Hopp til innhold
Hjem / Radio/Servo/Motor / Radioutstyr / Sendere / Fly sky sendere / FlySky Set transmitter GT2G + receiver FS-A3
-8%

FlySky Set transmitter GT2G + receiver FS-A3

Art.nr: FS-GT2G

549,-

599,-

- 8%
Fly-Sky

Fly-Sky
** Ikke på lager

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

FlySky GT2G transmitter + FS-A3 receiver set

Excellent FlySky brand apparatus designed for cars and boats. Most often chosen by beginners but also meets the expectations of more experienced modelers. Great value for money.

Included:

  • GT2G apparatus
  • A3 receiver
  • Set of cables

Product Model: FS-GT2G

Channels: 2

Model: car, boat

Wireless frequency: 2.4G

Transmission power: <20 dBm

Wireless protocol: AFHDS 2A

Range: 100 ～ 300m (ground)

Channel resolution: 1024

Battery: 1.5AA * 4

Charging port: None

Low voltage alarm: ＜ 4.2V

Antenna type: external single antenna

Data port: phone jack (PPM)

Temperature range: 0 ℃ — + 60 ℃

Humidity range: 20% -95%

Online update: No

Color: Black

Dimensions: 210 * 95 * 160mm

Weight: 239g

Certification: CE, FCC ID: N4ZFLYSKYGT2G


Package list:
1 * FS-GT2G transmitter
1 * FS-A3 3CH Receiver
1 * Antenna tube

1 * Bind plug

Produsent

Fly-Sky

Fly-Sky

Relaterte produkter

 

Hovedbilde RC4WD B0092 Chevrolet Blazer Hard Body Complete Set Hovedbilde RC4WD B0092 Chevrolet Blazer Hard Body Complete Set
RC4WD B0092 Chevrolet Blazer Hard Body Complete Set
Art.nr: B0092
Copied
This is the RC4WD Chevrolet Blazer Hard Body Complete Set. FEATURES Fits RC4WD Trail Finder 2 Truck Kit  Injection molded plastic construction, gray in color  Opening hood with metal hinges, and magnets to keep hood closed  Complete highly detailed interior with dash decal  Metal Blazer and Chevrolet emblems  Clear molded windows  Opening rear window and tailgate  Removable top  LED lighting compatible (LED lights not included)   INCLUDES Chevrolet Blazer with Windows, Detailed Interior, Dash Decal,  Removal Top, Metal Hinges, and Assembly Instructions   REQUIREMENTS Modeling Knife  Long Nose Pliers  Plastic Cement  Non-Whitening CA Glue  1.5mm, 2mm, 2.5mm Hex Drivers  Small Phillips Screwdriver This product does require assembly Instructions are included Painting the body is needed for your color preference No paint is included   SPECIFICATIONS  Wheelbase: 11.3" (287mm)  Total Width: 11.7" (299mm)  Total Length: 19.8" (502mm)  Total Weight: 42.33oz (1200g)

2.295,-

2.395,-

KJØP
-4%
Hovedbilde Fly-Sky FS-A3 3 channel receiver for FS-GT2E Radio
Fly-Sky FS-A3 3 channel receiver for FS-GT2E Radio
Art.nr: FS-A3
Copied
Description: The Flysky FS A3 is a 3-channel receiver. Compatible with GT2E, GT2G, GT2F, IT4S, GT5, I4X, I6, I6X, I6S, TH9A, TM10, I8 and I10. Specifications: Channels 3 RF 2.4 GHz Protocol AFHDS 2A Input Voltage 4–6.5 V Dimensions 35 × 22 × 12 mm Weight 6 g Range 500–1500 m (air) Suitable For Cars, boats, aircraft models, etc.

