Traxxas

Liko Pro 4200mAh 7.2v NiMh Deans plug

Art.nr: 61-1000

399,-

Modelsport AS

Modelsport AS

På lager: 2

Du vil motta en e-post så snart produktet er på lager!

En feil har oppstått. Prøv igjen

Informasjon
Produsent

Informasjon

Kvalitets NiMh pakke med meget høye utladings egenskaper! Rimelig pakke som leverer!

Kapasitet på 4200 mAh

Spenning er 7.2V

DEANS CONNECTOR

Lengde: 135mm

Høyde: 24mm

Bredde: 46mm

Produsent

Modelsport AS

Modelsport AS

Kunder kjøpte også

Hovedbilde Robotronic 01222 RAZER TEN BRUSHLESS ESC 60A 2-3S

Robotronic 01222 RAZER TEN BRUSHLESS ESC 60A 2-3S

Robotronic 01222 RAZER TEN BRUSHLESS ESC 60A 2-3S Key Features Completely waterproof and dustproof ON / OFF switch with setup button S-BEC with 6V and 3A peak current Plug and Play, battery and motor plug already soldered Multiple protections: undervoltage shutdown, thermal protection and protection against signal loss. Simple programming via set button Separate programming port, easy connection of the LED program card (optional) What’s in the Box 1x ESC with battery and motor wires Product Description Whether 1/10 on-road or 1/10 off-road, the Razer ten ESCs are always the first choice for reliability, efficiency and durability. With a full range of settings and programming options all configurations needs are possible. All cables are already wired ready for connection, no soldering necessary. The battery connector is a T-style plug and the motor has 4mm sockets. MERKE Robitronic PRODUKT Fartskontroller FOR Bil TYPE Børsteløs

899,-

Hovedbilde Tamiya/ Hobbywing 1060 RTR 60A Brushed ESC WP

Tamiya/ Hobbywing 1060 RTR 60A Brushed ESC WP

Easy Operation This ESC is specially designed for new beginners and intermediate modelers; it not only carries forward the outstanding quality of HOBBYWING products but simplifies the operation. Applicable to All Weather Conditions The waterproof and dust-proof design allows the QUICRUN WP-1060 Brushed to be used in all weather conditions without any issue of damage caused to the ESC from water or dust. High Reliability & Durability Reliable hardware combined with advanced software technology allows the QUICRUN WP 1060 Brushed to not only provide high power output but also overload protection of the ESC circuit. Easy to Use This ESC features auto throttle calibration and parameter setting via jump caps is easy-to-use, especially applicable to new beginners. Wide Application This ESC is designed for 1/10th scale touring cars, buggies, short-course trucks, monster trucks, trucks, crawlers and tanks. Waterproof Cont./Peak Current - 60A/360A Input - 2-3S LiPo/5-9 Cells NiMH BEC Output - Switch Mode:6V/3A Motor Limit - 2S Lipo or 6 NiMH - 540 or 550 Size Motor: 12T or RPM 30000 - 7.2V 3S Lipo or 9 NiMH - 540 or 550 Size Motor: 18T or RPM 20000 - 7.2V Input Wires - Red-16AWG-100mm/Black-16AWG-100mm Output Wires - Blue-16AWG-100mm/Yellow-16AWG-100mm Input Connectors - Big-sized TAMIYA Connector Output Connectors - 4.0 Bullet Connectors (Female) Size - 36.5x32.0x18.0mm Weight - 39g Motors - Brushed Motors Suitable for: 1/10 Touring Car, Buggy, Short Course, Truck, Monster, Truggy, Rock Crawler and Tank. This item is supplied in supass packaging. It is a 100% genuine HobbyWing speed controller..

399,-

429,-

-7%

Hovedbilde Traxxas 3934A Body Clips Heavy Duty Black (12)

Traxxas 3934A Body Clips Heavy Duty Black (12)

Body clips, heavy duty (black) (12)

39,-

49,-

-20%

Hovedbilde Traxxas 3924 Receiver Box

Traxxas 3924 Receiver Box

Box, receiver (sealed)/ foam pad/ silicone grease/2.5x8mm BCS (2)/ 3x10mm CCS (2)/ 3x15mm CCS (2) Sealed receiver box for Traxxas micro receivers. Includes foam pad, silicone seal, grease, 3x10 mm screws (2), 2.5x8 mm screws, and 3x15 mm screws (2).

