Hopp til innhold
Hjem / Dekk & felg / Traxxas El-Biler / 4wd / E-revo 1/16 VXL / Louise 3200SB Tire & Wheel ST-SPIDER 2,2" Black Soft (2)
-7%

Louise 3200SB Tire & Wheel ST-SPIDER 2,2" Black Soft (2)

Art.nr: 3200SB

269,-

289,-

- 7%
LOUISERC

LOUISERC
** Ikke på lager

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Louise ST-SPIDER Stadium Truck Soft Tires on 2.2" Black Wheels

Stadium Truck tires mounted on 2.2" black wheels that is a perfect upgrade for your Traxxas 1/16 E-REVO or 1/16 Summit.



Fits:

  • Traxxas 1/16 E-REVO Front & Rear
  • Traxxas 1/16 SUMMIT Front & Rear
  • HPI Savage XS Flux Front & Rear
  • 1/10 Scale Buggies Rear


Specs:

  • Wheel diameter: 2.2"
  • Tire Diameter: 90 mm
  • Tire Width: 42.5 mm
  • Weight (each): 81 g
  • Hex: 12 mm
  • Tire Compound: Soft
  • Wheel finish: Black Nylon


Original Traxxas 1/16 E-REVO Tire info:

  • Diameter: 82 mm
  • Width: 46 mm
  • Total Track Width: 240 mm


Traxxas 1/16 E-REVO with Louise ST-Spider 2.2" Truck Tires:

  • Total Track Width: 260 mm (+10 mm off-set per wheel)
  • 8 mm larger diameter: you may need adjust the vehicle gearing to not overload the motor/esc
  • The added off-set may put more load on the steering servo

Produsent

LOUISERC

LOUISERC

Kunder kjøpte også

Hovedbilde Traxxas E-Revo 1/16 VXL 4WD RTR TQi TSM Blue - USB ... Hovedbilde Traxxas E-Revo 1/16 VXL 4WD RTR TQi TSM Blue - USB ...
Traxxas E-Revo 1/16 VXL 4WD RTR TQi TSM Blue - USB ...
Traxxas 71076-8-BLUE- E-Revo 1/16 VXL with USB-C charger & NiMH battery 1/16 E-Revo® VXL takes all the track-proven innovation of the full-size E-Revo VXL and scales it down to a convenient go-anywhere size. E-Revo's rocker-actuated suspension has been expertly adapted to 1/16 scale with its oil-filled, threaded-body GTR shocks. This superior technology provides capability, performance, and tuning functions at the absolute pinnacle of truck design. E-Revo's monocoque chassis balances strength and weight to far surpass the standards of the "mini" category. FEATURES ON 1/16 E-REVO VXL (71076-8) Traxxas Stability Management (TSM)® 7.2 volt Traxxas Power Cell NiMH battery with iD® 2-amp USB-C fast charger TQi™ 2.4 GHz transmitter and receiver 48+ kph with included NiMH battery 80+ kph with additional NiMH battery* Rocker-actuated suspension for superior handling and control Full-time 4WD Velineon® 380 brushless motor Waterproof electronics Torque-Control™ slipper clutch Sealed differentials All-terrain tires with foam inserts Class-Leading Speed Some mini-models are "fast for a mini." That's not good enough for Traxxas. The 1/16 E-Revo VXL is just plain fast. At 30+ mph with the included 6-cell NiMH battery, E-Revo VXL is faster than most mini models and even 1/10 scale electric RTR trucks. Install a second 6-cell battery to unleash the Velineon Brushless Power System's full fury, and E-Revo VXL jumps to over 50 mph. Velineon Brushless Power Built specifically for Traxxas 1/16 scale models, the VXL-3m™ speed control and Velineon® 380 motor represent the latest in brushless technology. Fully LiPo compatible with low-voltage detection for 2s and 3s packs and rated for 6-12 NiMH cells, this potent, powerful combo gives E-Revo VXL precise throttle control and blistering top speed. The Velineon 380 is built with high-speed ball bearings, sintered rotor, neodymium magnets, and gold plated 3.5 mm connectors. It all adds up to 50,000 rpm of pure power and speed! Battery and USB-C Charger Included! 1/16 E-Revo includes a powerful 7.2 volt 1200 mAh Traxxas Power Cell rechargeable NiMH battery pack to reach its 30+ mph top speed. Fast 2-amp charging is available virtually anywhere thanks to the included USB-C battery charger with iD® technology. Power adapter and cable sold separately. For maximum charge rate use Traxxas 2912 45-watt power adapter and 2916 100-watt power cable. The Traxxas iD system is the easiest and safest way to charge your Traxxas batteries. The charger automatically recognizes the iD battery and optimizes the charge settings as soon as you plug it in. There’s no guesswork involved, just fast, reliable charging every time. 1/16th E-REVO BRUSHLESS VXL (71076-8) SPECS: Length: 328 mm Width: 239 mm Weight: 1.09 kg Height (overall): 117 mm Wheelbase: 202 mm Front Shock Length: 48 mm Rear Shock Length: 48 mm Front Tires (pre-glued): Talon™ 2.0" Rear Tires (pre-glued): Talon™ 2.0" Front Wheels: 2.0" Gemini (black-chrome) Rear Wheels: 2.0" Gemini (black-chrome) Electronic Speed Control: Waterproof Velineon® VXL-3m™ Motor (electric): Velineon 380 brushless Transmission: Heavy duty single speed Gear Ratio (internal): 5.04:1, (reversed input: 9.72:1) Overall Drive Ratio: 9.00 (stock, out-of-box) Differential Type: Sealed, hardened steel bevel Gear Pitch: 48 pitch Chassis Structure/Material: Molded composite Nylon monocoque Brake Type: Electronic Drive System: Shaft-driven 4WD Steering: Bellcrank Radio System: TQi™ 2.4 GHz w/TSM® Top Speed: 48+ kph (80+ kph with dual batteries)* Skill Level: 2 Included Batteries: 6-cell NiMH with iD® Included Charger: 2-amp USB-C fast charger Required Batteries: 4 "AA" (transmitter) Traxxas 2080 Servo

