Hopp til innhold
Hjem / Reservedeler/Option-parts / Reservedeler Bil / Reservedeler etter Produsent / Traxxas El-Biler / Summit 1/16 VXL / Traxxas 7215 Body Mounts Front/Rear 1/16 Summit VXL

Traxxas 7215 Body Mounts Front/Rear 1/16 Summit VXL

Art.nr: TRX 7215

49,-

Traxxas

Traxxas
På lager: 3

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

This is the Front and Rear Body Mount Set for the Traxxas VXL.

FEATURES:

Plastic construction
Black in color

INCLUDES:

One front and rear body mount set

REQUIRES:

Installation on the Traxxas VXL

Produsent

Traxxas

Traxxas

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

Hovedbilde Traxxas 5894 LED Lights Front and Rear Kit Complete ... Hovedbilde Traxxas 5894 LED Lights Front and Rear Kit Complete ...
Traxxas 5894 LED Lights Front and Rear Kit Complete ...
Traxxas 5894 LED Lights Front and Rear Kit Complete Slash 2WD LED light set, complete (includes front and rear bumpers with LED light bar, rear LED harness, & BEC Y-harness) (fits 2WD Slash®) Traxxas LED light kits are built tough, with factory fit and finish for easy installation. Designed specifically for the Slash 2WD, the kit includes 4 brilliant white forward-facing LEDs and two rear-facing red LEDs to enhance rear visibility. The kit is fully waterproof, and includes everything needed for installation.

549,-

649,-

KJØP
-15%
Hovedbilde Vapex VPLIPBAGD Charging Bag-D Li-Po 125x64x50mm Hovedbilde Vapex VPLIPBAGD Charging Bag-D Li-Po 125x64x50mm
Vapex VPLIPBAGD Charging Bag-D Li-Po 125x64x50mm
VAPEX LiPo-Safe Bag-D 125x64x50mm Protect your family and home from the potential hazard of LiPo charging. This LiPo Safe Bag is designed to limit and contain the fire caused by incorrectly or poorly functioning LiPo's, especially during charging but also during storage. We urge all customers to always practice extreme caution when charging and never leave a charging battery unattended! Features: Perfect for 1/16-1/18 car batteries, 1-2s Shorty LiPo's and smaller airplane batteries Fits inside the storage Bag-E Velcro Flap Size: 125x64x50mm Warning: Never leave batteries unattended while being charged Always ensure the battery and the LiPo Safe Bag is placed on a non-flammable surface such as concrete Always seal the LiPo Safe Bag while charging The LiPo Safe Bag is intended to reduce the chances of damage in the event of a LiPo fire

79,-

89,-

KJØP
-11%
Hovedbilde Traxxas 7158 Rocker Arm Post Progressive-2/Plastic ...
Traxxas 7158 Rocker Arm Post Progressive-2/Plastic ...
This is the Progressive-2 Rocker Arm Post Set for use on the              Traxxas 1/16 scale E-Revo and Slash VXL 4WD Vehicles. FEATURES: Nylon construction           Grey in color INCLUDES: Two Rear Rocker Arm Posts           Two Front Rocker Arm Posts           Eight Nylon Bearings REQUIRES: Installation on the vehicle

65,-

Ikke på lager
Hovedbilde Traxxas 7154 Wheel Hubs Hex/Axle Pins VXL (4)
Traxxas 7154 Wheel Hubs Hex/Axle Pins VXL (4)
These are the Wheel Hubs and Axle Pins for use on the                 Traxxas 1/16 E-Revo and Slash VXL Vehicles. FEATURES: Nylon construction           Black in color INCLUDES: Four Wheel Hubs           Four 1.5x8mm Axle Pins REQUIRES: Installation on the vehicle SPECS:    Hex Size: 12mm

39,-

KJØP
Hovedbilde Traxxas 7250R Driveshafts Center Front/Rear 1/16 ...
Traxxas 7250R Driveshafts Center Front/Rear 1/16 ...
These are the optional Steel Driveshafts for the Traxxas Summit VXL and all Traxxas 1/16 cars. FEATURES: Hardened steel construction INCLUDES: Center, Front and Rear Driveshafts

