Hopp til innhold
Hjem / Reservedeler/Option-parts / Reservedeler Bil / Reservedeler etter Produsent / Traxxas El-Biler / E-Revo 1/10 Brushless / Traxxas 5458X Yokes Differential & Transmission

Traxxas 5458X Yokes Differential & Transmission

Art.nr: TRX 5458X

49,-

Traxxas

Traxxas
På lager: 3

På lager i vår butikk i Oslo

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

These are the Diff and Trans Drive Yokes for the Traxxas E-Revo, E-Maxx and T-Maxx

FEATURES: Black plastic construction


INCLUDES: Two drive yokes
          Two 4x15mm Yoke pins


REQUIRES: T-Maxx 3.3


SPECS:    Length: 15/16" (23mm)
          Diameter: 3/4" (17mm)

 

Produsent

Traxxas

Traxxas

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

Hovedbilde Traxxas 5116A Ball bearings, black rubber sealed ...
Traxxas 5116A Ball bearings, black rubber sealed ...
Disse lagerene er samme størrelse som Tamiya 1150 Ball bearings, black rubber sealed (5x11x4mm) (2)

49,-

På lager 5
KJØP
Hovedbilde Traxxas 5680 Housing Differential Front & Rear
Traxxas 5680 Housing Differential Front & Rear
This is the Housing for the Front and Rear Differential on the                    Traxxas Summit Truck RTR. FEATURES: Nylon construction           Black in color INCLUDES: One Differential Housing REQUIRES: Installation on the vehicle

59,-

På lager 2
KJØP
Hovedbilde Traxxas 5351A T-Maxx® Torque Control Slipper Upgrade ...
Traxxas 5351A T-Maxx® Torque Control Slipper Upgrade ...
Traxxas 5351A - T-Maxx® Torque Control Slipper Upgrade Kit (fits first generation T-Maxx® transmission, w/o Optidrive®) (patent pending)   The Torque-Control slipper clutch upgrade kit fits T-Maxx®Classic, S-Maxx®, and SportMaxx® trucks equipped with the original T-Maxx style black transmission. It features efficient semi-metallic friction pads and allows for spur gear replacement without altering the slipper clutch setting. Kit includes everything needed for the conversion, along with complete instructions and parts exploded views.

289,-

På lager 4
KJØP
Hovedbilde HPI 101939 Plazma 1.5V Alkaline AA Batteries (4)
HPI 101939 Plazma 1.5V Alkaline AA Batteries (4)
Long life, high discharge rate suitable for RC use Alkaline standard batteries for use with radio transmitters or any device that requires AA batteries. Perfect for all HPI RTR kits! Also available are rechargeable AA batteries! #101938 HPI Plazma 1.2V 2700mAh Nimh AA Re-Chargeable Battery (4Pcs)

29,-

På lager 31
KJØP
Hovedbilde Traxxas 1552 Hex Motor Screws (4)
Traxxas 1552 Hex Motor Screws (4)
These are replacement motor screws and washers for any 05 size motor. Features: 6 3x8mm socket head screws           6 3mm washers           1 Hex allen wrench

39,-

På lager 4
KJØP
Hovedbilde FlySky Set transmitter GT2G + receiver FS-A3 Hovedbilde FlySky Set transmitter GT2G + receiver FS-A3
FlySky Set transmitter GT2G + receiver FS-A3
FlySky GT2G transmitter + FS-A3 receiver set Excellent FlySky brand apparatus designed for cars and boats. Most often chosen by beginners but also meets the expectations of more experienced modelers. Great value for money. Included: GT2G apparatus A3 receiver Set of cables Product Model: FS-GT2G Channels: 2 Model: car, boat Wireless frequency: 2.4G Transmission power: <20 dBm Wireless protocol: AFHDS 2A Range: 100 ～ 300m (ground) Channel resolution: 1024 Battery: 1.5AA * 4 Charging port: None Low voltage alarm: ＜ 4.2V Antenna type: external single antenna Data port: phone jack (PPM) Temperature range: 0 ℃ — + 60 ℃ Humidity range: 20% -95% Online update: No Color: Black Dimensions: 210 * 95 * 160mm Weight: 239g Certification: CE, FCC ID: N4ZFLYSKYGT2G Package list: 1 * FS-GT2G transmitter 1 * FS-A3 3CH Receiver 1 * Antenna tube 1 * Bind plug

