow use of realistic bodies. • The BB-01 chassis employs new front double wishbone suspension with A-shaped arms and rear trailing arm suspension with long trailing arms which are inspired by UTVs and give impressive performance. • The 2WD chassis with rear motor features rear-position, inspired by the same layout of the actual vehicles of the era and allows great rear traction. • The four-wheel double wishbone suspension system uses CVA oil front/rear aluminum aeration dampers for impressive performance and classic look. • Transmission uses the TA06 rear oil-filled gear differential which allows the use of many existing Grade-Up parts. • Features full ball bearings and universal drive shafts. • Rear roll cage can be removed by detaching screws, which ensures ease of maintenance around motor. • NEW: New metal-plated bead lock type wheels are paired with NEW large-diameter tires. • Includes driver figure and light cases for extra realism, and 5th spare tire mount adapter. (Spare tire may be purchased separately for added realism) • Requires 2-channel radio, low profile steering servo, 540 motor, ESC, 7.2-7.4volt battery with compatible charger and Tamiya PS paint to complete. Option parts fra Yeah Racing. Link: Trykk her! Link: Trykk her! Link: Trykk her! Link: Trykk her! Link: Trykk her! Link: Trykk her! Link: Trykk her! Link: Trykk her! Link: Trykk her! Link: Trykk her! Link: Trykk her! Link: Trykk her! Link: Trykk her! Link: Trykk her! About Tamiya 1/10 Buggy BBX (BB-01 Chassis) Announced at Nuremberg International Toy Fair on Feb 2023. Tamiya’s designers have taken inspiration from its back catalog of iconic 2WD off-road buggies to bring fans of radio control the ALL-NEW BBX! This 1/10 R/C 2WD off-road buggy model features a combination of classic design and modern performance. Its brand-new chassis, reminiscent of 1980’s sand rail dune buggies, is a hybrid monocoque-roll cage and employs rear trailing arm suspension inspired by full-size UTV’s. The new body is designed by famed Japanese artist Atsushi Arino and utilizes a classic 1980’s inspired livery with retro wheels and tires to match! 1/10 R/C assembly kit. Length: 414mm, height: 136mm, width: 233mm. Wheelbase: 283mm. The classically designed 0.7mm thick polycarbonate body is split into three sections to recreate the tapered lower shape of the actual dune buggy. ewly designed 2WD chassis is based on the one-piece monocoque frame and roll cage to allow use of realistic bodies. The BB-01 chassis employs new front double wishbone suspension with A-shaped arms and rear trailing arm suspension with long trailing arms which are inspired by UTVs and give impressive performance. The 2WD chassis with rear motor features rear-position, inspired by the same layout of the actual vehicles of the era and allows great rear traction. The four-wheel double wishbone suspension system uses CVA oil front/rear aluminum aeration dampers for impressive performance and classic look. Transmission uses the TA06 rear oil-filled gear differential which allows the use of many existing Grade-Up parts. Features full ball bearings and universal drive shafts. Rear roll cage can be removed by detaching screws, which ensures ease of maintenance around motor. New metal-plated bead lock type wheels are paired with NEW large-diameter tires. Includes driver figure and light cases for extra realism, and 5th spare tire mount adapter. Requires 2-channel radio, steering servo, 540 motor, ESC, 7.2-7.4volt battery with compatible charger and Tamiya PS paint to complete.

3.895,-

4.395,-

-11%

Hovedbilde Power HD 6001MG Analog 7kg

Hovedbilde Power HD 6001MG Analog 7kg

Power HD 6001MG Analog 7kg

Power HD 6001MG Analog 7kg Metallgir. Kan brukes i både fly og bil. Weight: 56g Dimension: 40.7x20.5x39.5mm Supply voltage: 6.0V Stall Torque: 7kg.cm no load running Speed: 0.14sec/60° Storage Temperature: -20?~55? Dead band width: ?4us