199,-

249,-

KJØP
-20%

Kunder kjøpte også

Hovedbilde TAMIYA 53008 1150 SEALED BEARING SET 4PC
TAMIYA 53008 1150 SEALED BEARING SET 4PC
TAMIYA RC 1150 SEALED BEARING SET 4PC The 1150 (5x11x4mm) ball bearing is the most commonly used size that can be used in the vast majority of Tamiya R/C kits. This specific set uses rubber seals to help keep debris from the ball bearings found behind the seal. Use this set to improve efficiency and speed of your favorite Tamiya R/C kit. 5x11 MM rubber sealed ball bearing.

199,-

229,-

KJØP
-13%
Hovedbilde Yeah Racing Aluminum 7075 Hard Coated Motor ...
Yeah Racing Aluminum 7075 Hard Coated Motor ...
Yeah Racing Aluminum 7075 Hard Coated Motor Gear/Pinions 06P 23T for Tamiya car kits Description: Replace parts to the original motor gear/pinions for Tamiya car, which is made of durable 7075 aluminum Specification: Material Aluminum Pitch Mod 0.6 Product Type Pinion Gear Teeth 23T Feature: Material: Aluminum Color: Titanium Include: Aluminum 7075 Hard Coated Motor Gear/Pinions 06P 23T (1 pc) Set screw (1 pc) How to calculate Final Gear Ratio? For example, if your car has the following setting: Motor Gear: 25 Spur Gear: 84 Pulley: 19 Gear Differential: 38 Firstly, we need to calculate the 'Motor Gear to Spur Gear Ratio', divide 84 by 25 equal to 3.36. Then we need to calculate the 'Pulley to Gear Differential Ratio', divide 38 by 19 equal to 2. Finally, the 'Final Gear Ratio' is 3.36 x 2 = 6.72. Motor Turn used based on Final Gear Ratio: 3.5T: 9.5-10 4.0T: 8.9-9.5 8.5T: 6.4-7.0

59,-

KJØP
Hovedbilde Yeah Racing Aluminum 7075 Hard Coated Motor ...
Yeah Racing Aluminum 7075 Hard Coated Motor ...
Yeah Racing Aluminum 7075 Hard Coated Motor Gear/Pinions 06P 22T for Tamiya car kits Description: Replace parts to the original motor gear/pinions for Tamiya car, which is made of durable 7075 aluminum Specification: Material  Aluminum Pitch  Mod 0.6 Product Type  Pinion Gear Teeth  22T Feature: Material: Aluminum Color: Titanium Include: Aluminum 7075 Hard Coated Motor Gear/Pinions 06P 22T (1 pc) Set screw (1 pc) How to calculate Final Gear Ratio? For example, if your car has the following setting: Motor Gear: 25 Spur Gear: 84 Pulley: 19 Gear Differential: 38 Firstly, we need to calculate the 'Motor Gear to Spur Gear Ratio', divide 84 by 25 equal to 3.36. Then we need to calculate the 'Pulley to Gear Differential Ratio', divide 38 by 19 equal to 2. Finally, the 'Final Gear Ratio' is 3.36 x 2 = 6.72. Motor Turn used based on Final Gear Ratio: 3.5T: 9.5-10 4.0T: 8.9-9.5 8.5T: 6.4-7.0

59,-

KJØP
Hovedbilde Tamiya 47367 1/10 Manta Ray 2018 4WD Kit No Esc Hovedbilde Tamiya 47367 1/10 Manta Ray 2018 4WD Kit No Esc
Tamiya 47367 1/10 Manta Ray 2018 4WD Kit No Esc
This is the Radio Controlled, Electric Powered, 1/10 scale Manta Ray 2018 Buggy Kit from Tamiya. FEATURES Chassis: Bathtub type with honeycomb pattern for strength and rigidity Drive: Four wheel Gearboxes: Sealed, quick-access hatch for easy maintenance Body: Molded polycarbonate, large rear wing for downforce Suspension: Four wheel double wishbone Shocks: CVA oil-filled Shock Towers: Plastic Tires: Rubber, all-terrain spike Wheel: Dish type plastic, white in color INCLUDES Manta Ray 2018 Buggy Kit with Clear Body, Rear Wing, Tires, Wheels, Decals and Instructions REQUIREMENTS Radio: 2-channel w/high-torque steering servo ESC Battery: 6-cell stick pack with Standard plug Battery Charger: Timed or peak type for 6-cell battery AA Batteries: For transmitter Paint, building and track equipment

