Hopp til innhold

Traxxas 3834 Propeller plastic

Art.nr: TRX 3834

85,-

Traxxas

Traxxas

På lager: 2

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

 

Propeller plastic

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

Traxxas 30WT/350cSt Premium Shock Oil 60ml New from Traxxas is a complete line of premium silicone shock oil. Available in seven steps of viscosity, this 100% pure silicone oil allows precise vehicle suspension tuning for maximum performance, no matter where you drive. The precision-pour, the twist-nozzle cap makes it quick and easy to fill shock bodies, without all the mess. cSt viscosity specification ensures consistent performance with every bottle. Features: Seven precise viscosities ranging from 200cSt to 1000cSt (20wt to 80wt) 100% silicone oil for maximum consistency Precision-pour, twist-nozzle cap Specs: Viscosity: 30WT (350cSt) Bottle size: 60ml

99,-

109,-

KJØP
-9%
Battery, Power Cell, 3000mAh (NiMH, 6-C flat, 7.2V)

469,-

489,-

KJØP
-4%
Upper deck/ upper hook/ 3x8mm washerhead machine screw (1)

239,-

KJØP
This is the Traxxas Power Cell 11.1V 5000mAh 25C 3S LiPo Battery.     FEATURES Semi rigid construction does not require a hard case and eliminates  wire harness connectors that can loosen and fail  Engineered specifically to fit Traxxas models  New high current connector with gold-plated copper terminals and  integrated balance connector  iD Auto Battery Identification allows Traxxas iD equipped chargers to  automatically set and optimize charge settings for specific battery  MAXX cable high-efficiency 12 gauge silicone jacketed wire   INCLUDES Traxxas Power Cell 11.1V 5000mAh 25C LiPo 3S Battery with High  Current Connector and Integrated Balance Plug   REQUIREMENTS LiPo compatible charger such as the Traxxas EZ-Peak Plus,  LiPo charging bag   SPECIFICATIONS  Configuration: 3S1P  Continuous Discharge: 25C (125A)  Max Burst Rate: 50C (250A)  Watt Hours: 55.5  Charge Rate: 1C (5A)  Max Charge Rate: 2C (10A)  Dimensions: 6.1 x 1.02 x 1.7" (155 x 26 x 44mm)  Weight: 13.3oz (376g)   COMMENTS ALWAYS use a LiPo-approved Charger  ALWAYS use a LiPo Cell Balancer  NEVER Charge over 4.20V per cell  NEVER Charge at currents greater than 1C  NEVER Trickle Charge  NEVER allow to Discharge below 3.2V per cell  NEVER disassemble or modify pack wiring in any way or puncture cells  NEVER place on combustible materials or leave unattended during  charging  ALWAYS Charge in a fireproof location  ALWAYS set charger's output volts to match battery volts  ALWAYS keep out of reach of children

995,-

1.095,-

KJØP
-9%
This is a Team Traxxas Decal Set for R/C Cars                                 from Traxxas. FEATURES: These decals are designed to be used on any scale lexan R/C car and             truck bodies.           Pressure sensitive, peel and stick vinyl decals.           Decals include: yellow, black, red, purple and yellow/orange Traxxas             logos, Traxxas From Start To Finish (checkered flags) logos, TRX             logos, two fuel fillers, four hood pins.           Multi-purpose decal set is appropriate for any type of car. INCLUDES: One Team Traxxas Decal Set. SPECS:    Length: 12-1/4" (31.1cm)           Width:  9-1/4"  (23.5cm)

69,-

Ikke på lager
Left/Right Steering Arm

69,-

KJØP
DynoMAX Connector Adapter T-Plug (male) - Tamiya (male) This is an practical connector adapter for batteries with an T-Plug connector where you want to change it to an Tamiya connector without soldering etc. It also works if you have an charge lead with an Tamiya connector but you have an vehicle with a T-Plug connector system.

35,-

KJØP
  Bullet Connector Diameter: 4mm Bullet Connector Length: 12.5mm Total Length: 18.5mm Max Wire Diameter: 3mm Outer Diameter: 4.75 mm

209,-

KJØP
Stinger Performance Motor Powerful, Stinger 20-turn modified motor, 30% faster than the typical stock motor! A "20-turn" single (which is the designation of the Stinger motor) indicates that a single thickness of wire is wound 20 times around the armature of the electric motor. The less times the wire is wound; the faster the motor will go. The thickness of wire around the armature determines how much torque the motor puts out. So, a 20-turn double would provide more torque than the 20-turn single. Remember, a more modified motor must be geared properly in order to achieve its maximum performance and may also eat up your battery causing you to have shorter run times. The Stinger motor is a mild modified motor that gives you alot of speed and still gives you around 6-10 minutes of run time, depending on how you have your car set-up and what kind of batteries you are using.

