Hopp til innhold
Hjem / Reservedeler/Option-parts / Option Parts Biler / Traxxas El-Biler / Slash 4x4 VXL / Traxxas 1654R Wheel Hubs Steel Hex 12mm (2)

Traxxas 1654R Wheel Hubs Steel Hex 12mm (2)

Art.nr: TRX 1654R

69,-

Traxxas

Traxxas
** Ikke på lager

Midlertidig utsolgt – kan bestilles

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

  • Wheel hubs, hex (steel) (2)/ axle pins (2)

Produsent

Traxxas

Traxxas

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

Hovedbilde Traxxas 6549 Power Tap Telemetry + Light Kit
Traxxas 6549 Power Tap Telemetry + Light Kit
Connector, power tap (with voltage sensor)/ wire tie/ 2.6x8 BCS (2)

89,-

** Ikke på lager
KJØP
Hovedbilde Traxxas 8081 Rubber Extensions for Fender #8080 (4)
Traxxas 8081 Rubber Extensions for Fender #8080 (4)
Fender extensions (4)/ 3x8 flat-head screws (24) (requires #8080 narrow inner fenders)

179,-

På lager 2
KJØP
Hovedbilde Traxxas 8256G Portal Drive Axle Mount Rear Alu Green ...
Traxxas 8256G Portal Drive Axle Mount Rear Alu Green ...
Portal drive axle mount, rear, 6061-T6 aluminum (green-anodized) (left and right)/ 2.5x16 CS (4)

629,-

På lager 1
KJØP
Hovedbilde Traxxas 8232G Casterblock (Portal Drive) Alu Green L+R ...
Traxxas 8232G Casterblock (Portal Drive) Alu Green L+R ...
Caster blocks, 6061-T6 aluminum (green-anodized), left and right

629,-

På lager 1
KJØP
Hovedbilde Traxxas 8251G Portal Housing Outer Alu Green ...
Traxxas 8251G Portal Housing Outer Alu Green ...
Portal housings, outer, 6061-T6 aluminum (green-anodized) (2)/ 2.5x10 CS (12)

499,-

529,-

** Ikke på lager
KJØP
-6%
Hovedbilde Traxxas 8252G Portal Housing Inner Front Alu Green ...
Traxxas 8252G Portal Housing Inner Front Alu Green ...
Portal housings, inner (front), 6061-T6 aluminum (green-anodized) (2)/ 3x12 BCS (2)

669,-

** Ikke på lager
KJØP
Hovedbilde Traxxas 8269G Wheel Hubs 12mm Hex Alu Green (4) TRX-4
Traxxas 8269G Wheel Hubs 12mm Hex Alu Green (4) TRX-4
Wheel hubs, 12mm hex, 6061-T6 aluminum (green-anodized) (4)/ screw pin (4)

279,-

På lager 2
KJØP
Hovedbilde Traxxas 3945X Pinion Gear 15T-32P Hardened Steel
Traxxas 3945X Pinion Gear 15T-32P Hardened Steel
Gear, 15-T pinion (32-p), heavy duty (machined, hardened steel)/ set screw For some drivers, “heavy duty” just won’t cut it. When you drive on the ragged edge, you need parts that can withstand the brutal punishment that LiPo power can dish out. If full-throttle is the only language you know, Traxxas introduces a new line of pinion gears just for you. These gears come machined out of hardened steel in large 32-pitch format for your most hardcore bashing needs. They are available for Slash and Stampede 4X4 models as well as brushed versions of E-Revo and E-Maxx etc.

89,-

På lager 5
KJØP
Hovedbilde Traxxas 8292 Input and Output Shaft Transmission TRX-4
Traxxas 8292 Input and Output Shaft Transmission TRX-4
Input and Output Shaft Transmission TRX-4

155,-

** Ikke på lager
KJØP
Hovedbilde Traxxas 8291 Gearbox Housing TRX-4
Traxxas 8291 Gearbox Housing TRX-4
Gearbox housing (includes main housing, front housing, & cover)

155,-

** Ikke på lager
KJØP
Hovedbilde Traxxas 8290 Motor Plate and Upper Spur Gear Cover ...
Traxxas 8290 Motor Plate and Upper Spur Gear Cover ...
Plate, motor/ upper spur gear cover