1.795,-

1.895,-

KJØP
-5%
Hovedbilde Savox SC-0252MG PLUS - 0.19speed/10.5kg Hovedbilde Savox SC-0252MG PLUS - 0.19speed/10.5kg
Savox SC-0252MG PLUS - 0.19speed/10.5kg
Savöx Digital Servo SC-0252MG   4.8V Speed: 0.23 6.0V Speed: 0.19 4.8V Torque: 7.2 kg-cm 6.0V Torque: 10.5 kg-cm Dimensions: 40.7 x 19.6 x 39.4mm Weight: 49 gram Gear: Metal Ballbearing: 2

399,-

439,-

KJØP
-9%
Hovedbilde Tamiya 86041 PS-41 Polycarb Spray Bright Silver 3 oz
Tamiya 86041 PS-41 Polycarb Spray Bright Silver 3 oz
 This is Tamiya Color Spray Lacquer for Polycarbonate (PS-41 Bright Silver).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.

109,-

KJØP
Hovedbilde Traxxas 5114 Ball Bearings 5x8x2.5mm Revo (2) Hovedbilde Traxxas 5114 Ball Bearings 5x8x2.5mm Revo (2)
Traxxas 5114 Ball Bearings 5x8x2.5mm Revo (2)
Disse lagerene er samme størrelse som Tamiya 850 This is a 2 pack of Traxxas 5X8mm Ball Bearings. FEATURES: Metal bearing construction           Blue rubber dirt shields INCLUDES: (2) 5X8mm ball bearings    Part #5114 SPECS:    Inside diameter:      3/16"    (5mm)           Outside diameter:     5/16"    (8mm)           Width:                3/32"  (2.5mm)

49,-

KJØP
Hovedbilde Tamiya 45062 TSU-05 Digital Servo (Drip Proof)
Tamiya 45062 TSU-05 Digital Servo (Drip Proof)
This water resistant digital servo has resistance to small amounts of water, protecting it from damage if the model moves through some standing water or suddenly encounters wet conditions. The servo features a gold colored heat-sink for increased durability.  Water resistant Digital Servo x1 Servo Horn x1 Includes 2.6x8mm tapping screw. PRODUCT INFORMATION: Specifications: Operating angle: One side more than 45 degrees Output torque: 4.0kg.com (using 6V battery) Operating speed: 0.17 sec/60 degrees (using 6V battery) Dimensions: 40.0 x 20.0 x 37.0mm Weight: 40g

529,-

KJØP
Hovedbilde Fuse Overgang - Male Tamiya til Female T-Plug
Fuse Overgang - Male Tamiya til Female T-Plug
Praktisk og kompakt overgang fra Tamiya til Deans. Ypperlig om man f.eks har batterier med Tamiya-kontakter som skal benyttes mot et Deans oppsett.

45,-

KJØP
Hovedbilde Traxxas 4579X Connector Wiring Harness 4570/5270 Revo
Traxxas 4579X Connector Wiring Harness 4570/5270 Revo
 This is the Updated Wire Harness for the EZ Start and EZ Start 2 Systems.     This harness has the white connector that the EZ Start pack plugs into. FEATURES: Extra long 12" wires           Pre-installed connectors and eyelets INCLUDES: One wire harness           One black connector bracket REQUIRES: Installation onto vehicle equipped with EZ Start or EZ Start 2. COMMENTS: The differences between this and the old design are:  Longer wire            leads, L-shaped motor connectors, and one continuous glow plug wire.