149,-

169,-

-12%

Hovedbilde Traxxas 4945 Steering Bellcranks E-Maxx

Traxxas 4945 Steering Bellcranks E-Maxx

This is the replacement Steering Bellcrank Set for the Traxxas #3903 & 3908 E-Maxx. FEATURES: Composite nylon construction, black in color Replaces a worn or damaged bellcrank set INCLUDES: One Left Bellcrank Lower One Left Bellcrank Upper One Right Bellcrank One Draglink One Spring Cap One Servo Saver Spring Two 3x12mm Shoulder Screws (2.5mm hex size) Six 3x15 Button Head Cap Screws (2mm hex size) One Black Nylon Spacer Two White Nylon Spacer REQUIRES: Assembly and installation following the model manual (a installation sheet is included for T-Maxx and #3906 E-Maxx installations)

149,-

Hovedbilde Yeah Racing TRX4-019 Brass Front or Rear Portal Cover ...

Hovedbilde Yeah Racing TRX4-019 Brass Front or Rear Portal Cover ...

Yeah Racing TRX4-019 Brass Front or Rear Portal Cover ...

Briefs: (#TRX4-019) Brass Front or Rear Portal Cover 42g 2 pcs For Traxxas TRX-4 Get more from your tires with this Brass made portal cover by adding weight exerted onto your tires when compared to the stock plastic items! Easy to remember with etched weight on the face of the cover. *Photos for reference only. For: Traxxas TRX-4 Material: Brass Color: Brass Brass Front or Rear Portal Cover (2 pcs)

529,-

549,-

-4%

BSD 810-060 Body Mount

Body Mount

39,-

Hovedbilde Vant 3300mAh 7.2v NiMh Deans plug

Vant 3300mAh 7.2v NiMh Deans plug

Kvalitets NiMh pakke med meget høye utladingsegenskaper! 7.2v 3300mah Standard StickPack NiMh med T-Plugg/Deans 3300mAh 7,2V Nimh batteri som passer i de fleste rc-produkter som benytter standard stick pakker, slik som bil, båt, fly, startere m.m Leveres med Dean/T-kontakt, skal det brukes på ett produkt med annen batterikobling kan overgang benyttes. Lengde 136mm Bredde 46.6mm Høyde 24.2mm Vekt 420gram inkludert ledning og plugg

299,-

319,-

-6%

Hovedbilde DynoMAX 9843 Connector Adapter T-Plug (male) - Tamiya ...

Hovedbilde DynoMAX 9843 Connector Adapter T-Plug (male) - Tamiya ...

DynoMAX 9843 Connector Adapter T-Plug (male) - Tamiya ...

DynoMAX Connector Adapter T-Plug (male) - Tamiya (male) This is an practical connector adapter for batteries with an T-Plug connector where you want to change it to an Tamiya connector without soldering etc. It also works if you have an charge lead with an Tamiya connector but you have an vehicle with a T-Plug connector system.

35,-

Hovedbilde Kyosho 34405T2B SandMaster 2.0 1:10 Readyset Type 2 ...

Hovedbilde Kyosho 34405T2B SandMaster 2.0 1:10 Readyset Type 2 ...

Kyosho 34405T2B SandMaster 2.0 1:10 Readyset Type 2 ...

