Hopp til innhold
Hjem / Reservedeler/Option-parts / Reservedeler Bil / Reservedeler etter Produsent / BSD Biler / Diverse deler BSD / BSD 903-015 Left/Right Steering Arm

BSD 903-015 Left/Right Steering Arm

Art.nr: 903-015

69,-

BSD

BSD
** Ikke på lager

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Left/Right Steering Arm

Produsent

BSD

BSD

Kunder kjøpte også

Hovedbilde BSD 903-065 FLAT CROSS SCREW(TPF2.6*10)
BSD 903-065 FLAT CROSS SCREW(TPF2.6*10)
FLAT CROSS SCREW(TPF2.6*10)

19,-

KJØP
Hovedbilde BSD 908-004 FRONT BUMPER UPPER BRACKET
BSD 908-004 FRONT BUMPER UPPER BRACKET
FRONT BUMPER UPPER BRACKET

59,-

KJØP
Hovedbilde BSD 704-22 B-Head Cross Screw(BT3*14) 12psc
BSD 704-22 B-Head Cross Screw(BT3*14) 12psc
B-Head Cross Screw(BT3*14) 12psc

19,-

KJØP
Hovedbilde Liko Pro 4200mAh 7.2v NiMh Deans plug
Liko Pro 4200mAh 7.2v NiMh Deans plug
Kvalitets NiMh pakke med meget høye utladings egenskaper! Rimelig pakke som leverer! Kapasitet på 4200 mAh Spenning er 7.2V DEANS CONNECTOR Lengde: 135mm Høyde:    24mm Bredde:   46mm

399,-

KJØP
Hovedbilde Flysky FS-GT3B 2.4GHZ Transmitter Hovedbilde Flysky FS-GT3B 2.4GHZ Transmitter
Flysky FS-GT3B 2.4GHZ Transmitter
Programmerbar 2,4 GHz-rattradio for bil eller båt. En veldig bra bil og båt radio til en gunstig pris. GT-3B er en programmerbar rattradio med tre kanaler. Radioen sender på 2,4 GHz-båndet, noe som gir en mye sikrere signaloverføring og dette eliminerer forstyrrelser. Via LCD-displayet kan du raskt stille inn radioen slik du ønsker for akkurat ditt kjøretøy og lage de avanserte innstillinger for ABS-brems, dual rate, reversering, servokontroll m.m. Radioen har 10 modellminner. Mål 315x159x99 mm. Vekt 328 g. Leveres med mottaker og bindingskontakt. Manual på Engelsk medfølger. Key Features – Model Memory – Servos NOR/REV – Steering Trim – Throttle Trim – Dual Rate – End Point – ABS Settings – EXP Settings – Trainer Port (for VRC) – CE & FCC certified Specification – Channels : 3 Channels – Model type : car/boat – RF range : 2.40-2.48GHz – Bandwidth : 500Hz – Band : 160 – RF power : less than 20DB – 2.4G system : AFHDS – Code type : GFSK – Sensitivity : 1024 – Low voltage warning : yes(less than 9V) – DSC por t: yes(3.5mm:output:PPM) – ST range : 90 – TH range : 45(F:30;B:15) – Charger port : yes – Power : 12V DC(1.5AA*8) – Weight : 328g – ANT length : 26mm – Size : 159 x 99 x 315mm – Color : black – Certificate : CE,FCC Includes : – 1 x 2.4Ghz transmitter – 1 x 2.4Ghz Receiver – 1 x Bind Plug

699,-

849,-

KJØP
-18%
Hovedbilde Traxxas 1747R Nuts 4mm Flanged Nylon Locking (4)
Traxxas 1747R Nuts 4mm Flanged Nylon Locking (4)
These are the 4mm Flanged Nylon Locknuts from Traxxas. FEATURES: Aluminum construction anodized blue in color           Serrated on the back for sure grip INCLUDES: Four 4mm Flanged Nylon Locknuts REQUIRES: 6mm nut driver SPECS:    Hole Diameter: 4mm           Hex Size: 6mm

99,-

109,-

Ikke på lager
-9%
Hovedbilde BSD 205-011 Front tire unit touring car
BSD 205-011 Front tire unit touring car
BSD tire unit, for the BSD 1/10 touring car. 12 mm hex.