399,-

429,-

KJØP
-7%
Hovedbilde Traxxas 7043 Steering arm (upper & lower)/ steering ... Hovedbilde Traxxas 7043 Steering arm (upper & lower)/ steering ...
Traxxas 7043 Steering arm (upper & lower)/ steering ...
This is the Steering Arm for use on the                   Traxxas 1/16 E-Revo and Slash Vehicles. FEATURES: Nylon construction           Black in color INCLUDES: Upper and Lower Steering Arm           Steering Link           Servo Horn           Servo Saver           Servo Saver Spring           Servo Horn Mount           Two Ball Studs           Front and Rear Shock Mounts           Four 2.5x18mm Cap Head Screws REQUIRES: Installation on the vehicle

149,-

Ikke på lager
Hovedbilde Traxxas 3932 Flat Head Machine Hex Drive Screws 3x6mm ...
Traxxas 3932 Flat Head Machine Hex Drive Screws 3x6mm ...
These are the 3x6mm Flathead Machine Screws used on the                     Traxxas T-Maxx 3.3 RTR. FEATURES: Constructed of steel, black in color INCLUDES: Six 3x6mm Flathead Machine Screws REQUIRES: 2.5mm hex wrench. SPECS:    Length: 6mm           Diameter: 3mm COMMENTS: Can be used in any application where a screw of this size is needed.

35,-

KJØP
Hovedbilde Traxxas 3931 Flat Head Machine Hex Drive Screws 3x8mm ...
Traxxas 3931 Flat Head Machine Hex Drive Screws 3x8mm ...
These are the Traxxas Flathead 3 x 8mm Screws. FEATURES: Metal construction           Black in color INCLUDES: Six 3 x 8mm Flathead Hex Screws REQUIRES: Installation on the vehicle

35,-

Ikke på lager
Hovedbilde Traxxas 3352R Rebuild Kit Velineon 3500
Traxxas 3352R Rebuild Kit Velineon 3500
This is the Rebuild Kit for the Traxxas Velineon                         3500 Brushless motor - TRX 3351  FEATURES: Improves performance of an old motor           Step-by-step instruction sheet guides you through the process INCLUDES: Two 5 x 11 x 4mm Bearings           One 5 x 7 x 13mm Brass Bushing           One 5 x 7 x 5.6mm Brass Bushing           Four 2.5 x 5mm Button Head Screws (1.5mm hex size) REQUIRES: Removal of old parts and installation of new parts following the            included instruction sheet COMMENTS: For the replacement motor rotor order TRX 3353                               For the replacement motor cover endbell order TRX 3354   020334335203

149,-

KJØP
Hovedbilde Traxxas 3743 Steering Bellcrank
Traxxas 3743 Steering Bellcrank
These are Steering Bellcranks and Draglinks for the                       Traxxas Rustler and Stampede. FEATURES: White Plastic Construction INCLUDES: One Bellcrank           One Link           One Arm REQUIRES: Rustler of Stampede COMMENTS: None  

49,-

KJØP
Hovedbilde Traxxas 7047R Spur Gear 55T VXL
Traxxas 7047R Spur Gear 55T VXL
        This is the optional 55T Spur Gear for use on the                 Traxxas 1/16 E-Revo and Slash VXL Vehicles. FEATURES: Nylon construction           Black in color INCLUDES: One 55T Spur Gear REQUIRES: Installation on the vehicle SPECS:    Outer Diameter: 30mm (1.2")           Inner Diameter: 5.5mm (0.22")           Width: 7.2mm (0.28")