Easy to drive and maintain This is the definitive 2WD buggy! The power and control of the EZ series Sand Master 2.0 delivers excellent handling for thrilling off-road and on-road driving. With its 2.4GHz R/C specifications, automatic frequency allocation makes racing against multiple cars easy to manage. The maintenance-friendly design relies on fewer parts and the body structure can be efficiently assembled or disassembled with the included tools (L-shaped and cross-shaped wrenches). This Readyset includes fully assembled chassis with body set finished with decals applied, making it an ideal first model for newcomers to the exhilarating fun of electric R/C buggies, as well as a great fun-to-drive machine for more experienced drivers. ●Gearbox with built-in differential gear delivers smooth cornering and features larger modules for greater durability. ●FRP dust plate between the motor and motor mount keeps the gearbox clean by shutting out dust sucked in by the motor. ●Compatible with many optional parts available for previous Sand Master versions. ●Factory-completed Readyset only requires 4 x AA batteries for the transmitter, chassis battery and battery charger for operation. Racy color scheme features eye-catching yellow pipe frame in a distinctive sand buggy design with snap on panels that can be quickly removed for easy maintenance. Front and rear double-wishbone suspension with adjustable ride height combines with pre-filled oil shocks to deliver dynamic off-road buggy performance. Battery can be removed from the back of the chassis without removing the body. In addition, nearly all screws are 2.0mm hex heads that not only allow easy assembly or disassembly, but also reliable screw torque for secure tightening.Equipped with G22 brushed 540-size motor with easy to manage power settings.Motor mount features mounting holes corresponding to the pinion gear, increasing ground clearance while eliminating the need for backlash adjustments. Steering servo saver with integrated coil spring improves handling while preventing damage to the servo in hard contact. Included 6kg waterproof steering servo provides strong holding position as well as sharp response for tight control and stability. Equipped with waterproof KYOSHO SPEED HOUSE KA040-71W 40A electronic speed controller (ESC) which is compatible with both NiMH and LiPo batteries and features Super Plug (Deans) specifications that reduce power loss. Dual-purpose tires demonstrate high grip on all surfaces, from off-road to on-road. Included 2.4GHz Syncro KT-232P transmitter is easy for beginners to use. Frequency bands are automatically allocated, and trims/reverse/steering dual rate can be adjusted. KIT CONTENT ●Completed chassis with R/C radio installed ●Factory assembled body complete with color scheme ●Syncro KT-232P transmitter ●Binding Stick ●Hexagonal wrench ●Cross wrench REQUIREMENT TO RUN ●4 x AA batteries for transmitter ●Battery for chassis Pink Battery PP2-2200D PP2-3700D PP2-4700D ●Charger for battery for chassis ●Tools

1.995,-

2.395,-

-17%

Hovedbilde SkyRC eN18 Charger 4-8S NiMH T-Plug 240VAC

Hovedbilde SkyRC eN18 Charger 4-8S NiMH T-Plug 240VAC

SkyRC eN18 Charger 4-8S NiMH T-Plug 240VAC

SkyRC eN18 NiMH Peak Charger - Compact but Versatile Want to get the most out of your batteries? You really need to make sure you can deliver a full charge to your batteries with a SkyRC eN18 Peak Charger. SkyRC eN18 is more than just a peak charger - it's a versatile peak charger capable of charging both electric car battery packs and nitro car receiver packs. This is possible because the SkyRC eN18 offers voltage ranging from 4.8 to 14.4V at 1.2 amp. You can charge 6-8 cell NiMH battery packs as found in most electric cars, trucks, and buggies. With the 1.2 amp charge rate, you can safely fast charge any 4-5 cell nitro car NiMH receiver's pack. Delta-V Peak detection With the Delta Peak detection circuitry, the SkyRC eN18 allows your batteries to reach their full capacity when charging, so you can get the most power and run time from your batteries. It achieves this by using peak detection circuitry that monitors the voltage of the battery pack while it's being charged and automatically shuts the charger off when the packs' voltage peaks and then starts to drop. This is in contrast to a timed charger, where you often end up with a battery pack that's not fully charged. Features: T-Plug Delta Peak Detection Circuitry Compact & Lightweight NiMH Compatible Maximum Output 1.2A Short-Circuit Protection Reverse-Connection Protection Universal-Voltage Input Accurate Voltage High Reliability Lower Operating Temperature High Efficiency Plug and Charge eN18 will start charging on the fly once the correct battery is plugged. Stabilized Output for Maximum Safety With the stable pulse charge, eN18 pumps a fixed 1.2A current to charge your battery reliably. All the chargers have passed the rigorous burn-in process to ensure they are durable enough to withstand use cycles and other operating conditions. Trickle Charge: Optimize the battery Like all batteries to self-discharge, NiMH batteries even have a relatively high self-discharge rate of about 1% per day. Trickle charging can keep NiMH batteries in optimal condition to replenish the charge that is continually draining off. Bi-Color LED: Easy Status at a Glance Steady RED: Standby Flashing GREEN: Charging Steady GREEN: Fully Charged Flashing RED: ERROR Specs: Dimension: 85×50×54mm Weight: 120g Input: AC100V-240V 50/60Hz Battery Type: NiMH Output Voltage: 4.8V-14.4V Output Curent: 1.2A Output Power: 18W Max Battery Cell: 4-8S Output Battery Connector: T-Plug Output Cable Length: 70cm Operating Temperature: 0℃-40℃ Relative Humidity: 5%-75% Storage Temperature: -10℃ - 70℃ Storage Humidity: 5%-75%