109,-

KJØP
Hovedbilde BSD 903-018 Fr.Lower Susp.Arm-LF/RT
BSD 903-018 Fr.Lower Susp.Arm-LF/RT
 Fr.Lower Susp.Arm-LF/RT

69,-

KJØP
Hovedbilde Traxxas 7758G Wheel Nuts 17mm Alu Green (4)
Traxxas 7758G Wheel Nuts 17mm Alu Green (4)
Wheel nuts, splined, 17mm, serrated (green-anodized) (4)

149,-

159,-

KJØP
-6%
Hovedbilde BSD 221-018 Spur Diff Unit
BSD 221-018 Spur Diff Unit
BSD  221-018 Spur Diff Unit   MERKE BSD MODELL 221T Giant Racer Buggy (Børste), 222R Giant Racer Truggy, 222T Giant Racer Truggy (Børste)

389,-

429,-

KJØP
-9%
Hovedbilde Traxxas 7836 Steering Blocks L&R (Pair) XRT, X-Maxx
Traxxas 7836 Steering Blocks L&R (Pair) XRT, X-Maxx
Steering Blocks L&R (Pair) XRT, X-Maxx Steering blocks, left & right These left and right steering blocks were redesigned and beefed-up for XRT™. Standard in XRT, they can be used to upgrade X-Maxx® for extreme duty and maximum strength. (Steering blocks require 5196A inner bearings)

