Hopp til innhold
Hjem / Reservedeler/Option-parts / Option Parts Biler / Traxxas El-Biler / E-Revo 1/10 Brushless / Traxxas 5185 Rubber Tires Wheelie Bar Wheels (2)

Traxxas 5185 Rubber Tires Wheelie Bar Wheels (2)

Art.nr: TRX 5185

85,-

Traxxas

Traxxas
På lager: 1

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

These are the Rubber Tires for the
         Wheelie Bar for all Traxxas vehicles.

Dette er dekk til TRX 5186 og TRX 5186A.


FEATURES: Constructed of rubber, black in color with with "TRAXXAS" written in
            white on the sidewalls


INCLUDES: Two Rubber Tires for the Wheelie Bar


REQUIRES: Fastening to wheels


SPECS:    Outer Diameter: 1.1"  (29mm)
          Inner Diameter: 0.75" (19mm)
          Width:          0.51" (13mm)

Produsent

Traxxas

Traxxas

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

Hovedbilde Traxxas 2618 Screws, 2.5x16mm cap-head machine (6)
Traxxas 2618 Screws, 2.5x16mm cap-head machine (6)
Screws, 2.5x16mm cap-head machine (6)

30,-

KJØP
Hovedbilde Traxxas 5731X Trim tab adjuster (2)
Traxxas 5731X Trim tab adjuster (2)
Trim tab adjuster (2)/ 4x12mm BCS stainless (4)/ 3x18mm BCS (stainless) (2)/ NL 3.0 (2)   Erstatter TRX 5731.

245,-

KJØP
Hovedbilde RPM 80983 Light Canister Set for RPM Front Bumpers- ... Hovedbilde RPM 80983 Light Canister Set for RPM Front Bumpers- ...
RPM 80983 Light Canister Set for RPM Front Bumpers- ...
RPM Light Canister Set for RPM Front Bumpers Quick Notes: – fits most RPM Front Bumper kits – LEDs not included Our Light Canister Set for RPM Slash 2wd Front Bumpers #80952, #80953 or #80955, Slash 4×4 Bumper #80022, #80023 & #80025, Associated SC10 Front Bumpers #70902 or #70905 and Losi SCTE Front Bumpers #73042 (bumpers not included) is designed to give the appearance of a Baja Desert Truck with its scale off-road light design. Each of its four lights is modeled after a full-sized, 6” off-road light. Each individual light comes with a light canister (or housing), a clear lens and a light guard. Our 4-light set also comes with a unique mounting plate that allows all four lights to sit centered in perfect symmetry within the upper and lower bars of our custom bumpers. The mounting plate uses the same three screws that attach the bumper to the bumper skid plate while keeping the lights recessed and protected by the upper and lower bumper bars. Yes, the lights look simply awesome on the front of the truck but why did we make them? Well, we wanted to light up the night! That’s right, each of the four light canisters come set-up for a 3mm LED light (not included). Our instructions detail a very simple method to install a set of 4 LEDs in our canisters to carry the fun long into the night. Our calculations show that adding 4 – 3mm LEDs and tying the power source directly into the main battery pack creates a minimal draw of power (only 40mAh) but throws out a nice amount of light to keep the fun going as daylight draws to an end! For the ultimate in scale-realism, there is nothing better than the RPM Light Canister set. They are available in classic black or bright chrome. Either looks incredible on the truck and adds the finishing touch to any concourse winning paint job! What’s Included:The RPM Light Canister Set includes: 4 – Light Canisters, 4 – Light Guards, 4 – Clear Lenses, 1 – Light Mount, 4 – M3 x 8mm Flathead Screws & complete instructions. Tech Notes: LED lights are not included. The RPM Light Canister Set will not work with a stock Slash, SC10 or SCTE front bumper. You must use an RPM front bumper for the Slash 2wd, Slash 4×4, SC10 or SCTE only. The RPM Light Canister Set can be modified to fit any number of applications but warranty restrictions do apply. See instructions for more details.