239,-

249,-

-4%

Hovedbilde Kyosho 82132B SYNCRO KT331P TX + KR331 RX

Kyosho 82132B SYNCRO KT331P TX + KR331 RX

82132B Syncro KT-331P TX/KR-331 RX Excellent control and user-friendly 2.4GHz stability! Features a failsafe system in case of the unexpected! Kyosho's unique 2.4GHz Syncro KT331P/KR-331 transmitter and receiver incorporate additional functions and are designed for easy operation. The stylish form of the transmitter features a built-in antenna and an ergonomic design for comfortable switch positioning and a large, high visibility LCD display. The Syncro is also energy efficient and uses only four AA-size alkaline batteries. Its precision balance and lightweight are ideal for endurance racing and help maintain concentration without becoming fatigued and also make it easy to activate required functions and settings. From fun-running to the intensity of serious racing, the new generation Syncro 2.4GHz will deliver a greater appreciation of your R/C model's performance. Additional steering function Additional throttle function ABS brake function. 3rd-channel additional function <3-position switch / 0-120% offset for each position> functions compatible with all channels. FHSS system (frequency hopping system) 2.4GHz system. Easy to navigate single dial control. < Set Contents > Syncro KT331 transmitter Syncro KR331 Receiver 4 cell battery holder Receiver switch Technical data Channels KT331P:3ch/KR331:3ch Receiver size L34 x W26 x H13mm Receiver weight 7.7g Receiver voltage 4.8V - 6.0V

749,-

849,-

-12%

Hovedbilde Traxxas 2842X Battery Li-Po 2S 7,4V 5000mAh 25C ...

Traxxas 2842X Battery Li-Po 2S 7,4V 5000mAh 25C ...

Traxxas 5000mAh 7.4v 2-Cell 25C Short LiPo Battery TRAXXAS CERTIFIED LIPO POWER! Traxxas Certified iD-Equipped LiPo batteries are engineered to provide the punch and on-demand power for reaching the top speeds that Traxxas models are built to achieve. Traxxas Power Cell iD-Equipped LiPo batteries are engineered specifically to fit Traxxas models and maximize their full performance potential. Only Traxxas gives you more of what you want most: simple installation, a great price, and the most speed and run time available. Specs: Type: LiPo Total Capacity: 5000 mAh Voltage: 7.4 V (2S) C Rating: 25 Length: 137 mm Height: 24 mm Width: 43 mm Weight: 280 g

649,-

749,-

-13%

Hovedbilde Tamiya 86004 PS-4 Polycarbonate Spray Blue 3 oz

Tamiya 86004 PS-4 Polycarbonate Spray Blue 3 oz

This is Tamiya Color Spray Lacquer for Polycarbonate (PS-4 Blue). For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies used in R/C car modeling. An appropriate amount of paint for finishing one R/C model. This paint is impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies. The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS: Net Volume: 100ml COMMENTS: Never use this paint on plastic models. Highly flammable.

109,-

Hovedbilde Traxxas 5360 Engine mount 3x28mm CS with washers (2)/ ...

Traxxas 5360 Engine mount 3x28mm CS with washers (2)/ ...

Engine mount (complete assembly)/ 3x28mm CS with washers (2)/ 3x10 CS with washers (10)

239,-

Hovedbilde Traxxas 5340 Aluminum Exhaust Header Silver Revo

Traxxas 5340 Aluminum Exhaust Header Silver Revo

This is the Aluminum Exhaust Header for the Traxxas Revo. FEATURES Aluminum construction Silver in color Fluted on tuned pipe end for better silicone coupler connection Heatsink engine mounting flange INCLUDES One Exhaust Header REQUIREMENTS Assembly to vehicle SPECIFICATIONS Length: 59mm (2.32") Pipe diameters: Outside-13mm (.52") Inside -10mm (.40") Width between engine exhaust mount holes: 22mm (.866")

249,-

Hovedbilde Traxxas 5648 Spring/Shock Red Long GTR 4.9 Rate Dbl ...

Traxxas 5648 Spring/Shock Red Long GTR 4.9 Rate Dbl ...

This is a Long Spring Set for GTR Shocks used on the Traxxas Summit Monster Truck. FEATURES: Steel construction, red in color 4.9 damping rate with double yellow stripe marking INCLUDES: Two Long Springs for the Traxxas GTR shocks REQUIRES: Installation on shock assembly SPECS: Length: 2" (51mm) Diameter: 0.87" (22.2mm)

75,-

Hovedbilde Traxxas 5649 Spring/Shock Long GTR

Traxxas 5649 Spring/Shock Long GTR

This is a Long Spring Set for GTR Shocks used on the Traxxas Summit Monster Truck. FEATURES: Steel construction, red in color 5.4 damping rate with double orange stripe marking INCLUDES: Two Long Springs for the Traxxas GTR shocks REQUIRES: Installation on shock assembly SPECS: Length: 2" (51mm) Diameter: 0.87" (22.2mm)

69,-

Hovedbilde Absima 250CPS / 23WT Silicone Shock Oil 60ml

Absima 250CPS / 23WT Silicone Shock Oil 60ml

Høykvakitets Silicone demper olje med viskositet 250. En olje som gjør at o-ringer ikke går tørre. Meget bra kvalitet! 60ml flaske.

79,-