229,-

249,-

-8%

Hovedbilde Vant 61-1004 3300mAh 7.2v NiMh Tamiya plug

Vant 61-1004 3300mAh 7.2v NiMh Tamiya plug

Kvalitets NiMh pakke med meget høye utladings egenskaper! Rimelig pakke som leverer! Kapasitet på 3300 mAh Spenning er 7.2V TAMIYA CONNECTOR Lengde: 135mm Høyde: 24mm Bredde: 46mm

299,-

329,-

-9%

Hovedbilde Bronto Ladekabel - 4mm til T-Plug (Deans)

Bronto Ladekabel - 4mm til T-Plug (Deans)

Bronto Ladekabel - 4mm til T-Plug (Deans) Bronto ladekabler er et must for RC-entusiasten. Ladekabelen er utstyrt med kvalitets 14AWG ledninger. Ladeledningen har en praktisk lengde på 30cm, noe som er godt egnet når du f.eks skal legge batteriet trygt i en sikker ladebag mens det lades. Ladekabel med Deans plugg til 4mm bananplugger. Benyttes for lading av batterier med Deans-plugg, og kobles rett i ladere med 4mm tilkobling. Spesifikasjoner Ledning 14AWG Lengde 30cm Tilkobling 1 4mm Banan Tilkobling 2 T-plug (Deans) male

75,-

Hovedbilde SkyRC eN20 Charger NiMh 1-2-3A 4-8cells 20W 240VAC

SkyRC eN20 Charger NiMh 1-2-3A 4-8cells 20W 240VAC

SKYRC eN20 NiMH/NiCd Charger is an economic, high quality 100-240V AC charger, designed for charging NiMH and NiCad batteries from 4-8 cells. The circuit power is 20W and max charge current can reach to 3A. There are three kinds of charge current 1A/2A/3A that can be selected. You could select the proper charge current according to battery capacity. There is one LED indicating the charger status (ready to charge/charging/charge finish). The operation of the charger is also very simple. There is a toggle switch in the charger which can be used to select charge current. After you power on the charger, select the charge current, connect the battery and charger, the charger will start working. Explanation of LED Status: CHARGE LED STATUS CHARGE STATUS LED Flashes Green The Charger is Ready LED Glows Red Battery Charger in process LED Glows Green Battery charger is fully charged Specifications: AC Input Voltage: 100-240V, 50-60HZ Output Power: 20W Charging Current (Selected by Switch): 1A, 2A, 3A Battery Type (Selected by Switch): NiMH/NiCd Battery Cell Count: 4-8 cells 1 LED for Charging Status Dimension: 69.4 x 110.7 x 40.5 mm Weight: 175 g Included: eN20 Charger 240VAC adapter with Euro connector Charging lead with Tamiya connector Specifications: AC Input Voltage: 100-240V, 50-60HZ Output Power: 20W Charging Current (Selected by Switch): 1A, 2A, 3A Battery Type (Selected by Switch): NiMH/NiCd Battery Cell Count: 4-8 cells 1 LED for Charging Status Dimension: 69.5 x 110 x 40.4 mm Weight: 175 g