149,-

KJØP
Hovedbilde RPM 81030 ail Light Set for Slash 2WD, Slash 4×4 & AE ... Hovedbilde RPM 81030 ail Light Set for Slash 2WD, Slash 4×4 & AE ...
RPM 81030 ail Light Set for Slash 2WD, Slash 4×4 & AE ...
RPM Tail Light Set for Slash 2WD, Slash 4×4 & AE SC10 2WD Quick Notes: Direct fit with most RPM rear bumpers Fits a variety of applications with minor modifications (warranty restrictions apply) LED’s are not included Our bumper and roof light sets for the Traxxas Slash 2wd, Slash 4×4 and Associated SC10 2wd and other short course trucks light up the night quite nicely but what about the back? We now have a true-to-scale tail light set that bolts right on an RPM rear bumper, taking care of the final piece in the night running puzzle. Our tail lights add that concours winning touch for full-scale realism! With a set of bright white lights out front (using RPM Light Canister Sets) and a set of RPM red tail lights out back, finding your way around at night has never been easier! Our tail light set comes complete with everything needed to bolt a pair of 3mm LED’s (LED’s not included) to an RPM rear bumper (RPM #70122, #70125, #80122, #80123, #80125, #81002, #81003 & #81005) including a pair of red tail light lenses, two lens housings and a pair of mounting plates (the RPM mounting plates can be modified to fit other short course applications as well). The lens housings themselves can also be modified to fit other areas of different vehicles for alternate effects too, such as running a second set of lights as amber marker lights (identical to full-sized short course and Baja racing trucks). For lighting up what’s out front, we have our Light Canister Sets as well as our Roof-Mounted Light Bar Set. RPM light sets are the best and only alternative for continuing your fun long after the sun sets and the lights go out! Tech Notes: 3mm LED lights are not included. The RPM mounting plates and lens housings can be modified to fit any number of applications but warranty restrictions may apply. See instructions for more details. RPM tail light sets are designed specifically for RPM rear bumpers for the Traxxas Slash 2wd, Slash 4×4 and Associated SC10 2wd (sold separately).

99,-

KJØP
Hovedbilde Traxxas 6890X Aluminum Motor Plate Slash 4X4
Traxxas 6890X Aluminum Motor Plate Slash 4X4
This is the optional Aluminum Motor Mount Plate for the Traxxas Slash 4x4. FEATURES: 6061-T6 aluminum construction           Anodized blue in color INCLUDES: One motor mount assembled with a 3x6mm flat head machine screw           One 3mm locknut REQUIRES: Fastening to chassis and installing motor components and driveshaft SPECS:    Length: 56mm (2.2")           Width: 50mm (1.97") at widest point

185,-

KJØP
Hovedbilde Traxxas 6860R Motor Mount Aluminum Slash 4x4
Traxxas 6860R Motor Mount Aluminum Slash 4x4
This is the optional Blue Aluminum Motor Mount for the                             Traxxas Slash 4X4 FEATURES: 6061-T6 aluminum construction, blue in color   INCLUDES: One blue anodized motor mount and hardware.   REQUIRES: Installation following original kit manual    

479,-

499,-

KJØP
-4%
Hovedbilde Yeah Racing 032BK Aluminum Alloy Front Bumper w/LED ... Hovedbilde Yeah Racing 032BK Aluminum Alloy Front Bumper w/LED ...
Yeah Racing 032BK Aluminum Alloy Front Bumper w/LED ...
Aluminum Alloy Front Bumper w/LED Light For Traxxas TRX-4 Axial SCX10 / II Black   NB! NB! Denne passer ikke med Traxxas sin winch TRX 8855   Description: This is a new series of machined aluminum chassis mounted bumpers for SCX10, SCX10 II and Traxxas's TRX-4 from Yeah Racing, protect your chassis when you flip over as the bumper is pointed outwards. This product will fulfill your need for ever more realistic accessories with more scaled accessories. The Bumper features mounting points for winches and dual tow points with shackles included. This bumper mounts onto the frame, so it will for sure fit all SCX10 chassis's and TRX-4.       *Photos for reference only.   Feature: For: Traxxas TRX-4 Defender / Bronco / Axial SCX10 / II HPI Venture/Gmade Bom/Redcat Gen8 Material: Aluminum Alloy Color: Black   Include: Yeah Racing Alloy Front Bumper (1 pc) Mounting Post (2 pcs) LED Cable (1 pc)

439,-

489,-

KJØP
-10%
Hovedbilde Traxxas 5472 Wheelie Bar Assembled Revo
Traxxas 5472 Wheelie Bar Assembled Revo
This is the optional Assembled Wheelie Bar for all versions              of the Traxxas Revo except the 1/16 E-Revo. FEATURES: Nylon construction           Black in color INCLUDES: One Assembled Wheelie Bar REQUIRES: Installation on the Traxxas Revo Sjekk : Trx 5186 eller Trx 5186A

249,-

279,-

KJØP
-11%
Hovedbilde Zap Blue Adhesives Thread Locker .20 oz
Zap Blue Adhesives Thread Locker .20 oz
Pacer has designed this bottle of Threadlocker Compound to be        used on metal fasteners. It is not recommended for plastic parts. INCLUDES: One bottle of Pacer Threadlocker SPECS:    Size: 0.20 ounces (6ml) FEATURES: Medium strength general purpose thread locker           Locks threaded fasteners against vibration           Perfect for use in helicopters and all RC cars           Clean and dry parts for best results (removing grease, oil and dirt)           Parts can be returned to service immediately in MOST CASES           Thread locking compound comes in a Red bottle with a clear nozzle tip COMMENTS: This bottle of glue will appear big in context to the glue.  The             reason being is the glue requires a large amount of oxygen or the             glue will dry out.  All one would need to do once you have the glue             is shake the bottle and turn upside down, if the tip turns Blue             then the glue is present.  To some the bottle may appear empty.