65,-

KJØP
Hovedbilde Traxxas 5456 Half Shafts Center (2)
Traxxas 5456 Half Shafts Center (2)
   These are the Center Half Shafts for the Traxxas Revo 3.3. FEATURES: Constructed of hardened plastic           For front and rear driveshafts INCLUDES: Two external splined shafts           Two internal splined shafts REQUIRES: Installing between yokes on each drive shaft assembly SPECS:    Length: 1.9" (48.2mm)

55,-

KJØP
Hovedbilde Traxxas 5458X Yokes Differential & Transmission
Traxxas 5458X Yokes Differential & Transmission
These are the Diff and Trans Drive Yokes for the Traxxas E-Revo, E-Maxx and T-Maxx FEATURES: Black plastic construction INCLUDES: Two drive yokes           Two 4x15mm Yoke pins REQUIRES: T-Maxx 3.3 SPECS:    Length: 15/16" (23mm)           Diameter: 3/4" (17mm)  

49,-

KJØP
Hovedbilde Traxxas 5473 Wheelie Bar Mount Revo/ E-Revo
Traxxas 5473 Wheelie Bar Mount Revo/ E-Revo
Wheelie Bar Mount Revo/ E-Revo   Wheelie bar mount (1)(fits 1/10 scale Revo trucks)

79,-

KJØP
Hovedbilde Traxxas 5452X U-joints Driveshafts Set
Traxxas 5452X U-joints Driveshafts Set
Traxxas 5452X - U-Joints Set U-joints, driveshaft (carrier (4)/ 4.5mm cross pin (4)/ 3mm headed pin (4)/ 4x15mm screw pin (2)/ hex pin (2)/ e-clips (6)/ 3x6x0.5 MW (4)) (metal parts for 2 driveshafts) Driveshaft U-joint rebuild kit. Includes carriers (4), cross pins (4), headed pins (4) screw pins (2), hex pins (2), and E-clips (6). Rebuilds 2 driveshafts. Replacement part for these models: Ford® Fiesta® ST Rally Brushless Maxx® Rustler® 4X4 Brushless Slash® 4X4 Brushless Stampede® 4X4 Brushless

129,-

139,-

KJØP
-7%
Hovedbilde Traxxas 5363X Fuel Tank 150cc
Traxxas 5363X Fuel Tank 150cc
Fuel tank, 150cc (complete)

199,-

219,-

KJØP
-9%
Hovedbilde Tamiya 54579 1150 Bearing(16stk)
Tamiya 54579 1150 Bearing(16stk)
This is a package of sixteen 5x11mm Ball Bearings from Tamiya. FEATURES Replaces plastic bushings in many Tamiya entry level kits  May also be used anywhere a ball bearing this size is needed INCLUDES Sixteen 5x11mm Ball Bearings SPECIFICATIONS  Inner Diameter: 5mm  Outer Diameter: 11mm  Thickness: 4mm