39,-

KJØP
Hovedbilde RPM 80699 Suspension Arms Front Red (2+2) 1/16 E-Revo ... Hovedbilde RPM 80699 Suspension Arms Front Red (2+2) 1/16 E-Revo ...
RPM 80699 Suspension Arms Front Red (2+2) 1/16 E-Revo ...
Suspension Arms Front Red (2+2) 1/16 E-Revo replaces TRX 7131 Quick Notes: – replaces stock Traxxas #7131 – matching Rear A-arms available – matching Axle Carriers available Upon the release of the Traxxas 1/16th Scale Mini E-Revo, we immediately started receiving requests for durability upgrades. What better place to start than the front A-arms? With our guaranteed unbreakable material and a proven A-arm design based off of our larger, 1/10th scale Revo A-arms, durability for these little monsters has arrived! A siginificant problem we have been able to eliminate was slop in the suspension system. In some cases, we found as much as 1/32” of slop in the stock A-arms! That has been remedied with these new RPM versions. Our A-arms eliminate nearly all of the A-arm slop, which allows camber, caster and toe angle settings to be more solidly fixed in position. The result: A smoother, more consistent steering and suspension system with a significantly reduced tendency for the truck to randomly wander while driving. Unique to RPM suspension arms is our angled leading and trailing edges. We incorporate a 30-degree bevel in these areas, which reduces the chance of breaking suspension parts since the A-arm will naturally try to transition over objects instead of bluntly plowing into them. RPM front A-arms for the Traxxas Mini E-Revo are sold in sets of four – both upper and both lower a-arms.

199,-

KJØP
Hovedbilde Traxxas 2514 Sponsor Decal Sheet
Traxxas 2514 Sponsor Decal Sheet
     This is a Sponsor Decal Set for R/C Cars                                 from Traxxas. FEATURES: These decals are designed to be used on any scale lexan R/C car and             truck bodies.           Pressure sensitive, peel and stick vinyl decals.           These are the contingency/sponsorship decals that are used on race             cars.           Logos include: Traxxas, Lunati Cams, Hedman Hedders, Simpson, MSD,             Mr. Gasket, NOS, Accel, Hurst, and more.           Multi-purpose decal set is appropriate for any type of car. INCLUDES: One Sponsor Decal Set. SPECS:    Length: 9-1/8" (23.2cm)           Width:  5-1/8" (13.0cm)

59,-

KJØP
Hovedbilde RPM 80694 Suspension Arms Front Green (2+2) 1/16 ... Hovedbilde RPM 80694 Suspension Arms Front Green (2+2) 1/16 ...
RPM 80694 Suspension Arms Front Green (2+2) 1/16 ...
Suspension Arms Front Green (2+2) 1/16 E-Revo replaces TRX 7131 Quick Notes: – replaces stock Traxxas #7131 – matching Rear A-arms available – matching Axle Carriers available Upon the release of the Traxxas 1/16th Scale Mini E-Revo, we immediately started receiving requests for durability upgrades. What better place to start than the front A-arms? With our guaranteed unbreakable material and a proven A-arm design based off of our larger, 1/10th scale Revo A-arms, durability for these little monsters has arrived! A siginificant problem we have been able to eliminate was slop in the suspension system. In some cases, we found as much as 1/32” of slop in the stock A-arms! That has been remedied with these new RPM versions. Our A-arms eliminate nearly all of the A-arm slop, which allows camber, caster and toe angle settings to be more solidly fixed in position. The result: A smoother, more consistent steering and suspension system with a significantly reduced tendency for the truck to randomly wander while driving. Unique to RPM suspension arms is our angled leading and trailing edges. We incorporate a 30-degree bevel in these areas, which reduces the chance of breaking suspension parts since the A-arm will naturally try to transition over objects instead of bluntly plowing into them. RPM front A-arms for the Traxxas Mini E-Revo are sold in sets of four – both upper and both lower a-arms.