349,-

399,-

-13%

Hovedbilde BSD 709T 1/10 Baja Brushed Water Proof

Hovedbilde BSD 709T 1/10 Baja Brushed Water Proof

BSD 709T 1/10 Baja Brushed Water Proof

En fin 1:10 Baja Buggy med 2 WD. Bilen er sprutsikker. Leveres med sprutsikker speedcontroller, servo og mottaker. Den kommer i 2 forskjellige farger, flott dekorert i enten Orange eller Gul. Inkludert:2,4GHz Radio BSD Baja er en bakhjulsdrift 1/10th skala off-road elektrisk buggy. Med fullt justerbar fjæring, lange oljefylte støtdempere og god bakkeklaring og muligheten til å kjøre på de fleste underlag. Inkludert en 540 børstet motor med høyt dreimoment (HI-TORQUE), 1800mAh Ni-MH batteri og lader, sprutsikker ESC og sprutsikker servo med 9 kg kraft og metall gear, 2,4 GHz sender og mottaker (RX er også sprutsikker) og en justerbar ball differensial alt i én komplett RTR pakke! Spesifikasjon: Rattradio 2 kanals 2.4 GHz Lengde 400mm Bredde 260mm Høyde 125mm Motor Sprutsikker Børstet RC 550 Motor ESC 1/10 sprutsikker Børstet ESC Servo 9kg sprutsikker Servo – 9 kg Batteri 7.2V 1800mAh batteri Deans kontakt Olje Fylte Big Bore dempere med extra lang vandring Featuring: • Lett chassis plate og veltebur • Dempertårn og bærearmer i kompositt plast • Lavt tyngdepunkt for bedre håndtering • Fullt justerbar styring og fjæring geometri • Hi-dTorque børstet motor og tett girkasse • Justerbar Ball Differential • Kraftige drivaksler • Olje støtdempere med lang vandring • Hi-Torque Børstet Motor • Aluminium Motor Mount • Justerbar Ball Differential • Sprutsikker ESC • Lav friksjons kulelager

1.995,-

2.395,-

-17%

Hovedbilde Hobbywing 30404317 QuicRun Fusion SE FOC System 1800KV

Hovedbilde Hobbywing 30404317 QuicRun Fusion SE FOC System 1800KV

Hobbywing 30404317 QuicRun Fusion SE FOC System 1800KV

Hobbywing QuiqRun Fusion SE system for crawlere er et gjenomtenkt, sensorbasert, vanntett og plasseringsvennlig system hvor regulatoren er integrert i motoren. Kompatibelt med 2-3S lipo, leveres med XT60-batterikontakt. Størrelsen tilsvarer en 540-motor slik at systemet passer direkte inn i de aller fleste modeller. Fusion systemet kjennetegnes ved ekstremt stille gange og mye kraft/nøyaktighet ved lave turtall, perfekt for crawlere. Spesifikasjoner Passer for 1/10 Crawlere IP-grad IP-67 Strømtrekk Maks 40A kont. Batteri 2-3S lipo eller 6-9 cell NiMh Størrelse 36x58.1mm Aksling Diameter: 3.175mm / Lengde: 16.5mm Ledninger 14AWG 200mm Kontakt XT60 Vekt 201g inkl. ledning og kontakt Dette systemet oppdateres med LED Program Box Hobbywing Fusion SE 1800KV The Fusion SE provides an integrated space-saving design for hobbyists. FOC powered with proven design heritage FOC has been a game changer for the crawling segm ent. The extreme efﬁciency operates at lower temps and provides extended runtimes. The nearly silent operation provides amazing power and response at all speeds while providing extremely low RPM control. Compared to normal brushless, FOC systems provide a dramatic increase in response and power delivery. The smart torque output control feature of the built-in FOC ESC ensures unmatched downhill and uphill driving. The ESC can automatically adjust the motor output to RPM to match the driver inputs. Intelligent Torque Output is a smart management system that allows the ESC to adjust the motor for inclines or descent under any load to match the throttle. U-matched hill-hold function With 8 levels of drag brake force (Power) and 9 levels of Drag Brake Rate, drivers can fine-tune their vehicle’s hill-holding power and general driving. Overall, drag brakes can be 2 times stronger than normal brushless setups. Designed for Durability Silicon rubber gaskets, electronic buttons, and quality hardware ensure a long life for the Fusion SE. Made to take the abuse and conditions of daily RC bashers. Ready for all weather and track conditions IP-67 waterproof rating ensures the Fusion SE has protection from water, dust, and about anything else that gets thrown at it. Designed to withstand all conditions time and time again. Note: The IP67 protection level mentioned above is splash-resistant, water-resistant and dust-resistant under normal use, and is tested under controlled laboratory conditions. Its effect is in the GB / T 4208-2017 (domestic) / IEC 60529 (overseas) standard to IP67 level. Splash, water and dust resistance are not permanently effective, and the level of protection may decline due to aging. Do not soak for a long time to avoid damaging the product. Specifications: Type: 1/10 Brushless, Sensored, Waterproof (IP67) ESC & Motor Combo Cont./Peak Current: 40A Input Voltage: 2-3S Lipo/6-9 Cell NiMH BEC Output: 6V/7.4V @ 4A (6A peak) Motor KV: 1800KV Diameter/length of Motor: 36mm / 58.1mm Shaft diameter / exposed shaft length: 3.175mm / 16.5mm Motor Poles: 4 Firmware Upgrade: Not Supported Size: 36X58.1mm Weight: 201g (including wires & connectors) Application: 1/10 Rock crawlers Wires & Connectors: Input Wires: 14AWG-200mm Input Connectors: XT60 ESC Programing via: SET Button on ESC: Not Supported LED Program Box: Supported LCD Program Box: Not Supported OTA Programmer: Not Supported Program Port: Independent programming interface (switch position)