4.595,-

4.995,-

KJØP
-8%
Hovedbilde Traxxas 7185A LED Kit Front & Rear Complete Set 1/16 ...
Traxxas 7185A LED Kit Front & Rear Complete Set 1/16 ...
LED light kit, 1/16 E-Revo® (includes power supply, front & rear bumpers, light harness (4 clear, 4 red), wire ties) Light up the track with this powerful LED light kit for the 1/16 scale E-Revo. With four LEDs on the front bumper, E-Revo blazes a path through the night. Four red LEDs in the rear bumper let you track E-Revo’s progress from behind. A tightly regulated power supply prevents flickering and dimming to keep your lights bright from the start of your run till the end. The system is fully waterproof to keep pace with your wildest adventures and the installation hardware comes with the kit.

439,-

469,-

KJØP
-6%
Hovedbilde Traxxas 7184 Wheelie Bar Assembled 1/16 E-Revo
Traxxas 7184 Wheelie Bar Assembled 1/16 E-Revo
This is the Wheelie Bar for the Traxxas 1/16 scale E-Revo. FEATURES: Nylon construction           Black in color INCLUDES: One Wheelie Bar           One 2,5x14mm Cap Head Screws           Three 2,5x8mm Cap Head Screws           Instruction Sheet REQUIRES: Installation at rear of chassis

199,-

KJØP
Hovedbilde Traxxas 8952 Stub Axle Carriers Rear (Pair) Maxx
Traxxas 8952 Stub Axle Carriers Rear (Pair) Maxx
Carriers, stub axle (left & right)

79,-

KJØP
Hovedbilde Traxxas 6448 Spur Gear 50T 1.0 Metric Pitch XO-1
Traxxas 6448 Spur Gear 50T 1.0 Metric Pitch XO-1
This is the 50T Spur Gear for the Traxxas XO-1. FEATURES: Molded plastic construction           1.0 metric pitch INCLUDES: 50T Spur Gear for the Traxxas XO-1

39,-

49,-

KJØP
-20%
Hovedbilde Traxxas 2728 Ball Bearings 5x8mm (2)
Traxxas 2728 Ball Bearings 5x8mm (2)
These bearings may be used with Traxxas vehicles or on whatever vehicle they                    will fit. PACKAGE INCLUDES:   2-Bearings SPECS:    5x8x2.5mm FEATURES:    The bearing are constructed of stainless steel