99,-

109,-

KJØP
-9%
Hovedbilde Hobbywing EzRun Combo MAX10 G2 80A - 3652SD 4100kV G3 ... Hovedbilde Hobbywing EzRun Combo MAX10 G2 80A - 3652SD 4100kV G3 ...
Hobbywing EzRun Combo MAX10 G2 80A - 3652SD 4100kV G3 ...
Hobbywing Ez-Run Max10 G2 80A ESC & 3652SD G3 4100KV Motor Combo - 2-3S LiPo   ESC Sensor Upgrade, Great Throttle Response Smart technology increases heat dissipation effectiveness Larger capacitor built-in, double explosion-proof Smart freewheeling technology, higher efficiency Data logging, convenient IP67 protection, all-weather use Upgraded sensor-mode with great throttle response The EzRun Max10 G2 ESC features and improved waterproof sensored cable interface and an upgraded sensored mode to achieve a great sense of throttle respons and perfectly matches the EzRun 3652SD/3565SD G3 motors. Supports Turbo timing adjustment of up to 32 degrees, and in combination with the EzRun 3652/3665 G3, the maximum speed is 25% more. Turbo timing adjustments: 32 Degrees Speed is significantly increased up to 25% Compared to the previous generation, the MAX10 G2 has a stronger explosive force and a more stable output power, and at the same time, it has excellent low-speed linearity. Large built-in capacitor = Double explosion proof Compared to the previous generation of the Max10 ESC, the total capacitance of the capacitors are increased by 74% and is overheat protected. Improved power delivery from the battery to the ESC to avoid it from overloading and causing the capacitors to explode. Smart freewheeling technology, higher efficiency The new smart freewheeling technology enables the Max10 G2 to have higher drive efficiency that the earlier generation, resulting in lower operation temperatures and a minimum temperature of approximately 25°C lower that the previous generation. Data logging, convenient After connecting the ESC with the OTA Bluetooth module, you can view the data (throttle amount, voltage, current, temperature, speed and etc) in real time through the mobile app to know the running status; The history of the running status can also be viewed by data logging. ESC IP67 protection, all-weather use The IP-67 waterproof system guarantees excellent waterproof and dustproof protection. The whole power system is able to drive on a variety of surfaces including mud, sand, ice, snow and water without damaging the power unit. Note: The ESC also supports motor with ordinary sensored mode interface. Cables to be purchased separately. ESC Specs: Scale: 1/10 Type: Brushless/Sensored Waterproof: Yes (IP67) Cont./Peak Load: 180/520A Input Voltage: 2-3S LiPo BEC: 6/7.4V @ 5A Input Wires: 12AWG Output Wires: 12AWG Input Connector: XT60 Output Connector: 4mm Gold (female bullet) Fan Size: 25x25x10mm Size: 53x39.5x37.2mm Weight: 120g Firmware Upgrade: Supported ESC Programming via: SET Button on ESC: No LED Program Box: Supported LCD Program Box (G2): Supported Programming Port: Separate ESC Applications: 1/10 Vehicles: Short Course Tryucks, Stadium Trucks, & Monster Trucks (Light Loads) KV Rating 2S LiPo: ≤6000kV KV Rating 3S LiPo: ≤4200kV 3652 size motor   EZRUN 3652SD-3300KV G3 Sensored Motor The new generation adds performance. The evolution of a sensored motor, increases performance. The EzRun 3652/3665 SD G3 features an improved waterproof sensored cable interface and an upgraded sensored mode to achieve motor temperature protection and perfectly matches the EzRun MAX10 G2 ESC.   Motor Features: Chip built in the motor, when matched with Hobbywing EZRUN MAX10 G2 esc, it not only has perfect compatibility, the ESC can automatically identify the motor and build a pure/full sensor mode power system, providing better manipulating performance and more delicate manipulating feel. Compared with the previous generation motor, the output power and efficiency are increased by more than 3%. Under the same load, the motor temperature is effectively reduced. The independent high-precision encoder always outputs pure rotor position signal, which effectively avoids the interference of sensor signal and makes the motor work stably in sensor state. CNC machined aluminum housing, high purity copper windings, advanced rotor structure, 0.2mm silicon steel laminations, high-quality stainless steel output shaft, high-precision bearing for high durability and smoothness. The innovative new sensor interface and rubber cover bearing have better waterproof and dust-proof effect than the traditional sensor motor. Powerful hardware configuration, efficiency is greatly improved The high-precision Hall sensor components ensures that the rotor position output is always accurate and consistent, achieving excellent linearity and a great throttle control. The EzRun 3652/3665 G3 motor adopts a high precision bearing that is waterproof in the front end of the motor. The rear end of the motor uses precision iron cover with a smaller structure to improve the capacity, and at the same time, provides a higher bearing speed while keeping resistance low. The operation is smoother and more reliable. Compared to the G2 motor: The overall efficiency is increased by 3% More effective while the maximum output power has increased by 5% The motor temperature is greatly reduced under the same load conditions The stable power and high output of the motor, makes throttle control for maneuvers (power wheelies, straight line power, and clearing jumps) much easier. Design, quality materials, durable All the materials used on the EZRUN 3652/3665 G3 motor (Motor casing, bearings, ultra-thin silicon steel sheets, high temperature-resistance copper wire, explosion-proof rotor, high-tolerance alloy shaft) are carefully selected and approved by our in-house engineers. Hobbywing is serious in providing users with an extraordinary performance for a long period of time. The motor adopts a modular detachable structure design for easy disassembly and daily maintenance. This helps to prolong the lifespan of the motor and maintaining the efficiency of the motor simple. Applicable to All Weather & Track Conditions The IP-67 waterproof system guarantees excellent waterproofing and dustproofing protection. The whole power system is able to drive on a variety of surfaces including mud, sand, ice, snow and water without damaging the power unit. Note, the bearings are not IP rated. Motor Specs: Scale: 1/10 Type: Sensored/Brushless Pole Count: 4 KV Rating: 4100 LiPo Cells: 2-3S No-load Current: ≤5A Diameter: 37mm Length: 53mm Shaft Diameter: 3.17mm (1/8") Weight: 228g Front Bearing: D13xD5xT4mm (not IP rated) Rear Bearing: D11xD5xT5mm (not IP rated) Applications: 1/10; On-road/Off-road, Short Course 2WD Truck (Light Loads)