1.095,-

1.295,-

-15%

Hovedbilde BSD 903-074 B-Head Cross Screw(BT3*14)

BSD 903-074 B-Head Cross Screw(BT3*14)

B-Head Cross Screw(BT3*14)

19,-

Hovedbilde BSD 908-004 FRONT BUMPER UPPER BRACKET

BSD 908-004 FRONT BUMPER UPPER BRACKET

FRONT BUMPER UPPER BRACKET

59,-

Hovedbilde BSD 903-075 B-HEAD CROSS SCREW(BT3*16)

BSD 903-075 B-HEAD CROSS SCREW(BT3*16)

B-HEAD CROSS SCREW(BT3*16)

29,-

Hovedbilde BSD 902-051 Screw BT3*10 12Pcs

BSD 902-051 Screw BT3*10 12Pcs

Screw BT3*10 12Pcs

19,-

Hovedbilde BSD 704-22 B-Head Cross Screw(BT3*14) 12psc

BSD 704-22 B-Head Cross Screw(BT3*14) 12psc

B-Head Cross Screw(BT3*14) 12psc

19,-

Hovedbilde BSD 903-015 Left/Right Steering Arm

BSD 903-015 Left/Right Steering Arm

Left/Right Steering Arm

69,-

Hovedbilde Tamiya 86005 PS-5 Polycarbonate Spray Black 3 oz

Tamiya 86005 PS-5 Polycarbonate Spray Black 3 oz

This is Tamiya Color Spray Lacquer for Polycarbonate (PS-5 Black). For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies used in R/C car modeling. An appropriate amount of paint for finishing one R/C model. This paint is impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies. The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS: Net Volume: 100ml COMMENTS: Never use this paint on plastic models. Highly flammable.

109,-

119,-

-8%

Hovedbilde Tamiya 86004 PS-4 Polycarbonate Spray Blue 3 oz

Tamiya 86004 PS-4 Polycarbonate Spray Blue 3 oz

This is Tamiya Color Spray Lacquer for Polycarbonate (PS-4 Blue). For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies used in R/C car modeling. An appropriate amount of paint for finishing one R/C model. This paint is impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies. The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS: Net Volume: 100ml COMMENTS: Never use this paint on plastic models. Highly flammable.

109,-

Hovedbilde Tamiya 86002 PS-2 Polycarbonate Spray Red 3 oz

Tamiya 86002 PS-2 Polycarbonate Spray Red 3 oz

This is Tamiya Color Spray Lacquer for Polycarbonate (PS-2 Red). For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies used in R/C car modeling. An appropriate amount of paint for finishing one R/C model. This paint is impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies. The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS: Net Volume: 100ml COMMENTS: Never use this paint on plastic models. Highly flammable.

109,-