199,-

KJØP
Hovedbilde Traxxas 5831A Lower Chassis Low CG Blue
Traxxas 5831A Lower Chassis Low CG Blue
This is the Lower Chassis for use with the  optional Traxxas #5830 Slash 2WD Low CG Conversion Kit.     FEATURES Plastic construction, blue in color  Fastens under front section of low CG chassis   INCLUDES Lower Chassis in Blue   SPECIFICATIONS  Length: 5.6" (142mm)  Width: 3.1" (79mm) at widest point   COMMENTS Must be used with the #5830 Low CG Conversion Kit. Will not fit on  stock Slash 2WD chassis.

75,-

KJØP
Hovedbilde Yeah Racing YB6048B/S10 RC PTFE Bearing 15x21x4mm ...
Yeah Racing YB6048B/S10 RC PTFE Bearing 15x21x4mm ...
Yeah Racing RC PTFE Bearing 15x21x4mm 10pcs Feature: RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings. Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by Aircraft quality steel. Pre-lubricated to ensure its excellent performance! These high quality bearings outweigh the other low quality one: Aircraft quality material More durable Higher precision Specification: Yeah Racing RC PTFE Bearing (5x10x3mm) Material: Metal Include: Bearing (10Pcs) * Photo for Reference Only Tips on Cleaning & Lubricating Ball Bearings (RC Bearing Tips) Tips for Handling New Ball Bearing: Most competition RC racers will clean the grease on the new ball bearings and apply ball bearing oil on them. (i.e. Yeah Racing High Speed Bearing Oil / Lube #YA-0215). As re-oiling the ball bearing allows the RC cars to run smoother and makes the bearings more durable. Tips for Maintaining Old Ball Bearing: By removing the old bearing oil, it will reduce the friction in the bearing, thus making RC car run faster. Below are some tips in cleaning the ball bearings. Preparation: High Speed Bearing Oil / Lube (#YA-0215) Universal Cleaning Case (#YA-0223) Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021) Step 1: Cleaning Soak the ball bearings with volatile degreaser (i.e. brake cleaner) / apply motor spray on them. Step 2: Shake & Soak Shake the bearing case vigorously to remove dirt. It will loosen and remove the dirt trapped inside the bearings. Soak the bearings for another 15-30 minutes. Repeat the process until the oil / liquid is clean. Step 3: Drying Step 4: Re-greasing Dry the ball bearing with hot air gun / hair blower to prevent rusting of the bearing. Apply light oil on the bearings, give it about 20 minutes to penetrate the seals and then clean the outsides up. Finish: Bearing Testing Tool: This tool can test the smoothness of the bearing. Put the bearing on the tool and turn the bearing to check its smoothness. If the bearing does not turn smoothly, then it¡¦s time to get a new one. Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021)

129,-

KJØP
Hovedbilde Yeah Racing YB6026B/S10 RC PTFE Bearing (12x18x4mm)
Yeah Racing YB6026B/S10 RC PTFE Bearing (12x18x4mm)
Yeah Racing RC PTFE Bearing (12x18x4mm) Feature: RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings. Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by Aircraft quality steel. Pre-lubricated to ensure its excellent performance! These high quality bearings outweigh the other low quality one: Aircraft quality material More durable Higher precision Specification: Yeah Racing (#YB6026BS/10) RC Telfon Bearing (12x18x4mm) Material: Metal Include: Bearing (10Pcs) * Photo for Reference Only Tips on Cleaning & Lubricating Ball Bearings (RC Bearing Tips) Tips for Handling New Ball Bearing: Most competition RC racers will clean the grease on the new ball bearings and apply ball bearing oil on them. (i.e. Yeah Racing High Speed Bearing Oil / Lube #YA-0215). As re-oiling the ball bearing allows the RC cars to run smoother and makes the bearings more durable. Tips for Maintaining Old Ball Bearing: By removing the old bearing oil, it will reduce the friction in the bearing, thus making RC car run faster. Below are some tips in cleaning the ball bearings. Preparation: High Speed Bearing Oil / Lube (#YA-0215) Universal Cleaning Case (#YA-0223) Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021) Step 1: Cleaning Soak the ball bearings with volatile degreaser (i.e. brake cleaner) / apply motor spray on them. Step 2: Shake & Soak Shake the bearing case vigorously to remove dirt. It will loosen and remove the dirt trapped inside the bearings. Soak the bearings for another 15-30 minutes. Repeat the process until the oil / liquid is clean. Step 3: Drying Step 4: Re-greasing Dry the ball bearing with hot air gun / hair blower to prevent rusting of the bearing. Apply light oil on the bearings, give it about 20 minutes to penetrate the seals and then clean the outsides up. Finish: Bearing Testing Tool: This tool can test the smoothness of the bearing. Put the bearing on the tool and turn the bearing to check its smoothness. If the bearing does not turn smoothly, then it¡¦s time to get a new one. Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021)