99,-

KJØP
Hovedbilde Traxxas 2552 Screws Countersunk Machine 3x12mm Revo ...
Traxxas 2552 Screws Countersunk Machine 3x12mm Revo ...
This is a package of six 3x12mm Traxxas Countersunk Hex Head Screws. FEATURES: Steel construction, Black in color           Used on the Traxxas Revo monster truck, can also be used in any             application where a 3x12mm countersunk screw is required INCLUDES: Six 3x12mm Traxxas Countersunk Hex Screws REQUIRES: 2mm hex head wrench. SPECS:    Length:  12mm           Diameter: 3mm

35,-

KJØP
Hovedbilde Traxxas 2553 Screws Countersunk Machine 3x15mm Revo ...
Traxxas 2553 Screws Countersunk Machine 3x15mm Revo ...
This is a package of six 3x15mm Traxxas Countersunk Hex Head Screws. FEATURES: Steel construction, Black in color           Used on the Traxxas Revo monster truck, can also be used in any             application where a 3x15mm countersunk screw is required INCLUDES: Six 3x15mm Traxxas Countersunk Hex Screws REQUIRES: 2mm hex head wrench. SPECS:    Length:  15mm           Diameter: 3mm

35,-

KJØP
Hovedbilde Traxxas 1747 Nylon Locknuts (10)
Traxxas 1747 Nylon Locknuts (10)
These are 4mm Locking Nuts from Traxxas. FEATURES: Stainless steel construction.           Nylon insert. INCLUDES: 10 Lock Nuts SPECS:    Size:  4mm                       

30,-

KJØP
Hovedbilde Traxxas 4930R Front Left/Right Bulkhead Gray T-Maxx ...
Traxxas 4930R Front Left/Right Bulkhead Gray T-Maxx ...
This is the Left and Right Front Bulkheads for the T-Maxx 3.3 and E-maxx. FEATURES: Fastens to front skidplate and holds front diff in place           Gray in color, constructed of hardened plastic INCLUDES: Left and Right Front Bulkheads for the T-Maxx 3.3 an E-Maxx REQUIRES: Fastening to skidplate and differential  

99,-

KJØP
Hovedbilde Traxxas 4955 Axle Pins T-Maxx (4)
Traxxas 4955 Axle Pins T-Maxx (4)
 This is the Set of Axle Pins for the Traxxas T-Maxx 4WD RTR Monster Truck.              These pins go through the stub axles on each wheel,                the wheel hubs are then placed over these pins. FEATURES: Replaces missing axle pins           Axle pins are steel   INCLUDES: Four 2.5x12mm axle pins   REQUIRES: Inserting pins through stub axles (4953) and installing wheel hubs             (4954) over pins.    

19,-

KJØP
Hovedbilde Traxxas 4928X Diff Output Yokes w/Screw Yoke Pins 2.5 ...
Traxxas 4928X Diff Output Yokes w/Screw Yoke Pins 2.5 ...
 These are the optional Differential Output Yokes        for the T-Maxx and E-Maxx and the newer 2.5 T-Maxx from Traxxas. FEATURES: Features thicker plastic for long life and durability.           These diff yokes are more rigid than the stock yokes.           Black in color.   INCLUDES: Two heavy duty diff yokes           Two yoke mounting shafts   REQUIRES: Assembly onto the truck.

59,-

KJØP
Hovedbilde Sunpadow 2S 5300mAh -100C - ERC LiPo
Sunpadow 2S 5300mAh -100C - ERC LiPo
2S 5300mAh -100C - Sunpadow ERC LiPo Sunpadow 2s 5300mAh 100C. Kraftig hardcase LiPopakke med meget høy C-rating. Passer utmerket til både on- og off-road samt crawling. Batteriet leveres i egen oppbevaringseske. Leveres uten lade/drift-kabel.   Spesifikasjoner: Kapasitet: 5300mAh Spenning: 2S 7.4V C-Rating 100C Anbefalt ladestyrke:     1C Vekt: 270gram Størrelse: 139x47x25.1mm Kontakt: 4mm gull