249,-

269,-

KJØP
-7%
Performance & Reliability Built with high-quality components and coupled with cutting-edge firmware, the Seaking 60A V3.1 is featured by unmatched performance and reliability. Multiple safety adjustable options are in use, with the implementation of the low-voltage cutoff protection, thermal protection and throttle signal loss protection.   Efficient Cooling System The Hobbywing patented heat-conductive copper bar cover on the power board of the Seaking 60A V3.1 can efficiently and effectively transfer heat to the integrated CNC machined billet aluminum water cooled heat sink housing thus keeping your ESC as cool as possible.   Waterproof Design and Built-in BEC 100% waterproof without the need of extra protection. The built-in switch mode BEC with a maximum output of 6Amp and voltage of 6V make this ESC compatible with high voltage servo.   Special Algorithm Design The special algorithm implemented in the ESC make the acceleration more incredible and sailing more stable.   Separate PRG/FAN Port The separate PRG/FAN port on the ESC can connect ESC to a program box (via the trio-color programming cable) and start ESC programming. Specifications Brushed/Brushless: BL Waterproof: Yes Cont./Peak Current: 120A/720A Input: 2-6S LiPo, 6-18 Cells NiMH BEC Output: Linear Mode:6V/5A Wires & Connectors Input Wires:  Red-12AWG-200mm*1 Black-12AWG-200mm*1 Output Wires: Black-12AWG-150mm*3 Input Connectors: No Output Connectors: No (Note: All the wire length above is the original length not the length you see from the outside.) ESC Programing via Transmitter: Supported LED Program Box: Supported LCD Program Box: Not Supported WiFi Module: Not Supported Program Port: Separate Program Port Firmware Firmware Upgrade: Not Supported Size & Weight Size: 68.5x39.4x32mm I.D./O.D. of the Water Cooling Pipe: Ф3.0/5.4 mm Weight: 150g Applications Boat Length <110cm   Installation & Connection Connect the ESC, motor, receiver, battery and servo according to the wiring diagram below (Picture 1/2). Three wires from the ESC to the motor have no polarity, so you can connect them freely. Please recheck all the connections and ensure they are correctly connected before proceeding to step 2. (And you may find it’s necessary to swap two wires if the motor runs in reverse.) For safety, please always keep the propeller away from human body or any other objects. Red color input wire is positive pole, Black color input wire is negative pole. 1) Picture 1 is for Seaking-30A-V3, Seaking-60A-V3 and other ESCs that work with one LiPo battery pack; that is a wiring diagram with 1 battery pack. 2) Picture 2 is for Seaking-120A-V3, Seaking-180A-V3, Seaking-130A-HV-V3(without switch) and other ESCs that may work with two LiPo battery packs; that is the wiring diagram with 2 battery packs.

1.095,-

KJØP
FR/RR C-CAarrier 4mm Screws

69,-

KJØP
Axle w/pin

59,-

KJØP
Servo Saver Unit

115,-

KJØP
This is the stock 42x59 Propeller for the Spartan Boat from Traxxas. FEATURES: Black nylon construction INCLUDES: One 42x59 propeller REQUIRES: Installation on propeller shaft SPECS:    Shaft Diameter: 4mm

59,-

KJØP
Outdrive housing/ propeller shaft/bushings (self-lubricating) (2)