59,-

Ikke på lager
Hovedbilde Traxxas 5661 Motor Mount Hinge Post E-Revo
Traxxas 5661 Motor Mount Hinge Post E-Revo
This is the Motor Mount Hinge Post for the Traxxas E-Revo. FEATURES: Nylon construction           Black in color INCLUDES: One Motor Mount Hinge Post           One 4x10mm socket cap screw with split and flat washer           One 4x12mm socket head screw REQUIRES: Installation on the motor mount and vehicle SPECS:    Length: 22.45mm (0.88")           Diameter: 10mm (0.39")  

29,-

KJØP
Hovedbilde Traxxas 5180 Ball Bearings 6x13x5mm E-Revo (2)
Traxxas 5180 Ball Bearings 6x13x5mm E-Revo (2)
This is a set of Traxxas 6x13x5mm Ball Bearings                    for use on the E-Revo FEATURES: Stainless Steel bearing construction           Blue rubber dirt shields INCLUDES: (2) 6x13x5mm ball bearings  Part #5180 SPECS:    Inside diameter: 6mm (0.24")           Outside diameter: 13mm  (0.51")           Width: 5mm (0.20")

65,-

KJØP
Hovedbilde Traxxas 8647 Rod Ends (Assembled with Hollow Balls) ...
Traxxas 8647 Rod Ends (Assembled with Hollow Balls) ...
Dette produktet er utgått, og er erstattet med 8647X fra Traxxas. Rod Ends (Assembled with Hollow Balls) (8)    

Hovedbilde Traxxas 6511 Link Bluetooth Wireless Module TQi
Traxxas 6511 Link Bluetooth Wireless Module TQi
This is the Traxxas Link TQi Wireless Module. FEATURES For use with the Traxxas Link app and TQi radio system Compatible with iPhone (4S or later) iPad (3rd gen and later) iPod touch (5th gen and later) iPad mini Allows driver to view real time telemetry with optional sensors (sensors not included) Compatible with Android 4.4 and up or Apple iOS 4.3 and later platforms INCLUDES Traxxas Link TQi Wireless Module 1.5mm Hex Wrench 1.5x5mm Hex Head Screw SPECIFICATIONS Dimensions: 1.2 x 1.8 x 0.42" (31.5 x 46.8 x 10.8mm) Weight: 0.26oz (7.5g)

479,-

529,-

KJØP
-9%
Hovedbilde Traxxas 6741 Cover Center Driveshaft Clear
Traxxas 6741 Cover Center Driveshaft Clear
This is the Center Driveshaft Cover for the Traxxas Stampede 4x4. FEATURES: Clear nylon construction INCLUDES: One Center Driveshaft Cover REQUIRES: Installation over driveshaft

49,-

KJØP
Hovedbilde Traxxas 6828X Heavy Duty Diff Output Yokes 4X4 (2)
Traxxas 6828X Heavy Duty Diff Output Yokes 4X4 (2)
These are the Heavy Dyty Differential Output Yokes for the                          Slash 4x4 from Traxxas FEATURES: Black plastic construction INCLUDES: 2 Ouput yokes           2 screw pins REQUIRES: Installation on vehicle

55,-

KJØP
Hovedbilde Robinson Racing 1717 Pinion Gear Absolute 32P 17T
Robinson Racing 1717 Pinion Gear Absolute 32P 17T
This is the Robinson Absolute 32 pitch hardended  pinion gear.     FEATURES Steel construction  Tooth count pressed into the base of the pinion  Hardened   INCLUDES One Absolute 17t pinion and set screw   REQUIREMENTS 1.5mm Allen wrench for the set screw   SPECIFICATIONS  Pitch: 32  Tooth Count: 17

99,-

KJØP
Hovedbilde Robinson Racing 7856 Slipper Unit Gen 3 56T Slash
Robinson Racing 7856 Slipper Unit Gen 3 56T Slash
This is the optional High Performance 32P 56T .8 Mod Slipper Kit from Robinson Racing for the Traxxas Slash. FEATURES: Steel and aluminum construction INCLUDES: One High Performance Slipper Kit: One 52T Spur Gear Aluminum Back Plate Hex Slipper Pad One 7x13mm Bearing One Aluminum Spacer REQUIRES: Installation on the vehicle SPECS:    Tooth: 56T Pitch: 32 Outer Diameter: 46.4mm (1.8") Inner Diameter: 5mm (0.20")       (11)