399,-

419,-

KJØP
-5%
Hovedbilde Traxxas 4929R Rear Left/Right Bulkhead Gray T-Maxx (2) ... Hovedbilde Traxxas 4929R Rear Left/Right Bulkhead Gray T-Maxx (2) ...
Traxxas 4929R Rear Left/Right Bulkhead Gray T-Maxx (2) ...
NB!! Fargen er grå som bilde når 2 som viser TRX 4930X.  This is the Left and Right Rear Bulkheads for the T-Maxx 3.3 an E-Maxx. FEATURES: Fastens to rear skidplate and holds rear diff in place           Constructed of hardened plastic INCLUDES: Left and Right Rear Bulkheads for the T-Maxx 3.3 REQUIRES: Fastening to skidplate and differential COMMENTS: For the 3.3 version only. Not 2,5 T-Maxx.  

99,-

KJØP
Hovedbilde Traxxas 5145 Screw Pin 4x15mm Revo (6)
Traxxas 5145 Screw Pin 4x15mm Revo (6)
This is the replacement Screw Pin Set for                  the Traxxas Nitro Revo Monster Truck. FEATURES: Metal Construction           Black in Color           Hex Head Design INCLUDES: Six 4mm x 15mm Black Metal Screw Pins. REQUIRES: Assembly onto Vehicle           2mm Hex Wrench. SPECS:    Length (Overall):   15.9mm (0.62")           Length (Threads):    6.0mm (0.23")           Diameter (Threads):  3.9mm (0.15")           Diameter (Shaft):    2.5mm (0.09")

49,-

KJØP
Hovedbilde Traxxas 5646 20T Pinion For 5mm Shaft
Traxxas 5646 20T Pinion For 5mm Shaft
This is a Traxxas 20 Tooth Pinion Gear for a 5mm Motor Shaft. FEATURES: Silver in color           Metal construction INCLUDES: (1) 20 Tooth Pinion Gear           (1) One 4mmx3.5mm set screw REQUIRES: Installation on motor shaft SPECS:    Outer Diameter: 18.0mm            Inner Diameter: 5mm (0.20")

69,-

Ikke på lager
Hovedbilde Traxxas 5650 Half Shafts E-Revo
Traxxas 5650 Half Shafts E-Revo
This is the Center Half Shaft Set for the Traxxas E-Revo and E-Maxx FEATURES: Plastic construction, black in color INCLUDES: Center half shafts (three internal splined and two external splined) REQUIRES: Installation on the vehicle SPECS:    Diameter: 17.2mm (0.68")

75,-

KJØP
Hovedbilde Traxxas 5458X Yokes Differential & Transmission
Traxxas 5458X Yokes Differential & Transmission
These are the Diff and Trans Drive Yokes for the Traxxas E-Revo, E-Maxx and T-Maxx FEATURES: Black plastic construction INCLUDES: Two drive yokes           Two 4x15mm Yoke pins REQUIRES: T-Maxx 3.3 SPECS:    Length: 15/16" (23mm)           Diameter: 3/4" (17mm)  

49,-

KJØP
Hovedbilde Traxxas 3961 Spur Gear 0.8P 68T
Traxxas 3961 Spur Gear 0.8P 68T
This is the optional .8 Metric Pitch 68 Tooth Spur Gear                            for the Traxxas E-Maxx. FEATURES: Nylon construction, black in color           .8 metric pitch INCLUDES: One 68T 0.8 metric pitch spur gear REQUIRES: Installation on the vehicle SPECS:    Diameter: 2.16" (55mm)           Thickness: .23" (6mm)

39,-

KJØP
Hovedbilde Traxxas 5644 18T 32P Pinion For 5mm Shaft
Traxxas 5644 18T 32P Pinion For 5mm Shaft
This is a Traxxas 18 Tooth Pinion Gear for a 5mm Motor Shaft. FEATURES: Silver in color           Metal construction INCLUDES: (1) 18 Tooth Pinion Gear           (1) One 4mmx3.5mm set screw REQUIRES: Installation on motor shaft SPECS:    Outer Diameter: 15.5mm (0.61")           Inner Diameter: 5mm (0.20") Pitch 32P