39,-

KJØP
Traxxas 38104-8-GRN - Blast RC Boat RTR with 6-cell NiMH battery & USB-C charger - Green Blast delivers speed, fun, and quality with a feature list you might not expect from such an affordable boat. Blast comes fully assembled and ready to make waves with a TQ™ 2.4 GHz radio system for precise control, stable 24-inch deep-V hull, and powerful water-cooled Stinger™ motor. Blast’s included USB-C and 12-volt DC chargers gets you out on the water and having fun the Traxxas way—fast! QUICK FEATURES ON BLAST (38104-8): TQ™ 2.4 GHz radio system 7.2 V NiMH battery 4-amp USB-C Fast Charger 4-amp 12-volt DC Peak Detecting Fast Charger Installed water cooling system Waterproof electronics Sealed receiver box Nautica™ waterproof electronic speed control High-torque waterproof servo Full-color factory-applied decals 24-inch deep-V hull TQ 2.4 GHz Radio System Switch on the power and go! That's all there is to it with the TQ™ 2.4 GHz radio system. There are no frequencies to manage, so the focus is on having fun. Race multiple boats side by side without interference. The TQ's advanced programming provides long-range control with smooth, glitch-free performance. The TQ's ergonomic design is comfortable for all day boating with an internal antenna that is impervious to damage. Fast Charging Anywhere Blast includes a powerful 7.2 volt 3000 mAh Traxxas Power Cell rechargeable NiMH battery and two chargers for maximum convenience. Charge in the field with the included 12-volt peak-detecting fast charger or the included 4-amp 45+ watt USB-C battery charger with iD® technology. Power adapter and cable sold separately. For maximum charge rate use Traxxas 2912 45-watt power adapter and 2916 100-watt power cable. The Traxxas iD system is the easiest and safest way to charge your Traxxas batteries. The charger automatically recognizes the iD battery and optimizes the charge settings as soon as you plug it in. There’s no guesswork involved, just fast, reliable charging every time. BLAST (38104-8) SPECS: Hull Type: High performance modified "V" Dead Rise Angle: 20° Hull Length: 603 mm Width: 146 mm Weight: ­793 gr Draft: 83 mm Speed Control Type: Nautica™ waterproof ESC Charger: 4-amp USB-C fast charger & 4-amp 12-volt DC Peak Detecting Fast Charger Battery: Traxxas 6-cell NiMH battery with iD® Motor (electric): Water-cooled 540 Stinger™ (20-turn) Drive System: Direct drive Outdrive: Adjustable surface-piercing Radio System: Traxxas TQ 2.4 GHz (2-channel) Skill Level: 1

2.795,-

2.895,-

KJØP
-3%
These are the Pivot Balls and Pivot Ball Caps for use on the                  Traxxas 1/16 E-Revo and Slash VXL Vehicles. FEATURES: Steel constructed pivot balls           Black nylon pivot ball caps INCLUDES: Four Pivot Balls           Four Pivot Ball Caps REQUIRES: Installation on the vehicle's suspension

59,-

69,-

KJØP
-14%
8.4V 4000 mAh NiMH Stick-Pack Battery with T-Connector Specs: Battery: 7-cell 8.4V NiMH Stick Pack Capacity: 4000 mAh Connector: T Wires: 14AWG Fast Charge: 3A Peak Slow Charge: 400mAh 12-16 hours Size: L156 x W44.9 x H22.8 mm Weight: 441 g

469,-

KJØP
Adapter, T-plug han - Traxxas hun

59,-

Ikke på lager
 This is Tamiya Color Spray Lacquer for Polycarbonate (PS-9 Green).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.

109,-

KJØP
  This is Tamiya Color Spray Lacquer for Polycarbonate (PS-5 Black).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.

109,-

119,-

KJØP
-8%
This is the Front and Rear Body Mount Set for the Traxxas VXL. FEATURES: Plastic construction Black in color INCLUDES: One front and rear body mount set REQUIRES: Installation on the Traxxas VXL

49,-

KJØP
This is a 6 pack of Traxxas 2.5X8mm Cap Head Screws. FEATURES: Steel construction           Black in color           Cap head design INCLUDES: (6) 2.5X8mm cap head screws SPECS:    Length:         5/16"   (8mm)           Diameter:       3/32"   (2.5mm

35,-

KJØP
This is the Traxxas GTR Shock Rebuild Kit. FEATURES: Renews two GTR shocks INCLUDES: Four O-Rings           Two Bladders           Six E-Clips           Four Hollow Balls           Two Shock Rod Ends           Two Pistons           Two Spacers REQUIRES: Installation in shocks

59,-

KJØP
Disse passer Traxxas 1/16 biler.   These are Replacement Traxxas Body Clips.          They can be used on Traxxas or most other brands of cars. FEATURES: Metal clips are silver in color INCLUDES: Twelve body clips SPECS:    Length: aprrox. 7/8"  

25,-

35,-

KJØP
-29%
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png