549,-

599,-

** Ikke på lager
KJØP
-8%
Hovedbilde Traxxas 5452X U-joints Driveshafts Set
Traxxas 5452X U-joints Driveshafts Set
Traxxas 5452X - U-Joints Set U-joints, driveshaft (carrier (4)/ 4.5mm cross pin (4)/ 3mm headed pin (4)/ 4x15mm screw pin (2)/ hex pin (2)/ e-clips (6)/ 3x6x0.5 MW (4)) (metal parts for 2 driveshafts) Driveshaft U-joint rebuild kit. Includes carriers (4), cross pins (4), headed pins (4) screw pins (2), hex pins (2), and E-clips (6). Rebuilds 2 driveshafts. Replacement part for these models: Ford® Fiesta® ST Rally Brushless Maxx® Rustler® 4X4 Brushless Slash® 4X4 Brushless Stampede® 4X4 Brushless

129,-

139,-

På lager 2
KJØP
-7%
Hovedbilde Traxxas 5473 Wheelie Bar Mount Revo/ E-Revo
Traxxas 5473 Wheelie Bar Mount Revo/ E-Revo
Wheelie Bar Mount Revo/ E-Revo   Wheelie bar mount (1)(fits 1/10 scale Revo trucks)

79,-

På lager 3
KJØP
Hovedbilde Traxxas 5363X Fuel Tank 150cc
Traxxas 5363X Fuel Tank 150cc
Fuel tank, 150cc (complete)

199,-

219,-

På lager 1
KJØP
-9%
Hovedbilde Traxxas 4579X Connector Wiring Harness 4570/5270 Revo
Traxxas 4579X Connector Wiring Harness 4570/5270 Revo
 This is the Updated Wire Harness for the EZ Start and EZ Start 2 Systems.     This harness has the white connector that the EZ Start pack plugs into. FEATURES: Extra long 12" wires           Pre-installed connectors and eyelets INCLUDES: One wire harness           One black connector bracket REQUIRES: Installation onto vehicle equipped with EZ Start or EZ Start 2. COMMENTS: The differences between this and the old design are:  Longer wire            leads, L-shaped motor connectors, and one continuous glow plug wire.

65,-

På lager 1
KJØP
Hovedbilde RECEIVER FLYSKY FGR4S Hovedbilde RECEIVER FLYSKY FGR4S
RECEIVER FLYSKY FGR4S
Mottaker til FlySky Noble FS-NB4 PL18. Egner seg godt til radiostyrt bil og båt.   Informasjon på engelsk: 2.4GHz 4 channel receiver is compatible with FlySky Noble FS-NB4 PL18 Transmitter, good for Rc Car and Rc Boat. FGr4S adopts AFHDS 3, Flysky’s third-generation automatic frequency hopping digital system. Easy to bind and very fast link-up, quick and extremely stable in performance. It uses an internal single antenna with two-way transmission capabilities and is designed to be compact and easy to install. The receiver supports PPM/i-bus/PWM data output, suitable for AFHDS3 system remote controller.   Fra produsenten: Product Model: FGr4S PWM channel: 4 Wireless frequency: 2.4GHz Wireless protocol: AFHDS 3 Range:> 200m (ground) Antenna type: Built-in single antenna Power: 3.5-8.4V RSSI: Supported Data port: PWM / PPM / i.bus / s.bus Temperature range: -10 ℃ — + 60 ℃ Humidity range: 20% -95% Online Update: Yes Dimensions: 25.5 * 22 * 17.3 mm Weight: 5.1g Certification: CE, MIC, RCM, FCC ID: N4ZFGRS400   Package List: 1 * FGr4S Receiver 1 * Binding Cable Binding: To ensure good signal strength, make sure the receiver antenna is as far away from any metal parts when installing the receiver. 1. Insert the binding cable into the receiver’s BIND port. 2. Plug the power cable into any other port, and the receiver’s LED will start to flash quickly indicating that it has entered bind mode. 3. Put the transmitter into bind mode; (See the transmitter’s instruction manual for more information.) 4. Binding is successful when the receiver’s LED starts to flash slowly. Remove the power and bind cables from the receiver *if the transmitter is bidirectional the reciever status indicator will not fash slowly. 5. Reconnect the power cable to the receiver. 6. Check to make sure that the transmitter and receiver are working as expected, if there are any issues or unexpected operation follow the steps above to bind again.