249,-

269,-

KJØP
-7%
Hovedbilde Tamiya 45069 RC BRUSHLESS ESC TBLE-04S
Tamiya 45069 RC BRUSHLESS ESC TBLE-04S
TAMIYA 45069 RC BRUSHLESS ESC 04S This ESC is designed for use with Tamiya Brushless Motors (Sensored) 15.5T and over, (Aftermarket brands 21.5 and over), and also brushed motors 25T and over. High point, neutral brake and brake settings are individually adjustable, while battery cut-off, reverse and motor modes can be selected. Setup is shown by an LED, and the ESC also features two protection functions. Maximum continuous current: 75A Input voltage: 6.6V - 7.2V Dimensions: 41.5mm x 33.4mm x 18mm Weight: 45g (including cables) • Sensored brushless ESC detects motor rotor positions with precision, enabling more efficient power supply and smoother motor response. • Compatible with Tamiya brushless motors (sensored) of 21.5+ turns, and Tamiya brushed motors 25 turns and over. • Choose from 10 different settings for both neutral brake and brake, to get your setup just how you want it. • Features overheating and overload protection functions to help ensure that your equipment avoids damage. • Weight: 47g (including cables) • Compatible with Ni-Cd, Ni-MH and Tamiya Li-Fe battery packs. • Dimensions: 41.5 x 33.4 x 18mm LO/HI Battery Cut-off Information: LOW & HIGH Battery Low Voltage Protection Feature: LOW battery setting cuts off @ 5.6 volts approximately. (Best for Ni-CD, NI-MH and Li-FE battery chemistry) HIGH battery setting cuts off @ 6.2 volts approximately. (Best for other battery chemistries) SPECIFICATIONS Electronic Speed Control (esc)  Maximum continuous current: 75A Input voltage: 6.6V - 7.2V Dimensions: 41.5mm x 33.4mm x 18mm Weight: 45g (including cables) Special Feature 1 LOW & HIGH Battery Low Voltage Protection Feature: LOW battery setting cuts off @ 5.6 volts approximately. (Best for Ni-CD, NI-MH and Li-FE battery chemistry) HIGH battery setting cuts off @ 6.2 volts approximately. (Best for other battery chemistries)

769,-

799,-

KJØP
-4%
Hovedbilde Power HD 9001MG SERVO (9.8KG/0.14SEC)
Power HD 9001MG SERVO (9.8KG/0.14SEC)
SERVO HD9001MG (9.8KG/0.14SEC)

249,-

269,-

KJØP
-7%
Hovedbilde Traxxas 2992 iD-Charger and Battery 7,4V 5800mAh Combo ...
Traxxas 2992 iD-Charger and Battery 7,4V 5800mAh Combo ...
  Charger and LiPo Combo Pack that is perfect for Traxxas Models!   Includes: 1x Traxxas EZ-Peak Charger with iD™ (#2970) 1x Traxxas 2S 5800 mAh LiPo Batteries with iD™ (#2843X)

1.495,-

1.649,-

KJØP
-9%
Hovedbilde Tamiya 58587 1/10 Neo Fighter DT-03 Buggy Kit no ESC Hovedbilde Tamiya 58587 1/10 Neo Fighter DT-03 Buggy Kit no ESC
Tamiya 58587 1/10 Neo Fighter DT-03 Buggy Kit no ESC
TAMIYA RC NEO FIGHTER BUGGY The 2WD buggy The Frog will be a model familiar to many who joined in the first R/C boom of the 1980s. Now, it serves as the inspiration for this new model, the Neo Fighter Buggy. At home both on- and off-road, this 2WD buggy features a lightweight yet tough monocoque frame that protects vital equipment such as the servo and battery from damage; its long form also offers great stability. Coupled with friction dampers and 4-wheel double wishbone suspension, it means the Neo Fighter Buggy performs well even on difficult off-road surfaces. Such a combination of hassle-free assembly and high-performance, light-on-its-feet handling is sure to recommend this model not only to fans of the past, but also to the next generation of R/C racers! DT-03 Chassis at a glance: The stylish slim-line form of this chassis stems from its lightweight yet durable monocoque frame, which features a longitudinally-positioned battery and the R/C equipment along the centerline for excellent balance. The combination of a long 287mm wheelbase and 4-wheel double wishbone suspension married to CVA oil dampers with long arms, allows the model to handle with stability on poor surfaces. Ribbed front and square spike rear tires provide ample grip, and the rear-positioned gearbox is sealed to protect from dust and dirt, with the built-in differential gear offering smooth cornering. SPECIFICATIONS Adjustable Gear Ratio Yes Bearings Plastic bushing Body Material Polycarbonate Body Stickers Included Chassis Material Plastic Chassis Type DT-03 Construction Type Assembly Kit Differential Type Gear Drive Type 2WD Electronic Speed Control (esc) not Included Led Light Buckets no Motor 540-brushed type Required To Complete 2-channel radio,esc, steering servo, 7.2volt battery & battery charger, and Tamiya PS paint. Scale 1/10 Shock Damper Friction damper Special Feature 1 Monocoque DT-03 chassis Special Feature 2 Utilizes a longitudinally-placed rear motor, rear-wheel drive set-up. Special Feature 3 Long wheelbase design enables stable performance. Special Feature 4 The angle of the skid-shaped underside has been increased to raise the car?s off-road potential. Special Feature 5 Features a newly-designed body molded in tough polycarbonate material. Special Feature 6 Includes a torque-tuned motor and CVA shock units. Suspension Fully Independent Double Wishbone Terrain Use Off-Road Required To Complete: 2-channel radio & esc steering servo 7.2volt battery battery charger Tamiya PS paint.