39,-

På lager 1
KJØP
Hovedbilde Traxxas 8285 Gears Transfer Case (3) TRX-4
Traxxas 8285 Gears Transfer Case (3) TRX-4
Gears Transfer Case (3) TRX-4

139,-

** Ikke på lager
KJØP
Hovedbilde Traxxas 3933 Button Cap Screw 4x16 Revo (6)
Traxxas 3933 Button Cap Screw 4x16 Revo (6)
These are the 4x16mm Button Head Machine Screws from Traxxas. FEATURES: For use in the Traxxas Revo and also anywhere a screw this size is             required           Steel construction, black in color INCLUDES: Six 4x16mm Button Head Machine Screws REQUIRES: 2.5mm hex wrench SPECS:    Length: 16mm           Diameter: 4mm

39,-

På lager 5
KJØP
Hovedbilde Traxxas 6770 Tires, Maxx 2.8
Traxxas 6770 Tires, Maxx 2.8" (2)/ foam inserts (2)
Tires, Maxx 2.8" (2)/ foam inserts (2)

239,-

På lager 4
KJØP
Hovedbilde Traxxas 6483X Pinion Gear 13T 1.0M for 5mm Shaft ...
Traxxas 6483X Pinion Gear 13T 1.0M for 5mm Shaft ...
Traxxas 6483X Pinion Gear 13T 1.0M for 5mm Shaft (Machined)  

129,-

139,-

** Ikke på lager
KJØP
-7%
Hovedbilde Traxxas 9629 Tie-Bars Front Alu HD Blue Sledge
Traxxas 9629 Tie-Bars Front Alu HD Blue Sledge
Traxxas 9629 Tie bars, front, 7075-T6 aluminum (blue-anodized) (fits Sledge®) 7075-T6 is one of the strongest and most expensive aluminum alloys available. Traxxas milled these Sledge® front tie bars out of solid 7075-T6 billet for ultimate strength and durability. Beveled edges give the parts a stylish two-tone look with laser-etched logos for maximum impact. Genuine Traxxas accessories are made by Traxxas, for Traxxas, to guarantee a perfect factory fit every time with no modifications required. Build your ultimate Sledge with Traxxas 7075-T6 aluminum accessories. Accessory part for these models: Sledge®

459,-

499,-

På lager 3
KJØP
-8%
Hovedbilde RPM 70982 Bumper with Skidplate Front Sledge Hovedbilde RPM 70982 Bumper with Skidplate Front Sledge
RPM 70982 Bumper with Skidplate Front Sledge
RPM 70982 - Front Bumper & Skid Plate for Traxxas Sledge Quick Notes: Includes a longer and wider skid plate Front bumper width is 6-3/4″ (171.5mm) wide Replaces the bumper and skid plate from stock Traxxas #9535 he RPM Front Bumper and Skid Plate for the Traxxas Sledge is a unique design that works with the Sledge’s body mounting mechanism. Traxxas designed the body mounting system to move forward instead of rearward. Because it moves forward by well over 1” (25mm), it severely limits bumper design. However, RPM engineers found a way to incorporate a fully functioning bumper with this unique body mounting system. How did we do it? First, we eliminated the stock bumper and replaced it with a hinge pin retainer, since realistically, that’s all the stock bumper really is. Next, we eliminated the stock skid plate in favor of a wider, longer and more protective skid. Lastly, we bolted a unique bumper to the front of the skid plate. Our system sits below the body, which allows the body mounting system full range of motion, yet the Sledge finally has some tough, RPM front end protection. Each component is molded in black from our exclusive blend of engineering grade nylons for unmatched strength and durability. All RPM molded products are made in the USA and backed by our limited lifetime warranty against breakage. Tech Notes: The RPM Front Bumper and Skid Plate is designed specifically for the Traxxas Sledge and replaces the bumper and skid plate from stock Traxxas #9535.

269,-

På lager 3
KJØP
Hovedbilde Traxxas 6851R Driveshaft Front Slash 4x4
Traxxas 6851R Driveshaft Front Slash 4x4
This is a pair of optional Front Driveshafts                     for the 1/10 scale Traxxas Slash 4x4. FEATURES: Harddened steel construction INCLUDES: Two Front Driveshafts   Traxxas Steel Constant Velocity Shafts offer the ultimate in torque handling and efficient power transfer. The outer U-joints are lubricated and sealed by a rubber boot for maximum protection against the elements, and the U-joint pins are held captive so you never have to worry about losing a pin. Gleaming nickel-plated shafts and black silicone boots add a custom look.