69,-

79,-

KJØP
-13%
Hovedbilde Traxxas 7215 Body Mounts Front/Rear 1/16 Summit VXL
Traxxas 7215 Body Mounts Front/Rear 1/16 Summit VXL
This is the Front and Rear Body Mount Set for the Traxxas VXL. FEATURES: Plastic construction Black in color INCLUDES: One front and rear body mount set REQUIRES: Installation on the Traxxas VXL

49,-

KJØP
Hovedbilde Traxxas 7235 Bumper Front/Rear & Bumper Mount Summit ...
Traxxas 7235 Bumper Front/Rear & Bumper Mount Summit ...
This is the Front and Rear Bumper set for the Traxxas Summit VXL. FEATURES: Black nylon construction           Direct replacement parts INCLUDES: One front bumper           One rear bumper           Two bumper mount plates           Two non-functioning headlights (chrome in color)           Six Clear Plastic Lenses REQUIRES: Lightning stadium truck           Mounting hardware           Decals for the headlights

79,-

KJØP
Hovedbilde Traxxas 2426 Pinion Gear 48P 26T w/Screw
Traxxas 2426 Pinion Gear 48P 26T w/Screw
This is a 26 Tooth, 48 Pitch Pinion Gear with Set Screw                                from Traxxas. FEATURES: Steel construction, silver in color INCLUDES: One 26 Tooth, 48 Pitch Pinion Gear           One 3x4mm Set Screw (1.5mm hex size) REQUIRES: Installation SPECS:    Length: .42" (10.5mm)           Inside Diameter: 1/8"           Outside Diameter: .58" (14mm)  

39,-

KJØP
Hovedbilde Traxxas 2423 Pinion Gear 48P 23T w/Set Screw Steel
Traxxas 2423 Pinion Gear 48P 23T w/Set Screw Steel
This is a 23 Tooth 48 Pitch Pinion Gear By Traxxas FEATURES: Pinion gear with set screw, Silver in color INCLUDES: (1) 23 Tooth 48 Pitch Pinion Gear           (1) One 4mmx2mm set screw REQUIRES: Installation SPECS:    Outer Diameter: 14mm (9/16")           Inner Diameter: 11mm (7/16")

39,-

49,-

KJØP
-20%
Hovedbilde RPM 73162 Axle Carriers Black 1/16
RPM 73162 Axle Carriers Black 1/16
1/16th Scale Axle Carriers for the Traxxas e-Revo, Slash, Summit & Rally Quick Notes: – fits all versions of the 1:16 scale Slash and Revo – replaces stock Traxxas #7034 – sold in pairs (two sets will be needed to complete one full vehicle) – requires a 0.05″ or 1.25mm hex wrench (not included) for installation. Description There is very little that can be as frustrating on an R/C vehicle as slop in the suspension system. In the case of the 1/16th scale mini E-Revo and mini Slash, there is absolutely no slop adjustment for the suspension pivot balls. Once the axle carriers begin to wear at those balls, the camber, toe and caster angles don’t stay true, causing the vehicle to wander, making it very difficult to control. That is where RPM steps in. Our new 1/16th scale mini E-Revo and mini Slash Axle Carriers have a unique pivot ball retention system that locks the pivot ball in place, yet still allows for adjustment due to wear. Our system is based on a cap design, held in place with a pair of small screws. Simply slip the caps in place, tighten the flathead screws until the free play of the pivot ball is eliminated and you’re ready to go! RPM Axle Carriers have been completely redesigned for added durability and crash-survivability. RPM engineers found that the stock pivot ball opening could be reduced in size to help support the pivot ball better, meaning a significantly lower chance of pulling the ball through the hole. The redesigned overall shape and superior materials that go into our version make them the best alternative at the lowest price available! And to top it off, RPM axle carriers are marginally lighter than the stock versions! RPM Axle Carriers for the 1/16th scale Traxxas mini E-Revo and mini Slash are molded in four color options – black, green, blue and red, perfectly matching our already well-known and respected set of mini E-Revo A-arms. Designed, manufactured and molded right here in our facility in sunny Southern California!  

169,-

KJØP

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png