595,-

695,-

På lager 6
KJØP
-14%
Hovedbilde Traxxas 4954R Wheel Hubs Hex E-Maxx
Traxxas 4954R Wheel Hubs Hex E-Maxx
This is a pair of replacement Wheel Hex Hubs for the                            Traxxas E-Maxx. FEATURES: Steel construction, black in color           Replaces worn or damaged hexes INCLUDES: Two Wheel Hub Hexes           Two 2.5x12mm Axle Pins REQUIRES: Installation SPECS:    Hex Size: 14mm           Thickness: 6mm

39,-

På lager 4
KJØP
Hovedbilde Traxxas 5646 20T Pinion For 5mm Shaft
Traxxas 5646 20T Pinion For 5mm Shaft
This is a Traxxas 20 Tooth Pinion Gear for a 5mm Motor Shaft. FEATURES: Silver in color           Metal construction INCLUDES: (1) 20 Tooth Pinion Gear           (1) One 4mmx3.5mm set screw REQUIRES: Installation on motor shaft SPECS:    Outer Diameter: 18.0mm            Inner Diameter: 5mm (0.20")

69,-

Ikke på lager
Ikke på lager
Hovedbilde Traxxas 5644 18T 32P Pinion For 5mm Shaft
Traxxas 5644 18T 32P Pinion For 5mm Shaft
This is a Traxxas 18 Tooth Pinion Gear for a 5mm Motor Shaft. FEATURES: Silver in color           Metal construction INCLUDES: (1) 18 Tooth Pinion Gear           (1) One 4mmx3.5mm set screw REQUIRES: Installation on motor shaft SPECS:    Outer Diameter: 15.5mm (0.61")           Inner Diameter: 5mm (0.20") Pitch 32P

69,-

79,-

På lager 3
KJØP
-13%
Hovedbilde Traxxas 3961 Spur Gear 0.8P 68T
Traxxas 3961 Spur Gear 0.8P 68T
This is the optional .8 Metric Pitch 68 Tooth Spur Gear                            for the Traxxas E-Maxx. FEATURES: Nylon construction, black in color           .8 metric pitch INCLUDES: One 68T 0.8 metric pitch spur gear REQUIRES: Installation on the vehicle SPECS:    Diameter: 2.16" (55mm)           Thickness: .23" (6mm)

39,-

På lager 2
KJØP
Hovedbilde Traxxas 2552 Screws Countersunk Machine 3x12mm Revo ...
Traxxas 2552 Screws Countersunk Machine 3x12mm Revo ...
This is a package of six 3x12mm Traxxas Countersunk Hex Head Screws. FEATURES: Steel construction, Black in color           Used on the Traxxas Revo monster truck, can also be used in any             application where a 3x12mm countersunk screw is required INCLUDES: Six 3x12mm Traxxas Countersunk Hex Screws REQUIRES: 2mm hex head wrench. SPECS:    Length:  12mm           Diameter: 3mm

35,-

På lager 1
KJØP
Hovedbilde Traxxas 1747 Nylon Locknuts (10)
Traxxas 1747 Nylon Locknuts (10)
These are 4mm Locking Nuts from Traxxas. FEATURES: Stainless steel construction.           Nylon insert. INCLUDES: 10 Lock Nuts SPECS:    Size:  4mm                       

30,-

På lager 9
KJØP
Hovedbilde Traxxas 4955 Axle Pins T-Maxx (4)
Traxxas 4955 Axle Pins T-Maxx (4)
 This is the Set of Axle Pins for the Traxxas T-Maxx 4WD RTR Monster Truck.              These pins go through the stub axles on each wheel,                the wheel hubs are then placed over these pins. FEATURES: Replaces missing axle pins           Axle pins are steel   INCLUDES: Four 2.5x12mm axle pins   REQUIRES: Inserting pins through stub axles (4953) and installing wheel hubs             (4954) over pins.    

19,-

På lager 6
KJØP
Hovedbilde Sunpadow 2S 5300mAh -100C - ERC LiPo
Sunpadow 2S 5300mAh -100C - ERC LiPo
2S 5300mAh -100C - Sunpadow ERC LiPo Sunpadow 2s 5300mAh 100C. Kraftig hardcase LiPopakke med meget høy C-rating. Passer utmerket til både on- og off-road samt crawling. Batteriet leveres i egen oppbevaringseske. Leveres uten lade/drift-kabel.   Spesifikasjoner: Kapasitet: 5300mAh Spenning: 2S 7.4V C-Rating 100C Anbefalt ladestyrke:     1C Vekt: 270gram Størrelse: 139x47x25.1mm Kontakt: 4mm gull