1.659,-

1.859,-

KJØP
-11%
Hovedbilde Traxxas 7896 Driveshaft Steel Maxx WideMaxx, XRT
Traxxas 7896 Driveshaft Steel Maxx WideMaxx, XRT
Driveshaft, steel constant velocity (shaft only, 190.3mm) (1) (for use with #7895 X-Maxx® WideMaxx® suspension kit)

229,-

239,-

KJØP
-4%
Hovedbilde Traxxas 7727R Bulkhead Rear Upper X-Maxx, XRT
Traxxas 7727R Bulkhead Rear Upper X-Maxx, XRT
Traxxas 7727R Bulkhead, rear (upper) (fits X-Maxx® 8s or XRT™) Rear upper bulkhead fits 8s X-Maxx® and XRT™ Replacement part for these models: XRT™ X-MAXX™ 8s

69,-

KJØP
Hovedbilde Traxxas 1654R Wheel Hubs Steel Hex 12mm (2)
Traxxas 1654R Wheel Hubs Steel Hex 12mm (2)
Wheel hubs, hex (steel) (2)/ axle pins (2)

69,-

KJØP
Hovedbilde Bronto XH Balanseringsforlenger 3s - 20cm Hovedbilde Bronto XH Balanseringsforlenger 3s - 20cm
Bronto XH Balanseringsforlenger 3s - 20cm
Praktisk kabel for å forlenge balanseringskontakten på batterier med XH balanseringskontakt. Gjør det enklere å få sikret ladingen i lipo-ladeposer, eller å lade batteriet uten å ta det ut av modellen. Spesifikasjoner Type XH For antall seller 3s Ledning 22AWG Lengde 20cm

49,-

KJØP
Hovedbilde Vant Battery 11.1V 6000mAh 60C Deans – XH
Vant Battery 11.1V 6000mAh 60C Deans – XH
6000mAh-3S1P-60C 11.1V Discharging connector: “Deans”  Softcase Størrelse:      155x 48x 27mm Lengde:                     155mm Lende med ledningen: 160mm Høyde:                         27mm Bredde:                        48mm Bredde med ledningen: 48mm (der ledingen kommer ut på siden) Cable length: 125mm Vekt : 432 gram

895,-

995,-

KJØP
-10%
Hovedbilde BSD 909-005M Motor Gear 11T/M3 Screw
BSD 909-005M Motor Gear 11T/M3 Screw
Hard metall pinjong til BSD sin Monster Truck Børste og Børste løs (909 & 706T) Og Buggy Børste og børsteløs. (701G & 701G-R) Dette er biler i scala 1:10 Denne brukes sammen med 45-MPO021M

109,-

KJØP
Hovedbilde DynoMAX 9843 Connector Adapter T-Plug (male) - Tamiya ... Hovedbilde DynoMAX 9843 Connector Adapter T-Plug (male) - Tamiya ...
DynoMAX 9843 Connector Adapter T-Plug (male) - Tamiya ...
DynoMAX Connector Adapter T-Plug (male) - Tamiya (male) This is an practical connector adapter for batteries with an T-Plug connector where you want to change it to an Tamiya connector without soldering etc. It also works if you have an charge lead with an Tamiya connector but you have an vehicle with a T-Plug connector system.

35,-

KJØP
Hovedbilde Traxxas 5733 Propeller 42x59mm Spartan
Traxxas 5733 Propeller 42x59mm Spartan
This is the stock 42x59 Propeller for the Spartan Boat from Traxxas. FEATURES: Black nylon construction INCLUDES: One 42x59 propeller REQUIRES: Installation on propeller shaft SPECS:    Shaft Diameter: 4mm

59,-

KJØP
Hovedbilde BSD 903-031 Servo Saver Unit
BSD 903-031 Servo Saver Unit
Servo Saver Unit