119,-

139,-

KJØP
-14%
Hovedbilde Yeah Racing YB6016B/S10 RC PTFE Bearing (6x12x4mm)
Yeah Racing YB6016B/S10 RC PTFE Bearing (6x12x4mm)
Yeah Racing RC PTFE Bearing (6x12x4mm) Feature: RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings. Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by Aircraft quality steel. Pre-lubricated to ensure its excellent performance! These high quality bearings outweigh the other low quality one: Aircraft quality material More durable Higher precision Specification: Yeah Racing (#YB6016BS/10) RC Telfon Bearing (6x12x4mm) Material: Metal Include: Bearing (10Pcs) * Photo for Reference Only Tips on Cleaning & Lubricating Ball Bearings (RC Bearing Tips) Tips for Handling New Ball Bearing: Most competition RC racers will clean the grease on the new ball bearings and apply ball bearing oil on them. (i.e. Yeah Racing High Speed Bearing Oil / Lube #YA-0215). As re-oiling the ball bearing allows the RC cars to run smoother and makes the bearings more durable. Tips for Maintaining Old Ball Bearing: By removing the old bearing oil, it will reduce the friction in the bearing, thus making RC car run faster. Below are some tips in cleaning the ball bearings. Preparation: High Speed Bearing Oil / Lube (#YA-0215) Universal Cleaning Case (#YA-0223) Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021) Step 1: Cleaning Soak the ball bearings with volatile degreaser (i.e. brake cleaner) / apply motor spray on them. Step 2: Shake & Soak Shake the bearing case vigorously to remove dirt. It will loosen and remove the dirt trapped inside the bearings. Soak the bearings for another 15-30 minutes. Repeat the process until the oil / liquid is clean. Step 3: Drying Step 4: Re-greasing Dry the ball bearing with hot air gun / hair blower to prevent rusting of the bearing. Apply light oil on the bearings, give it about 20 minutes to penetrate the seals and then clean the outsides up. Finish: Bearing Testing Tool: This tool can test the smoothness of the bearing. Put the bearing on the tool and turn the bearing to check its smoothness. If the bearing does not turn smoothly, then it¡¦s time to get a new one. Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021)

89,-

99,-

KJØP
-10%
Hovedbilde Yeah Racing YB6010B/S10 RC PTFE Bearing (4x10x4mm) ...
Yeah Racing YB6010B/S10 RC PTFE Bearing (4x10x4mm) ...
Yeah Racing RC PTFE Bearing (4x10x4mm) 10pcs Features: RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings. Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by Aircraft quality steel. Pre-lubricated to ensure its excellent performance! These high quality bearings outweigh the other low quality one: Aircraft quality material More durable Higher precision   Specifications: Yeah Racing RC Telfon Bearing (4x 10x 4mm) Material: Metal   Includes: Bearing (10Pcs)   Tips on Cleaning & Lubricating Ball Bearings (RC Bearing Tips) Tips for Handling New Ball Bearing: Most competition RC racers will clean the grease on the new ball bearings and apply ball bearing oil on them. (i.e. Yeah Racing High Speed Bearing Oil / Lube #YA-0215). As re-oiling the ball bearing allows the RC cars to run smoother and makes the bearings more durable. Tips for Maintaining Old Ball Bearing: By removing the old bearing oil, it will reduce the friction in the bearing, thus making RC car run faster. Below are some tips in cleaning the ball bearings. Preparation:   High Speed Bearing Oil / Lube (#YA-0215) Universal Cleaning Case (#YA-0223) Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021) Step 1: Cleaning Soak the ball bearings with volatile degreaser (i.e. brake cleaner) / apply motor spray on them. Step 2: Shake & Soak Shake the bearing case vigorously to remove dirt. It will loosen and remove the dirt trapped inside the bearings. Soak the bearings for another 15-30 minutes. Repeat the process until the oil / liquid is clean. Step 3: Drying Step 4: Re-greasing Dry the ball bearing with hot air gun / hair blower to prevent rusting of the bearing. Apply light oil on the bearings, give it about 20 minutes to penetrate the seals and then clean the outsides up. Finish: Bearing Testing Tool: This tool can test the smoothness of the bearing. Put the bearing on the tool and turn the bearing to check its smoothness. If the bearing does not turn smoothly, then it¡¦s time to get a new one. Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021)