1.295,-

1.495,-

Ikke på lager
-13%
Hovedbilde Tamiya 53930 BZ Super Stock 23T Motor Hovedbilde Tamiya 53930 BZ Super Stock 23T Motor
Tamiya 53930 BZ Super Stock 23T Motor
This is a Tamiya RC BZ Super Stock 23T Motor.     FEATURES Stand up brush hoods This is a high torque motor designed for R/C off road cars Equipped with brush damper that enables firm contact with commutator Features terminal heat sink and chip type condenser End bell features blue anodized aluminum finish Can be used in Tamiya official races Preinstalled surface mount capacitors Preinstalled leads with 4mm bullet connectors Sponge motor covers Bushings     INCLUDES One motor Two sponge covers Three urethane bands (to secure the sponge covers)     SPECIFICATIONS Length: 2.2" (55mm) can excluding shaft 0.39" (10mm) (shaft) Diameter: 1.4" (36mm) can 0.12" (3mm) (shaft) Usable voltage: 7.2V R.P.M. at best efficiency: 26,500rpm (7.2V) Torque at best efficiency: 49mN-m(7.2V)

549,-

599,-

KJØP
-8%
Hovedbilde Tamiya 85063 TS-63 NATO Black Lacquer Spray Paint ...
Tamiya 85063 TS-63 NATO Black Lacquer Spray Paint ...
The TS-63 Nato Black Spray Paint is a synthetic lacquer which can be used to paint plastic model kits. Each can contains 100ml of paint, and are not affected by acrylic or enamel paints, meaning further detailing is possible.

109,-

KJØP
Hovedbilde Tamiya 85061 Spray Lacquer TS-61 NATO Green 3 oz
Tamiya 85061 Spray Lacquer TS-61 NATO Green 3 oz
 This is Tamiya Color Spray Paint for Plastics (TS-61 NATO Green).                           For Adult Modelers Only. FEATURES: Extremely useful for painting large surfaces.           The paint is a synthetic lacquer that cures in a short period of time           Not effected by acrylic or enamel paints; therefore, details can be             added after painting.           Enough paint to fully cover 2 or 3, 1/24 scale sized car bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Paint (TS-61 NATO Green) SPECS:    Net Volume: 100ml COMMENTS: Highly flammable.

109,-

KJØP
Hovedbilde Tamiya 86059 PS-59 Dark Metallic Blue 100ml Spray Can
Tamiya 86059 PS-59 Dark Metallic Blue 100ml Spray Can
This is Tamiya Color Spray Lacquer for Polycarbonate (PS Dark Metallic Blue).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling           An appropriate amount of paint for finishing one R/C model           This paint is impervious to oil and fuels, so it can be safely             used on gas-powered R/C bodies           The color of the lid represents the color of paint INCLUDES: PS Dark Metallic Blue Spray Can of Lacquer SPECS:    Net Volume: 3.4oz (100ml) COMMENTS: Never use this paint on plastic models           Highly flammable

109,-

KJØP
Hovedbilde Dynomax 9533 Connector Tamiya Pair
Dynomax 9533 Connector Tamiya Pair
Connector Tamiya Pair

25,-

35,-

KJØP
-29%

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png