799,-

949,-

På lager 1
KJØP
-16%
Hovedbilde Traxxas 6757 Rebuild Kit XO-1
Traxxas 6757 Rebuild Kit XO-1
Rebuild kit, steel-splined constant-velocity driveshafts (includes pins, dustboots, lube, and hardware) Rebuild your Traxxas steel CV driveshafts with this kit. Each kit contains the pins, dust boots, grease, and hardware to rebuild two driveshafts. Fits 1951R, 6851R, 6852R, 6451, 6452, and 9450R.  

219,-

239,-

På lager 2
KJØP
-8%
Hovedbilde Traxxas 6780 Differential Center HD Complete Hovedbilde Traxxas 6780 Differential Center HD Complete
Traxxas 6780 Differential Center HD Complete
Traxxas introduces a new heavy-duty center differential for 1/10 scale 4X4 trucks. Like the Torque-Biasing Center Drive found in the X-Maxx and E-Revo, the heavy-duty center differential replaces the stock slipper clutch to absorb shocks and improve driveline durability in high-power applications. The center differential distributes power to all four wheels for extreme 3-cell LiPo acceleration and consistent, hard launches. • Aluminum housing with hardened steel output gears • Steel spur gear • Replaces stock slipper clutch • Absorbs driveline shocks • Compatible with 3S LiPo power • Distributes power to all four wheels • Resists ballooning of unloaded wheels • Fits high or low-CG 1/10 chassis

859,-

899,-

På lager 3
KJØP
-4%
Hovedbilde Traxxas 6765R Driveshaft Center Alu Red Rustler 4x4
Traxxas 6765R Driveshaft Center Alu Red Rustler 4x4
Driveshaft, center, 6061-T6 aluminum (red-anodized) (189mm)

119,-

På lager 3
KJØP
Hovedbilde Traxxas 9014-RED Body Stampede 4x4 VXL Red Clipless
Traxxas 9014-RED Body Stampede 4x4 VXL Red Clipless
Traxxas 9014-RED Body, Stampede® 4X4 VXL, red (painted, decals applied) (assembled with front & rear body mounts and rear body support for clipless mounting) Is it time to upgrade your Stampede® 4X4 VXL with an all-new look? These tough polycarbonate bodies feature the hottest ProGraphix® paint with pre-applied decals. Stampede 4X4 bodies come fully-assembled and ready to mount with pre-installed body mounts, roof skid, rear body support, and tailgate protector. Replacement part for these models: Stampede® 4X4 VXL (Clipless)

769,-

799,-

På lager 1
KJØP
-4%
Hovedbilde Traxxas 9023 Nerf Bars Chassis Hoss 4x4
Traxxas 9023 Nerf Bars Chassis Hoss 4x4
  Nerf bars, chassis (2)

59,-

På lager 2
KJØP
Hovedbilde Traxxas 9039 Shock Tower Rear HD Black (for Upgrade ...
Traxxas 9039 Shock Tower Rear HD Black (for Upgrade ...
Shock tower, rear, extreme heavy duty, black (for use with #9080 upgrade kit) Replacement shock tower for the Extreme Heavy Duty Upgrade Kit. Shock tower is for use with the 9080 upgrade kit only and will not fit standard suspension. Accessory part for these models: Hoss® 4X4 VXL Rustler® 4X4 VXL Rustler® 4X4 Slash 4X4 Ultimate Slash 4X4 VXL Slash 4X4

69,-

På lager 3
KJØP
Hovedbilde Traxxas 9038 Shock Tower Front HD Black (for Upgrade ...
Traxxas 9038 Shock Tower Front HD Black (for Upgrade ...
Shock tower, front, extreme heavy duty, black (for use with #9080 upgrade kit) Replacement shock tower for the Extreme Heavy Duty Upgrade Kit. Shock tower is for use with the 9080 upgrade kit only and will not fit standard suspension. Accessory part for these models: Hoss® 4X4 VXL Rustler® 4X4 VXL Rustler® 4X4 Slash 4X4 Ultimate Slash 4X4 VXL Slash 4X4

79,-

På lager 2
KJØP

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png