69,-

89,-

KJØP
-22%
Hovedbilde Traxxas 5832A Chassis LCG Blue Slash 2WD
Traxxas 5832A Chassis LCG Blue Slash 2WD
Chassis LCG Blue Slash 2WD

229,-

249,-

KJØP
-8%
Hovedbilde Traxxas 7123 Wing white 1/16 E-Revo
Traxxas 7123 Wing white 1/16 E-Revo
Wing, 1/16 E-Revo (white)/ decal sheet The E-Revo VXL includes a black High-Downforce Wing as standard equipment; to personalize and customize the look of your machine, the wing is also offered in Bright White and Traxxas’ exclusive Exo-Carbon finish for the high-tech look of carbon fiber with the light weight and crash resistance of flexible plastic. Side-dam decals and Traxxas logos are also included.

79,-

KJØP
Hovedbilde Traxxas 3743G Steering Bellcranks Alu Green
Traxxas 3743G Steering Bellcranks Alu Green
Steering bellcranks, drag link (green-anodized 6061-T6 aluminum)/ 5x8mm ball bearings (4)/ hardware (assembled)

379,-

399,-

KJØP
-5%
Hovedbilde RPM 80604 Rear Upper/Lower A-Arms Green Traxxas Mini ... Hovedbilde RPM 80604 Rear Upper/Lower A-Arms Green Traxxas Mini ...
RPM 80604 Rear Upper/Lower A-Arms Green Traxxas Mini ...
RPM Rear A-arms for 1/16 E-Revo - Green Replaces stock Traxxas #7132 Quick Notes: Replaces stock Traxxas #7132 Matching Front A-arms available Matching Axle Carriers available Similar to RPM front A-arms, our rear arms eliminate nearly all of the A-arm slop typically found in stock Mini E-Revo rear A-arms, allowing camber and toe angle settings to be more solidly fixed in position. The result: A smoother, more consistent suspension system with a significantly reduced tendency for the truck to randomly wander while driving. RPM rear suspension arms match the same design elements as our fronts using angled leading and trailing edges. By incorporating a 30-degree bevel in these areas, we reduce the chance of breaking suspension parts since the A-arms will naturally try to transition over objects instead of bluntly plowing into them. RPM Mini E-Revo rear A-arms are sold in sets of four – both upper and both lower A-arms. These miniature E-Revo A-arms, like all RPM molded products.

165,-

KJØP
Hovedbilde Traxxas 8218 Floor Pans Left and Right TRX-4
Traxxas 8218 Floor Pans Left and Right TRX-4
Floor pans, left & right

99,-

KJØP
Hovedbilde Traxxas 5689 LED Lights Front Harness Summit
Traxxas 5689 LED Lights Front Harness Summit
This is the Front LED Light Harness for use on the                   Traxxas Summit Truck 1/10 FEATURES: JST Connector           Clear LED Lights INCLUDES: Four LED Lights           Two Zip Ties REQUIRES: Installation on the vehicle

99,-

KJØP

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png