759,-

KJØP
Hovedbilde Traxxas 3340 Cooling fan, Velineon VXL-3s ESC Hovedbilde Traxxas 3340 Cooling fan, Velineon VXL-3s ESC
Traxxas 3340 Cooling fan, Velineon VXL-3s ESC
The Velineon® VXL-3s Accessory Cooling Fan reduces ESC temperatures during extended operation for maximum power flow. It securely clips onto the VXL-3s heatsink for easy installation. Wires are neatly routed thanks to the integrated connector clip. Simply plug the accessory cooling fan into the Velineon VXL-3s accessory power connector and clip the fan onto the heatsink for increased cooling.  

299,-

329,-

KJØP
-9%
Hovedbilde Traxxas 3762A Ultra Shocks (2) Rear
Traxxas 3762A Ultra Shocks (2) Rear
Denne passer til: -Bandit XL5/VXL bak. -Rustler XL5/VXL bak. -og til flere Traxxas biler. Sjekk manualen til din bil.   This is a pair of the Ultra Shocks for the Traxxas Bandit, Rustler, Stampede 2WD, E-Maxx, T-Maxx and Slash 2WD. FEATURES: Gray composite bodies           Stock replacement unassembled shocks           Preload spacers and two red springs INCLUDES: Two Ultra Shocks for the Traxxas Cars with bottle of silicone             oil and assembly diagram REQUIRES: Assembly COMMENTS: Two pairs are required if replacing all shocks.

219,-

KJØP
Hovedbilde Traxxas 3644 Turnbuckles Camber Link 39mm
Traxxas 3644 Turnbuckles Camber Link 39mm
These are the 39mm Turnbuckle Camber Links                 for the Traxxas Stampede and Rustler VXL. FEATURES: Metal and Nylon Construction           Silver and Black in Color           Assembled w/Rod Ends INCLUDES: Two front 39mm (69mm center to center) turnbuckles and instruction             sheet REQUIRES: Installation on the vehicle

79,-

KJØP
Hovedbilde Traxxas 6850X Heavy Duty Half Shafts Stampede 4X4
Traxxas 6850X Heavy Duty Half Shafts Stampede 4X4
This is the Heavy Duty Half Shaft Set for the Slash 4x4 from Traxxas FEATURES: Black plastic and steel construction INCLUDES: 2 external splined half shafts           2 internal splined half shafts           4 metal u-joints REQUIRES: Installation on vehicle

99,-

KJØP
Hovedbilde Traxxas 6854X Heavy Duty Front Stub Axles 4X4
Traxxas 6854X Heavy Duty Front Stub Axles 4X4
This is the Front Heavy Duty Stub Axles for the Stampede 4x4 from Traxxas FEATURES: Plastic and steel construction INCLUDES: 2 Stub axles REQUIRES: Installation on vehicle

99,-

KJØP
Hovedbilde Traxxas 5459 Boots Drive Shaft Rubber Revo (2)
Traxxas 5459 Boots Drive Shaft Rubber Revo (2)
These are the replacement Drive Shaft Boots for                     the Traxxas Nitro Revo Monster Truck. FEATURES: Rubber Construction           Blue in Color INCLUDES: Two Blue Rubber Driveshaft Boots REQUIRES: Assembly onto Vehicle  

29,-

39,-

KJØP
-26%
Hovedbilde Traxxas 7184 Wheelie Bar Assembled 1/16 E-Revo
Traxxas 7184 Wheelie Bar Assembled 1/16 E-Revo
This is the Wheelie Bar for the Traxxas 1/16 scale E-Revo. FEATURES: Nylon construction           Black in color INCLUDES: One Wheelie Bar           One 2,5x14mm Cap Head Screws           Three 2,5x8mm Cap Head Screws           Instruction Sheet REQUIRES: Installation at rear of chassis

199,-

KJØP
Hovedbilde Traxxas 7056 Half Shafts Center Front/Rear VXL
Traxxas 7056 Half Shafts Center Front/Rear VXL
These are the Front/Rear Center Half Shafts for use on the                  Traxxas 1/16 E-Revo and Slash VXL Vehicles. FEATURES: Nylon construction           Black in color INCLUDES: One Front Center Half Shaft           One Rear Center Half Shaft           Four U-Joints REQUIRES: Installation on the vehicle

75,-

KJØP

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png