399,-

419,-

** Ikke på lager
KJØP
-5%
Hovedbilde Louise 3200SB Tire & Wheel ST-SPIDER 2,2 Hovedbilde Louise 3200SB Tire & Wheel ST-SPIDER 2,2
Louise 3200SB Tire & Wheel ST-SPIDER 2,2" Black Soft ...
Louise ST-SPIDER Stadium Truck Soft Tires on 2.2" Black Wheels Stadium Truck tires mounted on 2.2" black wheels that is a perfect upgrade for your Traxxas 1/16 E-REVO or 1/16 Summit. Fits: Traxxas 1/16 E-REVO Front & Rear Traxxas 1/16 SUMMIT Front & Rear HPI Savage XS Flux Front & Rear 1/10 Scale Buggies Rear Specs: Wheel diameter: 2.2" Tire Diameter: 90 mm Tire Width: 42.5 mm Weight (each): 81 g Hex: 12 mm Tire Compound: Soft Wheel finish: Black Nylon Original Traxxas 1/16 E-REVO Tire info: Diameter: 82 mm Width: 46 mm Total Track Width: 240 mm Traxxas 1/16 E-REVO with Louise ST-Spider 2.2" Truck Tires: Total Track Width: 260 mm (+10 mm off-set per wheel) 8 mm larger diameter: you may need adjust the vehicle gearing to not overload the motor/esc The added off-set may put more load on the steering servo

269,-

289,-

** Ikke på lager
KJØP
-7%
Hovedbilde Traxxas 2553 Screws Countersunk Machine 3x15mm Revo ...
Traxxas 2553 Screws Countersunk Machine 3x15mm Revo ...
This is a package of six 3x15mm Traxxas Countersunk Hex Head Screws. FEATURES: Steel construction, Black in color           Used on the Traxxas Revo monster truck, can also be used in any             application where a 3x15mm countersunk screw is required INCLUDES: Six 3x15mm Traxxas Countersunk Hex Screws REQUIRES: 2mm hex head wrench. SPECS:    Length:  15mm           Diameter: 3mm

35,-

På lager 1
KJØP
Hovedbilde Traxxas 3956 Spur Gear 0.8P 54T
Traxxas 3956 Spur Gear 0.8P 54T
This is the 54 Tooth Spur Gear. FEATURES: Nylon construction           Black in color           .8 Module pitch INCLUDES: One 54T 0.8 Pitch Spur Gear REQUIRES: Assembly onto vehicle  

39,-

På lager 6
KJØP
Hovedbilde Traxxas 6522 Sensor RPM Short 3x4mm BCS (
Traxxas 6522 Sensor RPM Short 3x4mm BCS (
This is the Short RPM Sensor for the                    XO-1 On-Road Car from Traxxas. FEATURES: Functions with the Traxxas Link system to display motor RPM INCLUDES: Short RPM Sensor with Zip Tie, 3x4mm Button Head Cap Screw and             3x4mm Set Screw SPECS:    Length: 7.5" (190mm)

139,-

159,-

På lager 3
KJØP
-13%
Hovedbilde Traxxas 5351 Slipper Pressure Plate & Hub Alloy
Traxxas 5351 Slipper Pressure Plate & Hub Alloy
This is a Replacement Slipper Pressure Plate and Slipper Hub for the Revo.                  These are part of the slipper assembly. FEATURES: Aluminum construction INCLUDES: One slipper pressure plate           One slipper hub REQUIRES: Installation onto vehicle.

99,-

Kontakt oss for mer informasjon om dette produktet
Ikke på lager
Hovedbilde Traxxas 5318 Steel Pushrod Revo (2)
Traxxas 5318 Steel Pushrod Revo (2)
This is the pair of Steel Pushrods for the Traxxas Revo. FEATURES: Metal pushrod construction           Plastic rod ends with hollow ball ends INCLUDES: (2) pushrods           (4) rod ends           (4) hollow ball ends REQUIRES: Installation on a Traxxas Revo SPECS:    Pushrod length end-to-end:      4-1/16"        (102mm)           Pushrod length between threads:  3-1/4"        ( 81mm)           Diameter of unthreaded section:   3/16"        (  5mm) COMMENTS: These pushrods work with the long travel TRX 5356, or              progressive rocker 1 TRX 5357, arm sets.

89,-

På lager 6
KJØP

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png