115,-

KJØP
Hovedbilde Hobbywing Seaking 120A V3 2-6S Watercooled Boat ESC
Hobbywing Seaking 120A V3 2-6S Watercooled Boat ESC
Performance & Reliability Built with high-quality components and coupled with cutting-edge firmware, the Seaking 60A V3.1 is featured by unmatched performance and reliability. Multiple safety adjustable options are in use, with the implementation of the low-voltage cutoff protection, thermal protection and throttle signal loss protection.   Efficient Cooling System The Hobbywing patented heat-conductive copper bar cover on the power board of the Seaking 60A V3.1 can efficiently and effectively transfer heat to the integrated CNC machined billet aluminum water cooled heat sink housing thus keeping your ESC as cool as possible.   Waterproof Design and Built-in BEC 100% waterproof without the need of extra protection. The built-in switch mode BEC with a maximum output of 6Amp and voltage of 6V make this ESC compatible with high voltage servo.   Special Algorithm Design The special algorithm implemented in the ESC make the acceleration more incredible and sailing more stable.   Separate PRG/FAN Port The separate PRG/FAN port on the ESC can connect ESC to a program box (via the trio-color programming cable) and start ESC programming. Specifications Brushed/Brushless: BL Waterproof: Yes Cont./Peak Current: 120A/720A Input: 2-6S LiPo, 6-18 Cells NiMH BEC Output: Linear Mode:6V/5A Wires & Connectors Input Wires:  Red-12AWG-200mm*1 Black-12AWG-200mm*1 Output Wires: Black-12AWG-150mm*3 Input Connectors: No Output Connectors: No (Note: All the wire length above is the original length not the length you see from the outside.) ESC Programing via Transmitter: Supported LED Program Box: Supported LCD Program Box: Not Supported WiFi Module: Not Supported Program Port: Separate Program Port Firmware Firmware Upgrade: Not Supported Size & Weight Size: 68.5x39.4x32mm I.D./O.D. of the Water Cooling Pipe: Ф3.0/5.4 mm Weight: 150g Applications Boat Length <110cm   Installation & Connection Connect the ESC, motor, receiver, battery and servo according to the wiring diagram below (Picture 1/2). Three wires from the ESC to the motor have no polarity, so you can connect them freely. Please recheck all the connections and ensure they are correctly connected before proceeding to step 2. (And you may find it’s necessary to swap two wires if the motor runs in reverse.) For safety, please always keep the propeller away from human body or any other objects. Red color input wire is positive pole, Black color input wire is negative pole. 1) Picture 1 is for Seaking-30A-V3, Seaking-60A-V3 and other ESCs that work with one LiPo battery pack; that is a wiring diagram with 1 battery pack. 2) Picture 2 is for Seaking-120A-V3, Seaking-180A-V3, Seaking-130A-HV-V3(without switch) and other ESCs that may work with two LiPo battery packs; that is the wiring diagram with 2 battery packs.

1.095,-

KJØP
Hovedbilde DynoMAX 9572 Connector Bullet 4mm Male 10pcs Hovedbilde DynoMAX 9572 Connector Bullet 4mm Male 10pcs
DynoMAX 9572 Connector Bullet 4mm Male 10pcs
  Bullet Connector Diameter: 4mm Bullet Connector Length: 12.5mm Total Length: 18.5mm Max Wire Diameter: 3mm Outer Diameter: 4.75 mm

209,-

KJØP
Hovedbilde Traxxas 1275 Stinger motor 20t
Traxxas 1275 Stinger motor 20t
Stinger Performance Motor Powerful, Stinger 20-turn modified motor, 30% faster than the typical stock motor! A "20-turn" single (which is the designation of the Stinger motor) indicates that a single thickness of wire is wound 20 times around the armature of the electric motor. The less times the wire is wound; the faster the motor will go. The thickness of wire around the armature determines how much torque the motor puts out. So, a 20-turn double would provide more torque than the 20-turn single. Remember, a more modified motor must be geared properly in order to achieve its maximum performance and may also eat up your battery causing you to have shorter run times. The Stinger motor is a mild modified motor that gives you alot of speed and still gives you around 6-10 minutes of run time, depending on how you have your car set-up and what kind of batteries you are using.

249,-

269,-

KJØP
-7%
Hovedbilde Traxxas 3834 Propeller plastic
Traxxas 3834 Propeller plastic
  Propeller plastic

85,-

KJØP

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png